firefly-linux-kernel-4.4.55.git
16 years agoV4L/DVB (8469): cx23885: FusionHDTV7 Dual Express toggle reset.
Steven Toth [Tue, 1 Jul 2008 00:23:50 +0000 (21:23 -0300)]
V4L/DVB (8469): cx23885: FusionHDTV7 Dual Express toggle reset.

Ensure the tuners and demods are brought in and out of reset during
driver startup.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8468): cx23885: Ensure the second transport port is enabled for streaming.
Steven Toth [Mon, 30 Jun 2008 23:58:38 +0000 (20:58 -0300)]
V4L/DVB (8468): cx23885: Ensure the second transport port is enabled for streaming.

It was previously disabled pending a bugfix, which has since been
resolved.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8467): cx23885: Minor cleanup to the debuging output for a specific register.
Steven Toth [Mon, 30 Jun 2008 23:54:34 +0000 (20:54 -0300)]
V4L/DVB (8467): cx23885: Minor cleanup to the debuging output for a specific register.

Don't display the register when it's not appropriate for the specific port.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8466): cx23885: Bugfix - DVB Transport cards using DVB port VIDB/TS1 did...
Steven Toth [Sat, 28 Jun 2008 03:58:35 +0000 (00:58 -0300)]
V4L/DVB (8466): cx23885: Bugfix - DVB Transport cards using DVB port VIDB/TS1 did not stream.

Certain DVB cards that have demodulators on TS1/VIDB were not streaming packets.
This ensure the pin directions on PAD_CTRL are set correctly, solving the issue.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8465): cx23885: Ensure PAD_CTRL is always reset to a sensible default
Steven Toth [Sat, 28 Jun 2008 03:52:45 +0000 (00:52 -0300)]
V4L/DVB (8465): cx23885: Ensure PAD_CTRL is always reset to a sensible default

PAD_CTRL controls TS1 and TS2 input and output states, if the register
became corrupt the driver was never able to recover.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8464): cx23885: Bugfix for concurrent use of /dev/video0 and /dev/video1
Steven Toth [Sat, 28 Jun 2008 03:48:18 +0000 (00:48 -0300)]
V4L/DVB (8464): cx23885: Bugfix for concurrent use of /dev/video0 and /dev/video1

With the HVR1800, trying to use video0 and video1 simultaneously caused
buffer corruption in the PCIe bridge. This fix reallocates video1
buffer locations to avoid the issue.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8462): cx18: Lock the aux PLL to the video pixle rate for analog captures
Andy Walls [Fri, 25 Jul 2008 18:03:08 +0000 (15:03 -0300)]
V4L/DVB (8462): cx18: Lock the aux PLL to the video pixle rate for analog captures

cx18: Lock the aux PLL to the video pixel rate for analog captures.  The
datasheet for the CX25840 says this is important for MPEG encoding applications.
To ensure the PLL locking was correct, also fixed the aux PLL's multiplier to
be computed based on a precise crystal freq of 4.5 MHz/286 * 455/2 * 8 =
28636363.6363... instead of the imporperly rounded 28636363.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8461): cx18: Fix 32 kHz audio sample output rate for analog tuner SIF input
Andy Walls [Wed, 23 Jul 2008 23:28:23 +0000 (20:28 -0300)]
V4L/DVB (8461): cx18: Fix 32 kHz audio sample output rate for analog tuner SIF input

cx18: Fix 32 kHz audio sample output rate for analog tuner SIF input so it
works.  The AUX_PLL VCO was being operated at 196.6 MHz out of the spec'ed
200-600 MHz range.  Fixed the multipler and post dividers to operate the VCO
within specification and added comments on how magic numbers are derived.

Thanks to Hans Verkuil for pointing out this interesting problem to solve.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8458): gspca_sonixb remove one more no longer needed special case from the...
Hans de Goede [Wed, 23 Jul 2008 10:04:39 +0000 (07:04 -0300)]
V4L/DVB (8458): gspca_sonixb remove one more no longer needed special case from the code

gspca_sonixb remove one more no longer needed special case from the code

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8457): gspca_sonixb remove some no longer needed sn9c103+ov7630 special...
Andoni Zubimendi [Tue, 22 Jul 2008 11:39:24 +0000 (08:39 -0300)]
V4L/DVB (8457): gspca_sonixb remove some no longer needed sn9c103+ov7630 special cases

gspca_sonixb remove some no longer needed sn9c103+ov7630 special cases

Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8456): gspca_sonixb remove non working ovXXXX contrast, hue and saturation...
Hans de Goede [Tue, 22 Jul 2008 10:13:21 +0000 (07:13 -0300)]
V4L/DVB (8456): gspca_sonixb remove non working ovXXXX contrast, hue and saturation ctrls

gspca_sonixb remove non working ovXXXX contrast, hue and saturation ctrls

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8455): gspca_sonixb sn9c103 + ov7630 autoexposure and cleanup
Hans de Goede [Tue, 22 Jul 2008 10:09:33 +0000 (07:09 -0300)]
V4L/DVB (8455): gspca_sonixb sn9c103 + ov7630 autoexposure and cleanup

Andoni Zubimendi has been doing some testing with his sn9c103 cam with
ov7630 sensor, and with this patch the exposure setting and autoexposure now
work.

This patch also removes some special cases in the shared ov6650 / ov7630 code
which now are handled the same for both sensors and it adds a new special case
which stops us from changing the hsync / vsync polarity settings from their
default on the ov7630 (which we were doing as a side-effect of using the ov6650
exposure code for the ov7630).

Last this patch removes the superficial difference between the OV7630 and
OV7630_3 sensors.

Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8453): sms1xxx: dvb/siano/: cleanups
Adrian Bunk [Tue, 22 Jul 2008 02:17:36 +0000 (23:17 -0300)]
V4L/DVB (8453): sms1xxx: dvb/siano/: cleanups

This patch contains the following cleanups:
- mark smscore_module_init() as __init
- mark smscore_module_exit as __exit
- make the following needlessly global code static:
  - smscoreapi.c: struct g_smscore_notifyees
  - smscoreapi.c: struct g_smscore_devices
  - smscoreapi.c: struct g_smscore_deviceslock
  - smscoreapi.c: struct g_smscore_registry
  - smscoreapi.c: struct g_smscore_registrylock
  - smscoreapi.c: smscore_module_init()
  - smscoreapi.c: smscore_module_exit()
  - smsdvb.c: struct g_smsdvb_clients
  - smsdvb.c: struct g_smsdvb_clientslock

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8451): dw2102: fix in-kernel compilation
Mauro Carvalho Chehab [Thu, 24 Jul 2008 17:37:55 +0000 (14:37 -0300)]
V4L/DVB (8451): dw2102: fix in-kernel compilation

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoMerge ../linux-2.6
Mauro Carvalho Chehab [Thu, 24 Jul 2008 17:05:50 +0000 (14:05 -0300)]
Merge ../linux-2.6

16 years agoV4L/DVB (8234a): uvcvideo: Fix build for uvc input
Mauro Carvalho Chehab [Mon, 7 Jul 2008 23:04:29 +0000 (20:04 -0300)]
V4L/DVB (8234a): uvcvideo: Fix build for uvc input

Fix a bug introduced by some trouble on my -git tree that resulted on a hunk to
be lost (probably caused by some rebase).

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoMerge branch 'x86/auditsc' of git://git.kernel.org/pub/scm/linux/kernel/git/frob...
Linus Torvalds [Thu, 24 Jul 2008 03:39:21 +0000 (20:39 -0700)]
Merge branch 'x86/auditsc' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsc' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  i386 syscall audit fast-path
  x86_64 ia32 syscall audit fast-path
  x86_64 syscall audit fast-path
  x86_64: remove bogus optimization in sysret_signal

16 years agoMerge branch 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
Linus Torvalds [Thu, 24 Jul 2008 02:36:53 +0000 (19:36 -0700)]
Merge branch 'sched/for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: hrtick_enabled() should use cpu_active()
  sched, x86: clean up hrtick implementation
  sched: fix build error, provide partition_sched_domains() unconditionally
  sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if it's not needed
  cpu hotplug: Make cpu_active_map synchronization dependency clear
  cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)
  sched: rework of "prioritize non-migratable tasks over migratable ones"
  sched: reduce stack size in isolated_cpu_setup()
  Revert parts of "ftrace: do not trace scheduler functions"

Fixed up conflicts in include/asm-x86/thread_info.h (due to the
TIF_SINGLESTEP unification vs TIF_HRTICK_RESCHED removal) and
kernel/sched_fair.c (due to cpu_active_map vs for_each_cpu_mask_nr()
introduction).

16 years agoMerge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 24 Jul 2008 01:37:44 +0000 (18:37 -0700)]
Merge branch 'cpus4096-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually

16 years agoMerge branch 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 24 Jul 2008 01:34:13 +0000 (18:34 -0700)]
Merge branch 'core/softlockup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softlockup: fix invalid proc_handler for softlockup_panic
  softlockup: fix watchdog task wakeup frequency
  softlockup: fix watchdog task wakeup frequency
  softlockup: show irqtrace
  softlockup: print a module list on being stuck
  softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
  softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds
  softlockup: fix softlockup_thresh fix
  softlockup: fix softlockup_thresh unaligned access and disable detection at runtime
  softlockup: allow panic on lockup

16 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 24 Jul 2008 01:24:08 +0000 (18:24 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits)
  [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR)
  [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB)
  [ARM] pxa: add base support for PXA930 (aka Tavor-P)
  [ARM] Update mach-types
  [ARM] pxa: make littleton to use the new smc91x platform data
  [ARM] pxa: make zylonite to use the new smc91x platform data
  [ARM] pxa: make mainstone to use the new smc91x platform data
  [ARM] pxa: make lubbock to use new smc91x platform data
  [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data
  [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable
  [NET] smc91x: add SMC91X_NOWAIT flag to platform data
  [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*
  [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata"
  [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper
  Support for LCD on e740 e750 e400 and e800 e-series PDAs
  E-series UDC support
  PXA UDC - allow use of inverted GPIO for pullup
  Add e350 support
  Fix broken e-series build
  E-series GPIO / IRQ definitions.
  ...

16 years agoi386 syscall audit fast-path
Roland McGrath [Tue, 24 Jun 2008 11:16:52 +0000 (04:16 -0700)]
i386 syscall audit fast-path

This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>
16 years agox86_64 ia32 syscall audit fast-path
Roland McGrath [Tue, 24 Jun 2008 08:13:31 +0000 (01:13 -0700)]
x86_64 ia32 syscall audit fast-path

This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>
16 years agox86_64 syscall audit fast-path
Roland McGrath [Mon, 23 Jun 2008 22:37:04 +0000 (15:37 -0700)]
x86_64 syscall audit fast-path

This adds a fast path for 64-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
This path does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>
16 years agox86_64: remove bogus optimization in sysret_signal
Roland McGrath [Tue, 24 Jun 2008 03:41:12 +0000 (20:41 -0700)]
x86_64: remove bogus optimization in sysret_signal

This short-circuit path in sysret_signal looks wrong to me.
AFAICT, in practice the branch is never taken--and if it were,
it would go wrong.  To wit, try loading a module whose init
function does set_thread_flag(TIF_IRET), and see insmod crash
(presumably with a wrong user stack pointer).

This is because the FIXUP_TOP_OF_STACK work hasn't been done yet
when we jump around the call to ptregscall_common and get to
int_with_check--where it expects the user RSP,SS,CS and EFLAGS to
have been stored by FIXUP_TOP_OF_STACK.

I don't think it's normally possible to get to sysret_signal with no
_TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are
already superfluous.  If it ever did happen, it is harmless to call
do_notify_resume with nothing for it to do.

Signed-off-by: Roland McGrath <roland@redhat.com>
16 years agoV4L/DVB (8442): gspca: Remove the version from the subdrivers.
Jean-Francois Moine [Tue, 22 Jul 2008 08:35:10 +0000 (05:35 -0300)]
V4L/DVB (8442): gspca: Remove the version from the subdrivers.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8441): gspca: Bad handling of start of frames in sonixj.
Jean-Francois Moine [Tue, 22 Jul 2008 06:45:08 +0000 (03:45 -0300)]
V4L/DVB (8441): gspca: Bad handling of start of frames in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8440): gspca: Makes some needlessly global functions static.
Adrian Bunk [Tue, 22 Jul 2008 05:35:05 +0000 (02:35 -0300)]
V4L/DVB (8440): gspca: Makes some needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8438): gspca: Lack of matrix for zc3xx - tas5130c (vf0250).
Jean-Francois Moine [Mon, 21 Jul 2008 08:42:17 +0000 (05:42 -0300)]
V4L/DVB (8438): gspca: Lack of matrix for zc3xx - tas5130c (vf0250).

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8436): gspca: Version number only in the main driver.
Jean-Francois Moine [Sat, 19 Jul 2008 09:49:28 +0000 (06:49 -0300)]
V4L/DVB (8436): gspca: Version number only in the main driver.

The version numbers of the subrivers will be removed as these ones
will be changed for any other purpose.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8435): gspca: Delay after reset for ov7660 and USB traces in sonixj.
Jean-Francois Moine [Fri, 18 Jul 2008 11:46:19 +0000 (08:46 -0300)]
V4L/DVB (8435): gspca: Delay after reset for ov7660 and USB traces in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8434): Fix x86_64 compilation and move some macros to v4l2-ioctl.h
Mauro Carvalho Chehab [Sun, 20 Jul 2008 23:26:54 +0000 (20:26 -0300)]
V4L/DVB (8434): Fix x86_64 compilation and move some macros to v4l2-ioctl.h

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or...
Hans Verkuil [Sun, 20 Jul 2008 11:12:02 +0000 (08:12 -0300)]
V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h

The functions in a header should not belong to another module. The prio functions
belong to v4l2-common.c, so move them to v4l2-common.h.

The ioctl functions belong to v4l2-ioctl.c, so create a new v4l2-ioctl.h header
and move those functions to it.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8433): Fix macro name at z0194a.h
Mauro Carvalho Chehab [Sun, 20 Jul 2008 13:49:39 +0000 (10:49 -0300)]
V4L/DVB (8433): Fix macro name at z0194a.h

As reported by Hans Verkuil:

In file included from /home/v4l/master/v4l/dw2102.c:14:
/home/v4l/master/v4l/z0194a.h:93: error: 'STV0229_LOCKOUTPUT_1' undeclared here (not in a function)

This is due to some typos that were fixed on stv0299.

This patch renames it in accord with that fix.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8429): videodev: renamed 'class_dev' to 'dev'
Hans Verkuil [Sun, 20 Jul 2008 09:35:02 +0000 (06:35 -0300)]
V4L/DVB (8429): videodev: renamed 'class_dev' to 'dev'

The class_dev field is a normal device, not a class device. This is very
confusing and now that the old 'dev' field has been renamed to 'parent'
we can rename 'class_dev' to just 'dev'.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8428): videodev: rename 'dev' to 'parent'
Hans Verkuil [Sun, 20 Jul 2008 09:31:39 +0000 (06:31 -0300)]
V4L/DVB (8428): videodev: rename 'dev' to 'parent'

The field 'dev' is not the video device, but the parent of the video device.
Rename accordingly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (8427): videodev: split off the ioctl handling into v4l2-ioctl.c
Hans Verkuil [Sun, 20 Jul 2008 11:43:17 +0000 (08:43 -0300)]
V4L/DVB (8427): videodev: split off the ioctl handling into v4l2-ioctl.c

videodev.c became top-heavy so all the ioctl processing has been split off
into v4l2-ioctl.c. This means videodev.c is back to its original purpose:
creating and registering v4l devices.

Since videodev.c and v4l2-ioctl.c should still remain one module (as least
for now) I also had to rename videodev.c to v4l2-dev.c to prevent a
circular dependency when building a videodev.ko module. This is not a bad
thing, since the source and header now have the same name. And the v4l2-
prefix is useful to see which sources are generic v4l2 support code.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Wed, 23 Jul 2008 19:04:34 +0000 (12:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: highmem capable PIO routines
  sg: reimplement sg mapping iterator
  mmc_test: print message when attaching to card
  mmc: Remove Russell as primecell mci maintainer
  mmc_block: bounce buffer highmem support
  sdhci: fix bad warning from commit c8b3e02
  sdhci: add warnings for bad buffers in ADMA path
  mmc_test: test oversized sg lists
  mmc_test: highmem tests
  s3cmci: ensure host stopped on machine shutdown
  au1xmmc: suspend/resume implementation
  s3cmci: fixes for section mismatch warnings
  pxamci: trivial fix of DMA alignment register bit clearing

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Wed, 23 Jul 2008 19:03:18 +0000 (12:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/djbw/async_tx

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits)
  I/OAT: I/OAT version 3.0 support
  I/OAT: tcp_dma_copybreak default value dependent on I/OAT version
  I/OAT: Add watchdog/reset functionality to ioatdma
  iop_adma: cleanup iop_chan_xor_slot_count
  iop_adma: document how to calculate the minimum descriptor pool size
  iop_adma: directly reclaim descriptors on allocation failure
  async_tx: make async_tx_test_ack a boolean routine
  async_tx: remove depend_tx from async_tx_sync_epilog
  async_tx: export async_tx_quiesce
  async_tx: fix handling of the "out of descriptor" condition in async_xor
  async_tx: ensure the xor destination buffer remains dma-mapped
  async_tx: list_for_each_entry_rcu() cleanup
  dmaengine: Driver for the Synopsys DesignWare DMA controller
  dmaengine: Add slave DMA interface
  dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap
  dmaengine: Add dma_client parameter to device_alloc_chan_resources
  dmatest: Simple DMA memcpy test client
  dmaengine: DMA engine driver for Marvell XOR engine
  iop-adma: fix platform driver hotplug/coldplug
  dmaengine: track the number of clients using a channel
  ...

Fixed up conflict in drivers/dca/dca-sysfs.c manually

16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Wed, 23 Jul 2008 18:59:37 +0000 (11:59 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: kgdboc console poll hooks for mpsc uart
  kgdb: kgdboc console poll hooks for cpm uart
  kgdb, powerpc: arch specific powerpc kgdb support
  kgdb: support for ARCH=arm
  kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Wed, 23 Jul 2008 18:59:09 +0000 (11:59 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (60 commits)
  ide: small whitespace fixes
  ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings
  ide: ide-cd.c fix sparse endianness warnings
  ide-cd: convert to using the new atapi_flags
  ide: remove unused PC_FLAG_DRQ_INTERRUPT
  ide-scsi: convert to using the new atapi_flags
  ide-tape: convert to using the new atapi_flags
  ide-floppy: convert to using the new atapi_flags (take 2)
  ide: add per-device flags
  ide: use rq->cmd instead of pc->c in atapi common code
  ide-scsi: pass packet command in rq->cmd
  ide-tape: pass packet command in rq->cmd
  ide-tape: make room for packet command ids in rq->cmd
  ide-floppy: pass packet command in rq->cmd
  ide: remove pc->callback member from ide_atapi_pc
  ide-scsi: use drive->pc_callback instead of pc->callback
  ide-tape: use drive->pc_callback instead of pc->callback
  ide-floppy: use drive->pc_callback instead of pc->callback
  ide: push pc callback pointer into the ide_drive_t structure
  drivers/ide/ide-tape.c: remove double kfree
  ...

16 years agoide: small whitespace fixes
Pavel Machek [Wed, 23 Jul 2008 17:56:02 +0000 (19:56 +0200)]
ide: small whitespace fixes

Small whitespace fixes for drivers/ide.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings
Harvey Harrison [Wed, 23 Jul 2008 17:56:02 +0000 (19:56 +0200)]
ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings

The function ide_cd_queue_pc should be checked as the bufflen arg is
dereferenced and lots of callers are passing in NULL.

drivers/ide/ide-cd_ioctl.c:124:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:149:47: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:231:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:374:46: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: ide-cd.c fix sparse endianness warnings
Harvey Harrison [Wed, 23 Jul 2008 17:56:02 +0000 (19:56 +0200)]
ide: ide-cd.c fix sparse endianness warnings

drivers/ide/ide-cd.c:1276:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd.c:1298:19: warning: cast to restricted __be32
drivers/ide/ide-cd.c:1300:4: warning: cast to restricted __be32
drivers/ide/ide-cd.c:1522:14: warning: cast to restricted __le16
drivers/ide/ide-cd.c:1523:14: warning: cast to restricted __le16
drivers/ide/ide-cd.c:1525:14: warning: cast to restricted __be16
drivers/ide/ide-cd.c:1526:14: warning: cast to restricted __be16
drivers/ide/ide-cd.c:1667:37: warning: cast to restricted __be16

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: convert to using the new atapi_flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:02 +0000 (19:56 +0200)]
ide-cd: convert to using the new atapi_flags

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove unused PC_FLAG_DRQ_INTERRUPT
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000 (19:56 +0200)]
ide: remove unused PC_FLAG_DRQ_INTERRUPT

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-scsi: convert to using the new atapi_flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000 (19:56 +0200)]
ide-scsi: convert to using the new atapi_flags

Remove unused IDESCSI_PC_RQ while at it.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-tape: convert to using the new atapi_flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000 (19:56 +0200)]
ide-tape: convert to using the new atapi_flags

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-floppy: convert to using the new atapi_flags (take 2)
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000 (19:56 +0200)]
ide-floppy: convert to using the new atapi_flags (take 2)

while at it, remove PC_FLAG_ZIP_DRIVE from the packed command flags altogether
and query the drive type through drive->atapi_flags.

v2:
ide-floppy fix.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add per-device flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000 (19:56 +0200)]
ide: add per-device flags

Push device flags up into ide_drive_t.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use rq->cmd instead of pc->c in atapi common code
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000 (19:56 +0200)]
ide: use rq->cmd instead of pc->c in atapi common code

There should be no functionality change resulting from this patch.

[bart: s/HWGROUP(drive)/hwif->hwgroup/]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-scsi: pass packet command in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000 (19:56 +0200)]
ide-scsi: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd.
Later, after all drivers have been converted, it'll be
switched to use that in the common code instead of pc->c.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-tape: pass packet command in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000 (19:56 +0200)]
ide-tape: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd. Later, after
all drivers have been converted, it'll be switched to use that in the
common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-tape: make room for packet command ids in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000 (19:56 +0200)]
ide-tape: make room for packet command ids in rq->cmd

ide-tape uses rq->cmd for special commands from the chrdev interface so move
those to byte 13 (BLK_MAX_CDB = 16) since a packet cmd is max 12 bytes.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-floppy: pass packet command in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000 (19:56 +0200)]
ide-floppy: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd.
Later, after all drivers have been converted, it'll be
switched to use that in the common code instead of pc->c.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove pc->callback member from ide_atapi_pc
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000 (19:56 +0200)]
ide: remove pc->callback member from ide_atapi_pc

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-scsi: use drive->pc_callback instead of pc->callback
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000 (19:55 +0200)]
ide-scsi: use drive->pc_callback instead of pc->callback

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-tape: use drive->pc_callback instead of pc->callback
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000 (19:55 +0200)]
ide-tape: use drive->pc_callback instead of pc->callback

The if-else block in the IRQ handler is only temporary so that bisect searches
don't break and it'll be removed after converting the remainder of the drivers.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-floppy: use drive->pc_callback instead of pc->callback
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000 (19:55 +0200)]
ide-floppy: use drive->pc_callback instead of pc->callback

It is important that drive->pc_callback is set prior to enabling IRQs on the
device since this is called from the IRQ handler. Otherwise it hurts as I learnt
the hard way from the several "Kernel panic - not synching: Fatal exception in
interrupt" during the weekend :).

The if-else block in the IRQ handler is only temporary so that bisect searches
don't break and it'll be removed after converting the remainder of the drivers.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: push pc callback pointer into the ide_drive_t structure
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000 (19:55 +0200)]
ide: push pc callback pointer into the ide_drive_t structure

Refrain from carrying the callback ptr with every packet command since the
callback function is only one anyways. ide_drive_t is probably not the most
suitable place for it right now but is the more sane solution. Besides, these
structs are going to be reorganized anyways during the generic ide rewrite.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agodrivers/ide/ide-tape.c: remove double kfree
Darren Jenkins [Wed, 23 Jul 2008 17:55:59 +0000 (19:55 +0200)]
drivers/ide/ide-tape.c: remove double kfree

Coverity CID: 2336 USE_AFTER_FREE

drivers/ide/ide-tape.c ide_tape_kfree_buffer() double free's a pointer
(hint freed by an alias in first outer loop).

This patch simply removes the superfluous kfree().

Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: gadio@netvision.net.il
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ide_host_free() helper (take 2)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:59 +0000 (19:55 +0200)]
ide: add ide_host_free() helper (take 2)

* Add ide_host_free() helper and convert ide_host_remove() to use it.

* Fix handling of ide_host_register() failure in ide_host_add(),
  icside.c, ide-generic.c, falconide.c and sgiioc4.c.

While at it:

* Fix handling of ide_host_alloc_all() failure in ide-generic.c.

* Fix handling of ide_host_alloc() failure in falconide.c
  (also return the correct error value if no device is found).

v2:
* falconide build fix. (From Stephen Rothwell)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: allocate ide_hwif_t instances dynamically
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:58 +0000 (19:55 +0200)]
ide: allocate ide_hwif_t instances dynamically

* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[].

  This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10):

   text    data     bss     dec     hex filename
   9140      40   14084   23264    5ae0 drivers/ide/ide-probe.o.before
   9169      40      44    9253    2425 drivers/ide/ide-probe.o.after

* Remove no longer needed ide_init_port_data() call from ide_unregister().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ide_ports[]
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:58 +0000 (19:55 +0200)]
ide: add ide_ports[]

* Add ide_ports[] table keeping pointers to all initialized ports.

* Set ide_ports[] entry for a given port in init_irq() and clear it
  ide_remove_port_from_hwgroup().

* Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for
  grouping ports into hwgroup.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: move ide_remove_port_from_hwgroup() to ide-probe.c
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:58 +0000 (19:55 +0200)]
ide: move ide_remove_port_from_hwgroup() to ide-probe.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: fix IDE port slots reservation and freeing (take 2)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000 (19:55 +0200)]
ide: fix IDE port slots reservation and freeing (take 2)

* Make ide_find_port_slot() return port slot index.

* Add ide_free_port_slot() helper.

* Move ide_init_port_data() call and error printk() from
  ide_find_port_slot() to ide_host_alloc_all().

* Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex
  and convert them use ide_indexes bitmap to keep track of
  reserved port slots.

* Don't set hwif->chipset in ide_host_alloc_all() as it is
  no longer necessary.

v2:
* Pass the correct slot index to ide_init_port_data().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: fix ide_host_register() return value
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000 (19:55 +0200)]
ide: fix ide_host_register() return value

Fix ide_host_register() to fail only if all ports cannot be registered.

While at it:

* Use host->ports[] instead of ide_hwifs[] and remove idx[].

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ide_host_add() helper
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000 (19:55 +0200)]
ide: add ide_host_add() helper

Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(),
then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some
host drivers to use it.

While at it:

* Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c,
  macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value.

* -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c
  and pmac.c

* -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c

* -1 -> -ENOMEM in ide-pnp.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add struct ide_host (take 3)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000 (19:55 +0200)]
ide: add struct ide_host (take 3)

* Add struct ide_host which keeps pointers to host's ports.

* Add ide_host_alloc[_all]() and ide_host_remove() helpers.

* Pass 'struct ide_host *host' instead of 'u8 *idx' to
  ide_device_add[_all]() and rename it to ide_host_register[_all]().

* Convert host drivers and core code to use struct ide_host.

* Remove no longer needed ide_find_port().

* Make ide_find_port_slot() static.

* Unexport ide_unregister().

v2:
* Add missing 'struct ide_host *host' to macide.c.

v3:
* Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/)
  (Noticed by Stephen Rothwell).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add struct ide_tp_ops (take 2)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:56 +0000 (19:55 +0200)]
ide: add struct ide_tp_ops (take 2)

* Add struct ide_tp_ops for transport methods.

* Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info
  and ide_hwif_t.

* Set the default hwif->tp_ops in ide_init_port_data().

* Set host driver specific hwif->tp_ops in ide_init_port().

* Export ide_exec_command(), ide_read_status(), ide_read_altstatus(),
  ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}()
  and ata_{in,out}put_data().

* Convert host drivers and core code to use struct ide_tp_ops.

* Remove no longer needed default_hwif_transport().

* Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops.

While at it:

* Use struct ide_port_info in falconide.c and q40ide.c.

* Rename ata_{in,out}put_data() to ide_{in,out}put_data().

v2:

* Fix missing convertion in ns87415.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add 'config' field to hw_regs_t
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:56 +0000 (19:55 +0200)]
ide: add 'config' field to hw_regs_t

Add 'config' field to hw_regs_t and use it to set hwif->config_data in
ide_init_port_hw(), then convert ide_legacy_init_one() to use hw->config.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-generic: probing fix
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:56 +0000 (19:55 +0200)]
ide-generic: probing fix

* Don't skip probing IDE port if the corresponding ide_hwifs[] slot
  is already occupied.

* Remove duplicate idx[i] assignment.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agogayle: reserve memory resources at once
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:56 +0000 (19:55 +0200)]
gayle: reserve memory resources at once

* Reserve memory resources for all IDE ports at once by moving
  request_mem_region() out of 'for ()' loop and always defining
  GAYLE_IDEREG_SIZE to 0x2000.

* Keep memory resources even if no free IDE slots can be found
  (this driver is unloadable currently).

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: filter out "default" transfer mode values in set_xfer_rate()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:56 +0000 (19:55 +0200)]
ide: filter out "default" transfer mode values in set_xfer_rate()

* Filter out "default" transfer mode values (0x00 - default PIO mode,
  0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted
  /proc/ide/hd?/settings:current_speed setting.

  Allowing "default" transfer mode values is a dangerous thing to do as
  we don't support programming controller to the "default" transfer mode
  and devices often use different values for the default and maximum PIO
  mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay
  programmed for higher PIO mode while device will use the lower PIO mode.

  There is no functionality loss as by using special IOCTLs device can
  still be programmed to "default" transfer modes (it is only useful for
  debugging/testing purposes anyway).

* Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was
  previously used by few host drivers to program the controller to PIO0
  timings for "default" transfer mode == 0x01 (although some host drivers
  would program invalid PIO timings instead).

* Cleanup ide_set_xfer_rate() and add BUG_ON().

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: filter out invalid transfer mode values in set_xfer_rate()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:55 +0000 (19:55 +0200)]
ide: filter out invalid transfer mode values in set_xfer_rate()

Filter out invalid transfer mode values (0x02-0x07) in write handler
for obsoleted /proc/ide/hd?/settings:current_speed setting.

While at it:

* Use XFER_UDMA_6 define.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove dead Virtual DMA support
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:55 +0000 (19:55 +0200)]
ide: remove dead Virtual DMA support

Lets remove dead Virtual DMA support for now so it doesn't clutter
core IDE code (it can be bring back when there is a need for it):

* Remove IDE_HFLAG_VDMA host flag.

* Remove ide_drive_t.vdma flag.

* cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops
  (also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA).

There should be no functional changes caused by this patch.

Cc: TAKADA Yoshihito <takada@mbf.nifty.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: mark hpt34x host driver as BROKEN
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:55 +0000 (19:55 +0200)]
ide: mark hpt34x host driver as BROKEN

Alan Cox has noticed some time ago that hpt34x is broken
(http://lkml.org/lkml/2007/7/3/257):

"No the old driver doesn't even do that. It starts up. It spuriously
adjusts some non writable PCI BAR registers, prints a message about
resources being in use already then exits."

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: limit cy82c693 host driver to ALPHA
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:54 +0000 (19:55 +0200)]
ide: limit cy82c693 host driver to ALPHA

Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove ->INB, ->OUTB and ->OUTBSYNC methods
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:54 +0000 (19:55 +0200)]
ide: remove ->INB, ->OUTB and ->OUTBSYNC methods

* Remove no longer needed ->INB, ->OUTB and ->OUTBSYNC methods.

Then:

* Remove no longer used default_hwif_[mm]iops() and ide_[mm_]outbsync().

* Cleanup SuperIO handling in ns87415.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ide_read_bcount_and_ireason() helper
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:54 +0000 (19:55 +0200)]
ide: add ide_read_bcount_and_ireason() helper

Add ide_read_bcount_and_ireason() helper and use it instead of ->INB
in {cdrom_newpc,ide_pc}_intr().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ide_read_ireason() helper
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:54 +0000 (19:55 +0200)]
ide: add ide_read_ireason() helper

Add ide_read_ireason() helper and use instead of ->INB for reading
ATAPI Interrupt Reason register.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ide_read_device() helper
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:54 +0000 (19:55 +0200)]
ide: add ide_read_device() helper

Add ide_read_device() helper and convert do_probe() to use it
instead of ->INB.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use ->tf_read in ide_read_error()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:53 +0000 (19:55 +0200)]
ide: use ->tf_read in ide_read_error()

* Add IDE_TFLAG_IN_FEATURE taskfile flag for reading Feature
  register and handle it in ->tf_read.

* Convert ide_read_error() to use ->tf_read instead of ->INB,
  then uninline and export it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use ->tf_load in SELECT_DRIVE()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:53 +0000 (19:55 +0200)]
ide: use ->tf_load in SELECT_DRIVE()

Convert SELECT_DRIVE() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use ->tf_load in actual_try_to_identify()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:53 +0000 (19:55 +0200)]
ide: use ->tf_load in actual_try_to_identify()

Convert actual_try_to_identify() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use ->tf_load in ide_config_drive_speed()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:52 +0000 (19:55 +0200)]
ide: use ->tf_load in ide_config_drive_speed()

Convert ide_config_drive_speed() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: change order of register access in ide_config_drive_speed()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:52 +0000 (19:55 +0200)]
ide: change order of register access in ide_config_drive_speed()

Write ATA Feature register before ATA Sector Count register as
a preparation to use ->tf_load in ide_config_drive_speed().

This change shouldn't affect anything (just an usual paranoia).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ->set_irq method
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:52 +0000 (19:55 +0200)]
ide: add ->set_irq method

Add ->set_irq method for setting nIEN bit of ATA Device Control
register and use it instead of ide_set_irq().

While at it:

* Use ->set_irq in init_irq() and do_reset1().

* Don't use HWIF() macro in ide_check_pm_state().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ->read_altstatus method
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:52 +0000 (19:55 +0200)]
ide: add ->read_altstatus method

* Remove ide_read_altstatus() inline helper.

* Add ->read_altstatus method for reading ATA Alternate Status
  register and use it instead of ->INB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ->read_status method
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:52 +0000 (19:55 +0200)]
ide: add ->read_status method

* Remove ide_read_status() inline helper.

* Add ->read_status method for reading ATA Status register
  and use it instead of ->INB.

While at it:

* Don't use HWGROUP() macro.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ->exec_command method
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:51 +0000 (19:55 +0200)]
ide: add ->exec_command method

Add ->exec_command method for writing ATA Command register
and use it instead of ->OUTBSYNC.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: factor out simplex handling from ide_pci_dma_base()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:51 +0000 (19:55 +0200)]
ide: factor out simplex handling from ide_pci_dma_base()

* Factor out simplex handling from ide_pci_dma_base() to
  ide_pci_check_simplex().

* Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma()
  and reset it in ide_init_port() if DMA initialization fails.

* Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove ide_setup_dma()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:51 +0000 (19:55 +0200)]
ide: remove ide_setup_dma()

Export sff_dma_ops and then remove ide_setup_dma().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove ->dma_{status,command} fields from ide_hwif_t
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:51 +0000 (19:55 +0200)]
ide: remove ->dma_{status,command} fields from ide_hwif_t

* Use ->dma_base + offset instead of ->dma_{status,command}
  and remove no longer needed ->dma_{status,command}.

While at it:

* Use ATA_DMA_* defines.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use I/O ops directly in ide-dma.c
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:50 +0000 (19:55 +0200)]
ide: use I/O ops directly in ide-dma.c

Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(),
ide_dma_start() and __ide_dma_end().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: add ->read_sff_dma_status method
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:50 +0000 (19:55 +0200)]
ide: add ->read_sff_dma_status method

Add ->read_sff_dma_status method for reading DMA Status register
and use it instead of ->INB.

While at it:

* Use inb() directly in ns87415.c::ns87415_dma_end().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:50 +0000 (19:55 +0200)]
ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)

* Add 'hw_regs_t **hws' argument to ide_device_add[_all]() and convert
  host drivers + ide_legacy_init_one() + ide_setup_pci_device[s]() to use
  it instead of calling ide_init_port_hw() directly.

  [ However if host has > 1 port we must still set hwif->chipset to hint
    consecutive ide_find_port() call that the previous slot is occupied. ]

* Unexport ide_init_port_hw().

v2:
* Use defines instead of hard-coded values in buddha.c, gayle.c and q40ide.c.
  (Suggested by Geert Uytterhoeven)

* Better patch description.

v3:
* Fix build problem in ide-cs.c. (Noticed by Stephen Rothwell)

There should be no functional changes caused by this patch.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: move ide_pci_setup_ports() call out from do_ide_setup_pci_device()
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:49 +0000 (19:55 +0200)]
ide: move ide_pci_setup_ports() call out from do_ide_setup_pci_device()

* Move ide_pci_setup_ports() call out from do_ide_setup_pci_device()
  to ide_setup_pci_device[s]().

* Drop no longer needed idx argument from do_ide_setup_pci_device().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take 2)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:49 +0000 (19:55 +0200)]
ide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take 2)

Move ide_find_port() call to pmac_ide_setup_device().

While at it:

- fix return value (s/-ENODEV/-ENOENT/)

- add DRV_NAME define and use it to set name field of pmac_port_info

- use ide_find_port_slot() instead of ide_find_port()

- remove superfluous error message (ide_find_port_slot() takes care of it)

- drop IDE interface number from driver banner message (but include bus type)

v2:
* Build fix (thanks to Stephen Rothwell for noticing the issue).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-pmac: add ->init_dev method (take 4)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:49 +0000 (19:55 +0200)]
ide-pmac: add ->init_dev method (take 4)

v2/3:
* Build fixes from Stephen Rothwell.

v4:
* Fix ->noprobe setting. (From Benjamin Herrenschmidt)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>