firefly-linux-kernel-4.4.55.git
11 years agoCRIS: fix I/O macros
Corey Minyard [Tue, 18 Dec 2012 22:21:19 +0000 (14:21 -0800)]
CRIS: fix I/O macros

commit c24bf9b4cc6a0f330ea355d73bfdf1dae7e63a05 upstream.

The inb/outb macros for CRIS are broken from a number of points of view,
missing () around parameters and they have an unprotected if statement
in them.  This was breaking the compile of IPMI on CRIS and thus I was
being annoyed by build regressions, so I fixed them.

Plus I don't think they would have worked at all, since the data values
were missing "&" and the outsl had a "3" instead of a "4" for the size.
From what I can tell, this stuff is not used at all, so this can't be
any more broken than it was before, anyway.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoBluetooth: cancel power_on work when unregistering the device
Gustavo Padovan [Wed, 21 Nov 2012 02:50:21 +0000 (00:50 -0200)]
Bluetooth: cancel power_on work when unregistering the device

commit b9b5ef188e5a2222cfc16ef62a4703080750b451 upstream.

We need to cancel the hci_power_on work in order to avoid it run when we
try to free the hdev.

[ 1434.201149] ------------[ cut here ]------------
[ 1434.204998] WARNING: at lib/debugobjects.c:261 debug_print_object+0x8e/0xb0()
[ 1434.208324] ODEBUG: free active (active state 0) object type: work_struct hint: hci
_power_on+0x0/0x90
[ 1434.210386] Pid: 8564, comm: trinity-child25 Tainted: G        W    3.7.0-rc5-next-
20121112-sasha-00018-g2f4ce0e #127
[ 1434.210760] Call Trace:
[ 1434.210760]  [<ffffffff819f3d6e>] ? debug_print_object+0x8e/0xb0
[ 1434.210760]  [<ffffffff8110b887>] warn_slowpath_common+0x87/0xb0
[ 1434.210760]  [<ffffffff8110b911>] warn_slowpath_fmt+0x41/0x50
[ 1434.210760]  [<ffffffff819f3d6e>] debug_print_object+0x8e/0xb0
[ 1434.210760]  [<ffffffff8376b750>] ? hci_dev_open+0x310/0x310
[ 1434.210760]  [<ffffffff83bf94e5>] ? _raw_spin_unlock_irqrestore+0x55/0xa0
[ 1434.210760]  [<ffffffff819f3ee5>] __debug_check_no_obj_freed+0xa5/0x230
[ 1434.210760]  [<ffffffff83785db0>] ? bt_host_release+0x10/0x20
[ 1434.210760]  [<ffffffff819f4d15>] debug_check_no_obj_freed+0x15/0x20
[ 1434.210760]  [<ffffffff8125eee7>] kfree+0x227/0x330
[ 1434.210760]  [<ffffffff83785db0>] bt_host_release+0x10/0x20
[ 1434.210760]  [<ffffffff81e539e5>] device_release+0x65/0xc0
[ 1434.210760]  [<ffffffff819d3975>] kobject_cleanup+0x145/0x190
[ 1434.210760]  [<ffffffff819d39cd>] kobject_release+0xd/0x10
[ 1434.210760]  [<ffffffff819d33cc>] kobject_put+0x4c/0x60
[ 1434.210760]  [<ffffffff81e548b2>] put_device+0x12/0x20
[ 1434.210760]  [<ffffffff8376a334>] hci_free_dev+0x24/0x30
[ 1434.210760]  [<ffffffff82fd8fe1>] vhci_release+0x31/0x60
[ 1434.210760]  [<ffffffff8127be12>] __fput+0x122/0x250
[ 1434.210760]  [<ffffffff811cab0d>] ? rcu_user_exit+0x9d/0xd0
[ 1434.210760]  [<ffffffff8127bf49>] ____fput+0x9/0x10
[ 1434.210760]  [<ffffffff81133402>] task_work_run+0xb2/0xf0
[ 1434.210760]  [<ffffffff8106cfa7>] do_notify_resume+0x77/0xa0
[ 1434.210760]  [<ffffffff83bfb0ea>] int_signal+0x12/0x17
[ 1434.210760] ---[ end trace a6d57fefbc8a8cc7 ]---

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoBluetooth: ath3k: Add support for VAIO VPCEH [0489:e027]
Marcos Chaparro [Tue, 6 Nov 2012 19:19:11 +0000 (16:19 -0300)]
Bluetooth: ath3k: Add support for VAIO VPCEH [0489:e027]

commit acd9454433e28c1a365d8b069813c35c1c3a8ac3 upstream.

Added Atheros AR3011 internal bluetooth device found in Sony VAIO VPCEH to the
devices list.
Before this, the bluetooth module was identified as an Foxconn / Hai bluetooth
device [0489:e027], now it claims to be an AtherosAR3011 Bluetooth
[0cf3:3005].

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e027 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Marcos Chaparro <marcos@mrkindustries.com.ar>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoPCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz
Andy Lutomirski [Sat, 1 Dec 2012 20:37:20 +0000 (12:37 -0800)]
PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz

commit 812089e01b9f65f90fc8fc670d8cce72a0e01fbb upstream.

Otherwise it fails like this on cards like the Transcend 16GB SDHC card:

    mmc0: new SDHC card at address b368
    mmcblk0: mmc0:b368 SDC   15.0 GiB
    mmcblk0: error -110 sending status command, retrying
    mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0

Tested on my Lenovo x200 laptop.

[bhelgaas: changelog]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Chris Ball <cjb@laptop.org>
CC: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agosolos-pci: fix double-free of TX skb in DMA mode
David Woodhouse [Tue, 11 Dec 2012 14:57:14 +0000 (14:57 +0000)]
solos-pci: fix double-free of TX skb in DMA mode

commit cae49ede00ec3d0cda290b03fee55b72b49efc11 upstream.

We weren't clearing card->tx_skb[port] when processing the TX done interrupt.
If there wasn't another skb ready to transmit immediately, this led to a
double-free because we'd free it *again* next time we did have a packet to
send.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoARM: missing ->mmap_sem around find_vma() in swp_emulate.c
Al Viro [Sun, 16 Dec 2012 00:25:57 +0000 (00:25 +0000)]
ARM: missing ->mmap_sem around find_vma() in swp_emulate.c

commit 7bf9b7bef881aac820bf1f2e9951a17b09bd7e04 upstream.

find_vma() is *not* safe when somebody else is removing vmas.  Not just
the return value might get bogus just as you are getting it (this instance
doesn't try to dereference the resulting vma), the search itself can get
buggered in rather spectacular ways.  IOW, ->mmap_sem really, really is
not optional here.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoARM: mm: use pteval_t to represent page protection values
Will Deacon [Tue, 18 Sep 2012 18:18:35 +0000 (19:18 +0100)]
ARM: mm: use pteval_t to represent page protection values

commit 864aa04cd02979c2c755cb28b5f4fe56039171c0 upstream.

When updating the page protection map after calculating the user_pgprot
value, the base protection map is temporarily stored in an unsigned long
type, causing truncation of the protection bits when LPAE is enabled.
This effectively means that calls to mprotect() will corrupt the upper
page attributes, clearing the XN bit unconditionally.

This patch uses pteval_t to store the intermediate protection values,
preserving the upper bits for 64-bit descriptors.

Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation
Eric Dumazet [Sun, 21 Oct 2012 19:57:11 +0000 (19:57 +0000)]
tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation

[ Upstream commit 354e4aa391ed50a4d827ff6fc11e0667d0859b25 ]

RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation]

  All TCP stacks MAY implement the following mitigation.  TCP stacks
  that implement this mitigation MUST add an additional input check to
  any incoming segment.  The ACK value is considered acceptable only if
  it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
  SND.NXT).  All incoming segments whose ACK value doesn't satisfy the
  above condition MUST be discarded and an ACK sent back.

Move tcp_send_challenge_ack() before tcp_ack() to avoid a forward
declaration.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming()
Eric Dumazet [Tue, 13 Nov 2012 05:37:18 +0000 (05:37 +0000)]
tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming()

[ Upstream commit bd090dfc634ddd711a5fbd0cadc6e0ab4977bcaf ]

We added support for RFC 5961 in latest kernels but TCP fails
to perform exhaustive check of ACK sequence.

We can update our view of peer tsval from a frame that is
later discarded by tcp_ack()

This makes timestamps enabled sessions vulnerable to injection of
a high tsval : peers start an ACK storm, since the victim
sends a dupack each time it receives an ACK from the other peer.

As tcp_validate_incoming() is called before tcp_ack(), we should
not peform tcp_replace_ts_recent() from it, and let callers do it
at the right time.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Nandita Dukkipati <nanditad@google.com>
Cc: H.K. Jerry Chu <hkchu@google.com>
Cc: Romain Francoise <romain@orebokech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotcp: refine SYN handling in tcp_validate_incoming
Eric Dumazet [Tue, 17 Jul 2012 12:29:30 +0000 (12:29 +0000)]
tcp: refine SYN handling in tcp_validate_incoming

[ Upstream commit e371589917011efe6ff8c7dfb4e9e81934ac5855 ]

Followup of commit 0c24604b68fc (tcp: implement RFC 5961 4.2)

As reported by Vijay Subramanian, we should send a challenge ACK
instead of a dup ack if a SYN flag is set on a packet received out of
window.

This permits the ratelimiting to work as intended, and to increase
correct SNMP counters.

Suggested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Cc: Kiran Kumar Kella <kkiran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotcp: implement RFC 5961 4.2
Eric Dumazet [Tue, 17 Jul 2012 01:41:30 +0000 (01:41 +0000)]
tcp: implement RFC 5961 4.2

[ Upstream commit 0c24604b68fc7810d429d6c3657b6f148270e528 ]

Implement the RFC 5691 mitigation against Blind
Reset attack using SYN bit.

Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop
incoming packet, instead of resetting the session.

Add a new SNMP counter to count number of challenge acks sent
in response to SYN packets.
(netstat -s | grep TCPSYNChallenge)

Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session
because of a SYN flag.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kiran Kumar Kella <kkiran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotcp: implement RFC 5961 3.2
Eric Dumazet [Tue, 17 Jul 2012 08:13:05 +0000 (10:13 +0200)]
tcp: implement RFC 5961 3.2

[ Upstream commit 282f23c6ee343126156dd41218b22ece96d747e3 ]

Implement the RFC 5691 mitigation against Blind
Reset attack using RST bit.

Idea is to validate incoming RST sequence,
to match RCV.NXT value, instead of previouly accepted
window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND)

If sequence is in window but not an exact match, send
a "challenge ACK", so that the other part can resend an
RST with the appropriate sequence.

Add a new sysctl, tcp_challenge_ack_limit, to limit
number of challenge ACK sent per second.

Add a new SNMP counter to count number of challenge acks sent.
(netstat -s | grep TCPChallengeACK)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kiran Kumar Kella <kkiran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agonet: sched: integer overflow fix
Stefan Hasko [Fri, 21 Dec 2012 15:04:59 +0000 (15:04 +0000)]
net: sched: integer overflow fix

[ Upstream commit d2fe85da52e89b8012ffad010ef352a964725d5f ]

Fixed integer overflow in function htb_dequeue

Signed-off-by: Stefan Hasko <hasko.stevo@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agosparc: huge_ptep_set_* functions need to call set_huge_pte_at()
Dave Kleikamp [Mon, 17 Dec 2012 17:52:47 +0000 (11:52 -0600)]
sparc: huge_ptep_set_* functions need to call set_huge_pte_at()

[ Upstream commit 6cb9c3697585c47977c42c5cc1b9fc49247ac530 ]

Modifying the huge pte's requires that all the underlying pte's be
modified.

Version 2: added missing flush_tlb_page()

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoftrace: Do not function trace inlined functions
Steven Rostedt [Mon, 12 Dec 2011 20:22:41 +0000 (15:22 -0500)]
ftrace: Do not function trace inlined functions

commit 45959ee7aa645815a5ce303a0ea1e48a21e67c6a upstream.

When gcc inlines a function, it does not mark it with the mcount
prologue, which in turn means that inlined functions are not traced
by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then
gcc is allowed not to inline a function that is marked inline.

Depending on the options and the compiler, a function may or may
not be traced by the function tracer, depending on whether gcc
decides to inline a function or not. This has caused several
problems in the pass becaues gcc is not always consistent with
what it decides to inline between different gcc versions.

Some places should not be traced (like paravirt native_* functions)
and these are mostly marked as inline. When gcc decides not to
inline the function, and if that function should not be traced, then
the ftrace function tracer will suddenly break when it use to work
fine. This becomes even harder to debug when different versions of
gcc will not inline that function, making the same kernel and config
work for some gcc versions and not work for others.

By making all functions marked inline to not be traced will remove
the ambiguity that gcc adds when it comes to tracing functions marked
inline. All gcc versions will be consistent with what functions are
traced and having volatile working code will be removed.

Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs
to have notrace added, as the attribute __always_inline will force
the function to be inlined and then not traced.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agox86, amd: Disable way access filter on Piledriver CPUs
Andre Przywara [Wed, 31 Oct 2012 16:20:50 +0000 (17:20 +0100)]
x86, amd: Disable way access filter on Piledriver CPUs

commit 2bbf0a1427c377350f001fbc6260995334739ad7 upstream.

The Way Access Filter in recent AMD CPUs may hurt the performance of
some workloads, caused by aliasing issues in the L1 cache.
This patch disables it on the affected CPUs.

The issue is similar to that one of last year:
http://lkml.indiana.edu/hypermail/linux/kernel/1107.3/00041.html
This new patch does not replace the old one, we just need another
quirk for newer CPUs.

The performance penalty without the patch depends on the
circumstances, but is a bit less than the last year's 3%.

The workloads affected would be those that access code from the same
physical page under different virtual addresses, so different
processes using the same libraries with ASLR or multiple instances of
PIE-binaries. The code needs to be accessed simultaneously from both
cores of the same compute unit.

More details can be found here:
http://developer.amd.com/Assets/SharedL1InstructionCacheonAMD15hCPU.pdf

CPUs affected are anything with the core known as Piledriver.
That includes the new parts of the AMD A-Series (aka Trinity) and the
just released new CPUs of the FX-Series (aka Vishera).
The model numbering is a bit odd here: FX CPUs have model 2,
A-Series has model 10h, with possible extensions to 1Fh. Hence the
range of model ids.

Signed-off-by: Andre Przywara <osp@andrep.de>
Link: http://lkml.kernel.org/r/1351700450-9277-1-git-send-email-osp@andrep.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agocgroup: remove incorrect dget/dput() pair in cgroup_create_dir()
Tejun Heo [Mon, 19 Nov 2012 16:13:35 +0000 (08:13 -0800)]
cgroup: remove incorrect dget/dput() pair in cgroup_create_dir()

commit 175431635ec09b1d1bba04979b006b99e8305a83 upstream.

cgroup_create_dir() does weird dancing with dentry refcnt.  On
success, it gets and then puts it achieving nothing.  On failure, it
puts but there isn't no matching get anywhere leading to the following
oops if cgroup_create_file() fails for whatever reason.

  ------------[ cut here ]------------
  kernel BUG at /work/os/work/fs/dcache.c:552!
  invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in:
  CPU 2
  Pid: 697, comm: mkdir Not tainted 3.7.0-rc4-work+ #3 Bochs Bochs
  RIP: 0010:[<ffffffff811d9c0c>]  [<ffffffff811d9c0c>] dput+0x1dc/0x1e0
  RSP: 0018:ffff88001a3ebef8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88000e5b1ef8 RCX: 0000000000000403
  RDX: 0000000000000303 RSI: 2000000000000000 RDI: ffff88000e5b1f58
  RBP: ffff88001a3ebf18 R08: ffffffff82c76960 R09: 0000000000000001
  R10: ffff880015022080 R11: ffd9bed70f48a041 R12: 00000000ffffffea
  R13: 0000000000000001 R14: ffff88000e5b1f58 R15: 00007fff57656d60
  FS:  00007ff05fcb3800(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000004046f0 CR3: 000000001315f000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process mkdir (pid: 697, threadinfo ffff88001a3ea000, task ffff880015022080)
  Stack:
   ffff88001a3ebf48 00000000ffffffea 0000000000000001 0000000000000000
   ffff88001a3ebf38 ffffffff811cc889 0000000000000001 ffff88000e5b1ef8
   ffff88001a3ebf68 ffffffff811d1fc9 ffff8800198d7f18 ffff880019106ef8
  Call Trace:
   [<ffffffff811cc889>] done_path_create+0x19/0x50
   [<ffffffff811d1fc9>] sys_mkdirat+0x59/0x80
   [<ffffffff811d2009>] sys_mkdir+0x19/0x20
   [<ffffffff81be1e02>] system_call_fastpath+0x16/0x1b
  Code: 00 48 8d 90 18 01 00 00 48 89 93 c0 00 00 00 4c 89 a0 18 01 00 00 48 8b 83 a0 00 00 00 83 80 28 01 00 00 01 e8 e6 6f a0 00 eb 92 <0f> 0b 66 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 fe 41
  RIP  [<ffffffff811d9c0c>] dput+0x1dc/0x1e0
   RSP <ffff88001a3ebef8>
  ---[ end trace 1277bcfd9561ddb0 ]---

Fix it by dropping the unnecessary dget/dput() pair.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoxhci: Add Lynx Point LP to list of Intel switchable hosts
Russell Webb [Fri, 9 Nov 2012 21:58:49 +0000 (13:58 -0800)]
xhci: Add Lynx Point LP to list of Intel switchable hosts

commit bb1e5dd7113d2fd178d3af9aca8f480ae0468edf upstream.

Like Lynx Point, Lynx Point LP is also switchable.  See
1c12443ab8eba71a658fae4572147e56d1f84f66 for more details.

This patch should be backported to stable kernels as old as 3.0,
that contain commit 69e848c2090aebba5698a1620604c7dccb448684
"Intel xhci: Support EHCI/xHCI port switching."

Signed-off-by: Russell Webb <russell.webb@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agogenirq: Always force thread affinity
Thomas Gleixner [Sat, 3 Nov 2012 10:52:09 +0000 (11:52 +0100)]
genirq: Always force thread affinity

commit 04aa530ec04f61875b99c12721162e2964e3318c upstream.

Sankara reported that the genirq core code fails to adjust the
affinity of an interrupt thread in several cases:

 1) On request/setup_irq() the call to setup_affinity() happens before
    the new action is registered, so the new thread is not notified.

 2) For secondary shared interrupts nothing notifies the new thread to
    change its affinity.

 3) Interrupts which have the IRQ_NO_BALANCE flag set are not moving
    the thread either.

Fix this by setting the thread affinity flag right on thread creation
time. This ensures that under all circumstances the thread moves to
the right place. Requires a check in irq_thread_check_affinity for an
existing affinity mask (CONFIG_CPU_MASK_OFFSTACK=y)

Reported-and-tested-by: Sankara Muthukrishnan <sankara.m@gmail.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1209041738200.2754@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoInput: walkera0701 - fix crash on startup
Peter Popovec [Sat, 15 Dec 2012 06:57:25 +0000 (22:57 -0800)]
Input: walkera0701 - fix crash on startup

commit a455e2985f57e2a71566bb8850094af38b2c932d upstream.

The driver's timer must be set up before enabling IRQ handler, otherwise
bad things may happen.

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Popovec <popovec@fei.tuke.sk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agonfs: fix null checking in nfs_get_option_str()
Xi Wang [Fri, 4 Jan 2013 08:22:57 +0000 (03:22 -0500)]
nfs: fix null checking in nfs_get_option_str()

commit e25fbe380c4e3c09afa98bcdcd9d3921443adab8 upstream.

The following null pointer check is broken.

*option = match_strdup(args);
return !option;

The pointer `option' must be non-null, and thus `!option' is always false.
Use `!*option' instead.

The bug was introduced in commit c5cb09b6f8 ("Cleanup: Factor out some
cut-and-paste code.").

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agonfsd4: fix oops on unusual readlike compound
J. Bruce Fields [Tue, 4 Dec 2012 23:25:10 +0000 (18:25 -0500)]
nfsd4: fix oops on unusual readlike compound

commit d5f50b0c290431c65377c4afa1c764e2c3fe5305 upstream.

If the argument and reply together exceed the maximum payload size, then
a reply with a read-like operation can overlow the rq_pages array.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoNFS: Fix calls to drop_nlink()
Trond Myklebust [Fri, 14 Dec 2012 21:38:46 +0000 (16:38 -0500)]
NFS: Fix calls to drop_nlink()

commit 1f018458b30b0d5c535c94e577aa0acbb92e1395 upstream.

It is almost always wrong for NFS to call drop_nlink() after removing a
file. What we really want is to mark the inode's attributes for
revalidation, and we want to ensure that the VFS drops it if we're
reasonably sure that this is the final unlink().
Do the former using the usual cache validity flags, and the latter
by testing if inode->i_nlink == 1, and clearing it in that case.

This also fixes the following warning reported by Neil Brown and
Jeff Layton (among others).

[634155.004438] WARNING:
at /home/abuild/rpmbuild/BUILD/kernel-desktop-3.5.0/lin [634155.004442]
Hardware name: Latitude E6510 [634155.004577]  crc_itu_t crc32c_intel
snd_hwdep snd_pcm snd_timer snd soundcor [634155.004609] Pid: 13402, comm:
bash Tainted: G        W    3.5.0-36-desktop # [634155.004611] Call Trace:
[634155.004630]  [<ffffffff8100444a>] dump_trace+0xaa/0x2b0
[634155.004641]  [<ffffffff815a23dc>] dump_stack+0x69/0x6f
[634155.004653]  [<ffffffff81041a0b>] warn_slowpath_common+0x7b/0xc0
[634155.004662]  [<ffffffff811832e4>] drop_nlink+0x34/0x40
[634155.004687]  [<ffffffffa05bb6c3>] nfs_dentry_iput+0x33/0x70 [nfs]
[634155.004714]  [<ffffffff8118049e>] dput+0x12e/0x230
[634155.004726]  [<ffffffff8116b230>] __fput+0x170/0x230
[634155.004735]  [<ffffffff81167c0f>] filp_close+0x5f/0x90
[634155.004743]  [<ffffffff81167cd7>] sys_close+0x97/0x100
[634155.004754]  [<ffffffff815c3b39>] system_call_fastpath+0x16/0x1b
[634155.004767]  [<00007f2a73a0d110>] 0x7f2a73a0d10f

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoNFS: avoid NULL dereference in nfs_destroy_server
NeilBrown [Thu, 13 Dec 2012 04:14:36 +0000 (15:14 +1100)]
NFS: avoid NULL dereference in nfs_destroy_server

commit f259613a1e4b44a0cf85a5dafd931be96ee7c9e5 upstream.

In rare circumstances, nfs_clone_server() of a v2 or v3 server can get
an error between setting server->destory (to nfs_destroy_server), and
calling nfs_start_lockd (which will set server->nlm_host).

If this happens, nfs_clone_server will call nfs_free_server which
will call nfs_destroy_server and thence nlmclnt_done(NULL).  This
causes the NULL to be dereferenced.

So add a guard to only call nlmclnt_done() if ->nlm_host is not NULL.

The other guards there are irrelevant as nlm_host can only be non-NULL
if one of these flags are set - so remove those tests.  (Thanks to Trond
for this suggestion).

This is suitable for any stable kernel since 2.6.25.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoACPI / scan: Do not use dummy HID for system bus ACPI nodes
Rafael J. Wysocki [Fri, 4 Jan 2013 22:00:54 +0000 (23:00 +0100)]
ACPI / scan: Do not use dummy HID for system bus ACPI nodes

commit 4f5f64cf0cc916220aaa055992e31195470cfe37 upstream.

At one point acpi_device_set_id() checks if acpi_device_hid(device)
returns NULL, but that never happens, so system bus devices with an
empty list of PNP IDs are given the dummy HID ("device") instead of
the "system bus HID" ("LNXSYBUS").  Fix the code to use the right
check.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: gadget: phonet: free requests in pn_bind()'s error path
Sebastian Andrzej Siewior [Mon, 22 Oct 2012 20:15:04 +0000 (22:15 +0200)]
usb: gadget: phonet: free requests in pn_bind()'s error path

commit d0eca719dd11ad0619e8dd6a1f3eceb95b0216dd upstream.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agop54usb: add USBIDs for two more p54usb devices
Christian Lamparter [Thu, 27 Dec 2012 14:18:20 +0000 (15:18 +0100)]
p54usb: add USBIDs for two more p54usb devices

commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream.

This patch adds USBIDs for:
- DrayTek Vigor 530
- Zoom 4410a

It also adds a note about Gemtek WUBI-100GW
and SparkLAN WL-682 USBID conflict [WUBI-100GW
is a ISL3886+NET2280 (LM86 firmare) solution,
whereas WL-682 is a ISL3887 (LM87 firmware)]
device.

Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows>

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agop54usb: add USB ID for T-Com Sinus 154 data II
Tomasz Guszkowski [Sat, 22 Dec 2012 17:30:01 +0000 (18:30 +0100)]
p54usb: add USB ID for T-Com Sinus 154 data II

commit 3194b7fcdf6caea338b5d2c72d76fed80437649c upstream.

Added USB ID for T-Com Sinus 154 data II.

Signed-off-by: Tomasz Guszkowski <tsg@o2.pl>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoALSA: usb-audio: Fix missing autopm for MIDI input
Takashi Iwai [Mon, 3 Dec 2012 10:30:50 +0000 (11:30 +0100)]
ALSA: usb-audio: Fix missing autopm for MIDI input

commit f5f165418cabf2218eb466c0e94693b8b1aee88b upstream.

The commit [88a8516a: ALSA: usbaudio: implement USB autosuspend] added
the support of autopm for USB MIDI output, but it didn't take the MIDI
input into account.

This patch adds the following for fixing the autopm:
- Manage the URB start at the first MIDI input stream open, instead of
  the time of instance creation
- Move autopm code to the common substream_open()
- Make snd_usbmidi_input_start/_stop() more robust and add the running
  state check

Reviewd-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoALSA: usb-audio: Avoid autopm calls after disconnection
Takashi Iwai [Mon, 3 Dec 2012 10:12:46 +0000 (11:12 +0100)]
ALSA: usb-audio: Avoid autopm calls after disconnection

commit 59866da9e4ae54819e3c4e0a8f426bdb0c2ef993 upstream.

Add a similar protection against the disconnection race and the
invalid use of usb instance after disconnection, as well as we've done
for the USB audio PCM.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51201

Reviewd-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotmpfs mempolicy: fix /proc/mounts corrupting memory
Hugh Dickins [Wed, 2 Jan 2013 10:01:33 +0000 (02:01 -0800)]
tmpfs mempolicy: fix /proc/mounts corrupting memory

commit f2a07f40dbc603c15f8b06e6ec7f768af67b424f upstream.

Recently I suggested using "mount -o remount,mpol=local /tmp" in NUMA
mempolicy testing.  Very nasty.  Reading /proc/mounts, /proc/pid/mounts
or /proc/pid/mountinfo may then corrupt one bit of kernel memory, often
in a page table (causing "Bad swap" or "Bad page map" warning or "Bad
pagetable" oops), sometimes in a vm_area_struct or rbnode or somewhere
worse.  "mpol=prefer" and "mpol=prefer:Node" are equally toxic.

Recent NUMA enhancements are not to blame: this dates back to 2.6.35,
when commit e17f74af351c "mempolicy: don't call mpol_set_nodemask() when
no_context" skipped mpol_parse_str()'s call to mpol_set_nodemask(),
which used to initialize v.preferred_node, or set MPOL_F_LOCAL in flags.
With slab poisoning, you can then rely on mpol_to_str() to set the bit
for node 0x6b6b, probably in the next page above the caller's stack.

mpol_parse_str() is only called from shmem_parse_options(): no_context
is always true, so call it unused for now, and remove !no_context code.
Set v.nodes or v.preferred_node or MPOL_F_LOCAL as mpol_to_str() might
expect.  Then mpol_to_str() can ignore its no_context argument also,
the mpol being appropriately initialized whether contextualized or not.
Rename its no_context unused too, and let subsequent patch remove them
(that's not needed for stable backporting, which would involve rejects).

I don't understand why MPOL_LOCAL is described as a pseudo-policy:
it's a reasonable policy which suffers from a confusing implementation
in terms of MPOL_PREFERRED with MPOL_F_LOCAL.  I believe this would be
much more robust if MPOL_LOCAL were recognized in switch statements
throughout, MPOL_F_LOCAL deleted, and MPOL_PREFERRED use the (possibly
empty) nodes mask like everyone else, instead of its preferred_node
variant (I presume an optimization from the days before MPOL_LOCAL).
But that would take me too long to get right and fully tested.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agomm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED
Christoffer Dall [Fri, 21 Dec 2012 18:03:50 +0000 (13:03 -0500)]
mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED

commit ad4b3fb7ff9940bcdb1e4cd62bd189d10fa636ba upstream.

Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and
(PageHead) is true, for tail pages.  If this is indeed the intended
behavior, which I doubt because it breaks cache cleaning on some ARM
systems, then the nomenclature is highly problematic.

This patch makes sure PageHead is only true for head pages and PageTail
is only true for tail pages, and neither is true for non-compound pages.

[ This buglet seems ancient - seems to have been introduced back in Apr
  2008 in commit 6a1e7f777f61: "pageflags: convert to the use of new
  macros".  And the reason nobody noticed is because the PageHead()
  tests are almost all about just sanity-checking, and only used on
  pages that are actual page heads.  The fact that the old code returned
  true for tail pages too was thus not really noticeable.   - Linus ]

Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: Steve Capper <Steve.Capper@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agovirtio: force vring descriptors to be allocated from lowmem
Will Deacon [Fri, 19 Oct 2012 13:03:33 +0000 (14:03 +0100)]
virtio: force vring descriptors to be allocated from lowmem

commit b92b1b89a33c172c075edccf6afb0edc41d851fd upstream.

Virtio devices may attempt to add descriptors to a virtqueue from atomic
context using GFP_ATOMIC allocation. This is problematic because such
allocations can fall outside of the lowmem mapping, causing virt_to_phys
to report bogus physical addresses which are subsequently passed to
userspace via the buffers for the virtual device.

This patch masks out __GFP_HIGH and __GFP_HIGHMEM from the requested
flags when allocating descriptors for a virtqueue. If an atomic
allocation is requested and later fails, we will return -ENOSPC which
will be handled by the driver.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agox86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops
Ondrej Zary [Tue, 11 Dec 2012 21:18:05 +0000 (22:18 +0100)]
x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops

commit ad68652412276f68ad4fe3e1ecf5ee6880876783 upstream.

Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20
line but resume code assumes that KBC was used.
The laptop will not resume from S3 otherwise but powers off after a while
and then powers on again stuck with a blank screen.

Fix it by enabling A20 using KBC in i8042_platform_init for x86.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoexec: do not leave bprm->interp on stack
Kees Cook [Thu, 20 Dec 2012 23:05:16 +0000 (15:05 -0800)]
exec: do not leave bprm->interp on stack

commit b66c5984017533316fd1951770302649baf1aa33 upstream.

If a series of scripts are executed, each triggering module loading via
unprintable bytes in the script header, kernel stack contents can leak
into the command line.

Normally execution of binfmt_script and binfmt_misc happens recursively.
However, when modules are enabled, and unprintable bytes exist in the
bprm->buf, execution will restart after attempting to load matching
binfmt modules.  Unfortunately, the logic in binfmt_script and
binfmt_misc does not expect to get restarted.  They leave bprm->interp
pointing to their local stack.  This means on restart bprm->interp is
left pointing into unused stack memory which can then be copied into the
userspace argv areas.

After additional study, it seems that both recursion and restart remains
the desirable way to handle exec with scripts, misc, and modules.  As
such, we need to protect the changes to interp.

This changes the logic to require allocation for any changes to the
bprm->interp.  To avoid adding a new kmalloc to every exec, the default
value is left as-is.  Only when passing through binfmt_script or
binfmt_misc does an allocation take place.

For a proof of concept, see DoTest.sh from:

   http://www.halfdog.net/Security/2012/LinuxKernelBinfmtScriptStackDataDisclosure/

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agopnpacpi: fix incorrect TEST_ALPHA() test
Alan Cox [Fri, 7 Dec 2012 22:11:14 +0000 (23:11 +0100)]
pnpacpi: fix incorrect TEST_ALPHA() test

commit cdc87c5a30f407ed1ce43d8a22261116873d5ef1 upstream.

TEST_ALPHA() is broken and always returns 0.

[akpm@linux-foundation.org: return false for '@' as well, per Bjorn]
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb/ipheth: Add iPhone 5 support
Jay Purohit [Sun, 14 Oct 2012 07:07:21 +0000 (07:07 +0000)]
usb/ipheth: Add iPhone 5 support

[ Upstream commit af1b85e49089f945deb46258b0fc4bc9910afb22 ]

I noticed that the iPhone ethernet driver did not support
iPhone 5. I quickly added support to it in my kernel, here's
a patch.

Signed-off-by: Jay Purohit <jspurohit@velocitylimitless.com>
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoirda: sir_dev: Fix copy/paste typo
Alexander Shiyan [Tue, 20 Nov 2012 09:59:11 +0000 (09:59 +0000)]
irda: sir_dev: Fix copy/paste typo

[ Upstream commit 2355a62bcbdcc4b567425bab036bfab6ade87eed ]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agone2000: add the right platform device
Alan Cox [Tue, 20 Nov 2012 06:31:57 +0000 (06:31 +0000)]
ne2000: add the right platform device

[ Upstream commit da9da01d9199b5bb15289d0859053c9aa3a34ac0 ]

Without this udev doesn't have a way to key the ne device to the platform
device.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agosctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall
Tommi Rantala [Thu, 22 Nov 2012 03:23:16 +0000 (03:23 +0000)]
sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall

[ Upstream commit 6e51fe7572590d8d86e93b547fab6693d305fd0d ]

Consider the following program, that sets the second argument to the
sendto() syscall incorrectly:

 #include <string.h>
 #include <arpa/inet.h>
 #include <sys/socket.h>

 int main(void)
 {
         int fd;
         struct sockaddr_in sa;

         fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/);
         if (fd < 0)
                 return 1;

         memset(&sa, 0, sizeof(sa));
         sa.sin_family = AF_INET;
         sa.sin_addr.s_addr = inet_addr("127.0.0.1");
         sa.sin_port = htons(11111);

         sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa));

         return 0;
 }

We get -ENOMEM:

 $ strace -e sendto ./demo
 sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 ENOMEM (Cannot allocate memory)

Propagate the error code from sctp_user_addto_chunk(), so that we will
tell user space what actually went wrong:

 $ strace -e sendto ./demo
 sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EFAULT (Bad address)

Noticed while running Trinity (the syscall fuzzer).

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agosctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails
Tommi Rantala [Tue, 27 Nov 2012 04:01:46 +0000 (04:01 +0000)]
sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails

[ Upstream commit be364c8c0f17a3dd42707b5a090b318028538eb9 ]

Trinity (the syscall fuzzer) discovered a memory leak in SCTP,
reproducible e.g. with the sendto() syscall by passing invalid
user space pointer in the second argument:

 #include <string.h>
 #include <arpa/inet.h>
 #include <sys/socket.h>

 int main(void)
 {
         int fd;
         struct sockaddr_in sa;

         fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/);
         if (fd < 0)
                 return 1;

         memset(&sa, 0, sizeof(sa));
         sa.sin_family = AF_INET;
         sa.sin_addr.s_addr = inet_addr("127.0.0.1");
         sa.sin_port = htons(11111);

         sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa));

         return 0;
 }

As far as I can tell, the leak has been around since ~2003.

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agobonding: fix race condition in bonding_store_slaves_active
nikolay@redhat.com [Thu, 29 Nov 2012 01:37:59 +0000 (01:37 +0000)]
bonding: fix race condition in bonding_store_slaves_active

[ Upstream commit e196c0e579902f42cf72414461fb034e5a1ffbf7 ]

Race between bonding_store_slaves_active() and slave manipulation
 functions. The bond_for_each_slave use in bonding_store_slaves_active()
 is not protected by any synchronization mechanism.
 NULL pointer dereference is easy to reach.
 Fixed by acquiring the bond->lock for the slave walk.

 v2: Make description text < 75 columns

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agobonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of...
Sarveshwar Bandi [Wed, 21 Nov 2012 04:35:03 +0000 (04:35 +0000)]
bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices.

[ Upstream commit 0e376bd0b791ac6ac6bdb051492df0769c840848 ]

Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach.

Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoLinux 3.0.57
Greg Kroah-Hartman [Mon, 17 Dec 2012 18:56:46 +0000 (10:56 -0800)]
Linux 3.0.57

11 years agopowerpc: Keep thread.dscr and thread.dscr_inherit in sync
Anton Blanchard [Mon, 3 Sep 2012 16:48:46 +0000 (16:48 +0000)]
powerpc: Keep thread.dscr and thread.dscr_inherit in sync

commit 00ca0de02f80924dfff6b4f630e1dff3db005e35 upstream.

When we update the DSCR either via emulation of mtspr(DSCR) or via
a change to dscr_default in sysfs we don't update thread.dscr.
We will eventually update it at context switch time but there is
a period where thread.dscr is incorrect.

If we fork at this point we will copy the old value of thread.dscr
into the child. To avoid this, always keep thread.dscr in sync with
reality.

This issue was found with the following testcase:

http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agopowerpc: Update DSCR on all CPUs when writing sysfs dscr_default
Anton Blanchard [Mon, 3 Sep 2012 16:47:56 +0000 (16:47 +0000)]
powerpc: Update DSCR on all CPUs when writing sysfs dscr_default

commit 1b6ca2a6fe56e7697d57348646e07df08f43b1bb upstream.

Writing to dscr_default in sysfs doesn't actually change the DSCR -
we rely on a context switch on each CPU to do the work. There is no
guarantee we will get a context switch in a reasonable amount of time
so fire off an IPI to force an immediate change.

This issue was found with the following test case:

http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoftrace: Clear bits properly in reset_iter_read()
Dan Carpenter [Sat, 9 Jun 2012 16:10:27 +0000 (19:10 +0300)]
ftrace: Clear bits properly in reset_iter_read()

commit 70f77b3f7ec010ff9624c1f2e39a81babc9e2429 upstream.

There is a typo here where '&' is used instead of '|' and it turns the
statement into a noop.  The original code is equivalent to:

iter->flags &= ~((1 << 2) & (1 << 4));

Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoxhci: Extend Fresco Logic MSI quirk.
Sarah Sharp [Wed, 17 Oct 2012 20:44:06 +0000 (13:44 -0700)]
xhci: Extend Fresco Logic MSI quirk.

commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 upstream.

Ali reports that plugging a device into the Fresco Logic xHCI host with
PCI device ID 1400 produces an IRQ error:

 do_IRQ: 3.176 No irq handler for vector (irq -1)

Other early Fresco Logic host revisions don't support MSI, even though
their PCI config space claims they do.  Extend the quirk to disabling
MSI to this chipset revision.  Also enable the short transfer quirk,
since it's likely this revision also has that quirk, and it should be
harmless to enable.

04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1d5c:1000
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 51
        Region 0: Memory at d4600000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000feeff00c  Data: 41b1
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: xhci_hcd

This patch should be backported to stable kernels as old as 2.6.36, that
contain the commit f5182b4155b9d686c5540a6822486400e34ddd98 "xhci:
Disable MSI for some Fresco Logic hosts."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: A Sh <smr.ash1991@gmail.com>
Tested-by: A Sh <smr.ash1991@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue
Alan Stern [Mon, 26 Nov 2012 17:36:21 +0000 (12:36 -0500)]
USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue

commit 50ce5c0683aa83eb161624ea89daa5a9eee0c2ce upstream.

This patch (as1636) is a partial workaround for a hardware bug
affecting OHCI controllers by NVIDIA at least, maybe others too.  When
the controller retires a Transfer Descriptor, it is supposed to add
the TD onto the Done Queue.  But sometimes this doesn't happen, with
the result that ohci-hcd never realizes the corresponding transfer has
finished.  Symptoms can vary; a typical result is that USB audio stops
working after a while.

The patch works around the problem by recognizing that TDs are always
processed in order.  Therefore, if a later TD is found on the Done
Queue than all the earlier TDs for the same endpoint must be finished
as well.

Unfortunately this won't solve the problem in cases where the missing
TD is the last one in the endpoint's queue.  A complete fix would
require a signficant amount of change to the driver.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
Zhang Rui [Tue, 4 Dec 2012 22:30:19 +0000 (23:30 +0100)]
ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000

commit 129ff8f8d58297b04f47b5d6fad81aa2d08404e1 upstream.

Or else the laptop will boot with a dimmed screen.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51141
Tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoACPI / PNP: Do not crash due to stale pointer use during system resume
Rafael J. Wysocki [Fri, 30 Nov 2012 12:05:05 +0000 (13:05 +0100)]
ACPI / PNP: Do not crash due to stale pointer use during system resume

commit a6b5e88c0e42093b9057856f35770966c8c591e3 upstream.

During resume from system suspend the 'data' field of
struct pnp_dev in pnpacpi_set_resources() may be a stale pointer,
due to removal of the associated ACPI device node object in the
previous suspend-resume cycle.  This happens, for example, if a
dockable machine is booted in the docking station and then suspended
and resumed and suspended again.  If that happens,
pnpacpi_build_resource_template() called from pnpacpi_set_resources()
attempts to use that pointer and crashes.

However, pnpacpi_set_resources() actually checks the device's ACPI
handle, attempts to find the ACPI device node object attached to it
and returns an error code if that fails, so in fact it knows what the
correct value of dev->data should be.  Use this observation to update
dev->data with the correct value if necessary and dump a call trace
if that's the case (once).

We still need to fix the root cause of this issue, but preventing
systems from crashing because of it is an improvement too.

Reported-and-tested-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51071
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoACPI / battery: Correct battery capacity values on Thinkpads
Kamil Iskra [Fri, 16 Nov 2012 21:28:58 +0000 (22:28 +0100)]
ACPI / battery: Correct battery capacity values on Thinkpads

commit 4000e626156935dfb626321ce09cae2c833eabbb upstream.

Add a quirk to correctly report battery capacity on 2010 and 2011
Lenovo Thinkpad models.

The affected models that I tested (x201, t410, t410s, and x220)
exhibit a problem where, when battery capacity reporting unit is mAh,
the values being reported are wrong.  Pre-2010 and 2012 models appear
to always report in mWh and are thus unaffected.  Also, in mid-2012
Lenovo issued a BIOS update for the 2011 models that fixes the issue
(tested on x220 with a post-1.29 BIOS).  No such update is available
for the 2010 models, so those still need this patch.

Problem description: for some reason, the affected Thinkpads switch
the reporting unit between mAh and mWh; generally, mAh is used when a
laptop is plugged in and mWh when it's unplugged, although a
suspend/resume or rmmod/modprobe is needed for the switch to take
effect.  The values reported in mAh are *always* wrong.  This does
not appear to be a kernel regression; I believe that the values were
never reported correctly.  I tested back to kernel 2.6.34, with
multiple machines and BIOS versions.

Simply plugging a laptop into mains before turning it on is enough to
reproduce the problem.  Here's a sample /proc/acpi/battery/BAT0/info
from Thinkpad x220 (before a BIOS update) with a 4-cell battery:

present:                 yes
design capacity:         2886 mAh
last full capacity:      2909 mAh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 145 mAh
design capacity low:     13 mAh
cycle count:              0
capacity granularity 1:  1 mAh
capacity granularity 2:  1 mAh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Once the laptop switches the unit to mWh (unplug from mains, suspend,
resume), the output changes to:

present:                 yes
design capacity:         28860 mWh
last full capacity:      29090 mWh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 1454 mWh
design capacity low:     200 mWh
cycle count:              0
capacity granularity 1:  1 mWh
capacity granularity 2:  1 mWh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Can you see how the values for "design capacity", etc., differ by a
factor of 10 instead of 14.8 (the design voltage of this battery)?
On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the
values reported in mWh are correct and the ones in mAh are not.

My guess is that this problem has been around ever since those
machines were released, but because the most common Thinkpad
batteries are rated at 10.8V, the error (8%) is small enough that it
simply hasn't been noticed or at least nobody could be bothered to
look into it.

My patch works around the problem by adjusting the incorrectly
reported mAh values by "10000 / design_voltage".  The patch also has
code to figure out if it should be activated or not.  It only
activates on Lenovo Thinkpads, only when the unit is mAh, and, as an
extra precaution, only when the battery capacity reported through
ACPI does not match what is reported through DMI (I've never
encountered a machine where the first two conditions would be true
but the last would not, but better safe than sorry).

I've been using this patch for close to a year on several systems
without any problems.

References: https://bugzilla.kernel.org/show_bug.cgi?id=41062
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: mark uas driver as BROKEN
Greg Kroah-Hartman [Wed, 28 Nov 2012 18:19:16 +0000 (10:19 -0800)]
USB: mark uas driver as BROKEN

commit fb37ef98015f864d22be223a0e0d93547cd1d4ef upstream.

As reported https://bugzilla.kernel.org/show_bug.cgi?id=51031, the UAS
driver causes problems and has been asked to be not built into any of
the major distributions.  To prevent users from running into problems
with it, and for distros that were not notified, just mark the whole
thing as broken.

Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: cp210x: add Virtenio Preon32 device id
Markus Becker [Thu, 22 Nov 2012 08:41:23 +0000 (09:41 +0100)]
USB: cp210x: add Virtenio Preon32 device id

commit 356fe44f4b8ece867bdb9876b1854d7adbef9de2 upstream.

Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: ftdi_sio: fixup BeagleBone A5+ quirk
Peter Korsgaard [Thu, 22 Nov 2012 15:30:46 +0000 (16:30 +0100)]
usb: ftdi_sio: fixup BeagleBone A5+ quirk

commit 1a88d5eee2ef2ad1d3c4e32043e9c4c5347d4fc1 upstream.

BeagleBone A5+ devices ended up getting shipped with the
'BeagleBone/XDS100V2' product string, and not XDS100 like it
was agreed, so adjust the quirk to match.

For details, see the thread on the beagle list:

https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJ

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ftdi_sio: Add support for Newport AGILIS motor drivers
Martin Teichmann [Wed, 21 Nov 2012 15:45:07 +0000 (16:45 +0100)]
USB: ftdi_sio: Add support for Newport AGILIS motor drivers

commit d7e14b375b40c04cd735b115713043b69a2c68ac upstream.

The Newport AGILIS model AG-UC8 compact piezo motor controller
(http://search.newport.com/?q=*&x2=sku&q2=AG-UC8)
is yet another device using an FTDI USB-to-serial chip. It works
fine with the ftdi_sio driver when adding

  options ftdi-sio product=0x3000 vendor=0x104d

to modprobe.d. udevadm reports "Newport" as the manufacturer,
and "Agilis" as the product name.

Signed-off-by: Martin Teichmann <lkb.teichmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: option: blacklist network interface on Huawei E173
Bjørn Mork [Sun, 25 Nov 2012 16:05:10 +0000 (17:05 +0100)]
USB: option: blacklist network interface on Huawei E173

commit f36446cf9bbebaa03a80d95cfeeafbaf68218249 upstream.

The Huawei E173 will normally appear as 12d1:1436 in Linux.  But
the modem has another mode with different device ID and a slightly
different set of descriptors. This is the mode used by Windows like
this:

  3Modem:      USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000
  Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001
  Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002
  PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003

All interfaces have the same ff/ff/ff class codes in this mode.
Blacklisting the network interface to allow it to be picked up by
the network driver.

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: add new zte 3g-dongle's pid to option.c
li.rui27@zte.com.cn [Tue, 20 Nov 2012 06:31:47 +0000 (14:31 +0800)]
USB: add new zte 3g-dongle's pid to option.c

commit 31b6a1048b7292efff8b5b53ae3d9d29adde385e upstream.

Signed-off-by: Rui li <li.rui27@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agox86: hpet: Fix masking of MSI interrupts
Jan Beulich [Fri, 2 Nov 2012 14:02:40 +0000 (14:02 +0000)]
x86: hpet: Fix masking of MSI interrupts

commit 6acf5a8c931da9d26c8dd77d784daaf07fa2bff0 upstream.

HPET_TN_FSB is not a proper mask bit; it merely toggles between MSI and
legacy interrupt delivery. The proper mask bit is HPET_TN_ENABLE, so
use both bits when (un)masking the interrupt.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5093E09002000078000A60E6@nat28.tlf.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotmpfs: fix shared mempolicy leak
Mel Gorman [Wed, 5 Dec 2012 22:01:41 +0000 (14:01 -0800)]
tmpfs: fix shared mempolicy leak

commit 18a2f371f5edf41810f6469cb9be39931ef9deb9 upstream.

This fixes a regression in 3.7-rc, which has since gone into stable.

Commit 00442ad04a5e ("mempolicy: fix a memory corruption by refcount
imbalance in alloc_pages_vma()") changed get_vma_policy() to raise the
refcount on a shmem shared mempolicy; whereas shmem_alloc_page() went
on expecting alloc_page_vma() to drop the refcount it had acquired.
This deserves a rework: but for now fix the leak in shmem_alloc_page().

Hugh: shmem_swapin() did not need a fix, but surely it's clearer to use
the same refcounting there as in shmem_alloc_page(), delete its onstack
mempolicy, and the strange mpol_cond_copy() and __mpol_cond_copy() -
those were invented to let swapin_readahead() make an unknown number of
calls to alloc_pages_vma() with one mempolicy; but since 00442ad04a5e,
alloc_pages_vma() has kept refcount in balance, so now no problem.

Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agotelephony: ijx: buffer overflow in ixj_write_cid()
Dan Carpenter [Mon, 3 Dec 2012 19:05:12 +0000 (22:05 +0300)]
telephony: ijx: buffer overflow in ixj_write_cid()

[Not needed in 3.8 or newer as this driver is removed there. - gregkh]

We get this from user space and nothing has been done to ensure that
these strings are NUL terminated.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agox86,AMD: Power driver support for AMD's family 16h processors
Boris Ostrovsky [Wed, 5 Dec 2012 11:12:42 +0000 (06:12 -0500)]
x86,AMD: Power driver support for AMD's family 16h processors

commit 22e32f4f57778ebc6e17812fa3008361c05d64f9 upstream.

Add family 16h PCI ID to AMD's power driver to allow it report
power consumption on these processors.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agomm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
Marek Szyprowski [Wed, 7 Nov 2012 14:37:07 +0000 (15:37 +0100)]
mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls

commit 387870f2d6d679746020fa8e25ef786ff338dc98 upstream.

dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag,
regardless the flags provided by the caller. This causes excessive
pruning of emergency memory pools without any good reason. Additionaly,
on ARM architecture any driver which is using dmapools will sooner or
later  trigger the following error:
"ERROR: 256 KiB atomic DMA coherent pool is too small!
Please increase it with coherent_pool= kernel parameter!".
Increasing the coherent pool size usually doesn't help much and only
delays such error, because all GFP_ATOMIC DMA allocations are always
served from the special, very limited memory pool.

This patch changes the dmapool code to correctly use gfp flags provided
by the dmapool caller.

Reported-by: Soeren Moch <smoch@web.de>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Soeren Moch <smoch@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoworkqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s
Tejun Heo [Tue, 4 Dec 2012 15:40:39 +0000 (07:40 -0800)]
workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s

commit fc4b514f2727f74a4587c31db87e0e93465518c3 upstream.

8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on
0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in
megaraid - it allocated work_struct, casted it to delayed_work and
then pass that into queue_delayed_work().

Previously, this was okay because 0 @delay short-circuited to
queue_work() before doing anything with delayed_work.  8852aac25e
moved 0 @delay test into __queue_delayed_work() after sanity check on
delayed_work making megaraid trigger BUG_ON().

Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix
BUG_ON() from incorrect use of delayed work"), this patch converts
BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such
abusers, if there are more, trigger warning but don't crash the
machine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agopowerpc/ptrace: Fix build with gcc 4.6
Benjamin Herrenschmidt [Mon, 26 Sep 2011 19:37:57 +0000 (19:37 +0000)]
powerpc/ptrace: Fix build with gcc 4.6

commit e69b742a6793dc5bf16f6eedca534d4bc10d68b2 upstream.

gcc (rightfully) complains that we are accessing beyond the
end of the fpr array (we do, to access the fpscr).

The only sane thing to do (whether anything in that code can be
called remotely sane is debatable) is to special case fpscr and
handle it as a separate statement.

I initially tried to do it it by making the array access conditional
to index < PT_FPSCR and using a 3rd else leg but for some reason gcc
was unable to understand it and still spewed the warning.

So I ended up with something a tad more intricated but it seems to
build on 32-bit and on 64-bit with and without VSX.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set
Paul Walmsley [Tue, 23 Oct 2012 19:32:59 +0000 (20:32 +0100)]
ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set

commit 39141ddfb63a664f26d3f42f64ee386e879b492c upstream.

After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix
saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board
started crashing during boot with omap2plus_defconfig:

[    3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[    3.915954]  mmcblk0: p1
[    4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    4.093719] Modules linked in:
[    4.096954] CPU: 0    Not tainted  (3.6.0-02232-g759e00b #570)
[    4.103149] PC is at vfp_reload_hw+0x1c/0x44
[    4.107666] LR is at __und_usr_fault_32+0x0/0x8

It turns out that the context save/restore fix unmasked a latent bug
in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make
VFPv3 usable on ARMv6").  When CONFIG_VFPv3 is set, but the kernel is
booted on a pre-VFPv3 core, the code attempts to save and restore the
d16-d31 VFP registers.  These are only present on non-D16 VFPv3+, so
this results in an undefined instruction exception.  The code didn't
crash before commit 846a136 because the save and restore code was
only touching d0-d15, present on all VFP.

Fix by implementing a request from Russell King to add a new HWCAP
flag that affirmatively indicates the presence of the d16-d31
registers:

   http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2

and some feedback from MÃ¥ns to clarify the name of the HWCAP flag.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Måns Rullgård <mans.rullgard@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoLinux 3.0.56
Greg Kroah-Hartman [Mon, 10 Dec 2012 18:45:23 +0000 (10:45 -0800)]
Linux 3.0.56

11 years agoscsi: Silence unnecessary warnings about ioctl to partition
Jan Kara [Fri, 15 Jun 2012 10:52:46 +0000 (12:52 +0200)]
scsi: Silence unnecessary warnings about ioctl to partition

commit 6d9359280753d2955f86d6411047516a9431eb51 upstream.

Sometimes, warnings about ioctls to partition happen often enough that they
form majority of the warnings in the kernel log and users complain. In some
cases warnings are about ioctls such as SG_IO so it's not good to get rid of
the warnings completely as they can ease debugging of userspace problems
when ioctl is refused.

Since I have seen warnings from lots of commands, including some proprietary
userspace applications, I don't think disallowing the ioctls for processes
with CAP_SYS_RAWIO will happen in the near future if ever. So lets just
stop warning for processes with CAP_SYS_RAWIO for which ioctl is allowed.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
CC: James Bottomley <JBottomley@parallels.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agodrm/i915: Add no-lvds quirk for Supermicro X7SPA-H
Chris Wilson [Thu, 18 Oct 2012 20:07:01 +0000 (21:07 +0100)]
drm/i915: Add no-lvds quirk for Supermicro X7SPA-H

commit c31407a3672aaebb4acddf90944a114fa5c8af7b upstream.

Reported-and-tested-by: Francois Tigeot <ftigeot@wolfpond.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55375
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoi915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
Calvin Walton [Fri, 24 Aug 2012 11:56:31 +0000 (07:56 -0400)]
i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard

commit a51d4ed01e5bb39d2cf36a12f9976ab08872c192 upstream.

This board is incorrectly detected as having an LVDS connector,
resulting in the VGA output (the only available output on the board)
showing the console only in the top-left 1024x768 pixels, and an extra
LVDS connector appearing in X.

It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10
chipset.

I've had this board for about a year, but this is the first time I
noticed the issue because I've been running it headless for most of its
life.

Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoACPI: missing break
Alan Cox [Thu, 25 Oct 2012 23:05:56 +0000 (01:05 +0200)]
ACPI: missing break

commit 879dca019dc43a1622edca3e7dde644b14b5acc5 upstream.

We handle NOTIFY_THROTTLING so don't then fall through to unsupported event.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoroute: release dst_entry.hh_cache when handling redirects
Michal Kubecek [Tue, 4 Dec 2012 10:09:13 +0000 (11:09 +0100)]
route: release dst_entry.hh_cache when handling redirects

Stable-3.0 commit 42ab5316 (ipv4: fix redirect handling) was
backport of mainline commit 9cc20b26 from 3.2-rc3 where hh
member of struct dst_entry was already gone.

However, in 3.0 we still have it and we have to clean it as
well, otherwise it keeps pointing to the cleaned up (and
unusable) hh_cache entry and packets cannot be sent out.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "sched, autogroup: Stop going ahead if autogroup is disabled"
Mike Galbraith [Mon, 3 Dec 2012 05:25:25 +0000 (06:25 +0100)]
Revert "sched, autogroup: Stop going ahead if autogroup is disabled"

commit fd8ef11730f1d03d5d6555aa53126e9e34f52f12 upstream.

This reverts commit 800d4d30c8f20bd728e5741a3b77c4859a613f7c.

Between commits 8323f26ce342 ("sched: Fix race in task_group()") and
800d4d30c8f2 ("sched, autogroup: Stop going ahead if autogroup is
disabled"), autogroup is a wreck.

With both applied, all you have to do to crash a box is disable
autogroup during boot up, then reboot..  boom, NULL pointer dereference
due to commit 800d4d30c8f2 not allowing autogroup to move things, and
commit 8323f26ce342 making that the only way to switch runqueues:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff81063ac0>] effective_load.isra.43+0x50/0x90
  Pid: 7047, comm: systemd-user-se Not tainted 3.6.8-smp #7 MEDIONPC MS-7502/MS-7502
  RIP: effective_load.isra.43+0x50/0x90
  Process systemd-user-se (pid: 7047, threadinfo ffff880221dde000, task ffff88022618b3a0)
  Call Trace:
    select_task_rq_fair+0x255/0x780
    try_to_wake_up+0x156/0x2c0
    wake_up_state+0xb/0x10
    signal_wake_up+0x28/0x40
    complete_signal+0x1d6/0x250
    __send_signal+0x170/0x310
    send_signal+0x40/0x80
    do_send_sig_info+0x47/0x90
    group_send_sig_info+0x4a/0x70
    kill_pid_info+0x3a/0x60
    sys_kill+0x97/0x1a0
    ? vfs_read+0x120/0x160
    ? sys_read+0x45/0x90
    system_call_fastpath+0x16/0x1b
  Code: 49 0f af 41 50 31 d2 49 f7 f0 48 83 f8 01 48 0f 46 c6 48 2b 07 48 8b bf 40 01 00 00 48 85 ff 74 3a 45 31 c0 48 8b 8f 50 01 00 00 <48> 8b 11 4c 8b 89 80 00 00 00 49 89 d2 48 01 d0 45 8b 59 58 4c
  RIP  [<ffffffff81063ac0>] effective_load.isra.43+0x50/0x90
   RSP <ffff880221ddfbd8>
  CR2: 0000000000000000

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoworkqueue: exit rescuer_thread() as TASK_RUNNING
Mike Galbraith [Wed, 28 Nov 2012 06:17:18 +0000 (07:17 +0100)]
workqueue: exit rescuer_thread() as TASK_RUNNING

commit 412d32e6c98527078779e5b515823b2810e40324 upstream.

A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling
off, never to be seen again.  In the case where this occurred, an exiting
thread hit reiserfs homebrew conditional resched while holding a mutex,
bringing the box to its knees.

PID: 18105  TASK: ffff8807fd412180  CPU: 5   COMMAND: "kdmflush"
 #0 [ffff8808157e7670] schedule at ffffffff8143f489
 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs]
 #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14
 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs]
 #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2
 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41
 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a
 #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88
 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850
 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f
    [exception RIP: kernel_thread_helper]
    RIP: ffffffff8144a5c0  RSP: ffff8808157e7f58  RFLAGS: 00000202
    RAX: 0000000000000000  RBX: 0000000000000000  RCX: 0000000000000000
    RDX: 0000000000000000  RSI: ffffffff8107af60  RDI: ffff8803ee491d18
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000000  R12: 0000000000000000
    R13: 0000000000000000  R14: 0000000000000000  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agomm: soft offline: split thp at the beginning of soft_offline_page()
Naoya Horiguchi [Thu, 29 Nov 2012 21:54:34 +0000 (13:54 -0800)]
mm: soft offline: split thp at the beginning of soft_offline_page()

commit 783657a7dc20e5c0efbc9a09a9dd38e238a723da upstream.

When we try to soft-offline a thp tail page, put_page() is called on the
tail page unthinkingly and VM_BUG_ON is triggered in put_compound_page().

This patch splits thp before going into the main body of soft-offlining.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agomm/vmemmap: fix wrong use of virt_to_page
Jianguo Wu [Thu, 29 Nov 2012 21:54:21 +0000 (13:54 -0800)]
mm/vmemmap: fix wrong use of virt_to_page

commit ae64ffcac35de0db628ba9631edf8ff34c5cd7ac upstream.

I enable CONFIG_DEBUG_VIRTUAL and CONFIG_SPARSEMEM_VMEMMAP, when doing
memory hotremove, there is a kernel BUG at arch/x86/mm/physaddr.c:20.

It is caused by free_section_usemap()->virt_to_page(), virt_to_page() is
only used for kernel direct mapping address, but sparse-vmemmap uses
vmemmap address, so it is going wrong here.

  ------------[ cut here ]------------
  kernel BUG at arch/x86/mm/physaddr.c:20!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: acpihp_drv acpihp_slot edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse vfat fat loop dm_mod coretemp kvm crc32c_intel ipv6 ixgbe igb iTCO_wdt i7core_edac edac_core pcspkr iTCO_vendor_support ioatdma microcode joydev sr_mod i2c_i801 dca lpc_ich mfd_core mdio tpm_tis i2c_core hid_generic tpm cdrom sg tpm_bios rtc_cmos button ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore usb_common sd_mod crc_t10dif processor thermal_sys hwmon scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic ata_piix libata megaraid_sas scsi_mod
  CPU 39
  Pid: 6454, comm: sh Not tainted 3.7.0-rc1-acpihp-final+ #45 QCI QSSC-S4R/QSSC-S4R
  RIP: 0010:[<ffffffff8103c908>]  [<ffffffff8103c908>] __phys_addr+0x88/0x90
  RSP: 0018:ffff8804440d7c08  EFLAGS: 00010006
  RAX: 0000000000000006 RBX: ffffea0012000000 RCX: 000000000000002c
  ...

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Reviewd-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoDove: Fix irq_to_pmu()
Russell King - ARM Linux [Sun, 18 Nov 2012 16:39:32 +0000 (16:39 +0000)]
Dove: Fix irq_to_pmu()

commit d356cf5a74afa32b40decca3c9dd88bc3cd63eb5 upstream.

PMU interrupts start at IRQ_DOVE_PMU_START, not IRQ_DOVE_PMU_START + 1.
Fix the condition.  (It may have been less likely to occur had the code
been written "if (irq >= IRQ_DOVE_PMU_START" which imho is the easier
to understand notation, and matches the normal way of thinking about
these things.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoDove: Attempt to fix PMU/RTC interrupts
Russell King - ARM Linux [Sun, 18 Nov 2012 16:29:44 +0000 (16:29 +0000)]
Dove: Attempt to fix PMU/RTC interrupts

commit 5d3df935426271016b895aecaa247101b4bfa35e upstream.

Fix the acknowledgement of PMU interrupts on Dove: some Dove hardware
has not been sensibly designed so that interrupts can be handled in a
race free manner.  The PMU is one such instance.

The pending (aka 'cause') register is a bunch of RW bits, meaning that
these bits can be both cleared and set by software (confirmed on the
Armada-510 on the cubox.)

Hardware sets the appropriate bit when an interrupt is asserted, and
software is required to clear the bits which are to be processed.  If
we write ~(1 << bit), then we end up asserting every other interrupt
except the one we're processing.  So, we need to do a read-modify-write
cycle to clear the asserted bit.

However, any interrupts which occur in the middle of this cycle will
also be written back as zero, which will also clear the new interrupts.

The upshot of this is: there is _no_ way to safely clear down interrupts
in this register (and other similarly behaving interrupt pending
registers on this device.)  The patch below at least stops us creating
new interrupts.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoLinux 3.0.55
Greg Kroah-Hartman [Thu, 6 Dec 2012 02:40:31 +0000 (18:40 -0800)]
Linux 3.0.55

11 years agox86-32: Export kernel_stack_pointer() for modules
H. Peter Anvin [Wed, 21 Nov 2012 06:21:02 +0000 (22:21 -0800)]
x86-32: Export kernel_stack_pointer() for modules

commit cb57a2b4cff7edf2a4e32c0163200e9434807e0a upstream.

Modules, in particular oprofile (and possibly other similar tools)
need kernel_stack_pointer(), so export it using EXPORT_SYMBOL_GPL().

Cc: Yang Wei <wei.yang@windriver.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Jun Zhang <jun.zhang@intel.com>
Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Philip Müller <philm@manjaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoLinux 3.0.54
Greg Kroah-Hartman [Mon, 3 Dec 2012 20:59:38 +0000 (12:59 -0800)]
Linux 3.0.54

11 years agommc: sdhci-s3c: fix the wrong number of max bus clocks
Jaehoon Chung [Wed, 19 Sep 2012 06:43:33 +0000 (14:43 +0800)]
mmc: sdhci-s3c: fix the wrong number of max bus clocks

commit 5feb54a1ab91a237e247c013b8c4fb100ea347b1 upstream.

We can use up to four bus-clocks; but on module remove, we didn't
disable the fourth bus clock.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoInput: bcm5974 - set BUTTONPAD property
Jussi Pakkanen [Wed, 11 Jan 2012 07:04:16 +0000 (23:04 -0800)]
Input: bcm5974 - set BUTTONPAD property

commit 52965cc012f7a3cf35f06485ec275ebf3b3fddae upstream.

Some bcm5974 trackpads have a physical button beneath the physical surface.
This patch sets the property bit so user space applications can detect the
trackpad type and act accordingly.

Signed-off-by: Jussi Pakkanen <jussi.pakkanen@canonical.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agox86, mce, therm_throt: Don't report power limit and package level thermal throttle...
Fenghua Yu [Fri, 4 Nov 2011 20:31:23 +0000 (13:31 -0700)]
x86, mce, therm_throt: Don't report power limit and package level thermal throttle events in mcelog

commit 29e9bf1841e4f9df13b4992a716fece7087dd237 upstream.

Thermal throttle and power limit events are not defined as MCE errors in x86
architecture and should not generate MCE errors in mcelog.

Current kernel generates fake software defined MCE errors for these events.
This may confuse users because they may think the machine has real MCE errors
while actually only thermal throttle or power limit events happen.

To make it worse, buggy firmware on some platforms may falsely generate
the events. Therefore, kernel reports MCE errors which users think as real
hardware errors. Although the firmware bugs should be fixed, on the other hand,
kernel should not report MCE errors either.

So mcelog is not a good mechanism to report these events. To report the events, we count them in respective counters (core_power_limit_count,
package_power_limit_count, core_throttle_count, and package_throttle_count) in
/sys/devices/system/cpu/cpu#/thermal_throttle/. Users can check the counters
for each event on each CPU. Please note that all CPU's on one package report
duplicate counters. It's user application's responsibity to retrieve a package
level counter for one package.

This patch doesn't report package level power limit, core level power limit, and
package level thermal throttle events in mcelog. When the events happen, only
report them in respective counters in sysfs.

Since core level thermal throttle has been legacy code in kernel for a while and
users accepted it as MCE error in mcelog, core level thermal throttle is still
reported in mcelog. In the mean time, the event is counted in a counter in sysfs
as well.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Borislav Petkov <bp@amd64.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20111215001945.GA21009@linux-os.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoacer-wmi: support for P key on TM8372
Merlin Schumacher [Mon, 23 Jan 2012 20:35:35 +0000 (04:35 +0800)]
acer-wmi: support for P key on TM8372

commit 67e1d34cd54cbf33f093f1dd53e7bda1124eb972 upstream.

BugLink: http://launchpad.net/bugs/865807
There is no entry for P key on TM8372, so when P key is pressed, only
"acer_wmi: Unknown key number - 0x29" in dmesg.

Signed-off-by: Merlin Schumacher <merlin.schumacher@gmail.com>
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agowatchdog: using u64 in get_sample_period()
Chuansheng Liu [Tue, 27 Nov 2012 00:29:54 +0000 (16:29 -0800)]
watchdog: using u64 in get_sample_period()

commit 8ffeb9b0e6369135bf03a073514f571ef10606b9 upstream.

In get_sample_period(), unsigned long is not enough:

  watchdog_thresh * 2 * (NSEC_PER_SEC / 5)

case1:
  watchdog_thresh is 10 by default, the sample value will be: 0xEE6B2800

case2:
 set watchdog_thresh is 20, the sample value will be: 0x1 DCD6 5000

In case2, we need use u64 to express the sample period.  Otherwise,
changing the threshold thru proc often can not be successful.

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: mct_u232: fix broken close
Johan Hovold [Thu, 25 Oct 2012 08:29:14 +0000 (10:29 +0200)]
USB: mct_u232: fix broken close

commit 5260e458f5eff269a43e4f1e9c47186c57b88ddb upstream.

Make sure generic close is called at close.

The driver relies on the generic write implementation but did not call
generic close.

Note that the call to kill the read urb is not redundant, as mct_u232
uses an interrupt urb from the second port as the read urb and that
generic close therefore fails to kill it.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
11 years agoget_dvb_firmware: fix download site for tda10046 firmware
Mauro Carvalho Chehab [Fri, 28 Sep 2012 19:16:00 +0000 (16:16 -0300)]
get_dvb_firmware: fix download site for tda10046 firmware

commit 25ec43d3e6306978cf66060ed18c4160ce8fc302 upstream.

The previous website doesn't exist anymore. Update it to one site that
actually exists.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoixgbe: add support for new 82599 device id
Emil Tantilov [Fri, 4 Nov 2011 06:43:29 +0000 (06:43 +0000)]
ixgbe: add support for new 82599 device id

commit 9e791e4a04c08868f02cd579a428a7268492e1b4 upstream.

Support for new 82599 based quad port adapter.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoixgbe: add support for new 82599 device
Emil Tantilov [Thu, 8 Sep 2011 08:30:14 +0000 (08:30 +0000)]
ixgbe: add support for new 82599 device

commit 7d145282da8d1ae4ba5f7ead8a4f51183496803c upstream.

This patch adds support for new device ID.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agosata_svw: check DMA start bit before reset
David Milburn [Mon, 29 Oct 2012 23:00:22 +0000 (18:00 -0500)]
sata_svw: check DMA start bit before reset

commit b03e66a6be91f8389fcd902ab6c1563db1c9c06b upstream.

If kdump is triggered with pending IO, controller may not respond causing
kdump to fail.

http://marc.info/?l=linux-ide&m=133032255424658&w=2

During error recovery ata_do_dev_read_id never completes due hang
in mmio_insw.

ata_do_dev_read_id
 ata_sff_data_xfer
  ioread16_rep
   mmio_insw

if DMA start bit is cleared before reset, PIO command is successful
and kdump succeeds.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoixgbe: add support for X540-AT1
joshua.a.hay@intel.com [Fri, 21 Sep 2012 00:08:21 +0000 (00:08 +0000)]
ixgbe: add support for X540-AT1

commit df376f0de167754da9b3ece4afdb5bb8bf3fbf3e upstream.

This patch adds device support for Ethernet Controller X540-AT1.

Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agobas_gigaset: fix pre_reset handling
Tilman Schmidt [Wed, 24 Oct 2012 08:44:32 +0000 (08:44 +0000)]
bas_gigaset: fix pre_reset handling

commit c6fdd8e5d0c65bb8821dc6da26ee1a2ddd58b3cc upstream.

The delayed work function int_in_work() may call usb_reset_device()
and thus, indirectly, the driver's pre_reset method. Trying to
cancel the work synchronously in that situation would deadlock.
Fix by avoiding cancel_work_sync() in the pre_reset method.

If the reset was NOT initiated by int_in_work() this might cause
int_in_work() to run after the post_reset method, with urb_int_in
already resubmitted, so handle that case gracefully.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoALSA: hda - Add support for Realtek ALC292
David Henningsson [Wed, 21 Nov 2012 07:57:58 +0000 (08:57 +0100)]
ALSA: hda - Add support for Realtek ALC292

commit af02dde8a609d8d071c4b31a82df811a55690a4a upstream.

We found a new codec ID 292, and that just a simple quirk would enable
sound output/input on this ALC292 chip.

BugLink: https://bugs.launchpad.net/bugs/1081466
Tested-by: Acelan Kao <acelan.kao@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoALSA: hda - Fix missing beep on ASUS X43U notebook
Duncan Roe [Wed, 10 Oct 2012 12:19:50 +0000 (14:19 +0200)]
ALSA: hda - Fix missing beep on ASUS X43U notebook

commit 7110005e8d5c3cd418fc4b64f9f124f004422a9a upstream.

Signed-off-by: Duncan Roe <duncan_roe@acslink.net.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoALSA: hda - Add new codec ALC283 ALC290 support
Kailang Yang [Sat, 6 Oct 2012 15:02:30 +0000 (17:02 +0200)]
ALSA: hda - Add new codec ALC283 ALC290 support

commit 7ff34ad80b7080fafaac8efa9ef0061708eddd51 upstream.

These are compatible with standard ALC269 parser.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agosparc64: not any error from do_sigaltstack() should fail rt_sigreturn()
Al Viro [Mon, 19 Nov 2012 03:27:03 +0000 (22:27 -0500)]
sparc64: not any error from do_sigaltstack() should fail rt_sigreturn()

commit fae2ae2a900a5c7bb385fe4075f343e7e2d5daa2 upstream.

If a signal handler is executed on altstack and another signal comes,
we will end up with rt_sigreturn() on return from the second handler
getting -EPERM from do_sigaltstack().  It's perfectly OK, since we
are not asking to change the settings; in fact, they couldn't have been
changed during the second handler execution exactly because we'd been
on altstack all along.  64bit sigreturn on sparc treats any error from
do_sigaltstack() as "SIGSEGV now"; we need to switch to the same semantics
we are using on other architectures.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agojbd: Fix lock ordering bug in journal_unmap_buffer()
Jan Kara [Fri, 23 Nov 2012 13:03:04 +0000 (14:03 +0100)]
jbd: Fix lock ordering bug in journal_unmap_buffer()

commit 25389bb207987b5774182f763b9fb65ff08761c8 upstream.

Commit 09e05d48 introduced a wait for transaction commit into
journal_unmap_buffer() in the case we are truncating a buffer undergoing commit
in the page stradding i_size on a filesystem with blocksize < pagesize. Sadly
we forgot to drop buffer lock before waiting for transaction commit and thus
deadlock is possible when kjournald wants to lock the buffer.

Fix the problem by dropping the buffer lock before waiting for transaction
commit. Since we are still holding page lock (and that is OK), buffer cannot
disappear under us.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agocan: bcm: initialize ifindex for timeouts without previous frame reception
Oliver Hartkopp [Mon, 26 Nov 2012 21:24:23 +0000 (22:24 +0100)]
can: bcm: initialize ifindex for timeouts without previous frame reception

commit 81b401100c01d2357031e874689f89bd788d13cd upstream.

Set in the rx_ifindex to pass the correct interface index in the case of a
message timeout detection. Usually the rx_ifindex value is set at receive
time. But when no CAN frame has been received the RX_TIMEOUT notification
did not contain a valid value.

Reported-by: Andre Naujoks <nautsch2@googlemail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoradeon: add AGPMode 1 quirk for RV250
Paul Bolle [Mon, 19 Nov 2012 20:17:31 +0000 (21:17 +0100)]
radeon: add AGPMode 1 quirk for RV250

commit 45171002b01b2e2ec4f991eca81ffd8430fd0aec upstream.

The Intel 82855PM host bridge / Mobility FireGL 9000 RV250 combination
in an (outdated) ThinkPad T41 needs AGPMode 1 for suspend/resume (under
KMS, that is). So add a quirk for it.

(Change R250 to RV250 in comment for preceding quirk too.)

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>