Ben Skeggs [Fri, 21 Jan 2011 01:15:16 +0000 (11:15 +1000)]
drm/nvc0: fix incorrect TPC register setup
Was hitting TPC+1's regs by accident, oops.
Reported-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 19 Jan 2011 05:54:10 +0000 (15:54 +1000)]
drm/nouveau: probe for adt7473 before f75375
There's a reported case where probing for f75375 causes the system
to hang completely, in this case there's an adt7473 at the same
i2c address.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 18 Jan 2011 04:46:19 +0000 (14:46 +1000)]
drm/nouveau: remove dead function definition
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Linus Torvalds [Tue, 25 Jan 2011 01:01:33 +0000 (11:01 +1000)]
Merge branch 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msm
* 'for-38-rc3' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
drivers: mmc: msm: remove clock disable in probe
mmc: msm: fix dma usage not to use internal APIs
Linus Torvalds [Tue, 25 Jan 2011 00:46:14 +0000 (10:46 +1000)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq
drm/i915: Prevent uninitialised reads during error state capture
drm/i915: Use consistent mappings for OpRegion between ACPI and i915
drm/i915: Handle the no-interrupts case for UMS by polling
drm/i915: Disable high-precision vblank timestamping for UMS
drm/i915: Increase the amount of defense before computing vblank timestamps
drm/i915,agp/intel: Do not clear stolen entries
drm/radeon/kms: simplify atom adjust pll setup
drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics
drm/radeon/kms: make the mac rv630 quirk generic
drm/radeon/kms: fix a spelling error in an error message
drm/radeon/kms: Initialize pageflip spinlocks.
drm/i915: Recognise non-VGA display devices
drm/i915: Fix use of invalid array size for ring->sync_seqno
drm/i915/ringbuffer: Fix use of stale HEAD position whilst polling for space
drm/i915: Don't kick-off hangcheck after a DRI interrupt
drm/i915: Add dependency on CONFIG_TMPFS
drm/i915: Initialise ring vfuncs for old DRI paths
drm/i915: make the blitter report buffer modifications to the FBC unit
drm/i915: set more FBC chicken bits
David S. Miller [Tue, 25 Jan 2011 00:01:58 +0000 (16:01 -0800)]
ipv6: Always clone offlink routes.
Do not handle PMTU vs. route lookup creation any differently
wrt. offlink routes, always clone them.
Reported-by: PK <runningdoglackey@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Fri, 21 Jan 2011 16:35:18 +0000 (16:35 +0000)]
dcbnl: make get_app handling symmetric for IEEE and CEE DCBx
The IEEE get/set app handlers use generic routines and do not
require the net_device to implement the dcbnl_ops routines. This
patch makes it symmetric so user space and drivers do not have
to handle the CEE version and IEEE DCBx versions differently.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Jan 2011 23:16:11 +0000 (15:16 -0800)]
Merge branch 'can/at91_can-for-net-2.6' of git://git.pengutronix.de/git/mkl/linux-2.6
Dave Airlie [Mon, 24 Jan 2011 22:41:58 +0000 (08:41 +1000)]
Merge branch 'drm-intel-fixes-2' of ssh:///linux/kernel/git/ickle/drm-intel into drm-fixes
* 'drm-intel-fixes-2' of ssh://master.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: (30 commits)
drm/i915: Prevent uninitialised reads during error state capture
drm/i915: Use consistent mappings for OpRegion between ACPI and i915
drm/i915: Handle the no-interrupts case for UMS by polling
drm/i915: Disable high-precision vblank timestamping for UMS
drm/i915: Increase the amount of defense before computing vblank timestamps
drm/i915,agp/intel: Do not clear stolen entries
Remove MAYBE_BUILD_BUG_ON
BUILD_BUG_ON: make it handle more cases
module: fix missing semicolons in MODULE macro usage
param: add null statement to compiled-in module params
module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
module: show version information for built-in modules in sysfs
selinux: return -ENOMEM when memory allocation fails
tpm: fix panic caused by "tpm: Autodetect itpm devices"
TPM: Long default timeout fix
trusted keys: Fix a memory leak in trusted_update().
keys: add trusted and encrypted maintainers
encrypted-keys: rename encrypted_defined files to encrypted
trusted-keys: rename trusted_defined files to trusted
drm/i915: Recognise non-VGA display devices
...
Eric Dumazet [Mon, 24 Jan 2011 22:41:20 +0000 (14:41 -0800)]
tcp: fix bug in listening_get_next()
commit
a8b690f98baf9fb19 (tcp: Fix slowness in read /proc/net/tcp)
introduced a bug in handling of SYN_RECV sockets.
st->offset represents number of sockets found since beginning of
listening_hash[st->bucket].
We should not reset st->offset when iterating through
syn_table[st->sbucket], or else if more than ~25 sockets (if
PAGE_SIZE=4096) are in SYN_RECV state, we exit from listening_get_next()
with a too small st->offset
Next time we enter tcp_seek_last_pos(), we are not able to seek past
already found sockets.
Reported-by: PK <runningdoglackey@yahoo.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Deucher [Mon, 24 Jan 2011 22:14:26 +0000 (17:14 -0500)]
drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq
Needed for timer queries in the 3D driver.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
David S. Miller [Mon, 24 Jan 2011 22:37:46 +0000 (14:37 -0800)]
inetpeer: Use correct AVL tree base pointer in inet_getpeer().
Family was hard-coded to AF_INET but should be daddr->family.
This fixes crashes when unlinking ipv6 peer entries, since the
unlink code was looking up the base pointer properly.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Mon, 24 Jan 2011 12:08:48 +0000 (12:08 +0000)]
GRO: fix merging a paged skb after non-paged skbs
Suppose that several linear skbs of the same flow were received by GRO. They
were thus merged into one skb with a frag_list. Then a new skb of the same flow
arrives, but it is a paged skb with data starting in its frags[].
Before adding the skb to the frag_list skb_gro_receive() will of course adjust
the skb to throw away the headers. It correctly modifies the page_offset and
size of the frag, but it leaves incorrect information in the skb:
->data_len is not decreased at all.
->len is decreased only by headlen, as if no change were done to the frag.
Later in a receiving process this causes skb_copy_datagram_iovec() to return
-EFAULT and this is seen in userspace as the result of the recv() syscall.
In practice the bug can be reproduced with the sfc driver. By default the
driver uses an adaptive scheme when it switches between using
napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is
reproduced when under rx load with enough successful GRO merging the driver
decides to switch from the former to the latter.
Manual control is also possible, so reproducing this is easy with netcat:
- on machine1 (with sfc): nc -l 12345 > /dev/null
- on machine2: nc machine1 12345 < /dev/zero
- on machine1:
echo 1 > /sys/module/sfc/parameters/rx_alloc_method # use skbs
echo 2 > /sys/module/sfc/parameters/rx_alloc_method # use pages
- See that nc has quit suddenly.
[v2: Modified by Eric Dumazet to avoid advancing skb->data past the end
and to use a temporary variable.]
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Mon, 24 Jan 2011 21:41:11 +0000 (22:41 +0100)]
x86-64: Don't use pointer to out-of-scope variable in dump_trace()
In arch/x86/kernel/dumpstack_64.c::dump_trace() we have this code:
...
if (!stack) {
unsigned long dummy;
stack = &dummy;
if (task && task != current)
stack = (unsigned long *)task->thread.sp;
}
bp = stack_frame(task, regs);
/*
* Print function call entries in all stacks, starting at the
* current stack address. If the stacks consist of nested
* exceptions
*/
tinfo = task_thread_info(task);
for (;;) {
char *id;
unsigned long *estack_end;
estack_end = in_exception_stack(cpu, (unsigned long)stack,
&used, &id);
...
You'll notice that we assign to 'stack' the address of the variable
'dummy' which is only in-scope inside the 'if (!stack)'. So when we later
access stack (at the end of the above, and assuming we did not take the
'if (task && task != current)' branch) we'll be using the address of a
variable that is no longer in scope. I believe this patch is the proper
fix, but I freely admit that I'm not 100% certain.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
LKML-Reference: <alpine.LNX.2.00.
1101242232590.10252@swampdragon.chaosbits.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
David S. Miller [Mon, 24 Jan 2011 21:17:06 +0000 (13:17 -0800)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6
Eric Dumazet [Mon, 24 Jan 2011 21:16:16 +0000 (13:16 -0800)]
net: arp_ioctl() must hold RTNL
Commit
941666c2e3e0 "net: RCU conversion of dev_getbyhwaddr() and
arp_ioctl()" introduced a regression, reported by Jamie Heilman.
"arp -Ds 192.168.2.41 eth0 pub" triggered the ASSERT_RTNL() assert
in pneigh_lookup()
Removing RTNL requirement from arp_ioctl() was a mistake, just revert
that part.
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shaohua Li [Mon, 24 Jan 2011 08:00:01 +0000 (08:00 +0000)]
fix a shutdown regression in intel_idle
Fix a shutdown regression caused by
2a2d31c8dc6f ("intel_idle: open
broadcast clock event"). The clockevent framework can automatically
shutdown broadcast timers for hotremove CPUs. And we get a shutdown
regression when we shutdown broadcast timer for hot remove CPU, so just
delete some code.
Also fix some section mismatch.
Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 24 Jan 2011 19:29:49 +0000 (05:29 +1000)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
omap: DMA: clear interrupt status correctly
OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
arm: omap3: cm-t3517: minor comment fix
arm: omap3: cm-t3517: rtc fix
omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used
omap1: Fix booting for 15xx and 730 with omap1_defconfig
omap1: Fix sched_clock for the MPU timer
OMAP: PRCM: remove duplicated headers
OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4
OMAP: counter_32k: init clocksource as part of machine timer init
Linus Torvalds [Mon, 24 Jan 2011 19:26:47 +0000 (05:26 +1000)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Fix time function double declaration with glibc
perf tools: Fix build by checking if extra warnings are supported
perf tools: Fix build when using gcc 3.4.6
perf tools: Add missing header, fixes build
perf tools: Fix 64 bit integer format strings
perf test: Fix build on older glibcs
perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/
perf test: Use cpu_map->[cpu] when setting affinity
perf symbols: Fix annotation of thumb code
perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat
powerpc, perf: Fix frequency calculation for overflowing counters (FSL version)
perf: Fix perf_event_init_task()/perf_event_free_task() interaction
perf: Fix find_get_context() vs perf_event_exit_task() race
Linus Torvalds [Mon, 24 Jan 2011 19:25:55 +0000 (05:25 +1000)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
RTC: Remove Kconfig symbol for UIE emulation
RTC: Properly handle rtc_read_alarm error propagation and fix bug
RTC: Propagate error handling via rtc_timer_enqueue properly
acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails
rtc: Cleanup removed UIE emulation declaration
hrtimers: Notify hrtimer users of switches to NOHZ mode
Linus Torvalds [Mon, 24 Jan 2011 19:25:13 +0000 (05:25 +1000)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug
Linus Torvalds [Mon, 24 Jan 2011 19:24:12 +0000 (05:24 +1000)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix jump label with RO/NX module protection crash
x86, hotplug: Fix powersavings with offlined cores on AMD
x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow coretemp to handler intr
x86: Use asm-generic/cacheflush.h
x86: Update CPU cache attributes table descriptors
Chris Wilson [Mon, 24 Jan 2011 12:34:00 +0000 (12:34 +0000)]
drm/i915: Prevent uninitialised reads during error state capture
error_bo and pinned_bo could be used uninitialised if there were no
active buffers.
Caught by kmemcheck.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Michael Karcher [Sun, 23 Jan 2011 18:17:17 +0000 (18:17 +0000)]
drm/i915: Use consistent mappings for OpRegion between ACPI and i915
The opregion is a shared memory region between ACPI and the graphics
driver. As the ACPI mapping has been changed to cachable in commit
6d5bbf00d251cc73223a71422d69e069dc2e0b8d, mapping the intel opregion
non-cachable now fails. As no bus-master hardware is involved in the
opregion, cachable map should do no harm.
Tested on a Fujitsu Lifebook P8010.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
[ickle: convert to acpi_os_ioremap for consistency]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sun, 23 Jan 2011 17:22:16 +0000 (17:22 +0000)]
Merge remote branch 'linus/master' into drm-intel-fixes
Merge with Linus to resolve conflicting fixes for the reusing the stale
HEAD value during intel_ring_wait().
Conflicts:
drivers/gpu/drm/i915/intel_ringbuffer.c
Chris Wilson [Sun, 23 Jan 2011 13:03:24 +0000 (13:03 +0000)]
drm/i915: Handle the no-interrupts case for UMS by polling
If the driver calls into the kernel to wait for a breadcrumb to pass,
but hasn't enabled interrupts, fallback to polling the breadcrumb value.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sun, 23 Jan 2011 10:45:14 +0000 (10:45 +0000)]
drm/i915: Disable high-precision vblank timestamping for UMS
We only have sufficient information for accurate (sub-frame) timestamping
when the modesetting is under our control.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sat, 22 Jan 2011 10:07:56 +0000 (10:07 +0000)]
drm/i915: Increase the amount of defense before computing vblank timestamps
Reported-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Fri, 21 Jan 2011 10:54:32 +0000 (10:54 +0000)]
drm/i915,agp/intel: Do not clear stolen entries
We can only utilize the stolen portion of the GTT if we are in sole
charge of the hardware. This is only true if using GEM and KMS,
otherwise VESA continues to access stolen memory.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Ping Cheng [Mon, 24 Jan 2011 17:32:50 +0000 (09:32 -0800)]
Input: wacom - add 2 Bamboo Pen and touch models
Reported-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Andy Whitcroft [Mon, 24 Jan 2011 17:31:38 +0000 (09:31 -0800)]
Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent
Currently sysrq_enabled and __sysrq_enabled are initialised separately
and inconsistently, leading to sysrq being actually enabled by reported
as not enabled in sysfs. The first change to the sysfs configurable
synchronises these two:
static int __read_mostly sysrq_enabled = 1;
static int __sysrq_enabled;
Add a common define to carry the default for these preventing them becoming
out of sync again. Default this to 1 to mirror previous behaviour.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Linus Walleij [Mon, 24 Jan 2011 14:22:13 +0000 (15:22 +0100)]
ARM: 6632/3: mmci: stop using the blockend interrupts
Implement a suggestion from Russell to drop the use of blockend
interrupts altogether and instead rely on the data counter.
Tested with error-free cards on U300, U8500 and RealView PB1176.
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Marc Kleine-Budde [Mon, 10 Jan 2011 19:44:22 +0000 (20:44 +0100)]
can: at91_can: make can_id of mailbox 0 configurable
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
0 may be send under certain conditions (even if disabled or in rx mode).
The workaround in the errata suggests not to use the mailbox and load it
with an unused identifier.
This patch implements the second part of the workaround. A sysfs entry
"mb0_id" is introduced. While the interface is down it can be used to
configure the can_id of mailbox 0. The default value id 0x7ff.
In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U)
to the can_id. Example:
- standard id 0x7ff:
echo 0x7ff > /sys/class/net/can0/mb0_id
- extended id 0x1fffffff:
echo 0x9fffffff > /sys/class/net/can0/mb0_id
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
For the Documentation-part:
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Marc Kleine-Budde [Sun, 9 Jan 2011 21:46:25 +0000 (22:46 +0100)]
can: at91_can: don't use mailbox 0
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
0 may be send under certain conditions (even if disabled or in rx mode).
The workaround in the errata suggests not to use the mailbox and load it
with a unused identifier.
This patch implements the first part of the workaround, it updates
AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation)
so that mailbox 0 stays unused.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Marc Kleine-Budde [Thu, 6 Jan 2011 08:58:42 +0000 (09:58 +0100)]
can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM
This patch cleans up the usage of two macros which specify the mailbox
usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the
number of RX mailboxes. The current driver uses these variables in an
unclean way; assuming that AT91_MB_RX_FIRST is 0;
This patch cleans up the usage of these macros, no longer assuming
AT91_MB_RX_FIRST == 0.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Yong Zhang [Mon, 24 Jan 2011 07:33:52 +0000 (15:33 +0800)]
sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug
Michael Witten and Christian Kujau reported that the autogroup
scheduling feature hurts interactivity on their UP systems.
It turns out that this is an older bug in the group scheduling code,
and the wider appeal provided by the autogroup feature exposed it
more prominently.
When on UP with FAIR_GROUP_SCHED enabled, tune shares
only affect tg->shares, but is not reflected in
tg->se->load. The reason is that update_cfs_shares()
does nothing on UP.
So introduce update_cfs_shares() for UP && FAIR_GROUP_SCHED.
This issue was found when enable autogroup scheduling was enabled,
but it is an older bug that also exists on cgroup.cpu on UP.
Reported-and-Tested-by: Michael Witten <mfwitten@gmail.com>
Reported-and-Tested-by: Christian Kujau <christian@nerdbynature.de>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <
20110124073352.GA24186@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Mon, 24 Jan 2011 09:58:39 +0000 (19:58 +1000)]
Merge branch 'BUG_ON' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus
* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
Remove MAYBE_BUILD_BUG_ON
BUILD_BUG_ON: make it handle more cases
Linus Torvalds [Mon, 24 Jan 2011 09:57:43 +0000 (19:57 +1000)]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: fix missing semicolons in MODULE macro usage
param: add null statement to compiled-in module params
module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
module: show version information for built-in modules in sysfs
Linus Torvalds [Mon, 24 Jan 2011 09:56:47 +0000 (19:56 +1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
selinux: return -ENOMEM when memory allocation fails
tpm: fix panic caused by "tpm: Autodetect itpm devices"
TPM: Long default timeout fix
trusted keys: Fix a memory leak in trusted_update().
keys: add trusted and encrypted maintainers
encrypted-keys: rename encrypted_defined files to encrypted
trusted-keys: rename trusted_defined files to trusted
Rob Landley [Sat, 22 Jan 2011 21:44:05 +0000 (15:44 -0600)]
Make CIFS mount work in a container.
Teach cifs about network namespaces, so mounting uses adresses/routing
visible from the container rather than from init context.
A container is a chroot on steroids that changes more than just the root
filesystem the new processes see. One thing containers can isolate is
"network namespaces", meaning each container can have its own set of
ethernet interfaces, each with its own own IP address and routing to the
outside world. And if you open a socket in _userspace_ from processes
within such a container, this works fine.
But sockets opened from within the kernel still use a single global
networking context in a lot of places, meaning the new socket's address
and routing are correct for PID 1 on the host, but are _not_ what
userspace processes in the container get to use.
So when you mount a network filesystem from within in a container, the
mount code in the CIFS driver uses the host's networking context and not
the container's networking context, so it gets the wrong address, uses
the wrong routing, and may even try to go out an interface that the
container can't even access... Bad stuff.
This patch copies the mount process's network context into the CIFS
structure that stores the rest of the server information for that mount
point, and changes the socket open code to use the saved network context
instead of the global network context. I.E. "when you attempt to use
these addresses, do so relative to THIS set of network interfaces and
routing rules, not the old global context from back before we supported
containers".
The big long HOWTO sets up a test environment on the assumption you've
never used ocntainers before. It basically says:
1) configure and build a new kernel that has container support
2) build a new root filesystem that includes the userspace container
control package (LXC)
3) package/run them under KVM (so you don't have to mess up your host
system in order to play with containers).
4) set up some containers under the KVM system
5) set up contradictory routing in the KVM system and the container so
that the host and the container see different things for the same address
6) try to mount a CIFS share from both contexts so you can both force it
to work and force it to fail.
For a long drawn out test reproduction sequence, see:
http://landley.livejournal.com/47024.html
http://landley.livejournal.com/47205.html
http://landley.livejournal.com/47476.html
Signed-off-by: Rob Landley <rlandley@parallels.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Rusty Russell [Mon, 24 Jan 2011 20:45:10 +0000 (14:45 -0600)]
Remove MAYBE_BUILD_BUG_ON
Now BUILD_BUG_ON() can handle optimizable constants, we don't need
MAYBE_BUILD_BUG_ON any more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 24 Jan 2011 20:45:10 +0000 (14:45 -0600)]
BUILD_BUG_ON: make it handle more cases
BUILD_BUG_ON used to use the optimizer to do code elimination or fail
at link time; it was changed to first the size of a negative array (a
nicer compile time error), then (in
8c87df457cb58fe75b9b893007917cf8095660a0) to a bitfield.
This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON();
as Jan points out in that commit, it didn't work as intended anyway.
bitfields: needs a literal constant at parse time, and can't be put under
"if (__builtin_constant_p(x))" for example.
negative array: can handle anything, but if the compiler can't tell it's
a constant, silently has no effect.
link time: breaks link if the compiler can't determine the value, but the
linker output is not usually as informative as a compiler error.
If we use the negative-array-size method *and* the link time trick,
we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
branches, and maximal ability for the compiler to detect errors at
build time.
We also document it thoroughly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jan Beulich <JBeulich@novell.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Rusty Russell [Mon, 24 Jan 2011 20:32:52 +0000 (14:32 -0600)]
module: fix missing semicolons in MODULE macro usage
You always needed them when you were a module, but the builtin versions
of the macros used to be more lenient.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus Walleij [Wed, 5 Jan 2011 12:27:04 +0000 (13:27 +0100)]
param: add null statement to compiled-in module params
Add an unused struct declaration statement requiring a
terminating semicolon to the compile-in case to provoke an
error if __MODULE_INFO() is used without the terminating
semicolon. Previously MODULE_ALIAS("foo") (no semicolon)
compiled fine if MODULE was not selected.
Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Mon, 24 Jan 2011 20:32:51 +0000 (14:32 -0600)]
module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show'
lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show'
Simplest to just not emit anything: if they've disabled SYSFS they probably
want the smallest kernel possible.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Dmitry Torokhov [Wed, 15 Dec 2010 22:00:19 +0000 (14:00 -0800)]
module: show version information for built-in modules in sysfs
Currently only drivers that are built as modules have their versions
shown in /sys/module/<module_name>/version, but this information might
also be useful for built-in drivers as well. This especially important
for drivers that do not define any parameters - such drivers, if
built-in, are completely invisible from userspace.
This patch changes MODULE_VERSION() macro so that in case when we are
compiling built-in module, version information is stored in a separate
section. Kernel then uses this data to create 'version' sysfs attribute
in the same fashion it creates attributes for module parameters.
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Jesper Juhl [Sat, 22 Jan 2011 20:07:16 +0000 (21:07 +0100)]
CIFS: Remove pointless variable assignment in cifs_dfs_do_automount()
In fs/cifs/cifs_dfs_ref.c::cifs_dfs_do_automount() we have this code:
...
mnt = ERR_PTR(-EINVAL);
if (IS_ERR(tlink)) {
mnt = ERR_CAST(tlink);
goto free_full_path;
}
ses = tlink_tcon(tlink)->ses;
rc = get_dfs_path(xid, ses, full_path + 1, cifs_sb->local_nls,
&num_referrals, &referrals,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
cifs_put_tlink(tlink);
mnt = ERR_PTR(-ENOENT);
...
The assignment of 'mnt = ERR_PTR(-EINVAL);' is completely pointless. If we
take the 'if (IS_ERR(tlink))' branch we'll set 'mnt' again and we'll also
do so if we do not take the branch. There is no way we'll ever use 'mnt'
with the assigned 'ERR_PTR(-EINVAL)' value, so we may as well just remove
the pointless assignment.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Alex Deucher [Thu, 20 Jan 2011 23:35:58 +0000 (23:35 +0000)]
drm/radeon/kms: simplify atom adjust pll setup
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Alex Deucher [Fri, 21 Jan 2011 15:38:22 +0000 (15:38 +0000)]
drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics
Don't reset if the engine isn't busy. This matches the behavior of
previous asics. Reseting a non-hung block can lead to a hang.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33272
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Alex Deucher [Tue, 18 Jan 2011 18:26:11 +0000 (18:26 +0000)]
drm/radeon/kms: make the mac rv630 quirk generic
Seems some other boards do this as well.
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@gmail.com>
Alex Deucher [Mon, 17 Jan 2011 18:08:58 +0000 (18:08 +0000)]
drm/radeon/kms: fix a spelling error in an error message
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Michel Dänzer [Tue, 11 Jan 2011 09:44:54 +0000 (10:44 +0100)]
drm/radeon/kms: Initialize pageflip spinlocks.
I'm amazed but not really surprised this worked on x86...
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Davidlohr Bueso [Fri, 21 Jan 2011 15:28:04 +0000 (12:28 -0300)]
selinux: return -ENOMEM when memory allocation fails
Return -ENOMEM when memory allocation fails in cond_init_bool_indexes,
correctly propagating error code to caller.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: James Morris <jmorris@namei.org>
Olof Johansson [Fri, 7 Jan 2011 03:24:01 +0000 (21:24 -0600)]
tpm: fix panic caused by "tpm: Autodetect itpm devices"
commit
3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 adds a check for
PNP device id to the common tpm_tis_init() function, which in some
cases (force=1) will be called without the device being a member of
a pnp_dev. Oopsing and panics ensue.
Move the test up to before the call to tpm_tis_init(), since it
just modifies a global variable anyway.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Rajiv Andrade [Fri, 12 Nov 2010 21:30:02 +0000 (22:30 +0100)]
TPM: Long default timeout fix
If duration variable value is 0 at this point, it's because
chip->vendor.duration wasn't filled by tpm_get_timeouts() yet.
This patch sets then the lowest timeout just to give enough
time for tpm_get_timeouts() to further succeed.
This fix avoids long boot times in case another entity attempts
to send commands to the TPM when the TPM isn't accessible.
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Jesper Juhl [Sun, 23 Jan 2011 21:40:42 +0000 (22:40 +0100)]
trusted keys: Fix a memory leak in trusted_update().
One failure path in security/keys/trusted.c::trusted_update() does
not free 'new_p' while the others do. This patch makes sure we also free
it in the remaining path (if datablob_parse() returns different from
Opt_update).
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: James Morris <jmorris@namei.org>
Mimi Zohar [Tue, 18 Jan 2011 14:07:13 +0000 (09:07 -0500)]
keys: add trusted and encrypted maintainers
Add myself and David Safford as maintainers for trusted/encrypted keys.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Mimi Zohar [Tue, 18 Jan 2011 14:07:12 +0000 (09:07 -0500)]
encrypted-keys: rename encrypted_defined files to encrypted
Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and
encrypted.h, respectively. Based on request from David Howells.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Mimi Zohar [Tue, 18 Jan 2011 14:07:11 +0000 (09:07 -0500)]
trusted-keys: rename trusted_defined files to trusted
Rename trusted_defined.c and trusted_defined.h files to trusted.c and
trusted.h, respectively. Based on request from David Howells.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Luca Tettamanti [Sat, 22 Jan 2011 15:07:11 +0000 (16:07 +0100)]
hwmon: (asus_atk0110) Override interface detection on Sabertooth X58
ASUS Sabertooth X58 has a bug in ACPI that prevents the reading of MCH
temperature when the "old" ATK0110 interface is used. Add a DMI entry
to override the detection heuristic and force the use of the "new"
interface on this board.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Tested-by: Joris Creyghton <jorisctn@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Henrik Rydberg [Sat, 22 Jan 2011 19:55:39 +0000 (20:55 +0100)]
hwmon: (applesmc) Properly initialize lockdep attributes
The switch to dynamically allocated sysfs attributes left the
internal lockdep members uninitialized, causing a formal bug.
This patch adds sysfs_attr_init() to the node creation function,
remedying the problem.
Reported-and-tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
matthieu castet [Sun, 23 Jan 2011 14:45:52 +0000 (15:45 +0100)]
x86: Fix jump label with RO/NX module protection crash
If we use jump table in module init, there are marked
as removed in __jump_table section after init is done.
But we already applied ro permissions on the module, so
we can't modify a read only section (crash in
remove_jump_label_module_init).
Make the __jump_table section rw.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Siarhei Liakh <sliakh.lkml@gmail.com>
Cc: Xuxian Jiang <jiang@cs.ncsu.edu>
Cc: James Morris <jmorris@namei.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <
4D3C3F20.
7030203@free.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Chris Wilson [Thu, 20 Jan 2011 13:09:12 +0000 (13:09 +0000)]
drm/i915: Recognise non-VGA display devices
Starting with SandyBridge (though possible with earlier hacked BIOSes),
the BIOS may initialise the IGFX as secondary to a discrete GPU. Prior,
it would simply disable the integrated GPU. So we adjust our PCI class
mask to match any DISPLAY_CLASS device.
In such a configuration, the IGFX is not a primary VGA controller and
so should not take part in VGA arbitration, and the error return from
vga_client_register() is expected.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Chris Wilson [Fri, 21 Jan 2011 10:07:18 +0000 (10:07 +0000)]
drm/i915: Fix use of invalid array size for ring->sync_seqno
There are I915_NUM_RINGS-1 inter-ring synchronisation counters, but we
were clearing I915_NUM_RINGS of them. Oops.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Geert Uytterhoeven [Fri, 7 Jan 2011 12:25:29 +0000 (13:25 +0100)]
m68k/amiga: Fix "debug=mem"
`debug=mem' on Amiga has been broken for a while.
early_param() processing is done very/too early, i.e. before
amiga_identify() / amiga_chip_init(), causing amiga_savekmsg_setup() not
to find any Chip RAM.
As we don't plan to free this memory anyway, just steal it from the initial
Chip RAM memory block instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Sun, 16 Jan 2011 19:47:47 +0000 (20:47 +0100)]
m68k/atari: Rename "scc" to "atari_scc"
It's a way too generic name for a global #define and conflicts with a variable
with the same name, causing build errors like:
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’:
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary &
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary &
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary |
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary &
| make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Randy Dunlap [Sun, 23 Jan 2011 04:16:06 +0000 (20:16 -0800)]
fs: fix new dcache.c kernel-doc warnings
Fix new fs/dcache.c kernel-doc warnings:
Warning(fs/dcache.c:184): No description found for parameter 'dentry'
Warning(fs/dcache.c:296): No description found for parameter 'parent'
Warning(fs/dcache.c:1985): No description found for parameter 'dparent'
Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 23 Jan 2011 04:16:12 +0000 (20:16 -0800)]
rapidio: fix new kernel-doc warnings
Fix new rapidio kernel-doc warnings:
Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev'
Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 23 Jan 2011 03:50:03 +0000 (19:50 -0800)]
docbook: fix broken serial to tty/serial movement
Fix move of drivers/serial/ to drivers/tty/, where it broke
one of the docbook files:
docproc: drivers/serial/serial_core.c: No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Renninger [Fri, 21 Jan 2011 14:30:09 +0000 (15:30 +0100)]
perf tools: Fix time function double declaration with glibc
It's enough to include the local "debug.h" file to trigger it.
man time reveals this is already declared in glibc:
time - get time in seconds
-> rename the variable.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: arjan@infradead.org
LPU-Reference: <
1295620209-13859-2-git-send-email-trenn@suse.de>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 22 Jan 2011 21:29:53 +0000 (19:29 -0200)]
perf tools: Fix build by checking if extra warnings are supported
The -Wstack-protector and -Wvolatile-register-var warnings, for
instance, are not supported by gcc 3.4.6.
So fix by doing the same check we already do for -fstack-protector-all.
With this and the other patches in this series, perf builds unmodified
on, for instance, RHEL4.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 22 Jan 2011 21:12:38 +0000 (19:12 -0200)]
perf tools: Fix build when using gcc 3.4.6
[acme@localhost linux]$ make O=~acme/git/build/perf -C tools/perf
make: Entering directory `/home/acme/git/linux/tools/perf'
Makefile:526: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev
Makefile:582: newt not found, disables TUI support. Please install newt-devel or libnewt-dev
CC /home/acme/git/build/perf/builtin-annotate.o
In file included from builtin-annotate.c:23:
util/parse-events.h:26: warning: declaration of 'evsel_list' shadows a global declaration
util/parse-events.h:12: warning: shadowed declaration is here
make: *** [/home/acme/git/build/perf/builtin-annotate.o] Error 1
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@localhost linux]$ gcc --version | head -1
gcc (GCC) 3.4.6
20060404 (Red Hat 3.4.6-11)
[acme@localhost linux]$
Fix it by renaming the parameter to evlist.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 22 Jan 2011 21:07:36 +0000 (19:07 -0200)]
perf tools: Add missing header, fixes build
We need the definiton for __always_inline in bitops.h to fix the build
on distros where it isn't available or compiler.h doesn't get included
indirectly.
One of the fixes needed to build perf on RHEL4 systems, for instance.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 22 Jan 2011 22:37:02 +0000 (20:37 -0200)]
perf tools: Fix 64 bit integer format strings
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <
20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 23 Jan 2011 01:14:20 +0000 (23:14 -0200)]
perf test: Fix build on older glibcs
Where we don't have CPU_ALLOC & friends. As the tools are being used in older
distros where the only allowed change are to replace the kernel, like RHEL4 and
5.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Geert Uytterhoeven [Sat, 8 Jan 2011 20:57:48 +0000 (21:57 +0100)]
m68k: Uninline strchr()
Some versions of gcc replace calls to strstr() with single-character
"needle" string parameters by calls to strchr() behind our back.
If strchr() is defined as an inline function, this causes linking errors
like
ERROR: "strchr" [drivers/target/target_core_mod.ko] undefined!
As m68k is the only architecture that has an inline strchr() and this
inline version is not an optimized asm version, uninline strchr() and use
the standard out-of-line C version in lib/string.c instead.
This also decreases the defconfig/allmodconfig kernel image sizes by a few
hundred bytes.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Ingo Molnar [Sat, 22 Jan 2011 10:08:52 +0000 (11:08 +0100)]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/acme/linux-2.6 into perf/urgent
Ryusuke Konishi [Fri, 21 Jan 2011 07:40:31 +0000 (16:40 +0900)]
nilfs2: fix crash after one superblock became unavailable
Fixes the following kernel oops in nilfs_setup_super() which could
arise if one of two super-blocks is unavailable.
> BUG: unable to handle kernel NULL pointer dereference at (null)
> Pid: 3529, comm: mount.nilfs2 Not tainted 2.6.37 #1 /
> EIP: 0060:[<
c03196bc>] EFLAGS:
00010202 CPU: 3
> EIP is at memcpy+0xc/0x1b
> Call Trace:
> [<
f953720e>] ? nilfs_setup_super+0x6c/0xa5 [nilfs2]
> [<
f95369e9>] ? nilfs_get_root_dentry+0x81/0xcb [nilfs2]
> [<
f9537a08>] ? nilfs_mount+0x4f9/0x62c [nilfs2]
> [<
c02745cf>] ? kstrdup+0x36/0x3f
> [<
f953750f>] ? nilfs_mount+0x0/0x62c [nilfs2]
> [<
c0293940>] ? vfs_kern_mount+0x4d/0x12c
> [<
c02a5100>] ? get_fs_type+0x76/0x8f
> [<
c0293a68>] ? do_kern_mount+0x33/0xbf
> [<
c02a784a>] ? do_mount+0x2ed/0x714
> [<
c02a6171>] ? copy_mount_options+0x28/0xfc
> [<
c02a7ce3>] ? sys_mount+0x72/0xaf
> [<
c0473085>] ? syscall_call+0x7/0xb
Reported-by: Wakko Warner <wakko@animx.eu.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Wakko Warner <wakko@animx.eu.org>
Cc: stable <stable@kernel.org> [2.6.37, 2.6.36]
LKML-Reference: <
20110121024918.GA29598@animx.eu.org>
Kurt Van Dijck [Tue, 11 Jan 2011 04:34:28 +0000 (04:34 +0000)]
can: add driver for Softing card
This patch adds the driver that creates a platform:softing device
from a pcmcia_device
Note: the Kconfig indicates a dependency on the softing.ko driver,
but this is purely to make configuration intuitive. This driver will
work independent, but no CAN network devices appear until softing.ko is
loaded too.
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Van Dijck [Tue, 11 Jan 2011 04:32:31 +0000 (04:32 +0000)]
can: add driver for Softing card
This patch adds a driver for the platform:softing device.
This will create (up to) 2 CAN network devices from 1
platform:softing device
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 22 Jan 2011 03:01:34 +0000 (19:01 -0800)]
Linux 2.6.38-rc2
Borislav Petkov [Thu, 20 Jan 2011 14:42:52 +0000 (15:42 +0100)]
x86, hotplug: Fix powersavings with offlined cores on AMD
ea53069231f9317062910d6e772cca4ce93de8c8 made a CPU use monitor/mwait
when offline. This is not the optimal choice for AMD wrt to powersavings
and we'd prefer our cores to halt (i.e. enter C1) instead. For this, the
same selection whether to use monitor/mwait has to be used as when we
select the idle routine for the machine.
With this patch, offlining cores 1-5 on a X6 machine allows core0 to
boost again.
[ hpa: putting this in urgent since it is a (power) regression fix ]
Reported-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: stable@kernel.org # 37.x
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.hl>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <
1295534572-10730-1-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Daniel Walker [Tue, 18 Jan 2011 18:14:33 +0000 (10:14 -0800)]
drivers: mmc: msm: remove clock disable in probe
The probe function adds the MMC host which can start accepting request
immediately. There is an assumption here that no requests happen
immediatly, but it's not always the case. This assumption can causes
a BUG() when the clocks are disabled. The fix is to just remove the
clock disable in the probe function.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Daniel Walker [Tue, 18 Jan 2011 23:03:25 +0000 (15:03 -0800)]
mmc: msm: fix dma usage not to use internal APIs
Remove parts of this driver which use internal API calls. This
replaces the calls as suggested by Russell King.
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Linus Torvalds [Sat, 22 Jan 2011 00:50:31 +0000 (16:50 -0800)]
Merge branch 'media_fixes' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
[media] staging/lirc: fix mem leaks and ptr err usage
[media] hdpvr: reduce latency of i2c read/write w/recycled buffer
[media] hdpvr: enable IR part
[media] rc/mceusb: timeout should be in ns, not us
[media] v4l2-device: fix 'use-after-freed' oops
[media] v4l2-dev: don't memset video_device.dev
[media] zoran: use video_device_alloc instead of kmalloc
[media] w9966: zero device state after a detach
[media] v4l: Fix a use-before-set in the control framework
[media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
[media] DocBook/v4l: update V4L2 revision and update copyright years
[media] DocBook/v4l: fix validation error in dev-rds.xml
[media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
[media] v4l2-ctrls: fix missing 'read-only' check
[media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
[media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
[media] lirc_zilog: Update TODO.lirc_zilog
[media] lirc_zilog: Add Andy Walls to copyright notice and authors list
[media] lirc_zilog: Remove useless struct i2c_driver.command function
[media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
...
Vasiliy Kulikov [Sat, 22 Jan 2011 00:24:23 +0000 (16:24 -0800)]
atm: idt77105: fix fetch_stats() result
copy_to_user() used PRIV(dev)->stats instead of local stats variable.
Zero stats were returned to user in case of (zero != 0), also memcpy()
was pointless.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 20 Jan 2011 16:38:33 +0000 (16:38 +0000)]
KEYS: Fix up comments in key management code
Fix up comments in the key management code. No functional changes.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 20 Jan 2011 16:38:27 +0000 (16:38 +0000)]
KEYS: Do some style cleanup in the key management code.
Do a bit of a style clean up in the key management code. No functional
changes.
Done using:
perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c
To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 21 Jan 2011 21:44:07 +0000 (13:44 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix up CIFSSMBEcho for unaligned access
cifs: fix unaligned accesses in cifsConvertToUCS
cifs: clean up unaligned accesses in cifs_unicode.c
cifs: fix unaligned access in check2ndT2 and coalesce_t2
cifs: clean up unaligned accesses in validate_t2
cifs: use get/put_unaligned functions to access ByteCount
cifs: move time field in cifsInodeInfo
cifs: TCP_Server_Info diet
CIFS: Implement cifs_strict_readv (try #4)
CIFS: Implement cifs_file_strict_mmap (try #2)
CIFS: Implement cifs_strict_fsync
CIFS: Make cifsFileInfo_put work with strict cache mode
Linus Torvalds [Fri, 21 Jan 2011 21:43:21 +0000 (13:43 -0800)]
Merge branch 'fixes-2.6.38' of git://git./linux/kernel/git/tj/percpu
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
x86,percpu: Move out of place 64 bit ops into X86_64 section
Linus Torvalds [Fri, 21 Jan 2011 21:38:57 +0000 (13:38 -0800)]
Merge branch 'fixes-2.6.38' of git://git./linux/kernel/git/tj/wq
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop
workqueue: relax lockdep annotation on flush_work()
Linus Torvalds [Fri, 21 Jan 2011 21:38:26 +0000 (13:38 -0800)]
Merge branch 'irq-cleanup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
um: Use generic irq Kconfig
tile: Use generic irq Kconfig
sparc: Use generic irq Kconfig
score: Use generic irq Kconfig
powerpc: Use generic irq Kconfig
parisc: Use generic irq Kconfig
mn10300: Use generic irq Kconfig
microblaze: Use generic irq Kconfig
m68knommu: Use generic irq Kconfig
ia64: Use generic irq Kconfig
frv: Use generic irq Kconfig
blackfin: Use generic irq Kconfig
alpha: Use generic irq Kconfig
genirq: Remove __do_IRQ
m32r: Convert to generic irq Kconfig
m32r: Convert usrv platform irq handling
m32r: Convert opsput_lcdpld irq chip
m32r: Convert opsput lanpld irq chip
m32r: Convert opsput pld irq chip
m32r: Convert opsput irq chip
...
Linus Torvalds [Fri, 21 Jan 2011 21:35:10 +0000 (13:35 -0800)]
Merge branch 'stable/bug-fixes-rc1' of git://git./linux/kernel/git/konrad/xen
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: p2m: correctly initialize partial p2m leaf
xen: fix non-ANSI function warning in irq.c
Linus Torvalds [Fri, 21 Jan 2011 21:34:39 +0000 (13:34 -0800)]
Merge branches 'fixes' and 'fwnet' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: core: fix unstable I/O with Canon camcorder
* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: net: is not experimental anymore
firewire: net: invalidate ARP entries of removed nodes
Linus Torvalds [Fri, 21 Jan 2011 21:24:33 +0000 (13:24 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662
ALSA: HDA: Add SKU ignore for another Thinkpad Edge 14
ALSA: hda - Fix "unused variable" compile warning
ALSA: hda - Add quirk for HP Z-series workstation
Revert "ALSA: HDA: Create mixers on ALC887"
ASoC: PXA: Fix codec address on Zipit Z2
ASoC: PXA: Fix jack detection on Zipit Z2
ASoC: Blackfin: fix DAI/SPORT config dependency issues
ASoC: Blackfin TDM: use external frame syncs
ASoC: Blackfin AC97: fix build error after multi-component update
ASoC: Blackfin TDM: fix missed snd_soc_dai_get_drvdata update
ASoC: documentation updates
ALSA: ice1712 delta - initialize SPI clock
Linus Torvalds [Fri, 21 Jan 2011 21:24:16 +0000 (13:24 -0800)]
Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
powerpc/83xx: fix build failures on dt compatible list.
Linus Torvalds [Fri, 21 Jan 2011 21:23:52 +0000 (13:23 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
powerpc/mpic: Fix mask/unmask timeout message
powerpc/pseries: Add BNX2=m to defconfig
powerpc: Enable 64kB pages and 1024 threads in pseries config
powerpc: Disable mcount tracers in pseries defconfig
powerpc/boot/dts: Install dts from the right directory
powerpc: machine_check_generic is wrong on 64bit
powerpc: Check RTAS extended log flag before checking length
powerpc: Fix corruption when grabbing FWNMI data
powerpc: Rework pseries machine check handler
powerpc: Don't silently handle machine checks from userspace
powerpc: Remove duplicate debugger hook in machine_check_exception
powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check
powerpc: Don't force MSR_RI in machine_check_exception
powerpc: Print 32 bits of DSISR in show_regs
powerpc/kdump: Disable ftrace during kexec
powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler
powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare
powerpc/kexec: Don't initialise kexec hooks to default handlers
powerpc/kdump: Remove ppc_md.machine_crash_shutdown
powerpc/kexec: Remove ppc_md.machine_kexec
...
Oleg Nesterov [Fri, 21 Jan 2011 17:45:47 +0000 (18:45 +0100)]
perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/
In theory, almost every user of task->child->perf_event_ctxp[]
is wrong. find_get_context() can install the new context at any
moment, we need read_barrier_depends().
dbe08d82ce3967ccdf459f7951d02589cf967300 "perf: Fix
find_get_context() vs perf_event_exit_task() race" added
rcu_dereference() into perf_event_exit_task_context() to make
the precedent, but this makes __rcu_dereference_check() unhappy.
Use rcu_dereference_raw() to shut up the warning.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: stern@rowland.harvard.edu
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: roland@redhat.com
Cc: prasad@linux.vnet.ibm.com
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <
20110121174547.GA8796@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jesper Juhl [Fri, 21 Jan 2011 19:40:54 +0000 (13:40 -0600)]
rtlwifi: Fix possible NULL dereference
In drivers/net/wireless/rtlwifi/pci.c::_rtl_pci_rx_interrupt() we call
dev_alloc_skb(), which may fail and return NULL, but we do not check the
returned value against NULL before dereferencing the returned pointer.
This may lead to a NULL pointer dereference which means we'll crash - not
good.
In a separate call to dev_alloc_skb(), the debug level is changed so that
the failure message will always be logged.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Fri, 21 Jan 2011 17:52:38 +0000 (18:52 +0100)]
ath9k: add missing ps wakeup/restore calls
There are several places where ath_reset() was called without proper
calls to ath9k_ps_wakeup/ath9k_ps_restore. To fix this, add those calls
directly to ath_reset and drop them from callers where it makes sense.
Also add them to the config callback around ath_update_txpow to fix a
crash that happens when the tx power changed before any vif is brought up.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>