From: Greg Kroah-Hartman Date: Fri, 4 Sep 2015 16:13:39 +0000 (-0700) Subject: Revert "uart: pl011: Introduce register accessor" X-Git-Tag: firefly_0821_release~176^2~1092^2~1 X-Git-Url: http://plrg.eecs.uci.edu/git/?a=commitdiff_plain;h=f11c98417c65ddd730c483c1c9290ae0f7b121a7;p=firefly-linux-kernel-4.4.55.git Revert "uart: pl011: Introduce register accessor" This reverts commit 7b753f318d1456c8e7740f3bd96d1dbb362d5449 as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier Cc: Jun Nie Acked-by: Will Deacon Tested-by: Will Deacon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 29a291d3bf24..ee57e2bee9a1 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -85,26 +85,23 @@ struct vendor_data { unsigned int (*get_fifosize)(struct amba_device *dev); }; -/* Max address offset of register in use is 0x48 */ -#define REG_NR (0x48 >> 2) -#define IDX(x) (x >> 2) enum reg_idx { - REG_DR = IDX(UART01x_DR), - REG_RSR = IDX(UART01x_RSR), - REG_ST_DMAWM = IDX(ST_UART011_DMAWM), - REG_FR = IDX(UART01x_FR), - REG_ST_LCRH_RX = IDX(ST_UART011_LCRH_RX), - REG_ILPR = IDX(UART01x_ILPR), - REG_IBRD = IDX(UART011_IBRD), - REG_FBRD = IDX(UART011_FBRD), - REG_LCRH = IDX(UART011_LCRH), - REG_CR = IDX(UART011_CR), - REG_IFLS = IDX(UART011_IFLS), - REG_IMSC = IDX(UART011_IMSC), - REG_RIS = IDX(UART011_RIS), - REG_MIS = IDX(UART011_MIS), - REG_ICR = IDX(UART011_ICR), - REG_DMACR = IDX(UART011_DMACR), + REG_DR = UART01x_DR, + REG_RSR = UART01x_RSR, + REG_ST_DMAWM = ST_UART011_DMAWM, + REG_FR = UART01x_FR, + REG_ST_LCRH_RX = ST_UART011_LCRH_RX, + REG_ILPR = UART01x_ILPR, + REG_IBRD = UART011_IBRD, + REG_FBRD = UART011_FBRD, + REG_LCRH = UART011_LCRH, + REG_CR = UART011_CR, + REG_IFLS = UART011_IFLS, + REG_IMSC = UART011_IMSC, + REG_RIS = UART011_RIS, + REG_MIS = UART011_MIS, + REG_ICR = UART011_ICR, + REG_DMACR = UART011_DMACR, }; static unsigned int get_fifosize_arm(struct amba_device *dev) @@ -206,24 +203,6 @@ struct uart_amba_port { #endif }; -static unsigned int pl011_readw(struct uart_amba_port *uap, int index) -{ - WARN_ON(index > REG_NR); - return readw_relaxed(uap->port.membase + (index << 2)); -} - -static void pl011_writew(struct uart_amba_port *uap, int val, int index) -{ - WARN_ON(index > REG_NR); - writew_relaxed(val, uap->port.membase + (index << 2)); -} - -static void pl011_writeb(struct uart_amba_port *uap, u8 val, int index) -{ - WARN_ON(index > REG_NR); - writeb_relaxed(val, uap->port.membase + (index << 2)); -} - /* * Reads up to 256 characters from the FIFO or until it's empty and * inserts them into the TTY layer. Returns the number of characters @@ -236,12 +215,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) int fifotaken = 0; while (max_count--) { - status = pl011_readw(uap, REG_FR); + status = readw(uap->port.membase + REG_FR); if (status & UART01x_FR_RXFE) break; /* Take chars from the FIFO and update status */ - ch = pl011_readw(uap, REG_DR) | + ch = readw(uap->port.membase + REG_DR) | UART_DUMMY_DR_RX; flag = TTY_NORMAL; uap->port.icount.rx++; @@ -478,7 +457,7 @@ static void pl011_dma_tx_callback(void *data) dmacr = uap->dmacr; uap->dmacr = dmacr & ~UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); /* * If TX DMA was disabled, it means that we've stopped the DMA for @@ -592,7 +571,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) dma_dev->device_issue_pending(chan); uap->dmacr |= UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); uap->dmatx.queued = true; /* @@ -628,9 +607,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (uap->dmatx.queued) { uap->dmacr |= UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); uap->im &= ~UART011_TXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); return true; } @@ -640,7 +619,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); return true; } return false; @@ -654,7 +633,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) { if (uap->dmatx.queued) { uap->dmacr &= ~UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); } } @@ -680,12 +659,14 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) if (!uap->dmatx.queued) { if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + + REG_IMSC); } else ret = false; } else if (!(uap->dmacr & UART011_TXDMAE)) { uap->dmacr |= UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, + uap->port.membase + REG_DMACR); } return ret; } @@ -696,9 +677,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) */ dmacr = uap->dmacr; uap->dmacr &= ~UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); - if (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) { + if (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) { /* * No space in the FIFO, so enable the transmit interrupt * so we know when there is space. Note that once we've @@ -707,13 +688,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) return false; } - pl011_writew(uap, uap->port.x_char, REG_DR); + writew(uap->port.x_char, uap->port.membase + REG_DR); uap->port.icount.tx++; uap->port.x_char = 0; /* Success - restore the DMA state */ uap->dmacr = dmacr; - pl011_writew(uap, dmacr, REG_DMACR); + writew(dmacr, uap->port.membase + REG_DMACR); return true; } @@ -741,7 +722,7 @@ __acquires(&uap->port.lock) DMA_TO_DEVICE); uap->dmatx.queued = false; uap->dmacr &= ~UART011_TXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); } } @@ -781,11 +762,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) dma_async_issue_pending(rxchan); uap->dmacr |= UART011_RXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); uap->dmarx.running = true; uap->im &= ~UART011_RXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); return 0; } @@ -843,9 +824,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, */ if (dma_count == pending && readfifo) { /* Clear any error flags */ - pl011_writew(uap, - UART011_OEIS | UART011_BEIS | UART011_PEIS - | UART011_FEIS, REG_ICR); + writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, + uap->port.membase + REG_ICR); /* * If we read all the DMA'd characters, and we had an @@ -893,7 +873,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) /* Disable RX DMA - incoming data will wait in the FIFO */ uap->dmacr &= ~UART011_RXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); uap->dmarx.running = false; pending = sgbuf->sg.length - state.residue; @@ -913,7 +893,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); } } @@ -961,7 +941,7 @@ static void pl011_dma_rx_callback(void *data) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); } } @@ -974,7 +954,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) { /* FIXME. Just disable the DMA enable */ uap->dmacr &= ~UART011_RXDMAE; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); } /* @@ -1018,7 +998,7 @@ static void pl011_dma_rx_poll(unsigned long args) spin_lock_irqsave(&uap->port.lock, flags); pl011_dma_rx_stop(uap); uap->im |= UART011_RXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); spin_unlock_irqrestore(&uap->port.lock, flags); uap->dmarx.running = false; @@ -1080,7 +1060,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) skip_rx: /* Turn on DMA error (RX/TX will be enabled on demand) */ uap->dmacr |= UART011_DMAONERR; - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); /* * ST Micro variants has some specific dma burst threshold @@ -1088,9 +1068,9 @@ skip_rx: * be issued above/below 16 bytes. */ if (uap->vendor->dma_threshold) - pl011_writew(uap, - ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, - REG_ST_DMAWM); + writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap->port.membase + REG_ST_DMAWM); + if (uap->using_rx_dma) { if (pl011_dma_rx_trigger_dma(uap)) @@ -1115,12 +1095,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) return; /* Disable RX and TX DMA */ - while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY) + while (readw(uap->port.membase + REG_FR) & UART01x_FR_BUSY) barrier(); spin_lock_irq(&uap->port.lock); uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); - pl011_writew(uap, uap->dmacr, REG_DMACR); + writew(uap->dmacr, uap->port.membase + REG_DMACR); spin_unlock_irq(&uap->port.lock); if (uap->using_tx_dma) { @@ -1221,7 +1201,7 @@ static void pl011_stop_tx(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im &= ~UART011_TXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); pl011_dma_tx_stop(uap); } @@ -1231,7 +1211,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); static void pl011_start_tx_pio(struct uart_amba_port *uap) { uap->im |= UART011_TXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); pl011_tx_chars(uap, false); } @@ -1251,7 +1231,7 @@ static void pl011_stop_rx(struct uart_port *port) uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| UART011_PEIM|UART011_BEIM|UART011_OEIM); - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); pl011_dma_rx_stop(uap); } @@ -1262,7 +1242,7 @@ static void pl011_enable_ms(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); } static void pl011_rx_chars(struct uart_amba_port *uap) @@ -1282,7 +1262,7 @@ __acquires(&uap->port.lock) dev_dbg(uap->port.dev, "could not trigger RX DMA job " "fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); } else { #ifdef CONFIG_DMA_ENGINE /* Start Rx DMA poll */ @@ -1303,10 +1283,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, bool from_irq) { if (unlikely(!from_irq) && - pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) + readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) return false; /* unable to transmit character */ - pl011_writew(uap, c, REG_DR); + writew(c, uap->port.membase + REG_DR); uap->port.icount.tx++; return true; @@ -1353,7 +1333,7 @@ static void pl011_modem_status(struct uart_amba_port *uap) { unsigned int status, delta; - status = pl011_readw(uap, REG_FR) & UART01x_FR_MODEM_ANY; + status = readw(uap->port.membase + REG_FR) & UART01x_FR_MODEM_ANY; delta = status ^ uap->old_status; uap->old_status = status; @@ -1381,15 +1361,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap) return; /* workaround to make sure that all bits are unlocked.. */ - pl011_writew(uap, 0x00, REG_ICR); + writew(0x00, uap->port.membase + REG_ICR); /* * WA: introduce 26ns(1 uart clk) delay before W1C; * single apb access will incur 2 pclk(133.12Mhz) delay, * so add 2 dummy reads */ - dummy_read = pl011_readw(uap, REG_ICR); - dummy_read = pl011_readw(uap, REG_ICR); + dummy_read = readw(uap->port.membase + REG_ICR); + dummy_read = readw(uap->port.membase + REG_ICR); } static irqreturn_t pl011_int(int irq, void *dev_id) @@ -1401,13 +1381,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id) int handled = 0; spin_lock_irqsave(&uap->port.lock, flags); - imsc = pl011_readw(uap, REG_IMSC); - status = pl011_readw(uap, REG_RIS) & imsc; + imsc = readw(uap->port.membase + REG_IMSC); + status = readw(uap->port.membase + REG_RIS) & imsc; if (status) { do { check_apply_cts_event_workaround(uap); - pl011_writew(uap, status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), REG_ICR); + + writew(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap->port.membase + REG_ICR); if (status & (UART011_RTIS|UART011_RXIS)) { if (pl011_dma_rx_running(uap)) @@ -1424,7 +1406,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (pass_counter-- == 0) break; - status = pl011_readw(uap, REG_RIS) & imsc; + status = readw(uap->port.membase + REG_RIS) & imsc; } while (status != 0); handled = 1; } @@ -1438,7 +1420,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned int status = pl011_readw(uap, REG_FR); + unsigned int status = readw(uap->port.membase + REG_FR); return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } @@ -1447,7 +1429,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); unsigned int result = 0; - unsigned int status = pl011_readw(uap, REG_FR); + unsigned int status = readw(uap->port.membase + REG_FR); #define TIOCMBIT(uartbit, tiocmbit) \ if (status & uartbit) \ @@ -1467,7 +1449,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) container_of(port, struct uart_amba_port, port); unsigned int cr; - cr = pl011_readw(uap, REG_CR); + cr = readw(uap->port.membase + REG_CR); #define TIOCMBIT(tiocmbit, uartbit) \ if (mctrl & tiocmbit) \ @@ -1487,7 +1469,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) } #undef TIOCMBIT - pl011_writew(uap, cr, REG_CR); + writew(cr, uap->port.membase + REG_CR); } static void pl011_break_ctl(struct uart_port *port, int break_state) @@ -1498,12 +1480,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = pl011_readw(uap, uap->lcrh_tx); + lcr_h = readw(uap->port.membase + uap->lcrh_tx); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - pl011_writew(uap, lcr_h, uap->lcrh_tx); + writew(lcr_h, uap->port.membase + uap->lcrh_tx); spin_unlock_irqrestore(&uap->port.lock, flags); } @@ -1513,8 +1495,9 @@ static void pl011_quiesce_irqs(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); + unsigned char __iomem *regs = uap->port.membase; - pl011_writew(uap, pl011_readw(uap, REG_MIS), REG_ICR); + writew(readw(regs + REG_MIS), regs + REG_ICR); /* * There is no way to clear TXIM as this is "ready to transmit IRQ", so * we simply mask it. start_tx() will unmask it. @@ -1528,7 +1511,7 @@ static void pl011_quiesce_irqs(struct uart_port *port) * (including tx queue), so we're also fine with start_tx()'s caller * side. */ - pl011_writew(uap, pl011_readw(uap, REG_IMSC) & ~UART011_TXIM, REG_IMSC); + writew(readw(regs + REG_IMSC) & ~UART011_TXIM, regs + REG_IMSC); } static int pl011_get_poll_char(struct uart_port *port) @@ -1543,11 +1526,11 @@ static int pl011_get_poll_char(struct uart_port *port) */ pl011_quiesce_irqs(port); - status = pl011_readw(uap, REG_FR); + status = readw(uap->port.membase + REG_FR); if (status & UART01x_FR_RXFE) return NO_POLL_CHAR; - return pl011_readw(uap, REG_DR); + return readw(uap->port.membase + REG_DR); } static void pl011_put_poll_char(struct uart_port *port, @@ -1556,10 +1539,10 @@ static void pl011_put_poll_char(struct uart_port *port, struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) + while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) barrier(); - pl011_writew(uap, ch, REG_DR); + writew(ch, uap->port.membase + REG_DR); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1583,15 +1566,15 @@ static int pl011_hwinit(struct uart_port *port) uap->port.uartclk = clk_get_rate(uap->clk); /* Clear pending error and receive interrupts */ - pl011_writew(uap, UART011_OEIS | UART011_BEIS | UART011_PEIS | - UART011_FEIS | UART011_RTIS | UART011_RXIS, REG_ICR); + writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | + UART011_RTIS | UART011_RXIS, uap->port.membase + REG_ICR); /* * Save interrupts enable mask, and enable RX interrupts in case if * the interrupt is used for NMI entry. */ - uap->im = pl011_readw(uap, REG_IMSC); - pl011_writew(uap, UART011_RTIM | UART011_RXIM, REG_IMSC); + uap->im = readw(uap->port.membase + REG_IMSC); + writew(UART011_RTIM | UART011_RXIM, uap->port.membase + REG_IMSC); if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; @@ -1605,7 +1588,7 @@ static int pl011_hwinit(struct uart_port *port) static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) { - pl011_writew(uap, lcr_h, uap->lcrh_rx); + writew(lcr_h, uap->port.membase + uap->lcrh_rx); if (uap->lcrh_rx != uap->lcrh_tx) { int i; /* @@ -1613,14 +1596,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) * to get this delay write read only register 10 times */ for (i = 0; i < 10; ++i) - pl011_writew(uap, 0xff, REG_MIS); - pl011_writew(uap, lcr_h, uap->lcrh_tx); + writew(0xff, uap->port.membase + REG_MIS); + writew(lcr_h, uap->port.membase + uap->lcrh_tx); } } static int pl011_allocate_irq(struct uart_amba_port *uap) { - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); } @@ -1635,11 +1618,12 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap) spin_lock_irq(&uap->port.lock); /* Clear out any spuriously appearing RX interrupts */ - pl011_writew(uap, UART011_RTIS | UART011_RXIS, REG_ICR); + writew(UART011_RTIS | UART011_RXIS, + uap->port.membase + REG_ICR); uap->im = UART011_RTIM; if (!pl011_dma_rx_running(uap)) uap->im |= UART011_RXIM; - pl011_writew(uap, uap->im, REG_IMSC); + writew(uap->im, uap->port.membase + REG_IMSC); spin_unlock_irq(&uap->port.lock); } @@ -1658,21 +1642,21 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - pl011_writew(uap, uap->vendor->ifls, REG_IFLS); + writew(uap->vendor->ifls, uap->port.membase + REG_IFLS); spin_lock_irq(&uap->port.lock); /* restore RTS and DTR */ cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; - pl011_writew(uap, cr, REG_CR); + writew(cr, uap->port.membase + REG_CR); spin_unlock_irq(&uap->port.lock); /* * initialise the old status of the modem signals */ - uap->old_status = pl011_readw(uap, REG_FR) & + uap->old_status = readw(uap->port.membase + REG_FR) & UART01x_FR_MODEM_ANY; /* Startup DMA */ @@ -1712,11 +1696,11 @@ static int sbsa_uart_startup(struct uart_port *port) static void pl011_shutdown_channel(struct uart_amba_port *uap, unsigned int lcrh) { - unsigned long val; + unsigned long val; - val = pl011_readw(uap, lcrh); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - pl011_writew(uap, val, lcrh); + val = readw(uap->port.membase + lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + writew(val, uap->port.membase + lcrh); } /* @@ -1730,11 +1714,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap) uap->autorts = false; spin_lock_irq(&uap->port.lock); - cr = pl011_readw(uap, REG_CR); + cr = readw(uap->port.membase + REG_CR); uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - pl011_writew(uap, cr, REG_CR); + writew(cr, uap->port.membase + REG_CR); spin_unlock_irq(&uap->port.lock); /* @@ -1751,8 +1735,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap) /* mask all interrupts and clear all pending ones */ uap->im = 0; - pl011_writew(uap, uap->im, REG_IMSC); - pl011_writew(0xffff, REG_ICR); + writew(uap->im, uap->port.membase + REG_IMSC); + writew(0xffff, uap->port.membase + REG_ICR); spin_unlock_irq(&uap->port.lock); } @@ -1904,8 +1888,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, pl011_enable_ms(port); /* first, disable everything */ - old_cr = pl011_readw(uap, REG_CR); - pl011_writew(uap, 0, REG_CR); + old_cr = readw(port->membase + REG_CR); + writew(0, port->membase + REG_CR); if (termios->c_cflag & CRTSCTS) { if (old_cr & UART011_CR_RTS) @@ -1938,8 +1922,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, quot -= 2; } /* Set baud rate */ - pl011_writew(uap, quot & 0x3f, REG_FBRD); - pl011_writew(uap, quot >> 6, REG_IBRD); + writew(quot & 0x3f, port->membase + REG_FBRD); + writew(quot >> 6, port->membase + REG_IBRD); /* * ----------v----------v----------v----------v----- @@ -1948,7 +1932,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * ----------^----------^----------^----------^----- */ pl011_write_lcr_h(uap, lcr_h); - pl011_writew(uap, old_cr, REG_CR); + writew(old_cr, port->membase + REG_CR); spin_unlock_irqrestore(&port->lock, flags); } @@ -2089,9 +2073,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) + while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) barrier(); - pl011_writew(uap, ch, REG_DR); + writew(ch, uap->port.membase + REG_DR); } static void @@ -2116,10 +2100,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * First save the CR then disable the interrupts */ if (!uap->vendor->always_enabled) { - old_cr = pl011_readw(uap, REG_CR); + old_cr = readw(uap->port.membase + REG_CR); new_cr = old_cr & ~UART011_CR_CTSEN; new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - pl011_writew(uap, new_cr, REG_CR); + writew(new_cr, uap->port.membase + REG_CR); } uart_console_write(&uap->port, s, count, pl011_console_putchar); @@ -2129,10 +2113,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * and restore the TCR */ do { - status = pl011_readw(uap, REG_FR); + status = readw(uap->port.membase + REG_FR); } while (status & UART01x_FR_BUSY); if (!uap->vendor->always_enabled) - pl011_writew(uap, old_cr, REG_CR); + writew(old_cr, uap->port.membase + REG_CR); if (locked) spin_unlock(&uap->port.lock); @@ -2145,10 +2129,10 @@ static void __init pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (pl011_readw(uap, REG_CR) & UART01x_CR_UARTEN) { + if (readw(uap->port.membase + REG_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, ibrd, fbrd; - lcr_h = pl011_readw(uap, uap->lcrh_tx); + lcr_h = readw(uap->port.membase + uap->lcrh_tx); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -2163,13 +2147,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, else *bits = 8; - ibrd = pl011_readw(uap, REG_IBRD); - fbrd = pl011_readw(uap, REG_FBRD); + ibrd = readw(uap->port.membase + REG_IBRD); + fbrd = readw(uap->port.membase + REG_FBRD); *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); if (uap->vendor->oversampling) { - if (pl011_readw(uap, REG_CR) + if (readw(uap->port.membase + REG_CR) & ST_UART011_CR_OVSFACT) *baud *= 2; } @@ -2241,13 +2225,10 @@ static struct console amba_console = { static void pl011_putc(struct uart_port *port, int c) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); - - while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) + while (readl(port->membase + REG_FR) & UART01x_FR_TXFF) ; - pl011_writeb(uap, c, REG_DR); - while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY) + writeb(c, port->membase + REG_DR); + while (readl(port->membase + REG_FR) & UART01x_FR_BUSY) ; } @@ -2374,8 +2355,8 @@ static int pl011_register_port(struct uart_amba_port *uap) int ret; /* Ensure interrupts from this UART are masked and cleared */ - pl011_writew(uap, 0, REG_IMSC); - pl011_writew(uap, 0xffff, REG_ICR); + writew(0, uap->port.membase + REG_IMSC); + writew(0xffff, uap->port.membase + REG_ICR); if (!amba_reg.state) { ret = uart_register_driver(&amba_reg);