staging:iio: chan_spec - take extend_name constant.

I can't envision a case where this is not constant and we
don't seem to have any in tree, so lets clear up this loose
end.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:iio_core.h make less dependent on other included headers

There are a lot of pointers to structures used in here that are not
declared unless a particular header is included first.  Deal with
the IIO specific ones by putting in forward declarations and the
other ones by including kernel.h and device.h.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:Documentation: Fix a cut and paste error.

falling is repeated in some entries instead of 1x falling and 1x rising
for the entry.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:light:tsl2563 channel spec buglet / always reading same adc.

The IIO_LIGHT channel was not marked as being a processed_val despite
clearly being in lux.

The IIO_INTENSITY channel reads were dependent on channel and that isn't
specified for either adc (as they now use modifiers).  Hence use the
modifier instead.

Reported-by: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NET: pc300, move to staging as it is broken

It was marked as BROKEN back in 2008. It is because the tty handling
in the driver is really broken.

There was some activity in January 2012 to fix the driver, but the
patch was commented to be bogus:
  https://lkml.org/lkml/2012/1/29/160
and we have not heard back from the author since then:
  https://lkml.org/lkml/2012/3/28/412

So since nobody stepped in and rewrote the driver, it is time to move
it out of line now. And drop it some time later if nobody comes up
with patches to fix the driver in staging.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrea Shepard <andrea@persephoneslair.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: replace open-coded ARRAY_SIZEs

spatch http://coccinelle.lip6.fr/rules/array.cocci did these.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio: use spi->irq valid rather than querying available modes

Given these drivers only try to add the trigger if a valid
irq is present it is clearer to check the same condition when
deciding whether to remove it on a later trigger.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:accel:lis3l02dq add symmetry to check for presence of trigger.

Checking indio_dev->modes is uggly and not symmetric with the conditions
on whether triggers are allowed in the first place.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:max1363 enable use with inkernel interfaces.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio fill in some missing docs

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:adc:max1363 fix missing update_scan_mask callback.

When moving over to the new sw_ring_preenable I managed to add
this callback to only one of the two iio_info structures. As
such only some devices will currently work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:buffer example fix typos

I have no idea how I managed to munge the previous
patch related to this.  Sorry all.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: evict abandoned 68360serial.c driver from the kernel

commit 3a0db7215c88077b61a673215756ec4a0dc0c7a5

    "TTY: serial, move 68360 driver to staging"

did so because the driver had remained broken since 2008.  It also
added this text to the TODO file:

   "If no one steps up to adopt any of these drivers, they will
    be removed in the 3.4 release."

A quick search on the internet doesn't reveal anyone actively
trying to update/fix this driver, so follow through on the above
and remove it from the pending 3.4 release.

Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/omap: dmabuf/prime support

For now just implementing the exporting APIs, not yet importing.  And
kmap is rejected on tiled buffers (although the usefulness of that seems
questionable, but could be added later if needed).

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove an unnecessary dev_info()

usbdux_attach_common() prints two messages via dev_info() that shows a
device has been attached.  The first of these messages includes an index
into a static array that the function determines by pointer subtraction,
assuming the pointer passed to the function points to an element of the
array.  Dan Carpenter pointed out that this was kind of ugly.  Since the
dev_info() that prints the array index doesn't add anything useful
(since no other messages print the array index and nothing else uses
it), let's just get rid of it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use attach_usb() hook

Change the usbdux driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: use attach_pci() hook

Change the amplc_pci224 driver to use the new attach_pci() hook in
struct comedi_driver to auto-configure probed PCI devices.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: restrict comedi_auto_config() to single driver

comedi_auto_config() only needs to consider a single struct
comedi_driver object, but it currently calls comedi_device_attach()
which looks at all struct comedi_driver objects registered with the
Comedi core.

Instead, call the recently added comedi_auto_config_helper() with a new
wrapper comedi_auto_config_wrapper() to mimic the effect of
comedi_device_attach() for a single struct comedi_driver.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass struct comedi_driver * to comedi_auto_config()

Pass a pointer to the struct comedi_driver to comedi_auto_config()
instead of the driver name.  comedi_auto_config() will be changed to
make use of this.  It currently calls comedi_device_attach() which
examines the whole list of struct comedi_driver objects.  It will be
changed to restrict itself to just the supplied struct comedi_driver
object.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add bus-type-specific attach hooks for PCI and USB

The Comedi auto-configuration mechanism used to bind hardware devices to
comedi devices automatically is pretty kludgy.  It fakes a "manual"
configuration of the comedi device as though the COMEDI_DEVCONFIG ioctl
(or the 'comedi_config' utility) were used.  In particular, the
low-level comedi driver's '->attach()' routine is called with a pointer
to the struct comedi_device being attached and a pointer to a 'struct
devconfig' containing a device name string and a few integer options to
help the attach routine locate the device being attached.  In the case
of PCI devices, these integer options are the PCI bus and slot numbers.
In the case of USB devices, there are no integer options and it relies
more on pot luck to attach the correct device.

This patch adds a couple of bus-type-specific attach routine hooks to
the struct comedi_driver, which a low-level driver can optionally fill
in if it supports auto-configuration.

A low-level driver that supports auto-configuration of {PCI,USB} devices
calls the existing comedi_{pci,usb}_auto_config() when it wishes to
auto-configure a freshly probed device (maybe after loading firmware).
This will call the new '->attach_{pci,usb}()' hook if the driver has
defined it, otherwise it will fall back to calling the '->attach()' hook
as before.  The '->attach_{pci,usb}()' hook gets a pointer to the struct
comedi_device and a pointer to the struct {pci_dev,usb_interface} and
can figure out the {PCI,USB} device details for itself.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: refactor comedi_device_attach() a bit

Split the post-config part of comedi_device_attach() into new function
comedi_device_postconfig() and rearrange the rest of the function a bit.

The new comedi_device_postconfig() function will be called by some new
bus-type-specific auto-attach functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass usb interface to comedi_usb_auto_config

The comedi_usb_auto_config() and comedi_usb_auto_unconfig() functions
currently take a 'struct usb_device *'.  It makes more sense to pass a
'struct usb_interface *' to allow for composite USB devices.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't hijack hardware device private data

comedi_auto_config() associates a Comedi minor device number with an
auto-configured hardware device and comedi_auto_unconfig() disassociates
it.  Currently, these use the hardware device's private data pointer to
point to some allocated storage holding the minor device number.  This
is a bit of a waste of the hardware device's private data pointer,
preventing it from being used for something more useful by the low-level
comedi device drivers.  For example, it would make more sense if
comedi_usb_auto_config() was passed a pointer to the struct
usb_interface instead of the struct usb_device, but this cannot be done
currently because the low-level comedi drivers already use the private
data pointer in the struct usb_interface for something more useful.

This patch stops the comedi core hijacking the hardware device's private
data pointer.  Instead, comedi_auto_config() stores a pointer to the
hardware device's struct device in the struct comedi_device_file_info
associated with the minor device number, and comedi_auto_unconfig()
calls new function comedi_find_board_minor() to recover the minor device
number associated with the hardware device.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't disable IRQ for comedi_file_info_table_lock

None of the functions that acquire the comedi_file_info_table_lock
spin-lock need to disable interrupts.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass 'struct comedi_driver *' to comedi_..._auto_config

The comedi_pci_auto_config() and comedi_usb_auto_config() functions
currently take a board name parameter which is actually a driver name
parameter.  Replace it with a pointer to the struct comedi_driver.  This
will allow comedi_pci_auto_config() and comedi_usb_auto_config() to call
bus-type-specific auto-configuration hooks in the struct comedi_driver
if they exist (they don't yet).  The idea is that these
bus-type-specific auto-configuration hooks won't have to search the bus
for the device being auto-configured like 'attach()' hook has to.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: separately configure ISA and PCI

The das08 driver supports both ISA and PCI cards, but currently is
configured outside the ISA and PCI comedi driver sections.  The module
is also used by the das08_cs driver.  This patch splits the
configuration to make the ISA and PCI parts separately selectable, and
changes the driver to only include the selected ISA and/or PCI board
types.  Also, if neither the ISA or PCI parts are selected, and the
module is only needed for the das08_cs driver, don't register the driver
as a comedi driver as it doesn't have any boards to support.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc263: separately configure ISA and PCI

The amplc_pc263 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.

Also fix a conditionally mismatched brace in pc263_detach().

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: separately configure ISA and PCI

The amplc_pc236 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: separately configure ISA and PCI

The amplc_dio200 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: VME: Ensure TSI148 link list descriptors are written big endian

The DMA functionality fails to work on little endian processors, such as
found on x86 based platforms. The DMA engine copies the link list
descriptors from memory into big endian registers. On little endian systems
this results in the values being byte swapped. This patch uses standard
kernel functionality to ensure that the descriptors are stored in big
endian format.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: VME: Convert TSI148 to use dma_map_single

The DMA functionality fails to work on some Intel based platforms. Some
recent Intel platforms have an IOMMU. Transferring the DMA descriptors,
which were mapped using virt_to_phys(), failed. This patch updates the
driver to use dma_map_single().

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c: coding style fix

Eighth patch in a series to fix coding style in IPv6Protocol.c
This patch removes some uneeded braces around single line if/for statements

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c: coding style fix

Seventh patch in a series of patches to fix coding style in IPv6Protocol.c
this patch makes the file mostly conform to the 80 char line limit
there are some exceptions to this rule I have left in to aid readability

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c coding style fix

Sixth in a series of patche to fix coding style in IPv6Protocol.c
This patch changes the format of if statments from:
if (#VALUE == variable)
to:
if (variable == #VALUE)

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c coding style fix

Fith in a series of patche to fi coding syle in IPv6Protocol.c
Fixed trailing whitespaces and replaced spaces with tabs
in code indents

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c coding style fix

Fourth patch in a series of patches to fix  coding style in IPv6Protocol.c
Continuation of fixing spacing arount ','

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c fix coding style

Third in a series of patches to fix coding style in Ipv6Protocol.c
This patch fixes the spacing around ',' in function calls.

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c coding style fix

Second in a set of patches to fix coding style in IPv6Protocol.c
This patch changes the commenting style

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: IPv6Protocol.c: Fix coding style

The first in a series of 8 patches to fix IPv6Protocol.c
This first patch fixes formatting issues for braced statements
(e.g. if/for/while)

Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:ramster Fix typos in staging:ramster

The below patch fixes some typos that I found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:omapdrm Fix typos in drivers:omapdrm

The below patch fixes some typos that I found while reading.  Note: I
was told to hold off sending anything until *rc1 so hopefully now its
alright.(wasnt sure what kernel *rc*)

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Fix typo in multiple files

Collect spelling typo in multiple files within staging directory.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Fix typo in wlags49_h2

Correct spellings within wlags49_h2

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vme: Replace semaphore by mutex.

Replace binary semaphore by mutex for code cleanup.
Mutex also gives better performance than semaphore.

Add 'mutex_destroy()' in 'vme_user_remove()' routine.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fix android persistent_ram printk formats

Fix printk format warnings in android/persistent_ram.c:

drivers/staging/android/persistent_ram.c:426:4: warning: format '%ld' expects type 'long int', but argument 2 has type 'size_t'
drivers/staging/android/persistent_ram.c:426:4: warning: format '%ld' expects type 'long int', but argument 3 has type 'size_t'
drivers/staging/android/persistent_ram.c:430:4: warning: format '%ld' expects type 'long int', but argument 2 has type 'size_t'
drivers/staging/android/persistent_ram.c:430:4: warning: format '%ld' expects type 'long int', but argument 3 has type 'size_t'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5139: a couple off by one fixes

Inside the array we check ms_start_idx[seg_no + 1] so on the last round
through we end up going past the end of the array.

Also if we don't break out of the loop early then we are beyond the end
of the array there as well.  With this change, if we don't find what we
are looking for, we end on the last element of the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/telephony/ixj.c: delete trailing whitespace

There's a lot of trailing whitespace in drivers/telephony/ixj.c .
This patch removes it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: inline XGI_GetResInfo()

Inline a trivial function.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate redundant struct definition

Replace XGI330_LCDDataDesStruct with identical XGI_LCDDesStruct.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete VB_ExtTVEdgeIndex

Delete VB_ExtTVEdgeIndex. It's 0 for all video modes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete VB_ExtTVFlickerIndex

Delete VB_ExtTVFlickerIndex. It's 0 for all video modes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_ExtStruct: delete unused fields

Delete unused struct fields.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete legacy DAC data

Delete DAC data for unsupported legacy modes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete StandTableIndex parameters

Delete unused function parameters.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: truncate XGI330_StandTable

Only single element from XGI330_StandTable is used, so the array can be
truncated.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete code for EGA or lower modes

All supported modes have ModeType > 2.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete SModeIDTable

Delete unused data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: drop code for legacy VGA modes

Drop code for mode_no <= 14. These are not supported so this is all
just dead code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: unwrap mode table lines

Unwrap lines to improve readability. Comments were deleted as they were not
really informative.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete MD_XGI300

Nobody cares about this bit.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete mode rows and columns

Delete redudant rows and columns data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete mode names from the mode table

Delete mode names from the table. They are just redundant data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: drop redudant mode table entries

Since the mode search is not string-based anymore, we can drop XxYx24
entries which were just duplicated XxYx32 entries.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate string comparison from mode search

Eliminate string comparison from the video mode search.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete rate_idx from mode table

The default rate_idx is same for all video modes, no need to keep that
in the table.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete XGI300paneltype

Delete unused table.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: drop XG45 code

XG45 is not recognized/supported by the driver.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: drop XG41 code

XG_41 is not listed in xgifb_pci_table, so the code can be safely dropped.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGIfb_mode_rate_to_dclock: initialize ModeIdIndex properly

Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong clock data may be used.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGIfb_mode_rate_to_dclock: delete commented-out code

Delete code that has been commented out.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGIfb_mode_rate_to_ddata: initialize ModeIdIndex properly

Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong video mode data may be used.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGIfb_mode_rate_to_ddata: delete commented-out code

Delete code that has been commented out.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: fix addressing issues on platform with long physical addressing

Some platforms (e.g. ppc460ex) have 36-bit physical addressing, while
sizeof(unsigned long) == 4. Adapt xgifb driver to use phys_addr_t for
physical address variables instead of unsigned long.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: simplify vga I/O ports handling

XGIfb driver transfers integer port number through several typecasts via
pjIOAddress field. Drop that field completely and use vga_base field of
xgifb_info directly.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: drop RelIO from vb_device_info

The RelIO field is unused in the driver, drop it.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: remove unused variable

In function XGIfb_do_set_var() remove unused variable sr_data.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: Fix typo in printed text

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: fix potential segfault because of unchecked return value of strchr.

This doesn't happen with the usbip virtual hci module, but another
module wanting to interface with this user space code could cause a
seg-fault by sending data without newlines.

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: Replace kmalloc+memset by kzalloc and add error handling.

Replace kmalloc+memset pair by kzalloc() in 'wl_wds_device_alloc()'.
Add error handling to avoid null derefernce.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:rts_pstor: fix coding style issue in rtsx_transport.c

This patch changes the space of the indent to the tab that warning
found by the checkpatch.pl tool.

Signed-off-by: Hitoshi NAKAMORI<hitoshi.nakamori@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:octeon Fix typos in staging:octeon

The below patch is a resend to fix some typos and comments that
I have found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rts_pstor:Fix unbalanced parentheses

Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap/drm: dmm should return proper errors

Minor error path clean-up.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Replace existing event logging mechanism

This patch replaces existing event logging mechanism from ioctl to debugfs.
This patch replaces previous patch submitted by Chris Kelly. Previous patch can
be found at :-
http://article.gmane.org/gmane.linux.usb.general/60026/

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: wd.c normalize debug and error messages

1. use wd: prefix for all messages
2. fix strings
3. change from dev_dbg to dev_err where appropriate

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: refactor mei_wd_host_init function

The function has returned false in both error and success
cases.

1. change return value to int and return appropriate errno
2. use typical Linux kernel error handling.
3. normalize debug messages

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: cleanup driver naming strings

1. use only mei_driver_name and remove define MEI_DRIVER_NAME
2. drop MEI_DEV_NAME and assign device name directly
3. drop mei_driver_string, it is not used

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: struct amt_wd_dev' should it be static

fix sparse warning:
'amt_wd_dev' was not declared. Should it be static

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: remove unused variable

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: use dev_err instead of printk

one instance of bare printk was forgotten in init.c file

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: mei_wd_set_start_timeout should be static

mei_wd_set_start_timeout is only used from within wd.c
so remove its declaration from interface.h and mark
it static

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: define pr_fmt prefix for pr_ macros

define pr_fmt macro and remove mei: from the messages

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:quatech_usb2:quatech_usb2.c Fix typo in staging:quatech_usb2

The below patch fixes a typo that I found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:panel:panel.c Fix typo in staging:panel

The below patch fixes a typo I found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Willy Tarreau <willy@meta-x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:olpc_dcon:olpc_dcon_xo_1.c Fix typo in staging:olpc_dcon

The below patch fixes a typo I found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:ozwpan:ozhcd.c Fix typos in staging:ozwpan

The below patch fixes a typo that I found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:nvec:nvec.h Fix typos in staging:nvec

The below patch fixes a typo I found while reading.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: fix the usage of kthread_stop()

stub_shutdown_connection() and vhci_shutdown_connection() use
task_is_dead() before kthread_stop(). This buys nothing and wrong.
kthread_stop() is fine even if this thread is dead. However, if it
is dead nothing protects this task_struct, we shouldn't touch this
memory.

Change the code to do the necessary get_task_struct/put_task_struct.

This patch assumes that

- xxx_shutdown_connection() is always called, so we can't
  leak the task_struct.

- kthread_stop_put() can't be called twice on the same task.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Matt Mooney <mfm@muteddisk.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192e - fix typo in printk message

In drivers/staging/rtl8192e/rtl8192e/rtl_core.c the follwing printk-message can be found:

printk(KERN_ERR "rtl8193e: Unable to allocate space "

This is quite obviously just a typo, all other similar messages use
"rtl8192e" and the string "rtl8193e" does not occur anywhere else in the
source of the driver.

Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se: r8185b_init.c: Fix comment blocks

Reformated comment blocks to meet Coding Style

Signed-off-by: Andrew Miller <amiller@amilx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>