OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQs
authorKevin Hilman <khilman@deeprootsystems.com>
Mon, 26 Apr 2010 21:59:09 +0000 (14:59 -0700)
committerKevin Hilman <khilman@deeprootsystems.com>
Wed, 12 May 2010 16:38:59 +0000 (09:38 -0700)
While handling PRCM IRQs, mask out interrupts that are not enabled in
PRM_IRQENABLE_MPU.  If these are not masked out, non-enabled
interrupts are caught, a WARN() is printed due to no 'handler' and the
events are cleared.  In addition to being noisy, this can also
interfere with independent polling of this register by SR/VP code.

This was noticed using SmartReflex transitions which cause the VPx_*
interrupts to be handled since they are set in PRM_IRQSTATUS_MPU even
but not enabled in PRM_IRQENABLE_MPU.

Acked-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
arch/arm/mach-omap2/pm34xx.c

index ea0000bc5358e196df58e88da3f54dd71f0a4706..a15aa92d384e16e42a8ece64d2f4497b08206252 100644 (file)
@@ -267,13 +267,16 @@ static int _prcm_int_handle_wakeup(void)
  */
 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 {
-       u32 irqstatus_mpu;
+       u32 irqenable_mpu, irqstatus_mpu;
        int c = 0;
 
-       do {
-               irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-                                       OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+       irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+                                        OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+       irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+                                        OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+       irqstatus_mpu &= irqenable_mpu;
 
+       do {
                if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
                        c = _prcm_int_handle_wakeup();
 
@@ -292,7 +295,11 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
                prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
                                        OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-       } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
+               irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+                                       OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+               irqstatus_mpu &= irqenable_mpu;
+
+       } while (irqstatus_mpu);
 
        return IRQ_HANDLED;
 }