************************************************************************** ** History ** ** REV# DATE NAME DESCRIPTION ** 1.00.00.00 3/31/2004 Erich Chen First release ** 1.10.00.04 7/28/2004 Erich Chen modify for ioctl ** 1.10.00.06 8/28/2004 Erich Chen modify for 2.6.x ** 1.10.00.08 9/28/2004 Erich Chen modify for x86_64 ** 1.10.00.10 10/10/2004 Erich Chen bug fix for SMP & ioctl ** 1.20.00.00 11/29/2004 Erich Chen bug fix with arcmsr_bus_reset when PHY error ** 1.20.00.02 12/09/2004 Erich Chen bug fix with over 2T bytes RAID Volume ** 1.20.00.04 1/09/2005 Erich Chen fits for Debian linux kernel version 2.2.xx ** 1.20.00.05 2/20/2005 Erich Chen cleanly as look like a Linux driver at 2.6.x ** thanks for peoples kindness comment ** Kornel Wieliczek ** Christoph Hellwig ** Adrian Bunk ** Andrew Morton ** Christoph Hellwig ** James Bottomley ** Arjan van de Ven ** 1.20.00.06 3/12/2005 Erich Chen fix with arcmsr_pci_unmap_dma "unsigned long" cast, ** modify PCCB POOL allocated by "dma_alloc_coherent" ** (Kornel Wieliczek's comment) ** 1.20.00.07 3/23/2005 Erich Chen bug fix with arcmsr_scsi_host_template_init ** occur segmentation fault, ** if RAID adapter does not on PCI slot ** and modprobe/rmmod this driver twice. ** bug fix enormous stack usage (Adrian Bunk's comment) ** 1.20.00.08 6/23/2005 Erich Chen bug fix with abort command, ** in case of heavy loading when sata cable ** working on low quality connection ** 1.20.00.09 9/12/2005 Erich Chen bug fix with abort command handling, firmware version check ** and firmware update notify for hardware bug fix ** 1.20.00.10 9/23/2005 Erich Chen enhance sysfs function for change driver's max tag Q number. ** add DMA_64BIT_MASK for backward compatible with all 2.6.x ** add some useful message for abort command ** add ioctl code 'ARCMSR_IOCTL_FLUSH_ADAPTER_CACHE' ** customer can send this command for sync raid volume data ** 1.20.00.11 9/29/2005 Erich Chen by comment of Arjan van de Ven fix incorrect msleep redefine ** cast off sizeof(dma_addr_t) condition for 64bit pci_set_dma_mask ** 1.20.00.12 9/30/2005 Erich Chen bug fix with 64bit platform's ccbs using if over 4G system memory ** change 64bit pci_set_consistent_dma_mask into 32bit ** increcct adapter count if adapter initialize fail. ** miss edit at arcmsr_build_ccb.... ** psge += sizeof(struct _SG64ENTRY *) => ** psge += sizeof(struct _SG64ENTRY) ** 64 bits sg entry would be incorrectly calculated ** thanks Kornel Wieliczek give me kindly notify ** and detail description ** 1.20.00.13 11/15/2005 Erich Chen scheduling pending ccb with FIFO ** change the architecture of arcmsr command queue list ** for linux standard list ** enable usage of pci message signal interrupt ** follow Randy.Danlup kindness suggestion cleanup this code ** 1.20.00.14 05/02/2007 Erich Chen & Nick Cheng ** 1.implement PCI-Express error recovery function and AER capability ** 2.implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096 ** if firmware version is newer than 1.42 ** 3.modify arcmsr_iop_reset to improve the ability ** 4.modify the ISR, arcmsr_interrupt routine,to prevent the ** inconsistency with sg_mod driver if application directly calls ** the arcmsr driver w/o passing through scsi mid layer ** specially thanks to Yanmin Zhang's openhanded help about AER ** 1.20.00.15 08/30/2007 Erich Chen & Nick Cheng ** 1. support ARC1200/1201/1202 SATA RAID adapter, which is named ** ACB_ADAPTER_TYPE_B ** 2. modify the arcmsr_pci_slot_reset function ** 3. modify the arcmsr_pci_ers_disconnect_forepart function ** 4. modify the arcmsr_pci_ers_need_reset_forepart function ** 1.20.00.15 09/27/2007 Erich Chen & Nick Cheng ** 1. add arcmsr_enable_eoi_mode() on adapter Type B ** 2. add readl(reg->iop2drv_doorbell_reg) in arcmsr_handle_hbb_isr() ** in case of the doorbell interrupt clearance is cached ** 1.20.00.15 10/01/2007 Erich Chen & Nick Cheng ** 1. modify acb->devstate[i][j] ** as ARECA_RAID_GOOD instead of ** ARECA_RAID_GONE in arcmsr_alloc_ccb_pool ** 1.20.00.15 11/06/2007 Erich Chen & Nick Cheng ** 1. add conditional declaration for ** arcmsr_pci_error_detected() and ** arcmsr_pci_slot_reset ** 1.20.00.15 11/23/2007 Erich Chen & Nick Cheng ** 1.check if the sg list member number ** exceeds arcmsr default limit in arcmsr_build_ccb() ** 2.change the returned value type of arcmsr_build_ccb() ** from "void" to "int" ** 3.add the conditional check if arcmsr_build_ccb() ** returns FAILED ** 1.20.00.15 12/04/2007 Erich Chen & Nick Cheng ** 1. modify arcmsr_drain_donequeue() to ignore unknown ** command and let kernel process command timeout. ** This could handle IO request violating max. segments ** while Linux XFS over DM-CRYPT. ** Thanks to Milan Broz's comments ** 1.20.00.15 12/24/2007 Erich Chen & Nick Cheng ** 1.fix the portability problems ** 2.fix type B where we should _not_ iounmap() acb->pmu; ** it's not ioremapped. ** 3.add return -ENOMEM if ioremap() fails ** 4.transfer IS_SG64_ADDR w/ cpu_to_le32() ** in arcmsr_build_ccb ** 5. modify acb->devstate[i][j] as ARECA_RAID_GONE instead of ** ARECA_RAID_GOOD in arcmsr_alloc_ccb_pool() ** 6.fix arcmsr_cdb->Context as (unsigned long)arcmsr_cdb ** 7.add the checking state of ** (outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT) == 0 ** in arcmsr_handle_hba_isr ** 8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer() ** 9. fix the release of dma memory for type B in arcmsr_free_ccb_pool() ** 10.fix the arcmsr_polling_hbb_ccbdone() **************************************************************************