2 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
45 #include "rk3399.dtsi"
46 #include "rk3399-android-next.dtsi"
47 #include "rk3399-opp.dtsi"
48 #include <dt-bindings/sensor-dev.h>
49 #include <dt-bindings/pwm/pwm.h>
52 compatible = "rockchip,rk3399-mid", "rockchip,rk3399";
54 edp_panel: edp-panel {
55 compatible = "lg,lp079qx1-sp0v", "panel-simple";
56 backlight = <&backlight>;
57 power-supply = <&vcc3v3_s0>;
58 enable-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
60 panel_in_edp: endpoint {
61 remote-endpoint = <&edp_out_panel>;
66 hall_sensor: hall-mh248 {
67 compatible = "hall-mh248";
68 pinctrl-names = "default";
69 pinctrl-0 = <&mh248_irq_gpio>;
70 irq-gpio = <&gpio1 2 IRQ_TYPE_EDGE_BOTH>;
76 compatible = "regulator-fixed";
77 regulator-name = "vcc_sys";
80 regulator-min-microvolt = <3900000>;
81 regulator-max-microvolt = <3900000>;
84 vcc3v3_sys: vcc3v3-sys {
85 compatible = "regulator-fixed";
86 regulator-name = "vcc3v3_sys";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
93 vcc5v0_host: vcc5v0-host-regulator {
94 compatible = "regulator-fixed";
96 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
97 pinctrl-names = "default";
98 pinctrl-0 = <&host_vbus_drv>;
99 regulator-name = "vcc5v0_host";
103 compatible = "pwm-regulator";
104 pwms = <&pwm2 0 25000 0>;
105 rockchip,pwm_id= <2>;
106 rockchip,pwm_voltage = <900000>;
107 regulator-name = "vdd_log";
108 regulator-min-microvolt = <750000>;
109 regulator-max-microvolt = <1350000>;
114 backlight: backlight {
115 compatible = "pwm-backlight";
116 pwms = <&pwm0 0 25000 PWM_POLARITY_INVERTED>;
117 brightness-levels = <
118 0 1 51 52 52 53 53 54
119 54 55 55 56 56 57 57 58
120 58 59 59 60 61 61 62 63
121 63 64 65 65 66 67 67 68
122 69 69 70 71 71 72 73 73
123 74 75 75 76 77 77 78 79
124 79 80 80 81 81 82 83 83
125 84 85 86 86 87 88 89 89
126 90 91 92 92 93 94 95 95
127 96 97 98 98 99 100 101 101
128 102 103 104 104 105 106 107 107
129 108 109 110 110 111 112 113 113
130 114 115 116 116 117 118 119 119
131 120 121 122 122 123 124 125 125
132 126 127 128 128 129 130 131 131
133 132 133 134 134 135 136 137 137
134 138 139 140 140 141 142 143 143
135 144 145 146 146 147 148 149 149
136 150 151 152 152 153 154 155 155
137 156 157 158 158 159 160 161 161
138 162 163 164 164 165 166 167 167
139 168 169 170 170 171 172 173 173
140 174 175 176 176 177 178 179 179
141 180 181 182 182 183 184 185 185
142 186 187 188 188 189 190 191 191
143 216 217 218 218 219 220 221 221
144 222 223 224 224 225 226 227 227
145 228 229 230 230 231 232 233 233
146 234 235 236 236 237 238 239 239
147 240 241 242 242 243 244 245 245
148 246 247 248 248 249 250 251 251
149 252 253 254 254 255 255 255 255>;
150 default-brightness-level = <200>;
151 enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
154 vcc_phy: vcc-phy-regulator {
155 compatible = "regulator-fixed";
156 regulator-name = "vcc_phy";
162 compatible = "rockchip,rk3399-io-voltage-domain";
163 rockchip,grf = <&grf>;
165 bt656-supply = <&vcc1v8_dvp>;
166 audio-supply = <&vcca1v8_codec>;
167 sdmmc-supply = <&vcc_sd>;
168 gpio1830-supply = <&vcc_3v0>;
172 compatible = "rockchip,rk3399-pmu-io-voltage-domain";
173 rockchip,grf = <&pmugrf>;
175 pmu1830-supply = <&vcc_1v8>;
179 compatible = "simple-audio-card";
180 simple-audio-card,format = "i2s";
181 simple-audio-card,name = "rockchip,es8316-codec";
182 simple-audio-card,mclk-fs = <256>;
183 simple-audio-card,widgets =
184 "Microphone", "Mic Jack",
185 "Headphone", "Headphone Jack";
186 simple-audio-card,routing =
187 "Mic Jack", "MICBIAS1",
189 "Headphone Jack", "HPOL",
190 "Headphone Jack", "HPOR";
191 simple-audio-card,cpu {
194 simple-audio-card,codec {
195 sound-dai = <&es8316>;
200 compatible = "simple-audio-card";
201 simple-audio-card,name = "rockchip,spdif";
202 simple-audio-card,cpu {
203 sound-dai = <&spdif>;
205 simple-audio-card,codec {
206 sound-dai = <&spdif_out>;
210 spdif_out: spdif-out {
211 compatible = "linux,spdif-dit";
212 #sound-dai-cells = <0>;
215 sdio_pwrseq: sdio-pwrseq {
216 compatible = "mmc-pwrseq-simple";
218 clock-names = "ext_clock";
219 pinctrl-names = "default";
220 pinctrl-0 = <&wifi_enable_h>;
223 * On the module itself this is one of these (depending
224 * on the actual card populated):
225 * - SDIO_RESET_L_WL_REG_ON
226 * - PDN (power down when low)
228 reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
232 compatible = "wlan-platdata";
233 rockchip,grf = <&grf>;
234 wifi_chip_type = "ap6354";
236 WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
241 compatible = "bluetooth-platdata";
243 clock-names = "ext_clock";
244 //wifi-bt-power-toggle;
245 uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
246 pinctrl-names = "default", "rts_gpio";
247 pinctrl-0 = <&uart0_rts>;
248 pinctrl-1 = <&uart0_gpios>;
249 //BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
250 BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
251 BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
252 BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
257 compatible = "rockchip,uboot-charge";
258 rockchip,uboot-charge-on = <0>;
259 rockchip,android-charge-on = <1>;
263 compatible = "rk-vibrator-gpio";
264 vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>;
269 compatible = "rockchip_headset";
270 headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&hp_det>;
273 io-channels = <&saradc 2>;
278 compatible = "rockchip,key";
281 io-channels = <&saradc 1>;
286 rockchip,adc_value = <1>;
291 label = "volume down";
292 rockchip,adc_value = <170>;
296 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
305 rockchip,adc_value = <746>;
311 rockchip,adc_value = <355>;
317 rockchip,adc_value = <560>;
323 rockchip,adc_value = <450>;
328 clock-frequency = <50000000>;
329 clock-freq-min-max = <400000 150000000>;
337 vqmmc-supply = <&vcc_sd>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
344 clock-frequency = <150000000>;
345 clock-freq-min-max = <200000 150000000>;
351 keep-power-in-suspend;
352 mmc-pwrseq = <&sdio_pwrseq>;
355 pinctrl-names = "default";
356 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
370 keep-power-in-suspend;
371 mmc-hs400-enhanced-strobe;
377 rockchip,i2s-broken-burst-len;
378 rockchip,playback-channels = <8>;
379 rockchip,capture-channels = <8>;
380 #sound-dai-cells = <0>;
384 #sound-dai-cells = <0>;
389 #sound-dai-cells = <0>;
394 i2c-scl-rising-time-ns = <180>;
395 i2c-scl-falling-time-ns = <30>;
396 clock-frequency = <400000>;
398 vdd_cpu_b: syr837@40 {
399 compatible = "silergy,syr827";
401 vin-supply = <&vcc_sys>;
402 regulator-compatible = "fan53555-reg";
403 pinctrl-0 = <&vsel1_gpio>;
404 vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
405 regulator-name = "vdd_cpu_b";
406 regulator-min-microvolt = <712500>;
407 regulator-max-microvolt = <1500000>;
408 regulator-ramp-delay = <1000>;
409 fcs,suspend-voltage-selector = <1>;
411 regulator-initial-state = <3>;
412 regulator-state-mem {
413 regulator-off-in-suspend;
418 compatible = "silergy,syr828";
421 vin-supply = <&vcc_sys>;
422 regulator-compatible = "fan53555-reg";
423 pinctrl-0 = <&vsel2_gpio>;
424 vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
425 regulator-name = "vdd_gpu";
426 regulator-min-microvolt = <735000>;
427 regulator-max-microvolt = <1400000>;
428 regulator-ramp-delay = <1000>;
429 fcs,suspend-voltage-selector = <1>;
431 regulator-state-mem {
432 regulator-off-in-suspend;
437 compatible = "rockchip,rk818";
440 clock-output-names = "xin32k", "wifibt_32kin";
441 interrupt-parent = <&gpio1>;
442 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
443 pinctrl-names = "default";
444 pinctrl-0 = <&pmic_int_l>;
445 rockchip,system-power-controller;
446 rk818,support_dc_chg = <1>;/*1: dc chg; 0:usb chg*/
451 vcc1-supply = <&vcc_sys>;
452 vcc2-supply = <&vcc_sys>;
453 vcc3-supply = <&vcc_sys>;
454 vcc4-supply = <&vcc_sys>;
455 vcc6-supply = <&vcc_sys>;
456 vcc7-supply = <&vcc3v3_sys>;
457 vcc8-supply = <&vcc_sys>;
458 vcc9-supply = <&vcc3v3_sys>;
461 vdd_cpu_l: DCDC_REG1 {
462 regulator-name = "vdd_cpu_l";
465 regulator-min-microvolt = <750000>;
466 regulator-max-microvolt = <1350000>;
467 regulator-ramp-delay = <6001>;
468 regulator-state-mem {
469 regulator-off-in-suspend;
473 vdd_center: DCDC_REG2 {
474 regulator-name = "vdd_center";
477 regulator-min-microvolt = <800000>;
478 regulator-max-microvolt = <1350000>;
479 regulator-ramp-delay = <6001>;
480 regulator-state-mem {
481 regulator-off-in-suspend;
486 regulator-name = "vcc_ddr";
489 regulator-state-mem {
490 regulator-on-in-suspend;
495 regulator-name = "vcc_1v8";
498 regulator-min-microvolt = <1800000>;
499 regulator-max-microvolt = <1800000>;
500 regulator-state-mem {
501 regulator-on-in-suspend;
502 regulator-suspend-microvolt = <1800000>;
506 vcca3v0_codec: LDO_REG1 {
509 regulator-min-microvolt = <3000000>;
510 regulator-max-microvolt = <3000000>;
511 regulator-name = "vcca3v0_codec";
512 regulator-state-mem {
513 regulator-off-in-suspend;
517 vcc3v0_tp: LDO_REG2 {
520 regulator-min-microvolt = <3000000>;
521 regulator-max-microvolt = <3000000>;
522 regulator-name = "vcc3v0_tp";
523 regulator-state-mem {
524 regulator-off-in-suspend;
528 vcca1v8_codec: LDO_REG3 {
531 regulator-min-microvolt = <1800000>;
532 regulator-max-microvolt = <1800000>;
533 regulator-name = "vcca1v8_codec";
534 regulator-state-mem {
535 regulator-off-in-suspend;
539 vcc_power_on: LDO_REG4 {
542 regulator-min-microvolt = <3300000>;
543 regulator-max-microvolt = <3300000>;
544 regulator-name = "vcc_power_on";
545 regulator-state-mem {
546 regulator-on-in-suspend;
547 regulator-suspend-microvolt = <3300000>;
554 regulator-min-microvolt = <3000000>;
555 regulator-max-microvolt = <3000000>;
556 regulator-name = "vcc_3v0";
557 regulator-state-mem {
558 regulator-on-in-suspend;
559 regulator-suspend-microvolt = <3000000>;
566 regulator-min-microvolt = <1500000>;
567 regulator-max-microvolt = <1500000>;
568 regulator-name = "vcc_1v5";
569 regulator-state-mem {
570 regulator-on-in-suspend;
571 regulator-suspend-microvolt = <1500000>;
575 vcc1v8_dvp: LDO_REG7 {
578 regulator-min-microvolt = <1800000>;
579 regulator-max-microvolt = <1800000>;
580 regulator-name = "vcc1v8_dvp";
581 regulator-state-mem {
582 regulator-off-in-suspend;
586 vcc3v3_s3: LDO_REG8 {
589 regulator-min-microvolt = <3300000>;
590 regulator-max-microvolt = <3300000>;
591 regulator-name = "vcc3v3_s3";
592 regulator-state-mem {
593 regulator-off-in-suspend;
600 regulator-min-microvolt = <1800000>;
601 regulator-max-microvolt = <3300000>;
602 regulator-name = "vcc_sd";
603 regulator-state-mem {
604 regulator-on-in-suspend;
605 regulator-suspend-microvolt = <3300000>;
609 vcc3v3_s0: SWITCH_REG {
612 regulator-name = "vcc3v3_s0";
613 regulator-state-mem {
614 regulator-on-in-suspend;
620 compatible = "rk818-battery";
621 ocv_table = <3400 3675 3689 3716 3740 3756 3768 3780
622 3793 3807 3827 3853 3896 3937 3974 4007 4066
623 4110 4161 4217 4308>;
624 design_capacity = <7916>;
625 design_qmax = <8708>;
627 max_input_current = <3000>;
628 max_chrg_current = <3000>;
629 max_chrg_voltage = <4350>;
630 sleep_enter_current = <300>;
631 sleep_exit_current = <300>;
632 power_off_thresd = <3400>;
633 zero_algorithm_vol = <3950>;
634 fb_temperature = <105>;
636 max_soc_offset = <60>;
647 i2c-scl-rising-time-ns = <140>;
648 i2c-scl-falling-time-ns = <30>;
651 #sound-dai-cells = <0>;
652 compatible = "everest,es8316";
654 clocks = <&cru SCLK_I2S_8CH_OUT>;
655 clock-names = "mclk";
656 spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
662 i2c-scl-rising-time-ns = <345>;
663 i2c-scl-falling-time-ns = <11>;
664 clock-frequency = <400000>;
668 compatible = "lsm330_acc";
669 pinctrl-names = "default";
670 pinctrl-0 = <&lsm330a_irq_gpio>;
672 irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
673 type = <SENSOR_TYPE_ACCEL>;
675 poll_delay_ms = <30>;
676 power-off-in-suspend = <1>;
682 compatible = "lsm330_gyro";
683 pinctrl-names = "default";
684 pinctrl-0 = <&lsm330g_irq_gpio>;
686 irq-gpio = <&gpio1 20 IRQ_TYPE_EDGE_RISING>;
687 type = <SENSOR_TYPE_GYROSCOPE>;
689 power-off-in-suspend = <1>;
690 poll_delay_ms = <30>;
695 compatible = "invensense,mpu6500";
696 pinctrl-names = "default";
697 pinctrl-0 = <&mpu6500_irq_gpio>;
699 irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
700 mpu-int_config = <0x10>;
701 mpu-level_shifter = <0>;
702 mpu-orientation = <1 0 0 0 1 0 0 0 1>;
706 support-hw-poweroff = <1>;
712 compatible = "ak8963";
713 pinctrl-names = "default";
714 pinctrl-0 = <&ak8963_irq_gpio>;
716 type = <SENSOR_TYPE_COMPASS>;
717 irq-gpio = <&gpio2 28 IRQ_TYPE_EDGE_RISING>;
719 poll_delay_ms = <30>;
725 compatible = "capella,light_cm3218";
726 pinctrl-names = "default";
727 pinctrl-0 = <&cm3218_irq_gpio>;
729 type = <SENSOR_TYPE_LIGHT>;
730 irq-gpio = <&gpio4 24 IRQ_TYPE_EDGE_FALLING>;
732 poll_delay_ms = <30>;
736 compatible = "fairchild,fusb302";
738 pinctrl-names = "default";
739 pinctrl-0 = <&fusb0_int>;
740 int-n-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
747 i2c-scl-rising-time-ns = <150>;
748 i2c-scl-falling-time-ns = <30>;
749 clock-frequency = <400000>;
752 compatible = "goodix,gt9xx";
754 touch-gpio = <&gpio3 12 IRQ_TYPE_LEVEL_LOW>;
755 reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
759 tp-supply = <&vcc3v0_tp>;
764 cpu-supply = <&vdd_cpu_l>;
768 cpu-supply = <&vdd_cpu_l>;
772 cpu-supply = <&vdd_cpu_l>;
776 cpu-supply = <&vdd_cpu_l>;
780 cpu-supply = <&vdd_cpu_b>;
784 cpu-supply = <&vdd_cpu_b>;
789 mali-supply = <&vdd_gpu>;
798 max-freq = <50000000>;
801 compatible = "inv-spi,mpu6500";
802 pinctrl-names = "default";
803 pinctrl-0 = <&mpu6500_irq_gpio>;
804 irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>;
806 spi-max-frequency = <1000000>;
809 mpu-int_config = <0x00>;
810 mpu-level_shifter = <0>;
811 mpu-orientation = <1 0 0 0 1 0 0 0 1>;
815 support-hw-poweroff = <1>;
826 rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
827 rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
835 u2phy0_otg: otg-port {
839 u2phy0_host: host-port {
840 phy-supply = <&vcc5v0_host>;
846 pinctrl-names = "default";
847 pinctrl-0 = <&uart0_xfer &uart0_cts>;
886 wifi_enable_h: wifi-enable-h {
887 rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
892 uart0_gpios: uart0-gpios {
893 rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
898 pmic_int_l: pmic-int-l {
900 <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
903 pmic_dvs2: pmic-dvs2 {
905 <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
907 vsel1_gpio: vsel1-gpio {
909 <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
911 vsel2_gpio: vsel2-gpio {
913 <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
918 mh248_irq_gpio: mh248-irq-gpio {
919 rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
925 rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>;
930 lsm330a_irq_gpio: lsm330a-irq-gpio {
931 rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
936 lsm330g_irq_gpio: lsm330g-irq-gpio {
937 rockchip,pins = <1 20 RK_FUNC_GPIO &pcfg_pull_none>;
942 mpu6500_irq_gpio: mpu6500-irq-gpio {
943 rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
948 ak8963_irq_gpio: ak8963-irq-gpio {
949 rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
954 cm3218_irq_gpio: cm3218-irq-gpio {
955 rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_up>;
960 host_vbus_drv: host-vbus-drv {
962 <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
967 fusb0_int: fusb0-int {
969 <1 1 RK_FUNC_GPIO &pcfg_pull_up>;
979 #address-cells = <1>;
981 edp_out_panel: endpoint@0 {
983 remote-endpoint = <&panel_in_edp>;