From: Stephen M. Cameron Date: Tue, 1 May 2012 16:42:51 +0000 (-0500) Subject: [SCSI] hpsa: add abort error handler function X-Git-Tag: firefly_0821_release~3680^2~2850^2~39 X-Git-Url: http://plrg.eecs.uci.edu/git/?a=commitdiff_plain;h=75167d2cc7654f57b90497fe90b1f0ae946c22a6;p=firefly-linux-kernel-4.4.55.git [SCSI] hpsa: add abort error handler function Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 1ceea8a42ee7..a2c99245b82c 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -159,6 +159,7 @@ static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason); static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); +static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd); static int hpsa_slave_alloc(struct scsi_device *sdev); static void hpsa_slave_destroy(struct scsi_device *sdev); @@ -180,6 +181,7 @@ static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev, static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id); static int __devinit hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr, int wait_for_ready); +static inline void finish_cmd(struct CommandList *c); #define BOARD_NOT_READY 0 #define BOARD_READY 1 @@ -507,6 +509,7 @@ static struct scsi_host_template hpsa_driver_template = { .change_queue_depth = hpsa_change_queue_depth, .this_id = -1, .use_clustering = ENABLE_CLUSTERING, + .eh_abort_handler = hpsa_eh_abort_handler, .eh_device_reset_handler = hpsa_eh_device_reset_handler, .ioctl = hpsa_ioctl, .slave_alloc = hpsa_slave_alloc, @@ -2352,6 +2355,191 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) return FAILED; } +static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, + struct CommandList *abort) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -ENOMEM; + } + + fill_cmd(c, HPSA_ABORT_MSG, h, abort, 0, 0, scsi3addr, TYPE_MSG); + hpsa_scsi_do_simple_cmd_core(h, c); + dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd_core completed.\n", + __func__, abort->Header.Tag.upper, abort->Header.Tag.lower); + /* no unmap needed here because no data xfer. */ + + ei = c->err_info; + switch (ei->CommandStatus) { + case CMD_SUCCESS: + break; + case CMD_UNABORTABLE: /* Very common, don't make noise. */ + rc = -1; + break; + default: + dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: interpreting error.\n", + __func__, abort->Header.Tag.upper, + abort->Header.Tag.lower); + hpsa_scsi_interpret_error(c); + rc = -1; + break; + } + cmd_special_free(h, c); + dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n", __func__, + abort->Header.Tag.upper, abort->Header.Tag.lower); + return rc; +} + +/* + * hpsa_find_cmd_in_queue + * + * Used to determine whether a command (find) is still present + * in queue_head. Optionally excludes the last element of queue_head. + * + * This is used to avoid unnecessary aborts. Commands in h->reqQ have + * not yet been submitted, and so can be aborted by the driver without + * sending an abort to the hardware. + * + * Returns pointer to command if found in queue, NULL otherwise. + */ +static struct CommandList *hpsa_find_cmd_in_queue(struct ctlr_info *h, + struct scsi_cmnd *find, struct list_head *queue_head) +{ + unsigned long flags; + struct CommandList *c = NULL; /* ptr into cmpQ */ + + if (!find) + return 0; + spin_lock_irqsave(&h->lock, flags); + list_for_each_entry(c, queue_head, list) { + if (c->scsi_cmd == NULL) /* e.g.: passthru ioctl */ + continue; + if (c->scsi_cmd == find) { + spin_unlock_irqrestore(&h->lock, flags); + return c; + } + } + spin_unlock_irqrestore(&h->lock, flags); + return NULL; +} + +/* Send an abort for the specified command. + * If the device and controller support it, + * send a task abort request. + */ +static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) +{ + + int i, rc; + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + struct CommandList *abort; /* pointer to command to be aborted */ + struct CommandList *found; + struct scsi_cmnd *as; /* ptr to scsi cmd inside aborted command. */ + char msg[256]; /* For debug messaging. */ + int ml = 0; + + /* Find the controller of the command to be aborted */ + h = sdev_to_hba(sc->device); + if (WARN(h == NULL, + "ABORT REQUEST FAILED, Controller lookup failed.\n")) + return FAILED; + + /* Check that controller supports some kind of task abort */ + if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) && + !(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags)) + return FAILED; + + memset(msg, 0, sizeof(msg)); + ml += sprintf(msg+ml, "ABORT REQUEST on C%d:B%d:T%d:L%d ", + h->scsi_host->host_no, sc->device->channel, + sc->device->id, sc->device->lun); + + /* Find the device of the command to be aborted */ + dev = sc->device->hostdata; + if (!dev) { + dev_err(&h->pdev->dev, "%s FAILED, Device lookup failed.\n", + msg); + return FAILED; + } + + /* Get SCSI command to be aborted */ + abort = (struct CommandList *) sc->host_scribble; + if (abort == NULL) { + dev_err(&h->pdev->dev, "%s FAILED, Command to abort is NULL.\n", + msg); + return FAILED; + } + + ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", + abort->Header.Tag.upper, abort->Header.Tag.lower); + as = (struct scsi_cmnd *) abort->scsi_cmd; + if (as != NULL) + ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ", + as->cmnd[0], as->serial_number); + dev_dbg(&h->pdev->dev, "%s\n", msg); + dev_warn(&h->pdev->dev, "Abort request on C%d:B%d:T%d:L%d\n", + h->scsi_host->host_no, dev->bus, dev->target, dev->lun); + + /* Search reqQ to See if command is queued but not submitted, + * if so, complete the command with aborted status and remove + * it from the reqQ. + */ + found = hpsa_find_cmd_in_queue(h, sc, &h->reqQ); + if (found) { + found->err_info->CommandStatus = CMD_ABORTED; + finish_cmd(found); + dev_info(&h->pdev->dev, "%s Request SUCCEEDED (driver queue).\n", + msg); + return SUCCESS; + } + + /* not in reqQ, if also not in cmpQ, must have already completed */ + found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ); + if (!found) { + dev_dbg(&h->pdev->dev, "%s Request FAILED (not known to driver).\n", + msg); + return SUCCESS; + } + + /* + * Command is in flight, or possibly already completed + * by the firmware (but not to the scsi mid layer) but we can't + * distinguish which. Send the abort down. + */ + rc = hpsa_send_abort(h, dev->scsi3addr, abort); + if (rc != 0) { + dev_dbg(&h->pdev->dev, "%s Request FAILED.\n", msg); + dev_warn(&h->pdev->dev, "FAILED abort on device C%d:B%d:T%d:L%d\n", + h->scsi_host->host_no, + dev->bus, dev->target, dev->lun); + return FAILED; + } + dev_info(&h->pdev->dev, "%s REQUEST SUCCEEDED.\n", msg); + + /* If the abort(s) above completed and actually aborted the + * command, then the command to be aborted should already be + * completed. If not, wait around a bit more to see if they + * manage to complete normally. + */ +#define ABORT_COMPLETE_WAIT_SECS 30 + for (i = 0; i < ABORT_COMPLETE_WAIT_SECS * 10; i++) { + found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ); + if (!found) + return SUCCESS; + msleep(100); + } + dev_warn(&h->pdev->dev, "%s FAILED. Aborted command has not completed after %d seconds.\n", + msg, ABORT_COMPLETE_WAIT_SECS); + return FAILED; +} + + /* * For operations that cannot sleep, a command block is allocated at init, * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track @@ -2884,6 +3072,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, int cmd_type) { int pci_dir = XFER_NONE; + struct CommandList *a; /* for commands to be aborted */ c->cmd_type = CMD_IOCTL_PEND; c->Header.ReplyQueue = 0; @@ -2967,8 +3156,35 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.CDB[5] = 0x00; c->Request.CDB[6] = 0x00; c->Request.CDB[7] = 0x00; + break; + case HPSA_ABORT_MSG: + a = buff; /* point to command to be aborted */ + dev_dbg(&h->pdev->dev, "Abort Tag:0x%08x:%08x using request Tag:0x%08x:%08x\n", + a->Header.Tag.upper, a->Header.Tag.lower, + c->Header.Tag.upper, c->Header.Tag.lower); + c->Request.CDBLen = 16; + c->Request.Type.Type = TYPE_MSG; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_WRITE; + c->Request.Timeout = 0; /* Don't time out */ + c->Request.CDB[0] = HPSA_TASK_MANAGEMENT; + c->Request.CDB[1] = HPSA_TMF_ABORT_TASK; + c->Request.CDB[2] = 0x00; /* reserved */ + c->Request.CDB[3] = 0x00; /* reserved */ + /* Tag to abort goes in CDB[4]-CDB[11] */ + c->Request.CDB[4] = a->Header.Tag.lower & 0xFF; + c->Request.CDB[5] = (a->Header.Tag.lower >> 8) & 0xFF; + c->Request.CDB[6] = (a->Header.Tag.lower >> 16) & 0xFF; + c->Request.CDB[7] = (a->Header.Tag.lower >> 24) & 0xFF; + c->Request.CDB[8] = a->Header.Tag.upper & 0xFF; + c->Request.CDB[9] = (a->Header.Tag.upper >> 8) & 0xFF; + c->Request.CDB[10] = (a->Header.Tag.upper >> 16) & 0xFF; + c->Request.CDB[11] = (a->Header.Tag.upper >> 24) & 0xFF; + c->Request.CDB[12] = 0x00; /* reserved */ + c->Request.CDB[13] = 0x00; /* reserved */ + c->Request.CDB[14] = 0x00; /* reserved */ + c->Request.CDB[15] = 0x00; /* reserved */ break; - default: dev_warn(&h->pdev->dev, "unknown message type %d\n", cmd); @@ -3848,6 +4064,9 @@ static void __devinit hpsa_find_board_params(struct ctlr_info *h) h->maxsgentries = 31; /* default to traditional values */ h->chainsize = 0; } + + /* Find out what task management functions are supported and cache */ + h->TMFSupportFlags = readl(&(h->cfgtable->TMFSupportFlags)); } static inline bool hpsa_CISS_signature_present(struct ctlr_info *h) diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 48f78123d1e6..d8aa95c43f4d 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -125,6 +125,27 @@ struct ctlr_info { u64 last_heartbeat_timestamp; u32 lockup_detected; struct list_head lockup_list; + u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */ +#define HPSATMF_BITS_SUPPORTED (1 << 0) +#define HPSATMF_PHYS_LUN_RESET (1 << 1) +#define HPSATMF_PHYS_NEX_RESET (1 << 2) +#define HPSATMF_PHYS_TASK_ABORT (1 << 3) +#define HPSATMF_PHYS_TSET_ABORT (1 << 4) +#define HPSATMF_PHYS_CLEAR_ACA (1 << 5) +#define HPSATMF_PHYS_CLEAR_TSET (1 << 6) +#define HPSATMF_PHYS_QRY_TASK (1 << 7) +#define HPSATMF_PHYS_QRY_TSET (1 << 8) +#define HPSATMF_PHYS_QRY_ASYNC (1 << 9) +#define HPSATMF_MASK_SUPPORTED (1 << 16) +#define HPSATMF_LOG_LUN_RESET (1 << 17) +#define HPSATMF_LOG_NEX_RESET (1 << 18) +#define HPSATMF_LOG_TASK_ABORT (1 << 19) +#define HPSATMF_LOG_TSET_ABORT (1 << 20) +#define HPSATMF_LOG_CLEAR_ACA (1 << 21) +#define HPSATMF_LOG_CLEAR_TSET (1 << 22) +#define HPSATMF_LOG_QRY_TASK (1 << 23) +#define HPSATMF_LOG_QRY_TSET (1 << 24) +#define HPSATMF_LOG_QRY_ASYNC (1 << 25) }; #define HPSA_ABORT_MSG 0 #define HPSA_DEVICE_RESET_MSG 1 diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 8049815d8c1e..14b56c93cefa 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -82,6 +82,29 @@ #define TYPE_CMD 0x00 #define TYPE_MSG 0x01 +/* Message Types */ +#define HPSA_TASK_MANAGEMENT 0x00 +#define HPSA_RESET 0x01 +#define HPSA_SCAN 0x02 +#define HPSA_NOOP 0x03 + +#define HPSA_CTLR_RESET_TYPE 0x00 +#define HPSA_BUS_RESET_TYPE 0x01 +#define HPSA_TARGET_RESET_TYPE 0x03 +#define HPSA_LUN_RESET_TYPE 0x04 +#define HPSA_NEXUS_RESET_TYPE 0x05 + +/* Task Management Functions */ +#define HPSA_TMF_ABORT_TASK 0x00 +#define HPSA_TMF_ABORT_TASK_SET 0x01 +#define HPSA_TMF_CLEAR_ACA 0x02 +#define HPSA_TMF_CLEAR_TASK_SET 0x03 +#define HPSA_TMF_QUERY_TASK 0x04 +#define HPSA_TMF_QUERY_TASK_SET 0x05 +#define HPSA_TMF_QUERY_ASYNCEVENT 0x06 + + + /* config space register offsets */ #define CFG_VENDORID 0x00 #define CFG_DEVICEID 0x02 @@ -337,11 +360,17 @@ struct CfgTable { u32 MaxPhysicalDevices; u32 MaxPhysicalDrivesPerLogicalUnit; u32 MaxPerformantModeCommands; - u8 reserved[0x78 - 0x58]; + u32 MaxBlockFetch; + u32 PowerConservationSupport; + u32 PowerConservationEnable; + u32 TMFSupportFlags; + u8 TMFTagMask[8]; + u8 reserved[0x78 - 0x70]; u32 misc_fw_support; /* offset 0x78 */ #define MISC_FW_DOORBELL_RESET (0x02) #define MISC_FW_DOORBELL_RESET2 (0x010) u8 driver_version[32]; + }; #define NUM_BLOCKFETCH_ENTRIES 8