drm/i915: tame the chattermouth (v2)
authorRob Clark <robdclark@gmail.com>
Mon, 15 Dec 2014 18:56:32 +0000 (13:56 -0500)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Tue, 16 Dec 2014 09:39:13 +0000 (10:39 +0100)
Many distro's have mechanism in place to collect and automatically file
bugs for failed WARN()s.  And since i915 has a lot of hw state sanity
checks which result in WARN(), it generates quite a lot of noise which
is somewhat disconcerting to the end user.

Separate out the internal hw-is-in-the-state-I-expected checks into
I915_STATE_WARN()s and allow configuration via i915.verbose_checks module
param about whether this will generate a full blown stacktrace or just
DRM_ERROR().  The new moduleparam defaults to true, so by default there
is no change in behavior.  And even when disabled, you will still get
an error message logged.

v2: paint the macro names blue, clarify that the default behavior
    remains the same as before

Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_params.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
drivers/gpu/drm/i915/intel_runtime_pm.c

index eb4d64fecf8ab23a1ff34c0651dd815fa1ec6874..f3185293bed1cab73d067598f5cb5b6228ec817c 100644 (file)
 #define MISSING_CASE(x) WARN(1, "Missing switch case (%lu) in %s\n", \
                             (long) (x), __func__);
 
+/* Use I915_STATE_WARN(x) and I915_STATE_WARN_ON() (rather than WARN() and
+ * WARN_ON()) for hw state sanity checks to check for unexpected conditions
+ * which may not necessarily be a user visible problem.  This will either
+ * WARN() or DRM_ERROR() depending on the verbose_checks moduleparam, to
+ * enable distros and users to tailor their preferred amount of i915 abrt
+ * spam.
+ */
+#define I915_STATE_WARN(condition, format...) ({                       \
+       int __ret_warn_on = !!(condition);                              \
+       if (unlikely(__ret_warn_on)) {                                  \
+               if (i915.verbose_state_checks)                          \
+                       __WARN_printf(format);                          \
+               else                                                    \
+                       DRM_ERROR(format);                              \
+       }                                                               \
+       unlikely(__ret_warn_on);                                        \
+})
+
+#define I915_STATE_WARN_ON(condition) ({                               \
+       int __ret_warn_on = !!(condition);                              \
+       if (unlikely(__ret_warn_on)) {                                  \
+               if (i915.verbose_state_checks)                          \
+                       __WARN_printf("WARN_ON(" #condition ")\n");     \
+               else                                                    \
+                       DRM_ERROR("WARN_ON(" #condition ")\n");         \
+       }                                                               \
+       unlikely(__ret_warn_on);                                        \
+})
+
 enum pipe {
        INVALID_PIPE = -1,
        PIPE_A = 0,
@@ -2401,6 +2430,7 @@ struct i915_params {
        bool disable_vtd_wa;
        int use_mmio_flip;
        bool mmio_debug;
+       bool verbose_state_checks;
 };
 extern struct i915_params i915 __read_mostly;
 
index f6af6d4c775cb05ab562dd6f10599bdba0a1bb5c..07252d8dc726ad42a4b0081aea291415107c59c9 100644 (file)
@@ -51,6 +51,7 @@ struct i915_params i915 __read_mostly = {
        .disable_vtd_wa = 0,
        .use_mmio_flip = 0,
        .mmio_debug = 0,
+       .verbose_state_checks = 1,
 };
 
 module_param_named(modeset, i915.modeset, int, 0400);
@@ -173,3 +174,7 @@ module_param_named(mmio_debug, i915.mmio_debug, bool, 0600);
 MODULE_PARM_DESC(mmio_debug,
        "Enable the MMIO debug code (default: false). This may negatively "
        "affect performance.");
+
+module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
+MODULE_PARM_DESC(verbose_state_checks,
+       "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
index 878c4857ff4923b8a8e71dd5e91a3b380bc6fe2c..0a09473e1eee8ebc0992d7a1ab2170a86fd6fe65 100644 (file)
@@ -1024,7 +1024,7 @@ void assert_pll(struct drm_i915_private *dev_priv,
        reg = DPLL(pipe);
        val = I915_READ(reg);
        cur_state = !!(val & DPLL_VCO_ENABLE);
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "PLL state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
 }
@@ -1040,7 +1040,7 @@ static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
        mutex_unlock(&dev_priv->dpio_lock);
 
        cur_state = val & DSI_PLL_VCO_EN;
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "DSI PLL state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
 }
@@ -1071,7 +1071,7 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
                return;
 
        cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "%s assertion failure (expected %s, current %s)\n",
             pll->name, state_string(state), state_string(cur_state));
 }
@@ -1095,7 +1095,7 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
                val = I915_READ(reg);
                cur_state = !!(val & FDI_TX_ENABLE);
        }
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "FDI TX state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
 }
@@ -1112,7 +1112,7 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
        reg = FDI_RX_CTL(pipe);
        val = I915_READ(reg);
        cur_state = !!(val & FDI_RX_ENABLE);
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "FDI RX state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
 }
@@ -1135,7 +1135,7 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 
        reg = FDI_TX_CTL(pipe);
        val = I915_READ(reg);
-       WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+       I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
 }
 
 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
@@ -1148,7 +1148,7 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
        reg = FDI_RX_CTL(pipe);
        val = I915_READ(reg);
        cur_state = !!(val & FDI_RX_PLL_ENABLE);
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "FDI RX PLL assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
 }
@@ -1190,7 +1190,7 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
            ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
                locked = false;
 
-       WARN(panel_pipe == pipe && locked,
+       I915_STATE_WARN(panel_pipe == pipe && locked,
             "panel assertion failure, pipe %c regs locked\n",
             pipe_name(pipe));
 }
@@ -1206,7 +1206,7 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
        else
                cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
 
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "cursor on pipe %c assertion failure (expected %s, current %s)\n",
             pipe_name(pipe), state_string(state), state_string(cur_state));
 }
@@ -1236,7 +1236,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
                cur_state = !!(val & PIPECONF_ENABLE);
        }
 
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "pipe %c assertion failure (expected %s, current %s)\n",
             pipe_name(pipe), state_string(state), state_string(cur_state));
 }
@@ -1251,7 +1251,7 @@ static void assert_plane(struct drm_i915_private *dev_priv,
        reg = DSPCNTR(plane);
        val = I915_READ(reg);
        cur_state = !!(val & DISPLAY_PLANE_ENABLE);
-       WARN(cur_state != state,
+       I915_STATE_WARN(cur_state != state,
             "plane %c assertion failure (expected %s, current %s)\n",
             plane_name(plane), state_string(state), state_string(cur_state));
 }
@@ -1271,7 +1271,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
        if (INTEL_INFO(dev)->gen >= 4) {
                reg = DSPCNTR(pipe);
                val = I915_READ(reg);
-               WARN(val & DISPLAY_PLANE_ENABLE,
+               I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
                     "plane %c assertion failure, should be disabled but not\n",
                     plane_name(pipe));
                return;
@@ -1283,7 +1283,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
                val = I915_READ(reg);
                cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
                        DISPPLANE_SEL_PIPE_SHIFT;
-               WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
+               I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
                     "plane %c assertion failure, should be off on pipe %c but is still active\n",
                     plane_name(i), pipe_name(pipe));
        }
@@ -1299,7 +1299,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
        if (INTEL_INFO(dev)->gen >= 9) {
                for_each_sprite(pipe, sprite) {
                        val = I915_READ(PLANE_CTL(pipe, sprite));
-                       WARN(val & PLANE_CTL_ENABLE,
+                       I915_STATE_WARN(val & PLANE_CTL_ENABLE,
                             "plane %d assertion failure, should be off on pipe %c but is still active\n",
                             sprite, pipe_name(pipe));
                }
@@ -1307,20 +1307,20 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
                for_each_sprite(pipe, sprite) {
                        reg = SPCNTR(pipe, sprite);
                        val = I915_READ(reg);
-                       WARN(val & SP_ENABLE,
+                       I915_STATE_WARN(val & SP_ENABLE,
                             "sprite %c assertion failure, should be off on pipe %c but is still active\n",
                             sprite_name(pipe, sprite), pipe_name(pipe));
                }
        } else if (INTEL_INFO(dev)->gen >= 7) {
                reg = SPRCTL(pipe);
                val = I915_READ(reg);
-               WARN(val & SPRITE_ENABLE,
+               I915_STATE_WARN(val & SPRITE_ENABLE,
                     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
                     plane_name(pipe), pipe_name(pipe));
        } else if (INTEL_INFO(dev)->gen >= 5) {
                reg = DVSCNTR(pipe);
                val = I915_READ(reg);
-               WARN(val & DVS_ENABLE,
+               I915_STATE_WARN(val & DVS_ENABLE,
                     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
                     plane_name(pipe), pipe_name(pipe));
        }
@@ -1328,7 +1328,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
 
 static void assert_vblank_disabled(struct drm_crtc *crtc)
 {
-       if (WARN_ON(drm_crtc_vblank_get(crtc) == 0))
+       if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
                drm_crtc_vblank_put(crtc);
 }
 
@@ -1337,12 +1337,12 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
        u32 val;
        bool enabled;
 
-       WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
+       I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
 
        val = I915_READ(PCH_DREF_CONTROL);
        enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
                            DREF_SUPERSPREAD_SOURCE_MASK));
-       WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
+       I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
 }
 
 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
@@ -1355,7 +1355,7 @@ static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
        reg = PCH_TRANSCONF(pipe);
        val = I915_READ(reg);
        enabled = !!(val & TRANS_ENABLE);
-       WARN(enabled,
+       I915_STATE_WARN(enabled,
             "transcoder assertion failed, should be off on pipe %c but is still active\n",
             pipe_name(pipe));
 }
@@ -1435,11 +1435,11 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
                                   enum pipe pipe, int reg, u32 port_sel)
 {
        u32 val = I915_READ(reg);
-       WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
+       I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
             "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
             reg, pipe_name(pipe));
 
-       WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+       I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
             && (val & DP_PIPEB_SELECT),
             "IBX PCH dp port still using transcoder B\n");
 }
@@ -1448,11 +1448,11 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
                                     enum pipe pipe, int reg)
 {
        u32 val = I915_READ(reg);
-       WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
+       I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
             "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
             reg, pipe_name(pipe));
 
-       WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
+       I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
             && (val & SDVO_PIPE_B_SELECT),
             "IBX PCH hdmi port still using transcoder B\n");
 }
@@ -1469,13 +1469,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
 
        reg = PCH_ADPA;
        val = I915_READ(reg);
-       WARN(adpa_pipe_enabled(dev_priv, pipe, val),
+       I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
             "PCH VGA enabled on transcoder %c, should be disabled\n",
             pipe_name(pipe));
 
        reg = PCH_LVDS;
        val = I915_READ(reg);
-       WARN(lvds_pipe_enabled(dev_priv, pipe, val),
+       I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
             "PCH LVDS enabled on transcoder %c, should be disabled\n",
             pipe_name(pipe));
 
@@ -5311,25 +5311,25 @@ static void intel_connector_check_state(struct intel_connector *connector)
                if (connector->mst_port)
                        return;
 
-               WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
+               I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
                     "wrong connector dpms state\n");
-               WARN(connector->base.encoder != &encoder->base,
+               I915_STATE_WARN(connector->base.encoder != &encoder->base,
                     "active connector not linked to encoder\n");
 
                if (encoder) {
-                       WARN(!encoder->connectors_active,
+                       I915_STATE_WARN(!encoder->connectors_active,
                             "encoder->connectors_active not set\n");
 
                        encoder_enabled = encoder->get_hw_state(encoder, &pipe);
-                       WARN(!encoder_enabled, "encoder not enabled\n");
-                       if (WARN_ON(!encoder->base.crtc))
+                       I915_STATE_WARN(!encoder_enabled, "encoder not enabled\n");
+                       if (I915_STATE_WARN_ON(!encoder->base.crtc))
                                return;
 
                        crtc = encoder->base.crtc;
 
-                       WARN(!crtc->enabled, "crtc not enabled\n");
-                       WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
-                       WARN(pipe != to_intel_crtc(crtc)->pipe,
+                       I915_STATE_WARN(!crtc->enabled, "crtc not enabled\n");
+                       I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
+                       I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
                             "encoder active on the wrong pipe\n");
                }
        }
@@ -7739,24 +7739,24 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
        struct intel_crtc *crtc;
 
        for_each_intel_crtc(dev, crtc)
-               WARN(crtc->active, "CRTC for pipe %c enabled\n",
+               I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
                     pipe_name(crtc->pipe));
 
-       WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
-       WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
-       WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
-       WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
-       WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
-       WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
+       I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
+       I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
+       I915_STATE_WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
+       I915_STATE_WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
+       I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
+       I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
             "CPU PWM1 enabled\n");
        if (IS_HASWELL(dev))
-               WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
+               I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
                     "CPU PWM2 enabled\n");
-       WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
+       I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
             "PCH PWM1 enabled\n");
-       WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+       I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
             "Utility pin enabled\n");
-       WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
+       I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
 
        /*
         * In theory we can still leave IRQs enabled, as long as only the HPD
@@ -7764,7 +7764,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
         * gen-specific and since we only disable LCPLL after we fully disable
         * the interrupts, the check below should be enough.
         */
-       WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
+       I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
 }
 
 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
@@ -10640,7 +10640,7 @@ check_connector_state(struct drm_device *dev)
                 * ->get_hw_state callbacks. */
                intel_connector_check_state(connector);
 
-               WARN(&connector->new_encoder->base != connector->base.encoder,
+               I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
                     "connector's staged encoder doesn't match current encoder\n");
        }
 }
@@ -10660,9 +10660,9 @@ check_encoder_state(struct drm_device *dev)
                              encoder->base.base.id,
                              encoder->base.name);
 
-               WARN(&encoder->new_crtc->base != encoder->base.crtc,
+               I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
                     "encoder's stage crtc doesn't match current crtc\n");
-               WARN(encoder->connectors_active && !encoder->base.crtc,
+               I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
                     "encoder's active_connectors set, but no crtc\n");
 
                list_for_each_entry(connector, &dev->mode_config.connector_list,
@@ -10681,19 +10681,19 @@ check_encoder_state(struct drm_device *dev)
                if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
                        continue;
 
-               WARN(!!encoder->base.crtc != enabled,
+               I915_STATE_WARN(!!encoder->base.crtc != enabled,
                     "encoder's enabled state mismatch "
                     "(expected %i, found %i)\n",
                     !!encoder->base.crtc, enabled);
-               WARN(active && !encoder->base.crtc,
+               I915_STATE_WARN(active && !encoder->base.crtc,
                     "active encoder with no crtc\n");
 
-               WARN(encoder->connectors_active != active,
+               I915_STATE_WARN(encoder->connectors_active != active,
                     "encoder's computed active state doesn't match tracked active state "
                     "(expected %i, found %i)\n", active, encoder->connectors_active);
 
                active = encoder->get_hw_state(encoder, &pipe);
-               WARN(active != encoder->connectors_active,
+               I915_STATE_WARN(active != encoder->connectors_active,
                     "encoder's hw state doesn't match sw tracking "
                     "(expected %i, found %i)\n",
                     encoder->connectors_active, active);
@@ -10702,7 +10702,7 @@ check_encoder_state(struct drm_device *dev)
                        continue;
 
                tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
-               WARN(active && pipe != tracked_pipe,
+               I915_STATE_WARN(active && pipe != tracked_pipe,
                     "active encoder's pipe doesn't match"
                     "(expected %i, found %i)\n",
                     tracked_pipe, pipe);
@@ -10727,7 +10727,7 @@ check_crtc_state(struct drm_device *dev)
                DRM_DEBUG_KMS("[CRTC:%d]\n",
                              crtc->base.base.id);
 
-               WARN(crtc->active && !crtc->base.enabled,
+               I915_STATE_WARN(crtc->active && !crtc->base.enabled,
                     "active crtc, but not enabled in sw tracking\n");
 
                for_each_intel_encoder(dev, encoder) {
@@ -10738,10 +10738,10 @@ check_crtc_state(struct drm_device *dev)
                                active = true;
                }
 
-               WARN(active != crtc->active,
+               I915_STATE_WARN(active != crtc->active,
                     "crtc's computed active state doesn't match tracked active state "
                     "(expected %i, found %i)\n", active, crtc->active);
-               WARN(enabled != crtc->base.enabled,
+               I915_STATE_WARN(enabled != crtc->base.enabled,
                     "crtc's computed enabled state doesn't match tracked enabled state "
                     "(expected %i, found %i)\n", enabled, crtc->base.enabled);
 
@@ -10761,13 +10761,13 @@ check_crtc_state(struct drm_device *dev)
                                encoder->get_config(encoder, &pipe_config);
                }
 
-               WARN(crtc->active != active,
+               I915_STATE_WARN(crtc->active != active,
                     "crtc active state doesn't match with hw state "
                     "(expected %i, found %i)\n", crtc->active, active);
 
                if (active &&
                    !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
-                       WARN(1, "pipe state doesn't match!\n");
+                       I915_STATE_WARN(1, "pipe state doesn't match!\n");
                        intel_dump_pipe_config(crtc, &pipe_config,
                                               "[hw state]");
                        intel_dump_pipe_config(crtc, &crtc->config,
@@ -10795,14 +10795,14 @@ check_shared_dpll_state(struct drm_device *dev)
 
                active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
 
-               WARN(pll->active > hweight32(pll->config.crtc_mask),
+               I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
                     "more active pll users than references: %i vs %i\n",
                     pll->active, hweight32(pll->config.crtc_mask));
-               WARN(pll->active && !pll->on,
+               I915_STATE_WARN(pll->active && !pll->on,
                     "pll in active use but not on in sw tracking\n");
-               WARN(pll->on && !pll->active,
+               I915_STATE_WARN(pll->on && !pll->active,
                     "pll in on but not on in use in sw tracking\n");
-               WARN(pll->on != active,
+               I915_STATE_WARN(pll->on != active,
                     "pll on state mismatch (expected %i, found %i)\n",
                     pll->on, active);
 
@@ -10812,14 +10812,14 @@ check_shared_dpll_state(struct drm_device *dev)
                        if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
                                active_crtcs++;
                }
-               WARN(pll->active != active_crtcs,
+               I915_STATE_WARN(pll->active != active_crtcs,
                     "pll active crtcs mismatch (expected %i, found %i)\n",
                     pll->active, active_crtcs);
-               WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
+               I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
                     "pll enabled crtcs mismatch (expected %i, found %i)\n",
                     hweight32(pll->config.crtc_mask), enabled_crtcs);
 
-               WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
+               I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
                                       sizeof(dpll_hw_state)),
                     "pll hw state mismatch\n");
        }
index 8b31e01b054b74e426ca6a4b1338cfa89eabb8f5..88d81a8b0d3580c089bcd645e26f2da55a43abb0 100644 (file)
@@ -1558,7 +1558,7 @@ void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
        vdd = edp_panel_vdd_on(intel_dp);
        pps_unlock(intel_dp);
 
-       WARN(!vdd, "eDP port %c VDD already requested on\n",
+       I915_STATE_WARN(!vdd, "eDP port %c VDD already requested on\n",
             port_name(dp_to_dig_port(intel_dp)->port));
 }
 
@@ -1642,7 +1642,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
        if (!is_edp(intel_dp))
                return;
 
-       WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
+       I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
             port_name(dp_to_dig_port(intel_dp)->port));
 
        intel_dp->want_panel_vdd = false;
index 8a2bd1869fd807eb43d4eb5cccfb47dff6fee1ea..6aa3a81df485669d00514961e73f432e8fffd6fb 100644 (file)
@@ -633,7 +633,7 @@ static void check_power_well_state(struct drm_i915_private *dev_priv,
        return;
 
 mismatch:
-       WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
+       I915_STATE_WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
                  power_well->name, power_well->always_on, enabled,
                  power_well->count, i915.disable_power_well);
 }