regulator: AXP20x: Add support for regulators subsystem
authorCarlo Caione <carlo@caione.org>
Fri, 11 Apr 2014 09:38:10 +0000 (11:38 +0200)
committerMark Brown <broonie@linaro.org>
Mon, 14 Apr 2014 16:00:34 +0000 (17:00 +0100)
AXP202 and AXP209 come with two synchronous step-down DC-DCs and five
LDOs. This patch introduces basic support for those regulators.

Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/axp20x-regulator.c [new file with mode: 0644]

index 903eb37f047a916d510685b7e203a4ecdb680cbd..65e5d7d1b35a49708d121f6caa732e2d6141f1ca 100644 (file)
@@ -139,6 +139,13 @@ config REGULATOR_AS3722
          AS3722 PMIC. This will enable support for all the software
          controllable DCDC/LDO regulators.
 
+config REGULATOR_AXP20X
+       tristate "X-POWERS AXP20X PMIC Regulators"
+       depends on MFD_AXP20X
+       help
+         This driver provides support for the voltage regulators on the
+         AXP20X PMIC.
+
 config REGULATOR_BCM590XX
        tristate "Broadcom BCM590xx PMU Regulators"
        depends on MFD_BCM590XX
index 12ef277a48b47c55bdceee69f8f637bc929522f8..c14696b290c0ccfd452e19eaabce47238c8bfce5 100644 (file)
@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
 obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
 obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
new file mode 100644 (file)
index 0000000..78a29e6
--- /dev/null
@@ -0,0 +1,285 @@
+/*
+ * AXP20x regulators driver.
+ *
+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define AXP20X_IO_ENABLED              0x03
+#define AXP20X_IO_DISABLED             0x07
+
+#define AXP20X_WORKMODE_DCDC2_MASK     BIT(2)
+#define AXP20X_WORKMODE_DCDC3_MASK     BIT(1)
+
+#define AXP20X_FREQ_DCDC_MASK          0x0f
+
+#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg,   \
+                      _emask, _enable_val, _disable_val)                       \
+       [AXP20X_##_id] = {                                                      \
+               .name           = #_id,                                         \
+               .supply_name    = (_supply),                                    \
+               .type           = REGULATOR_VOLTAGE,                            \
+               .id             = AXP20X_##_id,                                 \
+               .n_voltages     = (((_max) - (_min)) / (_step) + 1),            \
+               .owner          = THIS_MODULE,                                  \
+               .min_uV         = (_min) * 1000,                                \
+               .uV_step        = (_step) * 1000,                               \
+               .vsel_reg       = (_vreg),                                      \
+               .vsel_mask      = (_vmask),                                     \
+               .enable_reg     = (_ereg),                                      \
+               .enable_mask    = (_emask),                                     \
+               .enable_val     = (_enable_val),                                \
+               .disable_val    = (_disable_val),                               \
+               .ops            = &axp20x_ops,                                  \
+       }
+
+#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg,     \
+                   _emask)                                                     \
+       [AXP20X_##_id] = {                                                      \
+               .name           = #_id,                                         \
+               .supply_name    = (_supply),                                    \
+               .type           = REGULATOR_VOLTAGE,                            \
+               .id             = AXP20X_##_id,                                 \
+               .n_voltages     = (((_max) - (_min)) / (_step) + 1),            \
+               .owner          = THIS_MODULE,                                  \
+               .min_uV         = (_min) * 1000,                                \
+               .uV_step        = (_step) * 1000,                               \
+               .vsel_reg       = (_vreg),                                      \
+               .vsel_mask      = (_vmask),                                     \
+               .enable_reg     = (_ereg),                                      \
+               .enable_mask    = (_emask),                                     \
+               .ops            = &axp20x_ops,                                  \
+       }
+
+#define AXP20X_DESC_FIXED(_id, _supply, _volt)                                 \
+       [AXP20X_##_id] = {                                                      \
+               .name           = #_id,                                         \
+               .supply_name    = (_supply),                                    \
+               .type           = REGULATOR_VOLTAGE,                            \
+               .id             = AXP20X_##_id,                                 \
+               .n_voltages     = 1,                                            \
+               .owner          = THIS_MODULE,                                  \
+               .min_uV         = (_volt) * 1000,                               \
+               .ops            = &axp20x_ops_fixed                             \
+       }
+
+#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask)  \
+       [AXP20X_##_id] = {                                                      \
+               .name           = #_id,                                         \
+               .supply_name    = (_supply),                                    \
+               .type           = REGULATOR_VOLTAGE,                            \
+               .id             = AXP20X_##_id,                                 \
+               .n_voltages     = ARRAY_SIZE(_table),                           \
+               .owner          = THIS_MODULE,                                  \
+               .vsel_reg       = (_vreg),                                      \
+               .vsel_mask      = (_vmask),                                     \
+               .enable_reg     = (_ereg),                                      \
+               .enable_mask    = (_emask),                                     \
+               .volt_table     = (_table),                                     \
+               .ops            = &axp20x_ops_table,                            \
+       }
+
+static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000,
+                                       1700000, 1800000, 1900000, 2000000, 2500000,
+                                       2700000, 2800000, 3000000, 3100000, 3200000,
+                                       3300000 };
+
+static struct regulator_ops axp20x_ops_fixed = {
+       .list_voltage           = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops axp20x_ops_table = {
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .list_voltage           = regulator_list_voltage_table,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops axp20x_ops = {
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .list_voltage           = regulator_list_voltage_linear,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_desc axp20x_regulators[] = {
+       AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
+                   AXP20X_PWR_OUT_CTRL, 0x10),
+       AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
+                   AXP20X_PWR_OUT_CTRL, 0x02),
+       AXP20X_DESC_FIXED(LDO1, "acin", 1300),
+       AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
+                   AXP20X_PWR_OUT_CTRL, 0x04),
+       AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
+                   AXP20X_PWR_OUT_CTRL, 0x40),
+       AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
+                         AXP20X_PWR_OUT_CTRL, 0x08),
+       AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
+                      AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
+                      AXP20X_IO_DISABLED),
+};
+
+#define AXP_MATCH(_name, _id) \
+       [AXP20X_##_id] = { \
+               .name           = #_name, \
+               .driver_data    = (void *) &axp20x_regulators[AXP20X_##_id], \
+       }
+
+static struct of_regulator_match axp20x_matches[] = {
+       AXP_MATCH(dcdc2, DCDC2),
+       AXP_MATCH(dcdc3, DCDC3),
+       AXP_MATCH(ldo1, LDO1),
+       AXP_MATCH(ldo2, LDO2),
+       AXP_MATCH(ldo3, LDO3),
+       AXP_MATCH(ldo4, LDO4),
+       AXP_MATCH(ldo5, LDO5),
+};
+
+static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
+{
+       struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+       if (dcdcfreq < 750) {
+               dcdcfreq = 750;
+               dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n");
+       }
+
+       if (dcdcfreq > 1875) {
+               dcdcfreq = 1875;
+               dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n");
+       }
+
+       dcdcfreq = (dcdcfreq - 750) / 75;
+
+       return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
+                                 AXP20X_FREQ_DCDC_MASK, dcdcfreq);
+}
+
+static int axp20x_regulator_parse_dt(struct platform_device *pdev)
+{
+       struct device_node *np, *regulators;
+       int ret;
+       u32 dcdcfreq;
+
+       np = of_node_get(pdev->dev.parent->of_node);
+       if (!np)
+               return 0;
+
+       regulators = of_find_node_by_name(np, "regulators");
+       if (!regulators) {
+               dev_warn(&pdev->dev, "regulators node not found\n");
+       } else {
+               ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
+                                        ARRAY_SIZE(axp20x_matches));
+               if (ret < 0) {
+                       dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
+                       return ret;
+               }
+
+               dcdcfreq = 1500;
+               of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
+               ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
+               if (ret < 0) {
+                       dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
+                       return ret;
+               }
+
+               of_node_put(regulators);
+       }
+
+       return 0;
+}
+
+static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
+{
+       unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
+
+       if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
+               return -EINVAL;
+
+       if (id == AXP20X_DCDC3)
+               mask = AXP20X_WORKMODE_DCDC3_MASK;
+
+       workmode <<= ffs(mask) - 1;
+
+       return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
+}
+
+static int axp20x_regulator_probe(struct platform_device *pdev)
+{
+       struct regulator_dev *rdev;
+       struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+       struct regulator_config config = { };
+       struct regulator_init_data *init_data;
+       int ret, i;
+       u32 workmode;
+
+       ret = axp20x_regulator_parse_dt(pdev);
+       if (ret)
+               return ret;
+
+       for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
+               init_data = axp20x_matches[i].init_data;
+
+               config.dev = &pdev->dev;
+               config.init_data = init_data;
+               config.regmap = axp20x->regmap;
+               config.of_node = axp20x_matches[i].of_node;
+
+               rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
+                                              &config);
+               if (IS_ERR(rdev)) {
+                       dev_err(&pdev->dev, "Failed to register %s\n",
+                               axp20x_regulators[i].name);
+
+                       return PTR_ERR(rdev);
+               }
+
+               ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode",
+                                          &workmode);
+               if (!ret) {
+                       if (axp20x_set_dcdc_workmode(rdev, i, workmode))
+                               dev_err(&pdev->dev, "Failed to set workmode on %s\n",
+                                       axp20x_regulators[i].name);
+               }
+       }
+
+       return 0;
+}
+
+static struct platform_driver axp20x_regulator_driver = {
+       .probe  = axp20x_regulator_probe,
+       .driver = {
+               .name           = "axp20x-regulator",
+               .owner          = THIS_MODULE,
+       },
+};
+
+module_platform_driver(axp20x_regulator_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");