Rockchip specific extensions to the Synopsys Designware MIPI DSI
================================

Required properties:
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
  or "rockchip,rk3368-mipi-dsi", "snps,dw-mipi-dsi".
  or "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi".
- reg: Represent the physical address range of the controller.
- interrupts: Represent the controller's interrupt to the CPU(s).
- clocks, clock-names: Phandles to the controller's APB clock(pclk) as
  described in [1].
- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
- ports: contain a port node with endpoint definitions as defined in [2].
  For vopb,set the reg = <0> and set the reg = <1> for vopl.

Optional properties
- clocks, clock-names: phandle to the mipi dsi phy config clock, name should be
  "phy_cfg".phandle to the mipi dsi phy reference clock, name should be 'ref'.
- phys: phandle to third party MIPI PHY node
- phy-names: the string "mipi_dphy" when is found in a node, along with "phys"
  attribute, provides phandle to MIPI PHY node
- resets : phandle to the reset of MIPI DSI APB Clock.
- reset-names : should be "apb".

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/media/video-interfaces.txt
[3] Documentation/devicetree/bindings/reset/reset.txt

Example:

For Rockchip RK3288:

	mipi_dsi: mipi@ff960000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
		reg = <0xff960000 0x4000>;
		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>,
			 <&cru SCLK_DPHY_TX0_CFG>;
		clock-names = "ref", "pclk", "phy_cfg";
		rockchip,grf = <&grf>;
		status = "okay";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;

			mipi_in: port {
				#address-cells = <1>;
				#size-cells = <0>;
				mipi_in_vopb: endpoint@0 {
					reg = <0>;
					remote-endpoint = <&vopb_out_mipi>;
				};
				mipi_in_vopl: endpoint@1 {
					reg = <1>;
					remote-endpoint = <&vopl_out_mipi>;
				};
			};
		};

		panel {
			compatible ="boe,tv080wum-nl0";
			reg = <0>;

			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&lcd_en>;
			backlight = <&backlight>;
			status = "okay";
		};
	};

For Rockchip RK3368:

mipi_dsi_host: mipi-dsi-host@ff960000 {
	compatible = "rockchip,rk3368-mipi-dsi";
	phys = <&mipi_dphy>;
	phy-names = "mipi_dphy";
	resets = <&cru SRST_MIPIDSI0>;
	reset-names = "apb";
	...

	ports@1 {
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <1>;

		mipi_in: port {
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_in_vop: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&vop_out_mipi>;
			};
		};
	};

	dsi_panel: panel@0 {
		compatible = "simple-panel-dsi";
		reg = <0>;
		dsi,lanes = <4>;
		...
	};
};