宋秀杰 [Wed, 18 Aug 2010 12:57:42 +0000 (05:57 -0700)]
move tca6424_reset_itr from tca6424.c to board-infosdk.c,this is used in i2c-rk2818 for extgpio interrupt
lyx [Wed, 18 Aug 2010 05:35:49 +0000 (22:35 -0700)]
checkout infosdk board
lyx [Wed, 18 Aug 2010 03:55:38 +0000 (20:55 -0700)]
add camera for infosdk and modify lcd for infosdk and rahosdk
宋秀杰 [Wed, 18 Aug 2010 03:15:37 +0000 (20:15 -0700)]
在信息机中添加了扩展IO的全局配置,修改init的加载方式,采用subsys_initcall的方式
ChenJQ [Wed, 18 Aug 2010 01:29:50 +0000 (18:29 -0700)]
Chang wm8994 i2c3 to i2c0 in board of info.
lyx [Tue, 17 Aug 2010 12:23:56 +0000 (05:23 -0700)]
fpga config && gsensor for infosdk && spi touch screen for infosdk
root [Tue, 17 Aug 2010 07:32:02 +0000 (00:32 -0700)]
添加tca6424的代码,需要注意的是由于此芯片中断响应必须在I2C的读完成之后操作SDA和SCL脚,在i2c-rk2818.c中添加了一个函数。如果有影响其他器件的工作,请提出。使用之前需要make menuconfig先配置中断引脚数和支持的中断数,都为24,并配置扩展IOtca6424。
cym [Tue, 17 Aug 2010 02:59:00 +0000 (10:59 +0800)]
add CONFIG_RK2818_REGULATOR_LP8725=y to rk2818_raho_defconfig
root [Tue, 17 Aug 2010 02:01:28 +0000 (10:01 +0800)]
add i2c0 irq mode
root [Tue, 17 Aug 2010 01:58:52 +0000 (09:58 +0800)]
add i2c irq mode
root [Mon, 16 Aug 2010 10:53:23 +0000 (18:53 +0800)]
adapt all kind of board
kfx [Fri, 13 Aug 2010 09:43:18 +0000 (17:43 +0800)]
add i2c mode to board_raho.c
kfx [Fri, 13 Aug 2010 00:37:48 +0000 (08:37 +0800)]
modify i2c
黄涛 [Mon, 16 Aug 2010 07:34:59 +0000 (15:34 +0800)]
Revert "’增加了扩展IOtca6424的驱动,目前中断方式还在测试,尚不可用,暂时屏蔽了FPGA的GPIO接口‘"
This reverts commit
03fe5e9f063a6ffc3cb49b79b184df53c1d25424.
黄涛 [Mon, 16 Aug 2010 07:27:42 +0000 (15:27 +0800)]
使用subsys_initcall初始化spi/fpga,保证在其它设备初始化之前fpga可用
root [Mon, 16 Aug 2010 07:07:31 +0000 (00:07 -0700)]
’增加了扩展IOtca6424的驱动,目前中断方式还在测试,尚不可用,暂时屏蔽了FPGA的GPIO接口‘
黄涛 [Fri, 13 Aug 2010 06:08:50 +0000 (14:08 +0800)]
dma: 调用spin_lock_init,正确初始化dma的lock
cym [Thu, 12 Aug 2010 11:18:52 +0000 (19:18 +0800)]
modified PMU_LP8725 delete set buck1(core) voltage
root [Thu, 12 Aug 2010 03:24:29 +0000 (11:24 +0800)]
Merge branch 'develop' of lbt@10.10.10.201:/home/rockchip/rk2818/kernel into develop
root [Thu, 12 Aug 2010 03:22:56 +0000 (11:22 +0800)]
add compile flags for board dependent gpio setting
cym [Thu, 12 Aug 2010 02:16:26 +0000 (10:16 +0800)]
modified PMU_LP8725 LDO5(AVDD18) Initial voltage 1.2v->1.8V
root [Thu, 12 Aug 2010 01:22:38 +0000 (09:22 +0800)]
Merge branch 'develop' of lbt@10.10.10.201:/home/rockchip/rk2818/kernel into develop
root [Thu, 12 Aug 2010 01:10:31 +0000 (09:10 +0800)]
remove compile warnings
ddl [Wed, 11 Aug 2010 13:11:19 +0000 (21:11 +0800)]
fb support rotate for camera
黄涛 [Wed, 11 Aug 2010 11:48:41 +0000 (19:48 +0800)]
rk2818-sdmmc: fix bad spin_lock_irqsave call
黄涛 [Wed, 11 Aug 2010 11:25:48 +0000 (19:25 +0800)]
dwc_otg: 添加缺失的SPIN_UNLOCK,解决拔出USB时,死在__irq_usr的问题
kfx [Wed, 11 Aug 2010 10:21:48 +0000 (18:21 +0800)]
mode(I2C_MODE_POLL) is ok
kfx [Wed, 11 Aug 2010 09:51:17 +0000 (17:51 +0800)]
select i2c mode: I2C_MODE_IRQ/I2C_MODE_POLL
kfx [Wed, 11 Aug 2010 09:41:55 +0000 (17:41 +0800)]
'mod i2c read bug' and 'add i2c read/write interface'
swj [Wed, 11 Aug 2010 06:41:22 +0000 (23:41 -0700)]
modified the rk2818_raho_defconfig file
swj [Wed, 11 Aug 2010 04:53:44 +0000 (21:53 -0700)]
add rtc for raho
黄涛 [Wed, 11 Aug 2010 02:52:32 +0000 (10:52 +0800)]
infosdk: modify playon key gpio
黄涛 [Wed, 11 Aug 2010 02:49:51 +0000 (10:49 +0800)]
Revert "modify playon key gpio"
This reverts commit
77d6dd51f9418632678f3c69b3a588df3d36fae4.
swj [Wed, 11 Aug 2010 02:50:21 +0000 (19:50 -0700)]
Merge branch 'develop' of 10.10.10.201:/home/rockchip/rk2818/kernel into develop
swj [Wed, 11 Aug 2010 02:49:58 +0000 (19:49 -0700)]
add rtc-s35392a for raho
cym [Wed, 11 Aug 2010 02:48:41 +0000 (10:48 +0800)]
renamed:drivers/regulator/rk2818_lp8725.h -> include/linux/regulator/rk2818_lp8725.h
cym [Wed, 11 Aug 2010 02:26:40 +0000 (10:26 +0800)]
modified pmu_lp8725 and real kernel regulator interface function
root [Wed, 11 Aug 2010 02:19:08 +0000 (10:19 +0800)]
modify playon key gpio
root [Wed, 11 Aug 2010 02:15:31 +0000 (10:15 +0800)]
lcd_hx8357 休眠唤醒序列修改
root [Tue, 10 Aug 2010 06:42:39 +0000 (14:42 +0800)]
罗伟提交fpga gpio接口修改
root [Tue, 10 Aug 2010 04:49:38 +0000 (12:49 +0800)]
delete pmem ioctl information
root [Mon, 9 Aug 2010 11:10:28 +0000 (19:10 +0800)]
add bcm4329 wlan support
root [Mon, 9 Aug 2010 11:39:16 +0000 (19:39 +0800)]
去除rk2818_serial.c 文件中 gpio_request的warning 之前提交错了
root [Mon, 9 Aug 2010 11:29:35 +0000 (19:29 +0800)]
去除rk2818_serial.c 文件中 gpio_request的warning
lyx [Mon, 9 Aug 2010 08:39:03 +0000 (01:39 -0700)]
dm9000 for info_sdk
lyx [Mon, 9 Aug 2010 08:29:53 +0000 (01:29 -0700)]
modify dm9000 for info_sdk
root [Mon, 9 Aug 2010 03:39:11 +0000 (11:39 +0800)]
modify rk2818_raho_deconfig for bcm4329 bt
root [Mon, 9 Aug 2010 02:57:41 +0000 (10:57 +0800)]
add bcm432x drivers
ChenJQ [Sat, 7 Aug 2010 23:43:05 +0000 (16:43 -0700)]
wm8994 codec add and change set volume
lyx [Sat, 7 Aug 2010 08:20:35 +0000 (01:20 -0700)]
add cs select for dm9000 and move io set function to board-XXXX.c file
swj [Sat, 7 Aug 2010 07:43:37 +0000 (00:43 -0700)]
add function for motor driver
swj [Sat, 7 Aug 2010 07:32:25 +0000 (00:32 -0700)]
add motor deriver for raho
root [Sat, 7 Aug 2010 06:25:14 +0000 (14:25 +0800)]
增加RK2818信息机SDK的板级配置
ddl [Fri, 6 Aug 2010 10:09:49 +0000 (18:09 +0800)]
Resume Makefile
ddl [Fri, 6 Aug 2010 09:41:42 +0000 (17:41 +0800)]
Camera Support DC! Modify soc_camera_s_fmt_vid_cap function for DC
黄涛 [Thu, 5 Aug 2010 08:41:38 +0000 (16:41 +0800)]
Merge remote branch 'common/android-2.6.32' into develop
Conflicts:
drivers/usb/gadget/f_adb.c
root [Thu, 5 Aug 2010 08:26:54 +0000 (01:26 -0700)]
wm8994 codec correct i2c error
cym [Thu, 5 Aug 2010 08:02:55 +0000 (16:02 +0800)]
modify i2c for read bug by kfx
黄涛 [Thu, 5 Aug 2010 04:01:16 +0000 (12:01 +0800)]
RK2818 PM: Enable wake-up events for USB ports
黄涛 [Thu, 5 Aug 2010 02:38:16 +0000 (10:38 +0800)]
rk2818_i2s: fix gcc warning: initialization from incompatible pointer type
root [Tue, 3 Aug 2010 03:28:11 +0000 (11:28 +0800)]
Simplified power management
root [Mon, 2 Aug 2010 07:27:01 +0000 (15:27 +0800)]
spi_gpio.c
root [Mon, 2 Aug 2010 07:26:05 +0000 (15:26 +0800)]
spi_gpio.c
root [Mon, 2 Aug 2010 07:24:59 +0000 (15:24 +0800)]
spi_gpio.c
root [Mon, 2 Aug 2010 06:21:02 +0000 (14:21 +0800)]
spi_gpio.c
root [Mon, 2 Aug 2010 03:42:11 +0000 (11:42 +0800)]
rm drivers/fpga/spi_fpga.h
ddl [Mon, 2 Aug 2010 03:27:23 +0000 (11:27 +0800)]
modify ov2655 Power_IO and Reset_IO for FPGA GPIO
ddl [Mon, 2 Aug 2010 03:05:36 +0000 (11:05 +0800)]
Optimize ov2655 initialization
root [Mon, 2 Aug 2010 02:57:58 +0000 (10:57 +0800)]
raho sdcard 检测修改 --raho 没有cd脚,故只能在关机情况下插拔卡
黄涛 [Mon, 2 Aug 2010 02:50:28 +0000 (10:50 +0800)]
Updating the .gitignore to ignore include/asm-arm/mach-types.h
root [Mon, 2 Aug 2010 02:37:41 +0000 (10:37 +0800)]
The i2c1 wm8994 used change to i2c3 and change wm8994 i2s channels to 48KHz
root [Mon, 2 Aug 2010 01:58:52 +0000 (09:58 +0800)]
modify drivers/fpga/Kconfig
root [Mon, 2 Aug 2010 01:24:03 +0000 (09:24 +0800)]
remove SPI_GPIO_TEST
root [Mon, 2 Aug 2010 01:13:55 +0000 (09:13 +0800)]
modify fpga's gpio name
ddl [Fri, 30 Jul 2010 10:39:46 +0000 (18:39 +0800)]
add camera files
ddl [Fri, 30 Jul 2010 10:26:22 +0000 (18:26 +0800)]
board-raho support camera and sensor ov2655
swj [Fri, 30 Jul 2010 08:25:01 +0000 (01:25 -0700)]
Merge branch 'develop' of 10.10.10.201:/home/rockchip/rk2818/kernel into develop
swj [Fri, 30 Jul 2010 08:24:05 +0000 (01:24 -0700)]
modify spi_i2c for return value
root [Fri, 30 Jul 2010 07:10:17 +0000 (15:10 +0800)]
spi_gpio.c
root [Fri, 30 Jul 2010 06:05:17 +0000 (14:05 +0800)]
add linux interface for spi_gpio.c
root [Thu, 29 Jul 2010 07:20:39 +0000 (15:20 +0800)]
补充提交iomux接口的添加
root [Thu, 29 Jul 2010 03:24:38 +0000 (11:24 +0800)]
增加 rk2818_mux_api_mode_resume 接口用来恢复最近一次的rk2818_mux_api_set。一些io复用完后,调用该接口进行恢复之前的io 模式
黄涛 [Thu, 29 Jul 2010 01:30:41 +0000 (09:30 +0800)]
Revert ".config不应该被忽略"
This reverts commit
16ebedae0e4314ec34242649bc32baba5bb24df4.
root [Thu, 29 Jul 2010 01:14:14 +0000 (09:14 +0800)]
修改使用 make rk2818_XXXX_defconfig uImage编译方式
swj [Wed, 28 Jul 2010 13:20:23 +0000 (06:20 -0700)]
Merge branch 'develop' of 10.10.10.201:/home/rockchip/rk2818/kernel into develop
swj [Wed, 28 Jul 2010 13:17:27 +0000 (06:17 -0700)]
modify spi i2c
lyx [Wed, 28 Jul 2010 09:39:17 +0000 (02:39 -0700)]
modify dm9000 interrupt flags
ddl [Wed, 28 Jul 2010 07:03:19 +0000 (15:03 +0800)]
默认default board type is raho
root [Wed, 28 Jul 2010 02:36:29 +0000 (10:36 +0800)]
nand flash cs占用iomux的修改
root [Tue, 27 Jul 2010 13:42:39 +0000 (21:42 +0800)]
修改raho板子的按键驱动
root [Tue, 27 Jul 2010 10:35:23 +0000 (18:35 +0800)]
整理屏,触摸屏,按键驱动
root [Tue, 27 Jul 2010 10:09:18 +0000 (18:09 +0800)]
wm8994 add channel
lyx [Tue, 27 Jul 2010 03:15:17 +0000 (20:15 -0700)]
modify dm9000 for raho board
root [Tue, 27 Jul 2010 02:47:23 +0000 (10:47 +0800)]
增加锐合板子触摸屏的支持
root [Mon, 26 Jul 2010 14:00:25 +0000 (22:00 +0800)]
恢复控制器的cs控制
root [Mon, 26 Jul 2010 09:57:27 +0000 (17:57 +0800)]
change raho lcd color & spi cs
黄涛 [Mon, 26 Jul 2010 09:59:04 +0000 (17:59 +0800)]
.config不应该被忽略
root [Mon, 26 Jul 2010 08:51:29 +0000 (16:51 +0800)]
fpga driver update
root [Mon, 26 Jul 2010 08:50:30 +0000 (16:50 +0800)]
fpga driver update
root [Mon, 26 Jul 2010 08:46:48 +0000 (16:46 +0800)]
fpga driver update