Input: tca8418_keypad - add support for device tree bindings
authorAlban Bedel <alban.bedel@avionic-design.de>
Mon, 5 Nov 2012 18:55:25 +0000 (10:55 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Thu, 29 Nov 2012 17:28:50 +0000 (09:28 -0800)
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Documentation/devicetree/bindings/input/tca8418_keypad.txt [new file with mode: 0644]
drivers/input/keyboard/tca8418_keypad.c

diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
new file mode 100644 (file)
index 0000000..2a1538f
--- /dev/null
@@ -0,0 +1,8 @@
+
+Required properties:
+- compatible: "ti,tca8418"
+- reg: the I2C address
+- interrupts: IRQ line number, should trigger on falling edge
+- keypad,num-rows: The number of rows
+- keypad,num-columns: The number of columns
+- linux,keymap: Keys definitions, see keypad-matrix.
index f1e966bdcff5de8eabfe5efb1da59b808b2736e4..1a2894dd03caef705dd8870a76118718ffefa4db 100644 (file)
@@ -35,6 +35,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/tca8418_keypad.h>
+#include <linux/of.h>
 
 /* TCA8418 hardware limits */
 #define TCA8418_MAX_ROWS       8
@@ -116,10 +117,15 @@ static const struct i2c_device_id tca8418_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tca8418_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id tca8418_dt_ids[] __devinitconst = {
+       { .compatible = "ti,tca8418", },
+       { }
+};
+MODULE_DEVICE_TABLE(of, tca8418_dt_ids);
+#endif
+
 struct tca8418_keypad {
-       unsigned int rows;
-       unsigned int cols;
-       unsigned int keypad_mask; /* Mask for keypad col/rol regs */
        unsigned int irq;
        unsigned int row_shift;
 
@@ -241,7 +247,8 @@ exit:
 /*
  * Configure the TCA8418 for keypad operation
  */
-static int tca8418_configure(struct tca8418_keypad *keypad_data)
+static int tca8418_configure(struct tca8418_keypad *keypad_data,
+                            u32 rows, u32 cols)
 {
        int reg, error;
 
@@ -253,9 +260,8 @@ static int tca8418_configure(struct tca8418_keypad *keypad_data)
 
 
        /* Assemble a mask for row and column registers */
-       reg  =  ~(~0 << keypad_data->rows);
-       reg += (~(~0 << keypad_data->cols)) << 8;
-       keypad_data->keypad_mask = reg;
+       reg  =  ~(~0 << rows);
+       reg += (~(~0 << cols)) << 8;
 
        /* Set registers to keypad mode */
        error |= tca8418_write_byte(keypad_data, REG_KP_GPIO1, reg);
@@ -277,25 +283,36 @@ static int tca8418_keypad_probe(struct i2c_client *client,
                                                client->dev.platform_data;
        struct tca8418_keypad *keypad_data;
        struct input_dev *input;
+       const struct matrix_keymap_data *keymap_data = NULL;
+       u32 rows = 0, cols = 0;
+       bool rep = false;
+       bool irq_is_gpio = false;
        int error, row_shift, max_keys;
 
        /* Copy the platform data */
-       if (!pdata) {
-               dev_dbg(&client->dev, "no platform data\n");
-               return -EINVAL;
+       if (pdata) {
+               if (!pdata->keymap_data) {
+                       dev_err(&client->dev, "no keymap data defined\n");
+                       return -EINVAL;
+               }
+               keymap_data = pdata->keymap_data;
+               rows = pdata->rows;
+               cols = pdata->cols;
+               rep  = pdata->rep;
+               irq_is_gpio = pdata->irq_is_gpio;
+       } else {
+               struct device_node *np = client->dev.of_node;
+               of_property_read_u32(np, "keypad,num-rows", &rows);
+               of_property_read_u32(np, "keypad,num-columns", &cols);
+               rep = of_property_read_bool(np, "keypad,autorepeat");
        }
 
-       if (!pdata->keymap_data) {
-               dev_err(&client->dev, "no keymap data defined\n");
-               return -EINVAL;
-       }
-
-       if (!pdata->rows || pdata->rows > TCA8418_MAX_ROWS) {
+       if (!rows || rows > TCA8418_MAX_ROWS) {
                dev_err(&client->dev, "invalid rows\n");
                return -EINVAL;
        }
 
-       if (!pdata->cols || pdata->cols > TCA8418_MAX_COLS) {
+       if (!cols || cols > TCA8418_MAX_COLS) {
                dev_err(&client->dev, "invalid columns\n");
                return -EINVAL;
        }
@@ -307,8 +324,8 @@ static int tca8418_keypad_probe(struct i2c_client *client,
                return -ENODEV;
        }
 
-       row_shift = get_count_order(pdata->cols);
-       max_keys = pdata->rows << row_shift;
+       row_shift = get_count_order(cols);
+       max_keys = rows << row_shift;
 
        /* Allocate memory for keypad_data, keymap and input device */
        keypad_data = kzalloc(sizeof(*keypad_data) +
@@ -316,13 +333,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
        if (!keypad_data)
                return -ENOMEM;
 
-       keypad_data->rows = pdata->rows;
-       keypad_data->cols = pdata->cols;
        keypad_data->client = client;
        keypad_data->row_shift = row_shift;
 
        /* Initialize the chip or fail if chip isn't present */
-       error = tca8418_configure(keypad_data);
+       error = tca8418_configure(keypad_data, rows, cols);
        if (error < 0)
                goto fail1;
 
@@ -342,21 +357,20 @@ static int tca8418_keypad_probe(struct i2c_client *client,
        input->id.product = 0x001;
        input->id.version = 0x0001;
 
-       error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
-                                          pdata->rows, pdata->cols,
+       error = matrix_keypad_build_keymap(keymap_data, NULL, rows, cols,
                                           keypad_data->keymap, input);
        if (error) {
                dev_dbg(&client->dev, "Failed to build keymap\n");
                goto fail2;
        }
 
-       if (pdata->rep)
+       if (rep)
                __set_bit(EV_REP, input->evbit);
        input_set_capability(input, EV_MSC, MSC_SCAN);
 
        input_set_drvdata(input, keypad_data);
 
-       if (pdata->irq_is_gpio)
+       if (irq_is_gpio)
                client->irq = gpio_to_irq(client->irq);
 
        error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
@@ -401,11 +415,11 @@ static int tca8418_keypad_remove(struct i2c_client *client)
        return 0;
 }
 
-
 static struct i2c_driver tca8418_keypad_driver = {
        .driver = {
                .name   = TCA8418_NAME,
                .owner  = THIS_MODULE,
+               .of_match_table = of_match_ptr(tca8418_dt_ids),
        },
        .probe          = tca8418_keypad_probe,
        .remove         = tca8418_keypad_remove,