From 0d8e2d0dad98a693bad88aea6876ac8b94ad95c6 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 24 Nov 2010 16:49:05 -0700 Subject: [PATCH] OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled The console semaphore must be held while the OMAP UART devices are disabled, lest a console write cause an ARM abort (and a kernel crash) when the underlying console device is inaccessible. These crashes only occur when the console is on one of the OMAP internal serial ports. While this problem has been latent in the PM idle loop for some time, the crash was not triggerable with an unmodified kernel until commit 6f251e9db1093c187addc309b5f2f7fe3efd2995 ("OMAP: UART: omap_device conversions, remove implicit 8520 assumptions"). After this patch, a console write often occurs after the console UART has been disabled in the idle loop, crashing the system. Several users have encountered this bug: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg38396.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36602.html The same commit also introduced new code that disabled the UARTs during init, in omap_serial_init_port(). The kernel will also crash in this code when earlyconsole and extra debugging is enabled: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36411.html The minimal fix for the -rc series is to hold the console semaphore while the OMAP UARTs are disabled. This is a somewhat overbroad fix, since the console may not be located on an OMAP UART, as is the case with the GPMC UART on Zoom3. While it is technically possible to determine which devices the console or earlyconsole is actually running on, it is not a trivial problem to solve, and the code to do so is not really appropriate for the -rc series. The right long-term fix is to ensure that no code outside of the OMAP serial driver can disable an OMAP UART. As I understand it, code to implement this is under development by TI. This patch is a collaboration between Paul Walmsley and Tony Lindgren . Thanks to Ming Lei and Pramod for their feedback on earlier versions of this patch. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Acked-by: Kevin Hilman Cc: Ming Lei Cc: Pramod Cc: Thomas Petazzoni Cc: Jean Pihet Cc: Govindraj.R --- arch/arm/mach-omap2/pm24xx.c | 7 +++++++ arch/arm/mach-omap2/pm34xx.c | 10 ++++++++++ arch/arm/mach-omap2/serial.c | 5 +++++ 3 files changed, 22 insertions(+) diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a40457d81927..c85923e56b85 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; + /* Block console output in case it is on one of the OMAP UARTs */ + if (try_acquire_console_sem()) + goto no_sleep; + omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); omap_uart_prepare_idle(2); @@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); + release_console_sem(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 75c0cd13ad8e..0ec8a04b7473 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -385,6 +386,12 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } + /* Block console output in case it is on one of the OMAP UARTs */ + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); @@ -463,6 +470,9 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } + release_console_sem(); + +console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index bc934dbe3bf0..d17960a1be25 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef CONFIG_SERIAL_OMAP #include @@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port) oh->dev_attr = uart; + acquire_console_sem(); /* in case the earlycon is on the UART */ + /* * Because of early UART probing, UART did not get idled * on init. Now that omap_device is ready, ensure full idle @@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; + release_console_sem(); + if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { device_init_wakeup(&od->pdev.dev, true); -- 2.34.1