powerpc/mm: Add missing global TLB invalidate if cxl is active

commit 88b1bf7268f56887ca88eb09c6fb0f4fc970121a upstream.

Commit 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl") converted local
TLB invalidates to global if the cxl driver is active. This is necessary
because the CAPP snoops invalidations to forward them to the PSL on the
cxl adapter. However one path was forgotten. native_flush_hash_range()
still does local TLB invalidates, as found out the hard way recently.

This patch fixes it by following the same logic as previously: if the
cxl driver is active, the local TLB invalidates are 'upgraded' to
global.

Fixes: 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl")
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Add missing fixups

commit b884a190afcecdbef34ca508ea5ee88bb7c77861 upstream.

The rapf copy loops in the Meta usercopy code is missing some extable
entries for HTP cores with unaligned access checking enabled, where
faults occur on the instruction immediately after the faulting access.

Add the fixup labels and extable entries for these cases so that corner
case user copy failures don't cause kernel crashes.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Fix src fixup in from user rapf loops

commit 2c0b1df88b987a12d95ea1d6beaf01894f3cc725 upstream.

The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.

Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Set flags before ADDZ

commit fd40eee1290ad7add7aa665e3ce6b0f9fe9734b4 upstream.

The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP
to decide how far to rewind the source pointer. There is a special case
for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0
even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ
which is conditional upon the Z condition flag, but the AND instruction
which masked the TXStatus.LSM_STEP field didn't set the condition flags
based on the result.

Fix that now by using ANDS which does set the flags, and also marking
the condition codes as clobbered by the inline assembly.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Zero rest of buffer from copy_from_user

commit 563ddc1076109f2b3f88e6d355eab7b6fd4662cb upstream.

Currently we try to zero the destination for a failed read from userland
in fixup code in the usercopy.c macros. The rest of the destination
buffer is then zeroed from __copy_user_zeroing(), which is used for both
copy_from_user() and __copy_from_user().

Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0
before the fixup code entry labels, and __copy_from_user() shouldn't even
be zeroing the rest of the buffer.

Move the zeroing out into copy_from_user() and rename
__copy_user_zeroing() to raw_copy_from_user() since it no longer does
any zeroing. This also conveniently matches the name needed for
RAW_COPY_USER support in a later patch.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Add early abort to copy_to_user

commit fb8ea062a8f2e85256e13f55696c5c5f0dfdcc8b upstream.

When copying to userland on Meta, if any faults are encountered
immediately abort the copy instead of continuing on and repeatedly
faulting, and worse potentially copying further bytes successfully to
subsequent valid pages.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Fix alignment error checking

commit 2257211942bbbf6c798ab70b487d7e62f7835a1a upstream.

Fix the error checking of the alignment adjustment code in
raw_copy_from_user(), which mistakenly considers it safe to skip the
error check when aligning the source buffer on a 2 or 4 byte boundary.

If the destination buffer was unaligned it may have started to copy
using byte or word accesses, which could well be at the start of a new
(valid) source page. This would result in it appearing to have copied 1
or 2 bytes at the end of the first (invalid) page rather than none at
all.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/usercopy: Drop unused macros

commit ef62a2d81f73d9cddef14bc3d9097a57010d551c upstream.

Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger
copies between 5 and 16 bytes which are completely unused. Before fixing
zeroing lets drop these macros so there is less to fix.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Fix return value check in test_ringbuffer()

commit 62277de758b155dc04b78f195a1cb5208c37b2df upstream.

In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com
Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptrace: fix PTRACE_LISTEN race corrupting task->state

commit 5402e97af667e35e54177af8f6575518bf251d51 upstream.

In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED.  If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED.  This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.

Oleg said:
 "The kernel can crash or this can lead to other hard-to-debug problems.
  In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
  assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
  contract. Obviusly it is very wrong to manipulate task->state if this
  task is already running, or WAKING, or it sleeps again"

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com
Signed-off-by: Ben Segall <bsegall@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reset TreeId to zero on SMB2 TREE_CONNECT

commit 806a28efe9b78ffae5e2757e1ee924b8e50c08ab upstream.

Currently the cifs module breaks the CIFS specs on reconnect as
described in http://msdn.microsoft.com/en-us/library/cc246529.aspx:

"TreeId (4 bytes): Uniquely identifies the tree connect for the
command. This MUST be 0 for the SMB2 TREE_CONNECT Request."

Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: bmg160: reset chip when probing

commit 4bdc9029685ac03be50b320b29691766d2326c2b upstream.

The gyroscope chip might need to be reset to be used.

Without the chip being reset, the driver stopped at the first
regmap_read (to get the CHIP_ID) and failed to probe.

The datasheet of the gyroscope says that a minimum wait of 30ms after
the reset has to be done.

This patch has been checked on a BMX055 and the datasheet of the BMG160
and the BMI055 give the same reset register and bits.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region

commit 72f310481a08db821b614e7b5d00febcc9064b36 upstream.

We don't hold the mmap_sem while searching for VMAs (via find_vma), in
kvm_arch_prepare_memory_region, which can end up in expected failures.

Fixes: commit 8eef91239e57 ("arm/arm64: KVM: map MMIO regions at creation time")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Auger <eric.auger@rehat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
[ Handle dirty page logging failure case ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

commit 90f6e150e44a0dc3883110eeb3ab35d1be42b6bb upstream.

We don't hold the mmap_sem while searching for the VMAs when
we try to unmap each memslot for a VM. Fix this properly to
avoid unexpected results.

Fixes: commit 957db105c997 ("arm/arm64: KVM: Introduce stage2_unmap_vm")
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: lseek failed due to no FMODE_LSEEK.

commit 97fbfef6bd597888485b653175fb846c6998b60c upstream.

vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.

Comment From Greg Hackmann:
ashmem_llseek() passes the llseek() call through to the backing
shmem file.  91360b02ab48 ("ashmem: use vfs_llseek()") changed
this from directly calling the file's llseek() op into a VFS
layer call.  This also adds a check for the FMODE_LSEEK bit, so
without that bit ashmem_llseek() now always fails with -ESPIPE.

Fixes: 91360b02ab48 ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs: be careful of error returns from ops->show()

commit c8a139d001a1aab1ea8734db14b22dac9dd143b6 upstream.

ops->show() can return a negative error code.
Commit 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.

Commit 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.

This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.

I can reproduce it reliably only by putting delay like
usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
  echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state

The bug can be triggered without the usleep.

Fixes: 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()

commit e7e11f99564222d82f0ce84bd521e57d78a6b678 upstream.

In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the
'req->mip_levels' array. This array can be assigned any value from
the user space. As both the 'num_sizes' and the array is uint32_t,
it is easy to make 'num_sizes' overflow. The later 'mip_levels' is
used as the loop count. This can lead an oob write. Add the check of
'req->mip_levels' to avoid this.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Remove getparam error message

commit 53e16798b0864464c5444a204e1bb93ae246c429 upstream.

The mesa winsys sometimes uses unimplemented parameter requests to
check for features. Remove the error message to avoid bloating the
kernel log.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces

commit fe25deb7737ce6c0879ccf79c99fa1221d428bf2 upstream.

Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.

This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()

commit 63774069d9527a1aeaa4aa20e929ef5e8e9ecc38 upstream.

In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is
used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()),
which can leak useful addresses to dmesg.

Add check to avoid a size of 0.

Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()

commit 36274ab8c596f1240c606bb514da329add2a1bcd upstream.

Before memory allocations vmw_surface_define_ioctl() checks the
upper-bounds of a user-supplied size, but does not check if the
supplied size is 0.

Add check to avoid NULL pointer dereferences.

Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Type-check lookups of fence objects

commit f7652afa8eadb416b23eb57dec6f158529942041 upstream.

A malicious caller could otherwise hand over handles to other objects
causing all sorts of interesting problems.

Testing done: Ran a Fedora 25 desktop using both Xorg and
gnome-shell/Wayland.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.60

padata: avoid race in reordering

commit de5540d088fe97ad583cc7d396586437b32149a5 upstream.

Under extremely heavy uses of padata, crashes occur, and with list
debugging turned on, this happens instead:

[87487.298728] WARNING: CPU: 1 PID: 882 at lib/list_debug.c:33
__list_add+0xae/0x130
[87487.301868] list_add corruption. prev->next should be next
(ffffb17abfc043d0), but was ffff8dba70872c80. (prev=ffff8dba70872b00).
[87487.339011]  [<ffffffff9a53d075>] dump_stack+0x68/0xa3
[87487.342198]  [<ffffffff99e119a1>] ? console_unlock+0x281/0x6d0
[87487.345364]  [<ffffffff99d6b91f>] __warn+0xff/0x140
[87487.348513]  [<ffffffff99d6b9aa>] warn_slowpath_fmt+0x4a/0x50
[87487.351659]  [<ffffffff9a58b5de>] __list_add+0xae/0x130
[87487.354772]  [<ffffffff9add5094>] ? _raw_spin_lock+0x64/0x70
[87487.357915]  [<ffffffff99eefd66>] padata_reorder+0x1e6/0x420
[87487.361084]  [<ffffffff99ef0055>] padata_do_serial+0xa5/0x120

padata_reorder calls list_add_tail with the list to which its adding
locked, which seems correct:

spin_lock(&squeue->serial.lock);
list_add_tail(&padata->list, &squeue->serial.list);
spin_unlock(&squeue->serial.lock);

This therefore leaves only place where such inconsistency could occur:
if padata->list is added at the same time on two different threads.
This pdata pointer comes from the function call to
padata_get_next(pd), which has in it the following block:

next_queue = per_cpu_ptr(pd->pqueue, cpu);
padata = NULL;
reorder = &next_queue->reorder;
if (!list_empty(&reorder->list)) {
       padata = list_entry(reorder->list.next,
                           struct padata_priv, list);
       spin_lock(&reorder->lock);
       list_del_init(&padata->list);
       atomic_dec(&pd->reorder_objects);
       spin_unlock(&reorder->lock);

       pd->processed++;

       goto out;
}
out:
return padata;

I strongly suspect that the problem here is that two threads can race
on reorder list. Even though the deletion is locked, call to
list_entry is not locked, which means it's feasible that two threads
pick up the same padata object and subsequently call list_add_tail on
them at the same time. The fix is thus be hoist that lock outside of
that block.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk: Ensure users for current->bio_list can see the full list.

commit f5fe1b51905df7cfe4fdfd85c5fb7bc5b71a094f upstream.

Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
changed current->bio_list so that it did not contain *all* of the
queued bios, but only those submitted by the currently running
make_request_fn.

There are two places which walk the list and requeue selected bios,
and others that check if the list is empty.  These are no longer
correct.

So redefine current->bio_list to point to an array of two lists, which
contain all queued bios, and adjust various code to test or walk both
lists.

Signed-off-by: NeilBrown <neilb@suse.com>
Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
Signed-off-by: Jens Axboe <axboe@fb.com>
[jwang: backport to 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Restore changes in device-mapper from upstream version]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>

blk: improve order of bio handling in generic_make_request()

commit 79bd99596b7305ab08109a8bf44a6a4511dbf1cd upstream.

To avoid recursion on the kernel stack when stacked block devices
are in use, generic_make_request() will, when called recursively,
queue new requests for later handling.  They will be handled when the
make_request_fn for the current bio completes.

If any bios are submitted by a make_request_fn, these will ultimately
be handled seqeuntially.  If the handling of one of those generates
further requests, they will be added to the end of the queue.

This strict first-in-first-out behaviour can lead to deadlocks in
various ways, normally because a request might need to wait for a
previous request to the same device to complete.  This can happen when
they share a mempool, and can happen due to interdependencies
particular to the device.  Both md and dm have examples where this happens.

These deadlocks can be erradicated by more selective ordering of bios.
Specifically by handling them in depth-first order.  That is: when the
handling of one bio generates one or more further bios, they are
handled immediately after the parent, before any siblings of the
parent.  That way, when generic_make_request() calls make_request_fn
for some particular device, we can be certain that all previously
submited requests for that device have been completely handled and are
not waiting for anything in the queue of requests maintained in
generic_make_request().

An easy way to achieve this would be to use a last-in-first-out stack
instead of a queue.  However this will change the order of consecutive
bios submitted by a make_request_fn, which could have unexpected consequences.
Instead we take a slightly more complex approach.
A fresh queue is created for each call to a make_request_fn.  After it completes,
any bios for a different device are placed on the front of the main queue, followed
by any bios for the same device, followed by all bios that were already on
the queue before the make_request_fn was called.
This provides the depth-first approach without reordering bios on the same level.

This, by itself, it not enough to remove all deadlocks.  It just makes
it possible for drivers to take the extra step required themselves.

To avoid deadlocks, drivers must never risk waiting for a request
after submitting one to generic_make_request.  This includes never
allocing from a mempool twice in the one call to a make_request_fn.

A common pattern in drivers is to call bio_split() in a loop, handling
the first part and then looping around to possibly split the next part.
Instead, a driver that finds it needs to split a bio should queue
(with generic_make_request) the second part, handle the first part,
and then return.  The new code in generic_make_request will ensure the
requests to underlying bios are processed first, then the second bio
that was split off.  If it splits again, the same process happens.  In
each case one bio will be completely handled before the next one is attempted.

With this is place, it should be possible to disable the
punt_bios_to_recover() recovery thread for many block devices, and
eventually it may be possible to remove it completely.

Ref: http://www.spinics.net/lists/raid/msg54680.html
Tested-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Inspired-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
[jwang: backport to 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: reset: at91-poweroff: timely shutdown LPDDR memories

commit 0b0408745e7ff24757cbfd571d69026c0ddb803c upstream.

LPDDR memories can only handle up to 400 uncontrolled power off. Ensure the
proper power off sequence is used before shutting down the platform.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: kvm_io_bus_unregister_dev() should never fail

commit 90db10434b163e46da413d34db8d0e77404cc645 upstream.

No caller currently checks the return value of
kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on
freeing their device. A stale reference will remain in the io_bus,
getting at least used again, when the iobus gets teared down on
kvm_destroy_vm() - leading to use after free errors.

There is nothing the callers could do, except retrying over and over
again.

So let's simply remove the bus altogether, print an error and make
sure no one can access this broken bus again (returning -ENOMEM on any
attempt to access it).

Fixes: e93f8a0f821e ("KVM: convert io_bus to SRCU")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: s35390a: improve irq handling

commit 3bd32722c827d00eafe8e6d5b83e9f3148ea7c7e upstream.

On some QNAP NAS devices the rtc can wake the machine. Several people
noticed that once the machine was woken this way it fails to shut down.
That's because the driver fails to acknowledge the interrupt and so it
keeps active and restarts the machine immediatly after shutdown. See
https://bugs.debian.org/794266 for a bug report.

Doing this correctly requires to interpret the INT2 flag of the first read
of the STATUS1 register because this bit is cleared by read.

Note this is not maximally robust though because a pending irq isn't
detected when the STATUS1 register was already read (and so INT2 is not
set) but the irq was not disabled. But that is a hardware imposed problem
that cannot easily be fixed by software.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: s35390a: implement reset routine as suggested by the reference

commit 8e6583f1b5d1f5f129b873f1428b7e414263d847 upstream.

There were two deviations from the reference manual: you have to wait
half a second when POC is active and you might have to repeat
initialization when POC or BLD are still set after the sequence.

Note however that as POC and BLD are cleared by read the driver might
not be able to detect that a reset is necessary. I don't have a good
idea how to fix this.

Additionally report the value read from STATUS1 to the caller. This
prepares the next patch.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: s35390a: make sure all members in the output are set

The rtc core calls the .read_alarm with all fields initialized to 0. As
the s35390a driver doesn't touch some fields the returned date is
interpreted as a date in January 1900. So make sure all fields are set
to -1; some of them are then overwritten with the right data depending
on the hardware state.

In mainline this is done by commit d68778b80dd7 ("rtc: initialize output
parameter for read alarm to "uninitialized"") in the core. This is
considered to dangerous for stable as it might have side effects for
other rtc drivers that might for example rely on alarm->time.tm_sec
being initialized to 0.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: s35390a: fix reading out alarm

commit f87e904ddd8f0ef120e46045b0addeb1cc88354e upstream.

There are several issues fixed in this patch:

 - When alarm isn't enabled, set .enabled to zero instead of returning
   -EINVAL.
 - Ignore how IRQ1 is configured when determining if IRQ2 is on.
 - The three alarm registers have an enable flag which must be
   evaluated.
 - The chip always triggers when the seconds register gets 0.

Note that the rtc framework however doesn't handle the result correctly
because it doesn't check wday being initialized and so interprets an
alarm being set for 10:00 AM in three days as 10:00 AM tomorrow (or
today if that's not over yet).

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Lantiq: Fix cascaded IRQ setup

commit 6c356eda225e3ee134ed4176b9ae3a76f793f4dd upstream.

With the IRQ stack changes integrated, the XRX200 devices started
emitting a constant stream of kernel messages like this:

[  565.415310] Spurious IRQ: CAUSE=0x1100c300

This is caused by IP0 getting handled by plat_irq_dispatch() rather than
its vectored interrupt handler, which is fixed by commit de856416e714
("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch").

Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly
by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ
for all MIPS CPU interrupts.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15077/
[james.hogan@imgtec.com: tweaked commit message]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()

commit c9d398fa237882ea07167e23bcfc5e6847066518 upstream.

I found the race condition which triggers the following bug when
move_pages() and soft offline are called on a single hugetlb page
concurrently.

    Soft offlining page 0x119400 at 0x700000000000
    BUG: unable to handle kernel paging request at ffffea0011943820
    IP: follow_huge_pmd+0x143/0x190
    PGD 7ffd2067
    PUD 7ffd1067
    PMD 0
        [61163.582052] Oops: 0000 [#1] SMP
    Modules linked in: binfmt_misc ppdev virtio_balloon parport_pc pcspkr i2c_piix4 parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi virtio_blk 8139too crc32c_intel ata_piix serio_raw libata virtio_pci 8139cp virtio_ring virtio mii floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: cap_check]
    CPU: 0 PID: 22573 Comm: iterate_numa_mo Tainted: P           OE   4.11.0-rc2-mm1+ #2
    Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
    RIP: 0010:follow_huge_pmd+0x143/0x190
    RSP: 0018:ffffc90004bdbcd0 EFLAGS: 00010202
    RAX: 0000000465003e80 RBX: ffffea0004e34d30 RCX: 00003ffffffff000
    RDX: 0000000011943800 RSI: 0000000000080001 RDI: 0000000465003e80
    RBP: ffffc90004bdbd18 R08: 0000000000000000 R09: ffff880138d34000
    R10: ffffea0004650000 R11: 0000000000c363b0 R12: ffffea0011943800
    R13: ffff8801b8d34000 R14: ffffea0000000000 R15: 000077ff80000000
    FS:  00007fc977710740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffea0011943820 CR3: 000000007a746000 CR4: 00000000001406f0
    Call Trace:
     follow_page_mask+0x270/0x550
     SYSC_move_pages+0x4ea/0x8f0
     SyS_move_pages+0xe/0x10
     do_syscall_64+0x67/0x180
     entry_SYSCALL64_slow_path+0x25/0x25
    RIP: 0033:0x7fc976e03949
    RSP: 002b:00007ffe72221d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000117
    RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc976e03949
    RDX: 0000000000c22390 RSI: 0000000000001400 RDI: 0000000000005827
    RBP: 00007ffe72221e00 R08: 0000000000c2c3a0 R09: 0000000000000004
    R10: 0000000000c363b0 R11: 0000000000000246 R12: 0000000000400650
    R13: 00007ffe72221ee0 R14: 0000000000000000 R15: 0000000000000000
    Code: 81 e4 ff ff 1f 00 48 21 c2 49 c1 ec 0c 48 c1 ea 0c 4c 01 e2 49 bc 00 00 00 00 00 ea ff ff 48 c1 e2 06 49 01 d4 f6 45 bc 04 74 90 <49> 8b 7c 24 20 40 f6 c7 01 75 2b 4c 89 e7 8b 47 1c 85 c0 7e 2a
    RIP: follow_huge_pmd+0x143/0x190 RSP: ffffc90004bdbcd0
    CR2: ffffea0011943820
    ---[ end trace e4f81353a2d23232 ]---
    Kernel panic - not syncing: Fatal exception
    Kernel Offset: disabled

This bug is triggered when pmd_present() returns true for non-present
hugetlb, so fixing the present check in follow_huge_pmd() prevents it.
Using pmd_present() to determine present/non-present for hugetlb is not
correct, because pmd_present() checks multiple bits (not only
_PAGE_PRESENT) for historical reason and it can misjudge hugetlb state.

Fixes: e66f17ff7177 ("mm/hugetlb: take page table lock in follow_huge_pmd()")
Link: http://lkml.kernel.org/r/1490149898-20231-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags

commit ce4b4f228e51219b0b79588caf73225b08b5b779 upstream.

We were accidentally only overriding the first VRAM placement. For BOs
with the RADEON_GEM_NO_CPU_ACCESS flag set,
radeon_ttm_placement_from_domain creates a second VRAM placment with
fpfn == 0. If VRAM is almost full, the first VRAM placement with
fpfn > 0 may not work, but the second one with fpfn == 0 always will
(the BO's current location trivially satisfies it). Because "moving"
the BO to its current location puts it back on the LRU list, this
results in an infinite loop.

Fixes: 2a85aedd117c ("drm/radeon: Try evicting from CPU accessible to
                      inaccessible VRAM first")
Reported-by: Zachary Michaels <zmichaels@oblong.com>
Reported-and-Tested-by: Julien Isorce <jisorce@oblong.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: clear bus pointer when destroyed

commit df630b8c1e851b5e265dc2ca9c87222e342c093b upstream.

When releasing the bus, let's clear the bus pointers to mark it out. If
any further device unregister happens on this bus, we know that we're
done if we found the bus being released already.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: fix linked-list corruption in rh_call_control()

commit 1633682053a7ee8058e10c76722b9b28e97fb73f upstream.

Using KASAN, Dmitry found a bug in the rh_call_control() routine: If
buffer allocation fails, the routine returns immediately without
unlinking its URB from the control endpoint, eventually leading to
linked-list corruption.

This patch fixes the problem by jumping to the end of the routine
(where the URB is unlinked) when an allocation failure occurs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: atmel: fix TX path in atmel_console_write()

commit 497e1e16f45c70574dc9922c7f75c642c2162119 upstream.

A side effect of 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA
from transmitting in stop_tx") is that the console can be called with
TX path disabled. Then the system would hang trying to push charecters
out in atmel_console_putchar().

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: atmel: fix race condition (TX+DMA)

commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream.

If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).

Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: Do not create a platform_device for IOAPIC/IOxAPIC

commit 08f63d97749185fab942a3a47ed80f5bd89b8b7d upstream.

No platform-device is required for IO(x)APICs, so don't even
create them.

[ rjw: This fixes a problem with leaking platform device objects
  after IOAPIC/IOxAPIC hot-removal events.]

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: Fix incompatibility with mcount-based function graph tracing

commit 61b79e16c68d703dde58c25d3935d67210b7d71b upstream.

Paul Menzel reported a warning:

  WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0
  Bad frame pointer: expected f6919d98, received f6919db0
    from func acpi_pm_device_sleep_wake return to c43b6f9d

The warning means that function graph tracing is broken for the
acpi_pm_device_sleep_wake() function.  That's because the ACPI Makefile
unconditionally sets the '-Os' gcc flag to optimize for size.  That's an
issue because mcount-based function graph tracing is incompatible with
'-Os' on x86, thanks to the following gcc bug:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109

I have another patch pending which will ensure that mcount-based
function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on
x86.

But this patch is needed in addition to that one because the ACPI
Makefile overrides that config option for no apparent reason.  It has
had this flag since the beginning of git history, and there's no related
comment, so I don't know why it's there.  As far as I can tell, there's
no reason for it to be there.  The appropriate behavior is for it to
honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the
kernel.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: atmel-classd: fix audio clock rate

commit cd3ac9affc43b44f49d7af70d275f0bd426ba643 upstream.

Fix the audio clock rate according to the datasheet.

Reported-by: Dushara Jayasinghe <dushara@successful.com.au>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - fix a problem for lineout on a Dell AIO machine

commit 2f726aec19a9d2c63bec9a8a53a3910ffdcd09f8 upstream.

On this Dell AIO machine, the lineout jack does not work.

We found the pin 0x1a is assigned to lineout on this machine, and in
the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the
heaset-set mic problem for this machine, this fixup will redefine
the pin 0x1a to headphone-mic, as a result the lineout doesn't
work anymore.

After consulting with Dell, they told us this machine doesn't support
microphone via headset jack, so we add a new fixup which only defines
the pin 0x18 as the headset-mic.

[rearranged the fixup insertion position by tiwai in order to make the
 merge with other branches easier -- tiwai]

Fixes: 59ec4b57bcae ("ALSA: hda - Fix headset mic detection problem for two dell machines")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix race during FIFO resize

commit 2d7d54002e396c180db0c800c1046f0a3c471597 upstream.

When a new event is queued while processing to resize the FIFO in
snd_seq_fifo_clear(), it may lead to a use-after-free, as the old pool
that is being queued gets removed.  For avoiding this race, we need to
close the pool to be deleted and sync its usage before actually
deleting it.

The issue was spotted by syzkaller.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: fix ata xfer length

commit 9702c67c6066f583b629cf037d2056245bb7a8e6 upstream.

The total ata xfer length may not be calculated properly, in that we do
not use the proper method to get an sg element dma length.

According to the code comment, sg_dma_len() should be used after
dma_map_sg() is called.

This issue was found by turning on the SMMUv3 in front of the hisi_sas
controller in hip07. Multiple sg elements were being combined into a
single element, but the original first element length was being use as
the total xfer length.

Fixes: ff2aeb1eb64c8a4770a6 ("libata: convert to chained sg")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: check length passed to SG_NEXT_CMD_LEN

commit bf33f87dd04c371ea33feb821b60d63d754e3124 upstream.

The user can control the size of the next command passed along, but the
value passed to the ioctl isn't checked against the usable max command
size.

Signed-off-by: Peter Chang <dpf@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: fix hang on ata passthrough commands

commit ffb58456589443ca572221fabbdef3db8483a779 upstream.

mpt3sas has a firmware failure where it can only handle one pass through
ATA command at a time.  If another comes in, contrary to the SAT
standard, it will hang until the first one completes (causing long
commands like secure erase to timeout).  The original fix was to block
the device when an ATA command came in, but this caused a regression
with

commit 669f044170d8933c3d66d231b69ea97cb8447338
Author: Bart Van Assche <bart.vanassche@sandisk.com>
Date:   Tue Nov 22 16:17:13 2016 -0800

    scsi: srp_transport: Move queuecommand() wait code to SCSI core

So fix the original fix of the secure erase timeout by properly
returning SAM_STAT_BUSY like the SAT recommends.  The original patch
also had a concurrency problem since scsih_qcmd is lockless at that
point (this is fixed by using atomic bitops to set and test the flag).

[mkp: addressed feedback wrt. test_bit and fixed whitespace]

Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/setup: Don't relocate p2m over existing one

commit 7ecec8503af37de6be4f96b53828d640a968705f upstream.

When relocating the p2m, take special care not to relocate it so
that is overlaps with the current location of the p2m/initrd. This is
needed since the full extent of the current location is not marked as a
reserved region in the e820.

This was seen to happen to a dom0 with a large initial p2m and a small
reserved region in the middle of the initial p2m.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: force GFP_NOIO for socket allocations

commit 633ee407b9d15a75ac9740ba9d3338815e1fcb95 upstream.

sock_alloc_inode() allocates socket+inode and socket_wq with
GFP_KERNEL, which is not allowed on the writeback path:

    Workqueue: ceph-msgr con_work [libceph]
    ffff8810871cb018 0000000000000046 0000000000000000 ffff881085d40000
    0000000000012b00 ffff881025cad428 ffff8810871cbfd8 0000000000012b00
    ffff880102fc1000 ffff881085d40000 ffff8810871cb038 ffff8810871cb148
    Call Trace:
    [<ffffffff816dd629>] schedule+0x29/0x70
    [<ffffffff816e066d>] schedule_timeout+0x1bd/0x200
    [<ffffffff81093ffc>] ? ttwu_do_wakeup+0x2c/0x120
    [<ffffffff81094266>] ? ttwu_do_activate.constprop.135+0x66/0x70
    [<ffffffff816deb5f>] wait_for_completion+0xbf/0x180
    [<ffffffff81097cd0>] ? try_to_wake_up+0x390/0x390
    [<ffffffff81086335>] flush_work+0x165/0x250
    [<ffffffff81082940>] ? worker_detach_from_pool+0xd0/0xd0
    [<ffffffffa03b65b1>] xlog_cil_force_lsn+0x81/0x200 [xfs]
    [<ffffffff816d6b42>] ? __slab_free+0xee/0x234
    [<ffffffffa03b4b1d>] _xfs_log_force_lsn+0x4d/0x2c0 [xfs]
    [<ffffffff811adc1e>] ? lookup_page_cgroup_used+0xe/0x30
    [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs]
    [<ffffffffa03b4dcf>] xfs_log_force_lsn+0x3f/0xf0 [xfs]
    [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs]
    [<ffffffffa03a62c6>] xfs_iunpin_wait+0xc6/0x1a0 [xfs]
    [<ffffffff810aa250>] ? wake_atomic_t_function+0x40/0x40
    [<ffffffffa039a723>] xfs_reclaim_inode+0xa3/0x330 [xfs]
    [<ffffffffa039ac07>] xfs_reclaim_inodes_ag+0x257/0x3d0 [xfs]
    [<ffffffffa039bb13>] xfs_reclaim_inodes_nr+0x33/0x40 [xfs]
    [<ffffffffa03ab745>] xfs_fs_free_cached_objects+0x15/0x20 [xfs]
    [<ffffffff811c0c18>] super_cache_scan+0x178/0x180
    [<ffffffff8115912e>] shrink_slab_node+0x14e/0x340
    [<ffffffff811afc3b>] ? mem_cgroup_iter+0x16b/0x450
    [<ffffffff8115af70>] shrink_slab+0x100/0x140
    [<ffffffff8115e425>] do_try_to_free_pages+0x335/0x490
    [<ffffffff8115e7f9>] try_to_free_pages+0xb9/0x1f0
    [<ffffffff816d56e4>] ? __alloc_pages_direct_compact+0x69/0x1be
    [<ffffffff81150cba>] __alloc_pages_nodemask+0x69a/0xb40
    [<ffffffff8119743e>] alloc_pages_current+0x9e/0x110
    [<ffffffff811a0ac5>] new_slab+0x2c5/0x390
    [<ffffffff816d71c4>] __slab_alloc+0x33b/0x459
    [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0
    [<ffffffff8164bda1>] ? inet_sendmsg+0x71/0xc0
    [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0
    [<ffffffff811a21f2>] kmem_cache_alloc+0x1a2/0x1b0
    [<ffffffff815b906d>] sock_alloc_inode+0x2d/0xd0
    [<ffffffff811d8566>] alloc_inode+0x26/0xa0
    [<ffffffff811da04a>] new_inode_pseudo+0x1a/0x70
    [<ffffffff815b933e>] sock_alloc+0x1e/0x80
    [<ffffffff815ba855>] __sock_create+0x95/0x220
    [<ffffffff815baa04>] sock_create_kern+0x24/0x30
    [<ffffffffa04794d9>] con_work+0xef9/0x2050 [libceph]
    [<ffffffffa04aa9ec>] ? rbd_img_request_submit+0x4c/0x60 [rbd]
    [<ffffffff81084c19>] process_one_work+0x159/0x4f0
    [<ffffffff8108561b>] worker_thread+0x11b/0x530
    [<ffffffff81085500>] ? create_worker+0x1d0/0x1d0
    [<ffffffff8108b6f9>] kthread+0xc9/0xe0
    [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90
    [<ffffffff816e1b98>] ret_from_fork+0x58/0x90
    [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90

Use memalloc_noio_{save,restore}() to temporarily force GFP_NOIO here.

Link: http://tracker.ceph.com/issues/19309
Reported-by: Sergey Jerusalimov <wintchester@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.59

sched/rt: Add a missing rescheduling point

commit 619bd4a71874a8fd78eb6ccf9f272c5e98bcc7b7 upstream.

Since the change in commit:

  fd7a4bed1835 ("sched, rt: Convert switched_{from, to}_rt() / prio_changed_rt() to balance callbacks")

... we don't reschedule a task under certain circumstances:

Lets say task-A, SCHED_OTHER, is running on CPU0 (and it may run only on
CPU0) and holds a PI lock. This task is removed from the CPU because it
used up its time slice and another SCHED_OTHER task is running. Task-B on
CPU1 runs at RT priority and asks for the lock owned by task-A. This
results in a priority boost for task-A. Task-B goes to sleep until the
lock has been made available. Task-A is already runnable (but not active),
so it receives no wake up.

The reality now is that task-A gets on the CPU once the scheduler decides
to remove the current task despite the fact that a high priority task is
enqueued and waiting. This may take a long time.

The desired behaviour is that CPU0 immediately reschedules after the
priority boost which made task-A the task with the lowest priority.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: fd7a4bed1835 ("sched, rt: Convert switched_{from, to}_rt() prio_changed_rt() to balance callbacks")
Link: http://lkml.kernel.org/r/20170124144006.29821-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: remove broken support for detecting keyring key revocation

commit 1b53cf9815bb4744958d41f3795d5d5a1d365e2d upstream.

Filesystem encryption ostensibly supported revoking a keyring key that
had been used to "unlock" encrypted files, causing those files to become
"locked" again.  This was, however, buggy for several reasons, the most
severe of which was that when key revocation happened to be detected for
an inode, its fscrypt_info was immediately freed, even while other
threads could be using it for encryption or decryption concurrently.
This could be exploited to crash the kernel or worse.

This patch fixes the use-after-free by removing the code which detects
the keyring key having been revoked, invalidated, or expired.  Instead,
an encrypted inode that is "unlocked" now simply remains unlocked until
it is evicted from memory.  Note that this is no worse than the case for
block device-level encryption, e.g. dm-crypt, and it still remains
possible for a privileged user to evict unused pages, inodes, and
dentries by running 'sync; echo 3 > /proc/sys/vm/drop_caches', or by
simply unmounting the filesystem.  In fact, one of those actions was
already needed anyway for key revocation to work even somewhat sanely.
This change is not expected to break any applications.

In the future I'd like to implement a real API for fscrypt key
revocation that interacts sanely with ongoing filesystem operations ---
waiting for existing operations to complete and blocking new operations,
and invalidating and sanitizing key material and plaintext from the VFS
caches.  But this is a hard problem, and for now this bug must be fixed.

This bug affected almost all versions of ext4, f2fs, and ubifs
encryption, and it was potentially reachable in any kernel configured
with encryption support (CONFIG_EXT4_ENCRYPTION=y,
CONFIG_EXT4_FS_ENCRYPTION=y, CONFIG_F2FS_FS_ENCRYPTION=y, or
CONFIG_UBIFS_FS_ENCRYPTION=y).  Note that older kernels did not use the
shared fs/crypto/ code, but due to the potential security implications
of this bug, it may still be worthwhile to backport this fix to them.

Fixes: b7236e21d55f ("ext4 crypto: reorganize how we store keys in the inode")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/ptrace: Reject partial NT_METAG_RPIPE writes

commit 7195ee3120d878259e8d94a5d9f808116f34d5ea upstream.

It's not clear what behaviour is sensible when doing partial write of
NT_METAG_RPIPE, so just don't bother.

This patch assumes that userspace will never rely on a partial SETREGSET
in this case, since it's not clear what should happen anyway.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS

commit 5fe81fe98123ce41265c65e95d34418d30d005d1 upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill TXSTATUS, a well-defined default value is used, based on the
task's current value.

Suggested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag/ptrace: Preserve previous registers for short regset write

commit a78ce80d2c9178351b34d78fec805140c29c193e upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc/ptrace: Preserve previous registers for short regset write

commit d3805c546b275c8cc7d40f759d029ae92c7175f2 upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips/ptrace: Preserve previous registers for short regset write

commit d614fd58a2834cfe4efa472c33c8f3ce2338b09b upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

h8300/ptrace: Fix incorrect register transfer count

commit 502585c7555083d4a949c08350306b9ec196779e upstream.

regs_set() and regs_get() are vulnerable to an off-by-1 buffer overrun
if CONFIG_CPU_H8S is set, since this adds an extra entry to
register_offset[] but not to user_regs_struct.

So, iterate over user_regs_struct based on its actual size, not based on
the length of register_offset[].

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

c6x/ptrace: Remove useless PTRACE_SETREGSET implementation

commit fb411b837b587a32046dc4f369acb93a10b1def8 upstream.

gpr_set won't work correctly and can never have been tested, and the
correct behaviour is not clear due to the endianness-dependent task
layout.

So, just remove it.  The core code will now return -EOPNOTSUPPORT when
trying to set NT_PRSTATUS on this architecture until/unless a correct
implementation is supplied.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: Don't clear status bit on irq_unmask

commit a6566710adaa4a7dd5e0d99820ff9c9c30ee5951 upstream.

Clearing the status bit on irq_unmask will discard any pending interrupt
that did arrive after the irq_ack, i.e. while the IRQ handler function
was executing.

Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: init 1st buffer in stats vq

commit fc8653228c8588a120f6b5dad6983b7b61ff669e upstream.

When init_vqs runs, virtio_balloon.stats is either uninitialized or
contains stale values. The host updates its state with garbage data
because it has no way of knowing that this is just a marker buffer
used for signaling.

This patch updates the stats before pushing the initial buffer.

Alternative fixes:
* Push an empty buffer in init_vqs. Not easily done with the current
  virtio implementation and violates the spec "Driver MUST supply the
  same subset of statistics in all buffers submitted to the statsq".
* Push a buffer with invalid tags in init_vqs. Violates the same
  spec clause, plus "invalid tag" is not really defined.

Note: the spec says:
When using the legacy interface, the device SHOULD ignore all values in
the first buffer in the statsq supplied by the driver after device
initialization. Note: Historically, drivers supplied an uninitialized
buffer in the first buffer.

Unfortunately QEMU does not seem to implement the recommendation
even for the legacy interface.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder

commit f843ee6dd019bcece3e74e76ad9df0155655d0df upstream.

Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to
wrapping issues.  To ensure we are correctly ensuring that the two ESN
structures are the same size compare both the overall size as reported
by xfrm_replay_state_esn_len() and the internal length are the same.

CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window

commit 677e806da4d916052585301785d847c3b3e6186a upstream.

When a new xfrm state is created during an XFRM_MSG_NEWSA call we
validate the user supplied replay_esn to ensure that the size is valid
and to ensure that the replay_window size is within the allocated
buffer.  However later it is possible to update this replay_esn via a
XFRM_MSG_NEWAE call.  There we again validate the size of the supplied
buffer matches the existing state and if so inject the contents.  We do
not at this point check that the replay_window is within the allocated
memory.  This leads to out-of-bounds reads and writes triggered by
netlink packets.  This leads to memory corruption and the potential for
priviledge escalation.

We already attempt to validate the incoming replay information in
xfrm_new_ae() via xfrm_replay_verify_len().  This confirms that the user
is not trying to change the size of the replay state buffer which
includes the replay_esn.  It however does not check the replay_window
remains within that buffer.  Add validation of the contained
replay_window.

CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: policy: init locks early

commit c282222a45cb9503cbfbebfdb60491f06ae84b49 upstream.

Dmitry reports following splat:
 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 13059 Comm: syz-executor1 Not tainted 4.10.0-rc7-next-20170207 #1
[..]
 spin_lock_bh include/linux/spinlock.h:304 [inline]
 xfrm_policy_flush+0x32/0x470 net/xfrm/xfrm_policy.c:963
 xfrm_policy_fini+0xbf/0x560 net/xfrm/xfrm_policy.c:3041
 xfrm_net_init+0x79f/0x9e0 net/xfrm/xfrm_policy.c:3091
 ops_init+0x10a/0x530 net/core/net_namespace.c:115
 setup_net+0x2ed/0x690 net/core/net_namespace.c:291
 copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396
 create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
 SYSC_unshare kernel/fork.c:2281 [inline]

Problem is that when we get error during xfrm_net_init we will call
xfrm_policy_fini which will acquire xfrm_policy_lock before it was
initialized.  Just move it around so locks get set up first.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 283bc9f35bbbcb0e9 ("xfrm: Namespacify xfrm state/policy locks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.58

crypto: algif_hash - avoid zero-sized array

commit 6207119444595d287b1e9e83a2066c17209698f3 upstream.

With this reproducer:
  struct sockaddr_alg alg = {
          .salg_family = 0x26,
          .salg_type = "hash",
          .salg_feat = 0xf,
          .salg_mask = 0x5,
          .salg_name = "digest_null",
  };
  int sock, sock2;

  sock = socket(AF_ALG, SOCK_SEQPACKET, 0);
  bind(sock, (struct sockaddr *)&alg, sizeof(alg));
  sock2 = accept(sock, NULL, NULL);
  setsockopt(sock, SOL_ALG, ALG_SET_KEY, "\x9b\xca", 2);
  accept(sock2, NULL, NULL);

==== 8< ======== 8< ======== 8< ======== 8< ====

one can immediatelly see an UBSAN warning:
UBSAN: Undefined behaviour in crypto/algif_hash.c:187:7
variable length array bound value 0 <= 0
CPU: 0 PID: 15949 Comm: syz-executor Tainted: G            E      4.4.30-0-default #1
...
Call Trace:
...
 [<ffffffff81d598fd>] ? __ubsan_handle_vla_bound_not_positive+0x13d/0x188
 [<ffffffff81d597c0>] ? __ubsan_handle_out_of_bounds+0x1bc/0x1bc
 [<ffffffffa0e2204d>] ? hash_accept+0x5bd/0x7d0 [algif_hash]
 [<ffffffffa0e2293f>] ? hash_accept_nokey+0x3f/0x51 [algif_hash]
 [<ffffffffa0e206b0>] ? hash_accept_parent_nokey+0x4a0/0x4a0 [algif_hash]
 [<ffffffff8235c42b>] ? SyS_accept+0x2b/0x40

It is a correct warning, as hash state is propagated to accept as zero,
but creating a zero-length variable array is not allowed in C.

Fix this as proposed by Herbert -- do "?: 1" on that site. No sizeof or
similar happens in the code there, so we just allocate one byte even
though we do not use the array.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net> (maintainer:CRYPTO API)
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: Fix vc attr at deinit

commit 8aac7f34369726d1a158788ae8aff3002d5eb528 upstream.

fbcon can deal with vc_hi_font_mask (the upper 256 chars) and adjust
the vc attrs dynamically when vc_hi_font_mask is changed at
fbcon_init().  When the vc_hi_font_mask is set, it remaps the attrs in
the existing console buffer with one bit shift up (for 9 bits), while
it remaps with one bit shift down (for 8 bits) when the value is
cleared.  It works fine as long as the font gets updated after fbcon
was initialized.

However, we hit a bizarre problem when the console is switched to
another fb driver (typically from vesafb or efifb to drmfb).  At
switching to the new fb driver, we temporarily rebind the console to
the dummy console, then rebind to the new driver.  During the
switching, we leave the modified attrs as is.  Thus, the new fbcon
takes over the old buffer as if it were to contain 8 bits chars
(although the attrs are still shifted for 9 bits), and effectively
this results in the yellow color texts instead of the original white
color, as found in the bugzilla entry below.

An easy fix for this is to re-adjust the attrs before leaving the
fbcon at con_deinit callback.  Since the code to adjust the attrs is
already present in the current fbcon code, in this patch, we simply
factor out the relevant code, and call it from fbcon_deinit().

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000619
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pci: Detach low-level driver during PCI error recovery

From: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>

[ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ]

During a PCI error recovery, like the ones provoked by EEH in the ppc64
platform, all IO to the device must be blocked while the recovery is
completed.  Current 8250_pci implementation only suspends the port
instead of detaching it, which doesn't prevent incoming accesses like
TIOCMGET and TIOCMSET calls from reaching the device.  Those end up
racing with the EEH recovery, crashing it.  Similar races were also
observed when opening the device and when shutting it down during
recovery.

This patch implements a more robust IO blockage for the 8250_pci
recovery by unregistering the port at the beginning of the procedure and
re-adding it afterwards.  Since the port is detached from the uart
layer, we can be sure that no request will make through to the device
during recovery.  This is similar to the solution used by the JSM serial
driver.

I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on
this one over one year ago.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / blacklist: Make Dell Latitude 3350 ethernet work

From: Michael Pobega <mpobega@neverware.com>

[ Upstream commit 708f5dcc21ae9b35f395865fc154b0105baf4de4 ]

The Dell Latitude 3350's ethernet card attempts to use a reserved
IRQ (18), resulting in ACPI being unable to enable the ethernet.

Adding it to acpi_rev_dmi_table[] helps to work around this problem.

Signed-off-by: Michael Pobega <mpobega@neverware.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520

From: Alex Hung <alex.hung@canonical.com>

[ Upstream commit 9523b9bf6dceef6b0215e90b2348cd646597f796 ]

Precision 5520 and 3520 either hang at login and during suspend or reboot.

It turns out that that adding them to acpi_rev_dmi_table[] helps to work
around those issues.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uvcvideo: uvc_scan_fallback() for webcams with broken chain

From: Henrik Ingo <henrik.ingo@avoinelama.fi>

[ Upstream commit e950267ab802c8558f1100eafd4087fd039ad634 ]

Some devices have invalid baSourceID references, causing uvc_scan_chain()
to fail, but if we just take the entities we can find and put them
together in the most sensible chain we can think of, turns out they do
work anyway. Note: This heuristic assumes there is a single chain.

At the time of writing, devices known to have such a broken chain are
  - Acer Integrated Camera (5986:055a)
  - Realtek rtl157a7 (0bda:57a7)

Signed-off-by: Henrik Ingo <henrik.ingo@avoinelama.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/zcrypt: Introduce CEX6 toleration

From: Harald Freudenberger <freude@linux.vnet.ibm.com>

[ Upstream commit b3e8652bcbfa04807e44708d4d0c8cdad39c9215 ]

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: allow WRITE_SAME commands with the SG_IO ioctl

From: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>

[ Upstream commit 25cdb64510644f3e854d502d69c73f21c6df88a9 ]

The WRITE_SAME commands are not present in the blk_default_cmd_filter
write_ok list, and thus are failed with -EPERM when the SG_IO ioctl()
is executed without CAP_SYS_RAWIO capability (e.g., unprivileged users).
[ sg_io() -> blk_fill_sghdr_rq() > blk_verify_command() -> -EPERM ]

The problem can be reproduced with the sg_write_same command

  # sg_write_same --num 1 --xferlen 512 /dev/sda
  #

  # capsh --drop=cap_sys_rawio -- -c \
    'sg_write_same --num 1 --xferlen 512 /dev/sda'
    Write same: pass through os error: Operation not permitted
  #

For comparison, the WRITE_VERIFY command does not observe this problem,
since it is in that list:

  # capsh --drop=cap_sys_rawio -- -c \
    'sg_write_verify --num 1 --ilen 512 --lba 0 /dev/sda'
  #

So, this patch adds the WRITE_SAME commands to the list, in order
for the SG_IO ioctl to finish successfully:

  # capsh --drop=cap_sys_rawio -- -c \
    'sg_write_same --num 1 --xferlen 512 /dev/sda'
  #

That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices
(qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]),
which employs the SG_IO ioctl() and runs as an unprivileged user (libvirt-qemu).

In that scenario, when a filesystem (e.g., ext4) performs its zero-out calls,
which are translated to write-same calls in the guest kernel, and then into
SG_IO ioctls to the host kernel, SCSI I/O errors may be observed in the guest:

  [...] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  [...] sd 0:0:0:0: [sda] tag#0 Sense Key : Aborted Command [current]
  [...] sd 0:0:0:0: [sda] tag#0 Add. Sense: I/O process terminated
  [...] sd 0:0:0:0: [sda] tag#0 CDB: Write Same(10) 41 00 01 04 e0 78 00 00 08 00
  [...] blk_update_request: I/O error, dev sda, sector 17096824

Links:
[1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52
[2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device')

Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Reported-by: Manjunatha H R <manjuhr1@in.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/spapr: Postpone allocation of userspace version of TCE table

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit 39701e56f5f16ea0cf8fc9e8472e645f8de91d23 ]

The iommu_table struct manages a hardware TCE table and a vmalloc'd
table with corresponding userspace addresses. Both are allocated when
the default DMA window is created and this happens when the very first
group is attached to a container.

As we are going to allow the userspace to configure container in one
memory context and pas container fd to another, we have to postpones
such allocations till a container fd is passed to the destination
user process so we would account locked memory limit against the actual
container user constrainsts.

This postpones the it_userspace array allocation till it is used first
time for mapping. The unmapping patch already checks if the array is
allocated.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Do any VF BAR updates before enabling the BARs

From: Gavin Shan <gwshan@linux.vnet.ibm.com>

[ Upstream commit f40ec3c748c6912f6266c56a7f7992de61b255ed ]

Previously we enabled VFs and enable their memory space before calling
pcibios_sriov_enable().  But pcibios_sriov_enable() may update the VF BARs:
for example, on PPC PowerNV we may change them to manage the association of
VFs to PEs.

Because 64-bit BARs cannot be updated atomically, it's unsafe to update
them while they're enabled.  The half-updated state may conflict with other
devices in the system.

Call pcibios_sriov_enable() before enabling the VFs so any BAR updates
happen while the VF BARs are disabled.

[bhelgaas: changelog]
Tested-by: Carol Soto <clsoto@us.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Ignore BAR updates on virtual functions

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 63880b230a4af502c56dde3d4588634c70c66006 ]

VF BARs are read-only zero, so updating VF BARs will not have any effect.
See the SR-IOV spec r1.1, sec 3.4.1.11.

We already ignore these updates because of 70675e0b6a1a ("PCI: Don't try to
restore VF BARs"); this merely restructures it slightly to make it easier
to split updates for standard and SR-IOV BARs.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Update BARs using property bits appropriate for type

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 45d004f4afefdd8d79916ee6d97a9ecd94bb1ffe ]

The BAR property bits (0-3 for memory BARs, 0-1 for I/O BARs) are supposed
to be read-only, but we do save them in res->flags and include them when
updating the BAR.

Mask the I/O property bits with ~PCI_BASE_ADDRESS_IO_MASK (0x3) instead of
PCI_REGION_FLAG_MASK (0xf) to make it obvious that we can't corrupt bits
2-3 of I/O addresses.

Use PCI_ROM_ADDRESS_MASK for ROM BARs.  This means we'll only check the top
21 bits (instead of the 28 bits we used to check) of a ROM BAR to see if
the update was successful.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Don't update VF BARs while VF memory space is enabled

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 546ba9f8f22f71b0202b6ba8967be5cc6dae4e21 ]

If we update a VF BAR while it's enabled, there are two potential problems:

  1) Any driver that's using the VF has a cached BAR value that is stale
     after the update, and

  2) We can't update 64-bit BARs atomically, so the intermediate state
     (new lower dword with old upper dword) may conflict with another
     device, and an access by a driver unrelated to the VF may cause a bus
     error.

Warn about attempts to update VF BARs while they are enabled.  This is a
programming error, so use dev_WARN() to get a backtrace.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 7a6d312b50e63f598f5b5914c4fd21878ac2b595 ]

Remove the assumption that IORESOURCE_ROM_ENABLE == PCI_ROM_ADDRESS_ENABLE.
PCI_ROM_ADDRESS_ENABLE is the ROM enable bit defined by the PCI spec, so if
we're reading or writing a BAR register value, that's what we should use.
IORESOURCE_ROM_ENABLE is a corresponding bit in struct resource flags.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add comments about ROM BAR updating

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 0b457dde3cf8b7c76a60f8e960f21bbd4abdc416 ]

pci_update_resource() updates a hardware BAR so its address matches the
kernel's struct resource UNLESS it's a disabled ROM BAR.  We only update
those when we enable the ROM.

It's not obvious from the code why ROM BARs should be handled specially.
Apparently there are Matrox devices with defective ROM BARs that read as
zero when disabled.  That means that if pci_enable_rom() reads the disabled
BAR, sets PCI_ROM_ADDRESS_ENABLE (without re-inserting the address), and
writes it back, it would enable the ROM at address zero.

Add comments and references to explain why we can't make the code look more
rational.

The code changes are from 755528c860b0 ("Ignore disabled ROM resources at
setup") and 8085ce084c0f ("[PATCH] Fix PCI ROM mapping").

Link: https://lkml.org/lkml/2005/8/30/138
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 [sumits: minor fixup in rom.c for 4.4.y]
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Remove pci_resource_bar() and pci_iov_resource_bar()

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 286c2378aaccc7343ebf17ec6cd86567659caf70 ]

pci_std_update_resource() only deals with standard BARs, so we don't have
to worry about the complications of VF BARs in an SR-IOV capability.

Compute the BAR address inline and remove pci_resource_bar().  That makes
pci_iov_resource_bar() unused, so remove that as well.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Separate VF BAR updates from standard BAR updates

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 6ffa2489c51da77564a0881a73765ea2169f955d ]

Previously pci_update_resource() used the same code path for updating
standard BARs and VF BARs in SR-IOV capabilities.

Split the VF BAR update into a new pci_iov_update_resource() internal
interface, which makes it simpler to compute the BAR address (we can get
rid of pci_resource_bar() and pci_iov_resource_bar()).

This patch:

  - Renames pci_update_resource() to pci_std_update_resource(),
  - Adds pci_iov_update_resource(),
  - Makes pci_update_resource() a wrapper that calls the appropriate one,

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 59107e2f48831daedc46973ce4988605ab066de3 ]

There is a feature in Hyper-V ('Debug-VM --InjectNonMaskableInterrupt')
which injects NMI to the guest. We may want to crash the guest and do kdump
on this NMI by enabling unknown_nmi_panic. To make kdump succeed we need to
allow the kdump kernel to re-establish VMBus connection so it will see
VMBus devices (storage, network,..).

To properly unload VMBus making it possible to start over during kdump we
need to do the following:

 - Send an 'unload' message to the hypervisor. This can be done on any CPU
   so we do this the crashing CPU.

 - Receive the 'unload finished' reply message. WS2012R2 delivers this
   message to the CPU which was used to establish VMBus connection during
   module load and this CPU may differ from the CPU sending 'unload'.

Receiving a VMBus message means the following:

 - There is a per-CPU slot in memory for one message. This slot can in
   theory be accessed by any CPU.

 - We get an interrupt on the CPU when a message was placed into the slot.

 - When we read the message we need to clear the slot and signal the fact
   to the hypervisor. In case there are more messages to this CPU pending
   the hypervisor will deliver the next message. The signaling is done by
   writing to an MSR so this can only be done on the appropriate CPU.

To avoid doing cross-CPU work on crash we have vmbus_wait_for_unload()
function which checks message slots for all CPUs in a loop waiting for the
'unload finished' messages. However, there is an issue which arises when
these conditions are met:

 - We're crashing on a CPU which is different from the one which was used
   to initially contact the hypervisor.

 - The CPU which was used for the initial contact is blocked with interrupts
   disabled and there is a message pending in the message slot.

In this case we won't be able to read the 'unload finished' message on the
crashing CPU. This is reproducible when we receive unknown NMIs on all CPUs
simultaneously: the first CPU entering panic() will proceed to crash and
all other CPUs will stop themselves with interrupts disabled.

The suggested solution is to handle unknown NMIs for Hyper-V guests on the
first CPU which gets them only. This will allow us to rely on VMBus
interrupt handler being able to receive the 'unload finish' message in
case it is delivered to a different CPU.

The issue is not reproducible on WS2016 as Debug-VM delivers NMI to the
boot CPU only, WS2012R2 and earlier Hyper-V versions are affected.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Link: http://lkml.kernel.org/r/20161202100720.28121-1-vkuznets@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: add i211 to i210 PHY workaround

From: Todd Fujinaka <todd.fujinaka@intel.com>

[ Upstream commit 5bc8c230e2a993b49244f9457499f17283da9ec7 ]

i210 and i211 share the same PHY but have different PCI IDs. Don't
forget i211 for any i210 workarounds.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Workaround for igb i210 firmware issue

From: Chris J Arges <christopherarges@gmail.com>

[ Upstream commit 4e684f59d760a2c7c716bb60190783546e2d08a1 ]

Sometimes firmware may not properly initialize I347AT4_PAGE_SELECT causing
the probe of an igb i210 NIC to fail. This patch adds an addition zeroing
of this register during igb_get_phy_id to workaround this issue.

Thanks for Jochen Henneberg for the idea and original patch.

Signed-off-by: Chris J Arges <christopherarges@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: do not re-use pirq number cached in pci device msi msg data

From: Dan Streetman <ddstreet@ieee.org>

[ Upstream commit c74fd80f2f41d05f350bb478151021f88551afe8 ]

Revert the main part of commit:
af42b8d12f8a ("xen: fix MSI setup and teardown for PV on HVM guests")

That commit introduced reading the pci device's msi message data to see
if a pirq was previously configured for the device's msi/msix, and re-use
that pirq.  At the time, that was the correct behavior.  However, a
later change to Qemu caused it to call into the Xen hypervisor to unmap
all pirqs for a pci device, when the pci device disables its MSI/MSIX
vectors; specifically the Qemu commit:
c976437c7dba9c7444fb41df45468968aaa326ad
("qemu-xen: free all the pirqs for msi/msix when driver unload")

Once Qemu added this pirq unmapping, it was no longer correct for the
kernel to re-use the pirq number cached in the pci device msi message
data.  All Qemu releases since 2.1.0 contain the patch that unmaps the
pirqs when the pci device disables its MSI/MSIX vectors.

This bug is causing failures to initialize multiple NVMe controllers
under Xen, because the NVMe driver sets up a single MSIX vector for
each controller (concurrently), and then after using that to talk to
the controller for some configuration data, it disables the single MSIX
vector and re-configures all the MSIX vectors it needs.  So the MSIX
setup code tries to re-use the cached pirq from the first vector
for each controller, but the hypervisor has already given away that
pirq to another controller, and its initialization fails.

This is discussed in more detail at:
https://lists.xen.org/archives/html/xen-devel/2017-01/msg00447.html

Fixes: af42b8d12f8a ("xen: fix MSI setup and teardown for PV on HVM guests")
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: clear _XBF_PAGES from buffers when readahead page

commit 2aa6ba7b5ad3189cc27f14540aa2f57f0ed8df4b upstream.

If we try to allocate memory pages to back an xfs_buf that we're trying
to read, it's possible that we'll be so short on memory that the page
allocation fails.  For a blocking read we'll just wait, but for
readahead we simply dump all the pages we've collected so far.

Unfortunately, after dumping the pages we neglect to clear the
_XBF_PAGES state, which means that the subsequent call to xfs_buf_free
thinks that b_pages still points to pages we own.  It then double-frees
the b_pages pages.

This results in screaming about negative page refcounts from the memory
manager, which xfs oughtn't be triggering.  To reproduce this case,
mount a filesystem where the size of the inodes far outweighs the
availalble memory (a ~500M inode filesystem on a VM with 300MB memory
did the trick here) and run bulkstat in parallel with other memory
eating processes to put a huge load on the system.  The "check summary"
phase of xfs_scrub also works for this purpose.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: Ivan Kozik <ivan@ludios.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbtmc: add missing endpoint sanity check

commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream.

USBTMC devices are required to have a bulk-in and a bulk-out endpoint,
but the driver failed to verify this, something which could lead to the
endpoint addresses being taken from uninitialised memory.

Make sure to zero all private data as part of allocation, and add the
missing endpoint sanity check.

Note that this also addresses a more recently introduced issue, where
the interrupt-in-presence flag would also be uninitialised whenever the
optional interrupt-in endpoint is not present. This in turn could lead
to an interrupt urb being allocated, initialised and submitted based on
uninitialised values.

Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: backport to v4.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: fix dumpit error path RTNL deadlocks

commit ea90e0dc8cecba6359b481e24d9c37160f6f524f upstream.

Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out
to be perfectly accurate - there are various error paths that miss unlock
of the RTNL.

To fix those, change the locking a bit to not be conditional in all those
nl80211_prepare_*_dump() functions, but make those require the RTNL to
start with, and fix the buggy error paths. This also let me use sparse
(by appropriately overriding the rtnl_lock/rtnl_unlock functions) to
validate the changes.

Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix up xfs_swap_extent_forks inline extent handling

commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]
#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs]
#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs]
#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs]
#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs]
#14 [ffff8800a57bbe00] evict at ffffffff811e1b67
#15 [ffff8800a57bbe28] iput at ffffffff811e23a5
#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8
#17 [ffff8800a57bbe88] dput at ffffffff811dd06c
#18 [ffff8800a57bbea8] __fput at ffffffff811c823b
#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e
#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27
#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c
#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp->if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

[nborisov: backported to 4.4]

Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--
 fs/xfs/xfs_bmap_util.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

xfs: don't allow di_size with high bit set

commit ef388e2054feedaeb05399ed654bdb06f385d294 upstream.

The on-disk field di_size is used to set i_size, which is a signed
integer of loff_t.  If the high bit of di_size is set, we'll end up with
a negative i_size, which will cause all sorts of problems.  Since the
VFS won't let us create a file with such length, we should catch them
here in the verifier too.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: don't set weight to IN when OSD is destroyed

commit b581a5854eee4b7851dedb0f8c2ceb54fb902c06 upstream.

Since ceph.git commit 4e28f9e63644 ("osd/OSDMap: clear osd_info,
osd_xinfo on osd deletion"), weight is set to IN when OSD is deleted.
This changes the result of applying an incremental for clients, not
just OSDs.  Because CRUSH computations are obviously affected,
pre-4e28f9e63644 servers disagree with post-4e28f9e63644 clients on
object placement, resulting in misdirected requests.

Mirrors ceph.git commit a6009d1039a55e2c77f431662b3d6cc5a8e8e63f.

Fixes: 930c53286977 ("libceph: apply new_state before new_up_client on incrementals")
Link: http://tracker.ceph.com/issues/19122
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

raid10: increment write counter after bio is split

commit 9b622e2bbcf049c82e2550d35fb54ac205965f50 upstream.

md pending write counter must be incremented after bio is split,
otherwise it gets decremented too many times in end bio callback and
becomes negative.

Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Restore policy min/max limits on CPU online

commit ff010472fb75670cb5c08671e820eeea3af59c87 upstream.

On CPU online the cpufreq core restores the previous governor (or
the previous "policy" setting for ->setpolicy drivers), but it does
not restore the min/max limits at the same time, which is confusing,
inconsistent and real pain for users who set the limits and then
suspend/resume the system (using full suspend), in which case the
limits are reset on all CPUs except for the boot one.

Fix this by making cpufreq_online() restore the limits when an inactive
policy is brought online.

The commit log and patch are inspired from Rafael's earlier work.

Reported-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: sama5d2: add dma properties to UART nodes

commit b1708b72a0959a032cd2eebb77fa9086ea3e0c84 upstream.

The dmas/dma-names properties are added to the UART nodes. Note that additional
properties are needed to enable them at the board level: check bindings for
details.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91: pm: cpu_idle: switch DDR to power-down mode

commit 60b89f1928af80b546b5c3fd8714a62f6f4b8844 upstream.

On some DDR controllers, compatible with the sama5d3 one,
the sequence to enter/exit/re-enter the self-refresh mode adds
more constrains than what is currently written in the at91_idle
driver. An actual access to the DDR chip is needed between exit
and re-enter of this mode which is somehow difficult to implement.
This sequence can completely hang the SoC. It is particularly
experienced on parts which embed a L2 cache if the code run
between IDLE calls fits in it...

Moreover, as the intention is to enter and exit pretty rapidly
from IDLE, the power-down mode is a good candidate.

So now we use power-down instead of self-refresh. As we can
simplify the code for sama5d3 compatible DDR controllers,
we instantiate a new sama5d3_ddr_standby() function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 017b5522d5e3 ("ARM: at91: Add new binding for sama5d3-ddramc")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix NULL pointer dereference in device_to_iommu

commit 5003ae1e735e6bfe4679d9bed6846274f322e77e upstream.

The function device_to_iommu() in the Intel VT-d driver
lacks a NULL-ptr check, resulting in this oops at boot on
some platforms:

 BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab
 IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0
 PGD 0

 [...]

 Call Trace:
   ? find_or_alloc_domain.constprop.29+0x1a/0x300
   ? dw_dma_probe+0x561/0x580 [dw_dmac_core]
   ? __get_valid_domain_for_dev+0x39/0x120
   ? __intel_map_single+0x138/0x180
   ? intel_alloc_coherent+0xb6/0x120
   ? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm]
   ? mutex_lock+0x9/0x30
   ? kernfs_add_one+0xdb/0x130
   ? devres_add+0x19/0x60
   ? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm]
   ? platform_drv_probe+0x30/0x90
   ? driver_probe_device+0x1ed/0x2b0
   ? __driver_attach+0x8f/0xa0
   ? driver_probe_device+0x2b0/0x2b0
   ? bus_for_each_dev+0x55/0x90
   ? bus_add_driver+0x110/0x210
   ? 0xffffffffa11ea000
   ? driver_register+0x52/0xc0
   ? 0xffffffffa11ea000
   ? do_one_initcall+0x32/0x130
   ? free_vmap_area_noflush+0x37/0x70
   ? kmem_cache_alloc+0x88/0xd0
   ? do_init_module+0x51/0x1c4
   ? load_module+0x1ee9/0x2430
   ? show_taint+0x20/0x20
   ? kernel_read_file+0xfd/0x190
   ? SyS_finit_module+0xa3/0xb0
   ? do_syscall_64+0x4a/0xb0
   ? entry_SYSCALL64_slow_path+0x25/0x25
 Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49
 RIP  [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0
  RSP <ffffc90001457a78>
 CR2: 00000000000007ab
 ---[ end trace 16f974b6d58d0aad ]---

Add the missing pointer check.

Fixes: 1c387188c60f53b338c20eee32db055dfe022a9b ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions")
Signed-off-by: Koos Vriezen <koos.vriezen@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/acpi: upload PM state from init-domain to Xen

commit 1914f0cd203c941bba72f9452c8290324f1ef3dc upstream.

This was broken in commit cd979883b9ed ("xen/acpi-processor:
fix enabling interrupts on syscore_resume"). do_suspend (from
xen/manage.c) and thus xen_resume_notifier never get called on
the initial-domain at resume (it is if running as guest.)

The rationale for the breaking change was that upload_pm_data()
potentially does blocking work in syscore_resume(). This patch
addresses the original issue by scheduling upload_pm_data() to
execute in workqueue context.

Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Based-on-patch-by: Konrad Wilk <konrad.wilk@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Do not disable interrupts while waiting for clock

commit e2ebfb2142acefecc2496e71360f50d25726040b upstream.

Disabling interrupts for even a millisecond can cause problems for some
devices. That can happen when sdhci changes clock frequency because it
waits for the clock to become stable under a spin lock.

The spin lock is not necessary here. Anything that is racing with changes
to the I/O state is already broken. The mmc core already provides
synchronization via "claiming" the host.

Although the spin lock probably should be removed from the code paths that
lead to this point, such a patch would touch too much code to be suitable
for stable trees. Consequently, for this patch, just drop the spin lock
while waiting.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: mark inode dirty after converting inline directory

commit b9cf625d6ecde0d372e23ae022feead72b4228a6 upstream.

If ext4_convert_inline_data() was called on a directory with inline
data, the filesystem was left in an inconsistent state (as considered by
e2fsck) because the file size was not increased to cover the new block.
This happened because the inode was not marked dirty after i_disksize
was updated.  Fix this by marking the inode dirty at the end of
ext4_finish_convert_inline_dir().

This bug was probably not noticed before because most users mark the
inode dirty afterwards for other reasons.  But if userspace executed
FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by
'kvm-xfstests -c adv generic/396', then the inode was never marked dirty
after updating i_disksize.

Fixes: 3c47d54170b6a678875566b1b8d6dcf57904e49b
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>