ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
authorNishanth Menon <nm@ti.com>
Fri, 23 May 2014 05:04:02 +0000 (00:04 -0500)
committerNishanth Menon <nm@ti.com>
Tue, 9 Sep 2014 13:33:03 +0000 (08:33 -0500)
We've had deeper idle states working on omaps for few years now,
but only in the legacy mode. When booted with device tree, the
wake-up events did not have a chance to work until commit
3e6cee1786a1 ("pinctrl: single: Add support for wake-up interrupts")
that recently got merged. In addition to that we also needed
commit 79d9701559a9 ("of/irq: create interrupts-extended property")
that's now also merged.

Note that there's no longer need to specify the wake-up bit in
the pinctrl settings, the request_irq on the wake-up pin takes
care of that.

Signed-off-by: Nishanth Menon <nm@ti.com>
arch/arm/boot/dts/dra7.dtsi
arch/arm/boot/dts/omap5.dtsi

index f8654a8b6aa27be2b2be788ed69df0799694c776..4e50deaa0fb6f9511306dd5787c332e1ad83116d 100644 (file)
                uart1: serial@4806a000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4806a000 0x100>;
-                       interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart1";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart2: serial@4806c000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4806c000 0x100>;
-                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart2";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart3: serial@48020000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48020000 0x100>;
-                       interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart3";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart4: serial@4806e000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4806e000 0x100>;
-                       interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart4";
                        clock-frequency = <48000000>;
                         status = "disabled";
                uart5: serial@48066000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48066000 0x100>;
-                       interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart5";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart6: serial@48068000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48068000 0x100>;
-                       interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart6";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart7: serial@48420000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48420000 0x100>;
-                       interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart7";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart8: serial@48422000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48422000 0x100>;
-                       interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart8";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart9: serial@48424000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48424000 0x100>;
-                       interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart9";
                        clock-frequency = <48000000>;
                        status = "disabled";
                uart10: serial@4ae2b000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4ae2b000 0x100>;
-                       interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart10";
                        clock-frequency = <48000000>;
                        status = "disabled";
index ea08ad874f82a5549ca3a06acb60ab65366dd7b8..b840db0d16d14244a289caae124f9efe55df504d 100644 (file)
                uart1: serial@4806a000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4806a000 0x100>;
-                       interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart1";
                        clock-frequency = <48000000>;
                };
                uart2: serial@4806c000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4806c000 0x100>;
-                       interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart2";
                        clock-frequency = <48000000>;
                };
                uart3: serial@48020000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48020000 0x100>;
-                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart3";
                        clock-frequency = <48000000>;
                };
                uart4: serial@4806e000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x4806e000 0x100>;
-                       interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart4";
                        clock-frequency = <48000000>;
                };
                uart5: serial@48066000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48066000 0x100>;
-                       interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart5";
                        clock-frequency = <48000000>;
                };
                uart6: serial@48068000 {
                        compatible = "ti,omap4-uart";
                        reg = <0x48068000 0x100>;
-                       interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "uart6";
                        clock-frequency = <48000000>;
                };