From 43fef47f94a1ae46fb2720dada32fa3b5547bee2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 13 May 2014 18:34:09 -0700 Subject: [PATCH] mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle Some oscillators can be turned off during off-idle saving few a little bit power at the cost of the oscillator start up latency. If you board can do this, you can now enable it by using the ti,twl4030-power-idle-osc-off compatible flag. Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/twl4030-power.txt | 6 ++++++ drivers/mfd/twl4030-power.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index bbd66039202a..b9ee7b98d3e2 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -9,6 +9,7 @@ Required properties: "ti,twl4030-power" "ti,twl4030-power-reset" "ti,twl4030-power-idle" + "ti,twl4030-power-idle-osc-off" The use of ti,twl4030-power-reset is recommended at least on 3530 that needs a special configuration for warm reset to work. @@ -16,6 +17,11 @@ The use of ti,twl4030-power-reset is recommended at least on When using ti,twl4030-power-idle, the TI recommended configuration for idle modes is loaded to the tlw4030 PMIC. +When using ti,twl4030-power-idle-osc-off, the TI recommended +configuration is used with the external oscillator being shut +down during off-idle. Note that this does not work on all boards +depending on how the external oscillator is wired. + Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the system poweroffs. diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 4846c7b48ebb..3bc969a5916b 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -761,6 +761,19 @@ static struct twl4030_power_data omap3_idle = { .resource_config = omap3_idle_rconfig, }; +/* Disable 32 KiHz oscillator during idle */ +static struct twl4030_resconfig osc_off_rconfig[] = { + TWL_REMAP_OFF(RES_CLKEN, DEV_GRP_P1 | DEV_GRP_P3, 3, 2), + { /* Terminator */ }, +}; + +static struct twl4030_power_data osc_off_idle = { + .scripts = omap3_idle_scripts, + .num = ARRAY_SIZE(omap3_idle_scripts), + .resource_config = omap3_idle_rconfig, + .board_config = osc_off_rconfig, +}; + static struct of_device_id twl4030_power_of_match[] = { { .compatible = "ti,twl4030-power-reset", @@ -770,6 +783,10 @@ static struct of_device_id twl4030_power_of_match[] = { .compatible = "ti,twl4030-power-idle", .data = &omap3_idle, }, + { + .compatible = "ti,twl4030-power-idle-osc-off", + .data = &osc_off_idle, + }, { }, }; MODULE_DEVICE_TABLE(of, twl4030_power_of_match); -- 2.34.1