mfd: fusb302: change to host when connect type-c to standard-a cable
[firefly-linux-kernel-4.4.55.git] / drivers / mfd / tps80031.c
1 /*
2  * tps80031.c -- TI TPS80031/TPS80032 mfd core driver.
3  *
4  * MFD core driver for TI TPS80031/TPS80032 Fully Integrated
5  * Power Management with Power Path and Battery Charger
6  *
7  * Copyright (c) 2012, NVIDIA Corporation.
8  *
9  * Author: Laxman Dewangan <ldewangan@nvidia.com>
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation version 2.
14  *
15  * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
16  * whether express or implied; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
23  * 02111-1307, USA
24  */
25
26 #include <linux/err.h>
27 #include <linux/i2c.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/irq.h>
31 #include <linux/mfd/core.h>
32 #include <linux/mfd/tps80031.h>
33 #include <linux/module.h>
34 #include <linux/pm.h>
35 #include <linux/regmap.h>
36 #include <linux/slab.h>
37
38 static struct resource tps80031_rtc_resources[] = {
39         {
40                 .start = TPS80031_INT_RTC_ALARM,
41                 .end = TPS80031_INT_RTC_ALARM,
42                 .flags = IORESOURCE_IRQ,
43         },
44 };
45
46 /* TPS80031 sub mfd devices */
47 static const struct mfd_cell tps80031_cell[] = {
48         {
49                 .name = "tps80031-pmic",
50         },
51         {
52                 .name = "tps80031-clock",
53         },
54         {
55                 .name = "tps80031-rtc",
56                 .num_resources = ARRAY_SIZE(tps80031_rtc_resources),
57                 .resources = tps80031_rtc_resources,
58         },
59         {
60                 .name = "tps80031-gpadc",
61         },
62         {
63                 .name = "tps80031-fuel-gauge",
64         },
65         {
66                 .name = "tps80031-charger",
67         },
68 };
69
70 static int tps80031_slave_address[TPS80031_NUM_SLAVES] = {
71         TPS80031_I2C_ID0_ADDR,
72         TPS80031_I2C_ID1_ADDR,
73         TPS80031_I2C_ID2_ADDR,
74         TPS80031_I2C_ID3_ADDR,
75 };
76
77 struct tps80031_pupd_data {
78         u8      reg;
79         u8      pullup_bit;
80         u8      pulldown_bit;
81 };
82
83 #define TPS80031_IRQ(_reg, _mask)                       \
84         {                                                       \
85                 .reg_offset = (TPS80031_INT_MSK_LINE_##_reg) -  \
86                                 TPS80031_INT_MSK_LINE_A,        \
87                 .mask = BIT(_mask),                             \
88         }
89
90 static const struct regmap_irq tps80031_main_irqs[] = {
91         [TPS80031_INT_PWRON]            = TPS80031_IRQ(A, 0),
92         [TPS80031_INT_RPWRON]           = TPS80031_IRQ(A, 1),
93         [TPS80031_INT_SYS_VLOW]         = TPS80031_IRQ(A, 2),
94         [TPS80031_INT_RTC_ALARM]        = TPS80031_IRQ(A, 3),
95         [TPS80031_INT_RTC_PERIOD]       = TPS80031_IRQ(A, 4),
96         [TPS80031_INT_HOT_DIE]          = TPS80031_IRQ(A, 5),
97         [TPS80031_INT_VXX_SHORT]        = TPS80031_IRQ(A, 6),
98         [TPS80031_INT_SPDURATION]       = TPS80031_IRQ(A, 7),
99         [TPS80031_INT_WATCHDOG]         = TPS80031_IRQ(B, 0),
100         [TPS80031_INT_BAT]              = TPS80031_IRQ(B, 1),
101         [TPS80031_INT_SIM]              = TPS80031_IRQ(B, 2),
102         [TPS80031_INT_MMC]              = TPS80031_IRQ(B, 3),
103         [TPS80031_INT_RES]              = TPS80031_IRQ(B, 4),
104         [TPS80031_INT_GPADC_RT]         = TPS80031_IRQ(B, 5),
105         [TPS80031_INT_GPADC_SW2_EOC]    = TPS80031_IRQ(B, 6),
106         [TPS80031_INT_CC_AUTOCAL]       = TPS80031_IRQ(B, 7),
107         [TPS80031_INT_ID_WKUP]          = TPS80031_IRQ(C, 0),
108         [TPS80031_INT_VBUSS_WKUP]       = TPS80031_IRQ(C, 1),
109         [TPS80031_INT_ID]               = TPS80031_IRQ(C, 2),
110         [TPS80031_INT_VBUS]             = TPS80031_IRQ(C, 3),
111         [TPS80031_INT_CHRG_CTRL]        = TPS80031_IRQ(C, 4),
112         [TPS80031_INT_EXT_CHRG]         = TPS80031_IRQ(C, 5),
113         [TPS80031_INT_INT_CHRG]         = TPS80031_IRQ(C, 6),
114         [TPS80031_INT_RES2]             = TPS80031_IRQ(C, 7),
115 };
116
117 static struct regmap_irq_chip tps80031_irq_chip = {
118         .name = "tps80031",
119         .irqs = tps80031_main_irqs,
120         .num_irqs = ARRAY_SIZE(tps80031_main_irqs),
121         .num_regs = 3,
122         .status_base = TPS80031_INT_STS_A,
123         .mask_base = TPS80031_INT_MSK_LINE_A,
124 };
125
126 #define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit)     \
127         {                                               \
128                 .reg = TPS80031_CFG_INPUT_PUPD##_reg,   \
129                 .pulldown_bit = _pulldown_bit,          \
130                 .pullup_bit = _pullup_bit,              \
131         }
132
133 static const struct tps80031_pupd_data tps80031_pupds[] = {
134         [TPS80031_PREQ1]                = PUPD_DATA(1, BIT(0),  BIT(1)),
135         [TPS80031_PREQ2A]               = PUPD_DATA(1, BIT(2),  BIT(3)),
136         [TPS80031_PREQ2B]               = PUPD_DATA(1, BIT(4),  BIT(5)),
137         [TPS80031_PREQ2C]               = PUPD_DATA(1, BIT(6),  BIT(7)),
138         [TPS80031_PREQ3]                = PUPD_DATA(2, BIT(0),  BIT(1)),
139         [TPS80031_NRES_WARM]            = PUPD_DATA(2, 0,       BIT(2)),
140         [TPS80031_PWM_FORCE]            = PUPD_DATA(2, BIT(5),  0),
141         [TPS80031_CHRG_EXT_CHRG_STATZ]  = PUPD_DATA(2, 0,       BIT(6)),
142         [TPS80031_SIM]                  = PUPD_DATA(3, BIT(0),  BIT(1)),
143         [TPS80031_MMC]                  = PUPD_DATA(3, BIT(2),  BIT(3)),
144         [TPS80031_GPADC_START]          = PUPD_DATA(3, BIT(4),  0),
145         [TPS80031_DVSI2C_SCL]           = PUPD_DATA(4, 0,       BIT(0)),
146         [TPS80031_DVSI2C_SDA]           = PUPD_DATA(4, 0,       BIT(1)),
147         [TPS80031_CTLI2C_SCL]           = PUPD_DATA(4, 0,       BIT(2)),
148         [TPS80031_CTLI2C_SDA]           = PUPD_DATA(4, 0,       BIT(3)),
149 };
150 static struct tps80031 *tps80031_power_off_dev;
151
152 int tps80031_ext_power_req_config(struct device *dev,
153                 unsigned long ext_ctrl_flag, int preq_bit,
154                 int state_reg_add, int trans_reg_add)
155 {
156         u8 res_ass_reg = 0;
157         int preq_mask_bit = 0;
158         int ret;
159
160         if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ))
161                 return 0;
162
163         if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) {
164                 res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3);
165                 preq_mask_bit = 5;
166         } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) {
167                 res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3);
168                 preq_mask_bit = 6;
169         } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) {
170                 res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3);
171                 preq_mask_bit = 7;
172         }
173
174         /* Configure REQ_ASS registers */
175         ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg,
176                                         BIT(preq_bit & 0x7));
177         if (ret < 0) {
178                 dev_err(dev, "reg 0x%02x setbit failed, err = %d\n",
179                                 res_ass_reg, ret);
180                 return ret;
181         }
182
183         /* Unmask the PREQ */
184         ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1,
185                         TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit));
186         if (ret < 0) {
187                 dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n",
188                         TPS80031_PHOENIX_MSK_TRANSITION, ret);
189                 return ret;
190         }
191
192         /* Switch regulator control to resource now */
193         if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 |
194                                         TPS80031_PWR_REQ_INPUT_PREQ3)) {
195                 ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add,
196                                                 0x0, TPS80031_STATE_MASK);
197                 if (ret < 0)
198                         dev_err(dev, "reg 0x%02x update failed, err = %d\n",
199                                 state_reg_add, ret);
200         } else {
201                 ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add,
202                                 TPS80031_TRANS_SLEEP_OFF,
203                                 TPS80031_TRANS_SLEEP_MASK);
204                 if (ret < 0)
205                         dev_err(dev, "reg 0x%02x update failed, err = %d\n",
206                                 trans_reg_add, ret);
207         }
208         return ret;
209 }
210 EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config);
211
212 static void tps80031_power_off(void)
213 {
214         dev_info(tps80031_power_off_dev->dev, "switching off PMU\n");
215         tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1,
216                                 TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
217 }
218
219 static void tps80031_pupd_init(struct tps80031 *tps80031,
220                                struct tps80031_platform_data *pdata)
221 {
222         struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data;
223         int data_size = pdata->pupd_init_data_size;
224         int i;
225
226         for (i = 0; i < data_size; ++i) {
227                 struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i];
228                 const struct tps80031_pupd_data *pupd =
229                         &tps80031_pupds[pupd_init->input_pin];
230                 u8 update_value = 0;
231                 u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit;
232
233                 if (pupd_init->setting == TPS80031_PUPD_PULLDOWN)
234                         update_value = pupd->pulldown_bit;
235                 else if (pupd_init->setting == TPS80031_PUPD_PULLUP)
236                         update_value = pupd->pullup_bit;
237
238                 tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg,
239                                 update_value, update_mask);
240         }
241 }
242
243 static int tps80031_init_ext_control(struct tps80031 *tps80031,
244                         struct tps80031_platform_data *pdata)
245 {
246         struct device *dev = tps80031->dev;
247         int ret;
248         int i;
249
250         /* Clear all external control for this rail */
251         for (i = 0; i < 9; ++i) {
252                 ret = tps80031_write(dev, TPS80031_SLAVE_ID1,
253                                 TPS80031_PREQ1_RES_ASS_A + i, 0);
254                 if (ret < 0) {
255                         dev_err(dev, "reg 0x%02x write failed, err = %d\n",
256                                 TPS80031_PREQ1_RES_ASS_A + i, ret);
257                         return ret;
258                 }
259         }
260
261         /* Mask the PREQ */
262         ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1,
263                         TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5);
264         if (ret < 0) {
265                 dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n",
266                         TPS80031_PHOENIX_MSK_TRANSITION, ret);
267                 return ret;
268         }
269         return ret;
270 }
271
272 static int tps80031_irq_init(struct tps80031 *tps80031, int irq, int irq_base)
273 {
274         struct device *dev = tps80031->dev;
275         int i, ret;
276
277         /*
278          * The MASK register used for updating status register when
279          * interrupt occurs and LINE register used to pass the status
280          * to actual interrupt line.  As per datasheet:
281          * When INT_MSK_LINE [i] is set to 1, the associated interrupt
282          * number i is INT line masked, which means that no interrupt is
283          * generated on the INT line.
284          * When INT_MSK_LINE [i] is set to 0, the associated interrupt
285          * number i is  line enabled: An interrupt is generated on the
286          * INT line.
287          * In any case, the INT_STS [i] status bit may or may not be updated,
288          * only linked to the INT_MSK_STS [i] configuration register bit.
289          *
290          * When INT_MSK_STS [i] is set to 1, the associated interrupt number
291          * i is status masked, which means that no interrupt is stored in
292          * the INT_STS[i] status bit. Note that no interrupt number i is
293          * generated on the INT line, even if the INT_MSK_LINE [i] register
294          * bit is set to 0.
295          * When INT_MSK_STS [i] is set to 0, the associated interrupt number i
296          * is status enabled: An interrupt status is updated in the INT_STS [i]
297          * register. The interrupt may or may not be generated on the INT line,
298          * depending on the INT_MSK_LINE [i] configuration register bit.
299          */
300         for (i = 0; i < 3; i++)
301                 tps80031_write(dev, TPS80031_SLAVE_ID2,
302                                 TPS80031_INT_MSK_STS_A + i, 0x00);
303
304         ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq,
305                         IRQF_ONESHOT, irq_base,
306                         &tps80031_irq_chip, &tps80031->irq_data);
307         if (ret < 0) {
308                 dev_err(dev, "add irq failed, err = %d\n", ret);
309                 return ret;
310         }
311         return ret;
312 }
313
314 static bool rd_wr_reg_id0(struct device *dev, unsigned int reg)
315 {
316         switch (reg) {
317         case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE:
318                 return true;
319         default:
320                 return false;
321         }
322 }
323
324 static bool rd_wr_reg_id1(struct device *dev, unsigned int reg)
325 {
326         switch (reg) {
327         case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG:
328         case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7:
329         case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG:
330         case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
331         case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST:
332         case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
333         case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
334         case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
335         case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
336         case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
337         case TPS80031_BACKUP_REG:
338                 return true;
339         default:
340                 return false;
341         }
342 }
343
344 static bool is_volatile_reg_id1(struct device *dev, unsigned int reg)
345 {
346         switch (reg) {
347         case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
348         case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
349         case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
350         case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
351         case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
352         case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
353                 return true;
354         default:
355                 return false;
356         }
357 }
358
359 static bool rd_wr_reg_id2(struct device *dev, unsigned int reg)
360 {
361         switch (reg) {
362         case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION:
363         case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1:
364         case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB:
365         case TPS80031_TOGGLE1 ... TPS80031_VIBMODE:
366         case TPS80031_PWM1ON ... TPS80031_PWM2OFF:
367         case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11:
368         case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C:
369         case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2:
370                 return true;
371         default:
372                 return false;
373         }
374 }
375
376 static bool rd_wr_reg_id3(struct device *dev, unsigned int reg)
377 {
378         switch (reg) {
379         case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18:
380                 return true;
381         default:
382                 return false;
383         }
384 }
385
386 static const struct regmap_config tps80031_regmap_configs[] = {
387         {
388                 .reg_bits = 8,
389                 .val_bits = 8,
390                 .writeable_reg = rd_wr_reg_id0,
391                 .readable_reg = rd_wr_reg_id0,
392                 .max_register = TPS80031_MAX_REGISTER,
393         },
394         {
395                 .reg_bits = 8,
396                 .val_bits = 8,
397                 .writeable_reg = rd_wr_reg_id1,
398                 .readable_reg = rd_wr_reg_id1,
399                 .volatile_reg = is_volatile_reg_id1,
400                 .max_register = TPS80031_MAX_REGISTER,
401         },
402         {
403                 .reg_bits = 8,
404                 .val_bits = 8,
405                 .writeable_reg = rd_wr_reg_id2,
406                 .readable_reg = rd_wr_reg_id2,
407                 .max_register = TPS80031_MAX_REGISTER,
408         },
409         {
410                 .reg_bits = 8,
411                 .val_bits = 8,
412                 .writeable_reg = rd_wr_reg_id3,
413                 .readable_reg = rd_wr_reg_id3,
414                 .max_register = TPS80031_MAX_REGISTER,
415         },
416 };
417
418 static int tps80031_probe(struct i2c_client *client,
419                           const struct i2c_device_id *id)
420 {
421         struct tps80031_platform_data *pdata = dev_get_platdata(&client->dev);
422         struct tps80031 *tps80031;
423         int ret;
424         uint8_t es_version;
425         uint8_t ep_ver;
426         int i;
427
428         if (!pdata) {
429                 dev_err(&client->dev, "tps80031 requires platform data\n");
430                 return -EINVAL;
431         }
432
433         tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL);
434         if (!tps80031) {
435                 dev_err(&client->dev, "Malloc failed for tps80031\n");
436                 return -ENOMEM;
437         }
438
439         for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
440                 if (tps80031_slave_address[i] == client->addr)
441                         tps80031->clients[i] = client;
442                 else
443                         tps80031->clients[i] = i2c_new_dummy(client->adapter,
444                                                 tps80031_slave_address[i]);
445                 if (!tps80031->clients[i]) {
446                         dev_err(&client->dev, "can't attach client %d\n", i);
447                         ret = -ENOMEM;
448                         goto fail_client_reg;
449                 }
450
451                 i2c_set_clientdata(tps80031->clients[i], tps80031);
452                 tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i],
453                                         &tps80031_regmap_configs[i]);
454                 if (IS_ERR(tps80031->regmap[i])) {
455                         ret = PTR_ERR(tps80031->regmap[i]);
456                         dev_err(&client->dev,
457                                 "regmap %d init failed, err %d\n", i, ret);
458                         goto fail_client_reg;
459                 }
460         }
461
462         ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
463                         TPS80031_JTAGVERNUM, &es_version);
464         if (ret < 0) {
465                 dev_err(&client->dev,
466                         "Silicon version number read failed: %d\n", ret);
467                 goto fail_client_reg;
468         }
469
470         ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
471                         TPS80031_EPROM_REV, &ep_ver);
472         if (ret < 0) {
473                 dev_err(&client->dev,
474                         "Silicon eeprom version read failed: %d\n", ret);
475                 goto fail_client_reg;
476         }
477
478         dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n",
479                                         es_version, ep_ver);
480         tps80031->es_version = es_version;
481         tps80031->dev = &client->dev;
482         i2c_set_clientdata(client, tps80031);
483         tps80031->chip_info = id->driver_data;
484
485         ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base);
486         if (ret) {
487                 dev_err(&client->dev, "IRQ init failed: %d\n", ret);
488                 goto fail_client_reg;
489         }
490
491         tps80031_pupd_init(tps80031, pdata);
492
493         tps80031_init_ext_control(tps80031, pdata);
494
495         ret = mfd_add_devices(tps80031->dev, -1,
496                         tps80031_cell, ARRAY_SIZE(tps80031_cell),
497                         NULL, 0,
498                         regmap_irq_get_domain(tps80031->irq_data));
499         if (ret < 0) {
500                 dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
501                 goto fail_mfd_add;
502         }
503
504         if (pdata->use_power_off && !pm_power_off) {
505                 tps80031_power_off_dev = tps80031;
506                 pm_power_off = tps80031_power_off;
507         }
508         return 0;
509
510 fail_mfd_add:
511         regmap_del_irq_chip(client->irq, tps80031->irq_data);
512
513 fail_client_reg:
514         for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
515                 if (tps80031->clients[i]  && (tps80031->clients[i] != client))
516                         i2c_unregister_device(tps80031->clients[i]);
517         }
518         return ret;
519 }
520
521 static int tps80031_remove(struct i2c_client *client)
522 {
523         struct tps80031 *tps80031 = i2c_get_clientdata(client);
524         int i;
525
526         if (tps80031_power_off_dev == tps80031) {
527                 tps80031_power_off_dev = NULL;
528                 pm_power_off = NULL;
529         }
530
531         mfd_remove_devices(tps80031->dev);
532
533         regmap_del_irq_chip(client->irq, tps80031->irq_data);
534
535         for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
536                 if (tps80031->clients[i] != client)
537                         i2c_unregister_device(tps80031->clients[i]);
538         }
539         return 0;
540 }
541
542 static const struct i2c_device_id tps80031_id_table[] = {
543         { "tps80031", TPS80031 },
544         { "tps80032", TPS80032 },
545         { }
546 };
547 MODULE_DEVICE_TABLE(i2c, tps80031_id_table);
548
549 static struct i2c_driver tps80031_driver = {
550         .driver = {
551                 .name   = "tps80031",
552         },
553         .probe          = tps80031_probe,
554         .remove         = tps80031_remove,
555         .id_table       = tps80031_id_table,
556 };
557
558 static int __init tps80031_init(void)
559 {
560         return i2c_add_driver(&tps80031_driver);
561 }
562 subsys_initcall(tps80031_init);
563
564 static void __exit tps80031_exit(void)
565 {
566         i2c_del_driver(&tps80031_driver);
567 }
568 module_exit(tps80031_exit);
569
570 MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
571 MODULE_DESCRIPTION("TPS80031 core driver");
572 MODULE_LICENSE("GPL v2");