[WATCHDOG] i6300esb.c: Restructure initialization of the device
authorWim Van Sebroeck <wim@iguana.be>
Wed, 25 Mar 2009 19:16:28 +0000 (19:16 +0000)
committerWim Van Sebroeck <wim@iguana.be>
Wed, 8 Apr 2009 06:06:50 +0000 (06:06 +0000)
The i6300ESB watchdog should be stopped before userspace has access to the
watchdog. So fix this and restructure the initialization sequence into:
* See if we have a i6300 device
* make sure that we have valid module parameters
* Initialize the device
* register the /dev/watchdog device so that userspace has access

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
drivers/watchdog/i6300esb.c

index 8a0ef65a0691c21bdda0ef482772755c5c7dc1b4..7ba0b11ec525d2bd84f4ebfe72b4e0e5912ff2b4 100644 (file)
@@ -123,7 +123,7 @@ static int esb_timer_start(void)
        esb_unlock_registers();
        writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
        /* Enable or Enable + Lock? */
-       val = 0x02 | (nowayout ? 0x01 : 0x00);
+       val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
        pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
        spin_unlock(&esb_lock);
        return 0;
@@ -143,7 +143,7 @@ static int esb_timer_stop(void)
        spin_unlock(&esb_lock);
 
        /* Returns 0 if the timer was disabled, non-zero otherwise */
-       return val & 0x01;
+       return val & ESB_WDT_ENABLE;
 }
 
 static void esb_timer_keepalive(void)
@@ -350,8 +350,6 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
 
 static unsigned char __devinit esb_getdevice(void)
 {
-       u8 val1;
-       unsigned short val2;
        /*
         *      Find the PCI device
         */
@@ -359,67 +357,79 @@ static unsigned char __devinit esb_getdevice(void)
        esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
                                        PCI_DEVICE_ID_INTEL_ESB_9, NULL);
 
-       if (esb_pci) {
-               if (pci_enable_device(esb_pci)) {
-                       printk(KERN_ERR PFX "failed to enable device\n");
-                       goto err_devput;
-               }
+       if (!esb_pci)
+               return 0;
 
-               if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
-                       printk(KERN_ERR PFX "failed to request region\n");
-                       goto err_disable;
-               }
+       if (pci_enable_device(esb_pci)) {
+               printk(KERN_ERR PFX "failed to enable device\n");
+               goto err_devput;
+       }
 
-               BASEADDR = pci_ioremap_bar(esb_pci, 0);
-               if (BASEADDR == NULL) {
-                       /* Something's wrong here, BASEADDR has to be set */
-                       printk(KERN_ERR PFX "failed to get BASEADDR\n");
-                       goto err_release;
-               }
+       if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+               printk(KERN_ERR PFX "failed to request region\n");
+               goto err_disable;
+       }
 
-               /*
-                * The watchdog has two timers, it can be setup so that the
-                * expiry of timer1 results in an interrupt and the expiry of
-                * timer2 results in a reboot. We set it to not generate
-                * any interrupts as there is not much we can do with it
-                * right now.
-                *
-                * We also enable reboots and set the timer frequency to
-                * the PCI clock divided by 2^15 (approx 1KHz).
-                */
-               pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
-
-               /* Check that the WDT isn't already locked */
-               pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
-               if (val1 & ESB_WDT_LOCK)
-                       printk(KERN_WARNING PFX "nowayout already set\n");
-
-               /* Set the timer to watchdog mode and disable it for now */
-               pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
-
-               /* Check if the watchdog was previously triggered */
-               esb_unlock_registers();
-               val2 = readw(ESB_RELOAD_REG);
-               if (val2 & ESB_WDT_TIMEOUT)
-                       triggered = WDIOF_CARDRESET;
-
-               /* Reset trigger flag and timers */
-               esb_unlock_registers();
-               writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
-
-               /* Done */
-               return 1;
+       BASEADDR = pci_ioremap_bar(esb_pci, 0);
+       if (BASEADDR == NULL) {
+               /* Something's wrong here, BASEADDR has to be set */
+               printk(KERN_ERR PFX "failed to get BASEADDR\n");
+               goto err_release;
+       }
+
+       /* Done */
+       return 1;
 
 err_release:
-               pci_release_region(esb_pci, 0);
+       pci_release_region(esb_pci, 0);
 err_disable:
-               pci_disable_device(esb_pci);
+       pci_disable_device(esb_pci);
 err_devput:
-               pci_dev_put(esb_pci);
-       }
+       pci_dev_put(esb_pci);
        return 0;
 }
 
+static void __devinit esb_initdevice(void)
+{
+       u8 val1;
+       u16 val2;
+
+       /*
+        * Config register:
+        * Bit    5 : 0 = Enable WDT_OUTPUT
+        * Bit    2 : 0 = set the timer frequency to the PCI clock
+        * divided by 2^15 (approx 1KHz).
+        * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
+        * The watchdog has two timers, it can be setup so that the
+        * expiry of timer1 results in an interrupt and the expiry of
+        * timer2 results in a reboot. We set it to not generate
+        * any interrupts as there is not much we can do with it
+        * right now.
+        */
+       pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
+
+       /* Check that the WDT isn't already locked */
+       pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
+       if (val1 & ESB_WDT_LOCK)
+               printk(KERN_WARNING PFX "nowayout already set\n");
+
+       /* Set the timer to watchdog mode and disable it for now */
+       pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
+
+       /* Check if the watchdog was previously triggered */
+       esb_unlock_registers();
+       val2 = readw(ESB_RELOAD_REG);
+       if (val2 & ESB_WDT_TIMEOUT)
+               triggered = WDIOF_CARDRESET;
+
+       /* Reset WDT_TIMEOUT flag and timers */
+       esb_unlock_registers();
+       writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
+
+       /* And set the correct timeout value */
+       esb_timer_set_heartbeat(heartbeat);
+}
+
 static int __devinit esb_probe(struct platform_device *dev)
 {
        int ret;
@@ -430,13 +440,17 @@ static int __devinit esb_probe(struct platform_device *dev)
 
        /* Check that the heartbeat value is within it's range;
           if not reset to the default */
-       if (esb_timer_set_heartbeat(heartbeat)) {
-               esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
+       if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
+               heartbeat = WATCHDOG_HEARTBEAT;
                printk(KERN_INFO PFX
                        "heartbeat value must be 1<heartbeat<2046, using %d\n",
                                                                heartbeat);
        }
 
+       /* Initialize the watchdog and make sure it does not run */
+       esb_initdevice();
+
+       /* Register the watchdog so that userspace has access to it */
        ret = misc_register(&esb_miscdev);
        if (ret != 0) {
                printk(KERN_ERR PFX
@@ -444,7 +458,6 @@ static int __devinit esb_probe(struct platform_device *dev)
                                                        WATCHDOG_MINOR, ret);
                goto err_unmap;
        }
-       esb_timer_stop();
        printk(KERN_INFO PFX
                "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
                                                BASEADDR, heartbeat, nowayout);
@@ -452,11 +465,8 @@ static int __devinit esb_probe(struct platform_device *dev)
 
 err_unmap:
        iounmap(BASEADDR);
-/* err_release: */
        pci_release_region(esb_pci, 0);
-/* err_disable: */
        pci_disable_device(esb_pci);
-/* err_devput: */
        pci_dev_put(esb_pci);
        return ret;
 }