firefly-linux-kernel-4.4.55.git
7 years agoiommu/vt-d: Tylersburg isoch identity map check is done too late.
Ashok Raj [Mon, 30 Jan 2017 17:39:53 +0000 (09:39 -0800)]
iommu/vt-d: Tylersburg isoch identity map check is done too late.

commit 21e722c4c8377b5bc82ad058fed12165af739c1b upstream.

The check to set identity map for tylersburg is done too late. It needs
to be done before the check for identity_map domain is done.

To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes: 86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reported-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoiommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
CQ Tang [Mon, 30 Jan 2017 17:39:52 +0000 (09:39 -0800)]
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu

commit aaa59306b0b7e0ca4ba92cc04c5db101cbb1c096 upstream.

Some of the macros are incorrect with wrong bit-shifts resulting in picking
the incorrect invalidation granularity. Incorrect Source-ID in extended
devtlb invalidation caused device side errors.

To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: CQ Tang <cq.tang@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes: 2f26e0a9 ("iommu/vt-d: Add basic SVM PASID support")
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoregulator: Fix regulator_summary for deviceless consumers
Leonard Crestez [Tue, 14 Feb 2017 15:31:03 +0000 (17:31 +0200)]
regulator: Fix regulator_summary for deviceless consumers

commit e42a46b6f52473661ad192f76a128a68fe301df4 upstream.

It is allowed to call regulator_get with a NULL dev argument
(_regulator_get explicitly checks for it) but this causes an error later
when printing /sys/kernel/debug/regulator_summary.

Fix this by explicitly handling "deviceless" consumers in the debugfs code.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agostaging: rtl: fix possible NULL pointer dereference
Arnd Bergmann [Wed, 11 Jan 2017 14:53:08 +0000 (15:53 +0100)]
staging: rtl: fix possible NULL pointer dereference

commit 6e017006022abfea5d2466cad936065f45763ad1 upstream.

gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:

staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]

I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.

This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.

Fixes: 1cc18a22b96b ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
Hui Wang [Mon, 27 Feb 2017 02:11:47 +0000 (10:11 +0800)]
ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine

commit 29693efcea0f38cf40d0055d2401490a4f9bf8be upstream.

On this machine, the micmute button is connected to Line2 of the
codec and the micmute led is connected to GPIO2 of the codec.

After applying this quirk, both hotkey and led work well.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
Takashi Iwai [Tue, 28 Feb 2017 16:27:57 +0000 (17:27 +0100)]
ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming

commit 493de342748cc6f52938096f5480cf291da58a0b upstream.

Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like
Inspiron 7599 to support its subwoofer speaker.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: seq: Fix link corruption by event error handling
Takashi Iwai [Tue, 28 Feb 2017 21:15:51 +0000 (22:15 +0100)]
ALSA: seq: Fix link corruption by event error handling

commit f3ac9f737603da80c2da3e84b89e74429836bb6d upstream.

The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list.  When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.

Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.

This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback().  Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: ctxfi: Fallback DMA mask to 32bit
Takashi Iwai [Tue, 28 Feb 2017 16:16:48 +0000 (17:16 +0100)]
ALSA: ctxfi: Fallback DMA mask to 32bit

commit 15c75b09f8d190f89ab4db463b87d411ca349dfe upstream.

Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails.  This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed.  We should
fall back to the default 32bit DMA when 64bit DMA fails.

Fixes: 6d74b86d3c0f ("ALSA: ctxfi - Allow 64bit DMA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: timer: Reject user params with too small ticks
Takashi Iwai [Tue, 28 Feb 2017 13:49:07 +0000 (14:49 +0100)]
ALSA: timer: Reject user params with too small ticks

commit 71321eb3f2d0df4e6c327e0b936eec4458a12054 upstream.

When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.

For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms.  When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: hda - fix Lewisburg audio issue
Jaroslav Kysela [Wed, 15 Feb 2017 16:09:42 +0000 (17:09 +0100)]
ALSA: hda - fix Lewisburg audio issue

commit e7480b34ad1ab84a63540b2c884cb92c0764ab74 upstream.

Like for Sunrise Point, the total stream number of Lewisburg's
input and output stream exceeds 15 (GCAP is 0x9701), which will
cause some streams do not work because of the overflow on
SDxCTL.STRM field if using the legacy stream tag allocation method.

Fixes: 5cf92c8b3dc5 ("ALSA: hda - Add Intel Lewisburg device IDs Audio")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: hda/realtek - Cannot adjust speaker's volume on a Dell AIO
Kai-Heng Feng [Thu, 16 Feb 2017 07:26:54 +0000 (15:26 +0800)]
ALSA: hda/realtek - Cannot adjust speaker's volume on a Dell AIO

commit 9f1bc2c4c58fcb2d86e0e26437dc8f3a18ac3276 upstream.

The issue is the same as "dd9aa335c880 ALSA: hda/realtek - Can't adjust
speaker's volume on a Dell AIO", the output requires to connect to a node
with Amp-out capability.

Applying the same fixup "ALC298_FIXUP_SPK_VOLUME" can fix the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoARM: dts: at91: Enable DMA on sama5d2_xplained console
Alexandre Belloni [Thu, 19 Jan 2017 22:05:39 +0000 (23:05 +0100)]
ARM: dts: at91: Enable DMA on sama5d2_xplained console

commit 78162d48466d23c45a784034630c5928af631e3d upstream.

Enable DMA on uart1 to get a more reliable console.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoARM: dts: at91: Enable DMA on sama5d4_xplained console
Alexandre Belloni [Thu, 19 Jan 2017 00:46:58 +0000 (01:46 +0100)]
ARM: dts: at91: Enable DMA on sama5d4_xplained console

commit ef8d02d4a2c36f7a93e74c95a9c419353b310117 upstream.

Enable DMA on usart3 to get a more reliable console. This is especially
useful for automation and kernelci were a kernel with PROVE_LOCKING enabled
is quite susceptible to character loss, resulting in tests failure.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoARM: at91: define LPDDR types
Alexandre Belloni [Tue, 25 Oct 2016 09:37:58 +0000 (11:37 +0200)]
ARM: at91: define LPDDR types

commit e3f0a4017c2143b4b813df6a93e8cf79e3f76936 upstream.

The Atmel MPDDR controller support LPDDR2 and LPDDR3 memories, add their
types.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agomedia: fix dm1105.c build error
Randy Dunlap [Sun, 8 Jan 2017 01:08:49 +0000 (23:08 -0200)]
media: fix dm1105.c build error

commit e3bb3cddd177550d63a3e4909cf1a7782f13414d upstream.

Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.

drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agouvcvideo: Fix a wrong macro
Guennadi Liakhovetski [Mon, 12 Dec 2016 11:16:51 +0000 (09:16 -0200)]
uvcvideo: Fix a wrong macro

commit 17c341ec0115837a610b2da15e32546e26068234 upstream.

Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes.

Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoam437x-vpfe: always assign bpp variable
Nicolas Iooss [Tue, 27 Dec 2016 18:02:36 +0000 (16:02 -0200)]
am437x-vpfe: always assign bpp variable

commit 6ebf75774f823ddbdbd10921006989d4df222f4a upstream.

In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.

Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().

This use of uninitialized variable has been found by compiling the
kernel with clang.

Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver
support for AM437X")

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Handle microMIPS jumps in the same way as MIPS32/MIPS64 jumps
Paul Burton [Mon, 7 Nov 2016 15:07:07 +0000 (15:07 +0000)]
MIPS: Handle microMIPS jumps in the same way as MIPS32/MIPS64 jumps

commit 096a0de427ea333f56f0ee00328cff2a2731bcf1 upstream.

is_jump_ins() checks for plain jump ("j") instructions since commit
e7438c4b893e ("MIPS: Fix sibling call handling in get_frame_info") but
that commit didn't make the same change to the microMIPS code, leaving
it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS
encoding of the jump instruction too such that it behaves consistently.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: e7438c4b893e ("MIPS: Fix sibling call handling in get_frame_info")
Cc: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14533/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Calculate microMIPS ra properly when unwinding the stack
Paul Burton [Mon, 7 Nov 2016 15:07:06 +0000 (15:07 +0000)]
MIPS: Calculate microMIPS ra properly when unwinding the stack

commit bb9bc4689b9c635714fbcd5d335bad9934a7ebfc upstream.

get_frame_info() calculates the offset of the return address within a
stack frame simply by dividing a the bottom 16 bits of the instruction,
treated as a signed integer, by the size of a long. Whilst this works
for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's
incorrect for microMIPS where encodings differ. The result is that we
typically completely fail to unwind the stack on microMIPS.

Fix this by adjusting is_ra_save_ins() to calculate the return address
offset, and take into account the various different encodings there in
the same place as we consider whether an instruction is storing the
ra/$31 register.

With this we are now able to unwind the stack for kernels targetting the
microMIPS ISA, for example we can produce:

    Call Trace:
    [<80109e1f>] show_stack+0x63/0x7c
    [<8011ea17>] __warn+0x9b/0xac
    [<8011ea45>] warn_slowpath_fmt+0x1d/0x20
    [<8013fe53>] register_console+0x43/0x314
    [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec
    [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8
    [<8066c115>] do_early_param+0x75/0xac
    [<801302f9>] parse_args+0x1dd/0x308
    [<8066c459>] parse_early_options+0x25/0x28
    [<8066c48b>] parse_early_param+0x2f/0x38
    [<8066e8cf>] setup_arch+0x113/0x488
    [<8066c4f3>] start_kernel+0x57/0x328
    ---[ end trace 0000000000000000 ]---

Whereas previously we only produced:

    Call Trace:
    [<80109e1f>] show_stack+0x63/0x7c
    ---[ end trace 0000000000000000 ]---

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14532/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Fix is_jump_ins() handling of 16b microMIPS instructions
Paul Burton [Mon, 7 Nov 2016 15:07:05 +0000 (15:07 +0000)]
MIPS: Fix is_jump_ins() handling of 16b microMIPS instructions

commit 67c75057709a6d85c681c78b9b2f9b71191f01a2 upstream.

is_jump_ins() checks 16b instruction fields without verifying that the
instruction is indeed 16b, as is done by is_ra_save_ins() &
is_sp_move_ins(). Add the appropriate check.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Fix get_frame_info() handling of microMIPS function size
Paul Burton [Mon, 7 Nov 2016 15:07:04 +0000 (15:07 +0000)]
MIPS: Fix get_frame_info() handling of microMIPS function size

commit b6c7a324df37bf05ef7a2c1580683cf10d082d97 upstream.

get_frame_info() is meant to iterate over up to the first 128
instructions within a function, but for microMIPS kernels it will not
reach that many instructions unless the function is 512 bytes long since
we calculate the maximum number of instructions to check by dividing the
function length by the 4 byte size of a union mips_instruction. In
microMIPS kernels this won't do since instructions are variable length.

Fix this by instead checking whether the pointer to the current
instruction has reached the end of the function, and use max_insns as a
simple constant to check the number of iterations against.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14530/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Prevent unaligned accesses during stack unwinding
Paul Burton [Mon, 7 Nov 2016 15:07:03 +0000 (15:07 +0000)]
MIPS: Prevent unaligned accesses during stack unwinding

commit a3552dace7d1d0cabf573e88fc3025cb90c4a601 upstream.

During stack unwinding we call a number of functions to determine what
type of instruction we're looking at. The union mips_instruction pointer
provided to them may be pointing at a 2 byte, but not 4 byte, aligned
address & we thus cannot directly access the 4 byte wide members of the
union mips_instruction. To avoid this is_ra_save_ins() copies the
required half-words of the microMIPS instruction to a correctly aligned
union mips_instruction on the stack, which it can then access safely.
The is_jump_ins() & is_sp_move_ins() functions do not correctly perform
this temporary copy, and instead attempt to directly dereference 4 byte
fields which may be misaligned and lead to an address exception.

Fix this by copying the instruction halfwords to a temporary union
mips_instruction in get_frame_info() such that we can provide a 4 byte
aligned union mips_instruction to the is_*_ins() functions and they do
not need to deal with misalignment themselves.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Clear ISA bit correctly in get_frame_info()
Paul Burton [Mon, 7 Nov 2016 15:07:02 +0000 (15:07 +0000)]
MIPS: Clear ISA bit correctly in get_frame_info()

commit ccaf7caf2c73c6db920772bf08bf1d47b2170634 upstream.

get_frame_info() can be called in microMIPS kernels with the ISA bit
already clear. For example this happens when unwind_stack_by_address()
is called because we begin with a PC that has the ISA bit set & subtract
the (odd) offset from the preceding symbol (which does not have the ISA
bit set). Since get_frame_info() unconditionally subtracts 1 from the PC
in microMIPS kernels it incorrectly misaligns the address it then
attempts to access code at, leading to an address error exception.

Fix this by using msk_isa16_mode() to clear the ISA bit, which allows
get_frame_info() to function regardless of whether it is provided with a
PC that has the ISA bit set or not.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Lantiq: Keep ethernet enabled during boot
Felix Fietkau [Thu, 19 Jan 2017 13:20:09 +0000 (14:20 +0100)]
MIPS: Lantiq: Keep ethernet enabled during boot

commit 774f0c6419bb8f9d83901d33582c7fe3ba6a6cb3 upstream.

Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.

This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.

Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: hauke.mehrtens@lantiq.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15078/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: OCTEON: Fix copy_from_user fault handling for large buffers
James Cowgill [Mon, 9 Jan 2017 16:52:28 +0000 (16:52 +0000)]
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers

commit 884b426917e4b3c85f33b382c792a94305dfdd62 upstream.

If copy_from_user is called with a large buffer (>= 128 bytes) and the
userspace buffer refers partially to unreadable memory, then it is
possible for Octeon's copy_from_user to report the wrong number of bytes
have been copied. In the case where the buffer size is an exact multiple
of 128 and the fault occurs in the last 64 bytes, copy_from_user will
report that all the bytes were copied successfully but leave some
garbage in the destination buffer.

The bug is in the main __copy_user_common loop in octeon-memcpy.S where
in the middle of the loop, src and dst are incremented by 128 bytes. The
l_exc_copy fault handler is used after this but that assumes that
"src < THREAD_BUADDR($28)". This is not the case if src has already been
incremented.

Fix by adding an extra fault handler which rewinds the src and dst
pointers 128 bytes before falling though to l_exc_copy.

Thanks to the pwritev test from the strace test suite for originally
highlighting this bug!

Fixes: 5b3b16880f40 ("MIPS: Add Cavium OCTEON processor support ...")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14978/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: BCM47XX: Fix button inversion for Asus WL-500W
Mirko Parthey [Wed, 15 Feb 2017 22:31:30 +0000 (23:31 +0100)]
MIPS: BCM47XX: Fix button inversion for Asus WL-500W

commit bdfdaf1a016ef09cb941f2edad485a713510b8d5 upstream.

The Asus WL-500W buttons are active high, but the software treats them
as active low. Fix the inverted logic.

Fixes: 3be972556fa1 ("MIPS: BCM47XX: Import buttons database from OpenWrt")
Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15295/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoMIPS: Fix special case in 64 bit IP checksumming.
Ralf Baechle [Thu, 26 Jan 2017 01:16:47 +0000 (02:16 +0100)]
MIPS: Fix special case in 64 bit IP checksumming.

commit 66fd848cadaa6be974a8c780fbeb328f0af4d3bd upstream.

For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1,
len = 80, proto = 17, sum = 0x7eae049d there will be a carry when
folding the intermediate 64 bit checksum to 32 bit but the code doesn't
add the carry back to the one's complement sum, thus an incorrect result
will be generated.

Reported-by: Mark Zhang <bomb.zhang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agosamples: move mic/mpssd example code from Documentation
Shuah Khan [Fri, 16 Sep 2016 21:53:52 +0000 (15:53 -0600)]
samples: move mic/mpssd example code from Documentation

commit 6bee835dd54e279f3d3ae2eca92a9c394b4fd028 upstream.

Move mic/mpssd examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build mic/mpssd. It can be built
from top level directory or from mic/mpssd directory:

Run make -C samples/mic/mpssd or cd samples/mic/mpssd; make

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
[backported to 4.4-stable as this code is broken on newer versions of
 gcc and we don't want to break the build for a Documentation sample.
 - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoLinux 4.4.52
Greg Kroah-Hartman [Sun, 26 Feb 2017 10:08:29 +0000 (11:08 +0100)]
Linux 4.4.52

7 years agokvm: vmx: ensure VMCS is current while enabling PML
Peter Feiner [Thu, 7 Jul 2016 21:49:58 +0000 (14:49 -0700)]
kvm: vmx: ensure VMCS is current while enabling PML

commit 4e59516a12a6ef6dcb660cb3a3f70c64bd60cfec upstream.

Between loading the new VMCS and enabling PML, the CPU was unpinned.
If the vCPU thread were migrated to another CPU in the interim (e.g.,
due to preemption or sleeping alloc_page), then the VMWRITEs to enable
PML would target the wrong VMCS -- or no VMCS at all:

  [ 2087.266950] vmwrite error: reg 200e value 3fe1d52000 (err -506126336)
  [ 2087.267062] vmwrite error: reg 812 value 1ff (err 511)
  [ 2087.267125] vmwrite error: reg 401e value 12229c00 (err 304258048)

This patch ensures that the VMCS remains current while enabling PML by
doing the VMWRITEs while the CPU is pinned. Allocation of the PML buffer
is hoisted out of the critical section.

Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Herongguang (Stephen)" <herongguang.he@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoRevert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"
Peter Chen [Fri, 29 Jan 2016 08:47:24 +0000 (16:47 +0800)]
Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"

commit 1bc7da87c7410c6990c3251589e3854e64c55af2 upstream.

This reverts commit e765bfb73ff7.

In the most of cases, we only use one transaction per frame and the
frame rate may be high, If the platforms want to support multiple
transactions but less frame rate cases like [1] and [2], it can set
"non-zero-ttctrl-ttha" at dts.

[1] http://www.spinics.net/lists/linux-usb/msg123125.html
[2] http://www.spinics.net/lists/linux-usb/msg118679.html

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agortlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down
Michael Schenk [Thu, 26 Jan 2017 17:25:04 +0000 (11:25 -0600)]
rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down

commit 575ddce0507789bf9830d089557d2199d2f91865 upstream.

In the function rtl_usb_start we pre-allocate a certain number of urbs
for RX path but they will not be freed when calling rtl_usb_stop. This
results in leaking urbs when doing ifconfig up and down. Eventually,
the system has no available urbs.

Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoblock: fix double-free in the failure path of cgwb_bdi_init()
Tejun Heo [Wed, 8 Feb 2017 20:19:07 +0000 (15:19 -0500)]
block: fix double-free in the failure path of cgwb_bdi_init()

commit 5f478e4ea5c5560b4e40eb136991a09f9389f331 upstream.

When !CONFIG_CGROUP_WRITEBACK, bdi has single bdi_writeback_congested
at bdi->wb_congested.  cgwb_bdi_init() allocates it with kzalloc() and
doesn't do further initialization.  This usually works fine as the
reference count gets bumped to 1 by wb_init() and the put from
wb_exit() releases it.

However, when wb_init() fails, it puts the wb base ref automatically
freeing the wb and the explicit kfree() in cgwb_bdi_init() error path
ends up trying to free the same pointer the second time causing a
double-free.

Fix it by explicitly initilizing the refcnt to 1 and putting the base
ref from cgwb_bdi_destroy().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: a13f35e87140 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agogoldfish: Sanitize the broken interrupt handler
Thomas Gleixner [Wed, 15 Feb 2017 10:11:51 +0000 (11:11 +0100)]
goldfish: Sanitize the broken interrupt handler

commit 6cf18e6927c0b224f972e3042fb85770d63cb9f8 upstream.

This interrupt handler is broken in several ways:

  - It loops forever when the op code is not decodeable

  - It never returns IRQ_HANDLED because the only way to exit the loop
    returns IRQ_NONE unconditionally.

The whole concept of this is broken. Creating devices in an interrupt
handler is beyond any point of sanity.

Make it at least behave halfways sane so accidental users do not have to
deal with a hard to debug lockup.

Fixes: e809c22b8fb028 ("goldfish: add the goldfish virtual bus")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agox86/platform/goldfish: Prevent unconditional loading
Thomas Gleixner [Wed, 15 Feb 2017 10:11:50 +0000 (11:11 +0100)]
x86/platform/goldfish: Prevent unconditional loading

commit 47512cfd0d7a8bd6ab71d01cd89fca19eb2093eb upstream.

The goldfish platform code registers the platform device unconditionally
which causes havoc in several ways if the goldfish_pdev_bus driver is
enabled:

 - Access to the hardcoded physical memory region, which is either not
   available or contains stuff which is completely unrelated.

 - Prevents that the interrupt of the serial port can be requested

 - In case of a spurious interrupt it goes into a infinite loop in the
   interrupt handler of the pdev_bus driver (which needs to be fixed
   seperately).

Add a 'goldfish' command line option to make the registration opt-in when
the platform is compiled in.

I'm seriously grumpy about this engineering trainwreck, which has seven
SOBs from Intel developers for 50 lines of code. And none of them figured
out that this is broken. Impressive fail!

Fixes: ddd70cf93d78 ("goldfish: platform device for x86")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: ark3116: fix register-accessor error handling
Johan Hovold [Thu, 12 Jan 2017 13:56:09 +0000 (14:56 +0100)]
USB: serial: ark3116: fix register-accessor error handling

commit 9fef37d7cf170522fb354d6d0ea6de09b9b16678 upstream.

The current implementation failed to detect short transfers, something
which could lead to bits of the uninitialised heap transfer buffer
leaking to user space.

Fixes: 149fc791a452 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.")
Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: opticon: fix CTS retrieval at open
Johan Hovold [Fri, 13 Jan 2017 12:21:08 +0000 (13:21 +0100)]
USB: serial: opticon: fix CTS retrieval at open

commit 2eee05020a0e7ee7c04422cbacdb07859e45dce6 upstream.

The opticon driver used a control request at open to trigger a CTS
status notification to be sent over the bulk-in pipe. When the driver
was converted to using the generic read implementation, an inverted test
prevented this request from being sent, something which could lead to
TIOCMGET reporting an incorrect CTS state.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7a6ee2b02751 ("USB: opticon: switch to generic read implementation")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: spcp8x5: fix modem-status handling
Johan Hovold [Thu, 12 Jan 2017 13:56:21 +0000 (14:56 +0100)]
USB: serial: spcp8x5: fix modem-status handling

commit 5ed8d41023751bdd3546f2fe4118304357efe8d2 upstream.

Make sure to detect short control transfers and return zero on success
when retrieving the modem status.

This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB:
spcp8x5: add proper modem-status support") has returned TIOCM_LE on
successful retrieval, and avoids leaking bits from the stack on short
transfers.

This also fixes the carrier-detect implementation which since the above
mentioned commit unconditionally has returned true.

Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: ftdi_sio: fix line-status over-reporting
Johan Hovold [Thu, 2 Feb 2017 16:38:35 +0000 (17:38 +0100)]
USB: serial: ftdi_sio: fix line-status over-reporting

commit a6bb1e17a39818b01b55d8e6238b4b5f06d55038 upstream.

FTDI devices use a receive latency timer to periodically empty the
receive buffer and report modem and line status (also when the buffer is
empty).

When a break or error condition is detected the corresponding status
flags will be set on a packet with nonzero data payload and the flags
are not updated until the break is over or further characters are
received.

In order to avoid over-reporting break and error conditions, these flags
must therefore only be processed for packets with payload.

This specifically fixes the case where after an overrun, the error
condition is continuously reported and NULL-characters inserted until
further data is received.

Reported-by: Michael Walle <michael@walle.cc>
Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on
break")
Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: ftdi_sio: fix extreme low-latency setting
Johan Hovold [Wed, 25 Jan 2017 14:35:20 +0000 (15:35 +0100)]
USB: serial: ftdi_sio: fix extreme low-latency setting

commit c6dce2626606ef16434802989466636bc28c1419 upstream.

Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") the FTDI driver has been using a receive latency-timer value of
1 ms instead of the device default of 16 ms.

The latency timer is used to periodically empty a non-full receive
buffer, but a status header is always sent when the timer expires
including when the buffer is empty. This means that a two-byte bulk
message is received every millisecond also for an otherwise idle port as
long as it is open.

Let's restore the pre-2009 behaviour which reduces the rate of the
status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to
62.5 Hz) by not setting ASYNC_LOW_LATENCY by default.

Anyone willing to pay the price for the minimum-latency behaviour should
set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool
such as setserial (e.g. setserial /dev/ttyUSB0 low_latency).

Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove
tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but
to set a minimal latency timer.

Reported-by: Antoine Aubert <a.aubert@overkiz.com>
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: ftdi_sio: fix modem-status error handling
Johan Hovold [Thu, 12 Jan 2017 13:56:11 +0000 (14:56 +0100)]
USB: serial: ftdi_sio: fix modem-status error handling

commit 427c3a95e3e29e65f59d99aaf320d7506f3eed57 upstream.

Make sure to detect short responses when fetching the modem status in
order to avoid parsing uninitialised buffer data and having bits of it
leak to user space.

Note that we still allow for short 1-byte responses.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: cp210x: add new IDs for GE Bx50v3 boards
Ken Lin [Fri, 3 Feb 2017 20:00:24 +0000 (04:00 +0800)]
USB: serial: cp210x: add new IDs for GE Bx50v3 boards

commit 9a593656def0dc2f6c227851e8e602077267a5f1 upstream.

Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design
change.

Signed-off-by: Ken Lin <yungching0725@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoUSB: serial: mos7840: fix another NULL-deref at open
Johan Hovold [Thu, 9 Feb 2017 11:11:41 +0000 (12:11 +0100)]
USB: serial: mos7840: fix another NULL-deref at open

commit 5182c2cf2a9bfb7f066ef0bdd2bb6330b94dd74e upstream.

Fix another NULL-pointer dereference at open should a malicious device
lack an interrupt-in endpoint.

Note that the driver has a broken check for an interrupt-in endpoint
which means that an interrupt URB has never even been submitted.

Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agotty: serial: msm: Fix module autoload
Javier Martinez Canillas [Mon, 2 Jan 2017 14:57:20 +0000 (11:57 -0300)]
tty: serial: msm: Fix module autoload

commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream.

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
$

After this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
alias:          of:N*T*Cqcom,msm-uartdmC*
alias:          of:N*T*Cqcom,msm-uartdm
alias:          of:N*T*Cqcom,msm-uartC*
alias:          of:N*T*Cqcom,msm-uart

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agonet: socket: fix recvmmsg not returning error from sock_error
Maxime Jayat [Tue, 21 Feb 2017 17:35:51 +0000 (18:35 +0100)]
net: socket: fix recvmmsg not returning error from sock_error

[ Upstream commit e623a9e9dec29ae811d11f83d0074ba254aba374 ]

Commit 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path"),
changed the exit path of recvmmsg to always return the datagrams
variable and modified the error paths to set the variable to the error
code returned by recvmsg if necessary.

However in the case sock_error returned an error, the error code was
then ignored, and recvmmsg returned 0.

Change the error path of recvmmsg to correctly return the error code
of sock_error.

The bug was triggered by using recvmmsg on a CAN interface which was
not up. Linux 4.6 and later return 0 in this case while earlier
releases returned -ENETDOWN.

Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path")
Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoip: fix IP_CHECKSUM handling
Paolo Abeni [Tue, 21 Feb 2017 08:33:18 +0000 (09:33 +0100)]
ip: fix IP_CHECKSUM handling

[ Upstream commit ca4ef4574f1ee5252e2cd365f8f5d5bafd048f32 ]

The skbs processed by ip_cmsg_recv() are not guaranteed to
be linear e.g. when sending UDP packets over loopback with
MSGMORE.
Using csum_partial() on [potentially] the whole skb len
is dangerous; instead be on the safe side and use skb_checksum().

Thanks to syzkaller team to detect the issue and provide the
reproducer.

v1 -> v2:
 - move the variable declaration in a tighter scope

Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoirda: Fix lockdep annotations in hashbin_delete().
David S. Miller [Fri, 17 Feb 2017 21:19:39 +0000 (16:19 -0500)]
irda: Fix lockdep annotations in hashbin_delete().

[ Upstream commit 4c03b862b12f980456f9de92db6d508a4999b788 ]

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agodccp: fix freeing skb too early for IPV6_RECVPKTINFO
Andrey Konovalov [Thu, 16 Feb 2017 16:22:46 +0000 (17:22 +0100)]
dccp: fix freeing skb too early for IPV6_RECVPKTINFO

[ Upstream commit 5edabca9d4cff7f1f2b68f0bac55ef99d9798ba4 ]

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed.
0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now
simply consumed

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agopacket: Do not call fanout_release from atomic contexts
Anoob Soman [Wed, 15 Feb 2017 20:25:39 +0000 (20:25 +0000)]
packet: Do not call fanout_release from atomic contexts

[ Upstream commit 2bd624b4611ffee36422782d16e1c944d1351e98 ]

Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a
netdev"), unfortunately, introduced the following issues.

1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside
rcu_read-side critical section. rcu_read_lock disables preemption, most often,
which prohibits calling sleeping functions.

[  ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section!
[  ]
[  ] rcu_scheduler_active = 1, debug_locks = 0
[  ] 4 locks held by ovs-vswitchd/1969:
[  ]  #0:  (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40
[  ]  #1:  (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch]
[  ]  #2:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20
[  ]  #3:  (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0
[  ]
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110
[  ]  [<ffffffff810a2da7>] ___might_sleep+0x57/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30
[  ]  [<ffffffff81186e88>] ? printk+0x4d/0x4f
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock).
"sleeping function called from invalid context"

[  ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[  ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810a2f52>] ___might_sleep+0x202/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

3. calling dev_remove_pack(&fanout->prot_hook), from inside
spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack()
-> synchronize_net(), which might sleep.

[  ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff81186274>] __schedule_bug+0x64/0x73
[  ]  [<ffffffff8162b8cb>] __schedule+0x6b/0xd10
[  ]  [<ffffffff8162c5db>] schedule+0x6b/0x80
[  ]  [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410
[  ]  [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810
[  ]  [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10
[  ]  [<ffffffff8154eab5>] synchronize_net+0x35/0x50
[  ]  [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20
[  ]  [<ffffffff8161077e>] fanout_release+0xbe/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

4. fanout_release() races with calls from different CPU.

To fix the above problems, remove the call to fanout_release() under
rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and
netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order
to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to
__fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure
fanout->prot_hook is removed as well.

Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agopacket: fix races in fanout_add()
Eric Dumazet [Tue, 14 Feb 2017 17:03:51 +0000 (09:03 -0800)]
packet: fix races in fanout_add()

[ Upstream commit d199fab63c11998a602205f7ee7ff7c05c97164b ]

Multiple threads can call fanout_add() at the same time.

We need to grab fanout_mutex earlier to avoid races that could
lead to one thread freeing po->rollover that was set by another thread.

Do the same in fanout_release(), for peace of mind, and to help us
finding lockdep issues earlier.

Fixes: dc99f600698d ("packet: Add fanout support.")
Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agonet/llc: avoid BUG_ON() in skb_orphan()
Eric Dumazet [Sun, 12 Feb 2017 22:03:52 +0000 (14:03 -0800)]
net/llc: avoid BUG_ON() in skb_orphan()

[ Upstream commit 8b74d439e1697110c5e5c600643e823eb1dd0762 ]

It seems nobody used LLC since linux-3.12.

Fortunately fuzzers like syzkaller still know how to run this code,
otherwise it would be no fun.

Setting skb->sk without skb->destructor leads to all kinds of
bugs, we now prefer to be very strict about it.

Ideally here we would use skb_set_owner() but this helper does not exist yet,
only CAN seems to have a private helper for that.

Fixes: 376c7311bdb6 ("net: add a temporary sanity check in skb_orphan()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoblk-mq: really fix plug list flushing for nomerge queues
Omar Sandoval [Thu, 2 Jun 2016 05:18:48 +0000 (22:18 -0700)]
blk-mq: really fix plug list flushing for nomerge queues

commit 87c279e613f848c691111b29d49de8df3f4f56da upstream.

Commit 0809e3ac6231 ("block: fix plug list flushing for nomerge queues")
updated blk_mq_make_request() to set request_count even when
blk_queue_nomerges() returns true. However, blk_mq_make_request() only
does limited plugging and doesn't use request_count;
blk_sq_make_request() is the one that should have been fixed. Do that
and get rid of the unnecessary work in the mq version.

Fixes: 0809e3ac6231 ("block: fix plug list flushing for nomerge queues")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agortc: interface: ignore expired timers when enqueuing new timers
Colin Ian King [Mon, 16 May 2016 16:22:54 +0000 (17:22 +0100)]
rtc: interface: ignore expired timers when enqueuing new timers

commit 2b2f5ff00f63847d95adad6289bd8b05f5983dd5 upstream.

This patch fixes a RTC wakealarm issue, namely, the event fires during
hibernate and is not cleared from the list, causing hwclock to block.

The current enqueuing does not trigger an alarm if any expired timers
already exist on the timerqueue. This can occur when a RTC wake alarm
is used to wake a machine out of hibernate and the resumed state has
old expired timers that have not been removed from the timer queue.
This fix skips over any expired timers and triggers an alarm if there
are no pending timers on the timerqueue. Note that the skipped expired
timer will get reaped later on, so there is no need to clean it up
immediately.

The issue can be reproduced by putting a machine into hibernate and
waking it with the RTC wakealarm.  Running the example RTC test program
from tools/testing/selftests/timers/rtctest.c after the hibernate will
block indefinitely.  With the fix, it no longer blocks after the
hibernate resume.

BugLink: http://bugs.launchpad.net/bugs/1333569
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agortlwifi: rtl_usb: Fix missing entry in USB driver's private data
Larry Finger [Wed, 21 Dec 2016 17:18:55 +0000 (11:18 -0600)]
rtlwifi: rtl_usb: Fix missing entry in USB driver's private data

commit 60f59ce0278557f7896d5158ae6d12a4855a72cc upstream.

These drivers need to be able to reference "struct ieee80211_hw" from
the driver's private data, and vice versa. The USB driver failed to
store the address of ieee80211_hw in the private data. Although this
bug has been present for a long time, it was not exposed until
commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save").

Fixes: ba9f93f82aba ("rtlwifi: Fix enter/exit power_save")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoLinux 4.4.51
Greg Kroah-Hartman [Thu, 23 Feb 2017 16:43:20 +0000 (17:43 +0100)]
Linux 4.4.51

7 years agommc: core: fix multi-bit bus width without high-speed mode
Anssi Hannula [Mon, 13 Feb 2017 11:46:41 +0000 (13:46 +0200)]
mmc: core: fix multi-bit bus width without high-speed mode

commit 3d4ef329757cfd5e0b23cce97cdeca7e2df89c99 upstream.

Commit 577fb13199b1 ("mmc: rework selection of bus speed mode")
refactored bus width selection code to mmc_select_bus_width().

However, it also altered the behavior to not call the selection code in
non-high-speed modes anymore.

This causes 1-bit mode to always be used when the high-speed mode is not
enabled, even though 4-bit and 8-bit bus are valid bus widths in the
backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed
Modes in JEDEC 84-B50). This results in a significant regression in
transfer speeds.

Fix the code to allow 4-bit and 8-bit widths even without high-speed
mode, as before.

Tested with a Zynq-7000 PicoZed 7020 board.

Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[anssi.hannula@bitwise.fi: backported for the different err variable
 check on v4.4 and tested]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agobcache: Make gc wakeup sane, remove set_task_state()
Kent Overstreet [Thu, 27 Oct 2016 03:31:17 +0000 (20:31 -0700)]
bcache: Make gc wakeup sane, remove set_task_state()

commit be628be09563f8f6e81929efbd7cf3f45c344416 upstream.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agontb_transport: Pick an unused queue
Thomas VanSelus [Mon, 13 Feb 2017 22:46:26 +0000 (16:46 -0600)]
ntb_transport: Pick an unused queue

commit 8fcd0950c021d7be8493280541332b924b9de962 upstream.

Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.

Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoNTB: ntb_transport: fix debugfs_remove_recursive
Allen Hubbe [Tue, 27 Dec 2016 22:57:04 +0000 (17:57 -0500)]
NTB: ntb_transport: fix debugfs_remove_recursive

commit dd62245e73de9138333cb0e7a42c8bc1215c3ce6 upstream.

The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it.  This removes the top-level
directory last, after sub-level directories have been cleaned up.

Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoprintk: use rcuidle console tracepoint
Sergey Senozhatsky [Sat, 18 Feb 2017 11:42:54 +0000 (03:42 -0800)]
printk: use rcuidle console tracepoint

commit fc98c3c8c9dcafd67adcce69e6ce3191d5306c9c upstream.

Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:

  hw-breakpoint: Failed to enable monitor mode on CPU 0.
  hw-breakpoint: CPU 0 failed to disable vector catch

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-rc8-next-20170215+ #119 Not tainted
  -------------------------------
  ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  RCU used illegally from idle CPU!
  rcu_scheduler_active = 2, debug_locks = 0
  RCU used illegally from extended quiescent state!
  2 locks held by swapper/0/0:
   #0:  (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
   #1:  (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
  Hardware name: Generic OMAP4 (Flattened Device Tree)
    console_unlock
    vprintk_emit
    vprintk_default
    printk
    reset_ctrl_regs
    dbg_cpu_pm_notify
    notifier_call_chain
    cpu_pm_exit
    omap_enter_idle_coupled
    cpuidle_enter_state
    cpuidle_enter_state_coupled
    do_idle
    cpu_startup_entry
    start_kernel

This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".

Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
Kees Cook [Thu, 16 Feb 2017 00:44:37 +0000 (01:44 +0100)]
ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()

commit 9e3440481845b2ec22508f60837ee2cab2b6054f upstream.

The 64-bit get_user() wasn't clearing the high word due to a typo in the
error handler. The exception handler entry was already correct, though.
Noticed during recent usercopy test additions in lib/test_user_copy.c.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agofutex: Move futex_init() to core_initcall
Yang Yang [Fri, 30 Dec 2016 08:17:55 +0000 (16:17 +0800)]
futex: Move futex_init() to core_initcall

commit 25f71d1c3e98ef0e52371746220d66458eac75bc upstream.

The UEVENT user mode helper is enabled before the initcalls are executed
and is available when the root filesystem has been mounted.

The user mode helper is triggered by device init calls and the executable
might use the futex syscall.

futex_init() is marked __initcall which maps to device_initcall, but there
is no guarantee that futex_init() is invoked _before_ the first device init
call which triggers the UEVENT user mode helper.

If the user mode helper uses the futex syscall before futex_init() then the
syscall crashes with a NULL pointer dereference because the futex subsystem
has not been initialized yet.

Move futex_init() to core_initcall so futexes are initialized before the
root filesystem is mounted and the usermode helper becomes available.

[ tglx: Rewrote changelog ]

Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: jiang.biao2@zte.com.cn
Cc: jiang.zhengxiong@zte.com.cn
Cc: zhong.weidong@zte.com.cn
Cc: deng.huali@zte.com.cn
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agodrm/dp/mst: fix kernel oops when turning off secondary monitor
Pierre-Louis Bossart [Tue, 14 Feb 2017 12:49:21 +0000 (14:49 +0200)]
drm/dp/mst: fix kernel oops when turning off secondary monitor

commit bb08c04dc867b5f392caec635c097d5d5fcd8c9f upstream.

100% reproducible issue found on SKL SkullCanyon NUC with two external
DP daisy-chained monitors in DP/MST mode. When turning off or changing
the input of the second monitor the machine stops with a kernel
oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly.

This issue is traced to an inconsistent control flow in
drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the
same time as 'req_payload.num_slots' is set to zero, but the pointer is
dereferenced even when req_payload.num_slot is zero.

The problematic dereference was introduced in commit dfda0df34
("drm/mst: rework payload table allocation to conform better") and may
impact all versions since v3.18

The fix suggested by Chris Wilson removes the kernel oops and was found to
work well after 10mn of monkey-testing with the second monitor power and
input buttons

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990
Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agodrm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
Michel Dänzer [Wed, 15 Feb 2017 02:28:45 +0000 (11:28 +0900)]
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor

commit d74c67dd7800fc7aae381f272875c337f268806c upstream.

The crtc_h/vdisplay fields may not match the CRTC viewport dimensions
with special modes such as interlaced ones.

Fixes the HW cursor disappearing in the bottom half of the screen with
interlaced modes.

Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds")
Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoInput: elan_i2c - add ELAN0605 to the ACPI table
IHARA Hiroka [Mon, 13 Feb 2017 02:34:53 +0000 (18:34 -0800)]
Input: elan_i2c - add ELAN0605 to the ACPI table

commit 722c5ac708b4f5c1fcfad5fed4c95234c8b06590 upstream.

ELAN0605 has been confirmed to be a variant of ELAN0600, which is
blacklisted in the hid-core to be managed by elan_i2c. This device can be
found in Lenovo ideapad 310s (80U4000).

Signed-off-by: Hiroka IHARA <ihara_h@live.jp>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoFix missing sanity check in /dev/sg
Al Viro [Sun, 19 Feb 2017 07:15:27 +0000 (07:15 +0000)]
Fix missing sanity check in /dev/sg

commit 137d01df511b3afe1f05499aea05f3bafc0fb221 upstream.

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoscsi: don't BUG_ON() empty DMA transfers
Johannes Thumshirn [Tue, 31 Jan 2017 09:16:00 +0000 (10:16 +0100)]
scsi: don't BUG_ON() empty DMA transfers

commit fd3fc0b4d7305fa7246622dcc0dec69c42443f45 upstream.

Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.

Found by Dmitry Vyukov and syzkaller.

[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
  cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
  might still be a cause of excessive log spamming.

  NOTE! If this warning ever triggers, we may end up leaking resources,
  since this doesn't bother to try to clean the command up. So this
  WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
  much worse.

  People really need to stop using BUG_ON() for "this shouldn't ever
  happen". It makes pretty much any bug worse.     - Linus ]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agofuse: fix use after free issue in fuse_dev_do_read()
Sahitya Tummala [Wed, 8 Feb 2017 15:00:56 +0000 (20:30 +0530)]
fuse: fix use after free issue in fuse_dev_do_read()

commit 6ba4d2722d06960102c981322035239cd66f7316 upstream.

There is a potential race between fuse_dev_do_write()
and request_wait_answer() contexts as shown below:

TASK 1:
__fuse_request_send():
  |--spin_lock(&fiq->waitq.lock);
  |--queue_request();
  |--spin_unlock(&fiq->waitq.lock);
  |--request_wait_answer():
       |--if (test_bit(FR_SENT, &req->flags))
       <gets pre-empted after it is validated true>
                                   TASK 2:
                                   fuse_dev_do_write():
                                     |--clears bit FR_SENT,
                                     |--request_end():
                                        |--sets bit FR_FINISHED
                                        |--spin_lock(&fiq->waitq.lock);
                                        |--list_del_init(&req->intr_entry);
                                        |--spin_unlock(&fiq->waitq.lock);
                                        |--fuse_put_request();
       |--queue_interrupt();
       <request gets queued to interrupts list>
            |--wake_up_locked(&fiq->waitq);
       |--wait_event_freezable();
       <as FR_FINISHED is set, it returns and then
       the caller frees this request>

Now, the next fuse_dev_do_read(), see interrupts list is not empty
and then calls fuse_read_interrupt() which tries to access the request
which is already free'd and gets the below crash:

[11432.401266] Unable to handle kernel paging request at virtual address
6b6b6b6b6b6b6b6b
...
[11432.418518] Kernel BUG at ffffff80083720e0
[11432.456168] PC is at __list_del_entry+0x6c/0xc4
[11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474
...
[11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4
[11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474
[11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78
[11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8
[11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108
[11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94

As FR_FINISHED bit is set before deleting the intr_entry with input
queue lock in request completion path, do the testing of this flag and
queueing atomically with the same lock in queue_interrupt().

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agosiano: make it work again with CONFIG_VMAP_STACK
Mauro Carvalho Chehab [Tue, 14 Feb 2017 19:47:57 +0000 (17:47 -0200)]
siano: make it work again with CONFIG_VMAP_STACK

commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream.

Reported as a Kaffeine bug:
https://bugs.kde.org/show_bug.cgi?id=375811

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

On Kernel 4.9, the default is to not accept DMA on stack anymore
on x86 architecture. On other architectures, this has been a
requirement since Kernel 2.2. So, after this patch, this driver
should likely work fine on all archs.

Tested with USB ID 2040:5510: Hauppauge Windham

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agovfs: fix uninitialized flags in splice_to_pipe()
Miklos Szeredi [Thu, 16 Feb 2017 16:49:02 +0000 (17:49 +0100)]
vfs: fix uninitialized flags in splice_to_pipe()

commit 5a81e6a171cdbd1fa8bc1fdd80c23d3d71816fac upstream.

Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the
unused part of the pipe ring buffer.  Previously splice_to_pipe() left
the flags value alone, which could result in incorrect behavior.

Uninitialized flags appears to have been there from the introduction of
the splice syscall.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoLinux 4.4.50
Greg Kroah-Hartman [Sat, 18 Feb 2017 15:39:37 +0000 (16:39 +0100)]
Linux 4.4.50

7 years agol2tp: do not use udp_ioctl()
Eric Dumazet [Fri, 10 Feb 2017 00:15:52 +0000 (16:15 -0800)]
l2tp: do not use udp_ioctl()

[ Upstream commit 72fb96e7bdbbdd4421b0726992496531060f3636 ]

udp_ioctl(), as its name suggests, is used by UDP protocols,
but is also used by L2TP :(

L2TP should use its own handler, because it really does not
look the same.

SIOCINQ for instance should not assume UDP checksum or headers.

Thanks to Andrey and syzkaller team for providing the report
and a nice reproducer.

While crashes only happen on recent kernels (after commit
7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")), this
probably needs to be backported to older kernels.

Fixes: 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")
Fixes: 85584672012e ("udp: Fix udp_poll() and ioctl()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoping: fix a null pointer dereference
WANG Cong [Tue, 7 Feb 2017 20:59:46 +0000 (12:59 -0800)]
ping: fix a null pointer dereference

[ Upstream commit 73d2c6678e6c3af7e7a42b1e78cd0211782ade32 ]

Andrey reported a kernel crash:

  general protection fault: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 2 PID: 3880 Comm: syz-executor1 Not tainted 4.10.0-rc6+ #124
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff880060048040 task.stack: ffff880069be8000
  RIP: 0010:ping_v4_push_pending_frames net/ipv4/ping.c:647 [inline]
  RIP: 0010:ping_v4_sendmsg+0x1acd/0x23f0 net/ipv4/ping.c:837
  RSP: 0018:ffff880069bef8b8 EFLAGS: 00010206
  RAX: dffffc0000000000 RBX: ffff880069befb90 RCX: 0000000000000000
  RDX: 0000000000000018 RSI: ffff880069befa30 RDI: 00000000000000c2
  RBP: ffff880069befbb8 R08: 0000000000000008 R09: 0000000000000000
  R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069befab0
  R13: ffff88006c624a80 R14: ffff880069befa70 R15: 0000000000000000
  FS:  00007f6f7c716700(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000004a6f28 CR3: 000000003a134000 CR4: 00000000000006e0
  Call Trace:
   inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
   sock_sendmsg_nosec net/socket.c:635 [inline]
   sock_sendmsg+0xca/0x110 net/socket.c:645
   SYSC_sendto+0x660/0x810 net/socket.c:1687
   SyS_sendto+0x40/0x50 net/socket.c:1655
   entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because we miss a check for NULL pointer for skb_peek() when
the queue is empty. Other places already have the same check.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agopacket: round up linear to header len
Willem de Bruijn [Tue, 7 Feb 2017 20:57:21 +0000 (15:57 -0500)]
packet: round up linear to header len

[ Upstream commit 57031eb794906eea4e1c7b31dc1e2429c0af0c66 ]

Link layer protocols may unconditionally pull headers, as Ethernet
does in eth_type_trans. Ensure that the entire link layer header
always lies in the skb linear segment. tpacket_snd has such a check.
Extend this to packet_snd.

Variable length link layer headers complicate the computation
somewhat. Here skb->len may be smaller than dev->hard_header_len.

Round up the linear length to be at least as long as the smallest of
the two.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agonet: introduce device min_header_len
Willem de Bruijn [Tue, 7 Feb 2017 20:57:20 +0000 (15:57 -0500)]
net: introduce device min_header_len

[ Upstream commit 217e6fa24ce28ec87fca8da93c9016cb78028612 ]

The stack must not pass packets to device drivers that are shorter
than the minimum link layer header length.

Previously, packet sockets would drop packets smaller than or equal
to dev->hard_header_len, but this has false positives. Zero length
payload is used over Ethernet. Other link layer protocols support
variable length headers. Support for validation of these protocols
removed the min length check for all protocols.

Introduce an explicit dev->min_header_len parameter and drop all
packets below this value. Initially, set it to non-zero only for
Ethernet and loopback. Other protocols can follow in a patch to
net-next.

Fixes: 9ed988cd5915 ("packet: validate variable length ll headers")
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agosit: fix a double free on error path
WANG Cong [Wed, 8 Feb 2017 18:02:13 +0000 (10:02 -0800)]
sit: fix a double free on error path

[ Upstream commit d7426c69a1942b2b9b709bf66b944ff09f561484 ]

Dmitry reported a double free in sit_init_net():

  kernel BUG at mm/percpu.c:689!
  invalid opcode: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 0 PID: 15692 Comm: syz-executor1 Not tainted 4.10.0-rc6-next-20170206 #1
  Hardware name: Google Google Compute Engine/Google Compute Engine,
  BIOS Google 01/01/2011
  task: ffff8801c9cc27c0 task.stack: ffff88017d1d8000
  RIP: 0010:pcpu_free_area+0x68b/0x810 mm/percpu.c:689
  RSP: 0018:ffff88017d1df488 EFLAGS: 00010046
  RAX: 0000000000010000 RBX: 00000000000007c0 RCX: ffffc90002829000
  RDX: 0000000000010000 RSI: ffffffff81940efb RDI: ffff8801db841d94
  RBP: ffff88017d1df590 R08: dffffc0000000000 R09: 1ffffffff0bb3bdd
  R10: dffffc0000000000 R11: 00000000000135dd R12: ffff8801db841d80
  R13: 0000000000038e40 R14: 00000000000007c0 R15: 00000000000007c0
  FS:  00007f6ea608f700(0000) GS:ffff8801dbe00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000000002000aff8 CR3: 00000001c8d44000 CR4: 00000000001426f0
  DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
  Call Trace:
   free_percpu+0x212/0x520 mm/percpu.c:1264
   ipip6_dev_free+0x43/0x60 net/ipv6/sit.c:1335
   sit_init_net+0x3cb/0xa10 net/ipv6/sit.c:1831
   ops_init+0x10a/0x530 net/core/net_namespace.c:115
   setup_net+0x2ed/0x690 net/core/net_namespace.c:291
   copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396
   create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106
   unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
   SYSC_unshare kernel/fork.c:2281 [inline]
   SyS_unshare+0x64e/0xfc0 kernel/fork.c:2231
   entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because when tunnel->dst_cache init fails, we free dev->tstats
once in ipip6_tunnel_init() and twice in sit_init_net(). This looks
redundant but its ndo_uinit() does not seem enough to clean up everything
here. So avoid this by setting dev->tstats to NULL after the first free,
at least for -net.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agosctp: avoid BUG_ON on sctp_wait_for_sndbuf
Marcelo Ricardo Leitner [Mon, 6 Feb 2017 20:10:31 +0000 (18:10 -0200)]
sctp: avoid BUG_ON on sctp_wait_for_sndbuf

[ Upstream commit 2dcab598484185dea7ec22219c76dcdd59e3cb90 ]

Alexander Popov reported that an application may trigger a BUG_ON in
sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is
waiting on it to queue more data and meanwhile another thread peels off
the association being used by the first thread.

This patch replaces the BUG_ON call with a proper error handling. It
will return -EPIPE to the original sendmsg call, similarly to what would
have been done if the association wasn't found in the first place.

Acked-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agomlx4: Invoke softirqs after napi_reschedule
Benjamin Poirier [Mon, 6 Feb 2017 18:14:31 +0000 (10:14 -0800)]
mlx4: Invoke softirqs after napi_reschedule

[ Upstream commit bd4ce941c8d5b862b2f83364be5dbe8fc8ab48f8 ]

mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run
in a deterministic time frame and the following message may be logged:
NOHZ: local_softirq_pending 08

The problem is the same as what was described in commit ec13ee80145c
("virtio_net: invoke softirqs after __napi_schedule") and this patch
applies the same fix to mlx4.

Fixes: 07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agomacvtap: read vnet_hdr_size once
Willem de Bruijn [Fri, 3 Feb 2017 23:20:49 +0000 (18:20 -0500)]
macvtap: read vnet_hdr_size once

[ Upstream commit 837585a5375c38d40361cfe64e6fd11e1addb936 ]

When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.

Macvtap functions read the value once, but unless READ_ONCE is used,
the compiler may ignore this and read multiple times. Enforce a single
read and locally cached value to avoid updates between test and use.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agotun: read vnet_hdr_sz once
Willem de Bruijn [Fri, 3 Feb 2017 23:20:48 +0000 (18:20 -0500)]
tun: read vnet_hdr_sz once

[ Upstream commit e1edab87faf6ca30cd137e0795bc73aa9a9a22ec ]

When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.

Read this value once and cache locally, as it can be updated between
the test and use (TOCTOU).

Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agotcp: avoid infinite loop in tcp_splice_read()
Eric Dumazet [Fri, 3 Feb 2017 22:59:38 +0000 (14:59 -0800)]
tcp: avoid infinite loop in tcp_splice_read()

[ Upstream commit ccf7abb93af09ad0868ae9033d1ca8108bdaec82 ]

Splicing from TCP socket is vulnerable when a packet with URG flag is
received and stored into receive queue.

__tcp_splice_read() returns 0, and sk_wait_data() immediately
returns since there is the problematic skb in queue.

This is a nice way to burn cpu (aka infinite loop) and trigger
soft lockups.

Again, this gem was found by syzkaller tool.

Fixes: 9c55e01c0cc8 ("[TCP]: Splice receive support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoipv6: tcp: add a missing tcp_v6_restore_cb()
Eric Dumazet [Mon, 6 Feb 2017 04:23:22 +0000 (20:23 -0800)]
ipv6: tcp: add a missing tcp_v6_restore_cb()

[ Upstream commit ebf6c9cb23d7e56eec8575a88071dec97ad5c6e2 ]

Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl()

A similar bug was fixed in commit 8ce48623f0cf ("ipv6: tcp: restore
IP6CB for pktoptions skbs"), but I missed another spot.

tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts

Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoip6_gre: fix ip6gre_err() invalid reads
Eric Dumazet [Sun, 5 Feb 2017 07:18:55 +0000 (23:18 -0800)]
ip6_gre: fix ip6gre_err() invalid reads

[ Upstream commit 7892032cfe67f4bde6fc2ee967e45a8fbaf33756 ]

Andrey Konovalov reported out of bound accesses in ip6gre_err()

If GRE flags contains GRE_KEY, the following expression
*(((__be32 *)p) + (grehlen / 4) - 1)

accesses data ~40 bytes after the expected point, since
grehlen includes the size of IPv6 headers.

Let's use a "struct gre_base_hdr *greh" pointer to make this
code more readable.

p[1] becomes greh->protocol.
grhlen is the GRE header length.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agonetlabel: out of bound access in cipso_v4_validate()
Eric Dumazet [Fri, 3 Feb 2017 08:03:26 +0000 (00:03 -0800)]
netlabel: out of bound access in cipso_v4_validate()

[ Upstream commit d71b7896886345c53ef1d84bda2bc758554f5d61 ]

syzkaller found another out of bound access in ip_options_compile(),
or more exactly in cipso_v4_validate()

Fixes: 20e2a8648596 ("cipso: handle CIPSO options correctly when NetLabel is disabled")
Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoipv4: keep skb->dst around in presence of IP options
Eric Dumazet [Sat, 4 Feb 2017 19:16:52 +0000 (11:16 -0800)]
ipv4: keep skb->dst around in presence of IP options

[ Upstream commit 34b2cef20f19c87999fff3da4071e66937db9644 ]

Andrey Konovalov got crashes in __ip_options_echo() when a NULL skb->dst
is accessed.

ipv4_pktinfo_prepare() should not drop the dst if (evil) IP options
are present.

We could refine the test to the presence of ts_needtime or srr,
but IP options are not often used, so let's be conservative.

Thanks to syzkaller team for finding this bug.

Fixes: d826eb14ecef ("ipv4: PKTINFO doesnt need dst reference")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agonet: use a work queue to defer net_disable_timestamp() work
Eric Dumazet [Thu, 2 Feb 2017 18:31:35 +0000 (10:31 -0800)]
net: use a work queue to defer net_disable_timestamp() work

[ Upstream commit 5fa8bbda38c668e56b0c6cdecced2eac2fe36dec ]

Dmitry reported a warning [1] showing that we were calling
net_disable_timestamp() -> static_key_slow_dec() from a non
process context.

Grabbing a mutex while holding a spinlock or rcu_read_lock()
is not allowed.

As Cong suggested, we now use a work queue.

It is possible netstamp_clear() exits while netstamp_needed_deferred
is not zero, but it is probably not worth trying to do better than that.

netstamp_needed_deferred atomic tracks the exact number of deferred
decrements.

[1]
[ INFO: suspicious RCU usage. ]
4.10.0-rc5+ #192 Not tainted
-------------------------------
./include/linux/rcupdate.h:561 Illegal context switch in RCU read-side
critical section!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 0
2 locks held by syz-executor14/23111:
 #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>] lock_sock
include/net/sock.h:1454 [inline]
 #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>]
rawv6_sendmsg+0x1e65/0x3ec0 net/ipv6/raw.c:919
 #1:  (rcu_read_lock){......}, at: [<ffffffff83ae2678>] nf_hook
include/linux/netfilter.h:201 [inline]
 #1:  (rcu_read_lock){......}, at: [<ffffffff83ae2678>]
__ip6_local_out+0x258/0x840 net/ipv6/output_core.c:160

stack backtrace:
CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
 lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4452
 rcu_preempt_sleep_check include/linux/rcupdate.h:560 [inline]
 ___might_sleep+0x560/0x650 kernel/sched/core.c:7748
 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739
 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752
 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060
 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149
 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174
 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728
 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403
 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441
 sk_destruct+0x47/0x80 net/core/sock.c:1460
 __sk_free+0x57/0x230 net/core/sock.c:1468
 sock_wfree+0xae/0x120 net/core/sock.c:1645
 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655
 skb_release_all+0x15/0x60 net/core/skbuff.c:668
 __kfree_skb+0x15/0x20 net/core/skbuff.c:684
 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705
 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
 inet_frag_put include/net/inet_frag.h:133 [inline]
 nf_ct_frag6_gather+0x1106/0x3840
net/ipv6/netfilter/nf_conntrack_reasm.c:617
 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline]
 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
 nf_hook include/linux/netfilter.h:212 [inline]
 __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160
 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline]
 rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 sock_write_iter+0x326/0x600 net/socket.c:848
 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695
 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872
 vfs_writev+0x87/0xc0 fs/read_write.c:911
 do_writev+0x110/0x2c0 fs/read_write.c:944
 SYSC_writev fs/read_write.c:1017 [inline]
 SyS_writev+0x27/0x30 fs/read_write.c:1014
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x445559
RSP: 002b:00007f6f46fceb58 EFLAGS: 00000292 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000445559
RDX: 0000000000000001 RSI: 0000000020f1eff0 RDI: 0000000000000005
RBP: 00000000006e19c0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000700000
R13: 0000000020f59000 R14: 0000000000000015 R15: 0000000000020400
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:752
in_atomic(): 1, irqs_disabled(): 0, pid: 23111, name: syz-executor14
INFO: lockdep is turned off.
CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
 ___might_sleep+0x47e/0x650 kernel/sched/core.c:7780
 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739
 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752
 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060
 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149
 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174
 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728
 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403
 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441
 sk_destruct+0x47/0x80 net/core/sock.c:1460
 __sk_free+0x57/0x230 net/core/sock.c:1468
 sock_wfree+0xae/0x120 net/core/sock.c:1645
 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655
 skb_release_all+0x15/0x60 net/core/skbuff.c:668
 __kfree_skb+0x15/0x20 net/core/skbuff.c:684
 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705
 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
 inet_frag_put include/net/inet_frag.h:133 [inline]
 nf_ct_frag6_gather+0x1106/0x3840
net/ipv6/netfilter/nf_conntrack_reasm.c:617
 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline]
 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
 nf_hook include/linux/netfilter.h:212 [inline]
 __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160
 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline]
 rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 sock_write_iter+0x326/0x600 net/socket.c:848
 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695
 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872
 vfs_writev+0x87/0xc0 fs/read_write.c:911
 do_writev+0x110/0x2c0 fs/read_write.c:944
 SYSC_writev fs/read_write.c:1017 [inline]
 SyS_writev+0x27/0x30 fs/read_write.c:1014
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x445559

Fixes: b90e5794c5bd ("net: dont call jump_label_dec from irq context")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agotcp: fix 0 divide in __tcp_select_window()
Eric Dumazet [Wed, 1 Feb 2017 16:33:53 +0000 (08:33 -0800)]
tcp: fix 0 divide in __tcp_select_window()

[ Upstream commit 06425c308b92eaf60767bc71d359f4cbc7a561f8 ]

syszkaller fuzzer was able to trigger a divide by zero, when
TCP window scaling is not enabled.

SO_RCVBUF can be used not only to increase sk_rcvbuf, also
to decrease it below current receive buffers utilization.

If mss is negative or 0, just return a zero TCP window.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()
Dan Carpenter [Wed, 1 Feb 2017 08:46:32 +0000 (11:46 +0300)]
ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()

[ Upstream commit 63117f09c768be05a0bf465911297dc76394f686 ]

Casting is a high precedence operation but "off" and "i" are in terms of
bytes so we need to have some parenthesis here.

Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoipv6: fix ip6_tnl_parse_tlv_enc_lim()
Eric Dumazet [Tue, 24 Jan 2017 00:43:06 +0000 (16:43 -0800)]
ipv6: fix ip6_tnl_parse_tlv_enc_lim()

[ Upstream commit fbfa743a9d2a0ffa24251764f10afc13eb21e739 ]

This function suffers from multiple issues.

First one is that pskb_may_pull() may reallocate skb->head,
so the 'raw' pointer needs either to be reloaded or not used at all.

Second issue is that NEXTHDR_DEST handling does not validate
that the options are present in skb->data, so we might read
garbage or access non existent memory.

With help from Willem de Bruijn.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agocan: Fix kernel panic at security_sock_rcv_skb
Eric Dumazet [Fri, 27 Jan 2017 16:11:44 +0000 (08:11 -0800)]
can: Fix kernel panic at security_sock_rcv_skb

[ Upstream commit f1712c73714088a7252d276a57126d56c7d37e64 ]

Zhang Yanmin reported crashes [1] and provided a patch adding a
synchronize_rcu() call in can_rx_unregister()

The main problem seems that the sockets themselves are not RCU
protected.

If CAN uses RCU for delivery, then sockets should be freed only after
one RCU grace period.

Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's
ease stable backports with the following fix instead.

[1]
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0

Call Trace:
 <IRQ>
 [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60
 [<ffffffff81d55771>] sk_filter+0x41/0x210
 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0
 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0
 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370
 [<ffffffff81f07af9>] can_receive+0xd9/0x120
 [<ffffffff81f07beb>] can_rcv+0xab/0x100
 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0
 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0
 [<ffffffff81d37f67>] process_backlog+0x127/0x280
 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0
 [<ffffffff810c88d4>] __do_softirq+0x184/0x440
 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30
 <EOI>
 [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40
 [<ffffffff810c8bed>] do_softirq+0x1d/0x20
 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110
 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520
 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230
 [<ffffffff810e3baf>] process_one_work+0x24f/0x670
 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0
 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480
 [<ffffffff810ebafc>] kthread+0x12c/0x150
 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70

Reported-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoLinux 4.4.49
Greg Kroah-Hartman [Tue, 14 Feb 2017 23:23:09 +0000 (15:23 -0800)]
Linux 4.4.49

7 years agodrm/i915: fix use-after-free in page_flip_completed()
Andrey Ryabinin [Thu, 26 Jan 2017 14:32:11 +0000 (17:32 +0300)]
drm/i915: fix use-after-free in page_flip_completed()

commit 5351fbb1bf1413f6024892093528280769ca852f upstream.

page_flip_completed() dereferences 'work' variable after executing
queue_work(). This is not safe as the 'work' item might be already freed
by queued work:

    BUG: KASAN: use-after-free in page_flip_completed+0x3ff/0x490 at addr ffff8803dc010f90
    Call Trace:
     __asan_report_load8_noabort+0x59/0x80
     page_flip_completed+0x3ff/0x490
     intel_finish_page_flip_mmio+0xe3/0x130
     intel_pipe_handle_vblank+0x2d/0x40
     gen8_irq_handler+0x4a7/0xed0
     __handle_irq_event_percpu+0xf6/0x860
     handle_irq_event_percpu+0x6b/0x160
     handle_irq_event+0xc7/0x1b0
     handle_edge_irq+0x1f4/0xa50
     handle_irq+0x41/0x70
     do_IRQ+0x9a/0x200
     common_interrupt+0x89/0x89

    Freed:
     kfree+0x113/0x4d0
     intel_unpin_work_fn+0x29a/0x3b0
     process_one_work+0x79e/0x1b70
     worker_thread+0x611/0x1460
     kthread+0x241/0x3a0
     ret_from_fork+0x27/0x40

Move queue_work() after trace_i915_flip_complete() to fix this.

Fixes: e5510fac98a7 ("drm/i915: add tracepoints for flip requests & completions")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126143211.24013-1-aryabinin@virtuozzo.com
(cherry picked from commit 05c41f926fcc7ef838c80a6a99d84f67b4e0b824)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
Takashi Iwai [Mon, 6 Feb 2017 14:09:48 +0000 (15:09 +0100)]
ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()

commit 37a7ea4a9b81f6a864c10a7cb0b96458df5310a3 upstream.

snd_seq_pool_done() syncs with closing of all opened threads, but it
aborts the wait loop with a timeout, and proceeds to the release
resource even if not all threads have been closed.  The timeout was 5
seconds, and if you run a crazy stuff, it can exceed easily, and may
result in the access of the invalid memory address -- this is what
syzkaller detected in a bug report.

As a fix, let the code graduate from naiveness, simply remove the loop
timeout.

BugLink: http://lkml.kernel.org/r/CACT4Y+YdhDV2H5LLzDTJDVF-qiYHUHhtRaW4rbb4gUhTCQB81w@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoALSA: seq: Fix race at creating a queue
Takashi Iwai [Wed, 8 Feb 2017 11:35:39 +0000 (12:35 +0100)]
ALSA: seq: Fix race at creating a queue

commit 4842e98f26dd80be3623c4714a244ba52ea096a8 upstream.

When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it.  Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.

The fix is to reference the queue object at the right time.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoxen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
Boris Ostrovsky [Mon, 30 Jan 2017 17:45:46 +0000 (12:45 -0500)]
xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()

commit 74470954857c264168d2b5a113904cf0cfd27d18 upstream.

rx_refill_timer should be deleted as soon as we disconnect from the
backend since otherwise it is possible for the timer to go off before
we get to xennet_destroy_queues(). If this happens we may dereference
queue->rx.sring which is set to NULL in xennet_disconnect_backend().

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoscsi: mpt3sas: disable ASPM for MPI2 controllers
ojab [Wed, 28 Dec 2016 11:05:24 +0000 (11:05 +0000)]
scsi: mpt3sas: disable ASPM for MPI2 controllers

commit ffdadd68af5a397b8a52289ab39d62e1acb39e63 upstream.

MPI2 controllers sometimes got lost (i.e. disappear from
/sys/bus/pci/devices) if ASMP is enabled.

Signed-off-by: Slava Kardakov <ojab@ojab.ru>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60644
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoscsi: aacraid: Fix INTx/MSI-x issue with older controllers
Dave Carroll [Thu, 9 Feb 2017 18:04:47 +0000 (11:04 -0700)]
scsi: aacraid: Fix INTx/MSI-x issue with older controllers

commit 8af8e1c22f9994bb1849c01d66c24fe23f9bc9a0 upstream.

commit 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang")

caused a problem on older controllers which do not support MSI-x (namely
ASR3405,ASR3805). This patch conditionalizes the previous patch to
controllers which support MSI-x

Fixes: 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang")
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agoscsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send
Steffen Maier [Wed, 8 Feb 2017 14:34:22 +0000 (15:34 +0100)]
scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send

commit 2dfa6688aafdc3f74efeb1cf05fb871465d67f79 upstream.

Dan Carpenter kindly reported:
<quote>
The patch d27a7cb91960: "zfcp: trace on request for open and close of
WKA port" from Aug 10, 2016, leads to the following static checker
warning:

drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port()
warn: 'req' was already freed.

drivers/s390/scsi/zfcp_fsf.c
  1609          zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
  1610          retval = zfcp_fsf_req_send(req);
  1611          if (retval)
  1612                  zfcp_fsf_req_free(req);
                                          ^^^
Freed.

  1613  out:
  1614          spin_unlock_irq(&qdio->req_q_lock);
  1615          if (req && !IS_ERR(req))
  1616                  zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id);
                                                                  ^^^^^^^^^^^
Use after free.

  1617          return retval;
  1618  }

Same thing for zfcp_fsf_close_wka_port() as well.
</quote>

Rather than relying on req being NULL (or ERR_PTR) for all cases where
we don't want to trace or should not trace,
simply check retval which is unconditionally initialized with -EIO != 0
and it can only become 0 on successful retval = zfcp_fsf_req_send(req).
With that we can also remove the then again unnecessary unconditional
initialization of req which was introduced with that earlier commit.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agonetvsc: Set maximum GSO size in the right place
Ben Hutchings [Thu, 9 Feb 2017 19:37:35 +0000 (19:37 +0000)]
netvsc: Set maximum GSO size in the right place

Commit a50af86dd49e "netvsc: reduce maximum GSO size" was wrongly
backported to 4.4-stable.  The maximum size needs to be set before the
net device is registered, in netvsc_probe().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 years agomac80211: Fix adding of mesh vendor IEs
Thorsten Horstmann [Fri, 3 Feb 2017 13:38:29 +0000 (14:38 +0100)]
mac80211: Fix adding of mesh vendor IEs

commit da7061c82e4a1bc6a5e134ef362c86261906c860 upstream.

The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead
it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The
return value in mesh_add_vendor_ies must therefore be checked against
ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with
WLAN_EID_VENDOR_SPECIFIC will be rejected.

Fixes: 082ebb0c258d ("mac80211: fix mesh beacon format")
Signed-off-by: Thorsten Horstmann <thorsten@defutech.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: Add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>