ARM: rockchip: rk3228: add grf definition
[firefly-linux-kernel-4.4.55.git] / include / linux / ftrace.h
1 /*
2  * Ftrace header.  For implementation details beyond the random comments
3  * scattered below, see: Documentation/trace/ftrace-design.txt
4  */
5
6 #ifndef _LINUX_FTRACE_H
7 #define _LINUX_FTRACE_H
8
9 #include <linux/trace_clock.h>
10 #include <linux/kallsyms.h>
11 #include <linux/linkage.h>
12 #include <linux/bitops.h>
13 #include <linux/ptrace.h>
14 #include <linux/ktime.h>
15 #include <linux/sched.h>
16 #include <linux/types.h>
17 #include <linux/init.h>
18 #include <linux/fs.h>
19
20 #include <asm/ftrace.h>
21
22 /*
23  * If the arch supports passing the variable contents of
24  * function_trace_op as the third parameter back from the
25  * mcount call, then the arch should define this as 1.
26  */
27 #ifndef ARCH_SUPPORTS_FTRACE_OPS
28 #define ARCH_SUPPORTS_FTRACE_OPS 0
29 #endif
30
31 /*
32  * If the arch's mcount caller does not support all of ftrace's
33  * features, then it must call an indirect function that
34  * does. Or at least does enough to prevent any unwelcomed side effects.
35  */
36 #if !defined(CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST) || \
37         !ARCH_SUPPORTS_FTRACE_OPS
38 # define FTRACE_FORCE_LIST_FUNC 1
39 #else
40 # define FTRACE_FORCE_LIST_FUNC 0
41 #endif
42
43
44 struct module;
45 struct ftrace_hash;
46
47 #ifdef CONFIG_FUNCTION_TRACER
48
49 extern int ftrace_enabled;
50 extern int
51 ftrace_enable_sysctl(struct ctl_table *table, int write,
52                      void __user *buffer, size_t *lenp,
53                      loff_t *ppos);
54
55 struct ftrace_ops;
56
57 typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
58                               struct ftrace_ops *op, struct pt_regs *regs);
59
60 /*
61  * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
62  * set in the flags member.
63  *
64  * ENABLED - set/unset when ftrace_ops is registered/unregistered
65  * GLOBAL  - set manualy by ftrace_ops user to denote the ftrace_ops
66  *           is part of the global tracers sharing the same filter
67  *           via set_ftrace_* debugfs files.
68  * DYNAMIC - set when ftrace_ops is registered to denote dynamically
69  *           allocated ftrace_ops which need special care
70  * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
71  *           could be controled by following calls:
72  *             ftrace_function_local_enable
73  *             ftrace_function_local_disable
74  * SAVE_REGS - The ftrace_ops wants regs saved at each function called
75  *            and passed to the callback. If this flag is set, but the
76  *            architecture does not support passing regs
77  *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
78  *            ftrace_ops will fail to register, unless the next flag
79  *            is set.
80  * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
81  *            handler can handle an arch that does not save regs
82  *            (the handler tests if regs == NULL), then it can set
83  *            this flag instead. It will not fail registering the ftrace_ops
84  *            but, the regs field will be NULL if the arch does not support
85  *            passing regs to the handler.
86  *            Note, if this flag is set, the SAVE_REGS flag will automatically
87  *            get set upon registering the ftrace_ops, if the arch supports it.
88  * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
89  *            that the call back has its own recursion protection. If it does
90  *            not set this, then the ftrace infrastructure will add recursion
91  *            protection for the caller.
92  * STUB   - The ftrace_ops is just a place holder.
93  * INITIALIZED - The ftrace_ops has already been initialized (first use time
94  *            register_ftrace_function() is called, it will initialized the ops)
95  */
96 enum {
97         FTRACE_OPS_FL_ENABLED                   = 1 << 0,
98         FTRACE_OPS_FL_GLOBAL                    = 1 << 1,
99         FTRACE_OPS_FL_DYNAMIC                   = 1 << 2,
100         FTRACE_OPS_FL_CONTROL                   = 1 << 3,
101         FTRACE_OPS_FL_SAVE_REGS                 = 1 << 4,
102         FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED    = 1 << 5,
103         FTRACE_OPS_FL_RECURSION_SAFE            = 1 << 6,
104         FTRACE_OPS_FL_STUB                      = 1 << 7,
105         FTRACE_OPS_FL_INITIALIZED               = 1 << 8,
106 };
107
108 struct ftrace_ops {
109         ftrace_func_t                   func;
110         struct ftrace_ops               *next;
111         unsigned long                   flags;
112         int __percpu                    *disabled;
113 #ifdef CONFIG_DYNAMIC_FTRACE
114         struct ftrace_hash              *notrace_hash;
115         struct ftrace_hash              *filter_hash;
116         struct mutex                    regex_lock;
117 #endif
118 };
119
120 extern int function_trace_stop;
121
122 /*
123  * Type of the current tracing.
124  */
125 enum ftrace_tracing_type_t {
126         FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
127         FTRACE_TYPE_RETURN,     /* Hook the return of the function */
128 };
129
130 /* Current tracing type, default is FTRACE_TYPE_ENTER */
131 extern enum ftrace_tracing_type_t ftrace_tracing_type;
132
133 /**
134  * ftrace_stop - stop function tracer.
135  *
136  * A quick way to stop the function tracer. Note this an on off switch,
137  * it is not something that is recursive like preempt_disable.
138  * This does not disable the calling of mcount, it only stops the
139  * calling of functions from mcount.
140  */
141 static inline void ftrace_stop(void)
142 {
143         function_trace_stop = 1;
144 }
145
146 /**
147  * ftrace_start - start the function tracer.
148  *
149  * This function is the inverse of ftrace_stop. This does not enable
150  * the function tracing if the function tracer is disabled. This only
151  * sets the function tracer flag to continue calling the functions
152  * from mcount.
153  */
154 static inline void ftrace_start(void)
155 {
156         function_trace_stop = 0;
157 }
158
159 /*
160  * The ftrace_ops must be a static and should also
161  * be read_mostly.  These functions do modify read_mostly variables
162  * so use them sparely. Never free an ftrace_op or modify the
163  * next pointer after it has been registered. Even after unregistering
164  * it, the next pointer may still be used internally.
165  */
166 int register_ftrace_function(struct ftrace_ops *ops);
167 int unregister_ftrace_function(struct ftrace_ops *ops);
168 void clear_ftrace_function(void);
169
170 /**
171  * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
172  *
173  * This function enables tracing on current cpu by decreasing
174  * the per cpu control variable.
175  * It must be called with preemption disabled and only on ftrace_ops
176  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
177  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
178  */
179 static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
180 {
181         if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
182                 return;
183
184         (*this_cpu_ptr(ops->disabled))--;
185 }
186
187 /**
188  * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
189  *
190  * This function enables tracing on current cpu by decreasing
191  * the per cpu control variable.
192  * It must be called with preemption disabled and only on ftrace_ops
193  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
194  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
195  */
196 static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
197 {
198         if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
199                 return;
200
201         (*this_cpu_ptr(ops->disabled))++;
202 }
203
204 /**
205  * ftrace_function_local_disabled - returns ftrace_ops disabled value
206  *                                  on current cpu
207  *
208  * This function returns value of ftrace_ops::disabled on current cpu.
209  * It must be called with preemption disabled and only on ftrace_ops
210  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
211  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
212  */
213 static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
214 {
215         WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
216         return *this_cpu_ptr(ops->disabled);
217 }
218
219 extern void ftrace_stub(unsigned long a0, unsigned long a1,
220                         struct ftrace_ops *op, struct pt_regs *regs);
221
222 #else /* !CONFIG_FUNCTION_TRACER */
223 /*
224  * (un)register_ftrace_function must be a macro since the ops parameter
225  * must not be evaluated.
226  */
227 #define register_ftrace_function(ops) ({ 0; })
228 #define unregister_ftrace_function(ops) ({ 0; })
229 static inline int ftrace_nr_registered_ops(void)
230 {
231         return 0;
232 }
233 static inline void clear_ftrace_function(void) { }
234 static inline void ftrace_kill(void) { }
235 static inline void ftrace_stop(void) { }
236 static inline void ftrace_start(void) { }
237 #endif /* CONFIG_FUNCTION_TRACER */
238
239 #ifdef CONFIG_STACK_TRACER
240 extern int stack_tracer_enabled;
241 int
242 stack_trace_sysctl(struct ctl_table *table, int write,
243                    void __user *buffer, size_t *lenp,
244                    loff_t *ppos);
245 #endif
246
247 struct ftrace_func_command {
248         struct list_head        list;
249         char                    *name;
250         int                     (*func)(struct ftrace_hash *hash,
251                                         char *func, char *cmd,
252                                         char *params, int enable);
253 };
254
255 #ifdef CONFIG_DYNAMIC_FTRACE
256
257 int ftrace_arch_code_modify_prepare(void);
258 int ftrace_arch_code_modify_post_process(void);
259
260 void ftrace_bug(int err, unsigned long ip);
261
262 struct seq_file;
263
264 struct ftrace_probe_ops {
265         void                    (*func)(unsigned long ip,
266                                         unsigned long parent_ip,
267                                         void **data);
268         int                     (*init)(struct ftrace_probe_ops *ops,
269                                         unsigned long ip, void **data);
270         void                    (*free)(struct ftrace_probe_ops *ops,
271                                         unsigned long ip, void **data);
272         int                     (*print)(struct seq_file *m,
273                                          unsigned long ip,
274                                          struct ftrace_probe_ops *ops,
275                                          void *data);
276 };
277
278 extern int
279 register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
280                               void *data);
281 extern void
282 unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
283                                 void *data);
284 extern void
285 unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
286 extern void unregister_ftrace_function_probe_all(char *glob);
287
288 extern int ftrace_text_reserved(void *start, void *end);
289
290 extern int ftrace_nr_registered_ops(void);
291
292 /*
293  * The dyn_ftrace record's flags field is split into two parts.
294  * the first part which is '0-FTRACE_REF_MAX' is a counter of
295  * the number of callbacks that have registered the function that
296  * the dyn_ftrace descriptor represents.
297  *
298  * The second part is a mask:
299  *  ENABLED - the function is being traced
300  *  REGS    - the record wants the function to save regs
301  *  REGS_EN - the function is set up to save regs.
302  *
303  * When a new ftrace_ops is registered and wants a function to save
304  * pt_regs, the rec->flag REGS is set. When the function has been
305  * set up to save regs, the REG_EN flag is set. Once a function
306  * starts saving regs it will do so until all ftrace_ops are removed
307  * from tracing that function.
308  */
309 enum {
310         FTRACE_FL_ENABLED       = (1UL << 29),
311         FTRACE_FL_REGS          = (1UL << 30),
312         FTRACE_FL_REGS_EN       = (1UL << 31)
313 };
314
315 #define FTRACE_FL_MASK          (0x7UL << 29)
316 #define FTRACE_REF_MAX          ((1UL << 29) - 1)
317
318 struct dyn_ftrace {
319         union {
320                 unsigned long           ip; /* address of mcount call-site */
321                 struct dyn_ftrace       *freelist;
322         };
323         unsigned long           flags;
324         struct dyn_arch_ftrace          arch;
325 };
326
327 int ftrace_force_update(void);
328 int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
329                          int remove, int reset);
330 int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
331                        int len, int reset);
332 int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
333                         int len, int reset);
334 void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
335 void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
336 void ftrace_free_filter(struct ftrace_ops *ops);
337
338 int register_ftrace_command(struct ftrace_func_command *cmd);
339 int unregister_ftrace_command(struct ftrace_func_command *cmd);
340
341 enum {
342         FTRACE_UPDATE_CALLS             = (1 << 0),
343         FTRACE_DISABLE_CALLS            = (1 << 1),
344         FTRACE_UPDATE_TRACE_FUNC        = (1 << 2),
345         FTRACE_START_FUNC_RET           = (1 << 3),
346         FTRACE_STOP_FUNC_RET            = (1 << 4),
347 };
348
349 /*
350  * The FTRACE_UPDATE_* enum is used to pass information back
351  * from the ftrace_update_record() and ftrace_test_record()
352  * functions. These are called by the code update routines
353  * to find out what is to be done for a given function.
354  *
355  *  IGNORE           - The function is already what we want it to be
356  *  MAKE_CALL        - Start tracing the function
357  *  MODIFY_CALL      - Stop saving regs for the function
358  *  MODIFY_CALL_REGS - Start saving regs for the function
359  *  MAKE_NOP         - Stop tracing the function
360  */
361 enum {
362         FTRACE_UPDATE_IGNORE,
363         FTRACE_UPDATE_MAKE_CALL,
364         FTRACE_UPDATE_MODIFY_CALL,
365         FTRACE_UPDATE_MODIFY_CALL_REGS,
366         FTRACE_UPDATE_MAKE_NOP,
367 };
368
369 enum {
370         FTRACE_ITER_FILTER      = (1 << 0),
371         FTRACE_ITER_NOTRACE     = (1 << 1),
372         FTRACE_ITER_PRINTALL    = (1 << 2),
373         FTRACE_ITER_DO_HASH     = (1 << 3),
374         FTRACE_ITER_HASH        = (1 << 4),
375         FTRACE_ITER_ENABLED     = (1 << 5),
376 };
377
378 void arch_ftrace_update_code(int command);
379
380 struct ftrace_rec_iter;
381
382 struct ftrace_rec_iter *ftrace_rec_iter_start(void);
383 struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
384 struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
385
386 #define for_ftrace_rec_iter(iter)               \
387         for (iter = ftrace_rec_iter_start();    \
388              iter;                              \
389              iter = ftrace_rec_iter_next(iter))
390
391
392 int ftrace_update_record(struct dyn_ftrace *rec, int enable);
393 int ftrace_test_record(struct dyn_ftrace *rec, int enable);
394 void ftrace_run_stop_machine(int command);
395 unsigned long ftrace_location(unsigned long ip);
396
397 extern ftrace_func_t ftrace_trace_function;
398
399 int ftrace_regex_open(struct ftrace_ops *ops, int flag,
400                   struct inode *inode, struct file *file);
401 ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
402                             size_t cnt, loff_t *ppos);
403 ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
404                              size_t cnt, loff_t *ppos);
405 int ftrace_regex_release(struct inode *inode, struct file *file);
406
407 void __init
408 ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
409
410 /* defined in arch */
411 extern int ftrace_ip_converted(unsigned long ip);
412 extern int ftrace_dyn_arch_init(void *data);
413 extern void ftrace_replace_code(int enable);
414 extern int ftrace_update_ftrace_func(ftrace_func_t func);
415 extern void ftrace_caller(void);
416 extern void ftrace_regs_caller(void);
417 extern void ftrace_call(void);
418 extern void ftrace_regs_call(void);
419 extern void mcount_call(void);
420
421 void ftrace_modify_all_code(int command);
422
423 #ifndef FTRACE_ADDR
424 #define FTRACE_ADDR ((unsigned long)ftrace_caller)
425 #endif
426
427 #ifndef FTRACE_REGS_ADDR
428 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
429 # define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
430 #else
431 # define FTRACE_REGS_ADDR FTRACE_ADDR
432 #endif
433 #endif
434
435 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
436 extern void ftrace_graph_caller(void);
437 extern int ftrace_enable_ftrace_graph_caller(void);
438 extern int ftrace_disable_ftrace_graph_caller(void);
439 #else
440 static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
441 static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
442 #endif
443
444 /**
445  * ftrace_make_nop - convert code into nop
446  * @mod: module structure if called by module load initialization
447  * @rec: the mcount call site record
448  * @addr: the address that the call site should be calling
449  *
450  * This is a very sensitive operation and great care needs
451  * to be taken by the arch.  The operation should carefully
452  * read the location, check to see if what is read is indeed
453  * what we expect it to be, and then on success of the compare,
454  * it should write to the location.
455  *
456  * The code segment at @rec->ip should be a caller to @addr
457  *
458  * Return must be:
459  *  0 on success
460  *  -EFAULT on error reading the location
461  *  -EINVAL on a failed compare of the contents
462  *  -EPERM  on error writing to the location
463  * Any other value will be considered a failure.
464  */
465 extern int ftrace_make_nop(struct module *mod,
466                            struct dyn_ftrace *rec, unsigned long addr);
467
468 /**
469  * ftrace_make_call - convert a nop call site into a call to addr
470  * @rec: the mcount call site record
471  * @addr: the address that the call site should call
472  *
473  * This is a very sensitive operation and great care needs
474  * to be taken by the arch.  The operation should carefully
475  * read the location, check to see if what is read is indeed
476  * what we expect it to be, and then on success of the compare,
477  * it should write to the location.
478  *
479  * The code segment at @rec->ip should be a nop
480  *
481  * Return must be:
482  *  0 on success
483  *  -EFAULT on error reading the location
484  *  -EINVAL on a failed compare of the contents
485  *  -EPERM  on error writing to the location
486  * Any other value will be considered a failure.
487  */
488 extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
489
490 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
491 /**
492  * ftrace_modify_call - convert from one addr to another (no nop)
493  * @rec: the mcount call site record
494  * @old_addr: the address expected to be currently called to
495  * @addr: the address to change to
496  *
497  * This is a very sensitive operation and great care needs
498  * to be taken by the arch.  The operation should carefully
499  * read the location, check to see if what is read is indeed
500  * what we expect it to be, and then on success of the compare,
501  * it should write to the location.
502  *
503  * The code segment at @rec->ip should be a caller to @old_addr
504  *
505  * Return must be:
506  *  0 on success
507  *  -EFAULT on error reading the location
508  *  -EINVAL on a failed compare of the contents
509  *  -EPERM  on error writing to the location
510  * Any other value will be considered a failure.
511  */
512 extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
513                               unsigned long addr);
514 #else
515 /* Should never be called */
516 static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
517                                      unsigned long addr)
518 {
519         return -EINVAL;
520 }
521 #endif
522
523 /* May be defined in arch */
524 extern int ftrace_arch_read_dyn_info(char *buf, int size);
525
526 extern int skip_trace(unsigned long ip);
527 extern void ftrace_module_init(struct module *mod);
528
529 extern void ftrace_disable_daemon(void);
530 extern void ftrace_enable_daemon(void);
531 #else /* CONFIG_DYNAMIC_FTRACE */
532 static inline int skip_trace(unsigned long ip) { return 0; }
533 static inline int ftrace_force_update(void) { return 0; }
534 static inline void ftrace_disable_daemon(void) { }
535 static inline void ftrace_enable_daemon(void) { }
536 static inline void ftrace_release_mod(struct module *mod) {}
537 static inline void ftrace_module_init(struct module *mod) {}
538 static inline int register_ftrace_command(struct ftrace_func_command *cmd)
539 {
540         return -EINVAL;
541 }
542 static inline int unregister_ftrace_command(char *cmd_name)
543 {
544         return -EINVAL;
545 }
546 static inline int ftrace_text_reserved(void *start, void *end)
547 {
548         return 0;
549 }
550 static inline unsigned long ftrace_location(unsigned long ip)
551 {
552         return 0;
553 }
554
555 /*
556  * Again users of functions that have ftrace_ops may not
557  * have them defined when ftrace is not enabled, but these
558  * functions may still be called. Use a macro instead of inline.
559  */
560 #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
561 #define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
562 #define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
563 #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
564 #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
565 #define ftrace_free_filter(ops) do { } while (0)
566
567 static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
568                             size_t cnt, loff_t *ppos) { return -ENODEV; }
569 static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
570                              size_t cnt, loff_t *ppos) { return -ENODEV; }
571 static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int whence)
572 {
573         return -ENODEV;
574 }
575 static inline int
576 ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
577 #endif /* CONFIG_DYNAMIC_FTRACE */
578
579 loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int whence);
580
581 /* totally disable ftrace - can not re-enable after this */
582 void ftrace_kill(void);
583
584 static inline void tracer_disable(void)
585 {
586 #ifdef CONFIG_FUNCTION_TRACER
587         ftrace_enabled = 0;
588 #endif
589 }
590
591 /*
592  * Ftrace disable/restore without lock. Some synchronization mechanism
593  * must be used to prevent ftrace_enabled to be changed between
594  * disable/restore.
595  */
596 static inline int __ftrace_enabled_save(void)
597 {
598 #ifdef CONFIG_FUNCTION_TRACER
599         int saved_ftrace_enabled = ftrace_enabled;
600         ftrace_enabled = 0;
601         return saved_ftrace_enabled;
602 #else
603         return 0;
604 #endif
605 }
606
607 static inline void __ftrace_enabled_restore(int enabled)
608 {
609 #ifdef CONFIG_FUNCTION_TRACER
610         ftrace_enabled = enabled;
611 #endif
612 }
613
614 /* All archs should have this, but we define it for consistency */
615 #ifndef ftrace_return_address0
616 # define ftrace_return_address0 __builtin_return_address(0)
617 #endif
618
619 /* Archs may use other ways for ADDR1 and beyond */
620 #ifndef ftrace_return_address
621 # ifdef CONFIG_FRAME_POINTER
622 #  define ftrace_return_address(n) __builtin_return_address(n)
623 # else
624 #  define ftrace_return_address(n) 0UL
625 # endif
626 #endif
627
628 #define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
629 #define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
630 #define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
631 #define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
632 #define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
633 #define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
634 #define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
635
636 #ifdef CONFIG_IRQSOFF_TRACER
637   extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
638   extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
639 #else
640   static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
641   static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
642 #endif
643
644 #ifdef CONFIG_PREEMPT_TRACER
645   extern void trace_preempt_on(unsigned long a0, unsigned long a1);
646   extern void trace_preempt_off(unsigned long a0, unsigned long a1);
647 #else
648 /*
649  * Use defines instead of static inlines because some arches will make code out
650  * of the CALLER_ADDR, when we really want these to be a real nop.
651  */
652 # define trace_preempt_on(a0, a1) do { } while (0)
653 # define trace_preempt_off(a0, a1) do { } while (0)
654 #endif
655
656 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
657 extern void ftrace_init(void);
658 #else
659 static inline void ftrace_init(void) { }
660 #endif
661
662 /*
663  * Structure that defines an entry function trace.
664  */
665 struct ftrace_graph_ent {
666         unsigned long func; /* Current function */
667         int depth;
668 };
669
670 /*
671  * Structure that defines a return function trace.
672  */
673 struct ftrace_graph_ret {
674         unsigned long func; /* Current function */
675         unsigned long long calltime;
676         unsigned long long rettime;
677         /* Number of functions that overran the depth limit for current task */
678         unsigned long overrun;
679         int depth;
680 };
681
682 /* Type of the callback handlers for tracing function graph*/
683 typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
684 typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
685
686 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
687
688 /* for init task */
689 #define INIT_FTRACE_GRAPH               .ret_stack = NULL,
690
691 /*
692  * Stack of return addresses for functions
693  * of a thread.
694  * Used in struct thread_info
695  */
696 struct ftrace_ret_stack {
697         unsigned long ret;
698         unsigned long func;
699         unsigned long long calltime;
700         unsigned long long subtime;
701         unsigned long fp;
702 };
703
704 /*
705  * Primary handler of a function return.
706  * It relays on ftrace_return_to_handler.
707  * Defined in entry_32/64.S
708  */
709 extern void return_to_handler(void);
710
711 extern int
712 ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
713                          unsigned long frame_pointer);
714
715 /*
716  * Sometimes we don't want to trace a function with the function
717  * graph tracer but we want them to keep traced by the usual function
718  * tracer if the function graph tracer is not configured.
719  */
720 #define __notrace_funcgraph             notrace
721
722 /*
723  * We want to which function is an entrypoint of a hardirq.
724  * That will help us to put a signal on output.
725  */
726 #define __irq_entry              __attribute__((__section__(".irqentry.text")))
727
728 /* Limits of hardirq entrypoints */
729 extern char __irqentry_text_start[];
730 extern char __irqentry_text_end[];
731
732 #define FTRACE_RETFUNC_DEPTH 50
733 #define FTRACE_RETSTACK_ALLOC_SIZE 32
734 extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
735                                 trace_func_graph_ent_t entryfunc);
736
737 extern void ftrace_graph_stop(void);
738
739 /* The current handlers in use */
740 extern trace_func_graph_ret_t ftrace_graph_return;
741 extern trace_func_graph_ent_t ftrace_graph_entry;
742
743 extern void unregister_ftrace_graph(void);
744
745 extern void ftrace_graph_init_task(struct task_struct *t);
746 extern void ftrace_graph_exit_task(struct task_struct *t);
747 extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
748
749 static inline int task_curr_ret_stack(struct task_struct *t)
750 {
751         return t->curr_ret_stack;
752 }
753
754 static inline void pause_graph_tracing(void)
755 {
756         atomic_inc(&current->tracing_graph_pause);
757 }
758
759 static inline void unpause_graph_tracing(void)
760 {
761         atomic_dec(&current->tracing_graph_pause);
762 }
763 #else /* !CONFIG_FUNCTION_GRAPH_TRACER */
764
765 #define __notrace_funcgraph
766 #define __irq_entry
767 #define INIT_FTRACE_GRAPH
768
769 static inline void ftrace_graph_init_task(struct task_struct *t) { }
770 static inline void ftrace_graph_exit_task(struct task_struct *t) { }
771 static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
772
773 static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
774                           trace_func_graph_ent_t entryfunc)
775 {
776         return -1;
777 }
778 static inline void unregister_ftrace_graph(void) { }
779
780 static inline int task_curr_ret_stack(struct task_struct *tsk)
781 {
782         return -1;
783 }
784
785 static inline void pause_graph_tracing(void) { }
786 static inline void unpause_graph_tracing(void) { }
787 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
788
789 #ifdef CONFIG_TRACING
790
791 /* flags for current->trace */
792 enum {
793         TSK_TRACE_FL_TRACE_BIT  = 0,
794         TSK_TRACE_FL_GRAPH_BIT  = 1,
795 };
796 enum {
797         TSK_TRACE_FL_TRACE      = 1 << TSK_TRACE_FL_TRACE_BIT,
798         TSK_TRACE_FL_GRAPH      = 1 << TSK_TRACE_FL_GRAPH_BIT,
799 };
800
801 static inline void set_tsk_trace_trace(struct task_struct *tsk)
802 {
803         set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
804 }
805
806 static inline void clear_tsk_trace_trace(struct task_struct *tsk)
807 {
808         clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
809 }
810
811 static inline int test_tsk_trace_trace(struct task_struct *tsk)
812 {
813         return tsk->trace & TSK_TRACE_FL_TRACE;
814 }
815
816 static inline void set_tsk_trace_graph(struct task_struct *tsk)
817 {
818         set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
819 }
820
821 static inline void clear_tsk_trace_graph(struct task_struct *tsk)
822 {
823         clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
824 }
825
826 static inline int test_tsk_trace_graph(struct task_struct *tsk)
827 {
828         return tsk->trace & TSK_TRACE_FL_GRAPH;
829 }
830
831 enum ftrace_dump_mode;
832
833 extern enum ftrace_dump_mode ftrace_dump_on_oops;
834
835 #ifdef CONFIG_PREEMPT
836 #define INIT_TRACE_RECURSION            .trace_recursion = 0,
837 #endif
838
839 #endif /* CONFIG_TRACING */
840
841 #ifndef INIT_TRACE_RECURSION
842 #define INIT_TRACE_RECURSION
843 #endif
844
845 #ifdef CONFIG_FTRACE_SYSCALLS
846
847 unsigned long arch_syscall_addr(int nr);
848
849 #endif /* CONFIG_FTRACE_SYSCALLS */
850
851 #endif /* _LINUX_FTRACE_H */