arm64: move DBG_MDSCR_* to asm/debug-monitors.h

In order to be able to use the DBG_MDSCR_* macros from the KVM code,
move the relevant definitions to the obvious include file.

Also move the debug_el enum to a portion of the file that is guarded
by #ifndef __ASSEMBLY__ in order to use that file from assembly code.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 51ba248164d0eeb8b4f94d405430c18a56c6ac9a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: rename pm_fake handler to trap_raz_wi

pm_fake doesn't quite describe what the handler does (ignoring writes
and returning 0 for reads).

As we're about to use it (a lot) in a different context, rename it
with a (admitedly cryptic) name that make sense for all users.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 7609c1251f9d8bbcd6a05ba22153e50cf4f88cff)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest

Fix issue with 32bit guests running on top of BE KVM host.
Indexes of high and low words of 64bit cp15 register are
swapped in case of big endian code, since 64bit cp15 state is
restored or saved with double word write or read instruction.

Define helper macro to access low words of 64bit cp15 register.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit f0a3eaff71b8bd5d5acfda1f0cf3eedf49755622)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: set and get of sys registers in BE case

Since size of all sys registers is always 8 bytes. Current
code is actually endian agnostic. Just clean it up a bit.
Removed comment about little endian. Change type of pointer
from 'void *' to 'u64 *' to enforce stronger type checking.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 26c99af1018c35020cfad1d20f02acb224807655)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: fix vgic_bitmap_get_reg function for BE 64bit case

Fix vgic_bitmap_get_reg function to return 'right' word address of
'unsigned long' bitmap value in case of BE 64bit image.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 9662fb4854e1319b4affda47f279c3f210316def)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: store kvm_vcpu_fault_info est_el2 as word

esr_el2 field of struct kvm_vcpu_fault_info has u32 type.
It should be stored as word. Current code works in LE case
because existing puts least significant word of x1 into
esr_el2, and it puts most significant work of x1 into next
field, which accidentally is OK because it is updated again
by next instruction. But existing code breaks in BE case.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit ba083d20d8cfa9e999043cd89c4ebc964ccf8927)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: MMIO support BE host running LE code

In case of guest CPU running in LE mode and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit b30070862edbdb252f9d0d3a1e61b8dc4c68e3d2)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: enable KVM in Kconfig on big-endian systems

Previous patches addresses ARMV7 big-endian virtualiztion,
kvm related issues, so enable ARM_VIRT_EXT for big-endian
now.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit f5aa462147a209dab40b02f0f70234784b913bf9)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: one_reg coproc set and get BE fixes

Fix code that handles KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls to work in BE
image. Before this fix get/set_one_reg functions worked correctly only in
LE case - reg_from_user was taking 'void *' kernel address that actually could
be target/source memory of either 4 bytes size or 8 bytes size, and code copied
from/to user memory that could hold either 4 bytes register, 8 byte register
or pair of 4 bytes registers.

In order to work in endian agnostic way reg_from_user to reg_to_user functions
should copy register value only to kernel variable with size that matches
register size. In few place where size mismatch existed fix issue on macro
caller side.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 73891f72c414afff6da6f01e7af2ff5a44a8b823)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: MMIO support BE host running LE code

In case of status register E bit is not set (LE mode) and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 27f194fd360a96cc64bebb2d69dd5abd67984b8a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: vgic mmio should hold data as LE bytes array in BE case

According to recent clarifications of mmio.data array meaning -
the mmio.data array should hold bytes as they would appear in
memory. Vgic is little endian device. And in case of BE image
kernel side that emulates vgic, holds data in BE form. So we
need to byteswap cpu<->le32 vgic registers when we read/write them
from mmio.data[].

Change has no effect in LE case because cpu already runs in le32.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 1c9f04717ca8326e8df759d5dda9cd1b3d968b5b)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: __kvm_vcpu_run function return result fix in BE case

The __kvm_vcpu_run function returns a 64-bit result in two registers,
which has to be adjusted for BE case.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 6d7311b520864531c81f0e0237e96146d8057d77)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: handle 64bit values passed to mrcc or from mcrr instructions in BE case

In some cases the mcrr and mrrc instructions in combination with the ldrd
and strd instructions need to deal with 64bit value in memory. The ldrd
and strd instructions already handle endianness within word (register)
boundaries but to get effect of the whole 64bit value represented correctly,
rr_lo_hi macro is introduced and is used to swap registers positions when
the mcrr and mrrc instructions are used. That has the effect of swapping
two words.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 19b0e60a63f758a28329aa40f4270a6c98c2dcb7)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: fix vgic V7 assembler code to work in BE image

The vgic h/w registers are little endian; when BE asm code
reads/writes from/to them, it needs to do byteswap after/before.
Byteswap code uses ARM_BE8 wrapper to add swap only if
CONFIG_CPU_BIG_ENDIAN is configured.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 64054c25cf7e060cd6780744fefe7ed3990e4f21)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: vgic: enable GICv2 emulation on top on GICv3 hardware

Add the last missing bits that enable GICv2 emulation on top of
GICv3 hardware.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 67b2abfedb7b861bead93400fa315c5c30879d51)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: vgic: add GICv3 world switch

Introduce the GICv3 world switch code used to save/restore the
GICv3 context.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 754d37726010d872f1f714a8ce8920acdfa4978c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: add the GICv3 backend

Introduce the support code for emulating a GICv2 on top of GICv3
hardware.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit b2fb1c0d378399e1427a91bb991c094f2ca09a2f)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: move HCR_EL2.{IMO,FMO} manipulation into the vgic switch code

GICv3 requires the IMO and FMO bits to be tightly coupled with some
of the interrupt controller's register switch.

In order to have similar code paths, move the manipulation of these
bits to the GICv2 switch code.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit ac3c3747e2db2f326ffc601651de544cdd33a8e9)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: split GICv2 world switch from hyp code

Move the GICv2 world switch code into its own file, and add the
necessary indirection to the arm64 switch code.

Also introduce a new type field to the vgic_params structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 1a9b13056dde7e3092304d6041ccc60a913042ea)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: remove __kvm_hyp_code_{start,end} from hyp.S

We already have __hyp_text_{start,end} to express the boundaries
of the HYP text section, and __kvm_hyp_code_{start,end} are getting
in the way of a more modular world switch code.

Just turn __kvm_hyp_code_{start,end} into #defines mapping the
linker-emited symbols.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 45451914c875bba44903ce4f1445e047b7992bf7)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: revisit implementation of irqchip_in_kernel

So far, irqchip_in_kernel() was implemented by testing the value of
vctrl_base, which worked fine with GICv2.

With GICv3, this field is useless, as we're using system registers
instead of a emmory mapped interface. To solve this, add a boolean
flag indicating if the we're using a vgic or not.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit f982cf4e9c37b19478c7bc6e0484a43a7e78cf57)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: split GICv2 backend from the main vgic code

Brutally hack the innocent vgic code, and move the GICv2 specific code
to its own file, using vgic_ops and vgic_params as a way to pass
information between the two blocks.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 8f186d522c69bb18dd9b93a634da4953228c67d4)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: introduce vgic_params structure

Move all the data specific to a given GIC implementation into its own
little structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit ca85f623e37d096206e092ef037a145a60fa7f85)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: introduce vgic_enable

Move the code dealing with enabling the VGIC on to vgic_ops.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit da8dafd1777cdd93091207952297d221a88e6479)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: abstract VMCR access

Instead of directly messing with with the GICH_VMCR bits for the CPU
interface save/restore code, add accessors that encode/decode the
entire set of registers exposed by VMCR.

Not the most efficient thing, but given that this code is only used
by the save/restore code, performance is far from being critical.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit beee38b9d0c0ea6cf2a7f35c3108f7d8281d4545)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: move underflow handling to vgic_ops

Move the code dealing with LR underflow handling to its own functions,
and make them accessible through vgic_ops.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 909d9b5025f149af6cfc304a76ad6218e6622cc0)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: abstract MISR decoding

Instead of directly dealing with the GICH_MISR bits, move the code to
its own function and use a couple of public flags to represent the
actual state.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 495dd859f304689a7cd5ef413c439cb090dc25e6)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: abstract EISR bitmap access

Move the GICH_EISR access to its own function.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 8d6a0313c125c3c7b208b75695fe6ab00afab4c5)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: abstract access to the ELRSR bitmap

Move the GICH_ELRSR access to its own functions, and add them to
the vgic_ops structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 69bb2c9fbc11d9d4358fbb798db15c9092eb4d8c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: introduce vgic_ops and LR manipulation primitives

In order to split the various register manipulation from the main vgic
code, introduce a vgic_ops structure, and start by abstracting the
LR manipulation code with a couple of accessors.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 8d5c6b06a5d5f8ebcf40558e566781d572920740)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm/arm64: vgic: move GICv2 registers to their own structure

In order to make way for the GICv3 registers, move the v2-specific
registers to their own structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit eede821dbfd58df89edb072da64e006321eaef58)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: allow export and import of generic timer regs

For correct guest suspend/resume behaviour we need to ensure we include
the generic timer registers for 64 bit guests. As CONFIG_KVM_ARM_TIMER is
always set for arm64 we don't need to worry about null implementations.
However I have re-jigged the kvm_arm_timer_set/get_reg declarations to
be in the common include/kvm/arm_arch_timer.h headers.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 1df08ba0aa95f1a8832b7162eec51069bd9be7ae)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: export demux regids as KVM_REG_ARM64

I suspect this is a -ECUTPASTE fault from the initial implementation. If
we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG
implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues.

The kvm/api.txt document describes all arm64 registers as starting with
0x60xx... (i.e KVM_REG_ARM64).

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit efd48ceacea78e4d4656aa0a6bf4c5b92ed22130)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping

A userspace process can map device MMIO memory via VFIO or /dev/mem,
e.g., for platform device passthrough support in QEMU.

During early development, we found the PAGE_S2 memory type being used
for MMIO mappings.  This patch corrects that by using the more strongly
ordered memory type for device MMIO mappings: PAGE_S2_DEVICE.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit b88657674d39fc2127d62d0de9ca142e166443c8)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: Unmap IPA on memslot delete/move

Currently when a KVM region is deleted or moved after
KVM_SET_USER_MEMORY_REGION ioctl, the corresponding
intermediate physical memory is not unmapped.

This patch corrects this and unmaps the region's IPA range
in kvm_arch_commit_memory_region using unmap_stage2_range.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit df6ce24f2ee485c4f9a5cb610063a5eb60da8267)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Fix and refactor unmap_range

unmap_range() was utterly broken, to quote Marc, and broke in all sorts
of situations.  It was also quite complicated to follow and didn't
follow the usual scheme of having a separate iterating function for each
level of page tables.

Address this by refactoring the code and introduce a pgd_clear()
function.

Reviewed-by: Jungseok Lee <jays.lee@samsung.com>
Reviewed-by: Mario Smarduch <m.smarduch@samsung.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 4f853a714bf16338ff5261128e6c7ae2569e9505)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: prepare for KVM_(S|G)ET_MP_STATE on other architectures

Highlight the aspects of the ioctls that are actually specific to x86
and ia64. As defined restrictions (irqchip) and mp states may not apply
to other architectures, these parts are flagged to belong to x86 and ia64.

In preparation for the use of KVM_(S|G)ET_MP_STATE by s390.
Fix a spelling error (KVM_SET_MP_STATE vs. KVM_SET_MPSTATE) on the way.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
(cherry picked from commit 0b4820d6d8b6448bc9f7fac1bb1a801a53b425e1)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: add missing cleanup_srcu_struct

Reported-by: hrg <hrgstephen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 820b3fcdeb80d30410f4427d2cbf9161c35fdeef)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: Enable minimalistic support for Cortex-A53

In order to allow KVM to run on Cortex-A53 implementations, wire the
minimal support required.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 1252b3313642c3d0dff5b951b625468bf0dcd059)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: kvm: use inner-shareable barriers for inner-shareable maintenance

In order to ensure completion of inner-shareable maintenance instructions
(cache and TLB) on AArch64, we can use the -ish suffix to the dsb
instruction.

This patch relaxes our dsb sy instructions to dsb ish where possible.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit ee9e101c11478680d579bd20bb38a4d3e2514fe3)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: barriers: make use of barrier options with explicit barriers

When calling our low-level barrier macros directly, we can often suffice
with more relaxed behaviour than the default "all accesses, full system"
option.

This patch updates the users of dsb() to specify the option which they
actually require.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 98f7685ee69f871ba991089cb9685f0da07517ea)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

kvm/irqchip: Speed up KVM_SET_GSI_ROUTING

When starting lots of dataplane devices the bootup takes very long on
Christian's s390 with irqfd patches. With larger setups he is even
able to trigger some timeouts in some components.  Turns out that the
KVM_SET_GSI_ROUTING ioctl takes very long (strace claims up to 0.1 sec)
when having multiple CPUs.  This is caused by the  synchronize_rcu and
the HZ=100 of s390.  By changing the code to use a private srcu we can
speed things up.  This patch reduces the boot time till mounting root
from 8 to 2 seconds on my s390 guest with 100 disks.

Uses of hlist_for_each_entry_rcu, hlist_add_head_rcu, hlist_del_init_rcu
are fine because they do not have lockdep checks (hlist_for_each_entry_rcu
uses rcu_dereference_raw rather than rcu_dereference, and write-sides
do not do rcu lockdep at all).

Note that we're hardly relying on the "sleepable" part of srcu.  We just
want SRCU's faster detection of grace periods.

Testing was done by Andrew Theurer using netperf tests STREAM, MAERTS
and RR.  The difference between results "before" and "after" the patch
has mean -0.2% and standard deviation 0.6%.  Using a paired t-test on the
data points says that there is a 2.5% probability that the patch is the
cause of the performance difference (rather than a random fluctuation).

(Restricting the t-test to RR, which is the most likely to be affected,
changes the numbers to respectively -0.3% mean, 0.7% stdev, and 8%
probability that the numbers actually say something about the patch.
The probability increases mostly because there are fewer data points).

Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 719d93cd5f5c5c8775b7a38192069e8e1d1ac46e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user space

We have PSCI v0.2 emulation available in KVM ARM/ARM64
hence advertise this to user space (i.e. QEMU or KVMTOOL)
via KVM_CHECK_EXTENSION ioctl.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 4447a208f7fc2e2dff8c6a8df2a1fd6dd72fb3e2)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPEND

This patch adds emulation of PSCI v0.2 CPU_SUSPEND function call for
KVM ARM/ARM64. This is a CPU-level function call which can suspend
current CPU or current CPU cluster. We don't have VCPU clusters in
KVM so we only suspend the current VCPU.

The CPU_SUSPEND emulation is not tested much because currently there
is no CPUIDLE driver in Linux kernel that uses PSCI CPU_SUSPEND. The
PSCI CPU_SUSPEND implementation in ARM64 kernel was tested using a
Simple CPUIDLE driver which is not published due to unstable DT-bindings
for PSCI.
(For more info, http://lwn.net/Articles/574950/)

For simplicity, we implement CPU_SUSPEND emulation similar to WFI
(Wait-for-interrupt) emulation and we also treat power-down request
to be same as stand-by request. This is consistent with section
5.4.1 and section 5.4.2 of PSCI v0.2 specification.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit b376d02b53b87f8684f91f13ba4ee43331850fcd)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2

As-per PSCI v0.2, the source CPU provides physical address of
"entry point" and "context id" for starting a target CPU. Also,
if target CPU is already running then we should return ALREADY_ON.

Current emulation of CPU_ON function does not consider physical
address of "context id" and returns INVALID_PARAMETERS if target
CPU is already running.

This patch updates kvm_psci_vcpu_on() such that it works for both
PSCI v0.1 and PSCI v0.2.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit aa8aeefe5e567637bbec7d7a3031cc057e3af303)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functions

This patch adds emulation of PSCI v0.2 MIGRATE, MIGRATE_INFO_TYPE, and
MIGRATE_INFO_UP_CPU function calls for KVM ARM/ARM64.

KVM ARM/ARM64 being a hypervisor (and not a Trusted OS), we cannot provide
this functions hence we emulate these functions in following way:
1. MIGRATE - Returns "Not Supported"
2. MIGRATE_INFO_TYPE - Return 2 i.e. Trusted OS is not present
3. MIGRATE_INFO_UP_CPU - Returns "Not Supported"

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit bab0b43012a8ad64877fa46134370a7f5c6ce861)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFO

This patch adds emulation of PSCI v0.2 AFFINITY_INFO function call
for KVM ARM/ARM64. This is a VCPU-level function call which will be
used to determine current state of given affinity level.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit e6bc13c8a70eabc6a39098ccedf6129c734e3db3)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET

The PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET functions are system-level
functions hence cannot be fully emulated by in-kernel PSCI emulation code.

To tackle this, we forward PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET function
calls from vcpu to user space (i.e. QEMU or KVMTOOL) via kvm_run structure
using KVM_EXIT_SYSTEM_EVENT exit reasons.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 4b1238269ed340d59ef829fd9c30a39cfb2923a8)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header

Currently, we don't have an exit reason to notify user space about
a system-level event (for e.g. system reset or shutdown) triggered
by the VCPU. This patch adds exit reason KVM_EXIT_SYSTEM_EVENT for
this purpose. We can also inform user space about the 'type' and
architecture specific 'flags' of a system-level event using the
kvm_run structure.

This newly added KVM_EXIT_SYSTEM_EVENT will be used by KVM ARM/ARM64
in-kernel PSCI v0.2 support to reset/shutdown VMs.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 8ad6b634928a25971dc42dce101808b1491f87ec)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexible

Currently, the kvm_psci_call() returns 'true' or 'false' based on whether
the PSCI function call was handled successfully or not. This does not help
us emulate system-level PSCI functions where the actual emulation work will
be done by user space (QEMU or KVMTOOL). Examples of such system-level PSCI
functions are: PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET.

This patch updates kvm_psci_call() to return three types of values:
1) > 0 (success)
2) = 0 (success but exit to user space)
3) < 0 (errors)

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit e8e7fcc5e2710b31ef842ee799db99c07986c364)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Add base for PSCI v0.2 emulation

Currently, the in-kernel PSCI emulation provides PSCI v0.1 interface to
VCPUs. This patch extends current in-kernel PSCI emulation to provide
PSCI v0.2 interface to VCPUs.

By default, ARM/ARM64 KVM will always provide PSCI v0.1 interface for
keeping the ABI backward-compatible.

To select PSCI v0.2 interface for VCPUs, the user space (i.e. QEMU or
KVMTOOL) will have to set KVM_ARM_VCPU_PSCI_0_2 feature when doing VCPU
init using KVM_ARM_VCPU_INIT ioctl.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 7d0f84aae9e231930985eaff63ac91b61aaa15d6)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/ARM64: KVM: Add common header for PSCI related defines

We need a common place to share PSCI related defines among ARM kernel,
ARM64 kernel, KVM ARM/ARM64 PSCI emulation, and user space.

We introduce uapi/linux/psci.h for this purpose. This newly added
header will be first used by KVM ARM/ARM64 in-kernel PSCI emulation
and user space (i.e. QEMU or KVMTOOL).

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit e546eea74ec66698e29c583639cf6e2a11e46490)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Add capability to advertise PSCI v0.2 support

User space (i.e. QEMU or KVMTOOL) should be able to check whether KVM
ARM/ARM64 supports in-kernel PSCI v0.2 emulation. For this purpose, we
define KVM_CAP_ARM_PSCI_0_2 in KVM user space interface header.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 717abd208dff75b343243aa5ed688f62190dda5e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address.

Currently below check in vgic_ioaddr_overlap will always succeed,
because the vgic dist base and vgic cpu base are still kept UNDEF
after initialization. The code as follows will be return forever.

if (IS_VGIC_ADDR_UNDEF(dist) || IS_VGIC_ADDR_UNDEF(cpu))
                return 0;

So, before invoking the vgic_ioaddr_overlap, it needs to set the
corresponding base address firstly.

Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 30c2117085bc4e05d091cee6eba79f069b41a9cd)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: async_pf: change async_pf_execute() to use get_user_pages(tsk => NULL)

async_pf_execute() passes tsk == current to gup(), this is doesn't
hurt but unnecessary and misleading. "tsk" is only used to account
the number of faults and current is the random workqueue thread.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e9545b9f8aeb63e05818e4b3250057260bc072aa)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: async_pf: kill the unnecessary use_mm/unuse_mm async_pf_execute()

async_pf_execute() has no reasons to adopt apf->mm, gup(current, mm)
should work just fine even if current has another or NULL ->mm.

Recently kvm_async_page_present_sync() was added insedie the "use_mm"
section, but it seems that it doesn't need current->mm too.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d72d946d0b649b79709b99b9d5cb7269fff8afaa)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses

Since KVM internally represents the ICFGR registers by stuffing two
of them into one word, the offset for accessing the internal
representation and the one for the MMIO based access are different.
So keep the original offset around, but adjust the internal array
offset by one bit.

Reported-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit f2ae85b2ab3776b9e4e42e5b6fa090f40d396794)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: async_pf: mm->mm_users can not pin apf->mm

get_user_pages(mm) is simply wrong if mm->mm_users == 0 and exit_mmap/etc
was already called (or is in progress), mm->mm_count can only pin mm->pgd
and mm_struct itself.

Change kvm_setup_async_pf/async_pf_execute to inc/dec mm->mm_users.

kvm_create_vm/kvm_destroy_vm play with ->mm_count too but this case looks
fine at first glance, it seems that this ->mm is only used to verify that
current->mm == kvm->mm.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 41c22f626254b9dc0376928cae009e73d1b6a49a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: Fix sgi dispatch problem

When dispatch SGI(mode == 0), that is the vcpu of VM should send
sgi to the cpu which the target_cpus list.
So, there must add the "break" to branch of case 0.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 91021a6c8ffdc55804dab5acdfc7de4f278b9ac3)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm: KVM: fix possible misalignment of PGDs and bounce page

The kvm/mmu code shared by arm and arm64 uses kalloc() to allocate
a bounce page (if hypervisor init code crosses page boundary) and
hypervisor PGDs. The problem is that kalloc() does not guarantee
the proper alignment. In the case of the bounce page, the page sized
buffer allocated may also cross a page boundary negating the purpose
and leading to a hang during kvm initialization. Likewise the PGDs
allocated may not meet the minimum alignment requirements of the
underlying MMU. This patch uses __get_free_page() to guarantee the
worst case alignment needs of the bounce page and PGDs on both arm
and arm64.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 5d4e08c45a6cf8f1ab3c7fa375007635ac569165)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: disable KVM in Kconfig on big-endian systems

KVM currently crashes and burns on big-endian hosts, so don't allow it
to be selected until we've got that fixed.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 4e4468fac4381b92eb333d94256e7fb8350f3de3)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: add kvm_is_error_gpa() helper

It's quite common (in the s390 guest access code) to test if a guest
physical address points to a valid guest memory area or not.
So add a simple helper function in common code, since this might be
of interest for other architectures as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
(cherry picked from commit dfeec843fb237d73947e818f961e8d6f0df22b01)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm, kvm: fix double lock on cpu_add_remove_lock

Commit 8146875de7d4 (arm, kvm: Fix CPU hotplug callback registration)
holds the lock before calling the two functions:

kvm_vgic_hyp_init()
kvm_timer_hyp_init()

and both the two functions are calling register_cpu_notifier()
to register cpu notifier, so cause double lock on cpu_add_remove_lock.

Considered that both two functions are only called inside
kvm_arch_init() with holding cpu_add_remove_lock, so simply use
__register_cpu_notifier() to fix the problem.

Fixes: 8146875de7d4 (arm, kvm: Fix CPU hotplug callback registration)
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 553f809e23f00976caea7a1ebdabaa58a6383e7d)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: Add boot time configuration of Intermediate Physical Address size

ARMv8 supports a range of physical address bit sizes. The PARange bits
from ID_AA64MMFR0_EL1 register are read during boot-time and the
intermediate physical address size bits are written in the translation
control registers (TCR_EL1 and VTCR_EL2).

There is no change in the VA bits and levels of translation.

Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Reviewed-by: Will Deacon <Will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 87366d8cf7b3f6dc34633938aa8766e5a390ce33)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: fix non-VGIC compilation

Add a stub for kvm_vgic_addr when compiling without
CONFIG_KVM_ARM_VGIC. The usefulness of this configurarion is extremely
doubtful, but let's fix it anyway (until we decide that we'll always
support a VGIC).

Reported-by: Michele Paolino <m.paolino@virtualopensystems.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 6cbde8253a8143ada18ec0d1711230747a7c1934)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: fix warning in mmu.c

Compiling with THP enabled leads to the following warning:

arch/arm/kvm/mmu.c: In function ‘unmap_range’:
arch/arm/kvm/mmu.c:177:39: warning: ‘pte’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   if (kvm_pmd_huge(*pmd) || page_empty(pte)) {
                                        ^
Code inspection reveals that these two cases are mutually exclusive,
so GCC is a bit overzealous here. Silence it anyway by initializing
pte to NULL and testing it later on.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 56041bf920d2937b7cadcb30cb206f0372eee814)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: trap VM system registers until MMU and caches are ON

In order to be able to detect the point where the guest enables
its MMU and caches, trap all the VM related system registers.

Once we see the guest enabling both the MMU and the caches, we
can go back to a saner mode of operation, which is to leave these
registers in complete control of the guest.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 8034699a42d68043b495c7e0cfafccd920707ec8)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: add world-switch for AMAIR{0,1}

HCR.TVM traps (among other things) accesses to AMAIR0 and AMAIR1.
In order to minimise the amount of surprise a guest could generate by
trying to access these registers with caches off, add them to the
list of registers we switch/handle.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit af20814ee927ed888288d98917a766b4179c4fe0)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: introduce per-vcpu HYP Configuration Register

So far, KVM/ARM used a fixed HCR configuration per guest, except for
the VI/VF/VA bits to control the interrupt in absence of VGIC.

With the upcoming need to dynamically reconfigure trapping, it becomes
necessary to allow the HCR to be changed on a per-vcpu basis.

The fix here is to mimic what KVM/arm64 already does: a per vcpu HCR
field, initialized at setup time.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit ac30a11e8e92a03dbe236b285c5cbae0bf563141)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: fix ordering of 64bit coprocessor accesses

Commit 240e99cbd00a (ARM: KVM: Fix 64-bit coprocessor handling)
added an ordering dependency for the 64bit registers.

The order described is: CRn, CRm, Op1, Op2, 64bit-first.

Unfortunately, the implementation is: CRn, 64bit-first, CRm...

Move the 64bit test to be last in order to match the documentation.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 547f781378a22b65c2ab468f235c23001b5924da)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: fix handling of trapped 64bit coprocessor accesses

Commit 240e99cbd00a (ARM: KVM: Fix 64-bit coprocessor handling)
changed the way we match the 64bit coprocessor access from
user space, but didn't update the trap handler for the same
set of registers.

The effect is that a trapped 64bit access is never matched, leading
to a fault being injected into the guest. This went unnoticed as we
didn't really trap any 64bit register so far.

Placing the CRm field of the access into the CRn field of the matching
structure fixes the problem. Also update the debug feature to emit the
expected string in case of failing match.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 46c214dd595381c880794413facadfa07fba5c95)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: force cache clean on page fault when caches are off

In order for a guest with caches disabled to observe data written
contained in a given page, we need to make sure that page is
committed to memory, and not just hanging in the cache (as guest
accesses are completely bypassing the cache until it decides to
enable it).

For this purpose, hook into the coherent_cache_guest_page
function and flush the region if the guest SCTLR
register doesn't show the MMU and caches as being enabled.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 159793001d7d85af17855630c94f0a176848e16b)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: flush VM pages before letting the guest enable caches

When the guest runs with caches disabled (like in an early boot
sequence, for example), all the writes are diectly going to RAM,
bypassing the caches altogether.

Once the MMU and caches are enabled, whatever sits in the cache
becomes suddenly visible, which isn't what the guest expects.

A way to avoid this potential disaster is to invalidate the cache
when the MMU is being turned on. For this, we hook into the SCTLR_EL1
trapping code, and scan the stage-2 page tables, invalidating the
pages/sections that have already been mapped in.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 9d218a1fcf4c6b759d442ef702842fae92e1ea61)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: introduce kvm_p*d_addr_end

The use of p*d_addr_end with stage-2 translation is slightly dodgy,
as the IPA is 40bits, while all the p*d_addr_end helpers are
taking an unsigned long (arm64 is fine with that as unligned long
is 64bit).

The fix is to introduce 64bit clean versions of the same helpers,
and use them in the stage-2 page table code.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit a3c8bd31af260a17d626514f636849ee1cd1f63e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: trap VM system registers until MMU and caches are ON

In order to be able to detect the point where the guest enables
its MMU and caches, trap all the VM related system registers.

Once we see the guest enabling both the MMU and the caches, we
can go back to a saner mode of operation, which is to leave these
registers in complete control of the guest.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 4d44923b17bff283c002ed961373848284aaff1b)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: allows discrimination of AArch32 sysreg access

The current handling of AArch32 trapping is slightly less than
perfect, as it is not possible (from a handler point of view)
to distinguish it from an AArch64 access, nor to tell a 32bit
from a 64bit access either.

Fix this by introducing two additional flags:
- is_aarch32: true if the access was made in AArch32 mode
- is_32bit: true if is_aarch32 == true and a MCR/MRC instruction
  was used to perform the access (as opposed to MCRR/MRRC).

This allows a handler to cover all the possible conditions in which
a system register gets trapped.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 2072d29c46b73e39b3c6c56c6027af77086f45fd)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: force cache clean on page fault when caches are off

In order for the guest with caches off to observe data written
contained in a given page, we need to make sure that page is
committed to memory, and not just hanging in the cache (as
guest accesses are completely bypassing the cache until it
decides to enable it).

For this purpose, hook into the coherent_icache_guest_page
function and flush the region if the guest SCTLR_EL1
register doesn't show the MMU  and caches as being enabled.
The function also get renamed to coherent_cache_guest_page.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 2d58b733c87689d3d5144e4ac94ea861cc729145)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT

Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added
support for CPU power-management, using a cpu_notifier to re-init
KVM on a CPU that entered CPU idle.

The code assumed that a CPU entering idle would actually be powered
off, loosing its state entierely, and would then need to be
reinitialized. It turns out that this is not always the case, and
some HW performs CPU PM without actually killing the core. In this
case, we try to reinitialize KVM while it is still live. It ends up
badly, as reported by Andre Przywara (using a Calxeda Midway):

[    3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760
[    3.663897] unexpected data abort in Hyp mode at: 0xc067d150
[    3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0

The trick here is to detect if we've been through a full re-init or
not by looking at HVBAR (VBAR_EL2 on arm64). This involves
implementing the backend for __hyp_get_vectors in the main KVM HYP
code (rather small), and checking the return value against the
default one when the CPU notifier is called on CPU_PM_EXIT.

Reported-by: Andre Przywara <osp@andrep.de>
Tested-by: Andre Przywara <osp@andrep.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <rob.herring@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b20c9f29c5c25921c6ad18b50d4b61e6d181c3cc)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop

Use the arch specific function kvm_arch_vcpu_runnable() to add a further
criterium to identify a suitable vcpu to yield to during undirected yield
processing.

Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 98f4a14676127397c54cab7d6119537ed4d113a2)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: Add VGIC device control for arm64

This fixes the build breakage introduced by
c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f and adds support for the device
control API and save/restore of the VGIC state for ARMv8.

The defines were simply missing from the arm64 header files and
uaccess.h must be implicitly imported from somewhere else on arm.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2a2f3e269c75edf916de5967079069aeb6a601cb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

asmlinkage, kvm: Make kvm_rebooting visible

kvm_rebooting is referenced from assembler code, thus
needs to be visible.

Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1391845930-28580-1-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
(cherry picked from commit 52480137d82062bb8d0fb778cb9934667958e367)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: fix typo: s/SERRROR/SERROR/

Somehow SERROR has acquired an additional 'R' in a couple of headers.
This patch removes them before they spread further. As neither instance
is in use yet, no other sites need to be fixed up.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit bfb67a5606376bb32cb6f93dc05cda2e8c2038a5)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: async_pf: Add missing call for async page present

Commit KVM: async_pf: Provide additional direct page notification
missed the call from kvm_check_async_pf_completion to the new introduced function.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1179ba539541347d5427cde8bcfdaa5ead14f3aa)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: async_pf: Allow to wait for outstanding work

On s390 we are not able to cancel work. Instead we will flush the work and wait for
completion.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
(cherry picked from commit 9f2ceda49c6b8827c795731c204f6c2587886e2c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: async_pf: Provide additional direct page notification

By setting a Kconfig option, the architecture can control when
guest notifications will be presented by the apf backend.
There is the default batch mechanism, working as before, where the vcpu
thread should pull in this information.
Opposite to this, there is now the direct mechanism, that will push the
information to the guest.
This way s390 can use an already existing architecture interface.

Still the vcpu thread should call check_completion to cleanup leftovers.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
(cherry picked from commit e0ead41a6dac09f86675ce07a66e4b253a9b7bd5)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()

If kvm_io_bus_register_dev() fails then it returns success but it should
return an error code.

I also did a little cleanup like removing an impossible NULL test.

Cc: stable@vger.kernel.org
Fixes: 2b3c246a682c ('KVM: Make coalesced mmio use a device per zone')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit aac5c4226e7136c331ed384c25d5560204da10a0)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub

Commit 7940876e1330671708186ac3386aa521ffb5c182 ("kvm: make local
functions static") broke KVM PPC builds due to removing (rather than
moving) the stub version of kvm_vcpu_eligible_for_directed_yield().

This patch reintroduces it.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Alexander Graf <agraf@suse.de>
[Move the #ifdef inside the function. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 4a55dd7273c95b4a19fbcf0ae1bbd1cfd09dfc36)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: Remove duplicate include

trace.h was included twice. Remove duplicate inclusion.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 61466710de078c697106fa5b70ec7afc9feab520)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: relax the requirements of VMA alignment for THP

The THP code in KVM/ARM is a bit restrictive in not allowing a THP
to be used if the VMA is not 2MB aligned. Actually, it is not so much
the VMA that matters, but the associated memslot:

A process can perfectly mmap a region with no particular alignment
restriction, and then pass a 2MB aligned address to KVM. In this
case, KVM will only use this 2MB aligned region, and will ignore
the range between vma->vm_start and memslot->userspace_addr.

It can also choose to place this memslot at whatever alignment it
wants in the IPA space. In the end, what matters is the relative
alignment of the user space and IPA mappings with respect to a
2M page. They absolutely must be the same if you want to use THP.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 136d737fd20102f1be9b02356590fd55e3a40d0e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

kvm: make local functions static

Running 'make namespacecheck' found lots of functions that
should be declared static, since only used in one file.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
(cherry picked from commit 7940876e1330671708186ac3386aa521ffb5c182)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: Force undefined exception for Guest SMC intructions

The SMC-based PSCI emulation for Guest is going to be very different
from the in-kernel HVC-based PSCI emulation hence for now just inject
undefined exception when Guest executes SMC instruction.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit e5cf9dcdbfd26cd4e1991db08755da900454efeb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host

This patch allows us to have X-Gene guest VCPU when using KVM arm64
on APM X-Gene host.

We add KVM_ARM_TARGET_XGENE_POTENZA for X-Gene Potenza compatible
guest VCPU and we return KVM_ARM_TARGET_XGENE_POTENZA in kvm_target_cpu()
when running on X-Gene host with Potenza core.

[maz: sanitized the commit log]

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit e28100bd8ed9e37b7cd4578140a1e7f95bd40835)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: Add Kconfig option for max VCPUs per-Guest

Current max VCPUs per-Guest is set to 4 which is preventing
us from creating a Guest (or VM) with 8 VCPUs on Host (e.g.
X-Gene Storm SOC) with 8 Host CPUs.

The correct value of max VCPUs per-Guest should be same as
the max CPUs supported by GICv2 which is 8 but, increasing
value of max VCPUs per-Guest can make things slower hence
we add Kconfig option to let KVM users select appropriate
max VCPUs per-Guest.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit da7814700a0c408bead58ce4714b7625ffbaade1)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm-vgic: Support CPU interface reg access

Implement support for the CPU interface register access driven by MMIO
address offsets from the CPU interface base address.  Useful for user
space to support save/restore of the VGIC state.

This commit adds support only for the same logic as the current VGIC
support, and no more.  For example, the active priority registers are
handled as RAZ/WI, just like setting priorities on the emulated
distributor.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit fa20f5aea56f271f83e91b9cde00f043a5a14990)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers

Handle MMIO accesses to the two registers which should support both the
case where the VMs want to read/write either of these registers and the
case where user space reads/writes these registers to do save/restore of
the VGIC state.

Note that the added complexity compared to simple set/clear enable
registers stems from the bookkeping of source cpu ids.  It may be
possible to change the underlying data structure to simplify the
complexity, but since this is not in the critical path at all, this will
do.

Also note that reading this register from a live guest will not be
accurate compared to on hardware, because some state may be living on
the CPU LRs and the only way to give a consistent read would be to force
stop all the VCPUs and request them to unqueu the LR state onto the
distributor.  Until we have an actual user of live reading this
register, we can live with the difference.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 90a5355ee7639e92c0492ec592cba5c31bd80687)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm-vgic: Support unqueueing of LRs to the dist

To properly access the VGIC state from user space it is very unpractical
to have to loop through all the LRs in all register access functions.
Instead, support moving all pending state from LRs to the distributor,
but leave active state LRs alone.

Note that to accurately present the active and pending state to VCPUs
reading these distributor registers from a live VM, we would have to
stop all other VPUs than the calling VCPU and ask each CPU to unqueue
their LR state onto the distributor and add fields to track active state
on the distributor side as well.  We don't have any users of such
functionality yet and there are other inaccuracies of the GIC emulation,
so don't provide accurate synchronized access to this state just yet.
However, when the time comes, having this function should help.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit cbd333a4bfd0d93bba36d46a0e4e7979228873a6)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm-vgic: Add vgic reg access from dev attr

Add infrastructure to handle distributor and cpu interface register
accesses through the KVM_{GET/SET}_DEVICE_ATTR interface by adding the
KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS groups
and defining the semantics of the attr field to be the MMIO offset as
specified in the GICv2 specs.

Missing register accesses or other changes in individual register access
functions to support save/restore of the VGIC state is added in
subsequent patches.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put

The arch-generic KVM code expects the cpu field of a vcpu to be -1 if
the vcpu is no longer assigned to a cpu.  This is used for the optimized
make_all_cpus_request path and will be used by the vgic code to check
that no vcpus are running.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit e9b152cb957cb194437f37e79f0f3c9d34fe53d6)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm-vgic: Make vgic mmio functions more generic

Rename the vgic_ranges array to vgic_dist_ranges to be more specific and
to prepare for handling CPU interface register access as well (for
save/restore of VGIC state).

Pass offset from distributor or interface MMIO base to
find_matching_range function instead of the physical address of the
access in the VM memory map.  This allows other callers unaware of the
VM specifics, but with generic VGIC knowledge to reuse the function.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 1006e8cb22e861260688917ca4cfe6cde8ad69eb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

irqchip: arm-gic: Define additional MMIO offsets and masks

Define CPU interface offsets for the GICC_ABPR, GICC_APR, and GICC_IIDR
registers.  Define distributor registers for the GICD_SPENDSGIR and the
GICD_CPENDSGIR.  KVM/ARM needs to know about these definitions to fully
support save/restore of the VGIC.

Also define some masks and shifts for the various GICH_VMCR fields.

Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 0307e1770fdeff2732cf7a35d0f7f49db67c6621)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>