UPSTREAM: PCI: rockchip: Add Kconfig COMPILE_TEST
[firefly-linux-kernel-4.4.55.git] / drivers / pci / ats.c
1 /*
2  * drivers/pci/ats.c
3  *
4  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
5  * Copyright (C) 2011 Advanced Micro Devices,
6  *
7  * PCI Express I/O Virtualization (IOV) support.
8  *   Address Translation Service 1.0
9  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
10  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
11  */
12
13 #include <linux/export.h>
14 #include <linux/pci-ats.h>
15 #include <linux/pci.h>
16 #include <linux/slab.h>
17
18 #include "pci.h"
19
20 void pci_ats_init(struct pci_dev *dev)
21 {
22         int pos;
23
24         pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
25         if (!pos)
26                 return;
27
28         dev->ats_cap = pos;
29 }
30
31 /**
32  * pci_enable_ats - enable the ATS capability
33  * @dev: the PCI device
34  * @ps: the IOMMU page shift
35  *
36  * Returns 0 on success, or negative on failure.
37  */
38 int pci_enable_ats(struct pci_dev *dev, int ps)
39 {
40         u16 ctrl;
41         struct pci_dev *pdev;
42
43         if (!dev->ats_cap)
44                 return -EINVAL;
45
46         if (WARN_ON(dev->ats_enabled))
47                 return -EBUSY;
48
49         if (ps < PCI_ATS_MIN_STU)
50                 return -EINVAL;
51
52         /*
53          * Note that enabling ATS on a VF fails unless it's already enabled
54          * with the same STU on the PF.
55          */
56         ctrl = PCI_ATS_CTRL_ENABLE;
57         if (dev->is_virtfn) {
58                 pdev = pci_physfn(dev);
59                 if (pdev->ats_stu != ps)
60                         return -EINVAL;
61
62                 atomic_inc(&pdev->ats_ref_cnt);  /* count enabled VFs */
63         } else {
64                 dev->ats_stu = ps;
65                 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
66         }
67         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
68
69         dev->ats_enabled = 1;
70         return 0;
71 }
72 EXPORT_SYMBOL_GPL(pci_enable_ats);
73
74 /**
75  * pci_disable_ats - disable the ATS capability
76  * @dev: the PCI device
77  */
78 void pci_disable_ats(struct pci_dev *dev)
79 {
80         struct pci_dev *pdev;
81         u16 ctrl;
82
83         if (WARN_ON(!dev->ats_enabled))
84                 return;
85
86         if (atomic_read(&dev->ats_ref_cnt))
87                 return;         /* VFs still enabled */
88
89         if (dev->is_virtfn) {
90                 pdev = pci_physfn(dev);
91                 atomic_dec(&pdev->ats_ref_cnt);
92         }
93
94         pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
95         ctrl &= ~PCI_ATS_CTRL_ENABLE;
96         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
97
98         dev->ats_enabled = 0;
99 }
100 EXPORT_SYMBOL_GPL(pci_disable_ats);
101
102 void pci_restore_ats_state(struct pci_dev *dev)
103 {
104         u16 ctrl;
105
106         if (!dev->ats_enabled)
107                 return;
108
109         ctrl = PCI_ATS_CTRL_ENABLE;
110         if (!dev->is_virtfn)
111                 ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
112         pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
113 }
114 EXPORT_SYMBOL_GPL(pci_restore_ats_state);
115
116 /**
117  * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
118  * @dev: the PCI device
119  *
120  * Returns the queue depth on success, or negative on failure.
121  *
122  * The ATS spec uses 0 in the Invalidate Queue Depth field to
123  * indicate that the function can accept 32 Invalidate Request.
124  * But here we use the `real' values (i.e. 1~32) for the Queue
125  * Depth; and 0 indicates the function shares the Queue with
126  * other functions (doesn't exclusively own a Queue).
127  */
128 int pci_ats_queue_depth(struct pci_dev *dev)
129 {
130         u16 cap;
131
132         if (!dev->ats_cap)
133                 return -EINVAL;
134
135         if (dev->is_virtfn)
136                 return 0;
137
138         pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
139         return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
140 }
141 EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
142
143 #ifdef CONFIG_PCI_PRI
144 /**
145  * pci_enable_pri - Enable PRI capability
146  * @ pdev: PCI device structure
147  *
148  * Returns 0 on success, negative value on error
149  */
150 int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
151 {
152         u16 control, status;
153         u32 max_requests;
154         int pos;
155
156         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
157         if (!pos)
158                 return -EINVAL;
159
160         pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
161         pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
162         if ((control & PCI_PRI_CTRL_ENABLE) ||
163             !(status & PCI_PRI_STATUS_STOPPED))
164                 return -EBUSY;
165
166         pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
167         reqs = min(max_requests, reqs);
168         pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
169
170         control |= PCI_PRI_CTRL_ENABLE;
171         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
172
173         return 0;
174 }
175 EXPORT_SYMBOL_GPL(pci_enable_pri);
176
177 /**
178  * pci_disable_pri - Disable PRI capability
179  * @pdev: PCI device structure
180  *
181  * Only clears the enabled-bit, regardless of its former value
182  */
183 void pci_disable_pri(struct pci_dev *pdev)
184 {
185         u16 control;
186         int pos;
187
188         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
189         if (!pos)
190                 return;
191
192         pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
193         control &= ~PCI_PRI_CTRL_ENABLE;
194         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
195 }
196 EXPORT_SYMBOL_GPL(pci_disable_pri);
197
198 /**
199  * pci_reset_pri - Resets device's PRI state
200  * @pdev: PCI device structure
201  *
202  * The PRI capability must be disabled before this function is called.
203  * Returns 0 on success, negative value on error.
204  */
205 int pci_reset_pri(struct pci_dev *pdev)
206 {
207         u16 control;
208         int pos;
209
210         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
211         if (!pos)
212                 return -EINVAL;
213
214         pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
215         if (control & PCI_PRI_CTRL_ENABLE)
216                 return -EBUSY;
217
218         control |= PCI_PRI_CTRL_RESET;
219
220         pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
221
222         return 0;
223 }
224 EXPORT_SYMBOL_GPL(pci_reset_pri);
225 #endif /* CONFIG_PCI_PRI */
226
227 #ifdef CONFIG_PCI_PASID
228 /**
229  * pci_enable_pasid - Enable the PASID capability
230  * @pdev: PCI device structure
231  * @features: Features to enable
232  *
233  * Returns 0 on success, negative value on error. This function checks
234  * whether the features are actually supported by the device and returns
235  * an error if not.
236  */
237 int pci_enable_pasid(struct pci_dev *pdev, int features)
238 {
239         u16 control, supported;
240         int pos;
241
242         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
243         if (!pos)
244                 return -EINVAL;
245
246         pci_read_config_word(pdev, pos + PCI_PASID_CTRL, &control);
247         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
248
249         if (control & PCI_PASID_CTRL_ENABLE)
250                 return -EINVAL;
251
252         supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
253
254         /* User wants to enable anything unsupported? */
255         if ((supported & features) != features)
256                 return -EINVAL;
257
258         control = PCI_PASID_CTRL_ENABLE | features;
259
260         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
261
262         return 0;
263 }
264 EXPORT_SYMBOL_GPL(pci_enable_pasid);
265
266 /**
267  * pci_disable_pasid - Disable the PASID capability
268  * @pdev: PCI device structure
269  *
270  */
271 void pci_disable_pasid(struct pci_dev *pdev)
272 {
273         u16 control = 0;
274         int pos;
275
276         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
277         if (!pos)
278                 return;
279
280         pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
281 }
282 EXPORT_SYMBOL_GPL(pci_disable_pasid);
283
284 /**
285  * pci_pasid_features - Check which PASID features are supported
286  * @pdev: PCI device structure
287  *
288  * Returns a negative value when no PASI capability is present.
289  * Otherwise is returns a bitmask with supported features. Current
290  * features reported are:
291  * PCI_PASID_CAP_EXEC - Execute permission supported
292  * PCI_PASID_CAP_PRIV - Privileged mode supported
293  */
294 int pci_pasid_features(struct pci_dev *pdev)
295 {
296         u16 supported;
297         int pos;
298
299         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
300         if (!pos)
301                 return -EINVAL;
302
303         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
304
305         supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
306
307         return supported;
308 }
309 EXPORT_SYMBOL_GPL(pci_pasid_features);
310
311 #define PASID_NUMBER_SHIFT      8
312 #define PASID_NUMBER_MASK       (0x1f << PASID_NUMBER_SHIFT)
313 /**
314  * pci_max_pasid - Get maximum number of PASIDs supported by device
315  * @pdev: PCI device structure
316  *
317  * Returns negative value when PASID capability is not present.
318  * Otherwise it returns the numer of supported PASIDs.
319  */
320 int pci_max_pasids(struct pci_dev *pdev)
321 {
322         u16 supported;
323         int pos;
324
325         pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
326         if (!pos)
327                 return -EINVAL;
328
329         pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
330
331         supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
332
333         return (1 << supported);
334 }
335 EXPORT_SYMBOL_GPL(pci_max_pasids);
336 #endif /* CONFIG_PCI_PASID */