firefly-linux-kernel-4.4.55.git
8 years agosched: Make energy awareness a sched feature
Morten Rasmussen [Tue, 13 Jan 2015 13:45:51 +0000 (13:45 +0000)]
sched: Make energy awareness a sched feature

This patch introduces the ENERGY_AWARE sched feature, which is
implemented using jump labels when SCHED_DEBUG is defined. It is
statically set false when SCHED_DEBUG is not defined. Hence this doesn't
allow energy awareness to be enabled without SCHED_DEBUG. This
sched_feature knob will be replaced later with a more appropriate
control knob when things have matured a bit.

ENERGY_AWARE is based on per-entity load-tracking hence FAIR_GROUP_SCHED
must be enable. This dependency isn't checked at compile time yet.

cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
8 years agosched: Documentation for scheduler energy cost model
Morten Rasmussen [Tue, 13 Jan 2015 13:43:28 +0000 (13:43 +0000)]
sched: Documentation for scheduler energy cost model

This documentation patch provides an overview of the experimental
scheduler energy costing model, associated data structures, and a
reference recipe on how platforms can be characterized to derive energy
models.

Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
8 years agosched: Prevent unnecessary active balance of single task in sched group
Morten Rasmussen [Thu, 2 Jul 2015 16:16:34 +0000 (17:16 +0100)]
sched: Prevent unnecessary active balance of single task in sched group

Scenarios with the busiest group having just one task and the local
being idle on topologies with sched groups with different numbers of
cpus manage to dodge all load-balance bailout conditions resulting the
nr_balance_failed counter to be incremented. This eventually causes a
pointless active migration of the task. This patch prevents this by not
incrementing the counter when the busiest group only has one task.
ASYM_PACKING migrations and migrations due to reduced capacity should
still take place as these are explicitly captured by
need_active_balance().

A better solution would be to not attempt the load-balance in the first
place, but that requires significant changes to the order of bailout
conditions and statistics gathering.

cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
8 years agosched: Enable idle balance to pull single task towards cpu with higher capacity
Dietmar Eggemann [Mon, 26 Jan 2015 19:47:28 +0000 (19:47 +0000)]
sched: Enable idle balance to pull single task towards cpu with higher capacity

We do not want to miss out on the ability to pull a single remaining
task from a potential source cpu towards an idle destination cpu. Add an
extra criteria to need_active_balance() to kick off active load balance
if the source cpu is over-utilized and has lower capacity than the
destination cpu.

cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
8 years agosched: Consider spare cpu capacity at task wake-up
Morten Rasmussen [Mon, 6 Jul 2015 14:01:10 +0000 (15:01 +0100)]
sched: Consider spare cpu capacity at task wake-up

find_idlest_group() selects the wake-up target group purely
based on group load which leads to suboptimal choices in low load
scenarios. An idle group with reduced capacity (due to RT tasks or
different cpu type) isn't necessarily a better target than a lightly
loaded group with higher capacity.

The patch adds spare capacity as an additional group selection
parameter. The target group is now selected based on the following
criteria:

1. Return the group with the cpu with most spare capacity and this
capacity is significant if such group exists. Significant spare capacity
is currently at least 20% to spare.

2. Return the group with the lowest load, unless it is the local group
in which case NULL is returned and the search is continued at the next
(lower) level.

cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
8 years agosched: Add cpu capacity awareness to wakeup balancing
Morten Rasmussen [Sat, 9 May 2015 18:53:49 +0000 (19:53 +0100)]
sched: Add cpu capacity awareness to wakeup balancing

Wakeup balancing is completely unaware of cpu capacity, cpu utilization
and task utilization. The task is preferably placed on a cpu which is
idle in the instant the wakeup happens. New tasks
(SD_BALANCE_{FORK,EXEC} are placed on an idle cpu in the idlest group if
such can be found, otherwise it goes on the least loaded one. Existing
tasks (SD_BALANCE_WAKE) are placed on the previous cpu or an idle cpu
sharing the same last level cache unless the wakee_flips heuristic in
wake_wide() decides to fallback to considering cpus outside SD_LLC.
Hence existing tasks are not guaranteed to get a chance to migrate to a
different group at wakeup in case the current one has reduced cpu
capacity (due RT/IRQ pressure or different uarch e.g. ARM big.LITTLE).
They may eventually get pulled by other cpus doing
periodic/idle/nohz_idle balance, but it may take quite a while before it
happens.

This patch adds capacity awareness to find_idlest_{group,queue} (used by
SD_BALANCE_{FORK,EXEC} and SD_BALANCE_WAKE under certain circumstances)
such that groups/cpus that can accommodate the waking task based on task
utilization are preferred. In addition, wakeup of existing tasks
(SD_BALANCE_WAKE) is sent through find_idlest_{group,queue} also if the
task doesn't fit the capacity of the previous cpu to allow it to escape
(override wake_affine) when necessary instead of relying on
periodic/idle/nohz_idle balance to eventually sort it out.

cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
8 years agosched: Store system-wide maximum cpu capacity in root domain
Dietmar Eggemann [Thu, 7 May 2015 17:46:15 +0000 (18:46 +0100)]
sched: Store system-wide maximum cpu capacity in root domain

To be able to compare the capacity of the target cpu with the highest
cpu capacity of the system in the wakeup path, store the system-wide
maximum cpu capacity in the root domain.

cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
8 years agoarm: Update arch_scale_cpu_capacity() to reflect change to define
Morten Rasmussen [Tue, 14 Apr 2015 15:25:31 +0000 (16:25 +0100)]
arm: Update arch_scale_cpu_capacity() to reflect change to define

arch_scale_cpu_capacity() is no longer a weak function but a #define
instead. Include the #define in topology.h.

cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
8 years agoarm64: Enable frequency invariant scheduler load-tracking support
Dietmar Eggemann [Fri, 25 Sep 2015 16:15:11 +0000 (17:15 +0100)]
arm64: Enable frequency invariant scheduler load-tracking support

Defines arch_scale_freq_capacity() to use cpufreq implementation.

Including <linux/cpufreq.h> in topology.h like for the arm arch doesn't
work because of CONFIG_COMPAT=y (Kernel support for 32-bit EL0).
That's why cpufreq_scale_freq_capacity() has to be declared extern in
topology.h.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
8 years agoarm: Enable frequency invariant scheduler load-tracking support
Dietmar Eggemann [Wed, 23 Sep 2015 11:47:48 +0000 (12:47 +0100)]
arm: Enable frequency invariant scheduler load-tracking support

Defines arch_scale_freq_capacity() to use cpufreq implementation.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
8 years agocpufreq: Frequency invariant scheduler load-tracking support
Dietmar Eggemann [Thu, 17 Sep 2015 15:10:56 +0000 (16:10 +0100)]
cpufreq: Frequency invariant scheduler load-tracking support

Implements cpufreq_scale_freq_capacity() to provide the scheduler with a
frequency scaling correction factor for more accurate load-tracking.

The factor is:

current_freq(cpu) << SCHED_CAPACITY_SHIFT / max_freq(cpu)

In fact, freq_scale should be a struct cpufreq_policy data member. But
this would require that the scheduler hot path (__update_load_avg()) would
have to grab the cpufreq lock. This can be avoided by using per-cpu data
initialized to SCHED_CAPACITY_SCALE for freq_scale.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
8 years agosched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task()
Yuyang Du [Wed, 16 Dec 2015 23:34:27 +0000 (07:34 +0800)]
sched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task()

If a newly created task is selected to go to a different CPU in fork
balance when it wakes up the first time, its load averages should
not be removed from the source CPU since they are never added to
it before. The same is also applicable to a never used group entity.

Fix it in remove_entity_load_avg(): when entity's last_update_time
is 0, simply return. This should precisely identify the case in
question, because in other migrations, the last_update_time is set
to 0 after remove_entity_load_avg().

Reported-by: Steve Muckle <steve.muckle@linaro.org>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
[peterz: cfs_rq_last_update_time]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <Juri.Lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20151216233427.GJ28098@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
8 years agoMerge remote-tracking branch 'lsk/linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4
Mark Brown [Fri, 18 Mar 2016 09:48:58 +0000 (09:48 +0000)]
Merge remote-tracking branch 'lsk/linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4

8 years agoMerge tag 'v4.4.5' into linux-linaro-lsk-v4.4
Mark Brown [Fri, 18 Mar 2016 09:45:54 +0000 (09:45 +0000)]
Merge tag 'v4.4.5' into linux-linaro-lsk-v4.4

This is the 4.4.5 stable release

# gpg: Signature made Wed 09 Mar 2016 23:36:03 GMT using RSA key ID 6092693E
# gpg: Good signature from "Greg Kroah-Hartman (Linux kernel stable release signing key) <greg@kroah.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 647F 2865 4894 E3BD 4571  99BE 38DB BDC8 6092 693E

8 years agoMerge remote-tracking branch 'lsk/v4.4/topic/ro-vdso' into linux-linaro-lsk-v4.4
Mark Brown [Thu, 17 Mar 2016 18:54:33 +0000 (18:54 +0000)]
Merge remote-tracking branch 'lsk/v4.4/topic/ro-vdso' into linux-linaro-lsk-v4.4

8 years agoARM/vdso: Mark the vDSO code read-only after init
David Brown [Wed, 16 Mar 2016 23:10:28 +0000 (17:10 -0600)]
ARM/vdso: Mark the vDSO code read-only after init

commit 11bf9b865898961cee60a41c483c9f27ec76e12e upstream.

Although the ARM vDSO is cleanly separated by code/data with the code
being read-only in userspace mappings, the code page is still writable
from the kernel.

There have been exploits (such as http://itszn.com/blog/?p=21) that
take advantage of this on x86 to go from a bad kernel write to full
root.

Prevent this specific exploit class on ARM as well by putting the vDSO
code page in post-init read-only memory as well.

Before:
vdso: 1 text pages at base 80927000
root@Vexpress:/ cat /sys/kernel/debug/kernel_page_tables
---[ Modules ]---
---[ Kernel Mapping ]---
0x80000000-0x80100000           1M     RW NX SHD
0x80100000-0x80600000           5M     ro x  SHD
0x80600000-0x80800000           2M     ro NX SHD
0x80800000-0xbe000000         984M     RW NX SHD

After:
vdso: 1 text pages at base 8072b000
root@Vexpress:/ cat /sys/kernel/debug/kernel_page_tables
---[ Modules ]---
---[ Kernel Mapping ]---
0x80000000-0x80100000           1M     RW NX SHD
0x80100000-0x80600000           5M     ro x  SHD
0x80600000-0x80800000           2M     ro NX SHD
0x80800000-0xbe000000         984M     RW NX SHD

Inspired by https://lkml.org/lkml/2016/1/19/494 based on work by the
PaX Team, Brad Spengler, and Kees Cook.

Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Lynch <nathan_lynch@mentor.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1455748879-21872-8-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agox86/vdso: Mark the vDSO code read-only after init
Kees Cook [Wed, 16 Mar 2016 23:10:27 +0000 (17:10 -0600)]
x86/vdso: Mark the vDSO code read-only after init

commit 018ef8dcf3de5f62e2cc1a9273cc27e1c6ba8de5 upstream.

The vDSO does not need to be writable after __init, so mark it as
__ro_after_init. The result kills the exploit method of writing to the
vDSO from kernel space resulting in userspace executing the modified code,
as shown here to bypass SMEP restrictions: http://itszn.com/blog/?p=21

The memory map (with added vDSO address reporting) shows the vDSO moving
into read-only memory:

Before:
[    0.143067] vDSO @ ffffffff82004000
[    0.143551] vDSO @ ffffffff82006000
---[ High Kernel Mapping ]---
0xffffffff80000000-0xffffffff81000000      16M                         pmd
0xffffffff81000000-0xffffffff81800000       8M   ro     PSE     GLB x  pmd
0xffffffff81800000-0xffffffff819f3000    1996K   ro             GLB x  pte
0xffffffff819f3000-0xffffffff81a00000      52K   ro                 NX pte
0xffffffff81a00000-0xffffffff81e00000       4M   ro     PSE     GLB NX pmd
0xffffffff81e00000-0xffffffff81e05000      20K   ro             GLB NX pte
0xffffffff81e05000-0xffffffff82000000    2028K   ro                 NX pte
0xffffffff82000000-0xffffffff8214f000    1340K   RW             GLB NX pte
0xffffffff8214f000-0xffffffff82281000    1224K   RW                 NX pte
0xffffffff82281000-0xffffffff82400000    1532K   RW             GLB NX pte
0xffffffff82400000-0xffffffff83200000      14M   RW     PSE     GLB NX pmd
0xffffffff83200000-0xffffffffc0000000     974M                         pmd

After:
[    0.145062] vDSO @ ffffffff81da1000
[    0.146057] vDSO @ ffffffff81da4000
---[ High Kernel Mapping ]---
0xffffffff80000000-0xffffffff81000000      16M                         pmd
0xffffffff81000000-0xffffffff81800000       8M   ro     PSE     GLB x  pmd
0xffffffff81800000-0xffffffff819f3000    1996K   ro             GLB x  pte
0xffffffff819f3000-0xffffffff81a00000      52K   ro                 NX pte
0xffffffff81a00000-0xffffffff81e00000       4M   ro     PSE     GLB NX pmd
0xffffffff81e00000-0xffffffff81e0b000      44K   ro             GLB NX pte
0xffffffff81e0b000-0xffffffff82000000    2004K   ro                 NX pte
0xffffffff82000000-0xffffffff8214c000    1328K   RW             GLB NX pte
0xffffffff8214c000-0xffffffff8227e000    1224K   RW                 NX pte
0xffffffff8227e000-0xffffffff82400000    1544K   RW             GLB NX pte
0xffffffff82400000-0xffffffff83200000      14M   RW     PSE     GLB NX pmd
0xffffffff83200000-0xffffffffc0000000     974M                         pmd

Based on work by PaX Team and Brad Spengler.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-7-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agolkdtm: Verify that '__ro_after_init' works correctly
Kees Cook [Wed, 16 Mar 2016 23:10:26 +0000 (17:10 -0600)]
lkdtm: Verify that '__ro_after_init' works correctly

commit 7cca071ccbd2a293ea69168ace6abbcdce53098e upstream.

The new __ro_after_init section should be writable before init, but
not after. Validate that it gets updated at init and can't be written
to afterwards.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-6-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoarch: Introduce post-init read-only memory
Kees Cook [Wed, 16 Mar 2016 23:10:25 +0000 (17:10 -0600)]
arch: Introduce post-init read-only memory

commit c74ba8b3480da6ddaea17df2263ec09b869ac496 upstream.

One of the easiest ways to protect the kernel from attack is to reduce
the internal attack surface exposed when a "write" flaw is available. By
making as much of the kernel read-only as possible, we reduce the
attack surface.

Many things are written to only during __init, and never changed
again. These cannot be made "const" since the compiler will do the wrong
thing (we do actually need to write to them). Instead, move these items
into a memory region that will be made read-only during mark_rodata_ro()
which happens after all kernel __init code has finished.

This introduces __ro_after_init as a way to mark such memory, and adds
some documentation about the existing __read_mostly marking.

This improves the security of the Linux kernel by marking formerly
read-write memory regions as read-only on a fully booted up system.

Based on work by PaX Team and Brad Spengler.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-5-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agox86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
Kees Cook [Wed, 16 Mar 2016 23:10:24 +0000 (17:10 -0600)]
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option

commit 9ccaf77cf05915f51231d158abfd5448aedde758 upstream.

This removes the CONFIG_DEBUG_RODATA option and makes it always enabled.

This simplifies the code and also makes it clearer that read-only mapped
memory is just as fundamental a security feature in kernel-space as it is
in user-space.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-4-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agomm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
Kees Cook [Wed, 16 Mar 2016 23:10:23 +0000 (17:10 -0600)]
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings

commit d2aa1acad22f1bdd0cfa67b3861800e392254454 upstream.

It may be useful to debug writes to the readonly sections of memory,
so provide a cmdline "rodata=off" to allow for this. This can be
expanded in the future to support "log" and "write" modes, but that
will need to be architecture-specific.

This also makes KDB software breakpoints more usable, as read-only
mappings can now be disabled on any kernel.

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-3-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years agoasm-generic: Consolidate mark_rodata_ro()
Kees Cook [Wed, 16 Mar 2016 23:10:22 +0000 (17:10 -0600)]
asm-generic: Consolidate mark_rodata_ro()

commit e267d97b83d9cecc16c54825f9f3ac7f72dc1e1e upstream.

Instead of defining mark_rodata_ro() in each architecture, consolidate it.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashok Kumar <ashoks@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Brown <david.brown@linaro.org>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Link: http://lkml.kernel.org/r/1455748879-21872-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
8 years ago Merge tag 'v4.4.6' into linux-linaro-lsk-v4.4
Alex Shi [Thu, 17 Mar 2016 04:51:14 +0000 (12:51 +0800)]
 Merge tag 'v4.4.6' into linux-linaro-lsk-v4.4

 This is the 4.4.6 stable release

8 years agoLinux 4.4.6
Greg Kroah-Hartman [Wed, 16 Mar 2016 15:43:17 +0000 (08:43 -0700)]
Linux 4.4.6

8 years agold-version: Fix awk regex compile failure
James Hogan [Tue, 8 Mar 2016 16:47:53 +0000 (16:47 +0000)]
ld-version: Fix awk regex compile failure

commit 4b7b1ef2c2f83d702272555e8adb839a50ba0f8e upstream.

The ld-version.sh script fails on some versions of awk with the
following error, resulting in build failures for MIPS:

awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(')

This is due to the regular expression ".*)", meant to strip off the
beginning of the ld version string up to the close bracket, however
brackets have a meaning in regular expressions, so lets escape it so
that awk doesn't expect a corresponding open bracket.

Fixes: ccbef1674a15 ("Kbuild, lto: add ld-version and ld-ifversion ...")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Michal Marek <mmarek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agotarget: Drop incorrect ABORT_TASK put for completed commands
Nicholas Bellinger [Sun, 6 Mar 2016 04:00:12 +0000 (20:00 -0800)]
target: Drop incorrect ABORT_TASK put for completed commands

commit 7f54ab5ff52fb0b91569bc69c4a6bc5cac1b768d upstream.

This patch fixes a recent ABORT_TASK regression associated
with commit febe562c, where a left-over target_put_sess_cmd()
would still be called when __target_check_io_state() detected
a command has already been completed, and explicit ABORT must
be avoided.

Note commit febe562c dropped the local kref_get_unless_zero()
check in core_tmr_abort_task(), but did not drop this extra
corresponding target_put_sess_cmd() in the failure path.

So go ahead and drop this now bogus target_put_sess_cmd(),
and avoid this potential use-after-free.

Reported-by: Dan Lane <dracodan@gmail.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoblock: don't optimize for non-cloned bio in bio_get_last_bvec()
Ming Lei [Sat, 12 Mar 2016 14:56:19 +0000 (22:56 +0800)]
block: don't optimize for non-cloned bio in bio_get_last_bvec()

commit 90d0f0f11588ec692c12f9009089b398be395184 upstream.

For !BIO_CLONED bio, we can use .bi_vcnt safely, but it
doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1]
because the start postion may have been moved in the middle of
the bvec, such as splitting in the middle of bvec.

Fixes: 7bcd79ac50d9(block: bio: introduce helpers to get the 1st and last bvec)
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoMIPS: smp.c: Fix uninitialised temp_foreign_map
James Hogan [Fri, 4 Mar 2016 10:10:51 +0000 (10:10 +0000)]
MIPS: smp.c: Fix uninitialised temp_foreign_map

commit d825c06bfe8b885b797f917ad47365d0e9c21fbb upstream.

When calculate_cpu_foreign_map() recalculates the cpu_foreign_map
cpumask it uses the local variable temp_foreign_map without initialising
it to zero. Since the calculation only ever sets bits in this cpumask
any existing bits at that memory location will remain set and find their
way into cpu_foreign_map too. This could potentially lead to cache
operations suboptimally doing smp calls to multiple VPEs in the same
core, even though the VPEs share primary caches.

Therefore initialise temp_foreign_map using cpumask_clear() before use.

Fixes: cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12759/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoMIPS: Fix build error when SMP is used without GIC
Hauke Mehrtens [Sun, 6 Mar 2016 21:28:56 +0000 (22:28 +0100)]
MIPS: Fix build error when SMP is used without GIC

commit 7a50e4688dabb8005df39b2b992d76629b8af8aa upstream.

The MIPS_GIC_IPI should only be selected when MIPS_GIC is also
selected, otherwise it results in a compile error. smp-gic.c uses some
functions from include/linux/irqchip/mips-gic.h like
plat_ipi_call_int_xlate() which are only added to the header file when
MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP.
The calls top the functions from smp-gic.c are already protected by
some #ifdefs

The first part of this was introduced in commit 72e20142b2bf ("MIPS:
Move GIC IPI functions out of smp-cmp.c")

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12774/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoovl: fix getcwd() failure after unsuccessful rmdir
Rui Wang [Fri, 8 Jan 2016 15:09:59 +0000 (23:09 +0800)]
ovl: fix getcwd() failure after unsuccessful rmdir

commit ce9113bbcbf45a57c082d6603b9a9f342be3ef74 upstream.

ovl_remove_upper() should do d_drop() only after it successfully
removes the dir, otherwise a subsequent getcwd() system call will
fail, breaking userspace programs.

This is to fix: https://bugzilla.kernel.org/show_bug.cgi?id=110491

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoovl: copy new uid/gid into overlayfs runtime inode
Konstantin Khlebnikov [Sun, 31 Jan 2016 13:21:29 +0000 (16:21 +0300)]
ovl: copy new uid/gid into overlayfs runtime inode

commit b81de061fa59f17d2730aabb1b84419ef3913810 upstream.

Overlayfs must update uid/gid after chown, otherwise functions
like inode_owner_or_capable() will check user against stale uid.
Catched by xfstests generic/087, it chowns file and calls utimes.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agouserfaultfd: don't block on the last VM updates at exit time
Linus Torvalds [Tue, 1 Mar 2016 19:56:22 +0000 (11:56 -0800)]
userfaultfd: don't block on the last VM updates at exit time

commit 39680f50ae54cbbb6e72ac38b8329dd3eb9105f4 upstream.

The exit path will do some final updates to the VM of an exiting process
to inform others of the fact that the process is going away.

That happens, for example, for robust futex state cleanup, but also if
the parent has asked for a TID update when the process exits (we clear
the child tid field in user space).

However, at the time we do those final VM accesses, we've already
stopped accepting signals, so the usual "stop waiting for userfaults on
signal" code in fs/userfaultfd.c no longer works, and the process can
become an unkillable zombie waiting for something that will never
happen.

To solve this, just make handle_userfault() abort any user fault
handling if we're already in the exit path past the signal handling
state being dead (marked by PF_EXITING).

This VM special case is pretty ugly, and it is possible that we should
look at finalizing signals later (or move the VM final accesses
earlier).  But in the meantime this is a fairly minimally intrusive fix.

Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agopowerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
Russell Currey [Wed, 13 Jan 2016 01:04:32 +0000 (12:04 +1100)]
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages

commit c88c5d43732a0356f99e5e4d1ad62ab1ea516b81 upstream.

The recently added OPAL API call, OPAL_CONSOLE_FLUSH, originally took no
parameters and returned nothing.  The call was updated to accept the
terminal number to flush, and returned various values depending on the
state of the output buffer.

The prototype has been updated and its usage in the OPAL kmsg dumper has
been modified to support its new behaviour as an incremental flush.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agopowerpc/powernv: Add a kmsg_dumper that flushes console output on panic
Russell Currey [Fri, 27 Nov 2015 06:23:07 +0000 (17:23 +1100)]
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic

commit affddff69c55eb68969448f35f59054a370bc7c1 upstream.

On BMC machines, console output is controlled by the OPAL firmware and is
only flushed when its pollers are called.  When the kernel is in a panic
state, it no longer calls these pollers and thus console output does not
completely flush, causing some output from the panic to be lost.

Output is only actually lost when the kernel is configured to not power off
or reboot after panic (i.e. CONFIG_PANIC_TIMEOUT is set to 0) since OPAL
flushes the console buffer as part of its power down routines.  Before this
patch, however, only partial output would be printed during the timeout wait.

This patch adds a new kmsg_dumper which gets called at panic time to ensure
panic output is not lost.  It accomplishes this by calling OPAL_CONSOLE_FLUSH
in the OPAL API, and if that is not available, the pollers are called enough
times to (hopefully) completely flush the buffer.

The flushing mechanism will only affect output printed at and before the
kmsg_dump call in kernel/panic.c:panic().  As such, the "end Kernel panic"
message may still be truncated as follows:

>Call Trace:
>[c000000f1f603b00] [c0000000008e9458] dump_stack+0x90/0xbc (unreliable)
>[c000000f1f603b30] [c0000000008e7e78] panic+0xf8/0x2c4
>[c000000f1f603bc0] [c000000000be4860] mount_block_root+0x288/0x33c
>[c000000f1f603c80] [c000000000be4d14] prepare_namespace+0x1f4/0x254
>[c000000f1f603d00] [c000000000be43e8] kernel_init_freeable+0x318/0x350
>[c000000f1f603dc0] [c00000000000bd74] kernel_init+0x24/0x130
>[c000000f1f603e30] [c0000000000095b0] ret_from_kernel_thread+0x5c/0xac
>---[ end Kernel panic - not

This functionality is implemented as a kmsg_dumper as it seems to be the
most sensible way to introduce platform-specific functionality to the
panic function.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agopowerpc: Fix dedotify for binutils >= 2.26
Andreas Schwab [Fri, 5 Feb 2016 18:50:03 +0000 (19:50 +0100)]
powerpc: Fix dedotify for binutils >= 2.26

commit f15838e9cac8f78f0cc506529bb9d3b9fa589c1f upstream.

Since binutils 2.26 BFD is doing suffix merging on STRTAB sections.  But
dedotify modifies the symbol names in place, which can also modify
unrelated symbols with a name that matches a suffix of a dotted name.  To
remove the leading dot of a symbol name we can just increment the pointer
into the STRTAB section instead.

Backport to all stables to avoid breakage when people update their
binutils - mpe.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoRevert "drm/radeon/pm: adjust display configuration after powerstate"
Alex Deucher [Tue, 8 Mar 2016 16:31:00 +0000 (11:31 -0500)]
Revert "drm/radeon/pm: adjust display configuration after powerstate"

commit d74e766e1916d0e09b86e4b5b9d0f819628fd546 upstream.

This reverts commit 39d4275058baf53e89203407bf3841ff2c74fa32.

This caused a regression on some older hardware.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=113891

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agodrm/radeon: Fix error handling in radeon_flip_work_func.
Mario Kleiner [Tue, 1 Mar 2016 20:31:17 +0000 (21:31 +0100)]
drm/radeon: Fix error handling in radeon_flip_work_func.

commit 1e1490a38504419e349caa1b7d55d5c141a9bccb upstream.

This is a port of the patch "drm/amdgpu: Fix error handling in amdgpu_flip_work_func."
to fix the following problem for radeon as well which was
reported against amdgpu:

The patch e1d09dc0ccc6: "drm/amdgpu: Don't hang in
amdgpu_flip_work_func on disabled crtc." from Feb 19, 2016, leads to
the following static checker warning, as reported by Dan Carpenter in
https://lists.freedesktop.org/archives/dri-devel/2016-February/101987.html

drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:127 amdgpu_flip_work_func()     warn: should this be 'repcnt == -1'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'spin_lock:&crtc->dev->event_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'irqsave:flags'

This patch fixes both reported problems:

Change post-decrement of repcnt to pre-decrement, so
it can't underflow anymore, but still performs up to
three repetitions - three is the maximum one could
expect in practice.

Move the spin_unlock_irqrestore to where it actually
belongs.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agodrm/amdgpu: Fix error handling in amdgpu_flip_work_func.
Mario Kleiner [Tue, 1 Mar 2016 20:31:16 +0000 (21:31 +0100)]
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.

commit 90e94b160c7f647ddffda707f5e3c0c66c170df8 upstream.

The patch e1d09dc0ccc6: "drm/amdgpu: Don't hang in
amdgpu_flip_work_func on disabled crtc." from Feb 19, 2016, leads to
the following static checker warning, as reported by Dan Carpenter in
https://lists.freedesktop.org/archives/dri-devel/2016-February/101987.html

drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:127 amdgpu_flip_work_func() warn: should this be 'repcnt == -1'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'spin_lock:&crtc->dev->event_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:136 amdgpu_flip_work_func() error: double unlock 'irqsave:flags'

This patch fixes both reported problems:

Change post-decrement of repcnt to pre-decrement, so
it can't underflow anymore, but still performs up to
three repetitions - three is the maximum one could
expect in practice.

Move the spin_unlock_irqrestore to where it actually
belongs.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoRevert "drm/radeon: call hpd_irq_event on resume"
Linus Torvalds [Mon, 7 Mar 2016 21:15:09 +0000 (13:15 -0800)]
Revert "drm/radeon: call hpd_irq_event on resume"

commit 256faedcfd646161477d47a1a78c32a562d2e845 upstream.

This reverts commit dbb17a21c131eca94eb31136eee9a7fe5aff00d9.

It turns out that commit can cause problems for systems with multiple
GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid
graphics.

This got noticed originally in 4.4.4, where this patch had already
gotten back-ported, but 4.5-rc7 was verified to have the same problem.

Alexander Deucher says:
 "It looks like you have a muxed system so I suspect what's happening is
  that one of the display is being reported as connected for both the
  IGP and the dGPU and then the desktop environment gets confused or
  there some sort problem in the detect functions since the mux is not
  switched to the dGPU.  I don't see an easy fix unless Dave has any
  ideas.  I'd say just revert for now"

Reported-by: Jörg-Volker Peetz <jvpeetz@web.de>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agox86/mm: Fix slow_virt_to_phys() for X86_PAE again
Dexuan Cui [Thu, 25 Feb 2016 09:58:12 +0000 (01:58 -0800)]
x86/mm: Fix slow_virt_to_phys() for X86_PAE again

commit bf70e5513dfea29c3682e7eb3dbb45f0723bac09 upstream.

"d1cd12108346: x86, pageattr: Prevent overflow in slow_virt_to_phys() for
X86_PAE" was unintentionally removed by the recent "34437e67a672: x86/mm: Fix
slow_virt_to_phys() to handle large PAT bit".

And, the variable 'phys_addr' was defined as "unsigned long" by mistake -- it should
be "phys_addr_t".

As a result, Hyper-V network driver in 32-PAE Linux guest can't work again.

Fixes: commit 34437e67a672: "x86/mm: Fix slow_virt_to_phys() to handle large PAT bit"
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Cc: olaf@aepfle.de
Cc: jasowang@redhat.com
Cc: driverdev-devel@linuxdriverproject.org
Cc: linux-mm@kvack.org
Cc: apw@canonical.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Link: http://lkml.kernel.org/r/1456394292-9030-1-git-send-email-decui@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agogpu: ipu-v3: Do not bail out on missing optional port nodes
Philipp Zabel [Mon, 4 Jan 2016 16:32:26 +0000 (17:32 +0100)]
gpu: ipu-v3: Do not bail out on missing optional port nodes

commit 17e0521750399205f432966e602e125294879cdd upstream.

The port nodes are documented as optional, treat them accordingly.

Reported-by: Martin Fuzzey <mfuzzey@parkeon.com>
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes: 304e6be652e2 ("gpu: ipu-v3: Assign of_node of child platform devices to corresponding ports")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomac80211: Fix Public Action frame RX in AP mode
Jouni Malinen [Mon, 29 Feb 2016 22:29:00 +0000 (00:29 +0200)]
mac80211: Fix Public Action frame RX in AP mode

commit 1ec7bae8bec9b72e347e01330c745ab5cdd66f0e upstream.

Public Action frames use special rules for how the BSSID field (Address
3) is set. A wildcard BSSID is used in cases where the transmitter and
recipient are not members of the same BSS. As such, we need to accept
Public Action frames with wildcard BSSID.

Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when
operating as AP") added a rule that drops Action frames to TDLS-peers
based on an Action frame having different DA (Address 1) and BSSID
(Address 3) values. This is not correct since it misses the possibility
of BSSID being a wildcard BSSID in which case the Address 1 would not
necessarily match.

Fix this by allowing mac80211 to accept wildcard BSSID in an Action
frame when in AP mode.

Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomac80211: check PN correctly for GCMP-encrypted fragmented MPDUs
Johannes Berg [Fri, 26 Feb 2016 21:13:40 +0000 (22:13 +0100)]
mac80211: check PN correctly for GCMP-encrypted fragmented MPDUs

commit 9acc54beb474c81148e2946603d141cf8716b19f upstream.

Just like for CCMP we need to check that for GCMP the fragments
have PNs that increment by one; the spec was updated to fix this
security issue and now has the following text:

The receiver shall discard MSDUs and MMPDUs whose constituent
MPDU PN values are not incrementing in steps of 1.

Adapt the code for CCMP to work for GCMP as well, luckily the
relevant fields already alias each other so no code duplication
is needed (just check the aliasing with BUILD_BUG_ON.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomac80211: minstrel_ht: fix a logic error in RTS/CTS handling
Felix Fietkau [Wed, 24 Feb 2016 11:07:17 +0000 (12:07 +0100)]
mac80211: minstrel_ht: fix a logic error in RTS/CTS handling

commit c36dd3eaf1a674a45b58b922258d6eaa8932e292 upstream.

RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's
a dual-stream rate and the sta is in dynamic SMPS mode.

Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS")
Reported-by: Matías Richart <mrichart@fing.edu.uy>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomac80211: minstrel_ht: set default tx aggregation timeout to 0
Felix Fietkau [Thu, 18 Feb 2016 18:49:18 +0000 (19:49 +0100)]
mac80211: minstrel_ht: set default tx aggregation timeout to 0

commit 7a36b930e6ed4702c866dc74a5ad07318a57c688 upstream.

The value 5000 was put here with the addition of the timeout field to
ieee80211_start_tx_ba_session. It was originally added in mac80211 to
save resources for drivers like iwlwifi, which only supports a limited
number of concurrent aggregation sessions.

Since iwlwifi does not use minstrel_ht and other drivers don't need
this, 0 is a better default - especially since there have been
recent reports of aggregation setup related issues reproduced with
ath9k. This should improve stability without causing any adverse
effects.

Acked-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomac80211: fix use of uninitialised values in RX aggregation
Chris Bainbridge [Wed, 27 Jan 2016 15:46:18 +0000 (15:46 +0000)]
mac80211: fix use of uninitialised values in RX aggregation

commit f39ea2690bd61efec97622c48323f40ed6e16317 upstream.

Use kzalloc instead of kmalloc for struct tid_ampdu_rx to
initialize the "removed" field (all others are initialized
manually). That fixes:

UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29
load of value 2 is not a valid value for type '_Bool'
CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265
Workqueue: phy0 rt2x00usb_work_rxdone
 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007
 ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500
 ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032
Call Trace:
 [<ffffffff8181d866>] dump_stack+0x45/0x5f
 [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40
 [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70
 [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730
 [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00
 [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750
 [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990

While at it, convert to use sizeof(*tid_agg_rx) instead.

Fixes: 788211d81bfdf ("mac80211: fix RX A-MPDU session reorder timer deletion")
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
[reword commit message, use sizeof(*tid_agg_rx)]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomac80211: minstrel: Change expected throughput unit back to Kbps
Sven Eckelmann [Tue, 2 Feb 2016 07:12:26 +0000 (08:12 +0100)]
mac80211: minstrel: Change expected throughput unit back to Kbps

commit 212c5a5e6ba61678be6b5fee576e38bccb50b613 upstream.

The change from cur_tp to the function
minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the
current throughput. For example in minstrel_ht the correct
conversion between them would be:

    mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..).

This factor 10 must also be included in the calculation of
minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to
return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing
algorithms like B.A.T.M.A.N. V will make incorrect decision based on these
values. Its kernel based implementation expects expected_throughput always
to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps].

The same requirement has iw or olsrdv2's nl80211 based statistics module
which retrieve the same data via NL80211_STA_INFO_TX_BITRATE.

Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function")
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoiwlwifi: mvm: inc pending frames counter also when txing non-sta
Liad Kaufman [Sun, 14 Feb 2016 13:32:58 +0000 (15:32 +0200)]
iwlwifi: mvm: inc pending frames counter also when txing non-sta

commit fb896c44f88a75843a072cd6961b1615732f7811 upstream.

Until this patch, when TXing non-sta the pending_frames counter
wasn't increased, but it WAS decreased in
iwl_mvm_rx_tx_cmd_single(), what makes it negative in certain
conditions. This in turn caused much trouble when we need to
remove the station since we won't be waiting forever until
pending_frames gets 0. In certain cases, we were exhausting
the station table even in BSS mode, because we had a lot of
stale stations.

Increase the counter also in iwl_mvm_tx_skb_non_sta() after a
successful TX to avoid this outcome.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agocan: gs_usb: fixed disconnect bug by removing erroneous use of kfree()
Maximilain Schneider [Tue, 23 Feb 2016 01:17:28 +0000 (01:17 +0000)]
can: gs_usb: fixed disconnect bug by removing erroneous use of kfree()

commit e9a2d81b1761093386a0bb8a4f51642ac785ef63 upstream.

gs_destroy_candev() erroneously calls kfree() on a struct gs_can *, which is
allocated through alloc_candev() and should instead be freed using
free_candev() alone.

The inappropriate use of kfree() causes the kernel to hang when
gs_destroy_candev() is called.

Only the struct gs_usb * which is allocated through kzalloc() should be freed
using kfree() when the device is disconnected.

Signed-off-by: Maximilian Schneider <max@schneidersoft.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agocfg80211/wext: fix message ordering
Johannes Berg [Wed, 27 Jan 2016 12:29:34 +0000 (13:29 +0100)]
cfg80211/wext: fix message ordering

commit cb150b9d23be6ee7f3a0fff29784f1c5b5ac514d upstream.

Since cfg80211 frequently takes actions from its netdev notifier
call, wireless extensions messages could still be ordered badly
since the wext netdev notifier, since wext is built into the
kernel, runs before the cfg80211 netdev notifier. For example,
the following can happen:

5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
    link/ether

when setting the interface down causes the wext message.

To also fix this, export the wireless_nlevent_flush() function
and also call it from the cfg80211 notifier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agowext: fix message delay/ordering
Johannes Berg [Wed, 27 Jan 2016 11:37:52 +0000 (12:37 +0100)]
wext: fix message delay/ordering

commit 8bf862739a7786ae72409220914df960a0aa80d8 upstream.

Beniamino reported that he was getting an RTM_NEWLINK message for a
given interface, after the RTM_DELLINK for it. It turns out that the
message is a wireless extensions message, which was sent because the
interface had been connected and disconnection while it was deleted
caused a wext message.

For its netlink messages, wext uses RTM_NEWLINK, but the message is
without all the regular rtnetlink attributes, so "ip monitor link"
prints just rudimentary information:

5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
Deleted 5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
    link/ether
(from my hwsim reproduction)

This can cause userspace to get confused since it doesn't expect an
RTM_NEWLINK message after RTM_DELLINK.

The reason for this is that wext schedules a worker to send out the
messages, and the scheduling delay can cause the messages to get out
to userspace in different order.

To fix this, have wext register a netdevice notifier and flush out
any pending messages when netdevice state changes. This fixes any
ordering whenever the original message wasn't sent by a notifier
itself.

Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoovl: fix working on distributed fs as lower layer
Konstantin Khlebnikov [Sun, 31 Jan 2016 13:22:16 +0000 (16:22 +0300)]
ovl: fix working on distributed fs as lower layer

commit b5891cfab08fe3144a616e8e734df7749fb3b7d0 upstream.

This adds missing .d_select_inode into alternative dentry_operations.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Fixes: 7c03b5d45b8e ("ovl: allow distributed fs as lower layer")
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Tested-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoovl: ignore lower entries when checking purity of non-directory entries
Konstantin Khlebnikov [Sun, 31 Jan 2016 13:17:53 +0000 (16:17 +0300)]
ovl: ignore lower entries when checking purity of non-directory entries

commit 45d11738969633ec07ca35d75d486bf2d8918df6 upstream.

After rename file dentry still holds reference to lower dentry from
previous location. This doesn't matter for data access because data comes
from upper dentry. But this stale lower dentry taints dentry at new
location and turns it into non-pure upper. Such file leaves visible
whiteout entry after remove in directory which shouldn't have whiteouts at
all.

Overlayfs already tracks pureness of file location in oe->opaque.  This
patch just uses that for detecting actual path type.

Comment from Vivek Goyal's patch:

Here are the details of the problem. Do following.

$ mkdir upper lower work merged upper/dir/
$ touch lower/test
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=
work merged
$ mv merged/test merged/dir/
$ rm merged/dir/test
$ ls -l merged/dir/
/usr/bin/ls: cannot access merged/dir/test: No such file or directory
total 0
c????????? ? ? ? ?            ? test

Basic problem seems to be that once a file has been unlinked, a whiteout
has been left behind which was not needed and hence it becomes visible.

Whiteout is visible because parent dir is of not type MERGE, hence
od->is_real is set during ovl_dir_open(). And that means ovl_iterate()
passes on iterate handling directly to underlying fs. Underlying fs does
not know/filter whiteouts so it becomes visible to user.

Why did we leave a whiteout to begin with when we should not have.
ovl_do_remove() checks for OVL_TYPE_PURE_UPPER() and does not leave
whiteout if file is pure upper. In this case file is not found to be pure
upper hence whiteout is left.

So why file was not PURE_UPPER in this case? I think because dentry is
still carrying some leftover state which was valid before rename. For
example, od->numlower was set to 1 as it was a lower file. After rename,
this state is not valid anymore as there is no such file in lower.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Viktor Stanchev <me@viktorstanchev.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=109611
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoASoC: wm8958: Fix enum ctl accesses in a wrong type
Takashi Iwai [Mon, 29 Feb 2016 17:01:12 +0000 (18:01 +0100)]
ASoC: wm8958: Fix enum ctl accesses in a wrong type

commit d0784829ae3b0beeb69b476f017d5c8a2eb95198 upstream.

"MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in
wm8958 codec driver are enum, while the current driver accesses
wrongly via value.integer.value[].  They have to be via
value.enumerated.item[] instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoASoC: wm8994: Fix enum ctl accesses in a wrong type
Takashi Iwai [Mon, 29 Feb 2016 17:01:15 +0000 (18:01 +0100)]
ASoC: wm8994: Fix enum ctl accesses in a wrong type

commit 8019c0b37cd5a87107808300a496388b777225bf upstream.

The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in
wm8994 codec driver are enum ctls, while the current driver accesses
wrongly via value.integer.value[].  They have to be via
value.enumerated.item[] instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoASoC: samsung: Use IRQ safe spin lock calls
Charles Keepax [Thu, 18 Feb 2016 15:47:13 +0000 (15:47 +0000)]
ASoC: samsung: Use IRQ safe spin lock calls

commit 316fa9e09ad76e095b9d7e9350c628b918370a22 upstream.

Lockdep warns of a potential lock inversion, i2s->lock is held numerous
times whilst we are under the substream lock (snd_pcm_stream_lock). If
we use the IRQ unsafe spin lock calls, you can also end up locking
snd_pcm_stream_lock whilst under i2s->lock (if an IRQ happens whilst we
are holding i2s->lock). This could result in deadlock.

[   18.147001]        CPU0                    CPU1
[   18.151509]        ----                    ----
[   18.156022]   lock(&(&pri_dai->spinlock)->rlock);
[   18.160701]                                local_irq_disable();
[   18.166622]                                lock(&(&substream->self_group.lock)->rlock);
[   18.174595]                                lock(&(&pri_dai->spinlock)->rlock);
[   18.181806]   <Interrupt>
[   18.184408]     lock(&(&substream->self_group.lock)->rlock);
[   18.190045]
[   18.190045]  *** DEADLOCK ***

This patch changes to using the irq safe spinlock calls, to avoid this
issue.

Fixes: ce8bcdbb61d9 ("ASoC: samsung: i2s: Protect more registers with a spinlock")
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoASoC: dapm: Fix ctl value accesses in a wrong type
Takashi Iwai [Mon, 29 Feb 2016 16:20:48 +0000 (17:20 +0100)]
ASoC: dapm: Fix ctl value accesses in a wrong type

commit 741338f99f16dc24d2d01ac777b0798ae9d10a90 upstream.

snd_soc_dapm_dai_link_get() and _put() access the associated ctl
values as value.integer.value[].  However, this is an enum ctl, and it
has to be accessed via value.enumerated.item[].  The former is long
while the latter is unsigned int, so they don't align.

Fixes: c66150824b8a ('ASoC: dapm: add code to configure dai link parameters')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoncpfs: fix a braino in OOM handling in ncp_fill_cache()
Al Viro [Tue, 8 Mar 2016 03:17:07 +0000 (22:17 -0500)]
ncpfs: fix a braino in OOM handling in ncp_fill_cache()

commit 803c00123a8012b3a283c0530910653973ef6d8f upstream.

Failing to allocate an inode for child means that cache for *parent* is
incompletely populated.  So it's parent directory inode ('dir') that
needs NCPI_DIR_CACHE flag removed, *not* the child inode ('inode', which
is what we'd failed to allocate in the first place).

Fucked-up-in: commit 5e993e25 ("ncpfs: get rid of d_validate() nonsense")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agojffs2: reduce the breakage on recovery from halfway failed rename()
Al Viro [Tue, 8 Mar 2016 04:07:10 +0000 (23:07 -0500)]
jffs2: reduce the breakage on recovery from halfway failed rename()

commit f93812846f31381d35c04c6c577d724254355e7f upstream.

d_instantiate(new_dentry, old_inode) is absolutely wrong thing to
do - it will oops if new_dentry used to be positive, for starters.
What we need is d_invalidate() the target and be done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agodmaengine: at_xdmac: fix residue computation
Ludovic Desroches [Thu, 10 Mar 2016 09:17:55 +0000 (10:17 +0100)]
dmaengine: at_xdmac: fix residue computation

commit 25c5e9626ca4d40928dc9c44f009ce2ed0a739e7 upstream.

When computing the residue we need two pieces of information: the current
descriptor and the remaining data of the current descriptor. To get
that information, we need to read consecutively two registers but we
can't do it in an atomic way. For that reason, we have to check manually
that current descriptor has not changed.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Suggested-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: David Engraf <david.engraf@sysgo.com>
Tested-by: David Engraf <david.engraf@sysgo.com>
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel
eXtended DMA Controller driver")
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agotracing: Fix check for cpu online when event is disabled
Steven Rostedt (Red Hat) [Wed, 9 Mar 2016 16:58:41 +0000 (11:58 -0500)]
tracing: Fix check for cpu online when event is disabled

commit dc17147de328a74bbdee67c1bf37d2f1992de756 upstream.

Commit f37755490fe9b ("tracepoints: Do not trace when cpu is offline") added
a check to make sure that tracepoints only get called when the cpu is
online, as it uses rcu_read_lock_sched() for protection.

Commit 3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints
are disabled") added lockdep checks (including rcu checks) for events that
are not enabled to catch possible RCU issues that would only be triggered if
a trace event was enabled. Commit f37755490fe9b only stopped the warnings
when the trace event was enabled but did not prevent warnings if the trace
event was called when disabled.

To fix this, the cpu online check is moved to where the condition is added
to the trace event. This will place the cpu online check in all places that
it may be used now and in the future.

Fixes: f37755490fe9b ("tracepoints: Do not trace when cpu is offline")
Fixes: 3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints are disabled")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agos390/dasd: fix diag 0x250 inline assembly
Heiko Carstens [Tue, 1 Mar 2016 11:58:06 +0000 (12:58 +0100)]
s390/dasd: fix diag 0x250 inline assembly

commit ce0c12b633846a47e103842149a5bac2e5d261ec upstream.

git commit 1ec2772e0c3c ("s390/diag: add a statistic for diagnose
calls") added function calls to gather diagnose statistics.

In case of the dasd diag driver the function call was added between a
register asm statement which initialized register r2 and the inline
assembly itself.  The function call clobbers the contents of register
r2 and therefore the diag 0x250 call behaves in a more or less random
way.

Fix this by extracting the function call into a separate function like
we do everywhere else.

Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Reported-and-tested-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agos390/mm: four page table levels vs. fork
Martin Schwidefsky [Mon, 15 Feb 2016 13:46:49 +0000 (14:46 +0100)]
s390/mm: four page table levels vs. fork

commit 3446c13b268af86391d06611327006b059b8bab1 upstream.

The fork of a process with four page table levels is broken since
git commit 6252d702c5311ce9 "[S390] dynamic page tables."

All new mm contexts are created with three page table levels and
an asce limit of 4TB. If the parent has four levels dup_mmap will
add vmas to the new context which are outside of the asce limit.
The subsequent call to copy_page_range will walk the three level
page table structure of the new process with non-zero pgd and pud
indexes. This leads to memory clobbers as the pgd_index *and* the
pud_index is added to the mm->pgd pointer without a pgd_deref
in between.

The init_new_context() function is selecting the number of page
table levels for a new context. The function is used by mm_init()
which in turn is called by dup_mm() and mm_alloc(). These two are
used by fork() and exec(). The init_new_context() function can
distinguish the two cases by looking at mm->context.asce_limit,
for fork() the mm struct has been copied and the number of page
table levels may not change. For exec() the mm_alloc() function
set the new mm structure to zero, in this case a three-level page
table is created as the temporary stack space is located at
STACK_TOP_MAX = 4TB.

This fixes CVE-2016-2143.

Reported-by: Marcin Kościelnicki <koriakin@0x04.net>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoKVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
Paolo Bonzini [Wed, 9 Mar 2016 13:28:02 +0000 (14:28 +0100)]
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0

commit 5f0b819995e172f48fdcd91335a2126ba7d9deae upstream.

KVM has special logic to handle pages with pte.u=1 and pte.w=0 when
CR0.WP=1.  These pages' SPTEs flip continuously between two states:
U=1/W=0 (user and supervisor reads allowed, supervisor writes not allowed)
and U=0/W=1 (supervisor reads and writes allowed, user writes not allowed).

When SMEP is in effect, however, U=0 will enable kernel execution of
this page.  To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0, making the two states U=1/W=0/NX=gpte.NX and U=0/W=1/NX=1.
When guest EFER has the NX bit cleared, the reserved bit check thinks
that the latter state is invalid; teach it that the smep_andnot_wp case
will also use the NX bit of SPTEs.

Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.inel.com>
Fixes: c258b62b264fdc469b6d3610a907708068145e3b
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoKVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
Paolo Bonzini [Tue, 8 Mar 2016 11:13:39 +0000 (12:13 +0100)]
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo

commit 844a5fe219cf472060315971e15cbf97674a3324 upstream.

Yes, all of these are needed. :) This is admittedly a bit odd, but
kvm-unit-tests access.flat tests this if you run it with "-cpu host"
and of course ept=0.

KVM runs the guest with CR0.WP=1, so it must handle supervisor writes
specially when pte.u=1/pte.w=0/CR0.WP=0.  Such writes cause a fault
when U=1 and W=0 in the SPTE, but they must succeed because CR0.WP=0.
When KVM gets the fault, it sets U=0 and W=1 in the shadow PTE and
restarts execution.  This will still cause a user write to fault, while
supervisor writes will succeed.  User reads will fault spuriously now,
and KVM will then flip U and W again in the SPTE (U=1, W=0).  User reads
will be enabled and supervisor writes disabled, going back to the
originary situation where supervisor writes fault spuriously.

When SMEP is in effect, however, U=0 will enable kernel execution of
this page.  To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0.  If the guest has not enabled NX, the result is a continuous
stream of page faults due to the NX bit being reserved.

The fix is to force EFER.NX=1 even if the CPU is taking care of the EFER
switch.  (All machines with SMEP have the CPU_LOAD_IA32_EFER vm-entry
control, so they do not use user-return notifiers for EFER---if they did,
EFER.NX would be forced to the same value as the host).

There is another bug in the reserved bit check, which I've split to a
separate patch for easier application to stable kernels.

Cc: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Fixes: f6577a5fa15d82217ca73c74cd2dcbc0f6c781dd
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoKVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
Paul Mackerras [Sat, 5 Mar 2016 08:34:39 +0000 (19:34 +1100)]
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit

commit ccec44563b18a0ce90e2d4f332784b3cb25c8e9c upstream.

Thomas Huth discovered that a guest could cause a hard hang of a
host CPU by setting the Instruction Authority Mask Register (IAMR)
to a suitable value.  It turns out that this is because when the
code was added to context-switch the new special-purpose registers
(SPRs) that were added in POWER8, we forgot to add code to ensure
that they were restored to a sane value on guest exit.

This adds code to set those registers where a bad value could
compromise the execution of the host kernel to a suitable neutral
value on guest exit.

Fixes: b005255e12a3
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoKVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
David Hildenbrand [Tue, 8 Mar 2016 11:24:30 +0000 (12:24 +0100)]
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS

commit 9522b37f5a8c7bfabe46eecadf2e130f1103f337 upstream.

With MACHINE_HAS_VX, we convert the floating point registers from the
vector registeres when storing the status. For other VCPUs, these are
stored to vcpu->run->s.regs.vrs, but we are using current->thread.fpu.vxrs,
which resolves to the currently loaded VCPU.

So kvm_s390_store_status_unloaded() currently writes the wrong floating
point registers (converted from the vector registers) when called from
another VCPU on a z13.

This is only the case for old user space not handling SIGP STORE STATUS and
SIGP STOP AND STORE STATUS, but relying on the kernel implementation. All
other calls come from the loaded VCPU via kvm_s390_store_status().

Fixes: 9abc2a08a7d6 (KVM: s390: fix memory overwrites when vx is disabled)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoKVM: VMX: disable PEBS before a guest entry
Radim Krčmář [Fri, 4 Mar 2016 14:08:42 +0000 (15:08 +0100)]
KVM: VMX: disable PEBS before a guest entry

commit 7099e2e1f4d9051f31bbfa5803adf954bb5d76ef upstream.

Linux guests on Haswell (and also SandyBridge and Broadwell, at least)
would crash if you decided to run a host command that uses PEBS, like
  perf record -e 'cpu/mem-stores/pp' -a

This happens because KVM is using VMX MSR switching to disable PEBS, but
SDM [2015-12] 18.4.4.4 Re-configuring PEBS Facilities explains why it
isn't safe:
  When software needs to reconfigure PEBS facilities, it should allow a
  quiescent period between stopping the prior event counting and setting
  up a new PEBS event. The quiescent period is to allow any latent
  residual PEBS records to complete its capture at their previously
  specified buffer address (provided by IA32_DS_AREA).

There might not be a quiescent period after the MSR switch, so a CPU
ends up using host's MSR_IA32_DS_AREA to access an area in guest's
memory.  (Or MSR switching is just buggy on some models.)

The guest can learn something about the host this way:
If the guest doesn't map address pointed by MSR_IA32_DS_AREA, it results
in #PF where we leak host's MSR_IA32_DS_AREA through CR2.

After that, a malicious guest can map and configure memory where
MSR_IA32_DS_AREA is pointing and can therefore get an output from
host's tracing.

This is not a critical leak as the host must initiate with PEBS tracing
and I have not been able to get a record from more than one instruction
before vmentry in vmx_vcpu_run() (that place has most registers already
overwritten with guest's).

We could disable PEBS just few instructions before vmentry, but
disabling it earlier shouldn't affect host tracing too much.
We also don't need to switch MSR_IA32_PEBS_ENABLE on VMENTRY, but that
optimization isn't worth its code, IMO.

(If you are implementing PEBS for guests, be sure to handle the case
 where both host and guest enable PEBS, because this patch doesn't.)

Fixes: 26a4f3c08de4 ("perf/x86: disable PEBS on a guest entry.")
Reported-by: Jiří Olša <jolsa@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agokvm: cap halt polling at exactly halt_poll_ns
David Matlack [Wed, 9 Mar 2016 00:19:44 +0000 (16:19 -0800)]
kvm: cap halt polling at exactly halt_poll_ns

commit 313f636d5c490c9741d3f750dc8da33029edbc6b upstream.

When growing halt-polling, there is no check that the poll time exceeds
the limit. It's possible for vcpu->halt_poll_ns grow once past
halt_poll_ns, and stay there until a halt which takes longer than
vcpu->halt_poll_ns. For example, booting a Linux guest with
halt_poll_ns=11000:

 ... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 0 (shrink 10000)
 ... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (grow 0)
 ... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (grow 10000)

Signed-off-by: David Matlack <dmatlack@google.com>
Fixes: aca6ff29c4063a8d467cdee241e6b3bf7dc4a171
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoPCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
Krzysztof Hałasa [Tue, 1 Mar 2016 06:07:18 +0000 (07:07 +0100)]
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()

commit 54c6e2dd00c313d0add58e5befe62fe6f286d03b upstream.

pci_create_root_bus() passes a "parent" pointer to
pci_bus_assign_domain_nr().  When CONFIG_PCI_DOMAINS_GENERIC is defined,
pci_bus_assign_domain_nr() dereferences that pointer.  Many callers of
pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL
pointer dereference error.

7c674700098c ("PCI: Move domain assignment from arm64 to generic code")
moved the "parent" dereference from arm64 to generic code.  Only arm64 used
that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it
always supplied a valid "parent" pointer.  Other arches supplied NULL
"parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they
used a no-op version of pci_bus_assign_domain_nr().

8c7d14746abc ("ARM/PCI: Move to generic PCI domains") defined
CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use
pci_common_init(), which supplies a NULL "parent" pointer.
These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash
with a NULL pointer dereference like this while probing PCI:

  Unable to handle kernel NULL pointer dereference at virtual address 000000a4
  PC is at pci_bus_assign_domain_nr+0x10/0x84
  LR is at pci_create_root_bus+0x48/0x2e4
  Kernel panic - not syncing: Attempted to kill init!

[bhelgaas: changelog, add "Reported:" and "Fixes:" tags]
Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1
Fixes: 8c7d14746abc ("ARM/PCI: Move to generic PCI domains")
Fixes: 7c674700098c ("PCI: Move domain assignment from arm64 to generic code")
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Lokesh Vutla [Mon, 7 Mar 2016 08:41:21 +0000 (01:41 -0700)]
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property

commit 2e18f5a1bc18e8af7031b3b26efde25307014837 upstream.

Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.

Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoARM: dts: dra7: do not gate cpsw clock due to errata i877
Mugunthan V N [Mon, 7 Mar 2016 08:41:22 +0000 (01:41 -0700)]
ARM: dts: dra7: do not gate cpsw clock due to errata i877

commit 0f514e690740e54815441a87708c3326f8aa8709 upstream.

Errata id: i877

Description:
------------
The RGMII 1000 Mbps Transmit timing is based on the output clock
(rgmiin_txc) being driven relative to the rising edge of an internal
clock and the output control/data (rgmiin_txctl/txd) being driven relative
to the falling edge of an internal clock source. If the internal clock
source is allowed to be static low (i.e., disabled) for an extended period
of time then when the clock is actually enabled the timing delta between
the rising edge and falling edge can change over the lifetime of the
device. This can result in the device switching characteristics degrading
over time, and eventually failing to meet the Data Manual Delay Time/Skew
specs.
To maintain RGMII 1000 Mbps IO Timings, SW should minimize the
duration that the Ethernet internal clock source is disabled. Note that
the device reset state for the Ethernet clock is "disabled".
Other RGMII modes (10 Mbps, 100Mbps) are not affected

Workaround:
-----------
If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps,
SW should minimize the time the Ethernet internal clock source is disabled
to a maximum of 200 hours in a device life cycle. This is done by enabling
the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android)
by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP.

So, do not allow to gate the cpsw clocks using ti,no-idle property in
cpsw node assuming 1000 Mbps is being used all the time. If someone does
not need 1000 Mbps and wants to gate clocks to cpsw, this property needs
to be deleted in their respective board files.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
Thomas Petazzoni [Tue, 8 Mar 2016 15:59:57 +0000 (16:59 +0100)]
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window

commit d7d5a43c0d16760f25d892bf9329848167a8b8a4 upstream.

When the Crypto SRAM mappings were added to the Device Tree files
describing the Armada XP boards in commit c466d997bb16 ("ARM: mvebu:
define crypto SRAM ranges for all armada-xp boards"), the fact that
those mappings were overlaping with the PCIe memory aperture was
overlooked. Due to this, we currently have for all Armada XP platforms
a situation that looks like this:

Memory mapping on Armada XP boards with internal registers at
0xf1000000:

 - 0x00000000 -> 0xf0000000 3.75G  RAM
 - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
 - 0xf1000000 -> 0xf1100000 1M internal registers
 - 0xf8000000 -> 0xffe0000 126M PCIe memory aperture
 - 0xf8100000 -> 0xf8110000 64KB Crypto SRAM #0 => OVERLAPS WITH PCIE !
 - 0xf8110000 -> 0xf8120000 64KB Crypto SRAM #1 => OVERLAPS WITH PCIE !
 - 0xffe00000 -> 0xfff00000 1M PCIe I/O aperture
 - 0xfff0000  -> 0xffffffff 1M BootROM

The overlap means that when PCIe devices are added, depending on their
memory window needs, they might or might not be mapped into the
physical address space. Indeed, they will not be mapped if the area
allocated in the PCIe memory aperture by the PCI core overlaps with
one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB
of PCIe memory will see its PCIe memory window allocated from
0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due
to this, the PCIe window is not created, and any attempt to access the
PCIe window makes the kernel explode:

[    3.302213] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143)
[    3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window
[    3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22
[    3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018

This problem does not occur on Armada 370 boards, because we use the
following memory mapping (for boards that have internal registers at
0xf1000000):

 - 0x00000000 -> 0xf0000000 3.75G  RAM
 - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
 - 0xf1000000 -> 0xf1100000 1M internal registers
 - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 => OK !
 - 0xf8000000 -> 0xffe0000 126M PCIe memory
 - 0xffe00000 -> 0xfff00000 1M PCIe I/O
 - 0xfff0000  -> 0xffffffff 1M BootROM

Obviously, the solution is to align the location of the Crypto SRAM
mappings of Armada XP to be similar with the ones on Armada 370, i.e
have them between the "internal registers" area and the beginning of
the PCIe aperture.

However, we have a special case with the OpenBlocks AX3-4 platform,
which has a 128 MB NOR flash. Currently, this NOR flash is mapped from
0xf0000000 to 0xf8000000. This is possible because on OpenBlocks
AX3-4, the internal registers are not at 0xf1000000. And this explains
why the Crypto SRAM mappings were not configured at the same place on
Armada XP.

Hence, the solution is two-fold:

 (1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from
     0xe8000000 to 0xf0000000. This frees the 0xf0000000 ->
     0xf80000000 space.

 (2) Move the Crypto SRAM mappings on Armada XP to be similar to
     Armada 370 (except of course that Armada XP has two Crypto SRAM
     and not one).

After this patch, the memory mapping on Armada XP boards with
registers at 0xf1 is:

 - 0x00000000 -> 0xf0000000 3.75G  RAM
 - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
 - 0xf1000000 -> 0xf1100000 1M internal registers
 - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
 - 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
 - 0xf8000000 -> 0xffe0000 126M PCIe memory
 - 0xffe00000 -> 0xfff00000 1M PCIe I/O
 - 0xfff0000  -> 0xffffffff 1M BootROM

And the memory mapping for the special case of the OpenBlocks AX3-4
(internal registers at 0xd0000000, NOR of 128 MB):

 - 0x00000000 -> 0xc0000000 3G  RAM
 - 0xd0000000 -> 0xd1000000 1M internal registers
 - 0xe800000  -> 0xf0000000 128M NOR flash
 - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
 - 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
 - 0xf8000000 -> 0xffe0000 126M PCIe memory
 - 0xffe00000 -> 0xfff00000 1M PCIe I/O
 - 0xfff0000  -> 0xffffffff 1M BootROM

Fixes: c466d997bb16 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards")
Reported-by: Phil Sutter <phil@nwl.cc>
Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoarm64: account for sparsemem section alignment when choosing vmemmap offset
Ard Biesheuvel [Tue, 8 Mar 2016 14:09:29 +0000 (21:09 +0700)]
arm64: account for sparsemem section alignment when choosing vmemmap offset

commit 36e5cd6b897e17d03008f81e075625d8e43e52d0 upstream.

Commit dfd55ad85e4a ("arm64: vmemmap: use virtual projection of linear
region") fixed an issue where the struct page array would overflow into the
adjacent virtual memory region if system RAM was placed so high up in
physical memory that its addresses were not representable in the build time
configured virtual address size.

However, the fix failed to take into account that the vmemmap region needs
to be relatively aligned with respect to the sparsemem section size, so that
a sequence of page structs corresponding with a sparsemem section in the
linear region appears naturally aligned in the vmemmap region.

So round up vmemmap to sparsemem section size. Since this essentially moves
the projection of the linear region up in memory, also revert the reduction
of the size of the vmemmap region.

Fixes: dfd55ad85e4a ("arm64: vmemmap: use virtual projection of linear region")
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: David Daney <david.daney@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years ago Merge tag 'v4.4.5' into linux-linaro-lsk-v4.4
Alex Shi [Mon, 14 Mar 2016 07:16:14 +0000 (15:16 +0800)]
 Merge tag 'v4.4.5' into linux-linaro-lsk-v4.4

 This is the 4.4.5 stable release

8 years agoLinux 4.4.5
Greg Kroah-Hartman [Wed, 9 Mar 2016 23:35:58 +0000 (15:35 -0800)]
Linux 4.4.5

8 years agodrm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable
Alex Deucher [Mon, 7 Mar 2016 23:40:45 +0000 (18:40 -0500)]
drm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable

When upstream commit 429c45deae6e57f1bb91bfb05b671063fb0cef60
was applied to 4.4 as d60703ca942e8d044d61360bc9792fcab54b95d0
it applied incorrectly to the tonga_ip_blocks array rather than
the topaz_ip_blocks array.  Fix that up here.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=113951

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agomodules: fix longstanding /proc/kallsyms vs module insertion race.
Rusty Russell [Wed, 3 Feb 2016 06:25:26 +0000 (16:55 +1030)]
modules: fix longstanding /proc/kallsyms vs module insertion race.

commit 8244062ef1e54502ef55f54cced659913f244c3e upstream.

For CONFIG_KALLSYMS, we keep two symbol tables and two string tables.
There's one full copy, marked SHF_ALLOC and laid out at the end of the
module's init section.  There's also a cut-down version that only
contains core symbols and strings, and lives in the module's core
section.

After module init (and before we free the module memory), we switch
the mod->symtab, mod->num_symtab and mod->strtab to point to the core
versions.  We do this under the module_mutex.

However, kallsyms doesn't take the module_mutex: it uses
preempt_disable() and rcu tricks to walk through the modules, because
it's used in the oops path.  It's also used in /proc/kallsyms.
There's nothing atomic about the change of these variables, so we can
get the old (larger!) num_symtab and the new symtab pointer; in fact
this is what I saw when trying to reproduce.

By grouping these variables together, we can use a
carefully-dereferenced pointer to ensure we always get one or the
other (the free of the module init section is already done in an RCU
callback, so that's safe).  We allocate the init one at the end of the
module init section, and keep the core one inside the struct module
itself (it could also have been allocated at the end of the module
core, but that's probably overkill).

[ Rebased for 4.4-stable and older, because the following changes aren't
  in the older trees:
  - e0224418516b4d8a6c2160574bac18447c354ef0: adds arg to is_core_symbol
  - 7523e4dc5057e157212b4741abd6256e03404cf1: module_init/module_core/init_size/core_size
    become init_layout.base/core_layout.base/init_layout.size/core_layout.size.
]

Reported-by: Weilong Chen <chenweilong@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agodrm/i915: refine qemu south bridge detection
Gerd Hoffmann [Mon, 25 Jan 2016 11:02:28 +0000 (12:02 +0100)]
drm/i915: refine qemu south bridge detection

commit f2e305108faba0c85eb4ba4066599decb675117e upstream.

The test for the qemu q35 south bridge added by commit
"39bfcd52 drm/i915: more virtual south bridge detection"
also matches on real hardware.  Having the check for
virtual systems last in the list is not enough to avoid
that ...

Refine the check by additionally verifying the pci
subsystem id to see whenever it *really* is qemu.

[ v2: fix subvendor tyops ]

Reported-and-tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453719748-10944-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 1e859111c128265f8d62b39ff322e42b1ddb5a20)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agodrm/i915: more virtual south bridge detection
Gerd Hoffmann [Thu, 26 Nov 2015 11:03:51 +0000 (12:03 +0100)]
drm/i915: more virtual south bridge detection

commit 39bfcd5235e07e95ad3e70eab8e0b85db181de9e upstream.

Commit "30c964a drm/i915: Detect virtual south bridge" detects and
handles the southbridge emulated by vmware esx.  Add the ich9 south
bridge emulated by 'qemu -M q35'.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoblock: get the 1st and last bvec via helpers
Ming Lei [Fri, 26 Feb 2016 15:40:52 +0000 (23:40 +0800)]
block: get the 1st and last bvec via helpers

commit 25e71a99f10e444cd00bb2ebccb11e1c9fb672b1 upstream.

This patch applies the two introduced helpers to
figure out the 1st and last bvec, and fixes the
original way after bio splitting.

Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoblock: check virt boundary in bio_will_gap()
Ming Lei [Fri, 26 Feb 2016 15:40:51 +0000 (23:40 +0800)]
block: check virt boundary in bio_will_gap()

commit e0af29171aa8912e1ca95023b75ef336cd70d661 upstream.

In the following patch, the way for figuring out
the last bvec will be changed with a bit cost introduced,
so return immediately if the queue doesn't have virt
boundary limit. Actually most of devices have not
this limit.

Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agodrm/amdgpu: Use drm_calloc_large for VM page_tables array
Michel Dänzer [Tue, 19 Jan 2016 08:59:46 +0000 (17:59 +0900)]
drm/amdgpu: Use drm_calloc_large for VM page_tables array

commit 9571e1d84042f5670df9fabdcbe7dd5da3abe43e upstream.

It can be big, depending on the VM address space size, which is tunable
via the vm_size module parameter.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93721
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agothermal: cpu_cooling: fix out of bounds access in time_in_idle
Javi Merino [Thu, 11 Feb 2016 12:00:51 +0000 (12:00 +0000)]
thermal: cpu_cooling: fix out of bounds access in time_in_idle

commit a53b8394ec3c67255928df6ee9cc99dd1cd452e3 upstream.

In __cpufreq_cooling_register() we allocate the arrays for time_in_idle
and time_in_idle_timestamp to be as big as the number of cpus in this
cpufreq device.  However, in get_load() we access this array using the
cpu number as index, which can result in an out of bound access.

Index time_in_idle{,_timestamp} using the index in the cpufreq_device's
allowed_cpus mask, as we do for the load_cpu array in
cpufreq_get_requested_power()

Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoi2c: brcmstb: allocate correct amount of memory for regmap
Wolfram Sang [Sun, 21 Feb 2016 14:16:48 +0000 (15:16 +0100)]
i2c: brcmstb: allocate correct amount of memory for regmap

commit 7314d22a2f5bd40468d57768be368c3d9b4bd726 upstream.

We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.

Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoubi: Fix out of bounds write in volume update code
Richard Weinberger [Sun, 21 Feb 2016 09:53:03 +0000 (10:53 +0100)]
ubi: Fix out of bounds write in volume update code

commit e4f6daac20332448529b11f09388f1d55ef2084c upstream.

ubi_start_leb_change() allocates too few bytes.
ubi_more_leb_change_data() will write up to req->upd_bytes +
ubi->min_io_size bytes.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agocxl: Fix PSL timebase synchronization detection
Frederic Barrat [Wed, 24 Feb 2016 17:27:51 +0000 (18:27 +0100)]
cxl: Fix PSL timebase synchronization detection

commit 923adb1646d5ba739d2a1e63ee20d60574d9da8e upstream.

The PSL timebase synchronization is seemingly failing for
configuration not including VIRT_CPU_ACCOUNTING_NATIVE. The driver
shows the following trace in dmesg:
PSL: Timebase sync: giving up!

The PSL timebase register is actually syncing correctly, but the cxl
driver is not detecting it. Fix is to use the proper timebase-to-time
conversion.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoMIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
Maciej W. Rozycki [Fri, 4 Mar 2016 01:42:49 +0000 (01:42 +0000)]
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'

commit e723e3f7f9591b79e8c56b3d7c5a204a9c571b55 upstream.

Avoid sending a partially initialised `siginfo_t' structure along SIGFPE
signals issued from `do_ov' and `do_trap_or_bp', leading to information
leaking from the kernel stack.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoMIPS: scache: Fix scache init with invalid line size.
Govindraj Raja [Mon, 29 Feb 2016 11:41:20 +0000 (11:41 +0000)]
MIPS: scache: Fix scache init with invalid line size.

commit 56fa81fc9a5445938f3aa2e63d15ab63dc938ad6 upstream.

In current scache init cache line_size is determined from
cpu config register, however if there there no scache
then mips_sc_probe_cm3 function populates a invalid line_size of 2.

The invalid line_size can cause a NULL pointer deference
during r4k_dma_cache_inv as r4k_blast_scache is populated
based on line_size. Scache line_size of 2 is invalid option in
r4k_blast_scache_setup.

This issue was faced during a MIPS I6400 based virtual platform bring up
where scache was not available in virtual platform model.

Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Fixes: 7d53e9c4cd21("MIPS: CM3: Add support for CM3 L2 cache.")
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hartley <James.Hartley@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12710/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: serial: option: add support for Quectel UC20
Yegor Yefremov [Mon, 29 Feb 2016 15:39:57 +0000 (16:39 +0100)]
USB: serial: option: add support for Quectel UC20

commit c0992d0f54847d0d1d85c60fcaa054f175ab1ccd upstream.

Add support for Quectel UC20 and blacklist the QMI interface.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: serial: option: add support for Telit LE922 PID 0x1045
Daniele Palmas [Mon, 29 Feb 2016 14:36:11 +0000 (15:36 +0100)]
USB: serial: option: add support for Telit LE922 PID 0x1045

commit 5deef5551c77e488922cc4bf4bc76df63be650d0 upstream.

This patch adds support for 0x1045 PID of Telit LE922.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: qcserial: add Sierra Wireless EM74xx device ID
Bjørn Mork [Tue, 1 Mar 2016 13:36:32 +0000 (14:36 +0100)]
USB: qcserial: add Sierra Wireless EM74xx device ID

commit 04fdbc825ffc02fb098964b92de802fff44e73fd upstream.

The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
Patrik Halfar [Sat, 20 Feb 2016 17:49:56 +0000 (18:49 +0100)]
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)

commit 013dd239d6220a4e0dfdf0d45a82c34f1fd73deb upstream.

New revision of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card
has new idProduct.

Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x413c Dell Computer Corp.
  idProduct          0x81b3
  bcdDevice            0.06
  iManufacturer           1 Sierra Wireless, Incorporated
  iProduct                2 Dell Wireless 5809e Gobi™ 4G HSPA+ Mobile Broadband Card
  iSerial                 3
  bNumConfigurations      2

Signed-off-by: Patrik Halfar <patrik_halfar@halfarit.cz>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoUSB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
Vittorio Alfieri [Sun, 28 Feb 2016 13:40:24 +0000 (14:40 +0100)]
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

commit 3c4c615d70c8cbdc8ba8c79ed702640930652a79 upstream.

The Parrot NMEA GPS Flight Recorder is a USB composite device
consisting of hub, flash storage, and cp210x usb to serial chip.
It is an accessory to the mass-produced Parrot AR Drone 2.
The device emits standard NMEA messages which make the it compatible
with NMEA compatible software. It was tested using gpsd version 3.11-3
as an NMEA interpreter and using the official Parrot Flight Recorder.

Signed-off-by: Vittorio Alfieri <vittorio88@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agousb: chipidea: otg: change workqueue ci_otg as freezable
Peter Chen [Wed, 24 Feb 2016 03:05:25 +0000 (11:05 +0800)]
usb: chipidea: otg: change workqueue ci_otg as freezable

commit d144dfea8af7108f613139623e63952ed7e69c0c upstream.

If we use USB ID pin as wakeup source, and there is a USB block
device on this USB OTG (ID) cable, the system will be deadlock
after system resume.

The root cause for this problem is: the workqueue ci_otg may try
to remove hcd before the driver resume has finished, and hcd will
disconnect the device on it, then, it will call device_release_driver,
and holds the device lock "dev->mutex", but it is never unlocked since
it waits workqueue writeback to run to flush the block information, but
the workqueue writeback is freezable, it is not thawed before driver
resume has finished.

When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it
tries to get its device lock "dev->mutex", but it can't get it forever,
then the deadlock occurs. Below call stacks show the situation.

So, in order to fix this problem, we need to change workqueue ci_otg
as freezable, then the work item in this workqueue will be run after
driver's resume, this workqueue will not be blocked forever like above
case since the workqueue writeback has been thawed too.

Tested at: i.mx6qdl-sabresd and i.mx6sx-sdb.

[  555.178869] kworker/u2:13   D c07de74c     0   826      2 0x00000000
[  555.185310] Workqueue: ci_otg ci_otg_work
[  555.189353] Backtrace:
[  555.191849] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0)
[  555.198912]  r10:ee471ba0 r9:00000000 r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4
[  555.206867]  r4:ee470000
[  555.209453] [<c07dec24>] (schedule) from [<c07e2fc4>] (schedule_timeout+0x15c/0x1e0)
[  555.217212]  r4:7fffffff r3:edc2b000
[  555.220862] [<c07e2e68>] (schedule_timeout) from [<c07df6c8>] (wait_for_common+0x94/0x144)
[  555.229140]  r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 r4:7fffffff
[  555.235980] [<c07df634>] (wait_for_common) from [<c07df790>] (wait_for_completion+0x18/0x1c)
[  555.244430]  r10:00000001 r9:c0b5563c r8:c0042e48 r7:ef086000 r6:eea4372c r5:ef131b00
[  555.252383]  r4:00000000
[  555.254970] [<c07df778>] (wait_for_completion) from [<c0043cb8>] (flush_work+0x19c/0x234)
[  555.263177] [<c0043b1c>] (flush_work) from [<c0043fac>] (flush_delayed_work+0x48/0x4c)
[  555.271106]  r8:ed5b5000 r7:c0b38a3c r6:eea439cc r5:eea4372c r4:eea4372c
[  555.277958] [<c0043f64>] (flush_delayed_work) from [<c00eae18>] (bdi_unregister+0x84/0xec)
[  555.286236]  r4:eea43520 r3:20000153
[  555.289885] [<c00ead94>] (bdi_unregister) from [<c02c2154>] (blk_cleanup_queue+0x180/0x29c)
[  555.298250]  r5:eea43808 r4:eea43400
[  555.301909] [<c02c1fd4>] (blk_cleanup_queue) from [<c0417914>] (__scsi_remove_device+0x48/0xb8)
[  555.310623]  r7:00000000 r6:20000153 r5:ededa950 r4:ededa800
[  555.316403] [<c04178cc>] (__scsi_remove_device) from [<c0415e90>] (scsi_forget_host+0x64/0x68)
[  555.325028]  r5:ededa800 r4:ed5b5000
[  555.328689] [<c0415e2c>] (scsi_forget_host) from [<c0409828>] (scsi_remove_host+0x78/0x104)
[  555.337054]  r5:ed5b5068 r4:ed5b5000
[  555.340709] [<c04097b0>] (scsi_remove_host) from [<c04cdfcc>] (usb_stor_disconnect+0x50/0xb4)
[  555.349247]  r6:ed5b56e4 r5:ed5b5818 r4:ed5b5690 r3:00000008
[  555.355025] [<c04cdf7c>] (usb_stor_disconnect) from [<c04b3bc8>] (usb_unbind_interface+0x78/0x25c)
[  555.363997]  r8:c13919b4 r7:edd3c000 r6:edd3c020 r5:ee551c68 r4:ee551c00 r3:c04cdf7c
[  555.371892] [<c04b3b50>] (usb_unbind_interface) from [<c03dc248>] (__device_release_driver+0x8c/0x118)
[  555.381213]  r10:00000001 r9:edd90c00 r8:c13919b4 r7:ee551c68 r6:c0b546e0 r5:c0b5563c
[  555.389167]  r4:edd3c020
[  555.391752] [<c03dc1bc>] (__device_release_driver) from [<c03dc2fc>] (device_release_driver+0x28/0x34)
[  555.401071]  r5:edd3c020 r4:edd3c054
[  555.404721] [<c03dc2d4>] (device_release_driver) from [<c03db304>] (bus_remove_device+0xe0/0x110)
[  555.413607]  r5:edd3c020 r4:ef17f04c
[  555.417253] [<c03db224>] (bus_remove_device) from [<c03d8128>] (device_del+0x114/0x21c)
[  555.425270]  r6:edd3c028 r5:edd3c020 r4:ee551c00 r3:00000000
[  555.431045] [<c03d8014>] (device_del) from [<c04b1560>] (usb_disable_device+0xa4/0x1e8)
[  555.439061]  r8:edd3c000 r7:eded8000 r6:00000000 r5:00000001 r4:ee551c00
[  555.445906] [<c04b14bc>] (usb_disable_device) from [<c04a8e54>] (usb_disconnect+0x74/0x224)
[  555.454271]  r9:edd90c00 r8:ee551000 r7:ee551c68 r6:ee551c9c r5:ee551c00 r4:00000001
[  555.462156] [<c04a8de0>] (usb_disconnect) from [<c04a8fb8>] (usb_disconnect+0x1d8/0x224)
[  555.470259]  r10:00000001 r9:edd90000 r8:ee471e2c r7:ee551468 r6:ee55149c r5:ee551400
[  555.478213]  r4:00000001
[  555.480797] [<c04a8de0>] (usb_disconnect) from [<c04ae5ec>] (usb_remove_hcd+0xa0/0x1ac)
[  555.488813]  r10:00000001 r9:ee471eb0 r8:00000000 r7:ef3d9500 r6:eded810c r5:eded80b0
[  555.496765]  r4:eded8000
[  555.499351] [<c04ae54c>] (usb_remove_hcd) from [<c04d4158>] (host_stop+0x28/0x64)
[  555.506847]  r6:eeb50010 r5:eded8000 r4:eeb51010
[  555.511563] [<c04d4130>] (host_stop) from [<c04d09b8>] (ci_otg_work+0xc4/0x124)
[  555.518885]  r6:00000001 r5:eeb50010 r4:eeb502a0 r3:c04d4130
[  555.524665] [<c04d08f4>] (ci_otg_work) from [<c00454f0>] (process_one_work+0x194/0x420)
[  555.532682]  r6:ef086000 r5:eeb502a0 r4:edc44480
[  555.537393] [<c004535c>] (process_one_work) from [<c00457b0>] (worker_thread+0x34/0x514)
[  555.545496]  r10:edc44480 r9:ef086000 r8:c0b1a100 r7:ef086034 r6:00000088 r5:edc44498
[  555.553450]  r4:ef086000
[  555.556032] [<c004577c>] (worker_thread) from [<c004bab4>] (kthread+0xdc/0xf8)
[  555.563268]  r10:00000000 r9:00000000 r8:00000000 r7:c004577c r6:edc44480 r5:eddc15c0
[  555.571221]  r4:00000000
[  555.573804] [<c004b9d8>] (kthread) from [<c000fef0>] (ret_from_fork+0x14/0x24)
[  555.581040]  r7:00000000 r6:00000000 r5:c004b9d8 r4:eddc15c0

[  553.429383] sh              D c07de74c     0   694    691 0x00000000
[  553.435801] Backtrace:
[  553.438295] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0)
[  553.445358]  r10:edd3c054 r9:edd3c078 r8:edddbd50 r7:edcbbc00 r6:c1377c34 r5:60000153
[  553.453313]  r4:eddda000
[  553.455896] [<c07dec24>] (schedule) from [<c07deff8>] (schedule_preempt_disabled+0x10/0x14)
[  553.464261]  r4:edd3c058 r3:0000000a
[  553.467910] [<c07defe8>] (schedule_preempt_disabled) from [<c07e0bbc>] (mutex_lock_nested+0x1a0/0x3e8)
[  553.477254] [<c07e0a1c>] (mutex_lock_nested) from [<c03e927c>] (dpm_complete+0xc0/0x1b0)
[  553.485358]  r10:00561408 r9:edd3c054 r8:c0b4863c r7:edddbd90 r6:c0b485d8 r5:edd3c020
[  553.493313]  r4:edd3c0d0
[  553.495896] [<c03e91bc>] (dpm_complete) from [<c03e9388>] (dpm_resume_end+0x1c/0x20)
[  553.503652]  r9:00000000 r8:c0b1a9d0 r7:c1334ec0 r6:c1334edc r5:00000003 r4:00000010
[  553.511544] [<c03e936c>] (dpm_resume_end) from [<c0079894>] (suspend_devices_and_enter+0x158/0x504)
[  553.520604]  r4:00000000 r3:c1334efc
[  553.524250] [<c007973c>] (suspend_devices_and_enter) from [<c0079e74>] (pm_suspend+0x234/0x2cc)
[  553.532961]  r10:00561408 r9:ed6b7300 r8:00000004 r7:c1334eec r6:00000000 r5:c1334ee8
[  553.540914]  r4:00000003
[  553.543493] [<c0079c40>] (pm_suspend) from [<c0078a6c>] (state_store+0x6c/0xc0)

[  555.703684] 7 locks held by kworker/u2:13/826:
[  555.708140]  #0:  ("%s""ci_otg"){++++.+}, at: [<c0045484>] process_one_work+0x128/0x420
[  555.716277]  #1:  ((&ci->work)){+.+.+.}, at: [<c0045484>] process_one_work+0x128/0x420
[  555.724317]  #2:  (usb_bus_list_lock){+.+.+.}, at: [<c04ae5e4>] usb_remove_hcd+0x98/0x1ac
[  555.732626]  #3:  (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224
[  555.740403]  #4:  (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224
[  555.748179]  #5:  (&dev->mutex){......}, at: [<c03dc2f4>] device_release_driver+0x20/0x34
[  555.756487]  #6:  (&shost->scan_mutex){+.+.+.}, at: [<c04097d0>] scsi_remove_host+0x20/0x104

Cc: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoALSA: timer: Fix broken compat timer user status ioctl
Takashi Iwai [Sun, 28 Feb 2016 10:36:14 +0000 (11:36 +0100)]
ALSA: timer: Fix broken compat timer user status ioctl

commit 3a72494ac2a3bd229db941d51e7efe2f6ccd947b upstream.

The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one.  This patch addresses
it to return the proper struct.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoALSA: hdspm: Fix zero-division
Takashi Iwai [Mon, 29 Feb 2016 13:32:42 +0000 (14:32 +0100)]
ALSA: hdspm: Fix zero-division

commit c1099c3294c2344110085a38c50e478a5992b368 upstream.

HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code.  This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoALSA: hdsp: Fix wrong boolean ctl value accesses
Takashi Iwai [Mon, 29 Feb 2016 13:26:43 +0000 (14:26 +0100)]
ALSA: hdsp: Fix wrong boolean ctl value accesses

commit eab3c4db193f5fcccf70e884de9a922ca2c63d80 upstream.

snd-hdsp driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements.  This patch fixes them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoALSA: hdspm: Fix wrong boolean ctl value accesses
Takashi Iwai [Mon, 29 Feb 2016 13:25:16 +0000 (14:25 +0100)]
ALSA: hdspm: Fix wrong boolean ctl value accesses

commit 537e48136295c5860a92138c5ea3959b9542868b upstream.

snd-hdspm driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements.  This patch fixes them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoALSA: seq: oss: Don't drain at closing a client
Takashi Iwai [Tue, 1 Mar 2016 17:30:18 +0000 (18:30 +0100)]
ALSA: seq: oss: Don't drain at closing a client

commit 197b958c1e76a575d77038cc98b4bebc2134279f upstream.

The OSS sequencer client tries to drain the pending events at
releasing.  Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future.  Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
future.

Back to history, the draining feature was implemented at the time we
misinterpreted POSIX definition for blocking file operation.
Actually, such a behavior is superfluous at release, and we should
just release the device as is instead of keeping it up forever.

This patch just removes the draining call that may block the release
for too long time unexpectedly.

BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>