arch/arm/boot/dts/ste-href.dtsi

   1 /*
   2  * Copyright 2012 ST-Ericsson AB
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include "ste-dbx5x0.dtsi"
  14 #include "ste-href-family-pinctrl.dtsi"
  15
  16 / {
  17         memory {
  18                 reg = <0x00000000 0x20000000>;
  19         };
  20
  21         soc {
  22                 usb_per5@a03e0000 {
  23                         pinctrl-names = "default", "sleep";
  24                         pinctrl-0 = <&musb_default_mode>;
  25                         pinctrl-1 = <&musb_sleep_mode>;
  26                 };
  27
  28                 uart@80120000 {
  29                         pinctrl-names = "default", "sleep";
  30                         pinctrl-0 = <&uart0_default_mode>;
  31                         pinctrl-1 = <&uart0_sleep_mode>;
  32                         status = "okay";
  33                 };
  34
  35                 /* This UART is unused and thus left disabled */
  36                 uart@80121000 {
  37                         pinctrl-names = "default", "sleep";
  38                         pinctrl-0 = <&uart1_default_mode>;
  39                         pinctrl-1 = <&uart1_sleep_mode>;
  40                 };
  41
  42                 uart@80007000 {
  43                         pinctrl-names = "default", "sleep";
  44                         pinctrl-0 = <&uart2_default_mode>;
  45                         pinctrl-1 = <&uart2_sleep_mode>;
  46                         status = "okay";
  47                 };
  48
  49                 i2c@80004000 {
  50                         pinctrl-names = "default","sleep";
  51                         pinctrl-0 = <&i2c0_default_mode>;
  52                         pinctrl-1 = <&i2c0_sleep_mode>;
  53                 };
  54
  55                 i2c@80122000 {
  56                         pinctrl-names = "default","sleep";
  57                         pinctrl-0 = <&i2c1_default_mode>;
  58                         pinctrl-1 = <&i2c1_sleep_mode>;
  59                 };
  60
  61                 i2c@80128000 {
  62                         pinctrl-names = "default","sleep";
  63                         pinctrl-0 = <&i2c2_default_mode>;
  64                         pinctrl-1 = <&i2c2_sleep_mode>;
  65                         lp5521@33 {
  66                                 compatible = "national,lp5521";
  67                                 reg = <0x33>;
  68                                 label = "lp5521_pri";
  69                                 clock-mode = /bits/ 8 <2>;
  70                                 chan0 {
  71                                         led-cur = /bits/ 8 <0x2f>;
  72                                         max-cur = /bits/ 8 <0x5f>;
  73                                         linux,default-trigger = "heartbeat";
  74                                 };
  75                                 chan1 {
  76                                         led-cur = /bits/ 8 <0x2f>;
  77                                         max-cur = /bits/ 8 <0x5f>;
  78                                 };
  79                                 chan2 {
  80                                         led-cur = /bits/ 8 <0x2f>;
  81                                         max-cur = /bits/ 8 <0x5f>;
  82                                 };
  83                         };
  84                         lp5521@34 {
  85                                 compatible = "national,lp5521";
  86                                 reg = <0x34>;
  87                                 label = "lp5521_sec";
  88                                 clock-mode = /bits/ 8 <2>;
  89                                 chan0 {
  90                                         led-cur = /bits/ 8 <0x2f>;
  91                                         max-cur = /bits/ 8 <0x5f>;
  92                                 };
  93                                 chan1 {
  94                                         led-cur = /bits/ 8 <0x2f>;
  95                                         max-cur = /bits/ 8 <0x5f>;
  96                                 };
  97                                 chan2 {
  98                                         led-cur = /bits/ 8 <0x2f>;
  99                                         max-cur = /bits/ 8 <0x5f>;
 100                                 };
 101                         };
 102                         bh1780@29 {
 103                                 compatible = "rohm,bh1780gli";
 104                                 reg = <0x29>;
 105                         };
 106                 };
 107
 108                 i2c@80110000 {
 109                         pinctrl-names = "default","sleep";
 110                         pinctrl-0 = <&i2c3_default_mode>;
 111                         pinctrl-1 = <&i2c3_sleep_mode>;
 112                 };
 113
 114                 vmmci: regulator-gpio {
 115                         compatible = "regulator-gpio";
 116
 117                         regulator-min-microvolt = <1800000>;
 118                         regulator-max-microvolt = <2900000>;
 119                         regulator-name = "mmci-reg";
 120                         regulator-type = "voltage";
 121
 122                         startup-delay-us = <100>;
 123                         enable-active-high;
 124
 125                         states = <1800000 0x1
 126                                   2900000 0x0>;
 127                 };
 128
 129                 // External Micro SD slot
 130                 sdi0_per1@80126000 {
 131                         arm,primecell-periphid = <0x10480180>;
 132                         max-frequency = <100000000>;
 133                         bus-width = <4>;
 134                         cap-sd-highspeed;
 135                         cap-mmc-highspeed;
 136                         sd-uhs-sdr12;
 137                         sd-uhs-sdr25;
 138                         full-pwr-cycle;
 139                         st,sig-dir-dat0;
 140                         st,sig-dir-dat2;
 141                         st,sig-dir-cmd;
 142                         st,sig-pin-fbclk;
 143                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 144                         vqmmc-supply = <&vmmci>;
 145                         pinctrl-names = "default", "sleep";
 146                         pinctrl-0 = <&sdi0_default_mode>;
 147                         pinctrl-1 = <&sdi0_sleep_mode>;
 148
 149                         status = "okay";
 150                 };
 151
 152                 // WLAN SDIO channel
 153                 sdi1_per2@80118000 {
 154                         arm,primecell-periphid = <0x10480180>;
 155                         max-frequency = <100000000>;
 156                         bus-width = <4>;
 157                         non-removable;
 158                         pinctrl-names = "default", "sleep";
 159                         pinctrl-0 = <&sdi1_default_mode>;
 160                         pinctrl-1 = <&sdi1_sleep_mode>;
 161
 162                         status = "okay";
 163                 };
 164
 165                 // PoP:ed eMMC
 166                 sdi2_per3@80005000 {
 167                         arm,primecell-periphid = <0x10480180>;
 168                         max-frequency = <100000000>;
 169                         bus-width = <8>;
 170                         cap-mmc-highspeed;
 171                         non-removable;
 172                         vmmc-supply = <&db8500_vsmps2_reg>;
 173                         pinctrl-names = "default", "sleep";
 174                         pinctrl-0 = <&sdi2_default_mode>;
 175                         pinctrl-1 = <&sdi2_sleep_mode>;
 176
 177                         status = "okay";
 178                 };
 179
 180                 // On-board eMMC
 181                 sdi4_per2@80114000 {
 182                         arm,primecell-periphid = <0x10480180>;
 183                         max-frequency = <100000000>;
 184                         bus-width = <8>;
 185                         cap-mmc-highspeed;
 186                         non-removable;
 187                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 188                         pinctrl-names = "default", "sleep";
 189                         pinctrl-0 = <&sdi4_default_mode>;
 190                         pinctrl-1 = <&sdi4_sleep_mode>;
 191
 192                         status = "okay";
 193                 };
 194
 195                 sound {
 196                         compatible = "stericsson,snd-soc-mop500";
 197
 198                         stericsson,cpu-dai = <&msp1 &msp3>;
 199                         stericsson,audio-codec = <&codec>;
 200                 };
 201
 202                 msp0: msp@80123000 {
 203                         pinctrl-names = "default";
 204                         pinctrl-0 = <&msp0_default_mode>;
 205                         status = "okay";
 206                 };
 207
 208                 msp1: msp@80124000 {
 209                         pinctrl-names = "default";
 210                         pinctrl-0 = <&msp1_default_mode>;
 211                         status = "okay";
 212                 };
 213
 214                 msp2: msp@80117000 {
 215                         pinctrl-names = "default";
 216                         pinctrl-0 = <&msp2_default_mode>;
 217                 };
 218
 219                 msp3: msp@80125000 {
 220                         status = "okay";
 221                 };
 222
 223                 prcmu@80157000 {
 224                         ab8500 {
 225                                 ab8500-gpio {
 226                                         compatible = "stericsson,ab8500-gpio";
 227                                 };
 228
 229                                 ab8500-regulators {
 230                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 231                                                 regulator-name = "V-DISPLAY";
 232                                         };
 233
 234                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 235                                                 regulator-name = "V-eMMC1";
 236                                         };
 237
 238                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 239                                                 regulator-name = "V-MMC-SD";
 240                                         };
 241
 242                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 243                                                 regulator-name = "V-INTCORE";
 244                                         };
 245
 246                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 247                                                 regulator-name = "V-TVOUT";
 248                                         };
 249
 250                                         ab8500_ldo_usb_reg: ab8500_ldo_usb {
 251                                                 regulator-name = "dummy";
 252                                         };
 253
 254                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 255                                                 regulator-name = "V-AUD";
 256                                         };
 257
 258                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 259                                                 regulator-name = "V-AMIC1";
 260                                         };
 261
 262                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 263                                                 regulator-name = "V-AMIC2";
 264                                         };
 265
 266                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 267                                                 regulator-name = "V-DMIC";
 268                                         };
 269
 270                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 271                                                 regulator-name = "V-CSI/DSI";
 272                                         };
 273                                 };
 274                         };
 275                 };
 276
 277                 mcde@a0350000 {
 278                         pinctrl-names = "default", "sleep";
 279                         pinctrl-0 = <&lcd_default_mode>;
 280                         pinctrl-1 = <&lcd_sleep_mode>;
 281                 };
 282         };
 283 };