firefly-linux-kernel-4.4.55.git
11 years agoclk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.
Tony Prisk [Sun, 14 Apr 2013 05:28:35 +0000 (17:28 +1200)]
clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.

The case of PLL_TYPE_WM8750 in both these functions is missing a break
statement causing a fall-through to the default: case.

Insert the missing break statements.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: sunxi: Unify oscillator clock
Emilio López [Wed, 10 Apr 2013 22:02:57 +0000 (15:02 -0700)]
clk: sunxi: Unify oscillator clock

This commit uses the new fixed-rate support on the composite clock to
unify osc24M_fixed and osc24M clocks, so it matches the actual hardware.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: replace clk_register_gatable_osc with a call to
clk_register_composite]

11 years agoclk: composite: allow fixed rates & fixed dividers
Mike Turquette [Thu, 11 Apr 2013 18:31:37 +0000 (11:31 -0700)]
clk: composite: allow fixed rates & fixed dividers

The composite clock assumes that any clock implementing the .recalc_rate
callback will also implement .round_rate and .set_rate.  This is not
always true; the basic fixed-rate clock will only implement .recalc_rate
and a fixed-divider clock may choose to implement .recalc_rate and
.round_rate but not .set_rate.

Fix this by conditionally registering .round_rate and .set_rate
callbacks based on the rate_ops passed in to clk_composite_register.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
11 years agoclk: composite: rename 'div' references to 'rate'
Mike Turquette [Thu, 11 Apr 2013 18:31:36 +0000 (11:31 -0700)]
clk: composite: rename 'div' references to 'rate'

Rename all div_hw and div_ops related variables and functions to use
rate_hw, rate_ops, etc.  This is to make the rate-change portion of the
composite clk implementation more generic.  A patch following this one
will allow for fixed-rate clocks to reuse this infrastructure.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
11 years agoclk: add si5351 i2c common clock driver
Sebastian Hesselbarth [Thu, 11 Apr 2013 19:42:29 +0000 (21:42 +0200)]
clk: add si5351 i2c common clock driver

This patch adds a common clock driver for Silicon Labs Si5351a/b/c
i2c programmable clock generators. Currently, the driver does not
support VXCO feature of si5351b. Passing platform_data or DT bindings
selectively allows to overwrite stored Si5351 configuration which is
very helpful for clock generators with empty eeprom configuration.
Corresponding device tree binding documentation is also added.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Michal Bachraty <michal.bachraty@streamunlimited.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: add device tree fixed-factor-clock binding support
Gregory CLEMENT [Fri, 12 Apr 2013 11:57:44 +0000 (13:57 +0200)]
clk: add device tree fixed-factor-clock binding support

Add support for DT "fixed-factor-clock" binding to the common fixed
factor clock support.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Properly handle notifier return values
Soren Brinkmann [Wed, 3 Apr 2013 19:17:12 +0000 (12:17 -0700)]
clk: Properly handle notifier return values

Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an
inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD.
This inconsistency leaves errors undetected in some cases:
clk_set_parent() calls __clk_speculate_rates(), which stops when it
hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the
caller.
clk_set_parent() compares this return value against NOTIFY_STOP only,
ignoring NOTIFY_BAD returns.

Use NOTIFY_STOP_MASK to detect a negative notifier return value and
document all four return value options.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: ux500: abx500: Define clock tree for ab850x
Ulf Hansson [Tue, 2 Apr 2013 23:06:26 +0000 (01:06 +0200)]
clk: ux500: abx500: Define clock tree for ab850x

The patch setups the first version of the clock tree for ab850x, which
is used by u8500 platforms. Mainly sysctrl clocks are used.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: ux500: Add support for sysctrl clocks
Ulf Hansson [Wed, 3 Apr 2013 12:26:57 +0000 (14:26 +0200)]
clk: ux500: Add support for sysctrl clocks

The abx500 sysctrl clocks are using the ab8500 sysctrl driver to
modify the clock hardware. Sysctrl clocks are represented by a
ab8500 sysctrl register and with a corresponding bitmask.

The sysctrl clocks are slow path clocks, which means clk_prepare
and clk_unprepare will be used to gate|ungate these clocks.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: mvebu: Fix valid value range checking for cpu_freq_select
Axel Lin [Mon, 8 Apr 2013 03:43:02 +0000 (11:43 +0800)]
clk: mvebu: Fix valid value range checking for cpu_freq_select

cpu_freq_select is used as array subscript, thus the valid value range
is 0 ... ARRAY_SIZE() - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issues]

11 years agoclk: Fixup locking issues for clk_set_parent
Ulf Hansson [Tue, 2 Apr 2013 21:09:39 +0000 (23:09 +0200)]
clk: Fixup locking issues for clk_set_parent

Updating the clock tree topology must be protected with the spinlock
when doing clk_set_parent, otherwise we can not handle the migration
of the enable_count in a safe manner.

While issuing the .set_parent callback to make the clk-hw perform the
switch to the new parent, we can not hold the spinlock since it is must
be allowed to be slow path. This complicates error handling, but is still
possible to achieve.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Fixup errorhandling for clk_set_parent
Ulf Hansson [Tue, 2 Apr 2013 21:09:38 +0000 (23:09 +0200)]
clk: Fixup errorhandling for clk_set_parent

Fixup the broken feature of allowing reparent of a clk to the
orhpan list and vice verse. When operating on a single-parent
clk, the .set_parent callback for the clk hw is optional to
implement, but for a multi-parent clk it is mandatory.

Moreover improve the errorhandling by verifying the prerequisites
before triggering clk notifiers. This will prevent unnecessary
rollback with ABORT_RATE_CHANGE.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Restructure code for __clk_reparent
Ulf Hansson [Tue, 2 Apr 2013 21:09:37 +0000 (23:09 +0200)]
clk: Restructure code for __clk_reparent

Split __clk_reparent into three pieces, one for doing the actual
reparent for updating the clock tree topology, one for the
COMMON_CLK_DEBUG code and one for doing the rate recalculation.

This patch also makes it possible to hold the spinlock over the
update of the clock tree topology, which could not be done before
when both debugfs updates and clock rate updates was done within
the same function.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: sunxi: drop an unnecesary kmalloc
Emilio López [Wed, 27 Mar 2013 21:20:43 +0000 (18:20 -0300)]
clk: sunxi: drop an unnecesary kmalloc

clk_register will copy this information, so we can just use a normal
array and do one less dynamic allocation.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: sunxi: drop CLK_IGNORE_UNUSED
Emilio López [Wed, 27 Mar 2013 21:20:42 +0000 (18:20 -0300)]
clk: sunxi: drop CLK_IGNORE_UNUSED

This flag was in place to prevent important clocks from getting gated
while they had no users. Now that the UART driver supports clocks
properly, we can drop this.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates
Emilio López [Wed, 27 Mar 2013 21:20:37 +0000 (18:20 -0300)]
clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates

This patchset adds DT support for all the AXI, AHB, APB0 and APB1
gates present on sunxi SoCs.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag
Soren Brinkmann [Tue, 2 Apr 2013 22:36:56 +0000 (15:36 -0700)]
clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag

Dividers which have CLK_DIVIDER_ONE_BASED set have a redundant state,
being a divider value of zero. Some hardware implementations allow a
zero divider which simply doesn't alter the frequency. I.e. it acts like
a divide by one or bypassing the divider.
This flag is used to handle such HW in the clk-divider model.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: mvebu: Use common of_clk_init() function
Jean-Francois Moine [Tue, 2 Apr 2013 11:02:36 +0000 (13:02 +0200)]
clk: mvebu: Use common of_clk_init() function

The use common of_clk_init() function simplifies the clock initialization
and adds handling of the DT "fixed-clock".

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed $SUBJECT to reflect correct file path]

11 years agoclk: fix clk_mux::flags kerneldoc
James Hogan [Mon, 25 Mar 2013 14:35:07 +0000 (14:35 +0000)]
clk: fix clk_mux::flags kerneldoc

The kerneldoc comment for struct clk_mux documented the non-existent
num_clks instead of flags. Correct this.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: allow reentrant calls into the clk framework
Mike Turquette [Thu, 28 Mar 2013 20:59:02 +0000 (13:59 -0700)]
clk: allow reentrant calls into the clk framework

Reentrancy into the clock framework is necessary for clock operations
that result in nested calls to the clk api.  A common example is a clock
that is prepared via an i2c transaction, such as a clock inside of a
discrete audio chip or a power management IC.  The i2c subsystem itself
will use the clk api resulting in a deadlock:

clk_prepare(audio_clk)
i2c_transfer(..)
clk_prepare(i2c_controller_clk)

The ability to reenter the clock framework prevents this deadlock.

Other use cases exist such as allowing .set_rate callbacks to call
clk_set_parent to achieve the best rate, or to save power in certain
configurations.  Yet another example is performing pinctrl operations
from a clk_ops callback.  Calls into the pinctrl subsystem may call
clk_{un}prepare on an unrelated clock.  Allowing for nested calls to
reenter the clock framework enables both of these use cases.

Reentrancy is implemented by two global pointers that track the owner
currently holding a global lock.  One pointer tracks the owner during
sleepable, mutex-protected operations and the other one tracks the owner
during non-interruptible, spinlock-protected operations.

When the clk framework is entered we try to hold the global lock.  If it
is held we compare the current task against the current owner; a match
implies a nested call and we reenter.  If the values do not match then
we block on the lock until it is released.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
11 years agoclk: abstract locking out into helper functions
Mike Turquette [Thu, 28 Mar 2013 20:59:01 +0000 (13:59 -0700)]
clk: abstract locking out into helper functions

Create locking helpers for the global mutex and global spinlock.  The
definitions of these helpers will be expanded upon in the next patch
which introduces reentrancy into the locking scheme.

Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
11 years agoclk: zynq: Add missing zynq clk header
Michal Simek [Wed, 27 Mar 2013 14:45:06 +0000 (15:45 +0100)]
clk: zynq: Add missing zynq clk header

Include zynq clk header where init function is declared.

It removes this sparse warning:
drivers/clk/clk-zynq.c:373:13: warning: symbol
'xilinx_zynq_clocks_init' was not declared. Should it be static?

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: sunxi: rename compatible strings
Emilio López [Wed, 27 Mar 2013 02:39:17 +0000 (23:39 -0300)]
clk: sunxi: rename compatible strings

During the introduction of the Allwinner SoC platforms, sunxi was
initially meant as a generic name for all the variants of the Allwinner
SoC.

It was ok at the time of the support of only the A10 and A13 that
look pretty much the same; but it's beginning to be troublesome with
the future addition of the Allwinner A31 (sun6i) that is quite
different, and would introduce some weird logic, where sunxi would
actually mean in some case sun4i and sun5i but without sun6i...

Moreover, it makes the compatible strings naming scheme not consistent
with other architectures, where usually for this kind of compability, we
just use the oldest SoC name that has this IP, so let's do just this.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoarm: sunxi: Add useful information about sunxi clocks
Emilio López [Mon, 25 Feb 2013 14:44:28 +0000 (11:44 -0300)]
arm: sunxi: Add useful information about sunxi clocks

This patch contains useful bits of information about the sunxi clocks
that may help and/or be interesting for current and future developers.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: arm: sunxi: Add a new clock driver for sunxi SOCs
Emilio López [Mon, 25 Feb 2013 14:44:26 +0000 (11:44 -0300)]
clk: arm: sunxi: Add a new clock driver for sunxi SOCs

This commit implements the base CPU clocks for sunxi devices. It has
been tested using a slightly modified cpufreq driver from the
linux-sunxi 3.0 tree.

Additionally, document the new bindings introduced by this patch.

Idling:
    / # cat /sys/kernel/debug/clk/clk_summary
       clock                        enable_cnt  prepare_cnt  rate
    ---------------------------------------------------------------------
     osc32k                         0           0            32768
     osc24M_fixed                   0           0            24000000
        osc24M                      0           0            24000000
           apb1_mux                 0           0            24000000
              apb1                  0           0            24000000
           pll1                     0           0            60000000
              cpu                   0           0            60000000
                 axi                0           0            60000000
                    ahb             0           0            60000000
                       apb0         0           0            30000000
     dummy                          0           0            0

After "yes >/dev/null &":
    / # cat /sys/kernel/debug/clk/clk_summary
       clock                        enable_cnt  prepare_cnt  rate
    ---------------------------------------------------------------------
     osc32k                         0           0            32768
     osc24M_fixed                   0           0            24000000
        osc24M                      0           0            24000000
           apb1_mux                 0           0            24000000
              apb1                  0           0            24000000
           pll1                     0           0            1008000000
              cpu                   0           0            1008000000
                 axi                0           0            336000000
                    ahb             0           0            168000000
                       apb0         0           0            84000000
     dummy                          0           0            0

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: ux500: Fix prcmu clocks registration
Maxime Coquelin [Tue, 26 Mar 2013 14:27:15 +0000 (15:27 +0100)]
clk: ux500: Fix prcmu clocks registration

In clk_reg_prcmu(), clk->hw.init field is assigned with a
reference local to clk_reg_prcmu() function.

This patch replaces references to clk->hw.init with calls
to __clk_get_name when called after clock registration.

This patch applies on top of v3.9-rc4.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: resolved trivial merge issues]

11 years agoARM: imx: adapt clk_busy_mux to new clk_mux struct
Fabio Estevam [Tue, 26 Mar 2013 13:42:10 +0000 (10:42 -0300)]
ARM: imx: adapt clk_busy_mux to new clk_mux struct

Commit ce4f3313b05 (clk: add table lookup to mux) caused the following build
error on imx_v4_v5_defconfig/imx_v6_v7_defconfig:

arch/arm/mach-imx/clk-busy.c:172:11: error: 'struct clk_mux' has no member named 'width'

Fix it by passing the 'mask' field.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: shortened $SUBJECT line]

11 years agoclk: Add composite clock type
Prashant Gaikwad [Wed, 20 Mar 2013 12:00:34 +0000 (17:30 +0530)]
clk: Add composite clock type

Not all clocks are required to be decomposed into basic clock
types but at the same time want to use the functionality
provided by these basic clock types instead of duplicating.

For example, Tegra SoC has ~100 clocks which can be decomposed
into Mux -> Div -> Gate clock types making the clock count to
~300. Also, parent change operation can not be performed on gate
clock which forces to use mux clock in driver if want to change
the parent.

Instead aggregate the basic clock types functionality into one
clock and just use this clock for all operations. This clock
type re-uses the functionality of basic clock types and not
limited to basic clock types but any hardware-specific
implementation.

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: add table lookup to mux
Peter De Schrijver [Fri, 22 Mar 2013 12:07:53 +0000 (14:07 +0200)]
clk: add table lookup to mux

Add a table lookup feature to the mux clock. Also allow arbitrary masks
instead of the width. This will be used by some clocks on Tegra114. Also
adapt the tegra periph clk because it uses struct clk_mux directly.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Fix incorrect return type in clk.c
Sachin Kamat [Wed, 13 Mar 2013 09:47:49 +0000 (15:17 +0530)]
clk: Fix incorrect return type in clk.c

Return type of function clk_propagate_rate_change is a pointer.
But 0 was being returned. Change it to NULL.
Silences the following warning:
drivers/clk/clk.c:977:24: warning: Using plain integer as NULL pointer

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: prima2: fix return value check in sirfsoc_of_clk_init()
Wei Yongjun [Mon, 11 Mar 2013 15:55:18 +0000 (23:55 +0800)]
clk: prima2: fix return value check in sirfsoc_of_clk_init()

In case of error, the function clk_get() returns ERR_PTR()
not NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added missing parenthesis to fix compile break]

11 years agoclk:SPEAr1340: Correct parent clock configuration
Vipul Kumar Samar [Thu, 7 Mar 2013 07:05:24 +0000 (12:35 +0530)]
clk:SPEAr1340: Correct parent clock configuration

This patch corrects wrongly configured parent clock for following
devices:

   * Video enc/decoder
   * Video ip
   * Pin control
   * ACP
   * camx

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Reviewed-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agodocumentation: clk: fix couple of misspelling
Eduardo Valentin [Thu, 28 Feb 2013 13:59:07 +0000 (09:59 -0400)]
documentation: clk: fix couple of misspelling

Correcting misspelling inside the clk.txt.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Add axi-clkgen driver
Lars-Peter Clausen [Mon, 11 Mar 2013 15:22:29 +0000 (16:22 +0100)]
clk: Add axi-clkgen driver

This driver adds support for the AXI clkgen pcore to the common clock framework.
The AXI clkgen pcore is a AXI front-end to the MMCM_ADV frequency synthesizer
commonly found in Xilinx FPGAs.

The AXI clkgen pcore is used in Analog Devices' reference designs targeting
Xilinx FPGAs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: ux500: Support is_prepared callback for clk-prcmu
Ulf Hansson [Tue, 12 Mar 2013 19:26:05 +0000 (20:26 +0100)]
clk: ux500: Support is_prepared callback for clk-prcmu

To be able to gate unused prcmu clocks from the clk_disable_unused sequence,
clk-prcmu now implements the is_prepared callback.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Introduce optional unprepare_unused callback
Ulf Hansson [Tue, 12 Mar 2013 19:26:04 +0000 (20:26 +0100)]
clk: Introduce optional unprepare_unused callback

An unprepare_unused callback is introduced due to the same reasons to
why the disable_unused callback was added.

During the clk_disable_unused sequence, those clk_hw that needs specific
treatment with regards to being unprepared, shall implement the
unprepare_unused callback.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: Unprepare the unused prepared slow clocks at late init
Ulf Hansson [Tue, 12 Mar 2013 19:26:03 +0000 (20:26 +0100)]
clk: Unprepare the unused prepared slow clocks at late init

The unused ungated fast clocks are already being disabled from
clk_disable_unused at late init. This patch extend this sequence
to the slow unused prepared clocks to be unprepared.

Unless the optional .is_prepared callback is implemented by a
clk_hw the clk_disable_unused sequence will not unprepare any
unused clocks, since it will fall back to use the software
prepare counter.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed hlist accessors per b67bfe0d]

11 years agoclk: Introduce optional is_prepared callback
Ulf Hansson [Tue, 12 Mar 2013 19:26:02 +0000 (20:26 +0100)]
clk: Introduce optional is_prepared callback

To reflect whether a clk_hw is prepared the clk_hw may implement
the optional is_prepared callback. If not implemented we fall back
to use the software prepare counter.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoclk: mxs: Fix sparse warnings
Fabio Estevam [Mon, 11 Feb 2013 14:07:16 +0000 (12:07 -0200)]
clk: mxs: Fix sparse warnings

Fix the following sparse warnings:

drivers/clk/mxs/clk.c:17:1: warning: symbol 'mxs_lock' was not declared. Should it be static?
drivers/clk/mxs/clk.c:19:5: warning: symbol 'mxs_clk_wait' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
11 years agoLinux 3.9-rc3
Linus Torvalds [Sun, 17 Mar 2013 22:59:32 +0000 (15:59 -0700)]
Linux 3.9-rc3

11 years agoperf,x86: fix link failure for non-Intel configs
David Rientjes [Sun, 17 Mar 2013 22:49:10 +0000 (15:49 -0700)]
perf,x86: fix link failure for non-Intel configs

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

arch/x86/power/built-in.o: In function `restore_processor_state':
(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoperf,x86: fix wrmsr_on_cpu() warning on suspend/resume
Linus Torvalds [Sun, 17 Mar 2013 22:44:43 +0000 (15:44 -0700)]
perf,x86: fix wrmsr_on_cpu() warning on suspend/resume

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.

Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sun, 17 Mar 2013 18:04:14 +0000 (11:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "Eric's rcu barrier patch fixes a long standing problem with our
  unmount code hanging on to devices in workqueue helpers.  Liu Bo
  nailed down a difficult assertion for in-memory extent mappings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix warning of free_extent_map
  Btrfs: fix warning when creating snapshots
  Btrfs: return as soon as possible when edquot happens
  Btrfs: return EIO if we have extent tree corruption
  btrfs: use rcu_barrier() to wait for bdev puts at unmount
  Btrfs: remove btrfs_try_spin_lock
  Btrfs: get better concurrency for snapshot-aware defrag work

11 years agoBtrfs: fix warning of free_extent_map
Liu Bo [Fri, 15 Mar 2013 14:46:39 +0000 (08:46 -0600)]
Btrfs: fix warning of free_extent_map

Users report that an extent map's list is still linked when it's actually
going to be freed from cache.

The story is that

a) when we're going to drop an extent map and may split this large one into
smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means
that it's on the list to be logged, then the smaller ems split from it will also
be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected.

b) we'll keep ems from unlinking the list and freeing when they are flagged with
EXTENT_FLAG_LOGGING, because the log code holds one reference.

The end result is the warning, but the truth is that we set the flag
EXTENT_FLAG_LOGGING only during fsync.

So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one.

Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agoMerge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sat, 16 Mar 2013 01:06:55 +0000 (18:06 -0700)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fix from Michal Marek:
 "One fix for for make headers_install/headers_check to not require make
  3.81.  The requirement has been accidentally introduced in 3.7."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: fix make headers_check with make 3.80

11 years agoMerge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux
Linus Torvalds [Sat, 16 Mar 2013 01:05:37 +0000 (18:05 -0700)]
Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux

Pull OpenRISC bug fixes from Jonas Bonn:

 - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits
   for OpenRISC were.  We now require GPIOLIB as this is the preferred
   way forward.

 - The system.h split introduced a bug in llist.h for arches using
   asm-generic/cmpxchg.h directly, which is currently only OpenRISC.
   The patch here moves two defines from asm-generic/atomic.h to
   asm-generic/cmpxchg.h to make things work as they should.

 - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does
   not have the virt_to_bus methods, so there's a patch to remove it
   again.

* tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux:
  openrisc: remove HAVE_VIRT_TO_BUS
  asm-generic: move cmpxchg*_local defs to cmpxchg.h
  openrisc: require gpiolib

11 years agoMerge tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 16 Mar 2013 01:04:38 +0000 (18:04 -0700)]
Merge tag 'char-misc-3.9-rc2' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg Kroah-Hartman:
 "Here are some tiny fixes for the w1 drivers and the final removal
  patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now
  gone from your tree, this just drops the Kconfig item itself.)

  All have been in the linux-next tree for a while"

* tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  final removal of CONFIG_EXPERIMENTAL
  w1: fix oops when w1_search is called from netlink connector
  w1-gpio: fix unused variable warning
  w1-gpio: remove erroneous __exit and __exit_p()
  ARM: w1-gpio: fix erroneous gpio requests

11 years agoMerge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Sat, 16 Mar 2013 00:35:49 +0000 (17:35 -0700)]
Merge tag 'sound-3.9' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes, as expected for the middle rc:
   - A couple of fixes for potential NULL dereferences and out-of-range
     array accesses revealed by static code parsers
   - A fix for the wrong error handling detected by trinity
   - A regression fix for missing audio on some MacBooks
   - CA0132 DSP loader fixes
   - Fix for EAPD control of IDT codecs on machines w/o speaker
   - Fix a regression in the HD-audio widget list parser code
   - Workaround for the NuForce UDH-100 USB audio"

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
  sound: sequencer: cap array index in seq_chn_common_event()
  ALSA: hda/ca0132 - Remove extra setting of dsp_state.
  ALSA: hda/ca0132 - Check download state of DSP.
  ALSA: hda/ca0132 - Check if dspload_image succeeded.
  ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
  ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
  ALSA: usb-audio: add a workaround for the NuForce UDH-100
  ALSA: asihpi - fix potential NULL pointer dereference
  ALSA: seq: Fix missing error handling in snd_seq_timer_open()

11 years agoMerge branch 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma...
Linus Torvalds [Sat, 16 Mar 2013 00:35:03 +0000 (17:35 -0700)]
Merge branch 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull DMA-mapping fix from Marek Szyprowski:
 "An important fix for all ARM architectures which use ZONE_DMA.
  Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated
  buffers outsize DMA zone."

* 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation

11 years agoMerge tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo...
Linus Torvalds [Sat, 16 Mar 2013 00:34:01 +0000 (17:34 -0700)]
Merge tag 'mfd-fixes-3.9-1' of git://git./linux/kernel/git/sameo/mfd-fixes

Pull MFD fixes from Samuel Ortiz:
 "This is the first batch of MFD fixes for 3.9.

  With this one we have:

   - An ab8500 build failure fix.
   - An ab8500 device tree parsing fix.
   - A fix for twl4030_madc remove routine to work properly (when
     built-in).
   - A fix for properly registering palmas interrupt handler.
   - A fix for omap-usb init routine to actually write into the
     hostconfig register.
   - A couple of warning fixes for ab8500-gpadc and tps65912"

* tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: twl4030-madc: Remove __exit_p annotation
  mfd: ab8500: Kill "reg" property from binding
  mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO
  mfd: wm831x: Don't forward declare enum wm831x_auxadc
  mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()
  mfd: tps65912: Declare and use tps65912_irq_exit()
  mfd: palmas: Provide irq flags through DT/platform data
  mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error
  mfd: omap-usb-host: Actually update hostconfig

11 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Sat, 16 Mar 2013 00:33:13 +0000 (17:33 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Bug fixes for pmbus, ltc2978, and lineage-pem drivers

  Added specific maintainer for some hwmon drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/ltc2978) Fix temperature reporting
  hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
  hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
  MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers

11 years agoperf,x86: fix kernel crash with PEBS/BTS after suspend/resume
Stephane Eranian [Fri, 15 Mar 2013 13:26:07 +0000 (14:26 +0100)]
perf,x86: fix kernel crash with PEBS/BTS after suspend/resume

This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.

The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
Takashi Iwai [Fri, 15 Mar 2013 13:23:32 +0000 (14:23 +0100)]
ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs

During the transition to the generic parser, the hook to the codec
specific automute function was forgotten.  This resulted in the silent
output on some MacBooks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agosound: sequencer: cap array index in seq_chn_common_event()
Dan Carpenter [Fri, 15 Mar 2013 06:14:22 +0000 (09:14 +0300)]
sound: sequencer: cap array index in seq_chn_common_event()

"chn" here is a number between 0 and 255, but ->chn_info[] only has
16 elements so there is a potential write beyond the end of the
array.

If the seq_mode isn't SEQ_2 then we let the individual drivers
(either opl3.c or midi_synth.c) handle it.  Those functions all
do a bounds check on "chn" so I haven't changed anything here.
The opl3.c driver has up to 18 channels and not 16.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agomfd: twl4030-madc: Remove __exit_p annotation
Arnd Bergmann [Thu, 14 Mar 2013 21:56:38 +0000 (22:56 +0100)]
mfd: twl4030-madc: Remove __exit_p annotation

4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation
on the twl4030_madc_remove function, but left an __exit_p() present on the
pointer to this function. Using __exit_p was as wrong with the devexit in
place as it is now, but now we get a gcc warning about an unused function.

In order for the twl4030_madc_remove to work correctly in built-in code, we
have to remove the __exit_p.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
11 years agoALSA: hda/ca0132 - Remove extra setting of dsp_state.
Dylan Reid [Fri, 15 Mar 2013 00:27:46 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Remove extra setting of dsp_state.

spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset
and check it in ca0132_download_dsp().

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agoALSA: hda/ca0132 - Check download state of DSP.
Dylan Reid [Fri, 15 Mar 2013 00:27:45 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Check download state of DSP.

Instead of using the dspload_is_loaded() function, check the dsp_state
that is kept in the spec.  The dspload_is_loaded() function returns
true if the DSP transfer was never started.  This false-positive leads
to multiple second delays when ca0132_setup_efaults() times out on
each write.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agoALSA: hda/ca0132 - Check if dspload_image succeeded.
Dylan Reid [Fri, 15 Mar 2013 00:27:44 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Check if dspload_image succeeded.

If dspload_image() fails, it was ignored and dspload_wait_loaded() was
still called.  dsp_loaded should never be set to true in this case,
skip it.  The check in dspload_wait_loaded() return true if the DSP is
loaded or if it never started.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agomm/fremap.c: fix possible oops on error path
Michel Lespinasse [Thu, 14 Mar 2013 23:50:02 +0000 (16:50 -0700)]
mm/fremap.c: fix possible oops on error path

The vm_flags introduced in 6d7825b10dbe ("mm/fremap.c: fix oops on error
path") is supposed to avoid a compiler warning about unitialized
vm_flags without changing the generated code.

However I am concerned that this is going to be very brittle, and fail
with some compiler versions. The failure could be either of:

- compiler could actually load vma->vm_flags before checking for the
  !vma condition, thus reintroducing the oops

- compiler could optimize out the !vma check, since the pointer just got
  dereferenced shortly before (so the compiler knows it can't be NULL!)

I propose reversing this part of the change and initializing vm_flags to 0
just to avoid the bogus uninitialized use warning.

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck...
Linus Torvalds [Thu, 14 Mar 2013 21:53:07 +0000 (14:53 -0700)]
Merge branch 'rcu/urgent' of git://git./linux/kernel/git/paulmck/linux-rcu

Pull fix for hlist_entry_safe() regression from Paul McKenney:
 "This contains a single commit that fixes a regression in
  hlist_entry_safe().  This macro references its argument twice, which
  can cause NULL-pointer errors.  This commit applies a gcc statement
  expression, creating a temporary variable to avoid the double
  reference.  This has been posted to LKML at

    https://lkml.org/lkml/2013/3/9/75.

  Kudos to CAI Qian, whose testing uncovered this, to Eric Dumazet, who
  spotted root cause, and to Li Zefan, who tested this commit."

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  list: Fix double fetch of pointer in hlist_entry_safe()

11 years agolist: Fix double fetch of pointer in hlist_entry_safe()
Paul E. McKenney [Sat, 9 Mar 2013 15:38:41 +0000 (07:38 -0800)]
list: Fix double fetch of pointer in hlist_entry_safe()

The current version of hlist_entry_safe() fetches the pointer twice,
once to test for NULL and the other to compute the offset back to the
enclosing structure.  This is OK for normal lock-based use because in
that case, the pointer cannot change.  However, when the pointer is
protected by RCU (as in "rcu_dereference(p)"), then the pointer can
change at any time.  This use case can result in the following sequence
of events:

1. CPU 0 invokes hlist_entry_safe(), fetches the RCU-protected
pointer as sees that it is non-NULL.

2. CPU 1 invokes hlist_del_rcu(), deleting the entry that CPU 0
just fetched a pointer to.  Because this is the last entry
in the list, the pointer fetched by CPU 0 is now NULL.

3. CPU 0 refetches the pointer, obtains NULL, and then gets a
NULL-pointer crash.

This commit therefore applies gcc's "({ })" statement expression to
create a temporary variable so that the specified pointer is fetched
only once, avoiding the above sequence of events.  Please note that
it is the caller's responsibility to use rcu_dereference() as needed.
This allows RCU-protected uses to work correctly without imposing
any additional overhead on the non-RCU case.

Many thanks to Eric Dumazet for spotting root cause!

Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Li Zefan <lizefan@huawei.com>
11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Linus Torvalds [Thu, 14 Mar 2013 19:11:28 +0000 (12:11 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs

Pull ext2, ext3, reiserfs, quota fixes from Jan Kara:
 "A fix for regression in ext2, and a format string issue in ext3.  The
  rest isn't too serious."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix BUG_ON in evict() on inode deletion
  reiserfs: Use kstrdup instead of kmalloc/strcpy
  ext3: Fix format string issues
  quota: add missing use of dq_data_lock in __dquot_initialize

11 years agoBtrfs: fix warning when creating snapshots
Liu Bo [Wed, 13 Mar 2013 13:43:03 +0000 (07:43 -0600)]
Btrfs: fix warning when creating snapshots

Creating snapshot passes extent_root to commit its transaction,
but it can lead to the warning of checking root for quota in
the __btrfs_end_transaction() when someone else is committing
the current transaction.  Since we've recorded the needed root
in trans_handle, just use it to get rid of the warning.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agoBtrfs: return as soon as possible when edquot happens
Wang Shilong [Wed, 6 Mar 2013 11:51:47 +0000 (11:51 +0000)]
Btrfs: return as soon as possible when edquot happens

If one of qgroup fails to reserve firstly, we should return immediately,
it is unnecessary to continue check.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agoBtrfs: return EIO if we have extent tree corruption
Josef Bacik [Fri, 8 Mar 2013 20:41:02 +0000 (15:41 -0500)]
Btrfs: return EIO if we have extent tree corruption

The callers of lookup_inline_extent_info all handle getting an error back
properly, so return an error if we have corruption instead of being a jerk and
panicing.  Still WARN_ON() since this is kind of crucial and I've been seeing it
a bit too much recently for my taste, I think we're doing something wrong
somewhere.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agobtrfs: use rcu_barrier() to wait for bdev puts at unmount
Eric Sandeen [Sat, 9 Mar 2013 15:18:39 +0000 (15:18 +0000)]
btrfs: use rcu_barrier() to wait for bdev puts at unmount

Doing this would reliably fail with -EBUSY for me:

# mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2
...
unable to open /dev/sdb2: Device or resource busy

because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it.

Using systemtap to track bdev gets & puts shows a kworker thread doing a
blkdev put after mkfs attempts a get; this is left over from the unmount
path:

btrfs_close_devices
__btrfs_close_devices
call_rcu(&device->rcu, free_device);
free_device
INIT_WORK(&device->rcu_work, __free_device);
schedule_work(&device->rcu_work);

so unmount might complete before __free_device fires & does its blkdev_put.

Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait
until all blkdev_put()s are done, and the device is truly free once
unmount completes.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agoBtrfs: remove btrfs_try_spin_lock
Liu Bo [Mon, 11 Mar 2013 09:37:45 +0000 (09:37 +0000)]
Btrfs: remove btrfs_try_spin_lock

Remove a useless function declaration

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agoBtrfs: get better concurrency for snapshot-aware defrag work
Liu Bo [Mon, 11 Mar 2013 09:20:58 +0000 (09:20 +0000)]
Btrfs: get better concurrency for snapshot-aware defrag work

Using spinning case instead of blocking will result in better concurrency
overall.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
11 years agohwmon: (pmbus/ltc2978) Fix temperature reporting
Guenter Roeck [Thu, 21 Feb 2013 18:27:54 +0000 (10:27 -0800)]
hwmon: (pmbus/ltc2978) Fix temperature reporting

On LTC2978, only READ_TEMPERATURE is supported. It reports
the internal junction temperature. This register is unpaged.

On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported.
READ_TEMPERATURE is paged and reports external temperatures.
READ_TEMPERATURE2 is unpaged and reports the internal junction
temperature.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.2+
Acked-by: Jean Delvare <khali@linux-fr.org>
11 years agoALSA: hda - Disable IDT eapd_switch if there are no internal speakers
David Henningsson [Thu, 14 Mar 2013 14:28:29 +0000 (15:28 +0100)]
ALSA: hda - Disable IDT eapd_switch if there are no internal speakers

If there are no internal speakers, we should not turn the eapd switch
off, because it might be necessary to keep high for Headphone.

BugLink: https://bugs.launchpad.net/bugs/1155016
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
11 years agohwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
David Woodhouse [Thu, 14 Mar 2013 13:30:20 +0000 (13:30 +0000)]
hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()

If krealloc() returns NULL, it *doesn't* free the original. So any code
of the form 'foo = krealloc(foo, …);' is almost certainly a bug.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
11 years agohwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
Axel Lin [Thu, 14 Mar 2013 08:27:18 +0000 (16:27 +0800)]
hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: stable@vger.kernel.org
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
11 years agoARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
Marek Szyprowski [Tue, 26 Feb 2013 06:46:24 +0000 (07:46 +0100)]
ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation

Atomic pool should always be allocated from DMA zone if such zone is
available in the system to avoid issues caused by limited dma mask of
any of the devices used for making an atomic allocation.

Reported-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Stable <stable@vger.kernel.org> [v3.6+]
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...
Linus Torvalds [Wed, 13 Mar 2013 22:47:50 +0000 (15:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull namespace bugfixes from Eric Biederman:
 "This tree includes a partial revert for "fs: Limit sys_mount to only
  request filesystem modules." When I added the new style module aliases
  to the filesystems I deleted the old ones.  A bad move.  It turns out
  that distributions like Arch linux use module aliases when
  constructing ramdisks.  Which meant ultimately that an ext3 filesystem
  mounted with ext4 would not result in the ext4 module being put into
  the ramdisk.

  The other change in this tree adds a handful of filesystem module
  alias I simply failed to add the first time.  Which inconvinienced a
  few folks using cifs.

  I don't want to inconvinience folks any longer than I have to so here
  are these trivial fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  fs: Readd the fs module aliases.
  fs: Limit sys_mount to only request filesystem modules. (Part 3)

11 years agoMerge branch 'akpm' (fixes from Andrew)
Linus Torvalds [Wed, 13 Mar 2013 22:21:57 +0000 (15:21 -0700)]
Merge branch 'akpm' (fixes from Andrew)

Merge misc fixes from Andrew Morton:

 - A bunch of fixes

 - Finish off the idr API conversions before someone starts to use the
   old interfaces again.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  idr: idr_alloc() shouldn't trigger lowmem warning when preloaded
  UAPI: fix endianness conditionals in M32R's asm/stat.h
  UAPI: fix endianness conditionals in linux/raid/md_p.h
  UAPI: fix endianness conditionals in linux/acct.h
  UAPI: fix endianness conditionals in linux/aio_abi.h
  decompressors: fix typo "POWERPC"
  mm/fremap.c: fix oops on error path
  idr: deprecate idr_pre_get() and idr_get_new[_above]()
  tidspbridge: convert to idr_alloc()
  zcache: convert to idr_alloc()
  mlx4: remove leftover idr_pre_get() call
  workqueue: convert to idr_alloc()
  nfsd: convert to idr_alloc()
  nfsd: remove unused get_new_stid()
  kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
  signal: always clear sa_restorer on execve
  mm: remove_memory(): fix end_pfn setting
  include/linux/res_counter.h needs errno.h

11 years agoidr: idr_alloc() shouldn't trigger lowmem warning when preloaded
Tejun Heo [Wed, 13 Mar 2013 21:59:49 +0000 (14:59 -0700)]
idr: idr_alloc() shouldn't trigger lowmem warning when preloaded

GFP_NOIO is often used for idr_alloc() inside preloaded section as the
allocation mask doesn't really matter.  If the idr tree needs to be
expanded, idr_alloc() first tries to allocate using the specified
allocation mask and if it fails falls back to the preloaded buffer.  This
order prevent non-preloading idr_alloc() users from taking advantage of
preloading ones by using preload buffer without filling it shifting the
burden of allocation to the preload users.

Unfortunately, this allowed/expected-to-fail kmem_cache allocation ends up
generating spurious slab lowmem warning before succeeding the request from
the preload buffer.

This patch makes idr_layer_alloc() add __GFP_NOWARN to the first
kmem_cache attempt and try kmem_cache again w/o __GFP_NOWARN after
allocation from preload_buffer fails so that lowmem warning is generated
if not suppressed by the original @gfp_mask.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Teigland <teigland@redhat.com>
Tested-by: David Teigland <teigland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUAPI: fix endianness conditionals in M32R's asm/stat.h
David Howells [Wed, 13 Mar 2013 21:59:48 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in M32R's asm/stat.h

In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).

However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.

The definition of struct stat64 in M32R's asm/stat.h is wrong in this way.
 Note that userspace will likely interpret the field order incorrectly as
the big-endian variant on little-endian machines - depending on header
inclusion order.

[!!!] NOTE [!!!]  This patch may adversely change the userspace API.  It might
be better to fix the ordering of st_blocks and __pad4 in struct stat64.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUAPI: fix endianness conditionals in linux/raid/md_p.h
David Howells [Wed, 13 Mar 2013 21:59:47 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/raid/md_p.h

In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).

However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.

The definition of struct mdp_superblock_s in linux/raid/md_p.h is wrong in
this way.  Note that userspace will likely interpret the ordering of the
fields incorrectly as the big-endian variant on a little-endian machines -
depending on header inclusion order.

[!!!] NOTE [!!!]  This patch may adversely change the userspace API.  It might
be better to fix the ordering of events_hi, events_lo, cp_events_hi and
cp_events_lo in struct mdp_superblock_s / typedef mdp_super_t.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUAPI: fix endianness conditionals in linux/acct.h
David Howells [Wed, 13 Mar 2013 21:59:46 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/acct.h

In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).

However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.

The definition of ACCT_BYTEORDER in linux/acct.h is wrong in this way.
Note that userspace will likely interpret this incorrectly as the
big-endian variant on little-endian machines - depending on header
inclusion order.

[!!!] NOTE [!!!]  This patch may adversely change the userspace API.  It might
be better to fix the value of ACCT_BYTEORDER.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUAPI: fix endianness conditionals in linux/aio_abi.h
David Howells [Wed, 13 Mar 2013 21:59:45 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/aio_abi.h

In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).

However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.

The definition of PADDED() in linux/aio_abi.h is wrong in this way.  Note
that userspace will likely interpret this and thus the order of fields in
struct iocb incorrectly as the little-endian variant on big-endian
machines - depending on header inclusion order.

[!!!] NOTE [!!!]  This patch may adversely change the userspace API.  It might
be better to fix the ordering of aio_key and aio_reserved1 in struct iocb.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodecompressors: fix typo "POWERPC"
Paul Bolle [Wed, 13 Mar 2013 21:59:44 +0000 (14:59 -0700)]
decompressors: fix typo "POWERPC"

Commit 5dc49c75a26b ("decompressors: make the default XZ_DEC_* config
match the selected architecture") added

default y if POWERPC

to lib/xz/Kconfig.  But there is no Kconfig symbol POWERPC.  The most
general Kconfig symbol for the powerpc architecture is PPC.  So let's
use that.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Lasse Collin <lasse.collin@tukaani.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm/fremap.c: fix oops on error path
Andrew Morton [Wed, 13 Mar 2013 21:59:43 +0000 (14:59 -0700)]
mm/fremap.c: fix oops on error path

If find_vma() fails, sys_remap_file_pages() will dereference `vma', which
contains NULL.  Fix it by checking the pointer.

(We could alternatively check for err==0, but this seems more direct)

(The vm_flags change is to squish a bogus used-uninitialised warning
without adding extra code).

Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoidr: deprecate idr_pre_get() and idr_get_new[_above]()
Tejun Heo [Wed, 13 Mar 2013 21:59:42 +0000 (14:59 -0700)]
idr: deprecate idr_pre_get() and idr_get_new[_above]()

Now that all in-kernel users are converted to ues the new alloc
interface, mark the old interface deprecated.  We should be able to
remove these in a few releases.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agotidspbridge: convert to idr_alloc()
Tejun Heo [Wed, 13 Mar 2013 21:59:41 +0000 (14:59 -0700)]
tidspbridge: convert to idr_alloc()

idr_get_new*() and friends are about to be deprecated.  Convert to the
new idr_alloc() interface.

There are some peculiarities and possible bugs in the converted
functions.  This patch preserves those.

* drv_insert_node_res_element() returns -ENOMEM on alloc failure,
  -EFAULT if id space is exhausted.  -EFAULT is at best misleading.

* drv_proc_insert_strm_res_element() is even weirder.  It returns
  -EFAULT if kzalloc() fails, -ENOMEM if idr preloading fails and
  -EPERM if id space is exhausted.  What's going on here?

* drv_proc_insert_strm_res_element() doesn't free *pstrm_res after
  failure.

Only compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Cc: Rene Sapiens <rene.sapiens@ti.com>
Cc: Armando Uribe <x0095078@ti.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agozcache: convert to idr_alloc()
Tejun Heo [Wed, 13 Mar 2013 21:59:40 +0000 (14:59 -0700)]
zcache: convert to idr_alloc()

idr_get_new*() and friends are about to be deprecated.  Convert to the
new idr_alloc() interface.

Only compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomlx4: remove leftover idr_pre_get() call
Tejun Heo [Wed, 13 Mar 2013 21:59:39 +0000 (14:59 -0700)]
mlx4: remove leftover idr_pre_get() call

Commit 6a9200603d76 ("IB/mlx4: convert to idr_alloc()") forgot to remove
idr_pre_get() call in mlx4_ib_cm_paravirt_init().  It's unnecessary and
idr_pre_get() will soon be deprecated.  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoworkqueue: convert to idr_alloc()
Tejun Heo [Wed, 13 Mar 2013 21:59:38 +0000 (14:59 -0700)]
workqueue: convert to idr_alloc()

idr_get_new*() and friends are about to be deprecated.  Convert to the
new idr_alloc() interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonfsd: convert to idr_alloc()
Tejun Heo [Wed, 13 Mar 2013 21:59:37 +0000 (14:59 -0700)]
nfsd: convert to idr_alloc()

idr_get_new*() and friends are about to be deprecated.  Convert to the
new idr_alloc() interface.

Only compile-tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonfsd: remove unused get_new_stid()
Tejun Heo [Wed, 13 Mar 2013 21:59:36 +0000 (14:59 -0700)]
nfsd: remove unused get_new_stid()

get_new_stid() is no longer used since commit 3abdb607125 ("nfsd4:
simplify idr allocation").  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
Andrew Morton [Wed, 13 Mar 2013 21:59:34 +0000 (14:59 -0700)]
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER

__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and
later kernels, per Kees.

Cc: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosignal: always clear sa_restorer on execve
Kees Cook [Wed, 13 Mar 2013 21:59:33 +0000 (14:59 -0700)]
signal: always clear sa_restorer on execve

When the new signal handlers are set up, the location of sa_restorer is
not cleared, leaking a parent process's address space location to
children.  This allows for a potential bypass of the parent's ASLR by
examining the sa_restorer value returned when calling sigaction().

Based on what should be considered "secret" about addresses, it only
matters across the exec not the fork (since the VMAs haven't changed
until the exec).  But since exec sets SIG_DFL and keeps sa_restorer,
this is where it should be fixed.

Given the few uses of sa_restorer, a "set" function was not written
since this would be the only use.  Instead, we use
__ARCH_HAS_SA_RESTORER, as already done in other places.

Example of the leak before applying this patch:

  $ cat /proc/$$/maps
  ...
  7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  $ ./leak
  ...
  7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  1 0 (nil) 0x7fb9f30b94a0
  2 4000000 (nil) 0x7f278bcaa4a0
  3 4000000 (nil) 0x7f278bcaa4a0
  4 0 (nil) 0x7fb9f30b94a0
  ...

[akpm@linux-foundation.org: use SA_RESTORER for backportability]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: remove_memory(): fix end_pfn setting
Toshi Kani [Wed, 13 Mar 2013 21:59:31 +0000 (14:59 -0700)]
mm: remove_memory(): fix end_pfn setting

remove_memory() calls walk_memory_range() with [start_pfn, end_pfn), where
end_pfn is exclusive in this range.  Therefore, end_pfn needs to be set to
the next page of the end address.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinclude/linux/res_counter.h needs errno.h
Andrew Morton [Wed, 13 Mar 2013 21:59:30 +0000 (14:59 -0700)]
include/linux/res_counter.h needs errno.h

alpha allmodconfig:

  In file included from mm/memcontrol.c:28:
  include/linux/res_counter.h: In function 'res_counter_set_limit':
  include/linux/res_counter.h:203: error: 'EBUSY' undeclared (first use in this function)
  include/linux/res_counter.h:203: error: (Each undeclared identifier is reported only once
  include/linux/res_counter.h:203: error: for each function it appears in.)

Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Wed, 13 Mar 2013 22:03:48 +0000 (15:03 -0700)]
Merge tag 'usb-3.9-rc2' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB fixes and new USB device ids for your
  3.9 tree.

  The "largest" one here is a revert of a usb-storage patch that turned
  out to be incorrect, breaking existing users, which is never a good
  thing.  Everything else is pretty simple and small"

* tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
  USB: quatech2: only write to the tty if the port is open.
  qcserial: bind to DM/DIAG port on Gobi 1K devices
  USB: cdc-wdm: fix buffer overflow
  usb: serial: Add Rigblaster Advantage to device table
  qcaux: add Franklin U600
  usb: musb: core: fix possible build error with randconfig
  usb: cp210x new Vendor/Device IDs
  usb: gadget: pxa25x: fix disconnect reporting
  usb: dwc3: ep0: fix sparc64 build
  usb: c67x00 RetryCnt value in c67x00 TD should be 3
  usb: Correction to c67x00 TD data length mask
  usb: Makefile: fix drivers/usb/phy/ Makefile entry
  USB: added support for Cinterion's products AH6 and PLS8
  usb: gadget: fix omap_udc build errors
  USB: storage: fix Huawei mode switching regression
  USB: storage: in-kernel modeswitching is deprecated
  tools: usb: ffs-test: Fix build failure
  USB: option: add Huawei E5331
  usb: musb: omap2430: fix sparse warning
  usb: musb: omap2430: fix omap_musb_mailbox glue check again
  ...

11 years agoMerge tag 'tty-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Wed, 13 Mar 2013 22:02:02 +0000 (15:02 -0700)]
Merge tag 'tty-3.9-rc2' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg Kroah-Hartman:
 "Here are some tty/serial driver fixes for 3.9

  We finally mute the annoying WARN_ON that lots of people are hitting
  and it turns out isn't needed anymore.  Also add a few new device ids
  and a some other minor fixes."

* tag 'tty-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fix typo "SERIAL_S3C2412"
  serial: 8250: Keep 8250.<xxxx> module options functional after driver rename
  tty: serial: fix typo "ARCH_S5P6450"
  tty/8250_pnp: serial port detection regression since v3.7
  serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char"
  serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller
  Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards
  tty/serial: Add support for Altera serial port
  tty: serial: vt8500: Unneccessary duplicated clock code removed
  tty: serial: mpc5xxx: fix PSC clock name bug
  TTY: disable debugging warning

11 years agoMerge tag 'staging-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Wed, 13 Mar 2013 22:01:08 +0000 (15:01 -0700)]
Merge tag 'staging-3.9-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are some drivers/staging and drivers/iio fixes for 3.9 (the two
  are still pretty intertwined, hence them coming both from my tree
  still.) Nothing major, just a few things that have been reported by
  users, all of these have been in linux-next for a while."

* tag 'staging-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: dt9812: use CR_CHAN() for channel number
  staging/vt6656: Fix too large integer constant warning on 32-bit
  staging: comedi: drivers: usbduxsigma.c: fix DMA buffers on stack
  staging: imx/drm: request irq only after adding the crtc
  staging: comedi: drivers: usbduxfast.c: fix for DMA buffers on stack
  staging: comedi: drivers: usbdux.c: fix DMA buffers on stack
  staging: vt6656: Fix oops on resume from suspend.
  iio:common:st_sensors fixed all warning messages about uninitialized variables
  iio: Fix build error seen if IIO_TRIGGER is defined but IIO_BUFFER is not
  iio/imu: inv_mpu6050 depends on IIO_BUFFER
  iio:ad5064: Initialize register cache correctly
  iio:ad5064: Fix off by one in DAC value range check
  iio:ad5064: Fix address of the second channel for ad5065/ad5045/ad5025

11 years agouserns: Don't allow CLONE_NEWUSER | CLONE_FS
Eric W. Biederman [Wed, 13 Mar 2013 18:51:49 +0000 (11:51 -0700)]
userns: Don't allow CLONE_NEWUSER | CLONE_FS

Don't allowing sharing the root directory with processes in a
different user namespace.  There doesn't seem to be any point, and to
allow it would require the overhead of putting a user namespace
reference in fs_struct (for permission checks) and incrementing that
reference count on practically every call to fork.

So just perform the inexpensive test of forbidding sharing fs_struct
acrosss processes in different user namespaces.  We already disallow
other forms of threading when unsharing a user namespace so this
should be no real burden in practice.

This updates setns, clone, and unshare to disallow multiple user
namespaces sharing an fs_struct.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUSB: quatech2: only write to the tty if the port is open.
Bill Pemberton [Wed, 13 Mar 2013 13:50:15 +0000 (09:50 -0400)]
USB: quatech2: only write to the tty if the port is open.

The commit 2e124b4a390ca85325fae75764bef92f0547fa25 removed the checks
that prevented qt2_process_read_urb() from trying to put chars into
ttys that weren't actually opened.  This resulted in 'tty is NULL'
warnings from flush_to_ldisc() when the device was used.

The devices use just one read urb for all ports.  As a result
qt2_process_read_urb() may be called with the current port set to a
port number that has not been opened.  Add a check if the port is open
before calling tty_flip_buffer_push().

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoqcserial: bind to DM/DIAG port on Gobi 1K devices
Dan Williams [Wed, 13 Mar 2013 14:58:18 +0000 (09:58 -0500)]
qcserial: bind to DM/DIAG port on Gobi 1K devices

Turns out we just need altsetting 1 and then we can talk to it.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoext2: Fix BUG_ON in evict() on inode deletion
Jan Kara [Wed, 13 Mar 2013 11:57:08 +0000 (12:57 +0100)]
ext2: Fix BUG_ON in evict() on inode deletion

Commit 8e3dffc6 introduced a regression where deleting inode with
large extended attributes leads to triggering
  BUG_ON(inode->i_state != (I_FREEING | I_CLEAR))
in fs/inode.c:evict(). That happens because freeing of xattr block
dirtied the inode and it happened after clear_inode() has been called.

Fix the issue by moving removal of xattr block into ext2_evict_inode()
before clear_inode() call close to a place where data blocks are
truncated. That is also more logical place and removes surprising
requirement that ext2_free_blocks() mustn't dirty the inode.

Reported-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>