firefly-linux-kernel-4.4.55.git
11 years agoUSB: lpc32xx: ISP1301 needs USB_PHY
Arnd Bergmann [Thu, 25 Apr 2013 17:29:02 +0000 (19:29 +0200)]
USB: lpc32xx: ISP1301 needs USB_PHY

The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.

This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding these build errors:

warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C)
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ftdi_sio: enable two UART ports on ST Microconnect Lite
Adrian Thomasset [Wed, 24 Apr 2013 10:37:35 +0000 (11:37 +0100)]
USB: ftdi_sio: enable two UART ports on ST Microconnect Lite

The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports.
The first two ports are reserved for the JTAG interface.

We enable by default ports 2 and 3 as UARTs (where port 2 is a
conventional RS-232 UART)

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: phy: tegra: don't call into tegra-ehci directly
Arnd Bergmann [Tue, 23 Apr 2013 19:05:40 +0000 (21:05 +0200)]
usb: phy: tegra: don't call into tegra-ehci directly

Both phy-tegra-usb.c and ehci-tegra.c export symbols used by the other one,
which does not work if one of them or both are loadable modules, resulting
in an error like:

drivers/built-in.o: In function `utmi_phy_clk_disable':
drivers/usb/phy/phy-tegra-usb.c:302: undefined reference to `tegra_ehci_set_phcd'
drivers/built-in.o: In function `utmi_phy_clk_enable':
drivers/usb/phy/phy-tegra-usb.c:324: undefined reference to `tegra_ehci_set_phcd'
drivers/built-in.o: In function `utmi_phy_power_on':
drivers/usb/phy/phy-tegra-usb.c:447: undefined reference to `tegra_ehci_set_pts'

This turns the interface into a one-way dependency by letting the tegra ehci
driver pass two function pointers for callbacks that need to be called by
the phy driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: phy: phy core cannot yet be a module
Arnd Bergmann [Tue, 23 Apr 2013 15:54:32 +0000 (17:54 +0200)]
usb: phy: phy core cannot yet be a module

A lot of platform code calls into the usb phy core at the moment, which
does not work if it is built as a loadable module. This will hopefully
change when those platforms are all converted to DT based probing,
but for now, the easiest solution is to change it from "tristate"
to "bool".

This solves at least these ARM allmodconfig build errors:

arch/arm/mach-imx/built-in.o: In function `imx_otg_ulpi_create':
arch/arm/mach-imx/ulpi.c:117: undefined reference to `otg_ulpi_create'
arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys':
arch/arm/mach-omap2/usb-host.c:652: undefined reference to `usb_bind_phy'
arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init':
arch/arm/mach-omap2/board-2430sdp.c:236: undefined reference to `usb_bind_phy'
arch/arm/mach-omap2/built-in.o: In function `omap3_beagle_init':
arch/arm/mach-omap2/board-omap3beagle.c:554: undefined reference to `usb_bind_phy'
arch/arm/mach-omap2/built-in.o: In function `devkit8000_init':
arch/arm/mach-omap2/board-devkit8000.c:596: undefined reference to `usb_bind_phy'
arch/arm/mach-omap2/built-in.o: In function `omap_ldp_init':
arch/arm/mach-omap2/board-ldp.c:379: undefined reference to `usb_bind_phy'
drivers/built-in.o: In function `ab8500_charger_probe':
drivers/power/ab8500_charger.c:3629: undefined reference to `usb_get_phy'
drivers/power/ab8500_charger.c:3706: undefined reference to `usb_put_phy'
drivers/built-in.o: In function `ab8500_charger_remove':
drivers/power/ab8500_charger.c:3411: undefined reference to `usb_put_phy'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: Fix initconst in ehci driver
Andi Kleen [Mon, 22 Apr 2013 16:44:56 +0000 (09:44 -0700)]
USB: Fix initconst in ehci driver

Fix some of the initconst markings in the ehci driver(s).

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb-storage: CY7C68300A chips do not support Cypress ATACB
Tormod Volden [Sat, 20 Apr 2013 12:24:04 +0000 (14:24 +0200)]
usb-storage: CY7C68300A chips do not support Cypress ATACB

Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the
B and C variants (EZ-USB AT2LP) support the ATA Command Block
functionality, according to the data sheets. The A variant (EZ-USB AT2)
locks up if ATACB is attempted, until a typical 30 seconds timeout runs
out and a USB reset is performed.

https://bugs.launchpad.net/bugs/428469

It seems that one way to spot a CY7C68300A (at least where the card
manufacturer left Cypress' EEPROM default vaules, against Cypress'
recommendations) is to look at the USB string descriptor indices.

A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf
B http://www.farnell.com/datasheets/43456.pdf
C http://www.cypress.com/?rID=14189

Note that a CY7C68300B/C chip appears as CY7C68300A if it is running
in Backward Compatibility Mode, and if ATACB would be supported in this
case there is anyway no way to tell which chip it really is.

For 5 years my external USB drive has been locking up for half a minute
when plugged in and ata_id is run by udev, or anytime hdparm or similar
is run on it.

Finally looking at the /correct/ datasheet I think I found the reason. I
am aware the quirk in this patch is a bit hacky, but the hardware
manufacturers haven't made it easy for us.

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: serial: option: Added support Olivetti Olicard 145
Filippo Turato [Sat, 20 Apr 2013 13:04:08 +0000 (15:04 +0200)]
USB: serial: option: Added support Olivetti Olicard 145

This adds PID for Olivetti Olicard 145 in option.c

Signed-off-by: Filippo Turato <nnj7585@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ftdi_sio: correct ST Micro Connect Lite PIDs
Adrian Thomasset [Tue, 23 Apr 2013 11:46:29 +0000 (12:46 +0100)]
USB: ftdi_sio: correct ST Micro Connect Lite PIDs

The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB
UART FTDI chip. It is also possible to drive STM reference targets
populated with an on-board JTAG debugger based on the FT2232H chip with
the same STMicroelectronics tools.

For this reason, the ST Micro Connect Lite PIDs should be
ST_STMCLT_2232_PID: 0x3746
ST_STMCLT_4232_PID: 0x3747

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoMerge tag 'usb-for-v3.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Tue, 23 Apr 2013 16:14:09 +0000 (09:14 -0700)]
Merge tag 'usb-for-v3.10-part2' of git://git./linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: urgent fixes for v3.10 merge window

Here are some late urgent fixes for v3.10 merge window.

All of these errors were introduced by recent commits
which are in linux-next.

f_obex, multi and cdc2 gadget drivers have learned to
return a proper error code when something goes wrong.

usb_bind_phy() was mistakenly placed into .init.text
section which caused Section mismatch warnings and undefined
reference compile errors.

f_source_sink had a copy-paste error which is now corrected.

g_zero got a memory leak plugged.

Two defconfigs got fixed to enable the newly introduced
CONFIG_USB_PHY.

11 years agoARM: mxs_defconfig: add CONFIG_USB_PHY
Shawn Guo [Sun, 24 Mar 2013 14:06:05 +0000 (22:06 +0800)]
ARM: mxs_defconfig: add CONFIG_USB_PHY

Commit edc7cb2 (usb: phy: make it a menuconfig) makes USB_MXS_PHY
be a sub-item of menuconfig symbol USB_PHY.  This change gets the
selection of CONFIG_USB_MXS_PHY in mxs_defconfig lost.  Hence the
boot stops at the point below.

  [    1.600867] ci_hdrc ci_hdrc.0: doesn't support gadget
  [    1.606282] ci_hdrc ci_hdrc.0: EHCI Host Controller
  [    1.613522] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1

Add CONFIG_USB_PHY to have the CONFIG_USB_MXS_PHY selection back to
work.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agoARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
Shawn Guo [Sun, 24 Mar 2013 14:06:04 +0000 (22:06 +0800)]
ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY

Commit edc7cb2 (usb: phy: make it a menuconfig) makes USB_MXS_PHY
be a sub-item of menuconfig symbol USB_PHY.  This change gets the
selection of CONFIG_USB_MXS_PHY in imx_v6_v7_defconfig lost.  Hence the
boot stops at the point below.

  ci_hdrc ci_hdrc.0: doesn't support gadget
  ci_hdrc ci_hdrc.0: EHCI Host Controller
  ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1

Add CONFIG_USB_PHY to have the CONFIG_USB_MXS_PHY selection back to
work.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agousb: phy: remove exported function from __init section
Denis Efremov [Thu, 18 Apr 2013 13:13:31 +0000 (17:13 +0400)]
usb: phy: remove exported function from __init section

The symbol usb_bind_phy is exported and annotated __init.
It looks like section mismatch. Fix by removing the
__init annotation of usb_bind_phy.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agousb: gadget: zero: put function instances on unbind
Andrzej Pietrasiewicz [Thu, 18 Apr 2013 12:43:26 +0000 (14:43 +0200)]
usb: gadget: zero: put function instances on unbind

If function instances are not put on gadget's unbind, their implementation
module's refcount is nonzero and it is impossible to unload them.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agousb: gadget: f_sourcesink.c: correct a copy-paste misnomer
Andrzej Pietrasiewicz [Thu, 18 Apr 2013 12:43:25 +0000 (14:43 +0200)]
usb: gadget: f_sourcesink.c: correct a copy-paste misnomer

acm was the first function to be converted and it seems that its
code served as a base for converting f_sourcesink to the new function
interface. source_sink has nothing to do with acm, though.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agousb: gadget: cdc2: fix error return code in cdc_do_config()
Wei Yongjun [Sat, 6 Apr 2013 09:25:21 +0000 (17:25 +0800)]
usb: gadget: cdc2: fix error return code in cdc_do_config()

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Introduced by commit 29a664 (usb: gadget: cdc2: use function
framework for ACM)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agousb: gadget: multi: fix error return code in rndis_do_config()
Wei Yongjun [Sat, 6 Apr 2013 09:23:22 +0000 (17:23 +0800)]
usb: gadget: multi: fix error return code in rndis_do_config()

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Introduced by commit 59835a (usb: gadget: multi: use
function framework for ACM.)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agousb: gadget: f_obex: fix error return code in obex_bind()
Wei Yongjun [Sat, 6 Apr 2013 04:39:49 +0000 (12:39 +0800)]
usb: gadget: f_obex: fix error return code in obex_bind()

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years agoUSB: storage: convert to use module_usb_driver()
Greg Kroah-Hartman [Fri, 19 Apr 2013 18:50:10 +0000 (11:50 -0700)]
USB: storage: convert to use module_usb_driver()

Now that Joe cleaned up the init/exit functions, we can just get rid of
them entirely and use the proper macro that almost all other USB drivers
now use.

Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: storage: Convert US_DEBUGP to usb_stor_dbg
Joe Perches [Fri, 19 Apr 2013 18:44:00 +0000 (11:44 -0700)]
usb: storage: Convert US_DEBUGP to usb_stor_dbg

Use a more current logging style with dev_printk
where possible.

o Convert uses of US_DEBUGP to usb_stor_dbg
o Add "struct us_data *" to usb_stor_dbg uses
o usb_stor_dbg now uses struct device */dev_vprint_emit
o Removed embedded function names
o Coalesce formats
o Remove trailing whitespace
o Remove useless OOM messages
o Remove useless function entry/exit logging
o Convert some US_DEBUGP uses to dev_info and dev_dbg

Object size is slightly reduced when debugging
is enabled, slightly increased with no debugging
because some initialization and removal messages
are now always emitted.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ti_usb_3410_5052: kill custom closing_wait
Johan Hovold [Thu, 18 Apr 2013 15:33:23 +0000 (17:33 +0200)]
USB: ti_usb_3410_5052: kill custom closing_wait

Kill custom closing_wait implementation and let the tty-layer handle it
instead.

Note that the port drain-delay is set to three characters to keep the
20ms delay after wait_until_sent at low baudrates (1200 baud) during close.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ti_usb_3410_5052: remove redundant drain from break_ctl
Johan Hovold [Thu, 18 Apr 2013 15:33:22 +0000 (17:33 +0200)]
USB: ti_usb_3410_5052: remove redundant drain from break_ctl

Remove redundant drain, which has already been handled by the tty-layer,
from break_ctl.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer
Johan Hovold [Thu, 18 Apr 2013 15:33:21 +0000 (17:33 +0200)]
USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer

Query hardware-buffer status in chars_in_buffer should the write fifo be
empty.

This is needed to make the tty layer wait for hardware buffers to drain
on close.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ti_usb_3410_5052: remove lsr from port data
Johan Hovold [Thu, 18 Apr 2013 15:33:20 +0000 (17:33 +0200)]
USB: ti_usb_3410_5052: remove lsr from port data

The line status register is only polled so let's not keep a possibly
outdated value in the port data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ti_usb_3410_5052: move write-fifo flushing to close
Johan Hovold [Thu, 18 Apr 2013 15:33:19 +0000 (17:33 +0200)]
USB: ti_usb_3410_5052: move write-fifo flushing to close

Move write-fifo flushing from ti_drain to close where it belongs.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: io_ti: remove redundant wait_until_sent
Johan Hovold [Thu, 18 Apr 2013 15:33:18 +0000 (17:33 +0200)]
USB: io_ti: remove redundant wait_until_sent

Remove redundant wait_until_sent, which has already been handled by the
tty-layer, from break_ctl.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: io_ti: fix TIOCGSERIAL
Johan Hovold [Thu, 18 Apr 2013 15:33:17 +0000 (17:33 +0200)]
USB: io_ti: fix TIOCGSERIAL

Fix regression introduced by commit f40d78155 ("USB: io_ti: kill custom
closing_wait implementation") which made TIOCGSERIAL return the wrong
value for closing_wait.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: usbtmc: remove unnecessary memory allocation
Ming Lei [Thu, 18 Apr 2013 04:17:38 +0000 (12:17 +0800)]
USB: usbtmc: remove unnecessary memory allocation

Inside usbtmc_ioctl_clear_out_halt()/usbtmc_ioctl_clear_in_halt(),
usb_clear_halt() needn't any buffer to pass in, so remove the
unnecessary memory allocation.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousbatm: fix potential NULL pointer dereference
Wei Yongjun [Fri, 19 Apr 2013 02:18:12 +0000 (10:18 +0800)]
usbatm: fix potential NULL pointer dereference

The dereference to 'instance' in the debug code should be moved
below the NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: storage: Fix link error
Joe Perches [Thu, 18 Apr 2013 21:17:14 +0000 (14:17 -0700)]
usb: storage: Fix link error

Fix allmodconfig link error introduced by commit 75b9130e8a
("usb: storage: Add usb_stor_dbg, reduce object size")

Export the symbol usb_stor_dbg.
Add export.h

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: symbolserial: move private-data allocation to port_probe
Johan Hovold [Tue, 16 Apr 2013 16:01:30 +0000 (18:01 +0200)]
USB: symbolserial: move private-data allocation to port_probe

Allocate port-private data in port-probe rather than in attach.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: symbolserial: remove unused private data
Johan Hovold [Tue, 16 Apr 2013 16:01:29 +0000 (18:01 +0200)]
USB: symbolserial: remove unused private data

Use port device for debug messages in interrupt-urb callback and remove
unused private data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: symbolserial: use port interrupt-in urb
Johan Hovold [Tue, 16 Apr 2013 16:01:28 +0000 (18:01 +0200)]
USB: symbolserial: use port interrupt-in urb

Use the port interrupt-in urb rather managing a private one.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: mct_u232: clean up read implementation
Johan Hovold [Tue, 16 Apr 2013 16:01:27 +0000 (18:01 +0200)]
USB: mct_u232: clean up read implementation

The device uses the second interrupt-in endpoint of the interface for
reading. Stop abusing the port read urb and store a pointer to the
second interrupt-in urb as port-private data instead.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: kobil_sct: use port interrupt-out urb
Johan Hovold [Tue, 16 Apr 2013 16:01:26 +0000 (18:01 +0200)]
USB: kobil_sct: use port interrupt-out urb

Use the port interrupt-out urb rather than abusing the port write_urb
pointer and allocating a new urb at every open (but the first...).

Note that the write_urb abuse would have led to a double free should
there ever be interfaces with a bulk-out endpoint.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: kobil_sct: remove unused endpoint address
Johan Hovold [Tue, 16 Apr 2013 16:01:25 +0000 (18:01 +0200)]
USB: kobil_sct: remove unused endpoint address

Remove unused interrupt-in endpoint address from private data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: kobil_sct: fix broken debug code
Johan Hovold [Tue, 16 Apr 2013 16:01:24 +0000 (18:01 +0200)]
USB: kobil_sct: fix broken debug code

Replace broken and commented-out debug code with usb_serial_debug_data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: omninet: switch to generic read implementation
Johan Hovold [Tue, 16 Apr 2013 16:01:23 +0000 (18:01 +0200)]
USB: omninet: switch to generic read implementation

Switch to the more efficient generic read implementation.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: omninet: refactor read-urb processing
Johan Hovold [Tue, 16 Apr 2013 16:01:22 +0000 (18:01 +0200)]
USB: omninet: refactor read-urb processing

Refactor read-urb processing, and add sanity checks on header and data
lengths.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: omninet: clean up protocol defines
Johan Hovold [Tue, 16 Apr 2013 16:01:21 +0000 (18:01 +0200)]
USB: omninet: clean up protocol defines

Remove redundant data-offset define, which was really just the header
length.

Add payload-size define and use the bulk-out size define for the actual
bulk-out size.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: omninet: clean up protocol description
Johan Hovold [Tue, 16 Apr 2013 16:01:20 +0000 (18:01 +0200)]
USB: omninet: clean up protocol description

Clean up and fix typos in protocol comment.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: omninet: use kzalloc for private data
Johan Hovold [Tue, 16 Apr 2013 16:01:19 +0000 (18:01 +0200)]
USB: omninet: use kzalloc for private data

Make sure the port private data, which contains the write sequence
number, is cleared at allocation.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ehci-omap: Improve PHY error handling
Roger Quadros [Wed, 17 Apr 2013 08:24:25 +0000 (11:24 +0300)]
USB: ehci-omap: Improve PHY error handling

As the USB PHY layer never returns NULL we don't need
to check for that condition.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: ehci-omap: Don't select any PHY driver
Roger Quadros [Mon, 15 Apr 2013 11:50:34 +0000 (14:50 +0300)]
USB: ehci-omap: Don't select any PHY driver

Don't select NOP_USB_XCEIV. Instead, board config
must select USB_PHY and the appropriate PHY driver.

Also add a hint in Kconfig so that users enabling
this driver manually enable the right PHY drivers as well.

Gets rid of the below warnings when USB_EHCI_HCD_OMAP
is enabled.

warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)
warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
Hans de Goede [Tue, 16 Apr 2013 09:08:33 +0000 (11:08 +0200)]
usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep

When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip,
which for a request with USB_RECIP_ENDPOINT tries to map this to an interface
to see if this interface is claimed, except for ctrl-requests with a type of
USB_TYPE_VENDOR.

When trying to use this device: http://www.akaipro.com/eiepro
redirected to a Windows vm running on qemu on top of Linux.

The windows driver makes a ctrl-req with USB_TYPE_CLASS and
USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to
the interface fails since ep 0 is the ctrl endpoint and thus never is
part of an interface.

This patch fixes this ctrl-req failing by skipping the checkintf call for
USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint.

Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl>
Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: storage: Add usb_stor_dbg, reduce object size
Joe Perches [Wed, 17 Apr 2013 05:44:07 +0000 (22:44 -0700)]
usb: storage: Add usb_stor_dbg, reduce object size

Reduce the size of the objects by consolidating
the duplicated USB_STORAGE into a single function.

Add function usb_stor_dbg to emit debugging messages.
Always validate the format and arguments.
Reduce the number of uses of CONFIG_USB_STORAGE_DEBUG.

Reduces size of objects ~7KB when CONFIG_USB_STORAGE_DEBUG
is set.

$ size drivers/usb/storage/built-in.o*
   text    data     bss     dec     hex filename
 140133   55296   70312  265741   40e0d drivers/usb/storage/built-in.o.new
 147494   55248   70296  273038   42a8e drivers/usb/storage/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: remove redundant tdi_reset
Shengzhou Liu [Wed, 17 Apr 2013 10:03:46 +0000 (18:03 +0800)]
usb: remove redundant tdi_reset

We remove the redundant tdi_reset in ehci_setup since there
is already it in ehci_reset.
It was observed that the duplicated tdi_reset was causing
the PHY_CLK_VALID bit unstable.

Reported-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org> # 3.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: exynos: do not include plat/usb-phy.h
Arnd Bergmann [Thu, 11 Apr 2013 20:49:39 +0000 (22:49 +0200)]
usb: exynos: do not include plat/usb-phy.h

The definitions have moved to include/linux/usb/samsung-usb-phy.h,
and plat/usb-phy.h is unavailable from drivers in a multiplatform
configuration.

Also fix up the plat/usb-phy.h header file to use the definitions
from the new header instead of providing a separate copy.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: ohci-exynos: skip phy setup for Exynos5440 based platforms
Thomas Abraham [Thu, 11 Apr 2013 11:42:30 +0000 (17:12 +0530)]
usb: ohci-exynos: skip phy setup for Exynos5440 based platforms

Exynos5440 does not require any explict USB phy configuration. So skip
the USB phy configuration for Exynos5440 based platforms.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: serial: wishbone-serial: fix up minor sparse warning
Greg Kroah-Hartman [Thu, 11 Apr 2013 15:45:34 +0000 (08:45 -0700)]
USB: serial: wishbone-serial: fix up minor sparse warning

This fixes a sparse warning where we should be using NULL instead of 0

Cc: Wesley W. Terpstra <w.terpstra@gsi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb-serial: add support for USB Wishbone-serial adapters
Wesley W. Terpstra [Thu, 11 Apr 2013 13:08:20 +0000 (15:08 +0200)]
usb-serial: add support for USB Wishbone-serial adapters

Wishbone is an open hardware SoC bus commonly used in FPGA
designs. Bus access can be serialized using the Etherbone
protocol <http://www.ohwr.org/projects/etherbone-core>.

This driver is intended to be used with devices which attach
their internal Wishbone bus to a USB serial interface using
the Etherbone protocol. A userspace library is required to
speak the protocol made available by this driver as ttyUSBx.

Signed-off-by: Wesley W. Terpstra <w.terpstra@gsi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD block
Florian Fainelli [Tue, 9 Apr 2013 12:29:29 +0000 (14:29 +0200)]
USB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD block

This patch encloses all symbols depending on USB_XHCI_HCD within an if
USB_XHCI_HCD / endif block.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD block
Florian Fainelli [Tue, 9 Apr 2013 12:29:28 +0000 (14:29 +0200)]
USB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD block

This patch removes the various depends on USB_OHCI_HCD from the OHCI HCD
drivers and enclose them within an if USB_OHCI_HCD / endif block. The
Octeon OHCI HCD driver has been moved around to remain in this block.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: enclose EHCI HCD drivers within an if USB_EHCI_HCD block
Florian Fainelli [Tue, 9 Apr 2013 12:29:27 +0000 (14:29 +0200)]
USB: enclose EHCI HCD drivers within an if USB_EHCI_HCD block

Thist patch removes the depends on USB_EHCI_HCD that the various USB
EHCI HCD drivers use and encloses every driver within an if USB_EHCI_HCD
/ endif block. The EHCI HCD platform and Octeon drivers have been moved
around to remain enclosed within this block.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbol
Florian Fainelli [Tue, 9 Apr 2013 12:29:26 +0000 (14:29 +0200)]
USB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbol

Just like the OHCI counter part we just can remove the architecture
specific symbols which prevent these configuration symbols from being
selected by platforms/architectures requiring it. The original
implementation did not scale at all since it required each and every
single architecture to be added for these configuration symbols to be
selected. Now it is up to the EHCI driver and/or platform to select
these configuration symbols accordingly.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: regroup all depends on USB within an if USB block
Florian Fainelli [Tue, 9 Apr 2013 12:29:25 +0000 (14:29 +0200)]
USB: regroup all depends on USB within an if USB block

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: option: add a D-Link DWM-156 variant
Bjørn Mork [Tue, 9 Apr 2013 09:26:02 +0000 (11:26 +0200)]
USB: option: add a D-Link DWM-156 variant

Adding support for a Mediatek based device labelled as
D-Link Model: DWM-156, H/W Ver: A7

Also adding two other device IDs found in the Debian(!)
packages included on the embedded device driver CD.

This is a composite MBIM + serial ports + card reader device:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d01 Rev= 3.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-156
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: ehci-s5p: fix: Fix null pointer dereferencing
Vivek Gautam [Tue, 9 Apr 2013 13:12:11 +0000 (18:42 +0530)]
usb: ehci-s5p: fix: Fix null pointer dereferencing

7edb3da: (USB: EHCI: make ehci-s5p a separate driver)
raised an issue with ehci-s5p's driver data.
Now that 's5p_ehci_hcd' doesn't maintain pointer to 'usb_hcd'
and s5p_ehci is nothing but a pointer to hcd->priv;
add hcd to the driver data rather than s5p_ehci.

This fixes issues with null pointer dereferencing in
s5p_ehci_shutdown(), s5p_ehci_suspend(), s5p_ehci_resume().

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
CC: Manjunath Goudar <manjunath.goudar@linaro.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Jingoo Han <jg1.han@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoMerge tag 'for-usb-next-2012-04-08' of git://git.kernel.org/pub/scm/linux/kernel...
Greg Kroah-Hartman [Mon, 8 Apr 2013 23:40:19 +0000 (16:40 -0700)]
Merge tag 'for-usb-next-2012-04-08' of git://git./linux/kernel/git/sarah/xhci into usb-next

Sarah writes:

xHCI misc cleanup patches for 3.10

Hi Greg,

Here's three cleanup patches for 3.10.  Nothing big here, just some debugging
output changes, a macro rename, and a math macro change that should have no
behavioral effects.

Tested on the Intel Panther Point xHCI host, with USB storage and mouse, with
xHCI debugging turned on.  I don't have the TI host that causes the debugging
output changes to trigger.

Sarah Sharp

11 years agoUSB: EHCI: make ehci-msm a separate driver
Manjunath Goudar [Tue, 2 Apr 2013 16:24:03 +0000 (18:24 +0200)]
USB: EHCI: make ehci-msm a separate driver

Separate the  Qualcomm QSD/MSM on-chip host controller driver from
ehci-hcd host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Qualcomm QSD/MSM
can be booted with a multi-platform kernel, which is not expected before
3.11.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the msm bus glue.

In V5 (arnd):
 - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls

In V3:
 - Detailed commit message added here describing why this patch is required.
 - Arranged  #include's in alphabetical order.
 - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver
   structure initialization instead of "msm-ehci", which was the reason
   why it broke in EHCI USB testing

In V2:
Tegra patch related changes removed from this patch.

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: EHCI: make ehci-atmel a separate driver
Manjunath Goudar [Tue, 2 Apr 2013 16:24:02 +0000 (18:24 +0200)]
USB: EHCI: make ehci-atmel a separate driver

Separate the Atmel host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Atmel can be
booted with a multi-platform kernel. This is currently planned for
Linux-3.11.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the Atmel bus glue.

In V4 (arnd):
 - reordered #include statements.
 - removed call to ehci_shutdown and the corresponding export

In V3:
 - Detailed commit message added here about why this patch is required.
 - Replaced hcd_name string "ehci-atmel" to "atmel-ehci".
 - Inserted blank line in the Makefile to separate the EHCI drivers from
   the following non-EHCI drivers.
 - Exported ehci_shutdown symbol as it is needed by the Atmel driver.
 - Eliminated ehci_atmel_setup routine because hcd registers
   can be directly set in the ehci_atmel_drv_probe function.

In V2:
  Resolved below compiler error.
  drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove':
  drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown'

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: EHCI: make ehci-s5p a separate driver
Manjunath Goudar [Tue, 2 Apr 2013 16:24:01 +0000 (18:24 +0200)]
USB: EHCI: make ehci-s5p a separate driver

Separate the  Samsung S5P/EXYNOS host controller driver from ehci-hcd
host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before S5P/EXYNOS can
be booted with a multi-platform kernel. We currently expect those
to get merged for 3.10.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the s5p bus glue.

In V4 (arnd)
 - revert some of the pointless changes.
 - fix allocation of s5p specific data structure.

In V3:
 - Detailed commit message added here, why this patch is required.
 - MODULE_LICENSE is GPL v2.
 - Added .extra_priv_size to eliminate the separate allocation of
   the s5p_ehci_hcd structure and removed .reset function pointer
   initialization.
 - Arranged  #include's in alphabetical order.
 - After using extra_priv_size initialization, struct usb_hcd *hcd
   is redundant and can be removed from the probe function.
 - Eliminated s5p_ehci_phy_enable,contents of statements moved
   into the s5p_ehci_probe
 - Eliminated s5p_ehci_phy_disable, contents of statements moved into
   the s5p_ehci_remove.

In V2:
 - Tegra patch related changes removed from this patch.

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: EHCI: make ehci-spear a separate driver
Manjunath Goudar [Tue, 2 Apr 2013 16:24:00 +0000 (18:24 +0200)]
USB: EHCI: make ehci-spear a separate driver

Separate the SPEAr host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before SPEAr can be
booted with a multi-platform kernel, but they are queued in the
arm-soc tree for 3.10.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the SPEAr bus glue.

In V4 (arnd):
 - renamed all 'struct spear_ehci' pointers from 'ehci' to the
   less ambiguous 'sehci'.
 - folded trivial spear_start_ehci/spear_stop_ehci functions into
   callers.
 - brought back initialization of ehci->caps.

In V3:
 - Detailed commit message added here about why this patch is required.
 - Eliminated ehci_spear_setup routine because hcd registers can
   be directly set in the spear_ehci_hcd_drv_probe function.
 - spear_overrides struct initialized.
 - Converted to using .extra_priv_size for allocating spear_ehci,
   and updated all users of that structure.
 - to_spear_ehci() macro modified for spear_ehci.

In V2:
 - Replaced spear as SPEAr everywhere, leaving functions/variables/config options.

Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: spear-devel@list.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: EHCI: make ehci-orion a separate driver
Manjunath Goudar [Tue, 2 Apr 2013 16:23:59 +0000 (18:23 +0200)]
USB: EHCI: make ehci-orion a separate driver

Separate the Orion host controller driver from ehci-hcd host
code into its own driver module because of following reason.

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like

drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.

An earlier version of this patch was included in 3.9 but caused
a regression there, which has subsequently been fixed.

While we are here, use the opportunity to disabiguate the two
Marvell EHCI controller implementations in Kconfig.

In V4 (arnd):
- Improve Kconfig text

In V3:
- More detail provided in commit message regarding this patch.
- Replaced hcd_name string "ehci-orion" into "orion-ehci".
- MODULE_LICENSE is GPL v2.
- In ehci_init_driver calling second argument passed  as NULL instead of
  ehci_orion_overrides because ehci_orion_overrides is removed.

In V2:
- Tegra patch related changes removed from this patch.

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: add ftdi_sio USB ID for GDM Boost V1.x
Stefani Seibold [Sun, 7 Apr 2013 10:08:55 +0000 (12:08 +0200)]
USB: add ftdi_sio USB ID for GDM Boost V1.x

This patch add a missing usb device id for the GDMBoost V1.x device

The patch is against 3.9-rc5

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb, gadget: use appropriate warning accessors
David Rientjes [Sun, 7 Apr 2013 21:11:47 +0000 (14:11 -0700)]
usb, gadget: use appropriate warning accessors

Use the appropriate WARN() and WARN_ON() accessors to avoid a build error
when CONFIG_BUG=n:

drivers/usb/gadget/configfs.c: In function 'config_usb_cfg_unlink':
drivers/usb/gadget/configfs.c:442:2: error: implicit declaration of function '__WARN_printf'
drivers/usb/gadget/configfs.c: In function 'configfs_do_nothing':
drivers/usb/gadget/configfs.c:733:2: error: implicit declaration of function '__WARN'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: fix an incorrect table index in comment
Huang Rui [Mon, 8 Apr 2013 04:20:49 +0000 (12:20 +0800)]
USB: fix an incorrect table index in comment

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoxhci - clarify compliance mode debug messages
Tony Camuso [Fri, 5 Apr 2013 18:27:07 +0000 (14:27 -0400)]
xhci - clarify compliance mode debug messages

There are no functional changes in this patch. However, because the
compliance mode timer can be deleted in more than one function, it
seemed expedient to include the function name in the debug strings.

Also limited the use of capitals to the first word in the compliance
mode debug messages, except after a function name where all words
start with lower case, in keeping with the style prevalent elsewhere
in xhci.c.

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
11 years agoMerge 3.9-rc6 into usb-next
Greg Kroah-Hartman [Mon, 8 Apr 2013 15:36:40 +0000 (08:36 -0700)]
Merge 3.9-rc6 into usb-next

We want the fixes here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoLinux 3.9-rc6
Linus Torvalds [Mon, 8 Apr 2013 03:49:54 +0000 (20:49 -0700)]
Linux 3.9-rc6

11 years agoMerge git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sun, 7 Apr 2013 20:01:25 +0000 (13:01 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fix from Gleb Natapov:
 "Bugfix for the regression introduced by commit c300aa64ddf5"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Allow cross page reads and writes from cached translations.

11 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 7 Apr 2013 19:59:55 +0000 (12:59 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Peter Anvin:
 "Two quite small fixes: one a build problem, and the other fixes
  seccomp filters on x32."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix rebuild with EFI_STUB enabled
  x86: remove the x32 syscall bitmask from syscall_get_nr()

11 years agoalpha: irq: remove deprecated use of IRQF_DISABLED
Will Deacon [Sun, 7 Apr 2013 09:36:12 +0000 (21:36 +1200)]
alpha: irq: remove deprecated use of IRQF_DISABLED

Interrupt handlers are always invoked with interrupts disabled, so
remove all uses of the deprecated IRQF_DISABLED flag.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoalpha: irq: run all handlers with interrupts disabled
Will Deacon [Sun, 7 Apr 2013 09:36:11 +0000 (21:36 +1200)]
alpha: irq: run all handlers with interrupts disabled

Linux has expected that interrupt handlers are executed with local
interrupts disabled for a while now, so ensure that this is the case on
Alpha even for non-device interrupts such as IPIs.

Without this patch, secondary boot results in the following backtrace:

  warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0()
  trace:
    __local_bh_enable+0xb8/0xd0
    irq_enter+0x74/0xa0
    scheduler_ipi+0x50/0x100
    handle_ipi+0x84/0x260
    do_entint+0x1ac/0x2e0
    irq_exit+0x60/0xa0
    handle_irq+0x98/0x100
    do_entint+0x2c8/0x2e0
    ret_from_sys_call+0x0/0x10
    load_balance+0x3e4/0x870
    cpu_idle+0x24/0x80
    rcu_eqs_enter_common.isra.38+0x0/0x120
    cpu_idle+0x40/0x80
    rest_init+0xc0/0xe0
    _stext+0x1c/0x20

A similar dump occurs if you try to reboot using magic-sysrq.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoalpha: makefile: don't enforce small data model for kernel builds
Will Deacon [Sun, 7 Apr 2013 09:36:10 +0000 (21:36 +1200)]
alpha: makefile: don't enforce small data model for kernel builds

Due to all of the goodness being packed into today's kernels, the
resulting image isn't as slim as it once was.

In light of this, don't pass -msmall-data to gcc, which otherwise results
in link failures due to impossible relocations when compiling anything but
the most trivial configurations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Thorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoalpha: Add irongate_io to PCI bus resources
Jay Estabrook [Sun, 7 Apr 2013 09:36:09 +0000 (21:36 +1200)]
alpha: Add irongate_io to PCI bus resources

Fixes a NULL pointer dereference at boot on UP1500.

Cc: stable@vger.kernel.org
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoKVM: Allow cross page reads and writes from cached translations.
Andrew Honig [Fri, 29 Mar 2013 16:35:21 +0000 (09:35 -0700)]
KVM: Allow cross page reads and writes from cached translations.

This patch adds support for kvm_gfn_to_hva_cache_init functions for
reads and writes that will cross a page.  If the range falls within
the same memslot, then this will be a fast operation.  If the range
is split between two memslots, then the slower kvm_read_guest and
kvm_write_guest are used.

Tested: Test against kvm_clock unit tests.

Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
11 years agoMerge tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Linus Torvalds [Sat, 6 Apr 2013 02:30:14 +0000 (19:30 -0700)]
Merge tag 'dm-3.9-fixes-2' of git://git./linux/kernel/git/agk/linux-dm

Pull device-mapper fixes from Alasdair Kergon:
 "A pair of patches to fix the writethrough mode of the device-mapper
  cache target when the device being cached is not itself wrapped with
  device-mapper."

* tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm cache: reduce bio front_pad size in writeback mode
  dm cache: fix writes to cache device in writethrough mode

11 years agoMerge tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Linus Torvalds [Sat, 6 Apr 2013 02:29:36 +0000 (19:29 -0700)]
Merge tag 'pci-v3.9-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "PCI updates for v3.9:

  ASPM
      Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"
  kexec
      PCI: Don't try to disable Bus Master on disconnected PCI devices
  Platform ROM images
      PCI: Add PCI ROM helper for platform-provided ROM images
      nouveau: Attempt to use platform-provided ROM image
      radeon: Attempt to use platform-provided ROM image
  Hotplug
      PCI/ACPI: Always resume devices on ACPI wakeup notifications
      PCI/PM: Disable runtime PM of PCIe ports
  EISA
      EISA/PCI: Fix bus res reference
      EISA/PCI: Init EISA early, before PNP"

* tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PM: Disable runtime PM of PCIe ports
  PCI/ACPI: Always resume devices on ACPI wakeup notifications
  PCI: Don't try to disable Bus Master on disconnected PCI devices
  Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"
  radeon: Attempt to use platform-provided ROM image
  nouveau: Attempt to use platform-provided ROM image
  EISA/PCI: Init EISA early, before PNP
  EISA/PCI: Fix bus res reference
  PCI: Add PCI ROM helper for platform-provided ROM images

11 years agoUSB: io_ti, stop dereferencing potential NULL
Jiri Slaby [Thu, 4 Apr 2013 20:41:01 +0000 (22:41 +0200)]
USB: io_ti, stop dereferencing potential NULL

tty_port_tty_get might return a tty which is NULL. But it is
dereferenced unconditionally in edge_send. Stop dereferencing that by
sending usb_serial_port pointer around.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoMerge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi...
Greg Kroah-Hartman [Fri, 5 Apr 2013 22:18:00 +0000 (15:18 -0700)]
Merge tag 'usb-for-v3.10' of git://git./linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
. UDC drivers no longer touch gadget->dev, that's now udc-core
responsibility
. Many more UDC drivers converted to usb_gadget_map/unmap_request()
. UDC drivers no longer initialize DMA-related fields from gadget's
device structure
. UDC drivers don't touch gadget.dev.driver directly
. UDC drivers don't assign gadget.dev.release directly
. Removal of some unused DMA_ADDR_INVALID
. Introduction of CONFIG_USB_PHY
. All phy drivers have been moved to drivers/usb/phy and renamed to
a common naming scheme
. Fix PHY layer so it never returns a NULL pointer, also fix all
callers to avoid using IS_ERR_OR_NULL()
. Sparse fixes all over the place
. drivers/usb/otg/ has been deleted
. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
usage

- new features:
. UDC core now provides a generic way for tracking and reporting
UDC's state (not attached, resuming, suspended, addressed,
default, etc)
. twl4030-usb learned that it shouldn't be enabled during init
. Full DT support for DWC3 has been implemented
. ab8500-usb learned about pinctrl framework
. nop PHY learned about DeviceTree and regulators
. DWC3 learned about suspend/resume
. DWC3 can now be compiled in host-only and gadget-only (as well as
DRD) configurations
. UVC now enables streaming endpoint based on negotiated speed
. isp1301 now implements the PHY API properly
. configfs-based interface for gadget drivers which will lead to
the removal of all code which just combines functions together
to build functional gadget drivers.
. f_serial and f_obex were converted to new configfs interface while
maintaining old interface around.

- non-critical fixes:
. UVC gadget driver got fixes for Endpoint usage and stream calculation
. ab8500-usb fixed unbalanced clock and regulator API usage
. twl4030-usb got a fix for when OMAP3 is booted with cable connected
. fusb300_udc got a fix for DMA usage
. UVC got fixes for two assertions of the USB Video Class Compliance
specification revision 1.1
. build warning issues caused by recent addition of __must_check to
regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>
11 years agoUSB: keyspan: add a sanity test on "len"
Dan Carpenter [Fri, 5 Apr 2013 05:43:20 +0000 (08:43 +0300)]
USB: keyspan: add a sanity test on "len"

"len" comes from the USB transfer and it's probably correct.  The thing
is that we already have similar checks like:

        if (data[i] >= serial->num_ports) {

So adding a sanity test here matches the rest of the code and is a good
idea.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: keyspan: pull in one indent level
Dan Carpenter [Fri, 5 Apr 2013 05:42:41 +0000 (08:42 +0300)]
USB: keyspan: pull in one indent level

We can remove the "if (urb->actual_length) {" check because checking for
"while (i < urb->actual_length) {" is sufficient.  This lets us pull the
code in one indent level.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agousb: chipidea: udc: fix memory leak in _ep_nuke
Michael Grzeschik [Thu, 4 Apr 2013 10:13:47 +0000 (13:13 +0300)]
usb: chipidea: udc: fix memory leak in _ep_nuke

In hardware_enqueue code adds one extra td with dma_pool_alloc if
mReq->req.zero is true. When _ep_nuke will be called for that endpoint,
dma_pool_free will not be called to free that memory again. That patch
fixes this.

Cc: stable <stable@vger.kernel.org> # v3.5
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 5 Apr 2013 21:04:10 +0000 (14:04 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix erroneous sock_orphan() leading to crashes and double
    kfree_skb() in NFC protocol.  From Thierry Escande and Samuel Ortiz.

 2) Fix use after free in remain-on-channel mac80211 code, from Johannes
    Berg.

 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can
    leak it from one namespace into another.  Fix from Gao Feng and
    Patrick McHardy.

 4) Fix overflow in channel scanning array of mwifiex driver, from Stone
    Piao.

 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang.

 6) Synchronization of unicast address lists to the undelying device
    doesn't work because whether to sync is maintained as a boolean
    rather than a true count.  Fix from Vlad Yasevich.

 7) Fix corruption of TSO packets in atl1e by limiting the segmented
    packet length.  From Hannes Frederic Sowa.

 8) Revert bogus AF_UNIX credential passing change and fix the
    coalescing issue properly, from Eric W Biederman.

 9) Changes of ipv4 address lifetime settings needs to generate a
    notification, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  netfilter: don't reset nf_trace in nf_reset()
  net: ipv4: notify when address lifetime changes
  ixgbe: fix registration order of driver and DCA nofitication
  af_unix: If we don't care about credentials coallesce all messages
  Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL"
  bonding: remove sysfs before removing devices
  atl1e: limit gso segment size to prevent generation of wrong ip length fields
  net: count hw_addr syncs so that unsync works properly.
  r8169: fix auto speed down issue
  netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths
  mwifiex: limit channel number not to overflow memory
  NFC: microread: Fix build failure due to a new MEI bus API
  iwlwifi: dvm: fix the passive-no-RX workaround
  netfilter: nf_conntrack: fix error return code
  NFC: llcp: Keep the connected socket parent pointer alive
  mac80211: fix idle handling sequence
  netfilter: nfnetlink_acct: return -EINVAL if object name is empty
  netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init()
  netfilter: reset nf_trace in nf_reset
  mac80211: fix remain-on-channel cancel crash
  ...

11 years agox86: Fix rebuild with EFI_STUB enabled
Jan Beulich [Wed, 3 Apr 2013 14:47:33 +0000 (15:47 +0100)]
x86: Fix rebuild with EFI_STUB enabled

eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence
their .cmd files don't get included by the build machinery, leading to
the files always getting rebuilt.

Rather than adding the two files individually, take the opportunity and
add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment
at the top of the file to be shrunk quite a bit.

At the same time, remove a pointless flags override line - the variable
assigned to was misspelled anyway, and the options added are
meaningless for assembly sources.

[ hpa: the patch is not minimal, but I am taking it for -urgent anyway
  since the excess impact of the patch seems to be small enough. ]

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
11 years agousb: chipidea: udc: fix memory access of shared memory on armv5 machines
Michael Grzeschik [Thu, 4 Apr 2013 10:13:46 +0000 (13:13 +0300)]
usb: chipidea: udc: fix memory access of shared memory on armv5 machines

The udc uses an shared dma memory space between hard and software. This
memory layout is described in ci13xxx_qh and ci13xxx_td which are marked
with the attribute ((packed)).

The compiler currently does not know about the alignment of the memory
layout, and will create strb and ldrb operations.

The Datasheet of the synopsys core describes, that some operations on
the mapped memory need to be atomic double word operations. I.e. the
next pointer addressing in the qhead, as otherwise the hardware will
read wrong data and totally stuck.

This is also possible while working with the current active td queue,
and preparing the td->ptr.next in software while the hardware is still
working with the current active td which is supposed to be changed:

writeb(0xde, &td->ptr.next + 0x0); /* strb */
writeb(0xad, &td->ptr.next + 0x1); /* strb */

<----- hardware reads value of td->ptr.next and get stuck!

writeb(0xbe, &td->ptr.next + 0x2); /* strb */
writeb(0xef, &td->ptr.next + 0x3); /* strb */

This appeares on armv5 machines where the hardware does not support
unaligned 32bit operations.

This patch adds the attribute ((aligned(4))) to the structures to tell
the compiler to use 32bit operations. It also adds an wmb() for the
prepared TD data before it gets enqueued into the qhead.

Cc: stable <stable@vger.kernel.org> # v3.5
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agonetfilter: don't reset nf_trace in nf_reset()
Patrick McHardy [Fri, 5 Apr 2013 18:42:05 +0000 (20:42 +0200)]
netfilter: don't reset nf_trace in nf_reset()

Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code
to reset nf_trace in nf_reset(). This is wrong and unnecessary.

nf_reset() is used in the following cases:

- when passing packets up the the socket layer, at which point we want to
  release all netfilter references that might keep modules pinned while
  the packet is queued. nf_trace doesn't matter anymore at this point.

- when encapsulating or decapsulating IPsec packets. We want to continue
  tracing these packets after IPsec processing.

- when passing packets through virtual network devices. Only devices on
  that encapsulate in IPv4/v6 matter since otherwise nf_trace is not
  used anymore. Its not entirely clear whether those packets should
  be traced after that, however we've always done that.

- when passing packets through virtual network devices that make the
  packet cross network namespace boundaries. This is the only cases
  where we clearly want to reset nf_trace and is also what the
  original patch intended to fix.

Add a new function nf_reset_trace() and use it in dev_forward_skb() to
fix this properly.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Fri, 5 Apr 2013 19:23:12 +0000 (12:23 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "Fixes for a number of small glitches in various corners of the MIPS
  tree.  No particular areas is standing out.

  With this applied all MIPS defconfigs are building fine.  No merge
  conflicts are expected."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Delete definition of SA_RESTORER.
  MIPS: Fix ISA level which causes secondary cache init bypassing and more
  MIPS: Fix build error cavium-octeon without CONFIG_SMP
  MIPS: Kconfig: Rename SNIPROM too
  MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI"
  MIPS: Unbreak function tracer for 64-bit kernel.

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Linus Torvalds [Fri, 5 Apr 2013 19:22:02 +0000 (12:22 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-3.0-fixes

Pull GFS2 fixes from Steven Whitehouse:
 "There are two patches which fix up a couple of minor issues in the DLM
  interface code, a missing error path in gfs2_rs_alloc(), one patch
  which fixes a problem during "withdraw" and a fix for discards/FITRIM
  when using 4k sector sized devices."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Issue discards in 512b sectors
  GFS2: Fix unlock of fcntl locks during withdrawn state
  GFS2: return error if malloc failed in gfs2_rs_alloc()
  GFS2: use memchr_inv
  GFS2: use kmalloc for lvb bitmap

11 years agofirmware,IB/qib: revert firmware file move
Mike Marciniszyn [Fri, 5 Apr 2013 18:30:13 +0000 (14:30 -0400)]
firmware,IB/qib: revert firmware file move

Commit e2eed58b4fbf ("IB/qib: change QLogic to Intel") moved a firmware
file potentially breaking the ABI.

This patch reverts that aspect of the fix as well as reverting the
firmware name as used in qib.

Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Linus Torvalds [Fri, 5 Apr 2013 17:04:41 +0000 (10:04 -0700)]
Merge tag 'spi-fix-v3.9-rc5' of git://git./linux/kernel/git/broonie/misc

Pull spi fixes from Mark Brown:
 "A bunch of small driver fixes plus a fix for error handling in the
  core - nothing too exciting overall."

* tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts
  spi: Unlock a spinlock before calling into the controller driver.
  spi/s3c64xx: modified error interrupt handling and init
  spi/bcm63xx: don't disable non enabled clocks in probe error path
  spi/bcm63xx: Remove unused variable
  spi: slink-tegra20: move runtime pm calls to transfer_one_message

11 years agoGFS2: Issue discards in 512b sectors
Bob Peterson [Fri, 22 Mar 2013 14:07:24 +0000 (10:07 -0400)]
GFS2: Issue discards in 512b sectors

This patch changes GFS2's discard issuing code so that it calls
function sb_issue_discard rather than blkdev_issue_discard. The
code was calling blkdev_issue_discard and specifying the correct
sector offset and sector size, but blkdev_issue_discard expects
these values to be in terms of 512 byte sectors, even if the native
sector size for the device is different. Calling sb_issue_discard
with the BLOCK size instead ensures the correct block-to-512b-sector
translation. I verified that "minlen" is specified in blocks, so
comparing it to a number of blocks is correct.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
11 years agoRevert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"
Johan Hovold [Fri, 5 Apr 2013 16:16:34 +0000 (18:16 +0200)]
Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"

This reverts commit 0ef1594c017521ea89278e80fe3f80dafb17abde.

This patch introduced a few races which cannot be easily fixed with a
small follow-up patch. Furthermore, the SoC with the broken hardware
register, which this patch intended to add support for, can only be used
with device trees, which this driver currently does not support.

[ Here is the discussion that led to this "revert" patch:
  https://lkml.org/lkml/2013/4/3/176 ]

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux
Linus Torvalds [Fri, 5 Apr 2013 16:15:46 +0000 (09:15 -0700)]
Merge tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux

Pull fbdev fixes from Tomi Valkeinen:
 "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode
  code"

* tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux:
  video:uvesafb: Fix dereference NULL pointer code path
  fbmon: use VESA_DMT_VSYNC_HIGH to fix typo

11 years agoMerge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 5 Apr 2013 16:06:57 +0000 (09:06 -0700)]
Merge tag 'sound-3.9' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This contains slightly more volumes than usual at this stage, mostly
  because of my vacation in the last week.  Nothing to scare, all small
  and/or trivial fixes:

   - Fix loop path handling in ASoC DAPM
   - Some memory handling fixes in ASoC core
   - Fix spear_pcm to adapt to the updated API
   - HD-audio HDMI ELD handling fixes
   - Fix for CM6331 USB-audio SRC change bugs
   - Revert power_save_controller option change due to user-space usage
   - A few other small ASoC and HD-audio fixes"

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/generic - fix uninitialized variable
  Revert "ALSA: hda - Allow power_save_controller option override DCAPS"
  ALSA: hda - fix typo in proc output
  ALSA: hda - Enabling Realtek ALC 671 codec
  ALSA: usb: Work around CM6631 sample rate change bug
  ALSA: hda - bug fix on HDMI ELD debug message
  ALSA: hda - bug fix on return value when getting HDMI ELD info
  ASoC: dma-sh7760: Fix compile error
  ASoC: core: fix invalid free of devm_ allocated data
  ASoC: spear_pcm: Update to new pcm_new() API
  ASoC:: max98090: Remove executable bit
  ASoC: dapm: Fix pointer dereference in is_connected_output_ep()
  ASoC: pcm030 audio fabric: remove __init from probe
  ASoC: imx-ssi: Fix occasional AC97 reset failure
  ASoC: core: fix possible memory leak in snd_soc_bytes_put()
  ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff()
  ASoC: dapm: Fix handling of loops
  ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case

11 years agodm cache: reduce bio front_pad size in writeback mode
Mike Snitzer [Fri, 5 Apr 2013 14:36:34 +0000 (15:36 +0100)]
dm cache: reduce bio front_pad size in writeback mode

A recent patch to fix the dm cache target's writethrough mode extended
the bio's front_pad to include a 1056-byte struct dm_bio_details.
Writeback mode doesn't need this, so this patch reduces the
per_bio_data_size to 16 bytes in this case instead of 1096.

The dm_bio_details structure was added in "dm cache: fix writes to
cache device in writethrough mode" which fixed commit e2e74d617e ("dm
cache: fix race in writethrough implementation").  In writeback mode
we avoid allocating the writethrough-specific members of the
per_bio_data structure (the dm_bio_details structure included).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
11 years agodm cache: fix writes to cache device in writethrough mode
Darrick J. Wong [Fri, 5 Apr 2013 14:36:32 +0000 (15:36 +0100)]
dm cache: fix writes to cache device in writethrough mode

The dm-cache writethrough strategy introduced by commit e2e74d617eadc15
("dm cache: fix race in writethrough implementation") issues a bio to
the origin device, remaps and then issues the bio to the cache device.
This more conservative in-series approach was selected to favor
correctness over performance (of the previous parallel writethrough).
However, this in-series implementation that reuses the same bio to write
both the origin and cache device didn't take into account that the block
layer's req_bio_endio() modifies a completing bio's bi_sector and
bi_size.  So the new writethrough strategy needs to preserve these bio
fields, and restore them before submission to the cache device,
otherwise nothing gets written to the cache (because bi_size is 0).

This patch adds a struct dm_bio_details field to struct per_bio_data,
and uses dm_bio_record() and dm_bio_restore() to ensure the bio is
restored before reissuing to the cache device.  Adding such a large
structure to the per_bio_data is not ideal but we can improve this
later, for now correctness is the important thing.

This problem initially went unnoticed because the dm-cache test-suite
uses a linear DM device for the dm-cache device's origin device.
Writethrough worked as expected because DM submits a *clone* of the
original bio, so the original bio which was reused for the cache was
never touched.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
11 years agoMIPS: Delete definition of SA_RESTORER.
Ralf Baechle [Mon, 25 Mar 2013 12:43:14 +0000 (13:43 +0100)]
MIPS: Delete definition of SA_RESTORER.

SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
supported its use and no libc was using it, so the entire sa-restorer
functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.]
for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid
accidental reuse of the mask bit.

Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear
sa_restorer on execve] adds code that assumes sa_sigaction has an
sa_restorer field, if SA_RESTORER is defined which would break MIPS.
So remove the SA_RESTORER definition before the v3.8.4 merge.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8)

11 years agoMIPS: Fix ISA level which causes secondary cache init bypassing and more
Deng-Cheng Zhu [Mon, 1 Apr 2013 18:14:28 +0000 (18:14 +0000)]
MIPS: Fix ISA level which causes secondary cache init bypassing and more

The commit a96102be70 introduced set_isa() where compatible ISA info is
also set aside from the one gets passed in. It means, for example, 1004K
will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like
the following inappropriate:

if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
    c->isa_level == MIPS_CPU_ISA_M32R2 ||
    c->isa_level == MIPS_CPU_ISA_M64R1 ||
    c->isa_level == MIPS_CPU_ISA_M64R2)

This patch fixes it.

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
11 years agoMIPS: Fix build error cavium-octeon without CONFIG_SMP
EunBong Song [Sun, 24 Mar 2013 22:18:35 +0000 (22:18 +0000)]
MIPS: Fix build error cavium-octeon without CONFIG_SMP

Singed-off-by: EunBong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>