From 9ff16f0833806b6b59aaf0cc158fa6e42f24d7e4 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 25 Jan 2013 14:04:07 +0800 Subject: [PATCH] mtd: gpmi: set the Golois Field bit for mx6q's BCH The GF13 can be only used in the following case: The ECC data chunk is less then 1K bytes. In mx23/mx28, the ecc data chunk is 512 bytes. So it is okay. But in mx6q, we begin to use some large nand chip whose ecc data chunk maybe 1K bytes long. So when the data chunk is 1K bytes, we have to use the GF14. This patch sets the Golois Field bit when the GF14 is needed. Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/gpmi-nand/bch-regs.h | 20 ++++++++++++++++++++ drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 4 ++++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 ++++-- 3 files changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h index d67bca5174bc..588f5374047c 100644 --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h @@ -61,6 +61,16 @@ & BM_BCH_FLASH0LAYOUT0_ECC0) \ ) +#define MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14 10 +#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \ + (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) +#define BF_BCH_FLASH0LAYOUT0_GF(v, x) \ + ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \ + & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \ + : 0 \ + ) + #define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0 #define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE) @@ -93,6 +103,16 @@ & BM_BCH_FLASH0LAYOUT1_ECCN) \ ) +#define MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14 10 +#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \ + (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) +#define BF_BCH_FLASH0LAYOUT1_GF(v, x) \ + ((GPMI_IS_MX6Q(x) && ((v) == 14)) \ + ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \ + & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \ + : 0 \ + ) + #define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0 #define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 01cc570e98aa..4f8857fa48a7 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -237,6 +237,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) unsigned int metadata_size; unsigned int ecc_strength; unsigned int page_size; + unsigned int gf_len; int ret; if (common_nfc_set_geometry(this)) @@ -247,6 +248,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) metadata_size = bch_geo->metadata_size; ecc_strength = bch_geo->ecc_strength >> 1; page_size = bch_geo->page_size; + gf_len = bch_geo->gf_len; ret = gpmi_enable_clk(this); if (ret) @@ -268,11 +270,13 @@ int bch_set_geometry(struct gpmi_nand_data *this) writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count) | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size) | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) + | BF_BCH_FLASH0LAYOUT0_GF(gf_len, this) | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this), r->bch_regs + HW_BCH_FLASH0LAYOUT0); writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) + | BF_BCH_FLASH0LAYOUT1_GF(gf_len, this) | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this), r->bch_regs + HW_BCH_FLASH0LAYOUT1); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 38c8b8bfc428..25216785f180 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -112,10 +112,12 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this) /* The default for the length of Galois Field. */ geo->gf_len = 13; - /* The default for chunk size. There is no oobsize greater then 512. */ + /* The default for chunk size. */ geo->ecc_chunk_size = 512; - while (geo->ecc_chunk_size < mtd->oobsize) + while (geo->ecc_chunk_size < mtd->oobsize) { geo->ecc_chunk_size *= 2; /* keep C >= O */ + geo->gf_len = 14; + } geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size; -- 2.34.1