88bacdeb5a66b49ce8cba511f7d1a0a8e413b747
[firefly-linux-kernel-4.4.55.git] / drivers / dma / pl330.c
1 /*
2  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3  *              http://www.samsung.com
4  *
5  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6  *      Jaswinder Singh <jassi.brar@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/scatterlist.h>
27 #include <linux/of.h>
28 #include <linux/of_dma.h>
29 #include <linux/err.h>
30 #include <linux/pm_runtime.h>
31
32 #include "dmaengine.h"
33 #define PL330_MAX_CHAN          8
34 #define PL330_MAX_IRQS          32
35 #define PL330_MAX_PERI          32
36
37 #define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
38
39 enum pl330_cachectrl {
40         CCTRL0,         /* Noncacheable and nonbufferable */
41         CCTRL1,         /* Bufferable only */
42         CCTRL2,         /* Cacheable, but do not allocate */
43         CCTRL3,         /* Cacheable and bufferable, but do not allocate */
44         INVALID1,       /* AWCACHE = 0x1000 */
45         INVALID2,
46         CCTRL6,         /* Cacheable write-through, allocate on writes only */
47         CCTRL7,         /* Cacheable write-back, allocate on writes only */
48 };
49
50 enum pl330_byteswap {
51         SWAP_NO,
52         SWAP_2,
53         SWAP_4,
54         SWAP_8,
55         SWAP_16,
56 };
57
58 /* Register and Bit field Definitions */
59 #define DS                      0x0
60 #define DS_ST_STOP              0x0
61 #define DS_ST_EXEC              0x1
62 #define DS_ST_CMISS             0x2
63 #define DS_ST_UPDTPC            0x3
64 #define DS_ST_WFE               0x4
65 #define DS_ST_ATBRR             0x5
66 #define DS_ST_QBUSY             0x6
67 #define DS_ST_WFP               0x7
68 #define DS_ST_KILL              0x8
69 #define DS_ST_CMPLT             0x9
70 #define DS_ST_FLTCMP            0xe
71 #define DS_ST_FAULT             0xf
72
73 #define DPC                     0x4
74 #define INTEN                   0x20
75 #define ES                      0x24
76 #define INTSTATUS               0x28
77 #define INTCLR                  0x2c
78 #define FSM                     0x30
79 #define FSC                     0x34
80 #define FTM                     0x38
81
82 #define _FTC                    0x40
83 #define FTC(n)                  (_FTC + (n)*0x4)
84
85 #define _CS                     0x100
86 #define CS(n)                   (_CS + (n)*0x8)
87 #define CS_CNS                  (1 << 21)
88
89 #define _CPC                    0x104
90 #define CPC(n)                  (_CPC + (n)*0x8)
91
92 #define _SA                     0x400
93 #define SA(n)                   (_SA + (n)*0x20)
94
95 #define _DA                     0x404
96 #define DA(n)                   (_DA + (n)*0x20)
97
98 #define _CC                     0x408
99 #define CC(n)                   (_CC + (n)*0x20)
100
101 #define CC_SRCINC               (1 << 0)
102 #define CC_DSTINC               (1 << 14)
103 #define CC_SRCPRI               (1 << 8)
104 #define CC_DSTPRI               (1 << 22)
105 #define CC_SRCNS                (1 << 9)
106 #define CC_DSTNS                (1 << 23)
107 #define CC_SRCIA                (1 << 10)
108 #define CC_DSTIA                (1 << 24)
109 #define CC_SRCBRSTLEN_SHFT      4
110 #define CC_DSTBRSTLEN_SHFT      18
111 #define CC_SRCBRSTSIZE_SHFT     1
112 #define CC_DSTBRSTSIZE_SHFT     15
113 #define CC_SRCCCTRL_SHFT        11
114 #define CC_SRCCCTRL_MASK        0x7
115 #define CC_DSTCCTRL_SHFT        25
116 #define CC_DRCCCTRL_MASK        0x7
117 #define CC_SWAP_SHFT            28
118
119 #define _LC0                    0x40c
120 #define LC0(n)                  (_LC0 + (n)*0x20)
121
122 #define _LC1                    0x410
123 #define LC1(n)                  (_LC1 + (n)*0x20)
124
125 #define DBGSTATUS               0xd00
126 #define DBG_BUSY                (1 << 0)
127
128 #define DBGCMD                  0xd04
129 #define DBGINST0                0xd08
130 #define DBGINST1                0xd0c
131
132 #define CR0                     0xe00
133 #define CR1                     0xe04
134 #define CR2                     0xe08
135 #define CR3                     0xe0c
136 #define CR4                     0xe10
137 #define CRD                     0xe14
138
139 #define PERIPH_ID               0xfe0
140 #define PERIPH_REV_SHIFT        20
141 #define PERIPH_REV_MASK         0xf
142 #define PERIPH_REV_R0P0         0
143 #define PERIPH_REV_R1P0         1
144 #define PERIPH_REV_R1P1         2
145
146 #define CR0_PERIPH_REQ_SET      (1 << 0)
147 #define CR0_BOOT_EN_SET         (1 << 1)
148 #define CR0_BOOT_MAN_NS         (1 << 2)
149 #define CR0_NUM_CHANS_SHIFT     4
150 #define CR0_NUM_CHANS_MASK      0x7
151 #define CR0_NUM_PERIPH_SHIFT    12
152 #define CR0_NUM_PERIPH_MASK     0x1f
153 #define CR0_NUM_EVENTS_SHIFT    17
154 #define CR0_NUM_EVENTS_MASK     0x1f
155
156 #define CR1_ICACHE_LEN_SHIFT    0
157 #define CR1_ICACHE_LEN_MASK     0x7
158 #define CR1_NUM_ICACHELINES_SHIFT       4
159 #define CR1_NUM_ICACHELINES_MASK        0xf
160
161 #define CRD_DATA_WIDTH_SHIFT    0
162 #define CRD_DATA_WIDTH_MASK     0x7
163 #define CRD_WR_CAP_SHIFT        4
164 #define CRD_WR_CAP_MASK         0x7
165 #define CRD_WR_Q_DEP_SHIFT      8
166 #define CRD_WR_Q_DEP_MASK       0xf
167 #define CRD_RD_CAP_SHIFT        12
168 #define CRD_RD_CAP_MASK         0x7
169 #define CRD_RD_Q_DEP_SHIFT      16
170 #define CRD_RD_Q_DEP_MASK       0xf
171 #define CRD_DATA_BUFF_SHIFT     20
172 #define CRD_DATA_BUFF_MASK      0x3ff
173
174 #define PART                    0x330
175 #define DESIGNER                0x41
176 #define REVISION                0x0
177 #define INTEG_CFG               0x0
178 #define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
179
180 #define PL330_STATE_STOPPED             (1 << 0)
181 #define PL330_STATE_EXECUTING           (1 << 1)
182 #define PL330_STATE_WFE                 (1 << 2)
183 #define PL330_STATE_FAULTING            (1 << 3)
184 #define PL330_STATE_COMPLETING          (1 << 4)
185 #define PL330_STATE_WFP                 (1 << 5)
186 #define PL330_STATE_KILLING             (1 << 6)
187 #define PL330_STATE_FAULT_COMPLETING    (1 << 7)
188 #define PL330_STATE_CACHEMISS           (1 << 8)
189 #define PL330_STATE_UPDTPC              (1 << 9)
190 #define PL330_STATE_ATBARRIER           (1 << 10)
191 #define PL330_STATE_QUEUEBUSY           (1 << 11)
192 #define PL330_STATE_INVALID             (1 << 15)
193
194 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
195                                 | PL330_STATE_WFE | PL330_STATE_FAULTING)
196
197 #define CMD_DMAADDH             0x54
198 #define CMD_DMAEND              0x00
199 #define CMD_DMAFLUSHP           0x35
200 #define CMD_DMAGO               0xa0
201 #define CMD_DMALD               0x04
202 #define CMD_DMALDP              0x25
203 #define CMD_DMALP               0x20
204 #define CMD_DMALPEND            0x28
205 #define CMD_DMAKILL             0x01
206 #define CMD_DMAMOV              0xbc
207 #define CMD_DMANOP              0x18
208 #define CMD_DMARMB              0x12
209 #define CMD_DMASEV              0x34
210 #define CMD_DMAST               0x08
211 #define CMD_DMASTP              0x29
212 #define CMD_DMASTZ              0x0c
213 #define CMD_DMAWFE              0x36
214 #define CMD_DMAWFP              0x30
215 #define CMD_DMAWMB              0x13
216
217 #define SZ_DMAADDH              3
218 #define SZ_DMAEND               1
219 #define SZ_DMAFLUSHP            2
220 #define SZ_DMALD                1
221 #define SZ_DMALDP               2
222 #define SZ_DMALP                2
223 #define SZ_DMALPEND             2
224 #define SZ_DMAKILL              1
225 #define SZ_DMAMOV               6
226 #define SZ_DMANOP               1
227 #define SZ_DMARMB               1
228 #define SZ_DMASEV               2
229 #define SZ_DMAST                1
230 #define SZ_DMASTP               2
231 #define SZ_DMASTZ               1
232 #define SZ_DMAWFE               2
233 #define SZ_DMAWFP               2
234 #define SZ_DMAWMB               1
235 #define SZ_DMAGO                6
236
237 #define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
238 #define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
239
240 #define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
241 #define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
242
243 /*
244  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
245  * at 1byte/burst for P<->M and M<->M respectively.
246  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
247  * should be enough for P<->M and M<->M respectively.
248  */
249 #define MCODE_BUFF_PER_REQ      256
250
251 /* Use this _only_ to wait on transient states */
252 #define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
253
254 #ifdef PL330_DEBUG_MCGEN
255 static unsigned cmd_line;
256 #define PL330_DBGCMD_DUMP(off, x...)    do { \
257                                                 printk("%x:", cmd_line); \
258                                                 printk(x); \
259                                                 cmd_line += off; \
260                                         } while (0)
261 #define PL330_DBGMC_START(addr)         (cmd_line = addr)
262 #else
263 #define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
264 #define PL330_DBGMC_START(addr)         do {} while (0)
265 #endif
266
267 /* The number of default descriptors */
268
269 #define NR_DEFAULT_DESC 16
270
271 /* Delay for runtime PM autosuspend, ms */
272 #define PL330_AUTOSUSPEND_DELAY 20
273
274 /* Populated by the PL330 core driver for DMA API driver's info */
275 struct pl330_config {
276         u32     periph_id;
277 #define DMAC_MODE_NS    (1 << 0)
278         unsigned int    mode;
279         unsigned int    data_bus_width:10; /* In number of bits */
280         unsigned int    data_buf_dep:11;
281         unsigned int    num_chan:4;
282         unsigned int    num_peri:6;
283         u32             peri_ns;
284         unsigned int    num_events:6;
285         u32             irq_ns;
286 };
287
288 /**
289  * Request Configuration.
290  * The PL330 core does not modify this and uses the last
291  * working configuration if the request doesn't provide any.
292  *
293  * The Client may want to provide this info only for the
294  * first request and a request with new settings.
295  */
296 struct pl330_reqcfg {
297         /* Address Incrementing */
298         unsigned dst_inc:1;
299         unsigned src_inc:1;
300
301         /*
302          * For now, the SRC & DST protection levels
303          * and burst size/length are assumed same.
304          */
305         bool nonsecure;
306         bool privileged;
307         bool insnaccess;
308         unsigned brst_len:5;
309         unsigned brst_size:3; /* in power of 2 */
310
311         enum pl330_cachectrl dcctl;
312         enum pl330_cachectrl scctl;
313         enum pl330_byteswap swap;
314         struct pl330_config *pcfg;
315 };
316
317 /*
318  * One cycle of DMAC operation.
319  * There may be more than one xfer in a request.
320  */
321 struct pl330_xfer {
322         u32 src_addr;
323         u32 dst_addr;
324         /* Size to xfer */
325         u32 bytes;
326 };
327
328 /* The xfer callbacks are made with one of these arguments. */
329 enum pl330_op_err {
330         /* The all xfers in the request were success. */
331         PL330_ERR_NONE,
332         /* If req aborted due to global error. */
333         PL330_ERR_ABORT,
334         /* If req failed due to problem with Channel. */
335         PL330_ERR_FAIL,
336 };
337
338 enum dmamov_dst {
339         SAR = 0,
340         CCR,
341         DAR,
342 };
343
344 enum pl330_dst {
345         SRC = 0,
346         DST,
347 };
348
349 enum pl330_cond {
350         SINGLE,
351         BURST,
352         ALWAYS,
353 };
354
355 struct dma_pl330_desc;
356
357 struct _pl330_req {
358         u32 mc_bus;
359         void *mc_cpu;
360         struct dma_pl330_desc *desc;
361 };
362
363 /* ToBeDone for tasklet */
364 struct _pl330_tbd {
365         bool reset_dmac;
366         bool reset_mngr;
367         u8 reset_chan;
368 };
369
370 /* A DMAC Thread */
371 struct pl330_thread {
372         u8 id;
373         int ev;
374         /* If the channel is not yet acquired by any client */
375         bool free;
376         /* Parent DMAC */
377         struct pl330_dmac *dmac;
378         /* Only two at a time */
379         struct _pl330_req req[2];
380         /* Index of the last enqueued request */
381         unsigned lstenq;
382         /* Index of the last submitted request or -1 if the DMA is stopped */
383         int req_running;
384 };
385
386 enum pl330_dmac_state {
387         UNINIT,
388         INIT,
389         DYING,
390 };
391
392 enum desc_status {
393         /* In the DMAC pool */
394         FREE,
395         /*
396          * Allocated to some channel during prep_xxx
397          * Also may be sitting on the work_list.
398          */
399         PREP,
400         /*
401          * Sitting on the work_list and already submitted
402          * to the PL330 core. Not more than two descriptors
403          * of a channel can be BUSY at any time.
404          */
405         BUSY,
406         /*
407          * Sitting on the channel work_list but xfer done
408          * by PL330 core
409          */
410         DONE,
411 };
412
413 struct dma_pl330_chan {
414         /* Schedule desc completion */
415         struct tasklet_struct task;
416
417         /* DMA-Engine Channel */
418         struct dma_chan chan;
419
420         /* List of submitted descriptors */
421         struct list_head submitted_list;
422         /* List of issued descriptors */
423         struct list_head work_list;
424         /* List of completed descriptors */
425         struct list_head completed_list;
426
427         /* Pointer to the DMAC that manages this channel,
428          * NULL if the channel is available to be acquired.
429          * As the parent, this DMAC also provides descriptors
430          * to the channel.
431          */
432         struct pl330_dmac *dmac;
433
434         /* To protect channel manipulation */
435         spinlock_t lock;
436
437         /*
438          * Hardware channel thread of PL330 DMAC. NULL if the channel is
439          * available.
440          */
441         struct pl330_thread *thread;
442
443         /* For D-to-M and M-to-D channels */
444         int burst_sz; /* the peripheral fifo width */
445         int burst_len; /* the number of burst */
446         dma_addr_t fifo_addr;
447
448         /* for cyclic capability */
449         bool cyclic;
450 };
451
452 struct pl330_dmac {
453         /* DMA-Engine Device */
454         struct dma_device ddma;
455
456         /* Holds info about sg limitations */
457         struct device_dma_parameters dma_parms;
458
459         /* Pool of descriptors available for the DMAC's channels */
460         struct list_head desc_pool;
461         /* To protect desc_pool manipulation */
462         spinlock_t pool_lock;
463
464         /* Size of MicroCode buffers for each channel. */
465         unsigned mcbufsz;
466         /* ioremap'ed address of PL330 registers. */
467         void __iomem    *base;
468         /* Populated by the PL330 core driver during pl330_add */
469         struct pl330_config     pcfg;
470
471         spinlock_t              lock;
472         /* Maximum possible events/irqs */
473         int                     events[32];
474         /* BUS address of MicroCode buffer */
475         dma_addr_t              mcode_bus;
476         /* CPU address of MicroCode buffer */
477         void                    *mcode_cpu;
478         /* List of all Channel threads */
479         struct pl330_thread     *channels;
480         /* Pointer to the MANAGER thread */
481         struct pl330_thread     *manager;
482         /* To handle bad news in interrupt */
483         struct tasklet_struct   tasks;
484         struct _pl330_tbd       dmac_tbd;
485         /* State of DMAC operation */
486         enum pl330_dmac_state   state;
487         /* Holds list of reqs with due callbacks */
488         struct list_head        req_done;
489
490         /* Peripheral channels connected to this DMAC */
491         unsigned int num_peripherals;
492         struct dma_pl330_chan *peripherals; /* keep at end */
493         int quirks;
494 };
495
496 static struct pl330_of_quirks {
497         char *quirk;
498         int id;
499 } of_quirks[] = {
500         {
501                 .quirk = "arm,pl330-broken-no-flushp",
502                 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
503         }
504 };
505
506 struct dma_pl330_desc {
507         /* To attach to a queue as child */
508         struct list_head node;
509
510         /* Descriptor for the DMA Engine API */
511         struct dma_async_tx_descriptor txd;
512
513         /* Xfer for PL330 core */
514         struct pl330_xfer px;
515
516         struct pl330_reqcfg rqcfg;
517
518         enum desc_status status;
519
520         int bytes_requested;
521         bool last;
522
523         /* The channel which currently holds this desc */
524         struct dma_pl330_chan *pchan;
525
526         enum dma_transfer_direction rqtype;
527         /* Index of peripheral for the xfer. */
528         unsigned peri:5;
529         /* Hook to attach to DMAC's list of reqs with due callback */
530         struct list_head rqd;
531 };
532
533 struct _xfer_spec {
534         u32 ccr;
535         struct dma_pl330_desc *desc;
536 };
537
538 static inline bool _queue_empty(struct pl330_thread *thrd)
539 {
540         return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
541 }
542
543 static inline bool _queue_full(struct pl330_thread *thrd)
544 {
545         return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
546 }
547
548 static inline bool is_manager(struct pl330_thread *thrd)
549 {
550         return thrd->dmac->manager == thrd;
551 }
552
553 /* If manager of the thread is in Non-Secure mode */
554 static inline bool _manager_ns(struct pl330_thread *thrd)
555 {
556         return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
557 }
558
559 static inline u32 get_revision(u32 periph_id)
560 {
561         return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
562 }
563
564 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
565                 enum pl330_dst da, u16 val)
566 {
567         if (dry_run)
568                 return SZ_DMAADDH;
569
570         buf[0] = CMD_DMAADDH;
571         buf[0] |= (da << 1);
572         *((__le16 *)&buf[1]) = cpu_to_le16(val);
573
574         PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
575                 da == 1 ? "DA" : "SA", val);
576
577         return SZ_DMAADDH;
578 }
579
580 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
581 {
582         if (dry_run)
583                 return SZ_DMAEND;
584
585         buf[0] = CMD_DMAEND;
586
587         PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
588
589         return SZ_DMAEND;
590 }
591
592 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
593 {
594         if (dry_run)
595                 return SZ_DMAFLUSHP;
596
597         buf[0] = CMD_DMAFLUSHP;
598
599         peri &= 0x1f;
600         peri <<= 3;
601         buf[1] = peri;
602
603         PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
604
605         return SZ_DMAFLUSHP;
606 }
607
608 static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
609 {
610         if (dry_run)
611                 return SZ_DMALD;
612
613         buf[0] = CMD_DMALD;
614
615         if (cond == SINGLE)
616                 buf[0] |= (0 << 1) | (1 << 0);
617         else if (cond == BURST)
618                 buf[0] |= (1 << 1) | (1 << 0);
619
620         PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
621                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
622
623         return SZ_DMALD;
624 }
625
626 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
627                 enum pl330_cond cond, u8 peri)
628 {
629         if (dry_run)
630                 return SZ_DMALDP;
631
632         buf[0] = CMD_DMALDP;
633
634         if (cond == BURST)
635                 buf[0] |= (1 << 1);
636
637         peri &= 0x1f;
638         peri <<= 3;
639         buf[1] = peri;
640
641         PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
642                 cond == SINGLE ? 'S' : 'B', peri >> 3);
643
644         return SZ_DMALDP;
645 }
646
647 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
648                 unsigned loop, u8 cnt)
649 {
650         if (dry_run)
651                 return SZ_DMALP;
652
653         buf[0] = CMD_DMALP;
654
655         if (loop)
656                 buf[0] |= (1 << 1);
657
658         cnt--; /* DMAC increments by 1 internally */
659         buf[1] = cnt;
660
661         PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
662
663         return SZ_DMALP;
664 }
665
666 struct _arg_LPEND {
667         enum pl330_cond cond;
668         bool forever;
669         unsigned loop;
670         u8 bjump;
671 };
672
673 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
674                 const struct _arg_LPEND *arg)
675 {
676         enum pl330_cond cond = arg->cond;
677         bool forever = arg->forever;
678         unsigned loop = arg->loop;
679         u8 bjump = arg->bjump;
680
681         if (dry_run)
682                 return SZ_DMALPEND;
683
684         buf[0] = CMD_DMALPEND;
685
686         if (loop)
687                 buf[0] |= (1 << 2);
688
689         if (!forever)
690                 buf[0] |= (1 << 4);
691
692         if (cond == SINGLE)
693                 buf[0] |= (0 << 1) | (1 << 0);
694         else if (cond == BURST)
695                 buf[0] |= (1 << 1) | (1 << 0);
696
697         buf[1] = bjump;
698
699         PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
700                         forever ? "FE" : "END",
701                         cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
702                         loop ? '1' : '0',
703                         bjump);
704
705         return SZ_DMALPEND;
706 }
707
708 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
709 {
710         if (dry_run)
711                 return SZ_DMAKILL;
712
713         buf[0] = CMD_DMAKILL;
714
715         return SZ_DMAKILL;
716 }
717
718 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
719                 enum dmamov_dst dst, u32 val)
720 {
721         if (dry_run)
722                 return SZ_DMAMOV;
723
724         buf[0] = CMD_DMAMOV;
725         buf[1] = dst;
726         *((__le32 *)&buf[2]) = cpu_to_le32(val);
727
728         PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
729                 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
730
731         return SZ_DMAMOV;
732 }
733
734 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
735 {
736         if (dry_run)
737                 return SZ_DMANOP;
738
739         buf[0] = CMD_DMANOP;
740
741         PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
742
743         return SZ_DMANOP;
744 }
745
746 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
747 {
748         if (dry_run)
749                 return SZ_DMARMB;
750
751         buf[0] = CMD_DMARMB;
752
753         PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
754
755         return SZ_DMARMB;
756 }
757
758 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
759 {
760         if (dry_run)
761                 return SZ_DMASEV;
762
763         buf[0] = CMD_DMASEV;
764
765         ev &= 0x1f;
766         ev <<= 3;
767         buf[1] = ev;
768
769         PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
770
771         return SZ_DMASEV;
772 }
773
774 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
775 {
776         if (dry_run)
777                 return SZ_DMAST;
778
779         buf[0] = CMD_DMAST;
780
781         if (cond == SINGLE)
782                 buf[0] |= (0 << 1) | (1 << 0);
783         else if (cond == BURST)
784                 buf[0] |= (1 << 1) | (1 << 0);
785
786         PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
787                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
788
789         return SZ_DMAST;
790 }
791
792 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
793                 enum pl330_cond cond, u8 peri)
794 {
795         if (dry_run)
796                 return SZ_DMASTP;
797
798         buf[0] = CMD_DMASTP;
799
800         if (cond == BURST)
801                 buf[0] |= (1 << 1);
802
803         peri &= 0x1f;
804         peri <<= 3;
805         buf[1] = peri;
806
807         PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
808                 cond == SINGLE ? 'S' : 'B', peri >> 3);
809
810         return SZ_DMASTP;
811 }
812
813 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
814 {
815         if (dry_run)
816                 return SZ_DMASTZ;
817
818         buf[0] = CMD_DMASTZ;
819
820         PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
821
822         return SZ_DMASTZ;
823 }
824
825 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
826                 unsigned invalidate)
827 {
828         if (dry_run)
829                 return SZ_DMAWFE;
830
831         buf[0] = CMD_DMAWFE;
832
833         ev &= 0x1f;
834         ev <<= 3;
835         buf[1] = ev;
836
837         if (invalidate)
838                 buf[1] |= (1 << 1);
839
840         PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
841                 ev >> 3, invalidate ? ", I" : "");
842
843         return SZ_DMAWFE;
844 }
845
846 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
847                 enum pl330_cond cond, u8 peri)
848 {
849         if (dry_run)
850                 return SZ_DMAWFP;
851
852         buf[0] = CMD_DMAWFP;
853
854         if (cond == SINGLE)
855                 buf[0] |= (0 << 1) | (0 << 0);
856         else if (cond == BURST)
857                 buf[0] |= (1 << 1) | (0 << 0);
858         else
859                 buf[0] |= (0 << 1) | (1 << 0);
860
861         peri &= 0x1f;
862         peri <<= 3;
863         buf[1] = peri;
864
865         PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
866                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
867
868         return SZ_DMAWFP;
869 }
870
871 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
872 {
873         if (dry_run)
874                 return SZ_DMAWMB;
875
876         buf[0] = CMD_DMAWMB;
877
878         PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
879
880         return SZ_DMAWMB;
881 }
882
883 struct _arg_GO {
884         u8 chan;
885         u32 addr;
886         unsigned ns;
887 };
888
889 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
890                 const struct _arg_GO *arg)
891 {
892         u8 chan = arg->chan;
893         u32 addr = arg->addr;
894         unsigned ns = arg->ns;
895
896         if (dry_run)
897                 return SZ_DMAGO;
898
899         buf[0] = CMD_DMAGO;
900         buf[0] |= (ns << 1);
901
902         buf[1] = chan & 0x7;
903
904         *((__le32 *)&buf[2]) = cpu_to_le32(addr);
905
906         return SZ_DMAGO;
907 }
908
909 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
910
911 /* Returns Time-Out */
912 static bool _until_dmac_idle(struct pl330_thread *thrd)
913 {
914         void __iomem *regs = thrd->dmac->base;
915         unsigned long loops = msecs_to_loops(5);
916
917         do {
918                 /* Until Manager is Idle */
919                 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
920                         break;
921
922                 cpu_relax();
923         } while (--loops);
924
925         if (!loops)
926                 return true;
927
928         return false;
929 }
930
931 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
932                 u8 insn[], bool as_manager)
933 {
934         void __iomem *regs = thrd->dmac->base;
935         u32 val;
936
937         val = (insn[0] << 16) | (insn[1] << 24);
938         if (!as_manager) {
939                 val |= (1 << 0);
940                 val |= (thrd->id << 8); /* Channel Number */
941         }
942         writel(val, regs + DBGINST0);
943
944         val = le32_to_cpu(*((__le32 *)&insn[2]));
945         writel(val, regs + DBGINST1);
946
947         /* If timed out due to halted state-machine */
948         if (_until_dmac_idle(thrd)) {
949                 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
950                 return;
951         }
952
953         /* Get going */
954         writel(0, regs + DBGCMD);
955 }
956
957 static inline u32 _state(struct pl330_thread *thrd)
958 {
959         void __iomem *regs = thrd->dmac->base;
960         u32 val;
961
962         if (is_manager(thrd))
963                 val = readl(regs + DS) & 0xf;
964         else
965                 val = readl(regs + CS(thrd->id)) & 0xf;
966
967         switch (val) {
968         case DS_ST_STOP:
969                 return PL330_STATE_STOPPED;
970         case DS_ST_EXEC:
971                 return PL330_STATE_EXECUTING;
972         case DS_ST_CMISS:
973                 return PL330_STATE_CACHEMISS;
974         case DS_ST_UPDTPC:
975                 return PL330_STATE_UPDTPC;
976         case DS_ST_WFE:
977                 return PL330_STATE_WFE;
978         case DS_ST_FAULT:
979                 return PL330_STATE_FAULTING;
980         case DS_ST_ATBRR:
981                 if (is_manager(thrd))
982                         return PL330_STATE_INVALID;
983                 else
984                         return PL330_STATE_ATBARRIER;
985         case DS_ST_QBUSY:
986                 if (is_manager(thrd))
987                         return PL330_STATE_INVALID;
988                 else
989                         return PL330_STATE_QUEUEBUSY;
990         case DS_ST_WFP:
991                 if (is_manager(thrd))
992                         return PL330_STATE_INVALID;
993                 else
994                         return PL330_STATE_WFP;
995         case DS_ST_KILL:
996                 if (is_manager(thrd))
997                         return PL330_STATE_INVALID;
998                 else
999                         return PL330_STATE_KILLING;
1000         case DS_ST_CMPLT:
1001                 if (is_manager(thrd))
1002                         return PL330_STATE_INVALID;
1003                 else
1004                         return PL330_STATE_COMPLETING;
1005         case DS_ST_FLTCMP:
1006                 if (is_manager(thrd))
1007                         return PL330_STATE_INVALID;
1008                 else
1009                         return PL330_STATE_FAULT_COMPLETING;
1010         default:
1011                 return PL330_STATE_INVALID;
1012         }
1013 }
1014
1015 static void _stop(struct pl330_thread *thrd)
1016 {
1017         void __iomem *regs = thrd->dmac->base;
1018         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1019
1020         if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1021                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1022
1023         /* Return if nothing needs to be done */
1024         if (_state(thrd) == PL330_STATE_COMPLETING
1025                   || _state(thrd) == PL330_STATE_KILLING
1026                   || _state(thrd) == PL330_STATE_STOPPED)
1027                 return;
1028
1029         _emit_KILL(0, insn);
1030
1031         /* Stop generating interrupts for SEV */
1032         writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1033
1034         _execute_DBGINSN(thrd, insn, is_manager(thrd));
1035 }
1036
1037 /* Start doing req 'idx' of thread 'thrd' */
1038 static bool _trigger(struct pl330_thread *thrd)
1039 {
1040         void __iomem *regs = thrd->dmac->base;
1041         struct _pl330_req *req;
1042         struct dma_pl330_desc *desc;
1043         struct _arg_GO go;
1044         unsigned ns;
1045         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1046         int idx;
1047
1048         /* Return if already ACTIVE */
1049         if (_state(thrd) != PL330_STATE_STOPPED)
1050                 return true;
1051
1052         idx = 1 - thrd->lstenq;
1053         if (thrd->req[idx].desc != NULL) {
1054                 req = &thrd->req[idx];
1055         } else {
1056                 idx = thrd->lstenq;
1057                 if (thrd->req[idx].desc != NULL)
1058                         req = &thrd->req[idx];
1059                 else
1060                         req = NULL;
1061         }
1062
1063         /* Return if no request */
1064         if (!req)
1065                 return true;
1066
1067         /* Return if req is running */
1068         if (idx == thrd->req_running)
1069                 return true;
1070
1071         desc = req->desc;
1072
1073         ns = desc->rqcfg.nonsecure ? 1 : 0;
1074
1075         /* See 'Abort Sources' point-4 at Page 2-25 */
1076         if (_manager_ns(thrd) && !ns)
1077                 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1078                         __func__, __LINE__);
1079
1080         go.chan = thrd->id;
1081         go.addr = req->mc_bus;
1082         go.ns = ns;
1083         _emit_GO(0, insn, &go);
1084
1085         /* Set to generate interrupts for SEV */
1086         writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1087
1088         /* Only manager can execute GO */
1089         _execute_DBGINSN(thrd, insn, true);
1090
1091         thrd->req_running = idx;
1092
1093         return true;
1094 }
1095
1096 static bool _start(struct pl330_thread *thrd)
1097 {
1098         switch (_state(thrd)) {
1099         case PL330_STATE_FAULT_COMPLETING:
1100                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1101
1102                 if (_state(thrd) == PL330_STATE_KILLING)
1103                         UNTIL(thrd, PL330_STATE_STOPPED)
1104
1105         case PL330_STATE_FAULTING:
1106                 _stop(thrd);
1107
1108         case PL330_STATE_KILLING:
1109         case PL330_STATE_COMPLETING:
1110                 UNTIL(thrd, PL330_STATE_STOPPED)
1111
1112         case PL330_STATE_STOPPED:
1113                 return _trigger(thrd);
1114
1115         case PL330_STATE_WFP:
1116         case PL330_STATE_QUEUEBUSY:
1117         case PL330_STATE_ATBARRIER:
1118         case PL330_STATE_UPDTPC:
1119         case PL330_STATE_CACHEMISS:
1120         case PL330_STATE_EXECUTING:
1121                 return true;
1122
1123         case PL330_STATE_WFE: /* For RESUME, nothing yet */
1124         default:
1125                 return false;
1126         }
1127 }
1128
1129 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1130                 const struct _xfer_spec *pxs, int cyc)
1131 {
1132         int off = 0;
1133         struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1134
1135         /* check lock-up free version */
1136         if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1137                 while (cyc--) {
1138                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1139                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1140                 }
1141         } else {
1142                 while (cyc--) {
1143                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1144                         off += _emit_RMB(dry_run, &buf[off]);
1145                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1146                         off += _emit_WMB(dry_run, &buf[off]);
1147                 }
1148         }
1149
1150         return off;
1151 }
1152
1153 static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
1154                                  u8 buf[], const struct _xfer_spec *pxs,
1155                                  int cyc)
1156 {
1157         int off = 0;
1158         enum pl330_cond cond;
1159
1160         if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1161                 cond = BURST;
1162         else
1163                 cond = SINGLE;
1164
1165         while (cyc--) {
1166                 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1167                 off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
1168                 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1169
1170                 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1171                         off += _emit_FLUSHP(dry_run, &buf[off],
1172                                             pxs->desc->peri);
1173         }
1174
1175         return off;
1176 }
1177
1178 static inline int _ldst_memtodev(struct pl330_dmac *pl330,
1179                                  unsigned dry_run, u8 buf[],
1180                                  const struct _xfer_spec *pxs, int cyc)
1181 {
1182         int off = 0;
1183         enum pl330_cond cond;
1184
1185         if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1186                 cond = BURST;
1187         else
1188                 cond = SINGLE;
1189
1190         while (cyc--) {
1191                 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1192                 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1193                 off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
1194
1195                 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1196                         off += _emit_FLUSHP(dry_run, &buf[off],
1197                                             pxs->desc->peri);
1198         }
1199
1200         return off;
1201 }
1202
1203 static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1204                 const struct _xfer_spec *pxs, int cyc)
1205 {
1206         int off = 0;
1207
1208         switch (pxs->desc->rqtype) {
1209         case DMA_MEM_TO_DEV:
1210                 off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
1211                 break;
1212         case DMA_DEV_TO_MEM:
1213                 off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
1214                 break;
1215         case DMA_MEM_TO_MEM:
1216                 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1217                 break;
1218         default:
1219                 off += 0x40000000; /* Scare off the Client */
1220                 break;
1221         }
1222
1223         return off;
1224 }
1225
1226 /* Returns bytes consumed and updates bursts */
1227 static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1228                 unsigned long *bursts, const struct _xfer_spec *pxs)
1229 {
1230         int cyc, cycmax, szlp, szlpend, szbrst, off;
1231         unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1232         struct _arg_LPEND lpend;
1233
1234         if (*bursts == 1)
1235                 return _bursts(pl330, dry_run, buf, pxs, 1);
1236
1237         /* Max iterations possible in DMALP is 256 */
1238         if (*bursts >= 256*256) {
1239                 lcnt1 = 256;
1240                 lcnt0 = 256;
1241                 cyc = *bursts / lcnt1 / lcnt0;
1242         } else if (*bursts > 256) {
1243                 lcnt1 = 256;
1244                 lcnt0 = *bursts / lcnt1;
1245                 cyc = 1;
1246         } else {
1247                 lcnt1 = *bursts;
1248                 lcnt0 = 0;
1249                 cyc = 1;
1250         }
1251
1252         szlp = _emit_LP(1, buf, 0, 0);
1253         szbrst = _bursts(pl330, 1, buf, pxs, 1);
1254
1255         lpend.cond = ALWAYS;
1256         lpend.forever = false;
1257         lpend.loop = 0;
1258         lpend.bjump = 0;
1259         szlpend = _emit_LPEND(1, buf, &lpend);
1260
1261         if (lcnt0) {
1262                 szlp *= 2;
1263                 szlpend *= 2;
1264         }
1265
1266         /*
1267          * Max bursts that we can unroll due to limit on the
1268          * size of backward jump that can be encoded in DMALPEND
1269          * which is 8-bits and hence 255
1270          */
1271         cycmax = (255 - (szlp + szlpend)) / szbrst;
1272
1273         cyc = (cycmax < cyc) ? cycmax : cyc;
1274
1275         off = 0;
1276
1277         if (lcnt0) {
1278                 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1279                 ljmp0 = off;
1280         }
1281
1282         off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1283         ljmp1 = off;
1284
1285         off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1286
1287         lpend.cond = ALWAYS;
1288         lpend.forever = false;
1289         lpend.loop = 1;
1290         lpend.bjump = off - ljmp1;
1291         off += _emit_LPEND(dry_run, &buf[off], &lpend);
1292
1293         if (lcnt0) {
1294                 lpend.cond = ALWAYS;
1295                 lpend.forever = false;
1296                 lpend.loop = 0;
1297                 lpend.bjump = off - ljmp0;
1298                 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1299         }
1300
1301         *bursts = lcnt1 * cyc;
1302         if (lcnt0)
1303                 *bursts *= lcnt0;
1304
1305         return off;
1306 }
1307
1308 static inline int _setup_loops(struct pl330_dmac *pl330,
1309                                unsigned dry_run, u8 buf[],
1310                                const struct _xfer_spec *pxs)
1311 {
1312         struct pl330_xfer *x = &pxs->desc->px;
1313         u32 ccr = pxs->ccr;
1314         unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1315         int off = 0;
1316
1317         while (bursts) {
1318                 c = bursts;
1319                 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1320                 bursts -= c;
1321         }
1322
1323         return off;
1324 }
1325
1326 static inline int _setup_xfer(struct pl330_dmac *pl330,
1327                               unsigned dry_run, u8 buf[],
1328                               const struct _xfer_spec *pxs)
1329 {
1330         struct pl330_xfer *x = &pxs->desc->px;
1331         int off = 0;
1332
1333         /* DMAMOV SAR, x->src_addr */
1334         off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1335         /* DMAMOV DAR, x->dst_addr */
1336         off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1337
1338         /* Setup Loop(s) */
1339         off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1340
1341         return off;
1342 }
1343
1344 /*
1345  * A req is a sequence of one or more xfer units.
1346  * Returns the number of bytes taken to setup the MC for the req.
1347  */
1348 static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1349                       struct pl330_thread *thrd, unsigned index,
1350                       struct _xfer_spec *pxs)
1351 {
1352         struct _pl330_req *req = &thrd->req[index];
1353         struct pl330_xfer *x;
1354         u8 *buf = req->mc_cpu;
1355         int off = 0;
1356
1357         PL330_DBGMC_START(req->mc_bus);
1358
1359         /* DMAMOV CCR, ccr */
1360         off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1361
1362         x = &pxs->desc->px;
1363         /* Error if xfer length is not aligned at burst size */
1364         if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1365                 return -EINVAL;
1366
1367         off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1368
1369         /* DMASEV peripheral/event */
1370         off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1371         /* DMAEND */
1372         off += _emit_END(dry_run, &buf[off]);
1373
1374         return off;
1375 }
1376
1377 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1378 {
1379         u32 ccr = 0;
1380
1381         if (rqc->src_inc)
1382                 ccr |= CC_SRCINC;
1383
1384         if (rqc->dst_inc)
1385                 ccr |= CC_DSTINC;
1386
1387         /* We set same protection levels for Src and DST for now */
1388         if (rqc->privileged)
1389                 ccr |= CC_SRCPRI | CC_DSTPRI;
1390         if (rqc->nonsecure)
1391                 ccr |= CC_SRCNS | CC_DSTNS;
1392         if (rqc->insnaccess)
1393                 ccr |= CC_SRCIA | CC_DSTIA;
1394
1395         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1396         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1397
1398         ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1399         ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1400
1401         ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1402         ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1403
1404         ccr |= (rqc->swap << CC_SWAP_SHFT);
1405
1406         return ccr;
1407 }
1408
1409 /*
1410  * Submit a list of xfers after which the client wants notification.
1411  * Client is not notified after each xfer unit, just once after all
1412  * xfer units are done or some error occurs.
1413  */
1414 static int pl330_submit_req(struct pl330_thread *thrd,
1415         struct dma_pl330_desc *desc)
1416 {
1417         struct pl330_dmac *pl330 = thrd->dmac;
1418         struct _xfer_spec xs;
1419         unsigned long flags;
1420         unsigned idx;
1421         u32 ccr;
1422         int ret = 0;
1423
1424         if (pl330->state == DYING
1425                 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1426                 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1427                         __func__, __LINE__);
1428                 return -EAGAIN;
1429         }
1430
1431         /* If request for non-existing peripheral */
1432         if (desc->rqtype != DMA_MEM_TO_MEM &&
1433             desc->peri >= pl330->pcfg.num_peri) {
1434                 dev_info(thrd->dmac->ddma.dev,
1435                                 "%s:%d Invalid peripheral(%u)!\n",
1436                                 __func__, __LINE__, desc->peri);
1437                 return -EINVAL;
1438         }
1439
1440         spin_lock_irqsave(&pl330->lock, flags);
1441
1442         if (_queue_full(thrd)) {
1443                 ret = -EAGAIN;
1444                 goto xfer_exit;
1445         }
1446
1447         /* Prefer Secure Channel */
1448         if (!_manager_ns(thrd))
1449                 desc->rqcfg.nonsecure = 0;
1450         else
1451                 desc->rqcfg.nonsecure = 1;
1452
1453         ccr = _prepare_ccr(&desc->rqcfg);
1454
1455         idx = thrd->req[0].desc == NULL ? 0 : 1;
1456
1457         xs.ccr = ccr;
1458         xs.desc = desc;
1459
1460         /* First dry run to check if req is acceptable */
1461         ret = _setup_req(pl330, 1, thrd, idx, &xs);
1462         if (ret < 0)
1463                 goto xfer_exit;
1464
1465         if (ret > pl330->mcbufsz / 2) {
1466                 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1467                                 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1468                 ret = -ENOMEM;
1469                 goto xfer_exit;
1470         }
1471
1472         /* Hook the request */
1473         thrd->lstenq = idx;
1474         thrd->req[idx].desc = desc;
1475         _setup_req(pl330, 0, thrd, idx, &xs);
1476
1477         ret = 0;
1478
1479 xfer_exit:
1480         spin_unlock_irqrestore(&pl330->lock, flags);
1481
1482         return ret;
1483 }
1484
1485 static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1486 {
1487         struct dma_pl330_chan *pch;
1488         unsigned long flags;
1489
1490         if (!desc)
1491                 return;
1492
1493         pch = desc->pchan;
1494
1495         /* If desc aborted */
1496         if (!pch)
1497                 return;
1498
1499         spin_lock_irqsave(&pch->lock, flags);
1500
1501         desc->status = DONE;
1502
1503         spin_unlock_irqrestore(&pch->lock, flags);
1504
1505         tasklet_schedule(&pch->task);
1506 }
1507
1508 static void pl330_dotask(unsigned long data)
1509 {
1510         struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1511         unsigned long flags;
1512         int i;
1513
1514         spin_lock_irqsave(&pl330->lock, flags);
1515
1516         /* The DMAC itself gone nuts */
1517         if (pl330->dmac_tbd.reset_dmac) {
1518                 pl330->state = DYING;
1519                 /* Reset the manager too */
1520                 pl330->dmac_tbd.reset_mngr = true;
1521                 /* Clear the reset flag */
1522                 pl330->dmac_tbd.reset_dmac = false;
1523         }
1524
1525         if (pl330->dmac_tbd.reset_mngr) {
1526                 _stop(pl330->manager);
1527                 /* Reset all channels */
1528                 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1529                 /* Clear the reset flag */
1530                 pl330->dmac_tbd.reset_mngr = false;
1531         }
1532
1533         for (i = 0; i < pl330->pcfg.num_chan; i++) {
1534
1535                 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1536                         struct pl330_thread *thrd = &pl330->channels[i];
1537                         void __iomem *regs = pl330->base;
1538                         enum pl330_op_err err;
1539
1540                         _stop(thrd);
1541
1542                         if (readl(regs + FSC) & (1 << thrd->id))
1543                                 err = PL330_ERR_FAIL;
1544                         else
1545                                 err = PL330_ERR_ABORT;
1546
1547                         spin_unlock_irqrestore(&pl330->lock, flags);
1548                         dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1549                         dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1550                         spin_lock_irqsave(&pl330->lock, flags);
1551
1552                         thrd->req[0].desc = NULL;
1553                         thrd->req[1].desc = NULL;
1554                         thrd->req_running = -1;
1555
1556                         /* Clear the reset flag */
1557                         pl330->dmac_tbd.reset_chan &= ~(1 << i);
1558                 }
1559         }
1560
1561         spin_unlock_irqrestore(&pl330->lock, flags);
1562
1563         return;
1564 }
1565
1566 /* Returns 1 if state was updated, 0 otherwise */
1567 static int pl330_update(struct pl330_dmac *pl330)
1568 {
1569         struct dma_pl330_desc *descdone, *tmp;
1570         unsigned long flags;
1571         void __iomem *regs;
1572         u32 val;
1573         int id, ev, ret = 0;
1574
1575         regs = pl330->base;
1576
1577         spin_lock_irqsave(&pl330->lock, flags);
1578
1579         val = readl(regs + FSM) & 0x1;
1580         if (val)
1581                 pl330->dmac_tbd.reset_mngr = true;
1582         else
1583                 pl330->dmac_tbd.reset_mngr = false;
1584
1585         val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1586         pl330->dmac_tbd.reset_chan |= val;
1587         if (val) {
1588                 int i = 0;
1589                 while (i < pl330->pcfg.num_chan) {
1590                         if (val & (1 << i)) {
1591                                 dev_info(pl330->ddma.dev,
1592                                         "Reset Channel-%d\t CS-%x FTC-%x\n",
1593                                                 i, readl(regs + CS(i)),
1594                                                 readl(regs + FTC(i)));
1595                                 _stop(&pl330->channels[i]);
1596                         }
1597                         i++;
1598                 }
1599         }
1600
1601         /* Check which event happened i.e, thread notified */
1602         val = readl(regs + ES);
1603         if (pl330->pcfg.num_events < 32
1604                         && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1605                 pl330->dmac_tbd.reset_dmac = true;
1606                 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1607                         __LINE__);
1608                 ret = 1;
1609                 goto updt_exit;
1610         }
1611
1612         for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1613                 if (val & (1 << ev)) { /* Event occurred */
1614                         struct pl330_thread *thrd;
1615                         u32 inten = readl(regs + INTEN);
1616                         int active;
1617
1618                         /* Clear the event */
1619                         if (inten & (1 << ev))
1620                                 writel(1 << ev, regs + INTCLR);
1621
1622                         ret = 1;
1623
1624                         id = pl330->events[ev];
1625
1626                         thrd = &pl330->channels[id];
1627
1628                         active = thrd->req_running;
1629                         if (active == -1) /* Aborted */
1630                                 continue;
1631
1632                         /* Detach the req */
1633                         descdone = thrd->req[active].desc;
1634                         thrd->req[active].desc = NULL;
1635
1636                         thrd->req_running = -1;
1637
1638                         /* Get going again ASAP */
1639                         _start(thrd);
1640
1641                         /* For now, just make a list of callbacks to be done */
1642                         list_add_tail(&descdone->rqd, &pl330->req_done);
1643                 }
1644         }
1645
1646         /* Now that we are in no hurry, do the callbacks */
1647         list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
1648                 list_del(&descdone->rqd);
1649                 spin_unlock_irqrestore(&pl330->lock, flags);
1650                 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1651                 spin_lock_irqsave(&pl330->lock, flags);
1652         }
1653
1654 updt_exit:
1655         spin_unlock_irqrestore(&pl330->lock, flags);
1656
1657         if (pl330->dmac_tbd.reset_dmac
1658                         || pl330->dmac_tbd.reset_mngr
1659                         || pl330->dmac_tbd.reset_chan) {
1660                 ret = 1;
1661                 tasklet_schedule(&pl330->tasks);
1662         }
1663
1664         return ret;
1665 }
1666
1667 /* Reserve an event */
1668 static inline int _alloc_event(struct pl330_thread *thrd)
1669 {
1670         struct pl330_dmac *pl330 = thrd->dmac;
1671         int ev;
1672
1673         for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1674                 if (pl330->events[ev] == -1) {
1675                         pl330->events[ev] = thrd->id;
1676                         return ev;
1677                 }
1678
1679         return -1;
1680 }
1681
1682 static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1683 {
1684         return pl330->pcfg.irq_ns & (1 << i);
1685 }
1686
1687 /* Upon success, returns IdentityToken for the
1688  * allocated channel, NULL otherwise.
1689  */
1690 static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1691 {
1692         struct pl330_thread *thrd = NULL;
1693         unsigned long flags;
1694         int chans, i;
1695
1696         if (pl330->state == DYING)
1697                 return NULL;
1698
1699         chans = pl330->pcfg.num_chan;
1700
1701         spin_lock_irqsave(&pl330->lock, flags);
1702
1703         for (i = 0; i < chans; i++) {
1704                 thrd = &pl330->channels[i];
1705                 if ((thrd->free) && (!_manager_ns(thrd) ||
1706                                         _chan_ns(pl330, i))) {
1707                         thrd->ev = _alloc_event(thrd);
1708                         if (thrd->ev >= 0) {
1709                                 thrd->free = false;
1710                                 thrd->lstenq = 1;
1711                                 thrd->req[0].desc = NULL;
1712                                 thrd->req[1].desc = NULL;
1713                                 thrd->req_running = -1;
1714                                 break;
1715                         }
1716                 }
1717                 thrd = NULL;
1718         }
1719
1720         spin_unlock_irqrestore(&pl330->lock, flags);
1721
1722         return thrd;
1723 }
1724
1725 /* Release an event */
1726 static inline void _free_event(struct pl330_thread *thrd, int ev)
1727 {
1728         struct pl330_dmac *pl330 = thrd->dmac;
1729
1730         /* If the event is valid and was held by the thread */
1731         if (ev >= 0 && ev < pl330->pcfg.num_events
1732                         && pl330->events[ev] == thrd->id)
1733                 pl330->events[ev] = -1;
1734 }
1735
1736 static void pl330_release_channel(struct pl330_thread *thrd)
1737 {
1738         struct pl330_dmac *pl330;
1739         unsigned long flags;
1740
1741         if (!thrd || thrd->free)
1742                 return;
1743
1744         _stop(thrd);
1745
1746         dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1747         dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1748
1749         pl330 = thrd->dmac;
1750
1751         spin_lock_irqsave(&pl330->lock, flags);
1752         _free_event(thrd, thrd->ev);
1753         thrd->free = true;
1754         spin_unlock_irqrestore(&pl330->lock, flags);
1755 }
1756
1757 /* Initialize the structure for PL330 configuration, that can be used
1758  * by the client driver the make best use of the DMAC
1759  */
1760 static void read_dmac_config(struct pl330_dmac *pl330)
1761 {
1762         void __iomem *regs = pl330->base;
1763         u32 val;
1764
1765         val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1766         val &= CRD_DATA_WIDTH_MASK;
1767         pl330->pcfg.data_bus_width = 8 * (1 << val);
1768
1769         val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1770         val &= CRD_DATA_BUFF_MASK;
1771         pl330->pcfg.data_buf_dep = val + 1;
1772
1773         val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1774         val &= CR0_NUM_CHANS_MASK;
1775         val += 1;
1776         pl330->pcfg.num_chan = val;
1777
1778         val = readl(regs + CR0);
1779         if (val & CR0_PERIPH_REQ_SET) {
1780                 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1781                 val += 1;
1782                 pl330->pcfg.num_peri = val;
1783                 pl330->pcfg.peri_ns = readl(regs + CR4);
1784         } else {
1785                 pl330->pcfg.num_peri = 0;
1786         }
1787
1788         val = readl(regs + CR0);
1789         if (val & CR0_BOOT_MAN_NS)
1790                 pl330->pcfg.mode |= DMAC_MODE_NS;
1791         else
1792                 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1793
1794         val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1795         val &= CR0_NUM_EVENTS_MASK;
1796         val += 1;
1797         pl330->pcfg.num_events = val;
1798
1799         pl330->pcfg.irq_ns = readl(regs + CR3);
1800 }
1801
1802 static inline void _reset_thread(struct pl330_thread *thrd)
1803 {
1804         struct pl330_dmac *pl330 = thrd->dmac;
1805
1806         thrd->req[0].mc_cpu = pl330->mcode_cpu
1807                                 + (thrd->id * pl330->mcbufsz);
1808         thrd->req[0].mc_bus = pl330->mcode_bus
1809                                 + (thrd->id * pl330->mcbufsz);
1810         thrd->req[0].desc = NULL;
1811
1812         thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1813                                 + pl330->mcbufsz / 2;
1814         thrd->req[1].mc_bus = thrd->req[0].mc_bus
1815                                 + pl330->mcbufsz / 2;
1816         thrd->req[1].desc = NULL;
1817
1818         thrd->req_running = -1;
1819 }
1820
1821 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1822 {
1823         int chans = pl330->pcfg.num_chan;
1824         struct pl330_thread *thrd;
1825         int i;
1826
1827         /* Allocate 1 Manager and 'chans' Channel threads */
1828         pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1829                                         GFP_KERNEL);
1830         if (!pl330->channels)
1831                 return -ENOMEM;
1832
1833         /* Init Channel threads */
1834         for (i = 0; i < chans; i++) {
1835                 thrd = &pl330->channels[i];
1836                 thrd->id = i;
1837                 thrd->dmac = pl330;
1838                 _reset_thread(thrd);
1839                 thrd->free = true;
1840         }
1841
1842         /* MANAGER is indexed at the end */
1843         thrd = &pl330->channels[chans];
1844         thrd->id = chans;
1845         thrd->dmac = pl330;
1846         thrd->free = false;
1847         pl330->manager = thrd;
1848
1849         return 0;
1850 }
1851
1852 static int dmac_alloc_resources(struct pl330_dmac *pl330)
1853 {
1854         int chans = pl330->pcfg.num_chan;
1855         int ret;
1856
1857         /*
1858          * Alloc MicroCode buffer for 'chans' Channel threads.
1859          * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1860          */
1861         pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
1862                                 chans * pl330->mcbufsz,
1863                                 &pl330->mcode_bus, GFP_KERNEL);
1864         if (!pl330->mcode_cpu) {
1865                 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1866                         __func__, __LINE__);
1867                 return -ENOMEM;
1868         }
1869
1870         ret = dmac_alloc_threads(pl330);
1871         if (ret) {
1872                 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1873                         __func__, __LINE__);
1874                 dma_free_coherent(pl330->ddma.dev,
1875                                 chans * pl330->mcbufsz,
1876                                 pl330->mcode_cpu, pl330->mcode_bus);
1877                 return ret;
1878         }
1879
1880         return 0;
1881 }
1882
1883 static int pl330_add(struct pl330_dmac *pl330)
1884 {
1885         void __iomem *regs;
1886         int i, ret;
1887
1888         regs = pl330->base;
1889
1890         /* Check if we can handle this DMAC */
1891         if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1892                 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1893                         pl330->pcfg.periph_id);
1894                 return -EINVAL;
1895         }
1896
1897         /* Read the configuration of the DMAC */
1898         read_dmac_config(pl330);
1899
1900         if (pl330->pcfg.num_events == 0) {
1901                 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1902                         __func__, __LINE__);
1903                 return -EINVAL;
1904         }
1905
1906         spin_lock_init(&pl330->lock);
1907
1908         INIT_LIST_HEAD(&pl330->req_done);
1909
1910         /* Use default MC buffer size if not provided */
1911         if (!pl330->mcbufsz)
1912                 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1913
1914         /* Mark all events as free */
1915         for (i = 0; i < pl330->pcfg.num_events; i++)
1916                 pl330->events[i] = -1;
1917
1918         /* Allocate resources needed by the DMAC */
1919         ret = dmac_alloc_resources(pl330);
1920         if (ret) {
1921                 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1922                 return ret;
1923         }
1924
1925         tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1926
1927         pl330->state = INIT;
1928
1929         return 0;
1930 }
1931
1932 static int dmac_free_threads(struct pl330_dmac *pl330)
1933 {
1934         struct pl330_thread *thrd;
1935         int i;
1936
1937         /* Release Channel threads */
1938         for (i = 0; i < pl330->pcfg.num_chan; i++) {
1939                 thrd = &pl330->channels[i];
1940                 pl330_release_channel(thrd);
1941         }
1942
1943         /* Free memory */
1944         kfree(pl330->channels);
1945
1946         return 0;
1947 }
1948
1949 static void pl330_del(struct pl330_dmac *pl330)
1950 {
1951         pl330->state = UNINIT;
1952
1953         tasklet_kill(&pl330->tasks);
1954
1955         /* Free DMAC resources */
1956         dmac_free_threads(pl330);
1957
1958         dma_free_coherent(pl330->ddma.dev,
1959                 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1960                 pl330->mcode_bus);
1961 }
1962
1963 /* forward declaration */
1964 static struct amba_driver pl330_driver;
1965
1966 static inline struct dma_pl330_chan *
1967 to_pchan(struct dma_chan *ch)
1968 {
1969         if (!ch)
1970                 return NULL;
1971
1972         return container_of(ch, struct dma_pl330_chan, chan);
1973 }
1974
1975 static inline struct dma_pl330_desc *
1976 to_desc(struct dma_async_tx_descriptor *tx)
1977 {
1978         return container_of(tx, struct dma_pl330_desc, txd);
1979 }
1980
1981 static inline void fill_queue(struct dma_pl330_chan *pch)
1982 {
1983         struct dma_pl330_desc *desc;
1984         int ret;
1985
1986         list_for_each_entry(desc, &pch->work_list, node) {
1987
1988                 /* If already submitted */
1989                 if (desc->status == BUSY)
1990                         continue;
1991
1992                 ret = pl330_submit_req(pch->thread, desc);
1993                 if (!ret) {
1994                         desc->status = BUSY;
1995                 } else if (ret == -EAGAIN) {
1996                         /* QFull or DMAC Dying */
1997                         break;
1998                 } else {
1999                         /* Unacceptable request */
2000                         desc->status = DONE;
2001                         dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2002                                         __func__, __LINE__, desc->txd.cookie);
2003                         tasklet_schedule(&pch->task);
2004                 }
2005         }
2006 }
2007
2008 static void pl330_tasklet(unsigned long data)
2009 {
2010         struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2011         struct dma_pl330_desc *desc, *_dt;
2012         unsigned long flags;
2013         bool power_down = false;
2014
2015         spin_lock_irqsave(&pch->lock, flags);
2016
2017         /* Pick up ripe tomatoes */
2018         list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2019                 if (desc->status == DONE) {
2020                         if (!pch->cyclic)
2021                                 dma_cookie_complete(&desc->txd);
2022                         list_move_tail(&desc->node, &pch->completed_list);
2023                 }
2024
2025         /* Try to submit a req imm. next to the last completed cookie */
2026         fill_queue(pch);
2027
2028         if (list_empty(&pch->work_list)) {
2029                 spin_lock(&pch->thread->dmac->lock);
2030                 _stop(pch->thread);
2031                 spin_unlock(&pch->thread->dmac->lock);
2032                 power_down = true;
2033         } else {
2034                 /* Make sure the PL330 Channel thread is active */
2035                 spin_lock(&pch->thread->dmac->lock);
2036                 _start(pch->thread);
2037                 spin_unlock(&pch->thread->dmac->lock);
2038         }
2039
2040         while (!list_empty(&pch->completed_list)) {
2041                 dma_async_tx_callback callback;
2042                 void *callback_param;
2043
2044                 desc = list_first_entry(&pch->completed_list,
2045                                         struct dma_pl330_desc, node);
2046
2047                 callback = desc->txd.callback;
2048                 callback_param = desc->txd.callback_param;
2049
2050                 if (pch->cyclic) {
2051                         desc->status = PREP;
2052                         list_move_tail(&desc->node, &pch->work_list);
2053                         if (power_down) {
2054                                 spin_lock(&pch->thread->dmac->lock);
2055                                 _start(pch->thread);
2056                                 spin_unlock(&pch->thread->dmac->lock);
2057                                 power_down = false;
2058                         }
2059                 } else {
2060                         desc->status = FREE;
2061                         list_move_tail(&desc->node, &pch->dmac->desc_pool);
2062                 }
2063
2064                 dma_descriptor_unmap(&desc->txd);
2065
2066                 if (callback) {
2067                         spin_unlock_irqrestore(&pch->lock, flags);
2068                         callback(callback_param);
2069                         spin_lock_irqsave(&pch->lock, flags);
2070                 }
2071         }
2072         spin_unlock_irqrestore(&pch->lock, flags);
2073
2074         /* If work list empty, power down */
2075         if (power_down) {
2076                 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2077                 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2078         }
2079 }
2080
2081 bool pl330_filter(struct dma_chan *chan, void *param)
2082 {
2083         u8 *peri_id;
2084
2085         if (chan->device->dev->driver != &pl330_driver.drv)
2086                 return false;
2087
2088         peri_id = chan->private;
2089         return *peri_id == (unsigned long)param;
2090 }
2091 EXPORT_SYMBOL(pl330_filter);
2092
2093 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2094                                                 struct of_dma *ofdma)
2095 {
2096         int count = dma_spec->args_count;
2097         struct pl330_dmac *pl330 = ofdma->of_dma_data;
2098         unsigned int chan_id;
2099
2100         if (!pl330)
2101                 return NULL;
2102
2103         if (count != 1)
2104                 return NULL;
2105
2106         chan_id = dma_spec->args[0];
2107         if (chan_id >= pl330->num_peripherals)
2108                 return NULL;
2109
2110         return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2111 }
2112
2113 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2114 {
2115         struct dma_pl330_chan *pch = to_pchan(chan);
2116         struct pl330_dmac *pl330 = pch->dmac;
2117         unsigned long flags;
2118
2119         spin_lock_irqsave(&pch->lock, flags);
2120
2121         dma_cookie_init(chan);
2122         pch->cyclic = false;
2123
2124         pch->thread = pl330_request_channel(pl330);
2125         if (!pch->thread) {
2126                 spin_unlock_irqrestore(&pch->lock, flags);
2127                 return -ENOMEM;
2128         }
2129
2130         tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2131
2132         spin_unlock_irqrestore(&pch->lock, flags);
2133
2134         return 1;
2135 }
2136
2137 static int pl330_config(struct dma_chan *chan,
2138                         struct dma_slave_config *slave_config)
2139 {
2140         struct dma_pl330_chan *pch = to_pchan(chan);
2141
2142         if (slave_config->direction == DMA_MEM_TO_DEV) {
2143                 if (slave_config->dst_addr)
2144                         pch->fifo_addr = slave_config->dst_addr;
2145                 if (slave_config->dst_addr_width)
2146                         pch->burst_sz = __ffs(slave_config->dst_addr_width);
2147                 if (slave_config->dst_maxburst)
2148                         pch->burst_len = slave_config->dst_maxburst;
2149         } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2150                 if (slave_config->src_addr)
2151                         pch->fifo_addr = slave_config->src_addr;
2152                 if (slave_config->src_addr_width)
2153                         pch->burst_sz = __ffs(slave_config->src_addr_width);
2154                 if (slave_config->src_maxburst)
2155                         pch->burst_len = slave_config->src_maxburst;
2156         }
2157
2158         return 0;
2159 }
2160
2161 static int pl330_terminate_all(struct dma_chan *chan)
2162 {
2163         struct dma_pl330_chan *pch = to_pchan(chan);
2164         struct dma_pl330_desc *desc;
2165         unsigned long flags;
2166         struct pl330_dmac *pl330 = pch->dmac;
2167         LIST_HEAD(list);
2168
2169         pm_runtime_get_sync(pl330->ddma.dev);
2170         spin_lock_irqsave(&pch->lock, flags);
2171         spin_lock(&pl330->lock);
2172         _stop(pch->thread);
2173         spin_unlock(&pl330->lock);
2174
2175         pch->thread->req[0].desc = NULL;
2176         pch->thread->req[1].desc = NULL;
2177         pch->thread->req_running = -1;
2178
2179         /* Mark all desc done */
2180         list_for_each_entry(desc, &pch->submitted_list, node) {
2181                 desc->status = FREE;
2182                 dma_cookie_complete(&desc->txd);
2183         }
2184
2185         list_for_each_entry(desc, &pch->work_list , node) {
2186                 desc->status = FREE;
2187                 dma_cookie_complete(&desc->txd);
2188         }
2189
2190         list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2191         list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2192         list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2193         spin_unlock_irqrestore(&pch->lock, flags);
2194         pm_runtime_mark_last_busy(pl330->ddma.dev);
2195         pm_runtime_put_autosuspend(pl330->ddma.dev);
2196
2197         return 0;
2198 }
2199
2200 /*
2201  * We don't support DMA_RESUME command because of hardware
2202  * limitations, so after pausing the channel we cannot restore
2203  * it to active state. We have to terminate channel and setup
2204  * DMA transfer again. This pause feature was implemented to
2205  * allow safely read residue before channel termination.
2206  */
2207 static int pl330_pause(struct dma_chan *chan)
2208 {
2209         struct dma_pl330_chan *pch = to_pchan(chan);
2210         struct pl330_dmac *pl330 = pch->dmac;
2211         unsigned long flags;
2212
2213         pm_runtime_get_sync(pl330->ddma.dev);
2214         spin_lock_irqsave(&pch->lock, flags);
2215
2216         spin_lock(&pl330->lock);
2217         _stop(pch->thread);
2218         spin_unlock(&pl330->lock);
2219
2220         spin_unlock_irqrestore(&pch->lock, flags);
2221         pm_runtime_mark_last_busy(pl330->ddma.dev);
2222         pm_runtime_put_autosuspend(pl330->ddma.dev);
2223
2224         return 0;
2225 }
2226
2227 static void pl330_free_chan_resources(struct dma_chan *chan)
2228 {
2229         struct dma_pl330_chan *pch = to_pchan(chan);
2230         unsigned long flags;
2231
2232         tasklet_kill(&pch->task);
2233
2234         pm_runtime_get_sync(pch->dmac->ddma.dev);
2235         spin_lock_irqsave(&pch->lock, flags);
2236
2237         pl330_release_channel(pch->thread);
2238         pch->thread = NULL;
2239
2240         if (pch->cyclic)
2241                 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2242
2243         spin_unlock_irqrestore(&pch->lock, flags);
2244         pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2245         pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2246 }
2247
2248 static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2249                                            struct dma_pl330_desc *desc)
2250 {
2251         struct pl330_thread *thrd = pch->thread;
2252         struct pl330_dmac *pl330 = pch->dmac;
2253         void __iomem *regs = thrd->dmac->base;
2254         u32 val, addr;
2255
2256         pm_runtime_get_sync(pl330->ddma.dev);
2257         val = addr = 0;
2258         if (desc->rqcfg.src_inc) {
2259                 val = readl(regs + SA(thrd->id));
2260                 addr = desc->px.src_addr;
2261         } else {
2262                 val = readl(regs + DA(thrd->id));
2263                 addr = desc->px.dst_addr;
2264         }
2265         pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2266         pm_runtime_put_autosuspend(pl330->ddma.dev);
2267         return val - addr;
2268 }
2269
2270 static enum dma_status
2271 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2272                  struct dma_tx_state *txstate)
2273 {
2274         enum dma_status ret;
2275         unsigned long flags;
2276         struct dma_pl330_desc *desc, *running = NULL;
2277         struct dma_pl330_chan *pch = to_pchan(chan);
2278         unsigned int transferred, residual = 0;
2279
2280         ret = dma_cookie_status(chan, cookie, txstate);
2281
2282         if (!txstate)
2283                 return ret;
2284
2285         if (ret == DMA_COMPLETE)
2286                 goto out;
2287
2288         spin_lock_irqsave(&pch->lock, flags);
2289
2290         if (pch->thread->req_running != -1)
2291                 running = pch->thread->req[pch->thread->req_running].desc;
2292
2293         /* Check in pending list */
2294         list_for_each_entry(desc, &pch->work_list, node) {
2295                 if (desc->status == DONE)
2296                         transferred = desc->bytes_requested;
2297                 else if (running && desc == running)
2298                         transferred =
2299                                 pl330_get_current_xferred_count(pch, desc);
2300                 else
2301                         transferred = 0;
2302                 residual += desc->bytes_requested - transferred;
2303                 if (desc->txd.cookie == cookie) {
2304                         switch (desc->status) {
2305                         case DONE:
2306                                 ret = DMA_COMPLETE;
2307                                 break;
2308                         case PREP:
2309                         case BUSY:
2310                                 ret = DMA_IN_PROGRESS;
2311                                 break;
2312                         default:
2313                                 WARN_ON(1);
2314                         }
2315                         break;
2316                 }
2317                 if (desc->last)
2318                         residual = 0;
2319         }
2320         spin_unlock_irqrestore(&pch->lock, flags);
2321
2322 out:
2323         dma_set_residue(txstate, residual);
2324
2325         return ret;
2326 }
2327
2328 static void pl330_issue_pending(struct dma_chan *chan)
2329 {
2330         struct dma_pl330_chan *pch = to_pchan(chan);
2331         unsigned long flags;
2332
2333         spin_lock_irqsave(&pch->lock, flags);
2334         if (list_empty(&pch->work_list)) {
2335                 /*
2336                  * Warn on nothing pending. Empty submitted_list may
2337                  * break our pm_runtime usage counter as it is
2338                  * updated on work_list emptiness status.
2339                  */
2340                 WARN_ON(list_empty(&pch->submitted_list));
2341                 pm_runtime_get_sync(pch->dmac->ddma.dev);
2342         }
2343         list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2344         spin_unlock_irqrestore(&pch->lock, flags);
2345
2346         pl330_tasklet((unsigned long)pch);
2347 }
2348
2349 /*
2350  * We returned the last one of the circular list of descriptor(s)
2351  * from prep_xxx, so the argument to submit corresponds to the last
2352  * descriptor of the list.
2353  */
2354 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2355 {
2356         struct dma_pl330_desc *desc, *last = to_desc(tx);
2357         struct dma_pl330_chan *pch = to_pchan(tx->chan);
2358         dma_cookie_t cookie;
2359         unsigned long flags;
2360
2361         spin_lock_irqsave(&pch->lock, flags);
2362
2363         /* Assign cookies to all nodes */
2364         while (!list_empty(&last->node)) {
2365                 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2366                 if (pch->cyclic) {
2367                         desc->txd.callback = last->txd.callback;
2368                         desc->txd.callback_param = last->txd.callback_param;
2369                 }
2370                 desc->last = false;
2371
2372                 dma_cookie_assign(&desc->txd);
2373
2374                 list_move_tail(&desc->node, &pch->submitted_list);
2375         }
2376
2377         last->last = true;
2378         cookie = dma_cookie_assign(&last->txd);
2379         list_add_tail(&last->node, &pch->submitted_list);
2380         spin_unlock_irqrestore(&pch->lock, flags);
2381
2382         return cookie;
2383 }
2384
2385 static inline void _init_desc(struct dma_pl330_desc *desc)
2386 {
2387         desc->rqcfg.swap = SWAP_NO;
2388         desc->rqcfg.scctl = CCTRL0;
2389         desc->rqcfg.dcctl = CCTRL0;
2390         desc->txd.tx_submit = pl330_tx_submit;
2391
2392         INIT_LIST_HEAD(&desc->node);
2393 }
2394
2395 /* Returns the number of descriptors added to the DMAC pool */
2396 static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
2397 {
2398         struct dma_pl330_desc *desc;
2399         unsigned long flags;
2400         int i;
2401
2402         desc = kcalloc(count, sizeof(*desc), flg);
2403         if (!desc)
2404                 return 0;
2405
2406         spin_lock_irqsave(&pl330->pool_lock, flags);
2407
2408         for (i = 0; i < count; i++) {
2409                 _init_desc(&desc[i]);
2410                 list_add_tail(&desc[i].node, &pl330->desc_pool);
2411         }
2412
2413         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2414
2415         return count;
2416 }
2417
2418 static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
2419 {
2420         struct dma_pl330_desc *desc = NULL;
2421         unsigned long flags;
2422
2423         spin_lock_irqsave(&pl330->pool_lock, flags);
2424
2425         if (!list_empty(&pl330->desc_pool)) {
2426                 desc = list_entry(pl330->desc_pool.next,
2427                                 struct dma_pl330_desc, node);
2428
2429                 list_del_init(&desc->node);
2430
2431                 desc->status = PREP;
2432                 desc->txd.callback = NULL;
2433         }
2434
2435         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2436
2437         return desc;
2438 }
2439
2440 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2441 {
2442         struct pl330_dmac *pl330 = pch->dmac;
2443         u8 *peri_id = pch->chan.private;
2444         struct dma_pl330_desc *desc;
2445
2446         /* Pluck one desc from the pool of DMAC */
2447         desc = pluck_desc(pl330);
2448
2449         /* If the DMAC pool is empty, alloc new */
2450         if (!desc) {
2451                 if (!add_desc(pl330, GFP_ATOMIC, 1))
2452                         return NULL;
2453
2454                 /* Try again */
2455                 desc = pluck_desc(pl330);
2456                 if (!desc) {
2457                         dev_err(pch->dmac->ddma.dev,
2458                                 "%s:%d ALERT!\n", __func__, __LINE__);
2459                         return NULL;
2460                 }
2461         }
2462
2463         /* Initialize the descriptor */
2464         desc->pchan = pch;
2465         desc->txd.cookie = 0;
2466         async_tx_ack(&desc->txd);
2467
2468         desc->peri = peri_id ? pch->chan.chan_id : 0;
2469         desc->rqcfg.pcfg = &pch->dmac->pcfg;
2470
2471         dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2472
2473         return desc;
2474 }
2475
2476 static inline void fill_px(struct pl330_xfer *px,
2477                 dma_addr_t dst, dma_addr_t src, size_t len)
2478 {
2479         px->bytes = len;
2480         px->dst_addr = dst;
2481         px->src_addr = src;
2482 }
2483
2484 static struct dma_pl330_desc *
2485 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2486                 dma_addr_t src, size_t len)
2487 {
2488         struct dma_pl330_desc *desc = pl330_get_desc(pch);
2489
2490         if (!desc) {
2491                 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2492                         __func__, __LINE__);
2493                 return NULL;
2494         }
2495
2496         /*
2497          * Ideally we should lookout for reqs bigger than
2498          * those that can be programmed with 256 bytes of
2499          * MC buffer, but considering a req size is seldom
2500          * going to be word-unaligned and more than 200MB,
2501          * we take it easy.
2502          * Also, should the limit is reached we'd rather
2503          * have the platform increase MC buffer size than
2504          * complicating this API driver.
2505          */
2506         fill_px(&desc->px, dst, src, len);
2507
2508         return desc;
2509 }
2510
2511 /* Call after fixing burst size */
2512 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2513 {
2514         struct dma_pl330_chan *pch = desc->pchan;
2515         struct pl330_dmac *pl330 = pch->dmac;
2516         int burst_len;
2517
2518         burst_len = pl330->pcfg.data_bus_width / 8;
2519         burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2520         burst_len >>= desc->rqcfg.brst_size;
2521
2522         /* src/dst_burst_len can't be more than 16 */
2523         if (burst_len > 16)
2524                 burst_len = 16;
2525
2526         while (burst_len > 1) {
2527                 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2528                         break;
2529                 burst_len--;
2530         }
2531
2532         return burst_len;
2533 }
2534
2535 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2536                 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2537                 size_t period_len, enum dma_transfer_direction direction,
2538                 unsigned long flags)
2539 {
2540         struct dma_pl330_desc *desc = NULL, *first = NULL;
2541         struct dma_pl330_chan *pch = to_pchan(chan);
2542         struct pl330_dmac *pl330 = pch->dmac;
2543         unsigned int i;
2544         dma_addr_t dst;
2545         dma_addr_t src;
2546
2547         if (len % period_len != 0)
2548                 return NULL;
2549
2550         if (!is_slave_direction(direction)) {
2551                 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2552                 __func__, __LINE__);
2553                 return NULL;
2554         }
2555
2556         for (i = 0; i < len / period_len; i++) {
2557                 desc = pl330_get_desc(pch);
2558                 if (!desc) {
2559                         dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2560                                 __func__, __LINE__);
2561
2562                         if (!first)
2563                                 return NULL;
2564
2565                         spin_lock_irqsave(&pl330->pool_lock, flags);
2566
2567                         while (!list_empty(&first->node)) {
2568                                 desc = list_entry(first->node.next,
2569                                                 struct dma_pl330_desc, node);
2570                                 list_move_tail(&desc->node, &pl330->desc_pool);
2571                         }
2572
2573                         list_move_tail(&first->node, &pl330->desc_pool);
2574
2575                         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2576
2577                         return NULL;
2578                 }
2579
2580                 switch (direction) {
2581                 case DMA_MEM_TO_DEV:
2582                         desc->rqcfg.src_inc = 1;
2583                         desc->rqcfg.dst_inc = 0;
2584                         src = dma_addr;
2585                         dst = pch->fifo_addr;
2586                         break;
2587                 case DMA_DEV_TO_MEM:
2588                         desc->rqcfg.src_inc = 0;
2589                         desc->rqcfg.dst_inc = 1;
2590                         src = pch->fifo_addr;
2591                         dst = dma_addr;
2592                         break;
2593                 default:
2594                         break;
2595                 }
2596
2597                 desc->rqtype = direction;
2598                 desc->rqcfg.brst_size = pch->burst_sz;
2599                 desc->rqcfg.brst_len = 1;
2600                 desc->bytes_requested = period_len;
2601                 fill_px(&desc->px, dst, src, period_len);
2602
2603                 if (!first)
2604                         first = desc;
2605                 else
2606                         list_add_tail(&desc->node, &first->node);
2607
2608                 dma_addr += period_len;
2609         }
2610
2611         if (!desc)
2612                 return NULL;
2613
2614         pch->cyclic = true;
2615         desc->txd.flags = flags;
2616
2617         return &desc->txd;
2618 }
2619
2620 static struct dma_async_tx_descriptor *
2621 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2622                 dma_addr_t src, size_t len, unsigned long flags)
2623 {
2624         struct dma_pl330_desc *desc;
2625         struct dma_pl330_chan *pch = to_pchan(chan);
2626         struct pl330_dmac *pl330;
2627         int burst;
2628
2629         if (unlikely(!pch || !len))
2630                 return NULL;
2631
2632         pl330 = pch->dmac;
2633
2634         desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2635         if (!desc)
2636                 return NULL;
2637
2638         desc->rqcfg.src_inc = 1;
2639         desc->rqcfg.dst_inc = 1;
2640         desc->rqtype = DMA_MEM_TO_MEM;
2641
2642         /* Select max possible burst size */
2643         burst = pl330->pcfg.data_bus_width / 8;
2644
2645         /*
2646          * Make sure we use a burst size that aligns with all the memcpy
2647          * parameters because our DMA programming algorithm doesn't cope with
2648          * transfers which straddle an entry in the DMA device's MFIFO.
2649          */
2650         while ((src | dst | len) & (burst - 1))
2651                 burst /= 2;
2652
2653         desc->rqcfg.brst_size = 0;
2654         while (burst != (1 << desc->rqcfg.brst_size))
2655                 desc->rqcfg.brst_size++;
2656
2657         /*
2658          * If burst size is smaller than bus width then make sure we only
2659          * transfer one at a time to avoid a burst stradling an MFIFO entry.
2660          */
2661         if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2662                 desc->rqcfg.brst_len = 1;
2663
2664         desc->rqcfg.brst_len = get_burst_len(desc, len);
2665         desc->bytes_requested = len;
2666
2667         desc->txd.flags = flags;
2668
2669         return &desc->txd;
2670 }
2671
2672 static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2673                                   struct dma_pl330_desc *first)
2674 {
2675         unsigned long flags;
2676         struct dma_pl330_desc *desc;
2677
2678         if (!first)
2679                 return;
2680
2681         spin_lock_irqsave(&pl330->pool_lock, flags);
2682
2683         while (!list_empty(&first->node)) {
2684                 desc = list_entry(first->node.next,
2685                                 struct dma_pl330_desc, node);
2686                 list_move_tail(&desc->node, &pl330->desc_pool);
2687         }
2688
2689         list_move_tail(&first->node, &pl330->desc_pool);
2690
2691         spin_unlock_irqrestore(&pl330->pool_lock, flags);
2692 }
2693
2694 static struct dma_async_tx_descriptor *
2695 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2696                 unsigned int sg_len, enum dma_transfer_direction direction,
2697                 unsigned long flg, void *context)
2698 {
2699         struct dma_pl330_desc *first, *desc = NULL;
2700         struct dma_pl330_chan *pch = to_pchan(chan);
2701         struct scatterlist *sg;
2702         int i;
2703         dma_addr_t addr;
2704
2705         if (unlikely(!pch || !sgl || !sg_len))
2706                 return NULL;
2707
2708         addr = pch->fifo_addr;
2709
2710         first = NULL;
2711
2712         for_each_sg(sgl, sg, sg_len, i) {
2713
2714                 desc = pl330_get_desc(pch);
2715                 if (!desc) {
2716                         struct pl330_dmac *pl330 = pch->dmac;
2717
2718                         dev_err(pch->dmac->ddma.dev,
2719                                 "%s:%d Unable to fetch desc\n",
2720                                 __func__, __LINE__);
2721                         __pl330_giveback_desc(pl330, first);
2722
2723                         return NULL;
2724                 }
2725
2726                 if (!first)
2727                         first = desc;
2728                 else
2729                         list_add_tail(&desc->node, &first->node);
2730
2731                 if (direction == DMA_MEM_TO_DEV) {
2732                         desc->rqcfg.src_inc = 1;
2733                         desc->rqcfg.dst_inc = 0;
2734                         fill_px(&desc->px,
2735                                 addr, sg_dma_address(sg), sg_dma_len(sg));
2736                 } else {
2737                         desc->rqcfg.src_inc = 0;
2738                         desc->rqcfg.dst_inc = 1;
2739                         fill_px(&desc->px,
2740                                 sg_dma_address(sg), addr, sg_dma_len(sg));
2741                 }
2742
2743                 desc->rqcfg.brst_size = pch->burst_sz;
2744                 desc->rqcfg.brst_len = 1;
2745                 desc->rqtype = direction;
2746                 desc->bytes_requested = sg_dma_len(sg);
2747         }
2748
2749         /* Return the last desc in the chain */
2750         desc->txd.flags = flg;
2751         return &desc->txd;
2752 }
2753
2754 static irqreturn_t pl330_irq_handler(int irq, void *data)
2755 {
2756         if (pl330_update(data))
2757                 return IRQ_HANDLED;
2758         else
2759                 return IRQ_NONE;
2760 }
2761
2762 #define PL330_DMA_BUSWIDTHS \
2763         BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2764         BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2765         BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2766         BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2767         BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2768
2769 /*
2770  * Runtime PM callbacks are provided by amba/bus.c driver.
2771  *
2772  * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2773  * bus driver will only disable/enable the clock in runtime PM callbacks.
2774  */
2775 static int __maybe_unused pl330_suspend(struct device *dev)
2776 {
2777         struct amba_device *pcdev = to_amba_device(dev);
2778
2779         pm_runtime_disable(dev);
2780
2781         if (!pm_runtime_status_suspended(dev)) {
2782                 /* amba did not disable the clock */
2783                 amba_pclk_disable(pcdev);
2784         }
2785         amba_pclk_unprepare(pcdev);
2786
2787         return 0;
2788 }
2789
2790 static int __maybe_unused pl330_resume(struct device *dev)
2791 {
2792         struct amba_device *pcdev = to_amba_device(dev);
2793         int ret;
2794
2795         ret = amba_pclk_prepare(pcdev);
2796         if (ret)
2797                 return ret;
2798
2799         if (!pm_runtime_status_suspended(dev))
2800                 ret = amba_pclk_enable(pcdev);
2801
2802         pm_runtime_enable(dev);
2803
2804         return ret;
2805 }
2806
2807 static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2808
2809 static int
2810 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2811 {
2812         struct dma_pl330_platdata *pdat;
2813         struct pl330_config *pcfg;
2814         struct pl330_dmac *pl330;
2815         struct dma_pl330_chan *pch, *_p;
2816         struct dma_device *pd;
2817         struct resource *res;
2818         int i, ret, irq;
2819         int num_chan;
2820         struct device_node *np = adev->dev.of_node;
2821
2822         pdat = dev_get_platdata(&adev->dev);
2823
2824         ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2825         if (ret)
2826                 return ret;
2827
2828         /* Allocate a new DMAC and its Channels */
2829         pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2830         if (!pl330) {
2831                 dev_err(&adev->dev, "unable to allocate mem\n");
2832                 return -ENOMEM;
2833         }
2834
2835         pd = &pl330->ddma;
2836         pd->dev = &adev->dev;
2837
2838         pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2839
2840         /* get quirk */
2841         for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2842                 if (of_property_read_bool(np, of_quirks[i].quirk))
2843                         pl330->quirks |= of_quirks[i].id;
2844
2845         res = &adev->res;
2846         pl330->base = devm_ioremap_resource(&adev->dev, res);
2847         if (IS_ERR(pl330->base))
2848                 return PTR_ERR(pl330->base);
2849
2850         amba_set_drvdata(adev, pl330);
2851
2852         for (i = 0; i < AMBA_NR_IRQS; i++) {
2853                 irq = adev->irq[i];
2854                 if (irq) {
2855                         ret = devm_request_irq(&adev->dev, irq,
2856                                                pl330_irq_handler, 0,
2857                                                dev_name(&adev->dev), pl330);
2858                         if (ret)
2859                                 return ret;
2860                 } else {
2861                         break;
2862                 }
2863         }
2864
2865         pcfg = &pl330->pcfg;
2866
2867         pcfg->periph_id = adev->periphid;
2868         ret = pl330_add(pl330);
2869         if (ret)
2870                 return ret;
2871
2872         INIT_LIST_HEAD(&pl330->desc_pool);
2873         spin_lock_init(&pl330->pool_lock);
2874
2875         /* Create a descriptor pool of default size */
2876         if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
2877                 dev_warn(&adev->dev, "unable to allocate desc\n");
2878
2879         INIT_LIST_HEAD(&pd->channels);
2880
2881         /* Initialize channel parameters */
2882         if (pdat)
2883                 num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
2884         else
2885                 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2886
2887         pl330->num_peripherals = num_chan;
2888
2889         pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2890         if (!pl330->peripherals) {
2891                 ret = -ENOMEM;
2892                 dev_err(&adev->dev, "unable to allocate pl330->peripherals\n");
2893                 goto probe_err2;
2894         }
2895
2896         for (i = 0; i < num_chan; i++) {
2897                 pch = &pl330->peripherals[i];
2898                 if (!adev->dev.of_node)
2899                         pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2900                 else
2901                         pch->chan.private = adev->dev.of_node;
2902
2903                 INIT_LIST_HEAD(&pch->submitted_list);
2904                 INIT_LIST_HEAD(&pch->work_list);
2905                 INIT_LIST_HEAD(&pch->completed_list);
2906                 spin_lock_init(&pch->lock);
2907                 pch->thread = NULL;
2908                 pch->chan.device = pd;
2909                 pch->dmac = pl330;
2910
2911                 /* Add the channel to the DMAC list */
2912                 list_add_tail(&pch->chan.device_node, &pd->channels);
2913         }
2914
2915         if (pdat) {
2916                 pd->cap_mask = pdat->cap_mask;
2917         } else {
2918                 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2919                 if (pcfg->num_peri) {
2920                         dma_cap_set(DMA_SLAVE, pd->cap_mask);
2921                         dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2922                         dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2923                 }
2924         }
2925
2926         pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2927         pd->device_free_chan_resources = pl330_free_chan_resources;
2928         pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2929         pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2930         pd->device_tx_status = pl330_tx_status;
2931         pd->device_prep_slave_sg = pl330_prep_slave_sg;
2932         pd->device_config = pl330_config;
2933         pd->device_pause = pl330_pause;
2934         pd->device_terminate_all = pl330_terminate_all;
2935         pd->device_issue_pending = pl330_issue_pending;
2936         pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
2937         pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
2938         pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2939         pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
2940
2941         ret = dma_async_device_register(pd);
2942         if (ret) {
2943                 dev_err(&adev->dev, "unable to register DMAC\n");
2944                 goto probe_err3;
2945         }
2946
2947         if (adev->dev.of_node) {
2948                 ret = of_dma_controller_register(adev->dev.of_node,
2949                                          of_dma_pl330_xlate, pl330);
2950                 if (ret) {
2951                         dev_err(&adev->dev,
2952                         "unable to register DMA to the generic DT DMA helpers\n");
2953                 }
2954         }
2955
2956         adev->dev.dma_parms = &pl330->dma_parms;
2957
2958         /*
2959          * This is the limit for transfers with a buswidth of 1, larger
2960          * buswidths will have larger limits.
2961          */
2962         ret = dma_set_max_seg_size(&adev->dev, 1900800);
2963         if (ret)
2964                 dev_err(&adev->dev, "unable to set the seg size\n");
2965
2966
2967         dev_info(&adev->dev,
2968                 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
2969         dev_info(&adev->dev,
2970                 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2971                 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
2972                 pcfg->num_peri, pcfg->num_events);
2973
2974         pm_runtime_irq_safe(&adev->dev);
2975         pm_runtime_use_autosuspend(&adev->dev);
2976         pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
2977         pm_runtime_mark_last_busy(&adev->dev);
2978         pm_runtime_put_autosuspend(&adev->dev);
2979
2980         return 0;
2981 probe_err3:
2982         /* Idle the DMAC */
2983         list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
2984                         chan.device_node) {
2985
2986                 /* Remove the channel */
2987                 list_del(&pch->chan.device_node);
2988
2989                 /* Flush the channel */
2990                 if (pch->thread) {
2991                         pl330_terminate_all(&pch->chan);
2992                         pl330_free_chan_resources(&pch->chan);
2993                 }
2994         }
2995 probe_err2:
2996         pl330_del(pl330);
2997
2998         return ret;
2999 }
3000
3001 static int pl330_remove(struct amba_device *adev)
3002 {
3003         struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3004         struct dma_pl330_chan *pch, *_p;
3005
3006         pm_runtime_get_noresume(pl330->ddma.dev);
3007
3008         if (adev->dev.of_node)
3009                 of_dma_controller_free(adev->dev.of_node);
3010
3011         dma_async_device_unregister(&pl330->ddma);
3012
3013         /* Idle the DMAC */
3014         list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3015                         chan.device_node) {
3016
3017                 /* Remove the channel */
3018                 list_del(&pch->chan.device_node);
3019
3020                 /* Flush the channel */
3021                 if (pch->thread) {
3022                         pl330_terminate_all(&pch->chan);
3023                         pl330_free_chan_resources(&pch->chan);
3024                 }
3025         }
3026
3027         pl330_del(pl330);
3028
3029         return 0;
3030 }
3031
3032 static struct amba_id pl330_ids[] = {
3033         {
3034                 .id     = 0x00041330,
3035                 .mask   = 0x000fffff,
3036         },
3037         { 0, 0 },
3038 };
3039
3040 MODULE_DEVICE_TABLE(amba, pl330_ids);
3041
3042 static struct amba_driver pl330_driver = {
3043         .drv = {
3044                 .owner = THIS_MODULE,
3045                 .name = "dma-pl330",
3046                 .pm = &pl330_pm,
3047         },
3048         .id_table = pl330_ids,
3049         .probe = pl330_probe,
3050         .remove = pl330_remove,
3051 };
3052
3053 module_amba_driver(pl330_driver);
3054
3055 MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3056 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3057 MODULE_LICENSE("GPL");