Input: i8042 - get rid of polling timer
authorDmitry Torokhov <dtor@insightbb.com>
Mon, 11 Sep 2006 01:57:21 +0000 (21:57 -0400)
committerDmitry Torokhov <dtor@insightbb.com>
Mon, 11 Sep 2006 01:57:21 +0000 (21:57 -0400)
Remove polling timer that was used to detect keybord/mice hotplug and
register both IRQs right away instead of waiting for a driver to
attach to a port.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
drivers/input/serio/i8042.c
drivers/input/serio/i8042.h

index 06a3f25657dd29062455027e076cbab0c99165b5..1bb0c76a9259b182c2153a86472965712b134c6d 100644 (file)
@@ -90,46 +90,24 @@ static DEFINE_SPINLOCK(i8042_lock);
 struct i8042_port {
        struct serio *serio;
        int irq;
-       unsigned char disable;
-       unsigned char irqen;
        unsigned char exists;
        signed char mux;
-       char name[8];
 };
 
 #define I8042_KBD_PORT_NO      0
 #define I8042_AUX_PORT_NO      1
 #define I8042_MUX_PORT_NO      2
 #define I8042_NUM_PORTS                (I8042_NUM_MUX_PORTS + 2)
-static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
-       {
-               .disable        = I8042_CTR_KBDDIS,
-               .irqen          = I8042_CTR_KBDINT,
-               .mux            = -1,
-               .name           = "KBD",
-       },
-       {
-               .disable        = I8042_CTR_AUXDIS,
-               .irqen          = I8042_CTR_AUXINT,
-               .mux            = -1,
-               .name           = "AUX",
-       }
-};
+
+static struct i8042_port i8042_ports[I8042_NUM_PORTS];
 
 static unsigned char i8042_initial_ctr;
 static unsigned char i8042_ctr;
-static unsigned char i8042_mux_open;
 static unsigned char i8042_mux_present;
-static struct timer_list i8042_timer;
+static unsigned char i8042_kbd_irq_registered;
+static unsigned char i8042_aux_irq_registered;
 static struct platform_device *i8042_platform_device;
 
-
-/*
- * Shared IRQ's require a device pointer, but this driver doesn't support
- * multiple devices
- */
-#define i8042_request_irq_cookie (&i8042_timer)
-
 static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
 /*
@@ -141,6 +119,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 static int i8042_wait_read(void)
 {
        int i = 0;
+
        while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
                udelay(50);
                i++;
@@ -151,6 +130,7 @@ static int i8042_wait_read(void)
 static int i8042_wait_write(void)
 {
        int i = 0;
+
        while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
                udelay(50);
                i++;
@@ -192,48 +172,57 @@ static int i8042_flush(void)
  * encoded in bits 8-11 of the command number.
  */
 
-static int i8042_command(unsigned char *param, int command)
+static int __i8042_command(unsigned char *param, int command)
 {
-       unsigned long flags;
-       int i, retval, auxerr = 0;
+       int i, error;
 
        if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
                return -1;
 
-       spin_lock_irqsave(&i8042_lock, flags);
-
-       if ((retval = i8042_wait_write()))
-               goto out;
+       error = i8042_wait_write();
+       if (error)
+               return error;
 
        dbg("%02x -> i8042 (command)", command & 0xff);
        i8042_write_command(command & 0xff);
 
        for (i = 0; i < ((command >> 12) & 0xf); i++) {
-               if ((retval = i8042_wait_write()))
-                       goto out;
+               error = i8042_wait_write();
+               if (error)
+                       return error;
                dbg("%02x -> i8042 (parameter)", param[i]);
                i8042_write_data(param[i]);
        }
 
        for (i = 0; i < ((command >> 8) & 0xf); i++) {
-               if ((retval = i8042_wait_read()))
-                       goto out;
+               error = i8042_wait_read();
+               if (error) {
+                       dbg("     -- i8042 (timeout)");
+                       return error;
+               }
 
                if (command == I8042_CMD_AUX_LOOP &&
                    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-                       retval = auxerr = -1;
-                       goto out;
+                       dbg("     -- i8042 (auxerr)");
+                       return -1;
                }
 
                param[i] = i8042_read_data();
                dbg("%02x <- i8042 (return)", param[i]);
        }
 
-       if (retval)
-               dbg("     -- i8042 (%s)", auxerr ? "auxerr" : "timeout");
+       return 0;
+}
 
- out:
+static int i8042_command(unsigned char *param, int command)
+{
+       unsigned long flags;
+       int retval;
+
+       spin_lock_irqsave(&i8042_lock, flags);
+       retval = __i8042_command(param, command);
        spin_unlock_irqrestore(&i8042_lock, flags);
+
        return retval;
 }
 
@@ -248,7 +237,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 
        spin_lock_irqsave(&i8042_lock, flags);
 
-       if(!(retval = i8042_wait_write())) {
+       if (!(retval = i8042_wait_write())) {
                dbg("%02x -> i8042 (kbd-data)", c);
                i8042_write_data(c);
        }
@@ -286,100 +275,6 @@ static int i8042_aux_write(struct serio *serio, unsigned char c)
        return retval;
 }
 
-/*
- * i8042_activate_port() enables port on a chip.
- */
-
-static int i8042_activate_port(struct i8042_port *port)
-{
-       if (!port->serio)
-               return -1;
-
-       i8042_flush();
-
-       /*
-        * Enable port again here because it is disabled if we are
-        * resuming (normally it is enabled already).
-        */
-       i8042_ctr &= ~port->disable;
-
-       i8042_ctr |= port->irqen;
-
-       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-               i8042_ctr &= ~port->irqen;
-               return -1;
-       }
-
-       return 0;
-}
-
-
-/*
- * i8042_open() is called when a port is open by the higher layer.
- * It allocates the interrupt and calls i8042_enable_port.
- */
-
-static int i8042_open(struct serio *serio)
-{
-       struct i8042_port *port = serio->port_data;
-
-       if (port->mux != -1)
-               if (i8042_mux_open++)
-                       return 0;
-
-       if (request_irq(port->irq, i8042_interrupt,
-                       IRQF_SHARED, "i8042", i8042_request_irq_cookie)) {
-               printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", port->irq, port->name);
-               goto irq_fail;
-       }
-
-       if (i8042_activate_port(port)) {
-               printk(KERN_ERR "i8042.c: Can't activate %s, unregistering the port\n", port->name);
-               goto activate_fail;
-       }
-
-       i8042_interrupt(0, NULL, NULL);
-
-       return 0;
-
- activate_fail:
-       free_irq(port->irq, i8042_request_irq_cookie);
-
- irq_fail:
-       serio_unregister_port_delayed(serio);
-
-       return -1;
-}
-
-/*
- * i8042_close() frees the interrupt, so that it can possibly be used
- * by another driver. We never know - if the user doesn't have a mouse,
- * the BIOS could have used the AUX interrupt for PCI.
- */
-
-static void i8042_close(struct serio *serio)
-{
-       struct i8042_port *port = serio->port_data;
-
-       if (port->mux != -1)
-               if (--i8042_mux_open)
-                       return;
-
-       i8042_ctr &= ~port->irqen;
-
-       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-               printk(KERN_WARNING "i8042.c: Can't write CTR while closing %s.\n", port->name);
-/*
- * We still want to continue and free IRQ so if more data keeps coming in
- * kernel will just ignore the irq.
- */
-       }
-
-       free_irq(port->irq, i8042_request_irq_cookie);
-
-       i8042_flush();
-}
-
 /*
  * i8042_start() is called by serio core when port is about to finish
  * registering. It will mark port as existing so i8042_interrupt can
@@ -423,8 +318,6 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
        unsigned int port_no;
        int ret;
 
-       mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
-
        spin_lock_irqsave(&i8042_lock, flags);
        str = i8042_read_status();
        if (unlikely(~str & I8042_STR_OBF)) {
@@ -480,8 +373,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
        port = &i8042_ports[port_no];
 
-       dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
-           data, port->name, irq,
+       dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+           data, port_no, irq,
            dfl & SERIO_PARITY ? ", bad parity" : "",
            dfl & SERIO_TIMEOUT ? ", timeout" : "");
 
@@ -493,6 +386,58 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
        return IRQ_RETVAL(ret);
 }
 
+/*
+ * i8042_enable_kbd_port enables keybaord port on chip
+ */
+
+static int i8042_enable_kbd_port(void)
+{
+       i8042_ctr &= ~I8042_CTR_KBDDIS;
+       i8042_ctr |= I8042_CTR_KBDINT;
+
+       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+               printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+               return -EIO;
+       }
+
+       return 0;
+}
+
+/*
+ * i8042_enable_aux_port enables AUX (mouse) port on chip
+ */
+
+static int i8042_enable_aux_port(void)
+{
+       i8042_ctr &= ~I8042_CTR_AUXDIS;
+       i8042_ctr |= I8042_CTR_AUXINT;
+
+       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+               printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+               return -EIO;
+       }
+
+       return 0;
+}
+
+/*
+ * i8042_enable_mux_ports enables 4 individual AUX ports after
+ * the controller has been switched into Multiplexed mode
+ */
+
+static int i8042_enable_mux_ports(void)
+{
+       unsigned char param;
+       int i;
+
+       for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+               i8042_command(&param, I8042_CMD_MUX_PFX + i);
+               i8042_command(&param, I8042_CMD_AUX_ENABLE);
+       }
+
+       return i8042_enable_aux_port();
+}
+
 /*
  * i8042_set_mux_mode checks whether the controller has an active
  * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
@@ -510,8 +455,7 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
 
 /*
  * Internal loopback test - send three bytes, they should come back from the
- * mouse interface, the last should be version. Note that we negate mouseport
- * command responses for the i8042_check_aux() routine.
+ * mouse interface, the last should be version.
  */
 
        param = 0xf0;
@@ -530,67 +474,67 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
        return 0;
 }
 
-
 /*
- * i8042_enable_mux_ports enables 4 individual AUX ports after
- * the controller has been switched into Multiplexed mode
+ * i8042_check_mux() checks whether the controller supports the PS/2 Active
+ * Multiplexing specification by Synaptics, Phoenix, Insyde and
+ * LCS/Telegraphics.
  */
 
-static int i8042_enable_mux_ports(void)
+static int __devinit i8042_check_mux(void)
 {
-       unsigned char param;
-       int i;
+       unsigned char mux_version;
+
+       if (i8042_set_mux_mode(1, &mux_version))
+               return -1;
+
 /*
- * Disable all muxed ports by disabling AUX.
+ * Workaround for interference with USB Legacy emulation
+ * that causes a v10.12 MUX to be found.
  */
+       if (mux_version == 0xAC)
+               return -1;
+
+       printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+               (mux_version >> 4) & 0xf, mux_version & 0xf);
 
+/*
+ * Disable all muxed ports by disabling AUX.
+ */
        i8042_ctr |= I8042_CTR_AUXDIS;
        i8042_ctr &= ~I8042_CTR_AUXINT;
 
        if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
                printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
-               return -1;
+               return -EIO;
        }
 
-/*
- * Enable all muxed ports.
- */
-
-       for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
-               i8042_command(&param, I8042_CMD_MUX_PFX + i);
-               i8042_command(&param, I8042_CMD_AUX_ENABLE);
-       }
+       i8042_mux_present = 1;
 
        return 0;
 }
 
-
 /*
- * i8042_check_mux() checks whether the controller supports the PS/2 Active
- * Multiplexing specification by Synaptics, Phoenix, Insyde and
- * LCS/Telegraphics.
+ * The following is used to test AUX IRQ delivery.
  */
+static struct completion i8042_aux_irq_delivered __devinitdata;
+static int i8042_irq_being_tested __devinitdata;
 
-static int __devinit i8042_check_mux(void)
+static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
-       unsigned char mux_version;
-
-       if (i8042_set_mux_mode(1, &mux_version))
-               return -1;
-
-       /* Workaround for interference with USB Legacy emulation */
-       /* that causes a v10.12 MUX to be found. */
-       if (mux_version == 0xAC)
-               return -1;
-
-       printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
-               (mux_version >> 4) & 0xf, mux_version & 0xf);
+       unsigned long flags;
+       unsigned char str, data;
 
-       if (i8042_enable_mux_ports())
-               return -1;
+       spin_lock_irqsave(&i8042_lock, flags);
+       str = i8042_read_status();
+       if (str & I8042_STR_OBF) {
+               data = i8042_read_data();
+               if (i8042_irq_being_tested &&
+                   data == 0xa5 && (str & I8042_STR_AUXDATA))
+                       complete(&i8042_aux_irq_delivered);
+       }
+       spin_unlock_irqrestore(&i8042_lock, flags);
 
-       i8042_mux_present = 1;
-       return 0;
+       return IRQ_HANDLED;
 }
 
 
@@ -601,18 +545,10 @@ static int __devinit i8042_check_mux(void)
 
 static int __devinit i8042_check_aux(void)
 {
+       int retval = -1;
+       int irq_registered = 0;
+       unsigned long flags;
        unsigned char param;
-       static int i8042_check_aux_cookie;
-
-/*
- * Check if AUX irq is available. If it isn't, then there is no point
- * in trying to detect AUX presence.
- */
-
-       if (request_irq(i8042_ports[I8042_AUX_PORT_NO].irq, i8042_interrupt,
-                       IRQF_SHARED, "i8042", &i8042_check_aux_cookie))
-                return -1;
-       free_irq(i8042_ports[I8042_AUX_PORT_NO].irq, &i8042_check_aux_cookie);
 
 /*
  * Get rid of bytes in the queue.
@@ -637,9 +573,9 @@ static int __devinit i8042_check_aux(void)
  * AUX ports, we test for this only when the LOOP command failed.
  */
 
-               if (i8042_command(&param, I8042_CMD_AUX_TEST)
-                       || (param && param != 0xfa && param != 0xff))
-                               return -1;
+               if (i8042_command(&param, I8042_CMD_AUX_TEST) ||
+                   (param && param != 0xfa && param != 0xff))
+                       return -1;
        }
 
 /*
@@ -659,54 +595,80 @@ static int __devinit i8042_check_aux(void)
                return -1;
 
 /*
- * Disable the interface.
+ * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
+ * used it for a PCI card or somethig else.
  */
 
-       i8042_ctr |= I8042_CTR_AUXDIS;
-       i8042_ctr &= ~I8042_CTR_AUXINT;
+       if (i8042_noloop) {
+/*
+ * Without LOOP command we can't test AUX IRQ delivery. Assume the port
+ * is working and hope we are right.
+ */
+               retval = 0;
+               goto out;
+       }
 
-       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-               return -1;
+       if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED,
+                       "i8042", i8042_platform_device))
+               goto out;
 
-       return 0;
-}
+       irq_registered = 1;
+
+       if (i8042_enable_aux_port())
+               goto out;
+
+       spin_lock_irqsave(&i8042_lock, flags);
 
+       init_completion(&i8042_aux_irq_delivered);
+       i8042_irq_being_tested = 1;
+
+       param = 0xa5;
+       retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
+
+       spin_unlock_irqrestore(&i8042_lock, flags);
+
+       if (retval)
+               goto out;
 
+       if (wait_for_completion_timeout(&i8042_aux_irq_delivered,
+                                       msecs_to_jiffies(250)) == 0) {
 /*
- * i8042_port_register() marks the device as existing,
- * registers it, and reports to the user.
+ * AUX IRQ was never delivered so we need to flush the controller to
+ * get rid of the byte we put there; otherwise keyboard may not work.
  */
+               i8042_flush();
+               retval = -1;
+       }
 
-static int __devinit i8042_port_register(struct i8042_port *port)
-{
-       i8042_ctr &= ~port->disable;
+ out:
 
-       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-               printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
-               kfree(port->serio);
-               port->serio = NULL;
-               i8042_ctr |= port->disable;
-               return -EIO;
-       }
+/*
+ * Disable the interface.
+ */
 
-       printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n",
-              port->name,
-              (unsigned long) I8042_DATA_REG,
-              (unsigned long) I8042_COMMAND_REG,
-              port->irq);
+       i8042_ctr |= I8042_CTR_AUXDIS;
+       i8042_ctr &= ~I8042_CTR_AUXINT;
 
-       serio_register_port(port->serio);
+       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+               retval = -1;
 
-       return 0;
-}
+       if (irq_registered)
+               free_irq(I8042_AUX_IRQ, i8042_platform_device);
 
+       return retval;
+}
 
-static void i8042_timer_func(unsigned long data)
+static int i8042_controller_check(void)
 {
-       i8042_interrupt(0, NULL, NULL);
+       if (i8042_flush() == I8042_BUFFER_SIZE) {
+               printk(KERN_ERR "i8042.c: No controller found.\n");
+               return -ENODEV;
+       }
+
+       return 0;
 }
 
-static int i8042_ctl_test(void)
+static int i8042_controller_selftest(void)
 {
        unsigned char param;
 
@@ -715,13 +677,13 @@ static int i8042_ctl_test(void)
 
        if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
                printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-               return -1;
+               return -ENODEV;
        }
 
        if (param != I8042_RET_CTL_TEST) {
                printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
                         param, I8042_RET_CTL_TEST);
-               return -1;
+               return -EIO;
        }
 
        return 0;
@@ -737,26 +699,13 @@ static int i8042_controller_init(void)
 {
        unsigned long flags;
 
-/*
- * Test the i8042. We need to know if it thinks it's working correctly
- * before doing anything else.
- */
-
-       if (i8042_flush() == I8042_BUFFER_SIZE) {
-               printk(KERN_ERR "i8042.c: No controller found.\n");
-               return -1;
-       }
-
-       if (i8042_ctl_test())
-               return -1;
-
 /*
  * Save the CTR for restoral on unload / reboot.
  */
 
        if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
                printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
-               return -1;
+               return -EIO;
        }
 
        i8042_initial_ctr = i8042_ctr;
@@ -805,7 +754,7 @@ static int i8042_controller_init(void)
 
        if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
                printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
-               return -1;
+               return -EIO;
        }
 
        return 0;
@@ -813,15 +762,12 @@ static int i8042_controller_init(void)
 
 
 /*
- * Reset the controller.
+ * Reset the controller and reset CRT to the original value set by BIOS.
  */
+
 static void i8042_controller_reset(void)
 {
-/*
- * Reset the controller if requested.
- */
-
-       i8042_ctl_test();
+       i8042_flush();
 
 /*
  * Disable MUX mode if present.
@@ -831,12 +777,16 @@ static void i8042_controller_reset(void)
                i8042_set_mux_mode(0, NULL);
 
 /*
- * Restore the original control register setting.
+ * Reset the controller if requested.
  */
 
-       i8042_ctr = i8042_initial_ctr;
+       i8042_controller_selftest();
 
-       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+/*
+ * Restore the original control register setting.
+ */
+
+       if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
                printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
 }
 
@@ -850,14 +800,12 @@ static void i8042_controller_cleanup(void)
 {
        int i;
 
-       i8042_flush();
-
 /*
  * Reset anything that is connected to the ports.
  */
 
        for (i = 0; i < I8042_NUM_PORTS; i++)
-               if (i8042_ports[i].exists)
+               if (i8042_ports[i].serio)
                        serio_cleanup(i8042_ports[i].serio);
 
        i8042_controller_reset();
@@ -913,8 +861,7 @@ static long i8042_panic_blink(long count)
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-       del_timer_sync(&i8042_timer);
-       i8042_controller_reset();
+       i8042_controller_cleanup();
 
        return 0;
 }
@@ -926,33 +873,39 @@ static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 
 static int i8042_resume(struct platform_device *dev)
 {
-       int i;
+       int error;
 
-       if (i8042_ctl_test())
-               return -1;
+       error = i8042_controller_check();
+       if (error)
+               return error;
 
-       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-               printk(KERN_ERR "i8042: Can't write CTR\n");
-               return -1;
-       }
-
-       if (i8042_mux_present)
-               if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
-                       printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n");
+       error = i8042_controller_selftest();
+       if (error)
+               return error;
 
 /*
- * Activate all ports.
+ * Restore pre-resume CTR value and disable all ports
  */
 
-       for (i = 0; i < I8042_NUM_PORTS; i++)
-               i8042_activate_port(&i8042_ports[i]);
+       i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
+       i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
+       if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+               printk(KERN_ERR "i8042: Can't write CTR to resume\n");
+               return -EIO;
+       }
 
-/*
- * Restart timer (for polling "stuck" data)
- */
-       mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
+       if (i8042_mux_present) {
+               if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
+                       printk(KERN_WARNING
+                               "i8042: failed to resume active multiplexor, "
+                               "mouse won't work.\n");
+       } else if (i8042_ports[I8042_AUX_PORT_NO].serio)
+               i8042_enable_aux_port();
 
-       panic_blink = i8042_panic_blink;
+       if (i8042_ports[I8042_KBD_PORT_NO].serio)
+               i8042_enable_kbd_port();
+
+       i8042_interrupt(0, NULL, NULL);
 
        return 0;
 }
@@ -978,24 +931,24 @@ static int __devinit i8042_create_kbd_port(void)
 
        serio->id.type          = i8042_direct ? SERIO_8042 : SERIO_8042_XL;
        serio->write            = i8042_dumbkbd ? NULL : i8042_kbd_write;
-       serio->open             = i8042_open;
-       serio->close            = i8042_close;
        serio->start            = i8042_start;
        serio->stop             = i8042_stop;
        serio->port_data        = port;
        serio->dev.parent       = &i8042_platform_device->dev;
-       strlcpy(serio->name, "i8042 Kbd Port", sizeof(serio->name));
+       strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
        strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
 
        port->serio = serio;
+       port->irq = I8042_KBD_IRQ;
 
-       return i8042_port_register(port);
+       return 0;
 }
 
-static int __devinit i8042_create_aux_port(void)
+static int __devinit i8042_create_aux_port(int idx)
 {
        struct serio *serio;
-       struct i8042_port *port = &i8042_ports[I8042_AUX_PORT_NO];
+       int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
+       struct i8042_port *port = &i8042_ports[port_no];
 
        serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
        if (!serio)
@@ -1003,111 +956,191 @@ static int __devinit i8042_create_aux_port(void)
 
        serio->id.type          = SERIO_8042;
        serio->write            = i8042_aux_write;
-       serio->open             = i8042_open;
-       serio->close            = i8042_close;
        serio->start            = i8042_start;
        serio->stop             = i8042_stop;
        serio->port_data        = port;
        serio->dev.parent       = &i8042_platform_device->dev;
-       strlcpy(serio->name, "i8042 Aux Port", sizeof(serio->name));
-       strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+       if (idx < 0) {
+               strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
+               strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+       } else {
+               snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
+               snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
+       }
 
        port->serio = serio;
+       port->mux = idx;
+       port->irq = I8042_AUX_IRQ;
 
-       return i8042_port_register(port);
+       return 0;
 }
 
-static int __devinit i8042_create_mux_port(int index)
+static void __devinit i8042_free_kbd_port(void)
 {
-       struct serio *serio;
-       struct i8042_port *port = &i8042_ports[I8042_MUX_PORT_NO + index];
+       kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
+       i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
+}
 
-       serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-       if (!serio)
-               return -ENOMEM;
+static void __devinit i8042_free_aux_ports(void)
+{
+       int i;
 
-       serio->id.type          = SERIO_8042;
-       serio->write            = i8042_aux_write;
-       serio->open             = i8042_open;
-       serio->close            = i8042_close;
-       serio->start            = i8042_start;
-       serio->stop             = i8042_stop;
-       serio->port_data        = port;
-       serio->dev.parent       = &i8042_platform_device->dev;
-       snprintf(serio->name, sizeof(serio->name), "i8042 Aux-%d Port", index);
-       snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, index + 1);
+       for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) {
+               kfree(i8042_ports[i].serio);
+               i8042_ports[i].serio = NULL;
+       }
+}
 
-       *port = i8042_ports[I8042_AUX_PORT_NO];
-       port->exists = 0;
-       snprintf(port->name, sizeof(port->name), "AUX%d", index);
-       port->mux = index;
-       port->serio = serio;
+static void __devinit i8042_register_ports(void)
+{
+       int i;
 
-       return i8042_port_register(port);
+       for (i = 0; i < I8042_NUM_PORTS; i++) {
+               if (i8042_ports[i].serio) {
+                       printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+                               i8042_ports[i].serio->name,
+                               (unsigned long) I8042_DATA_REG,
+                               (unsigned long) I8042_COMMAND_REG,
+                               i8042_ports[i].irq);
+                       serio_register_port(i8042_ports[i].serio);
+               }
+       }
 }
 
-static int __devinit i8042_probe(struct platform_device *dev)
+static void __devinit i8042_unregister_ports(void)
 {
-       int i, have_ports = 0;
-       int err;
+       int i;
 
-       init_timer(&i8042_timer);
-       i8042_timer.function = i8042_timer_func;
+       for (i = 0; i < I8042_NUM_PORTS; i++) {
+               if (i8042_ports[i].serio) {
+                       serio_unregister_port(i8042_ports[i].serio);
+                       i8042_ports[i].serio = NULL;
+               }
+       }
+}
+
+static void i8042_free_irqs(void)
+{
+       if (i8042_aux_irq_registered)
+               free_irq(I8042_AUX_IRQ, i8042_platform_device);
+       if (i8042_kbd_irq_registered)
+               free_irq(I8042_KBD_IRQ, i8042_platform_device);
+
+       i8042_aux_irq_registered = i8042_kbd_irq_registered = 0;
+}
+
+static int __devinit i8042_setup_aux(void)
+{
+       int (*aux_enable)(void);
+       int error;
+       int i;
 
-       if (i8042_controller_init())
+       if (i8042_check_aux())
                return -ENODEV;
 
-       if (!i8042_noaux && !i8042_check_aux()) {
-               if (!i8042_nomux && !i8042_check_mux()) {
-                       for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
-                               err = i8042_create_mux_port(i);
-                               if (err)
-                                       goto err_unregister_ports;
-                       }
-               } else {
-                       err = i8042_create_aux_port();
-                       if (err)
-                               goto err_unregister_ports;
+       if (i8042_nomux || i8042_check_mux()) {
+               error = i8042_create_aux_port(-1);
+               if (error)
+                       goto err_free_ports;
+               aux_enable = i8042_enable_aux_port;
+       } else {
+               for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+                       error = i8042_create_aux_port(i);
+                       if (error)
+                               goto err_free_ports;
                }
-               have_ports = 1;
+               aux_enable = i8042_enable_mux_ports;
        }
 
-       if (!i8042_nokbd) {
-               err = i8042_create_kbd_port();
-               if (err)
-                       goto err_unregister_ports;
-               have_ports = 1;
-       }
+       error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED,
+                           "i8042", i8042_platform_device);
+       if (error)
+               goto err_free_ports;
 
-       if (!have_ports) {
-               err = -ENODEV;
-               goto err_controller_cleanup;
-       }
+       if (aux_enable())
+               goto err_free_irq;
 
-       mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
+       i8042_aux_irq_registered = 1;
        return 0;
 
- err_unregister_ports:
-       for (i = 0; i < I8042_NUM_PORTS; i++)
-               if (i8042_ports[i].serio)
-                       serio_unregister_port(i8042_ports[i].serio);
- err_controller_cleanup:
-       i8042_controller_cleanup();
+ err_free_irq:
+       free_irq(I8042_AUX_IRQ, i8042_platform_device);
+ err_free_ports:
+       i8042_free_aux_ports();
+       return error;
+}
 
-       return err;
+static int __devinit i8042_setup_kbd(void)
+{
+       int error;
+
+       error = i8042_create_kbd_port();
+       if (error)
+               return error;
+
+       error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
+                           "i8042", i8042_platform_device);
+       if (error)
+               goto err_free_port;
+
+       error = i8042_enable_kbd_port();
+       if (error)
+               goto err_free_irq;
+
+       i8042_kbd_irq_registered = 1;
+       return 0;
+
+ err_free_irq:
+       free_irq(I8042_KBD_IRQ, i8042_platform_device);
+ err_free_port:
+       i8042_free_kbd_port();
+       return error;
 }
 
-static int __devexit i8042_remove(struct platform_device *dev)
+static int __devinit i8042_probe(struct platform_device *dev)
 {
-       int i;
+       int error;
 
-       i8042_controller_cleanup();
+       error = i8042_controller_selftest();
+       if (error)
+               return error;
 
-       for (i = 0; i < I8042_NUM_PORTS; i++)
-               if (i8042_ports[i].exists)
-                       serio_unregister_port(i8042_ports[i].serio);
+       error = i8042_controller_init();
+       if (error)
+               return error;
+
+       if (!i8042_noaux) {
+               error = i8042_setup_aux();
+               if (error && error != -ENODEV && error != -EBUSY)
+                       goto out_fail;
+       }
+
+       if (!i8042_nokbd) {
+               error = i8042_setup_kbd();
+               if (error)
+                       goto out_fail;
+       }
 
-       del_timer_sync(&i8042_timer);
+/*
+ * Ok, everything is ready, let's register all serio ports
+ */
+       i8042_register_ports();
+
+       return 0;
+
+ out_fail:
+       i8042_free_aux_ports(); /* in case KBD failed but AUX not */
+       i8042_free_irqs();
+       i8042_controller_reset();
+
+       return error;
+}
+
+static int __devexit i8042_remove(struct platform_device *dev)
+{
+       i8042_unregister_ports();
+       i8042_free_irqs();
+       i8042_controller_reset();
 
        return 0;
 }
@@ -1134,8 +1167,9 @@ static int __init i8042_init(void)
        if (err)
                return err;
 
-       i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ;
-       i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ;
+       err = i8042_controller_check();
+       if (err)
+               goto err_platform_exit;
 
        err = platform_driver_register(&i8042_driver);
        if (err)
@@ -1151,6 +1185,8 @@ static int __init i8042_init(void)
        if (err)
                goto err_free_device;
 
+       panic_blink = i8042_panic_blink;
+
        return 0;
 
  err_free_device:
@@ -1167,7 +1203,6 @@ static void __exit i8042_exit(void)
 {
        platform_device_unregister(i8042_platform_device);
        platform_driver_unregister(&i8042_driver);
-
        i8042_platform_exit();
 
        panic_blink = NULL;
index af526ab9ec04205239f5d580aec7ce30323dc9e2..b3eb7a72d96114653799339dce4d9040391f4abd 100644 (file)
 
 #define I8042_CTL_TIMEOUT      10000
 
-/*
- * When the device isn't opened and it's interrupts aren't used, we poll it at
- * regular intervals to see if any characters arrived. If yes, we can start
- * probing for any mouse / keyboard connected. This is the period of the
- * polling.
- */
-
-#define I8042_POLL_PERIOD      HZ/20
-
 /*
  * Status register bits.
  */