Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
+ config DEBUG_STI_UART
+ depends on ARCH_STI
+ bool "Use StiH415/416 ASC for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on StiH415/416 based platforms like B2000, B2020.
+ It support UART2 and SBC_UART1.
+
+ If unsure, say N.
+
config DEBUG_U300_UART
bool "Kernel low-level debugging messages via U300 UART0"
depends on ARCH_U300
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
- config DEBUG_STI_UART
- depends on ARCH_STI
- bool "Use StiH415/416 ASC for low-level debug"
- help
- Say Y here if you want kernel low-level debugging support
- on StiH415/416 based platforms like B2000, B2020.
- It support UART2 and SBC_UART1.
-
- If unsure, say N.
-
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
regulator-name = "vdd_vbus_wup1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ enable-active-high;
gpio = <&gpio 24 0>; /* PD0 */
};
};
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ enable-active-high;
gpio = <&gpio 170 0>; /* PV2 */
};
};
regulator-name = "vbus1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ enable-active-high;
gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
};
regulator-name = "vbus3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ enable-active-high;
gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
};
};
-CONFIG_EXPERIMENTAL=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
-CONFIG_ARCH_SIRF=y
CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_BCM=y
+CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX53=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_VF610=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SOC_OMAP5=y
+CONFIG_SOC_AM43XX=y
+CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SOCFPGA=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_WM8850=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-CONFIG_ARCH_ZYNQ=y
-CONFIG_ARM_ERRATA_754322=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
+CONFIG_ARCH_STI=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SIRF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
+CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_TEGRA_PCI=y
+CONFIG_TEGRA_EMC_SCALING_ENABLE=y
+CONFIG_ARCH_U8500=y
+CONFIG_MACH_SNOWBALL=y
+CONFIG_MACH_UX500_DT=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VIRT=y
+CONFIG_ARCH_WM8850=y
+CONFIG_ARCH_ZYNQ=y
CONFIG_SMP=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-CONFIG_NEON=y
CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
-CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
-CONFIG_SUN4I_EMAC=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
+CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
-CONFIG_MDIO_SUN4I=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
-CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_SIRFSOC=y
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_IPMI_HANDLER=y
-CONFIG_IPMI_SI=y
-CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y
+CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_SPI_SIRF=y
-CONFIG_GPIO_PL061=y
-CONFIG_FB=y
+CONFIG_SPI_TEGRA114=y
+CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_TPS51632=y
+CONFIG_REGULATOR_TPS62360=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_VEXPRESS=y
+CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
+CONFIG_DRM_TEGRA=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FB_SIMPLE=y
CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_AB8500_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_USB3=y
+CONFIG_SAMSUNG_USB2PHY=y
+CONFIG_SAMSUNG_USB3PHY=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=y
+CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
-CONFIG_MMC_WMT=y
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_VT8500=y
-CONFIG_PWM=y
-CONFIG_PWM_VT8500=y
+CONFIG_RTC_DRV_TEGRA=y
CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_SIRF_DMA=y
CONFIG_DW_DMAC=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_STE_DMA40=y
+CONFIG_SIRF_DMA=y
+CONFIG_TI_EDMA=y
+CONFIG_PL330_DMA=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+CONFIG_MXS_DMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_PWM=y
+CONFIG_PWM_VT8500=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_AM33XX=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
depends on ARCH_EXYNOS4
select ARM_CPU_SUSPEND if PM
select PINCTRL_EXYNOS
- select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
*
*/
-#include <mach/hardware.h>
+#include <mach/ixp4xx-regs.h>
/*
* We use IXP425 General purpose timer for our timer needs, it runs at
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
+
static struct resource omixp_flash_resources[] = {
{
.flags = IORESOURCE_MEM,
config ARCH_OMAP
bool
-config ARCH_OMAP2PLUS
- bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
- select ARCH_HAS_CPUFREQ
- select ARCH_HAS_BANDGAP
- select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_OMAP
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
- select GENERIC_IRQ_CHIP
- select HAVE_CLK
- select OMAP_DM_TIMER
- select PINCTRL
- select PROC_DEVICETREE if PROC_FS
- select SOC_BUS
- select SPARSE_IRQ
- select TI_PRIV_EDMA
- select USE_OF
- help
- Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
-
-
-if ARCH_OMAP2PLUS
-
-menu "TI OMAP2/3/4 Specific Features"
-
-config ARCH_OMAP2PLUS_TYPICAL
- bool "Typical OMAP configuration"
- default y
- select AEABI
- select HIGHMEM
- select I2C
- select I2C_OMAP
- select MENELAUS if ARCH_OMAP2
- select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select PM_RUNTIME
- select REGULATOR
- select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
- select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
- select VFP
- help
- Compile a kernel suitable for booting most boards
-
-config SOC_HAS_OMAP2_SDRC
- bool "OMAP2 SDRAM Controller support"
-
-config SOC_HAS_REALTIME_COUNTER
- bool "Real time free running counter"
- depends on SOC_OMAP5
- default y
-
config ARCH_OMAP2
bool "TI OMAP2"
- depends on ARCH_OMAP2PLUS
depends on ARCH_MULTI_V6
- default y
+ select ARCH_OMAP2PLUS
select CPU_V6
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
bool "TI OMAP3"
- depends on ARCH_OMAP2PLUS
depends on ARCH_MULTI_V7
- default y
+ select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select CPU_V7
config ARCH_OMAP4
bool "TI OMAP4"
- default y
- depends on ARCH_OMAP2PLUS
depends on ARCH_MULTI_V7
+ select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND if PM
config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
+ select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if LOCAL_TIMERS
select HAVE_SMP
select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181
+config SOC_AM33XX
+ bool "AM33XX support"
+ depends on ARCH_MULTI_V7
+ select ARCH_OMAP2PLUS
+ select ARM_CPU_SUSPEND if PM
+ select CPU_V7
+ select MULTI_IRQ_HANDLER
+ select COMMON_CLK
+
+config SOC_AM43XX
+ bool "TI AM43x"
+ depends on ARCH_MULTI_V7
+ select CPU_V7
+ select ARCH_OMAP2PLUS
+ select MULTI_IRQ_HANDLER
+ select ARM_GIC
+ select COMMON_CLK
+ select MACH_OMAP_GENERIC
+
+config ARCH_OMAP2PLUS
+ bool
+ select ARCH_HAS_BANDGAP
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_OMAP
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select HAVE_CLK
+ select OMAP_DM_TIMER
+ select PINCTRL
+ select PROC_DEVICETREE if PROC_FS
+ select SOC_BUS
+ select SPARSE_IRQ
+ select TI_PRIV_EDMA
+ select USE_OF
+ help
+ Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
+
+
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+ bool "Typical OMAP configuration"
+ default y
+ select AEABI
+ select HIGHMEM
+ select I2C
+ select I2C_OMAP
+ select MENELAUS if ARCH_OMAP2
+ select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+ select PM_RUNTIME
+ select REGULATOR
+ select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+ select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+ select VFP
+ help
+ Compile a kernel suitable for booting most boards
+
+config SOC_HAS_OMAP2_SDRC
+ bool "OMAP2 SDRAM Controller support"
+
+config SOC_HAS_REALTIME_COUNTER
+ bool "Real time free running counter"
+ depends on SOC_OMAP5
+ default y
+
comment "OMAP Core Type"
depends on ARCH_OMAP2
depends on ARCH_OMAP3
default y
-config SOC_AM33XX
- bool "AM33XX support"
- depends on ARCH_MULTI_V7
- default y
- select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
- select COMMON_CLK
-
-config SOC_AM43XX
- bool "TI AM43x"
- select CPU_V7
- select MULTI_IRQ_HANDLER
- select ARM_GIC
- select COMMON_CLK
- select MACH_OMAP_GENERIC
-
config OMAP_PACKAGE_ZAF
bool
omap_pm_if_early_init();
}
-static void __init omap_common_late_init(void)
+static void __init __maybe_unused omap_common_late_init(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
static struct resource gio3_resources[] = {
[0] = {
.name = "GIO_096",
- .start = 0xe0050100,
- .end = 0xe005012b,
+ .start = 0xe0050180,
+ .end = 0xe00501ab,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "GIO_096",
- .start = 0xe0050140,
- .end = 0xe005015f,
+ .start = 0xe00501c0,
+ .end = 0xe00501df,
.flags = IORESOURCE_MEM,
},
[2] = {
static const struct plat_sci_port scif[] = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
- SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
+ SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
NULL
};
-MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
+DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.smp = smp_ops(zynq_smp_ops),
.map_io = zynq_map_io,
.init_machine = zynq_init_machine,
projects / firefly-linux-kernel-4.4.55.git / commitdiff