raid10 Various RAID10 inspired algorithms chosen by additional params
- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
- RAID1E: Integrated Adjacent Stripe Mirroring
+ - RAID1E: Integrated Offset Stripe Mirroring
- and other similar RAID10 variants
Reference: Chapter 4 of
synchronisation state for each region.
[raid10_copies <# copies>]
- [raid10_format near]
+ [raid10_format <near|far|offset>]
These two options are used to alter the default layout of
a RAID10 configuration. The number of copies is can be
- specified, but the default is 2. There are other variations
- to how the copies are laid down - the default and only current
- option is "near". Near copies are what most people think of
- with respect to mirroring. If these options are left
- unspecified, or 'raid10_copies 2' and/or 'raid10_format near'
- are given, then the layouts for 2, 3 and 4 devices are:
+ specified, but the default is 2. There are also three
+ variations to how the copies are laid down - the default
+ is "near". Near copies are what most people think of with
+ respect to mirroring. If these options are left unspecified,
+ or 'raid10_copies 2' and/or 'raid10_format near' are given,
+ then the layouts for 2, 3 and 4 devices are:
2 drives 3 drives 4 drives
-------- ---------- --------------
A1 A1 A1 A1 A2 A1 A1 A2 A2
3-device layout is what might be called a 'RAID1E - Integrated
Adjacent Stripe Mirroring'.
+ If 'raid10_copies 2' and 'raid10_format far', then the layouts
+ for 2, 3 and 4 devices are:
+ 2 drives 3 drives 4 drives
+ -------- -------------- --------------------
+ A1 A2 A1 A2 A3 A1 A2 A3 A4
+ A3 A4 A4 A5 A6 A5 A6 A7 A8
+ A5 A6 A7 A8 A9 A9 A10 A11 A12
+ .. .. .. .. .. .. .. .. ..
+ A2 A1 A3 A1 A2 A2 A1 A4 A3
+ A4 A3 A6 A4 A5 A6 A5 A8 A7
+ A6 A5 A9 A7 A8 A10 A9 A12 A11
+ .. .. .. .. .. .. .. .. ..
+
+ If 'raid10_copies 2' and 'raid10_format offset', then the
+ layouts for 2, 3 and 4 devices are:
+ 2 drives 3 drives 4 drives
+ -------- ------------ -----------------
+ A1 A2 A1 A2 A3 A1 A2 A3 A4
+ A2 A1 A3 A1 A2 A2 A1 A4 A3
+ A3 A4 A4 A5 A6 A5 A6 A7 A8
+ A4 A3 A6 A4 A5 A6 A5 A8 A7
+ A5 A6 A7 A8 A9 A9 A10 A11 A12
+ A6 A5 A9 A7 A8 A10 A9 A12 A11
+ .. .. .. .. .. .. .. .. ..
+ Here we see layouts closely akin to 'RAID1E - Integrated
+ Offset Stripe Mirroring'.
+
<#raid_devs>: The number of devices composing the array.
Each device consists of two entries. The first is the device
containing the metadata (if any); the second is the one containing the
1.3.0 Added support for RAID 10
1.3.1 Allow device replacement/rebuild for RAID 10
1.3.2 Fix/improve redundancy checking for RAID10
+1.4.0 Non-functional change. Removes arg from mapping function.
+1.4.1 Add RAID10 "far" and "offset" algorithm support.
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Supported chips:
* Analog Devices ADT7410
Prefix: 'adt7410'
- Addresses scanned: I2C 0x48 - 0x4B
+ Addresses scanned: None
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
+ * Analog Devices ADT7420
+ Prefix: 'adt7420'
+ Addresses scanned: None
+ Datasheet: Publicly available at the Analog Devices website
+ http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
Author: Hartmut Knaack <knaack.h@gmx.de>
Besides, it can completely power down its ADC, if power management is
required.
+The ADT7420 is register compatible, the only differences being the package,
+a slightly narrower operating temperature range (-40°C to +150°C), and a
+better accuracy (0.25°C instead of 0.50°C.)
+
Configuration Notes
-------------------
Addresses scanned: I2C 0x18 - 0x1f
Author:
- Guenter Roeck <guenter.roeck@ericsson.com>
+ Guenter Roeck <linux@roeck-us.net>
Description
Documentation:
http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Datasheet:
http://www.national.com/pf/LM/LM5066.html
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
* Linear Technology LTC2978
Prefix: 'ltc2978'
Addresses scanned: -
- Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
+ Datasheet: http://www.linear.com/product/ltc2978
* Linear Technology LTC3880
Prefix: 'ltc3880'
Addresses scanned: -
- Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
+ Datasheet: http://www.linear.com/product/ltc3880
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Datasheet:
http://cds.linear.com/docs/Datasheet/42612fb.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
Addresses scanned: -
Datasheet: n.a.
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Module Parameters
http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------------------------------
-3C505 NETWORK DRIVER
-M: Philip Blundell <philb@gnu.org>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/i825xx/3c505*
-
3C59X NETWORK DRIVER
M: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/video/cyber2000fb.*
-CYCLADES 2X SYNC CARD DRIVER
-M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-W: http://oops.ghostprotocols.net:81/blog
-S: Maintained
-F: drivers/net/wan/cycx*
-
CYCLADES ASYNC MUX DRIVER
W: http://www.cyclades.com/
S: Orphan
F: drivers/video/s1d13xxxfb.c
F: include/video/s1d13xxxfb.h
-ETHEREXPRESS-16 NETWORK DRIVER
-M: Philip Blundell <philb@gnu.org>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/i825xx/eexpress.*
-
ETHERNET BRIDGE
M: Stephen Hemminger <stephen@networkplumber.org>
L: bridge@lists.linux-foundation.org
STEPUP4((t)+16, fn)
_GLOBAL(powerpc_sha_transform)
- PPC_STLU r1,-STACKFRAMESIZE(r1)
+ PPC_STLU r1,-INT_FRAME_SIZE(r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
- addi r1,r1,STACKFRAMESIZE
+ addi r1,r1,INT_FRAME_SIZE
blr
#define smp_mb__before_clear_bit() smp_mb()
#define smp_mb__after_clear_bit() smp_mb()
-#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
-
/* Macro for generating the ***_bits() functions */
#define DEFINE_BITOP(fn, op, prefix, postfix) \
static __inline__ void fn(unsigned long mask, \
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
#define SPRN_FSCR 0x099 /* Facility Status & Control Register */
-#define FSCR_TAR (1<<8) /* Enable Target Adress Register */
+#define FSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
+#define FSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
#define SPRN_TAR 0x32f /* Target Address Register */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
#define LPCR_VPM0 (1ul << (63-0))
COMPAT_SYS(process_vm_readv)
COMPAT_SYS(process_vm_writev)
SYSCALL(finit_module)
+SYSCALL(ni_syscall) /* sys_kcmp */
#include <uapi/asm/unistd.h>
-#define __NR_syscalls 354
+#define __NR_syscalls 355
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
#define __NR_process_vm_readv 351
#define __NR_process_vm_writev 352
#define __NR_finit_module 353
+#define __NR_kcmp 354
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
_GLOBAL(__setup_cpu_power8)
mflr r11
+ bl __init_FSCR
bl __init_hvmode_206
mtlr r11
beqlr
mfspr r3,SPRN_LPCR
oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
- bl __init_FSCR
bl __init_TLB
mtlr r11
blr
_GLOBAL(__restore_cpu_power8)
mflr r11
+ bl __init_FSCR
mfmsr r3
rldicl. r0,r3,4,63
beqlr
__init_FSCR:
mfspr r3,SPRN_FSCR
- ori r3,r3,FSCR_TAR
+ ori r3,r3,FSCR_TAR|FSCR_DSCR
mtspr SPRN_FSCR,r3
blr
mflr r10 ; \
ld r12,PACAKBASE(r13) ; \
LOAD_HANDLER(r12, system_call_entry_direct) ; \
- mtlr r12 ; \
+ mtctr r12 ; \
mfspr r12,SPRN_SRR1 ; \
/* Re-use of r13... No spare regs to do this */ \
li r13,MSR_RI ; \
mtmsrd r13,1 ; \
GET_PACA(r13) ; /* get r13 back */ \
- blr ;
+ bctr ;
#else
/* We can branch directly */
#define SYSCALL_PSERIES_2_DIRECT \
#include <linux/list.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/string.h>
#include <asm/hvcall.h>
#include <asm/hvcserver.h>
= (unsigned int)last_p_partition_ID;
/* copy the Null-term char too */
- strncpy(&next_partner_info->location_code[0],
+ strlcpy(&next_partner_info->location_code[0],
(char *)&pi_buff[2],
- strlen((char *)&pi_buff[2]) + 1);
+ sizeof(next_partner_info->location_code));
list_add_tail(&(next_partner_info->node), head);
next_partner_info = NULL;
if (ret < 0) {
dev_err(map->dev, "IRQ thread failed to resume: %d\n",
ret);
+ pm_runtime_put(map->dev);
return IRQ_NONE;
}
}
return;
}
+ spin_lock_init(&pc_host->cfgspace_lock);
+
pc->host_controller = pc_host;
pc_host->pci_controller.io_resource = &pc_host->io_resource;
pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
static LIST_HEAD(rng_list);
static DEFINE_MUTEX(rng_mutex);
static int data_avail;
-static u8 rng_buffer[SMP_CACHE_BYTES < 32 ? 32 : SMP_CACHE_BYTES]
- __cacheline_aligned;
+static u8 *rng_buffer;
+
+static size_t rng_buffer_size(void)
+{
+ return SMP_CACHE_BYTES < 32 ? 32 : SMP_CACHE_BYTES;
+}
static inline int hwrng_init(struct hwrng *rng)
{
if (!data_avail) {
bytes_read = rng_get_data(current_rng, rng_buffer,
- sizeof(rng_buffer),
+ rng_buffer_size(),
!(filp->f_flags & O_NONBLOCK));
if (bytes_read < 0) {
err = bytes_read;
mutex_lock(&rng_mutex);
+ /* kmalloc makes this safe for virt_to_page() in virtio_rng.c */
+ err = -ENOMEM;
+ if (!rng_buffer) {
+ rng_buffer = kmalloc(rng_buffer_size(), GFP_KERNEL);
+ if (!rng_buffer)
+ goto out_unlock;
+ }
+
/* Must not register two RNGs with the same name. */
err = -EEXIST;
list_for_each_entry(tmp, &rng_list, list) {
(task_active_pid_ns(current) != &init_pid_ns))
return;
+ /* Can only change if privileged. */
+ if (!capable(CAP_NET_ADMIN)) {
+ err = EPERM;
+ goto out;
+ }
+
mc_op = (enum proc_cn_mcast_op *)msg->data;
switch (*mc_op) {
case PROC_CN_MCAST_LISTEN:
err = EINVAL;
break;
}
+
+out:
cn_proc_ack(err, msg->seq, msg->ack);
}
return data & (1 << bit) ? 1 : 0;
}
-static int ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
+static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
{
- return (ichx_priv.use_gpio & (1 << (nr / 32))) ? 0 : -ENXIO;
+ return ichx_priv.use_gpio & (1 << (nr / 32));
}
static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
static void gpiod_free(struct gpio_desc *desc);
static int gpiod_direction_input(struct gpio_desc *desc);
static int gpiod_direction_output(struct gpio_desc *desc, int value);
+static int gpiod_get_direction(const struct gpio_desc *desc);
static int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
-static int gpiod_get_value_cansleep(struct gpio_desc *desc);
+static int gpiod_get_value_cansleep(const struct gpio_desc *desc);
static void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
-static int gpiod_get_value(struct gpio_desc *desc);
+static int gpiod_get_value(const struct gpio_desc *desc);
static void gpiod_set_value(struct gpio_desc *desc, int value);
-static int gpiod_cansleep(struct gpio_desc *desc);
-static int gpiod_to_irq(struct gpio_desc *desc);
+static int gpiod_cansleep(const struct gpio_desc *desc);
+static int gpiod_to_irq(const struct gpio_desc *desc);
static int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
static int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
return 0;
}
-/* caller holds gpio_lock *OR* gpio is marked as requested */
-static struct gpio_chip *gpiod_to_chip(struct gpio_desc *desc)
+static struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
{
- return desc->chip;
+ return desc ? desc->chip : NULL;
}
+/* caller holds gpio_lock *OR* gpio is marked as requested */
struct gpio_chip *gpio_to_chip(unsigned gpio)
{
return gpiod_to_chip(gpio_to_desc(gpio));
}
/* caller ensures gpio is valid and requested, chip->get_direction may sleep */
-static int gpiod_get_direction(struct gpio_desc *desc)
+static int gpiod_get_direction(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
unsigned offset;
if (status > 0) {
/* GPIOF_DIR_IN, or other positive */
status = 1;
- clear_bit(FLAG_IS_OUT, &desc->flags);
+ /* FLAG_IS_OUT is just a cache of the result of get_direction(),
+ * so it does not affect constness per se */
+ clear_bit(FLAG_IS_OUT, &((struct gpio_desc *)desc)->flags);
}
if (status == 0) {
/* GPIOF_DIR_OUT */
- set_bit(FLAG_IS_OUT, &desc->flags);
+ set_bit(FLAG_IS_OUT, &((struct gpio_desc *)desc)->flags);
}
return status;
}
static ssize_t gpio_direction_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct gpio_desc *desc = dev_get_drvdata(dev);
+ const struct gpio_desc *desc = dev_get_drvdata(dev);
ssize_t status;
mutex_lock(&sysfs_lock);
goto done;
desc = gpio_to_desc(gpio);
+ /* reject invalid GPIOs */
+ if (!desc) {
+ pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
+ return -EINVAL;
+ }
/* No extra locking here; FLAG_SYSFS just signifies that the
* request and export were done by on behalf of userspace, so
if (status < 0)
goto done;
- status = -EINVAL;
-
desc = gpio_to_desc(gpio);
/* reject bogus commands (gpio_unexport ignores them) */
- if (!desc)
- goto done;
+ if (!desc) {
+ pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
+ return -EINVAL;
+ }
+
+ status = -EINVAL;
/* No extra locking here; FLAG_SYSFS just signifies that the
* request and export were done by on behalf of userspace, so
{
int status = -EINVAL;
- if (!desc)
- goto done;
+ if (!desc) {
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return -EINVAL;
+ }
mutex_lock(&sysfs_lock);
mutex_unlock(&sysfs_lock);
-done:
if (status)
pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
status);
struct device *dev = NULL;
int status = -EINVAL;
- if (!desc)
- goto done;
+ if (!desc) {
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return -EINVAL;
+ }
mutex_lock(&sysfs_lock);
unlock:
mutex_unlock(&sysfs_lock);
-done:
if (status)
pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
status);
struct device *dev = NULL;
if (!desc) {
- status = -EINVAL;
- goto done;
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return;
}
mutex_lock(&sysfs_lock);
device_unregister(dev);
put_device(dev);
}
-done:
+
if (status)
pr_debug("%s: gpio%d status %d\n", __func__, desc_to_gpio(desc),
status);
int status = -EPROBE_DEFER;
unsigned long flags;
- spin_lock_irqsave(&gpio_lock, flags);
-
if (!desc) {
- status = -EINVAL;
- goto done;
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return -EINVAL;
}
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
chip = desc->chip;
if (chip == NULL)
goto done;
done:
if (status)
pr_debug("_gpio_request: gpio-%d (%s) status %d\n",
- desc ? desc_to_gpio(desc) : -1,
- label ? : "?", status);
+ desc_to_gpio(desc), label ? : "?", status);
spin_unlock_irqrestore(&gpio_lock, flags);
return status;
}
int status = -EINVAL;
int offset;
+ if (!desc) {
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return -EINVAL;
+ }
+
spin_lock_irqsave(&gpio_lock, flags);
- if (!desc)
- goto fail;
chip = desc->chip;
if (!chip || !chip->get || !chip->direction_input)
goto fail;
return status;
fail:
spin_unlock_irqrestore(&gpio_lock, flags);
- if (status) {
- int gpio = -1;
- if (desc)
- gpio = desc_to_gpio(desc);
- pr_debug("%s: gpio-%d status %d\n",
- __func__, gpio, status);
- }
+ if (status)
+ pr_debug("%s: gpio-%d status %d\n", __func__,
+ desc_to_gpio(desc), status);
return status;
}
int status = -EINVAL;
int offset;
+ if (!desc) {
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return -EINVAL;
+ }
+
/* Open drain pin should not be driven to 1 */
if (value && test_bit(FLAG_OPEN_DRAIN, &desc->flags))
return gpiod_direction_input(desc);
spin_lock_irqsave(&gpio_lock, flags);
- if (!desc)
- goto fail;
chip = desc->chip;
if (!chip || !chip->set || !chip->direction_output)
goto fail;
return status;
fail:
spin_unlock_irqrestore(&gpio_lock, flags);
- if (status) {
- int gpio = -1;
- if (desc)
- gpio = desc_to_gpio(desc);
- pr_debug("%s: gpio-%d status %d\n",
- __func__, gpio, status);
- }
+ if (status)
+ pr_debug("%s: gpio-%d status %d\n", __func__,
+ desc_to_gpio(desc), status);
return status;
}
int status = -EINVAL;
int offset;
+ if (!desc) {
+ pr_warn("%s: invalid GPIO\n", __func__);
+ return -EINVAL;
+ }
+
spin_lock_irqsave(&gpio_lock, flags);
- if (!desc)
- goto fail;
chip = desc->chip;
if (!chip || !chip->set || !chip->set_debounce)
goto fail;
fail:
spin_unlock_irqrestore(&gpio_lock, flags);
- if (status) {
- int gpio = -1;
- if (desc)
- gpio = desc_to_gpio(desc);
- pr_debug("%s: gpio-%d status %d\n",
- __func__, gpio, status);
- }
+ if (status)
+ pr_debug("%s: gpio-%d status %d\n", __func__,
+ desc_to_gpio(desc), status);
return status;
}
* It returns the zero or nonzero value provided by the associated
* gpio_chip.get() method; or zero if no such method is provided.
*/
-static int gpiod_get_value(struct gpio_desc *desc)
+static int gpiod_get_value(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
int value;
int offset;
+ if (!desc)
+ return 0;
chip = desc->chip;
offset = gpio_chip_hwgpio(desc);
/* Should be using gpio_get_value_cansleep() */
{
struct gpio_chip *chip;
+ if (!desc)
+ return;
chip = desc->chip;
/* Should be using gpio_set_value_cansleep() */
WARN_ON(chip->can_sleep);
* This is used directly or indirectly to implement gpio_cansleep(). It
* returns nonzero if access reading or writing the GPIO value can sleep.
*/
-static int gpiod_cansleep(struct gpio_desc *desc)
+static int gpiod_cansleep(const struct gpio_desc *desc)
{
+ if (!desc)
+ return 0;
/* only call this on GPIOs that are valid! */
return desc->chip->can_sleep;
}
* It returns the number of the IRQ signaled by this (input) GPIO,
* or a negative errno.
*/
-static int gpiod_to_irq(struct gpio_desc *desc)
+static int gpiod_to_irq(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
int offset;
+ if (!desc)
+ return -EINVAL;
chip = desc->chip;
offset = gpio_chip_hwgpio(desc);
return chip->to_irq ? chip->to_irq(chip, offset) : -ENXIO;
* Common examples include ones connected to I2C or SPI chips.
*/
-static int gpiod_get_value_cansleep(struct gpio_desc *desc)
+static int gpiod_get_value_cansleep(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
int value;
int offset;
might_sleep_if(extra_checks);
+ if (!desc)
+ return 0;
chip = desc->chip;
offset = gpio_chip_hwgpio(desc);
value = chip->get ? chip->get(chip, offset) : 0;
struct gpio_chip *chip;
might_sleep_if(extra_checks);
+ if (!desc)
+ return;
chip = desc->chip;
trace_gpio_value(desc_to_gpio(desc), 0, value);
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
int temp_min, temp_max;
int vout_min[8], vout_max[8];
int iout_max[2];
- int temp2_max[2];
+ int temp2_max;
struct pmbus_driver_info info;
};
ret = pmbus_read_word_data(client, page,
LTC3880_MFR_TEMPERATURE2_PEAK);
if (ret >= 0) {
- if (lin11_to_val(ret)
- > lin11_to_val(data->temp2_max[page]))
- data->temp2_max[page] = ret;
- ret = data->temp2_max[page];
+ if (lin11_to_val(ret) > lin11_to_val(data->temp2_max))
+ data->temp2_max = ret;
+ ret = data->temp2_max;
}
break;
case PMBUS_VIRT_READ_VIN_MIN:
switch (reg) {
case PMBUS_VIRT_RESET_IOUT_HISTORY:
- data->iout_max[page] = 0x7fff;
+ data->iout_max[page] = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_TEMP2_HISTORY:
- data->temp2_max[page] = 0x7fff;
+ data->temp2_max = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
break;
case PMBUS_VIRT_RESET_VIN_HISTORY:
data->vin_min = 0x7bff;
- data->vin_max = 0;
+ data->vin_max = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
data->temp_min = 0x7bff;
- data->temp_max = 0x7fff;
+ data->temp_max = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
default:
info = &data->info;
info->write_word_data = ltc2978_write_word_data;
- data->vout_min[0] = 0xffff;
data->vin_min = 0x7bff;
+ data->vin_max = 0x7c00;
data->temp_min = 0x7bff;
- data->temp_max = 0x7fff;
+ data->temp_max = 0x7c00;
+ data->temp2_max = 0x7c00;
- switch (id->driver_data) {
+ switch (data->id) {
case ltc2978:
info->read_word_data = ltc2978_read_word_data;
info->pages = 8;
for (i = 1; i < 8; i++) {
info->func[i] = PMBUS_HAVE_VOUT
| PMBUS_HAVE_STATUS_VOUT;
- data->vout_min[i] = 0xffff;
}
break;
case ltc3880:
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
| PMBUS_HAVE_POUT
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
- data->vout_min[1] = 0xffff;
+ data->iout_max[0] = 0x7c00;
+ data->iout_max[1] = 0x7c00;
break;
default:
return -ENODEV;
}
+ for (i = 0; i < info->pages; i++)
+ data->vout_min[i] = 0xffff;
return pmbus_do_probe(client, id, info);
}
if (voltage)
data->supply_uv = voltage;
- regulator_enable(data->reg);
+ ret = regulator_enable(data->reg);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "failed to enable regulator: %d\n", ret);
+ return ret;
+ }
+
/*
* Setup a notifier block to update this if another device
* causes the voltage to change
// Allocate URBs and buffers for interrupt endpoint
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- return -ENOMEM;
+ goto err1;
}
intr->urb = urb;
buf = kmalloc(INT_PKT_SIZE, GFP_KERNEL);
if (!buf) {
- return -ENOMEM;
+ goto err2;
}
endpoint = &altsetting->endpoint[EP_INT-1];
endpoint->desc.bInterval);
return 0;
+err2:
+ usb_free_urb(intr->urb);
+ intr->urb = NULL;
+err1:
+ usb_free_urb(ctrl->urb);
+ ctrl->urb = NULL;
+
+ return -ENOMEM;
}
/*
If unsure, say Y.
-config MULTICORE_RAID456
- bool "RAID-4/RAID-5/RAID-6 Multicore processing (EXPERIMENTAL)"
- depends on MD_RAID456
- depends on SMP
- depends on EXPERIMENTAL
- ---help---
- Enable the raid456 module to dispatch per-stripe raid operations to a
- thread pool.
-
- If unsure, say N.
-
config MD_MULTIPATH
tristate "Multipath I/O support"
depends on BLK_DEV_MD
{"raid6_nc", "RAID6 (N continue)", 2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE}
};
+static char *raid10_md_layout_to_format(int layout)
+{
+ /*
+ * Bit 16 and 17 stand for "offset" and "use_far_sets"
+ * Refer to MD's raid10.c for details
+ */
+ if ((layout & 0x10000) && (layout & 0x20000))
+ return "offset";
+
+ if ((layout & 0xFF) > 1)
+ return "near";
+
+ return "far";
+}
+
static unsigned raid10_md_layout_to_copies(int layout)
{
- return layout & 0xFF;
+ if ((layout & 0xFF) > 1)
+ return layout & 0xFF;
+ return (layout >> 8) & 0xFF;
}
static int raid10_format_to_md_layout(char *format, unsigned copies)
{
- /* 1 "far" copy, and 'copies' "near" copies */
- return (1 << 8) | (copies & 0xFF);
+ unsigned n = 1, f = 1;
+
+ if (!strcmp("near", format))
+ n = copies;
+ else
+ f = copies;
+
+ if (!strcmp("offset", format))
+ return 0x30000 | (f << 8) | n;
+
+ if (!strcmp("far", format))
+ return 0x20000 | (f << 8) | n;
+
+ return (f << 8) | n;
}
static struct raid_type *get_raid_type(char *name)
{
unsigned i, rebuild_cnt = 0;
unsigned rebuilds_per_group, copies, d;
+ unsigned group_size, last_group_start;
for (i = 0; i < rs->md.raid_disks; i++)
if (!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
* as long as the failed devices occur in different mirror
* groups (i.e. different stripes).
*
- * Right now, we only allow for "near" copies. When other
- * formats are added, we will have to check those too.
- *
* When checking "near" format, make sure no adjacent devices
* have failed beyond what can be handled. In addition to the
* simple case where the number of devices is a multiple of the
* A A B B C
* C D D E E
*/
- for (i = 0; i < rs->md.raid_disks * copies; i++) {
- if (!(i % copies))
+ if (!strcmp("near", raid10_md_layout_to_format(rs->md.layout))) {
+ for (i = 0; i < rs->md.raid_disks * copies; i++) {
+ if (!(i % copies))
+ rebuilds_per_group = 0;
+ d = i % rs->md.raid_disks;
+ if ((!rs->dev[d].rdev.sb_page ||
+ !test_bit(In_sync, &rs->dev[d].rdev.flags)) &&
+ (++rebuilds_per_group >= copies))
+ goto too_many;
+ }
+ break;
+ }
+
+ /*
+ * When checking "far" and "offset" formats, we need to ensure
+ * that the device that holds its copy is not also dead or
+ * being rebuilt. (Note that "far" and "offset" formats only
+ * support two copies right now. These formats also only ever
+ * use the 'use_far_sets' variant.)
+ *
+ * This check is somewhat complicated by the need to account
+ * for arrays that are not a multiple of (far) copies. This
+ * results in the need to treat the last (potentially larger)
+ * set differently.
+ */
+ group_size = (rs->md.raid_disks / copies);
+ last_group_start = (rs->md.raid_disks / group_size) - 1;
+ last_group_start *= group_size;
+ for (i = 0; i < rs->md.raid_disks; i++) {
+ if (!(i % copies) && !(i > last_group_start))
rebuilds_per_group = 0;
- d = i % rs->md.raid_disks;
- if ((!rs->dev[d].rdev.sb_page ||
- !test_bit(In_sync, &rs->dev[d].rdev.flags)) &&
+ if ((!rs->dev[i].rdev.sb_page ||
+ !test_bit(In_sync, &rs->dev[i].rdev.flags)) &&
(++rebuilds_per_group >= copies))
- goto too_many;
+ goto too_many;
}
break;
default:
*
* RAID10-only options:
* [raid10_copies <# copies>] Number of copies. (Default: 2)
- * [raid10_format <near>] Layout algorithm. (Default: near)
+ * [raid10_format <near|far|offset>] Layout algorithm. (Default: near)
*/
static int parse_raid_params(struct raid_set *rs, char **argv,
unsigned num_raid_params)
rs->ti->error = "'raid10_format' is an invalid parameter for this RAID type";
return -EINVAL;
}
- if (strcmp("near", argv[i])) {
+ if (strcmp("near", argv[i]) &&
+ strcmp("far", argv[i]) &&
+ strcmp("offset", argv[i])) {
rs->ti->error = "Invalid 'raid10_format' value given";
return -EINVAL;
}
return -EINVAL;
}
+ /*
+ * If the format is not "near", we only support
+ * two copies at the moment.
+ */
+ if (strcmp("near", raid10_format) && (raid10_copies > 2)) {
+ rs->ti->error = "Too many copies for given RAID10 format.";
+ return -EINVAL;
+ }
+
/* (Len * #mirrors) / #devices */
sectors_per_dev = rs->ti->len * raid10_copies;
sector_div(sectors_per_dev, rs->md.raid_disks);
/*
* Reshaping is not currently allowed
*/
- if ((le32_to_cpu(sb->level) != mddev->level) ||
- (le32_to_cpu(sb->layout) != mddev->layout) ||
- (le32_to_cpu(sb->stripe_sectors) != mddev->chunk_sectors)) {
- DMERR("Reshaping arrays not yet supported.");
+ if (le32_to_cpu(sb->level) != mddev->level) {
+ DMERR("Reshaping arrays not yet supported. (RAID level change)");
+ return -EINVAL;
+ }
+ if (le32_to_cpu(sb->layout) != mddev->layout) {
+ DMERR("Reshaping arrays not yet supported. (RAID layout change)");
+ DMERR(" 0x%X vs 0x%X", le32_to_cpu(sb->layout), mddev->layout);
+ DMERR(" Old layout: %s w/ %d copies",
+ raid10_md_layout_to_format(le32_to_cpu(sb->layout)),
+ raid10_md_layout_to_copies(le32_to_cpu(sb->layout)));
+ DMERR(" New layout: %s w/ %d copies",
+ raid10_md_layout_to_format(mddev->layout),
+ raid10_md_layout_to_copies(mddev->layout));
+ return -EINVAL;
+ }
+ if (le32_to_cpu(sb->stripe_sectors) != mddev->chunk_sectors) {
+ DMERR("Reshaping arrays not yet supported. (stripe sectors change)");
return -EINVAL;
}
/* We can only change the number of devices in RAID1 right now */
if ((rs->raid_type->level != 1) &&
(le32_to_cpu(sb->num_devices) != mddev->raid_disks)) {
- DMERR("Reshaping arrays not yet supported.");
+ DMERR("Reshaping arrays not yet supported. (device count change)");
return -EINVAL;
}
raid10_md_layout_to_copies(rs->md.layout));
if (rs->print_flags & DMPF_RAID10_FORMAT)
- DMEMIT(" raid10_format near");
+ DMEMIT(" raid10_format %s",
+ raid10_md_layout_to_format(rs->md.layout));
DMEMIT(" %d", rs->md.raid_disks);
for (i = 0; i < rs->md.raid_disks; i++) {
static int __init dm_raid_init(void)
{
+ DMINFO("Loading target version %u.%u.%u",
+ raid_target.version[0],
+ raid_target.version[1],
+ raid_target.version[2]);
return dm_register_target(&raid_target);
}
bio_io_error(bio);
return;
}
+ if (mddev->ro == 1 && unlikely(rw == WRITE)) {
+ bio_endio(bio, bio_sectors(bio) == 0 ? 0 : -EROFS);
+ return;
+ }
smp_rmb(); /* Ensure implications of 'active' are visible */
rcu_read_lock();
if (mddev->suspended) {
} else if (!sectors)
sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
rdev->data_offset;
+ if (!my_mddev->pers->resize)
+ /* Cannot change size for RAID0 or Linear etc */
+ return -EINVAL;
}
if (sectors < my_mddev->dev_sectors)
return -EINVAL; /* component must fit device */
mddev->ro = 0;
sysfs_notify_dirent_safe(mddev->sysfs_state);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- md_wakeup_thread(mddev->thread);
+ /* mddev_unlock will wake thread */
+ /* If a device failed while we were read-only, we
+ * need to make sure the metadata is updated now.
+ */
+ if (test_bit(MD_CHANGE_DEVS, &mddev->flags)) {
+ mddev_unlock(mddev);
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_DEVS, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
+ mddev_lock(mddev);
+ }
} else {
err = -EROFS;
goto abort_unlock;
rdev1->new_raid_disk = j;
}
- if (j < 0 || j >= mddev->raid_disks) {
+ if (j < 0) {
+ printk(KERN_ERR
+ "md/raid0:%s: remove inactive devices before converting to RAID0\n",
+ mdname(mddev));
+ goto abort;
+ }
+ if (j >= mddev->raid_disks) {
printk(KERN_ERR "md/raid0:%s: bad disk number %d - "
"aborting!\n", mdname(mddev), j);
goto abort;
kfree(conf->strip_zone);
kfree(conf->devlist);
kfree(conf);
- *private_conf = NULL;
+ *private_conf = ERR_PTR(err);
return err;
}
"%s does not support generic reshape\n", __func__);
rdev_for_each(rdev, mddev)
- array_sectors += rdev->sectors;
+ array_sectors += (rdev->sectors &
+ ~(sector_t)(mddev->chunk_sectors-1));
return array_sectors;
}
bio_list_merge(&conf->pending_bio_list, &plug->pending);
conf->pending_count += plug->pending_cnt;
spin_unlock_irq(&conf->device_lock);
+ wake_up(&conf->wait_barrier);
md_wakeup_thread(mddev->thread);
kfree(plug);
return;
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
const unsigned long do_discard = (bio->bi_rw
& (REQ_DISCARD | REQ_SECURE));
+ const unsigned long do_same = (bio->bi_rw & REQ_WRITE_SAME);
struct md_rdev *blocked_rdev;
struct blk_plug_cb *cb;
struct raid1_plug_cb *plug = NULL;
conf->mirrors[i].rdev->data_offset);
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | do_flush_fua | do_sync | do_discard;
+ mbio->bi_rw =
+ WRITE | do_flush_fua | do_sync | do_discard | do_same;
mbio->bi_private = r1_bio;
atomic_inc(&r1_bio->remaining);
if (IS_ERR(conf))
return PTR_ERR(conf);
+ if (mddev->queue)
+ blk_queue_max_write_same_sectors(mddev->queue,
+ mddev->chunk_sectors);
rdev_for_each(rdev, mddev) {
if (!mddev->gendisk)
continue;
* near_copies (stored in low byte of layout)
* far_copies (stored in second byte of layout)
* far_offset (stored in bit 16 of layout )
+ * use_far_sets (stored in bit 17 of layout )
*
- * The data to be stored is divided into chunks using chunksize.
- * Each device is divided into far_copies sections.
- * In each section, chunks are laid out in a style similar to raid0, but
- * near_copies copies of each chunk is stored (each on a different drive).
- * The starting device for each section is offset near_copies from the starting
- * device of the previous section.
- * Thus they are (near_copies*far_copies) of each chunk, and each is on a different
- * drive.
- * near_copies and far_copies must be at least one, and their product is at most
- * raid_disks.
+ * The data to be stored is divided into chunks using chunksize. Each device
+ * is divided into far_copies sections. In each section, chunks are laid out
+ * in a style similar to raid0, but near_copies copies of each chunk is stored
+ * (each on a different drive). The starting device for each section is offset
+ * near_copies from the starting device of the previous section. Thus there
+ * are (near_copies * far_copies) of each chunk, and each is on a different
+ * drive. near_copies and far_copies must be at least one, and their product
+ * is at most raid_disks.
*
* If far_offset is true, then the far_copies are handled a bit differently.
- * The copies are still in different stripes, but instead of be very far apart
- * on disk, there are adjacent stripes.
+ * The copies are still in different stripes, but instead of being very far
+ * apart on disk, there are adjacent stripes.
+ *
+ * The far and offset algorithms are handled slightly differently if
+ * 'use_far_sets' is true. In this case, the array's devices are grouped into
+ * sets that are (near_copies * far_copies) in size. The far copied stripes
+ * are still shifted by 'near_copies' devices, but this shifting stays confined
+ * to the set rather than the entire array. This is done to improve the number
+ * of device combinations that can fail without causing the array to fail.
+ * Example 'far' algorithm w/o 'use_far_sets' (each letter represents a chunk
+ * on a device):
+ * A B C D A B C D E
+ * ... ...
+ * D A B C E A B C D
+ * Example 'far' algorithm w/ 'use_far_sets' enabled (sets illustrated w/ []'s):
+ * [A B] [C D] [A B] [C D E]
+ * |...| |...| |...| | ... |
+ * [B A] [D C] [B A] [E C D]
*/
/*
sector_t stripe;
int dev;
int slot = 0;
+ int last_far_set_start, last_far_set_size;
+
+ last_far_set_start = (geo->raid_disks / geo->far_set_size) - 1;
+ last_far_set_start *= geo->far_set_size;
+
+ last_far_set_size = geo->far_set_size;
+ last_far_set_size += (geo->raid_disks % geo->far_set_size);
/* now calculate first sector/dev */
chunk = r10bio->sector >> geo->chunk_shift;
/* and calculate all the others */
for (n = 0; n < geo->near_copies; n++) {
int d = dev;
+ int set;
sector_t s = sector;
- r10bio->devs[slot].addr = sector;
r10bio->devs[slot].devnum = d;
+ r10bio->devs[slot].addr = s;
slot++;
for (f = 1; f < geo->far_copies; f++) {
+ set = d / geo->far_set_size;
d += geo->near_copies;
- if (d >= geo->raid_disks)
- d -= geo->raid_disks;
+
+ if ((geo->raid_disks % geo->far_set_size) &&
+ (d > last_far_set_start)) {
+ d -= last_far_set_start;
+ d %= last_far_set_size;
+ d += last_far_set_start;
+ } else {
+ d %= geo->far_set_size;
+ d += geo->far_set_size * set;
+ }
s += geo->stride;
r10bio->devs[slot].devnum = d;
r10bio->devs[slot].addr = s;
* or recovery, so reshape isn't happening
*/
struct geom *geo = &conf->geo;
+ int far_set_start = (dev / geo->far_set_size) * geo->far_set_size;
+ int far_set_size = geo->far_set_size;
+ int last_far_set_start;
+
+ if (geo->raid_disks % geo->far_set_size) {
+ last_far_set_start = (geo->raid_disks / geo->far_set_size) - 1;
+ last_far_set_start *= geo->far_set_size;
+
+ if (dev >= last_far_set_start) {
+ far_set_size = geo->far_set_size;
+ far_set_size += (geo->raid_disks % geo->far_set_size);
+ far_set_start = last_far_set_start;
+ }
+ }
offset = sector & geo->chunk_mask;
if (geo->far_offset) {
chunk = sector >> geo->chunk_shift;
fc = sector_div(chunk, geo->far_copies);
dev -= fc * geo->near_copies;
- if (dev < 0)
- dev += geo->raid_disks;
+ if (dev < far_set_start)
+ dev += far_set_size;
} else {
while (sector >= geo->stride) {
sector -= geo->stride;
- if (dev < geo->near_copies)
- dev += geo->raid_disks - geo->near_copies;
+ if (dev < (geo->near_copies + far_set_start))
+ dev += far_set_size - geo->near_copies;
else
dev -= geo->near_copies;
}
bio_list_merge(&conf->pending_bio_list, &plug->pending);
conf->pending_count += plug->pending_cnt;
spin_unlock_irq(&conf->device_lock);
+ wake_up(&conf->wait_barrier);
md_wakeup_thread(mddev->thread);
kfree(plug);
return;
const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
const unsigned long do_discard = (bio->bi_rw
& (REQ_DISCARD | REQ_SECURE));
+ const unsigned long do_same = (bio->bi_rw & REQ_WRITE_SAME);
unsigned long flags;
struct md_rdev *blocked_rdev;
struct blk_plug_cb *cb;
rdev));
mbio->bi_bdev = rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+ mbio->bi_rw =
+ WRITE | do_sync | do_fua | do_discard | do_same;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
r10_bio, rdev));
mbio->bi_bdev = rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+ mbio->bi_rw =
+ WRITE | do_sync | do_fua | do_discard | do_same;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
disks = mddev->raid_disks + mddev->delta_disks;
break;
}
- if (layout >> 17)
+ if (layout >> 18)
return -1;
if (chunk < (PAGE_SIZE >> 9) ||
!is_power_of_2(chunk))
geo->near_copies = nc;
geo->far_copies = fc;
geo->far_offset = fo;
+ geo->far_set_size = (layout & (1<<17)) ? disks / fc : disks;
geo->chunk_mask = chunk - 1;
geo->chunk_shift = ffz(~chunk);
return nc*fc;
if (mddev->queue) {
blk_queue_max_discard_sectors(mddev->queue,
mddev->chunk_sectors);
+ blk_queue_max_write_same_sectors(mddev->queue,
+ mddev->chunk_sectors);
blk_queue_io_min(mddev->queue, chunk_size);
if (conf->geo.raid_disks % conf->geo.near_copies)
blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
* far_offset, in which case it is
* 1 stripe.
*/
+ int far_set_size; /* The number of devices in a set,
+ * where a 'set' are devices that
+ * contain far/offset copies of
+ * each other.
+ */
int chunk_shift; /* shift from chunks to sectors */
sector_t chunk_mask;
} prev, geo;
&sh->ops.zero_sum_result, percpu->spare_page, &submit);
}
-static void __raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
+static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
{
int overlap_clear = 0, i, disks = sh->disks;
struct dma_async_tx_descriptor *tx = NULL;
put_cpu();
}
-#ifdef CONFIG_MULTICORE_RAID456
-static void async_run_ops(void *param, async_cookie_t cookie)
-{
- struct stripe_head *sh = param;
- unsigned long ops_request = sh->ops.request;
-
- clear_bit_unlock(STRIPE_OPS_REQ_PENDING, &sh->state);
- wake_up(&sh->ops.wait_for_ops);
-
- __raid_run_ops(sh, ops_request);
- release_stripe(sh);
-}
-
-static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
-{
- /* since handle_stripe can be called outside of raid5d context
- * we need to ensure sh->ops.request is de-staged before another
- * request arrives
- */
- wait_event(sh->ops.wait_for_ops,
- !test_and_set_bit_lock(STRIPE_OPS_REQ_PENDING, &sh->state));
- sh->ops.request = ops_request;
-
- atomic_inc(&sh->count);
- async_schedule(async_run_ops, sh);
-}
-#else
-#define raid_run_ops __raid_run_ops
-#endif
-
static int grow_one_stripe(struct r5conf *conf)
{
struct stripe_head *sh;
return 0;
sh->raid_conf = conf;
- #ifdef CONFIG_MULTICORE_RAID456
- init_waitqueue_head(&sh->ops.wait_for_ops);
- #endif
spin_lock_init(&sh->stripe_lock);
break;
nsh->raid_conf = conf;
- #ifdef CONFIG_MULTICORE_RAID456
- init_waitqueue_head(&nsh->ops.wait_for_ops);
- #endif
spin_lock_init(&nsh->stripe_lock);
list_add(&nsh->lru, &newstripes);
/* If this is the first slave, then we need to set the master's hardware
* address to be the same as the slave's. */
- if (bond->dev_addr_from_first)
+ if (bond->slave_cnt == 0 && bond->dev_addr_from_first)
bond_set_dev_addr(bond->dev, slave_dev);
new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
ring->start);
} else {
+ /* Omit CRC. */
+ len -= ETH_FCS_LEN;
+
new_skb = netdev_alloc_skb_ip_align(bgmac->net_dev, len);
if (new_skb) {
skb_put(new_skb, len);
skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET,
new_skb->data,
len);
+ skb_checksum_none_assert(skb);
new_skb->protocol =
eth_type_trans(new_skb, bgmac->net_dev);
netif_receive_skb(new_skb);
tsum = ~csum_fold(csum_add((__force __wsum) csum,
csum_partial(t_header, -fix, 0)));
- return bswab16(csum);
+ return bswab16(tsum);
}
static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
+ if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE)
+ cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full;
}
cmd->maxtxpkt = 0;
ADVERTISED_10000baseKR_Full))
bp->link_params.speed_cap_mask[cfg_idx] |=
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
+
+ if (cmd->advertising & ADVERTISED_20000baseKR2_Full)
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_20G;
}
} else { /* forced speed */
/* advertise the requested speed and duplex if supported */
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED1_MASK,
0x0);
+ if (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) {
+ /* Disable MI_INT interrupt before setting LED4
+ * source to constant off.
+ */
+ if (REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
+ params->port*4) &
+ NIG_MASK_MI_INT) {
+ params->link_flags |=
+ LINK_FLAGS_INT_DISABLED;
+
+ bnx2x_bits_dis(
+ bp,
+ NIG_REG_MASK_INTERRUPT_PORT0 +
+ params->port*4,
+ NIG_MASK_MI_INT);
+ }
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_SIGNAL_MASK,
+ 0x0);
+ }
}
break;
case LED_MODE_ON:
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED1_MASK,
0x20);
+ if (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) {
+ /* Disable MI_INT interrupt before setting LED4
+ * source to constant on.
+ */
+ if (REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
+ params->port*4) &
+ NIG_MASK_MI_INT) {
+ params->link_flags |=
+ LINK_FLAGS_INT_DISABLED;
+
+ bnx2x_bits_dis(
+ bp,
+ NIG_REG_MASK_INTERRUPT_PORT0 +
+ params->port*4,
+ NIG_MASK_MI_INT);
+ }
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_SIGNAL_MASK,
+ 0x20);
+ }
}
break;
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LINK_SIGNAL,
val);
+ if (phy->type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) {
+ /* Restore LED4 source to external link,
+ * and re-enable interrupts.
+ */
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_SIGNAL_MASK,
+ 0x40);
+ if (params->link_flags &
+ LINK_FLAGS_INT_DISABLED) {
+ bnx2x_link_int_enable(params);
+ params->link_flags &=
+ ~LINK_FLAGS_INT_DISABLED;
+ }
+ }
}
break;
}
phy->media_type = ETH_PHY_KR;
phy->flags |= FLAGS_WC_DUAL_MODE;
phy->supported &= (SUPPORTED_20000baseKR2_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
struct bnx2x_phy *phy = ¶ms->phy[INT_PHY];
bnx2x_set_aer_mmd(params, phy);
if ((phy->supported & SUPPORTED_20000baseKR2_Full) &&
- (phy->speed_cap_mask & SPEED_20000))
+ (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G))
bnx2x_check_kr2_wa(params, vars, phy);
bnx2x_check_over_curr(params, vars);
if (vars->rx_tx_asic_rst)
struct bnx2x *bp;
u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
req_flow_ctrl is set to AUTO */
- u16 rsrv1;
+ u16 link_flags;
+#define LINK_FLAGS_INT_DISABLED (1<<0)
u32 lfa_base;
};
struct bufdesc *bdp;
void *bufaddr;
unsigned short status;
- unsigned long flags;
+ unsigned int index;
if (!fep->link) {
/* Link is down or autonegotiation is in progress. */
return NETDEV_TX_BUSY;
}
- spin_lock_irqsave(&fep->hw_lock, flags);
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
* This should not happen, since ndev->tbusy should be set.
*/
printk("%s: tx queue full!.\n", ndev->name);
- spin_unlock_irqrestore(&fep->hw_lock, flags);
return NETDEV_TX_BUSY;
}
* 4-byte boundaries. Use bounce buffers to copy data
* and get it aligned. Ugh.
*/
+ if (fep->bufdesc_ex)
+ index = (struct bufdesc_ex *)bdp -
+ (struct bufdesc_ex *)fep->tx_bd_base;
+ else
+ index = bdp - fep->tx_bd_base;
+
if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
- unsigned int index;
- if (fep->bufdesc_ex)
- index = (struct bufdesc_ex *)bdp -
- (struct bufdesc_ex *)fep->tx_bd_base;
- else
- index = bdp - fep->tx_bd_base;
memcpy(fep->tx_bounce[index], skb->data, skb->len);
bufaddr = fep->tx_bounce[index];
}
swap_buffer(bufaddr, skb->len);
/* Save skb pointer */
- fep->tx_skbuff[fep->skb_cur] = skb;
-
- ndev->stats.tx_bytes += skb->len;
- fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
+ fep->tx_skbuff[index] = skb;
/* Push the data cache so the CPM does not get stale memory
* data.
ebdp->cbd_esc = BD_ENET_TX_INT;
}
}
- /* Trigger transmission start */
- writel(0, fep->hwp + FEC_X_DES_ACTIVE);
-
/* If this was the last BD in the ring, start at the beginning again. */
if (status & BD_ENET_TX_WRAP)
bdp = fep->tx_bd_base;
else
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- if (bdp == fep->dirty_tx) {
- fep->tx_full = 1;
+ fep->cur_tx = bdp;
+
+ if (fep->cur_tx == fep->dirty_tx)
netif_stop_queue(ndev);
- }
- fep->cur_tx = bdp;
+ /* Trigger transmission start */
+ writel(0, fep->hwp + FEC_X_DES_ACTIVE);
skb_tx_timestamp(skb);
- spin_unlock_irqrestore(&fep->hw_lock, flags);
-
return NETDEV_TX_OK;
}
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
- fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
fep->cur_rx = fep->rx_bd_base;
- /* Reset SKB transmit buffers. */
- fep->skb_cur = fep->skb_dirty = 0;
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
if (fep->tx_skbuff[i]) {
dev_kfree_skb_any(fep->tx_skbuff[i]);
struct bufdesc *bdp;
unsigned short status;
struct sk_buff *skb;
+ int index = 0;
fep = netdev_priv(ndev);
- spin_lock(&fep->hw_lock);
bdp = fep->dirty_tx;
+ /* get next bdp of dirty_tx */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ bdp = fep->tx_bd_base;
+ else
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
- if (bdp == fep->cur_tx && fep->tx_full == 0)
+
+ /* current queue is empty */
+ if (bdp == fep->cur_tx)
break;
+ if (fep->bufdesc_ex)
+ index = (struct bufdesc_ex *)bdp -
+ (struct bufdesc_ex *)fep->tx_bd_base;
+ else
+ index = bdp - fep->tx_bd_base;
+
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
bdp->cbd_bufaddr = 0;
- skb = fep->tx_skbuff[fep->skb_dirty];
+ skb = fep->tx_skbuff[index];
+
/* Check for errors. */
if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
BD_ENET_TX_RL | BD_ENET_TX_UN |
/* Free the sk buffer associated with this last transmit */
dev_kfree_skb_any(skb);
- fep->tx_skbuff[fep->skb_dirty] = NULL;
- fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
+ fep->tx_skbuff[index] = NULL;
+
+ fep->dirty_tx = bdp;
/* Update pointer to next buffer descriptor to be transmitted */
if (status & BD_ENET_TX_WRAP)
/* Since we have freed up a buffer, the ring is no longer full
*/
- if (fep->tx_full) {
- fep->tx_full = 0;
+ if (fep->dirty_tx != fep->cur_tx) {
if (netif_queue_stopped(ndev))
netif_wake_queue(ndev);
}
}
- fep->dirty_tx = bdp;
- spin_unlock(&fep->hw_lock);
+ return;
}
int_events = readl(fep->hwp + FEC_IEVENT);
writel(int_events, fep->hwp + FEC_IEVENT);
- if (int_events & FEC_ENET_RXF) {
+ if (int_events & (FEC_ENET_RXF | FEC_ENET_TXF)) {
ret = IRQ_HANDLED;
/* Disable the RX interrupt */
}
}
- /* Transmit OK, or non-fatal error. Update the buffer
- * descriptors. FEC handles all errors, we just discover
- * them as part of the transmit process.
- */
- if (int_events & FEC_ENET_TXF) {
- ret = IRQ_HANDLED;
- fec_enet_tx(ndev);
- }
-
if (int_events & FEC_ENET_MII) {
ret = IRQ_HANDLED;
complete(&fep->mdio_done);
int pkts = fec_enet_rx(ndev, budget);
struct fec_enet_private *fep = netdev_priv(ndev);
+ fec_enet_tx(ndev);
+
if (pkts < budget) {
napi_complete(napi);
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
/* ...and the same for transmit */
bdp = fep->tx_bd_base;
+ fep->cur_tx = bdp;
for (i = 0; i < TX_RING_SIZE; i++) {
/* Initialize the BD for every fragment in the page. */
/* Set the last buffer to wrap */
bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
bdp->cbd_sc |= BD_SC_WRAP;
+ fep->dirty_tx = bdp;
fec_restart(ndev, 0);
unsigned short cbd_sc; /* Control and status info */
unsigned long cbd_bufaddr; /* Buffer address */
};
+#else
+struct bufdesc {
+ unsigned short cbd_sc; /* Control and status info */
+ unsigned short cbd_datlen; /* Data length */
+ unsigned long cbd_bufaddr; /* Buffer address */
+};
+#endif
struct bufdesc_ex {
struct bufdesc desc;
unsigned short res0[4];
};
-#else
-struct bufdesc {
- unsigned short cbd_sc; /* Control and status info */
- unsigned short cbd_datlen; /* Data length */
- unsigned long cbd_bufaddr; /* Buffer address */
-};
-#endif
-
/*
* The following definitions courtesy of commproc.h, which where
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff *tx_skbuff[TX_RING_SIZE];
struct sk_buff *rx_skbuff[RX_RING_SIZE];
- ushort skb_cur;
- ushort skb_dirty;
/* CPM dual port RAM relative addresses */
dma_addr_t bd_dma;
/* The ring entries to be free()ed */
struct bufdesc *dirty_tx;
- uint tx_full;
/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
spinlock_t hw_lock;
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
- rtl_tx_performance_tweak(pdev,
- (0x5 << MAX_READ_REQUEST_SHIFT) | PCI_EXP_DEVCTL_NOSNOOP_EN);
+ if (tp->dev->mtu <= ETH_DATA_LEN) {
+ rtl_tx_performance_tweak(pdev, (0x5 << MAX_READ_REQUEST_SHIFT) |
+ PCI_EXP_DEVCTL_NOSNOOP_EN);
+ }
}
static void rtl_hw_start_8168bef(struct rtl8169_private *tp)
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
rtl_disable_clock_request(pdev);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
RTL_W8(MaxTxPacketSize, TxPacketMax);
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
RTL_W8(MaxTxPacketSize, TxPacketMax);
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
rtl_csi_access_enable_1(tp);
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_ephy_init(tp, e_info_8168e_1, ARRAY_SIZE(e_info_8168e_1));
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_ephy_init(tp, e_info_8168e_2, ARRAY_SIZE(e_info_8168e_2));
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
tx_queue->txd.entries);
}
+ efx_device_detach_sync(efx);
efx_stop_all(efx);
efx_stop_interrupts(efx, true);
efx_start_interrupts(efx, true);
efx_start_all(efx);
+ netif_device_attach(efx->net_dev);
return rc;
rollback:
/* Flush efx_mac_work(), refill_workqueue, monitor_work */
efx_flush_all(efx);
- /* Stop the kernel transmit interface late, so the watchdog
- * timer isn't ticking over the flush */
+ /* Stop the kernel transmit interface. This is only valid if
+ * the device is stopped or detached; otherwise the watchdog
+ * may fire immediately.
+ */
+ WARN_ON(netif_running(efx->net_dev) &&
+ netif_device_present(efx->net_dev));
netif_tx_disable(efx->net_dev);
efx_stop_datapath(efx);
if (new_mtu > EFX_MAX_MTU)
return -EINVAL;
- efx_stop_all(efx);
-
netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu);
+ efx_device_detach_sync(efx);
+ efx_stop_all(efx);
+
mutex_lock(&efx->mac_lock);
net_dev->mtu = new_mtu;
efx->type->reconfigure_mac(efx);
mutex_unlock(&efx->mac_lock);
efx_start_all(efx);
+ netif_device_attach(efx->net_dev);
return 0;
}
* Will be %NULL if the buffer slot is currently free.
* @page: The associated page buffer. Valif iff @flags & %EFX_RX_BUF_PAGE.
* Will be %NULL if the buffer slot is currently free.
+ * @page_offset: Offset within page. Valid iff @flags & %EFX_RX_BUF_PAGE.
* @len: Buffer length, in bytes.
* @flags: Flags for buffer and packet state.
*/
struct sk_buff *skb;
struct page *page;
} u;
- unsigned int len;
+ u16 page_offset;
+ u16 len;
u16 flags;
};
#define EFX_RX_BUF_PAGE 0x0001
static inline unsigned int efx_rx_buf_offset(struct efx_nic *efx,
struct efx_rx_buffer *buf)
{
- /* Offset is always within one page, so we don't need to consider
- * the page order.
- */
- return ((unsigned int) buf->dma_addr & (PAGE_SIZE - 1)) +
- efx->type->rx_buffer_hash_size;
+ return buf->page_offset + efx->type->rx_buffer_hash_size;
}
static inline unsigned int efx_rx_buf_size(struct efx_nic *efx)
{
struct efx_nic *efx = rx_queue->efx;
struct efx_rx_buffer *rx_buf;
struct page *page;
+ unsigned int page_offset;
struct efx_rx_page_state *state;
dma_addr_t dma_addr;
unsigned index, count;
state->dma_addr = dma_addr;
dma_addr += sizeof(struct efx_rx_page_state);
+ page_offset = sizeof(struct efx_rx_page_state);
split:
index = rx_queue->added_count & rx_queue->ptr_mask;
rx_buf = efx_rx_buffer(rx_queue, index);
rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
rx_buf->u.page = page;
+ rx_buf->page_offset = page_offset;
rx_buf->len = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN;
rx_buf->flags = EFX_RX_BUF_PAGE;
++rx_queue->added_count;
/* Use the second half of the page */
get_page(page);
dma_addr += (PAGE_SIZE >> 1);
+ page_offset += (PAGE_SIZE >> 1);
++count;
goto split;
}
}
static void efx_unmap_rx_buffer(struct efx_nic *efx,
- struct efx_rx_buffer *rx_buf)
+ struct efx_rx_buffer *rx_buf,
+ unsigned int used_len)
{
if ((rx_buf->flags & EFX_RX_BUF_PAGE) && rx_buf->u.page) {
struct efx_rx_page_state *state;
state->dma_addr,
efx_rx_buf_size(efx),
DMA_FROM_DEVICE);
+ } else if (used_len) {
+ dma_sync_single_for_cpu(&efx->pci_dev->dev,
+ rx_buf->dma_addr, used_len,
+ DMA_FROM_DEVICE);
}
} else if (!(rx_buf->flags & EFX_RX_BUF_PAGE) && rx_buf->u.skb) {
dma_unmap_single(&efx->pci_dev->dev, rx_buf->dma_addr,
static void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue,
struct efx_rx_buffer *rx_buf)
{
- efx_unmap_rx_buffer(rx_queue->efx, rx_buf);
+ efx_unmap_rx_buffer(rx_queue->efx, rx_buf, 0);
efx_free_rx_buffer(rx_queue->efx, rx_buf);
}
goto out;
}
- /* Release card resources - assumes all RX buffers consumed in-order
- * per RX queue
+ /* Release and/or sync DMA mapping - assumes all RX buffers
+ * consumed in-order per RX queue
*/
- efx_unmap_rx_buffer(efx, rx_buf);
+ efx_unmap_rx_buffer(efx, rx_buf, len);
/* Prefetch nice and early so data will (hopefully) be in cache by
* the time we look at it.
writel(vlan, &priv->host_port_regs->port_vlan);
- for (i = 0; i < 2; i++)
+ for (i = 0; i < priv->data.slaves; i++)
slave_write(priv->slaves + i, vlan, reg);
cpsw_ale_add_vlan(priv->ale, vlan, ALE_ALL_PORTS << port,
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
.name = "Micrel KSZ9021 Gigabit PHY",
- .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
- | SUPPORTED_Asym_Pause),
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
void phy_device_free(struct phy_device *phydev)
{
- kfree(phydev);
+ put_device(&phydev->dev);
}
EXPORT_SYMBOL(phy_device_free);
static void phy_device_release(struct device *dev)
{
- phy_device_free(to_phy_device(dev));
+ kfree(to_phy_device(dev));
}
static struct phy_driver genphy_driver;
there's no driver _already_ loaded. */
request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
+ device_initialize(&dev->dev);
+
return dev;
}
EXPORT_SYMBOL(phy_device_create);
/* Run all of the fixups for this PHY */
phy_scan_fixups(phydev);
- err = device_register(&phydev->dev);
+ err = device_add(&phydev->dev);
if (err) {
- pr_err("phy %d failed to register\n", phydev->addr);
+ pr_err("PHY %d failed to add\n", phydev->addr);
goto out;
}
This driver creates an interface named "ethX", where X depends on
what other networking devices you have in use.
+config USB_NET_AX88179_178A
+ tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+ depends on USB_USBNET
+ select CRC32
+ select PHYLIB
+ default y
+ help
+ This option adds support for ASIX AX88179 based USB 3.0/2.0
+ to Gigabit Ethernet adapters.
+
+ This driver should work with at least the following devices:
+ * ASIX AX88179
+ * ASIX AX88178A
+ * Sitcomm LN-032
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use.
+
config USB_NET_CDCETHER
tristate "CDC Ethernet support (smart devices such as cable modems)"
depends on USB_USBNET
obj-$(CONFIG_USB_HSO) += hso.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
asix-y := asix_devices.o asix_common.o ax88172a.o
+obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
.tx_fixup = asix_tx_fixup,
};
+/*
+ * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
+ * no-name packaging.
+ * USB device strings are:
+ * 1: Manufacturer: USBLINK
+ * 2: Product: HG20F9 USB2.0
+ * 3: Serial: 000003
+ * Appears to be compatible with Asix 88772B.
+ */
+static const struct driver_info hg20f9_info = {
+ .description = "HG20F9 USB 2.0 Ethernet",
+ .bind = ax88772_bind,
+ .unbind = ax88772_unbind,
+ .status = asix_status,
+ .link_reset = ax88772_link_reset,
+ .reset = ax88772_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+ FLAG_MULTI_PACKET,
+ .rx_fixup = asix_rx_fixup_common,
+ .tx_fixup = asix_tx_fixup,
+ .data = FLAG_EEPROM_MAC,
+};
+
extern const struct driver_info ax88172a_info;
static const struct usb_device_id products [] = {
/* ASIX 88172a demo board */
USB_DEVICE(0x0b95, 0x172a),
.driver_info = (unsigned long) &ax88172a_info,
+}, {
+ /*
+ * USBLINK HG20F9 "USB 2.0 LAN"
+ * Appears to have gazumped Linksys's manufacturer ID but
+ * doesn't (yet) conflict with any known Linksys product.
+ */
+ USB_DEVICE(0x066b, 0x20f9),
+ .driver_info = (unsigned long) &hg20f9_info,
},
{ }, // END
};
--- /dev/null
+/*
+ * ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet Devices
+ *
+ * Copyright (C) 2011-2013 ASIX
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+
+#define AX88179_PHY_ID 0x03
+#define AX_EEPROM_LEN 0x100
+#define AX88179_EEPROM_MAGIC 0x17900b95
+#define AX_MCAST_FLTSIZE 8
+#define AX_MAX_MCAST 64
+#define AX_INT_PPLS_LINK ((u32)BIT(16))
+#define AX_RXHDR_L4_TYPE_MASK 0x1c
+#define AX_RXHDR_L4_TYPE_UDP 4
+#define AX_RXHDR_L4_TYPE_TCP 16
+#define AX_RXHDR_L3CSUM_ERR 2
+#define AX_RXHDR_L4CSUM_ERR 1
+#define AX_RXHDR_CRC_ERR ((u32)BIT(31))
+#define AX_RXHDR_DROP_ERR ((u32)BIT(30))
+#define AX_ACCESS_MAC 0x01
+#define AX_ACCESS_PHY 0x02
+#define AX_ACCESS_EEPROM 0x04
+#define AX_ACCESS_EFUS 0x05
+#define AX_PAUSE_WATERLVL_HIGH 0x54
+#define AX_PAUSE_WATERLVL_LOW 0x55
+
+#define PHYSICAL_LINK_STATUS 0x02
+ #define AX_USB_SS 0x04
+ #define AX_USB_HS 0x02
+
+#define GENERAL_STATUS 0x03
+/* Check AX88179 version. UA1:Bit2 = 0, UA2:Bit2 = 1 */
+ #define AX_SECLD 0x04
+
+#define AX_SROM_ADDR 0x07
+#define AX_SROM_CMD 0x0a
+ #define EEP_RD 0x04
+ #define EEP_BUSY 0x10
+
+#define AX_SROM_DATA_LOW 0x08
+#define AX_SROM_DATA_HIGH 0x09
+
+#define AX_RX_CTL 0x0b
+ #define AX_RX_CTL_DROPCRCERR 0x0100
+ #define AX_RX_CTL_IPE 0x0200
+ #define AX_RX_CTL_START 0x0080
+ #define AX_RX_CTL_AP 0x0020
+ #define AX_RX_CTL_AM 0x0010
+ #define AX_RX_CTL_AB 0x0008
+ #define AX_RX_CTL_AMALL 0x0002
+ #define AX_RX_CTL_PRO 0x0001
+ #define AX_RX_CTL_STOP 0x0000
+
+#define AX_NODE_ID 0x10
+#define AX_MULFLTARY 0x16
+
+#define AX_MEDIUM_STATUS_MODE 0x22
+ #define AX_MEDIUM_GIGAMODE 0x01
+ #define AX_MEDIUM_FULL_DUPLEX 0x02
+ #define AX_MEDIUM_ALWAYS_ONE 0x04
+ #define AX_MEDIUM_EN_125MHZ 0x08
+ #define AX_MEDIUM_RXFLOW_CTRLEN 0x10
+ #define AX_MEDIUM_TXFLOW_CTRLEN 0x20
+ #define AX_MEDIUM_RECEIVE_EN 0x100
+ #define AX_MEDIUM_PS 0x200
+ #define AX_MEDIUM_JUMBO_EN 0x8040
+
+#define AX_MONITOR_MOD 0x24
+ #define AX_MONITOR_MODE_RWLC 0x02
+ #define AX_MONITOR_MODE_RWMP 0x04
+ #define AX_MONITOR_MODE_PMEPOL 0x20
+ #define AX_MONITOR_MODE_PMETYPE 0x40
+
+#define AX_GPIO_CTRL 0x25
+ #define AX_GPIO_CTRL_GPIO3EN 0x80
+ #define AX_GPIO_CTRL_GPIO2EN 0x40
+ #define AX_GPIO_CTRL_GPIO1EN 0x20
+
+#define AX_PHYPWR_RSTCTL 0x26
+ #define AX_PHYPWR_RSTCTL_BZ 0x0010
+ #define AX_PHYPWR_RSTCTL_IPRL 0x0020
+ #define AX_PHYPWR_RSTCTL_AT 0x1000
+
+#define AX_RX_BULKIN_QCTRL 0x2e
+#define AX_CLK_SELECT 0x33
+ #define AX_CLK_SELECT_BCS 0x01
+ #define AX_CLK_SELECT_ACS 0x02
+ #define AX_CLK_SELECT_ULR 0x08
+
+#define AX_RXCOE_CTL 0x34
+ #define AX_RXCOE_IP 0x01
+ #define AX_RXCOE_TCP 0x02
+ #define AX_RXCOE_UDP 0x04
+ #define AX_RXCOE_TCPV6 0x20
+ #define AX_RXCOE_UDPV6 0x40
+
+#define AX_TXCOE_CTL 0x35
+ #define AX_TXCOE_IP 0x01
+ #define AX_TXCOE_TCP 0x02
+ #define AX_TXCOE_UDP 0x04
+ #define AX_TXCOE_TCPV6 0x20
+ #define AX_TXCOE_UDPV6 0x40
+
+#define AX_LEDCTRL 0x73
+
+#define GMII_PHY_PHYSR 0x11
+ #define GMII_PHY_PHYSR_SMASK 0xc000
+ #define GMII_PHY_PHYSR_GIGA 0x8000
+ #define GMII_PHY_PHYSR_100 0x4000
+ #define GMII_PHY_PHYSR_FULL 0x2000
+ #define GMII_PHY_PHYSR_LINK 0x400
+
+#define GMII_LED_ACT 0x1a
+ #define GMII_LED_ACTIVE_MASK 0xff8f
+ #define GMII_LED0_ACTIVE BIT(4)
+ #define GMII_LED1_ACTIVE BIT(5)
+ #define GMII_LED2_ACTIVE BIT(6)
+
+#define GMII_LED_LINK 0x1c
+ #define GMII_LED_LINK_MASK 0xf888
+ #define GMII_LED0_LINK_10 BIT(0)
+ #define GMII_LED0_LINK_100 BIT(1)
+ #define GMII_LED0_LINK_1000 BIT(2)
+ #define GMII_LED1_LINK_10 BIT(4)
+ #define GMII_LED1_LINK_100 BIT(5)
+ #define GMII_LED1_LINK_1000 BIT(6)
+ #define GMII_LED2_LINK_10 BIT(8)
+ #define GMII_LED2_LINK_100 BIT(9)
+ #define GMII_LED2_LINK_1000 BIT(10)
+ #define LED0_ACTIVE BIT(0)
+ #define LED0_LINK_10 BIT(1)
+ #define LED0_LINK_100 BIT(2)
+ #define LED0_LINK_1000 BIT(3)
+ #define LED0_FD BIT(4)
+ #define LED0_USB3_MASK 0x001f
+ #define LED1_ACTIVE BIT(5)
+ #define LED1_LINK_10 BIT(6)
+ #define LED1_LINK_100 BIT(7)
+ #define LED1_LINK_1000 BIT(8)
+ #define LED1_FD BIT(9)
+ #define LED1_USB3_MASK 0x03e0
+ #define LED2_ACTIVE BIT(10)
+ #define LED2_LINK_1000 BIT(13)
+ #define LED2_LINK_100 BIT(12)
+ #define LED2_LINK_10 BIT(11)
+ #define LED2_FD BIT(14)
+ #define LED_VALID BIT(15)
+ #define LED2_USB3_MASK 0x7c00
+
+#define GMII_PHYPAGE 0x1e
+#define GMII_PHY_PAGE_SELECT 0x1f
+ #define GMII_PHY_PGSEL_EXT 0x0007
+ #define GMII_PHY_PGSEL_PAGE0 0x0000
+
+struct ax88179_data {
+ u16 rxctl;
+ u16 reserved;
+};
+
+struct ax88179_int_data {
+ __le32 intdata1;
+ __le32 intdata2;
+};
+
+static const struct {
+ unsigned char ctrl, timer_l, timer_h, size, ifg;
+} AX88179_BULKIN_SIZE[] = {
+ {7, 0x4f, 0, 0x12, 0xff},
+ {7, 0x20, 3, 0x16, 0xff},
+ {7, 0xae, 7, 0x18, 0xff},
+ {7, 0xcc, 0x4c, 0x18, 8},
+};
+
+static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data, int in_pm)
+{
+ int ret;
+ int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+ BUG_ON(!dev);
+
+ if (!in_pm)
+ fn = usbnet_read_cmd;
+ else
+ fn = usbnet_read_cmd_nopm;
+
+ ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, index, data, size);
+
+ if (unlikely(ret < 0))
+ netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+ index, ret);
+
+ return ret;
+}
+
+static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data, int in_pm)
+{
+ int ret;
+ int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+ BUG_ON(!dev);
+
+ if (!in_pm)
+ fn = usbnet_write_cmd;
+ else
+ fn = usbnet_write_cmd_nopm;
+
+ ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, index, data, size);
+
+ if (unlikely(ret < 0))
+ netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+ index, ret);
+
+ return ret;
+}
+
+static void ax88179_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+ u16 index, u16 size, void *data)
+{
+ u16 buf;
+
+ if (2 == size) {
+ buf = *((u16 *)data);
+ cpu_to_le16s(&buf);
+ usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index, &buf,
+ size);
+ } else {
+ usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index, data,
+ size);
+ }
+}
+
+static int ax88179_read_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+ u16 index, u16 size, void *data)
+{
+ int ret;
+
+ if (2 == size) {
+ u16 buf;
+ ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
+ le16_to_cpus(&buf);
+ *((u16 *)data) = buf;
+ } else if (4 == size) {
+ u32 buf;
+ ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
+ le32_to_cpus(&buf);
+ *((u32 *)data) = buf;
+ } else {
+ ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 1);
+ }
+
+ return ret;
+}
+
+static int ax88179_write_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+ u16 index, u16 size, void *data)
+{
+ int ret;
+
+ if (2 == size) {
+ u16 buf;
+ buf = *((u16 *)data);
+ cpu_to_le16s(&buf);
+ ret = __ax88179_write_cmd(dev, cmd, value, index,
+ size, &buf, 1);
+ } else {
+ ret = __ax88179_write_cmd(dev, cmd, value, index,
+ size, data, 1);
+ }
+
+ return ret;
+}
+
+static int ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ int ret;
+
+ if (2 == size) {
+ u16 buf;
+ ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
+ le16_to_cpus(&buf);
+ *((u16 *)data) = buf;
+ } else if (4 == size) {
+ u32 buf;
+ ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
+ le32_to_cpus(&buf);
+ *((u32 *)data) = buf;
+ } else {
+ ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 0);
+ }
+
+ return ret;
+}
+
+static int ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ int ret;
+
+ if (2 == size) {
+ u16 buf;
+ buf = *((u16 *)data);
+ cpu_to_le16s(&buf);
+ ret = __ax88179_write_cmd(dev, cmd, value, index,
+ size, &buf, 0);
+ } else {
+ ret = __ax88179_write_cmd(dev, cmd, value, index,
+ size, data, 0);
+ }
+
+ return ret;
+}
+
+static void ax88179_status(struct usbnet *dev, struct urb *urb)
+{
+ struct ax88179_int_data *event;
+ u32 link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ le32_to_cpus((void *)&event->intdata1);
+
+ link = (((__force u32)event->intdata1) & AX_INT_PPLS_LINK) >> 16;
+
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link)
+ usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+ else
+ netif_carrier_off(dev->net);
+
+ netdev_info(dev->net, "ax88179 - Link status is: %d\n", link);
+ }
+}
+
+static int ax88179_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res;
+
+ ax88179_read_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+ return res;
+}
+
+static void ax88179_mdio_write(struct net_device *netdev, int phy_id, int loc,
+ int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res = (u16) val;
+
+ ax88179_write_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+}
+
+static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ u16 tmp16;
+ u8 tmp8;
+
+ usbnet_suspend(intf, message);
+
+ /* Disable RX path */
+ ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+ tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+
+ /* Force bulk-in zero length */
+ ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+ 2, 2, &tmp16);
+
+ tmp16 |= AX_PHYPWR_RSTCTL_BZ | AX_PHYPWR_RSTCTL_IPRL;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+ 2, 2, &tmp16);
+
+ /* change clock */
+ tmp8 = 0;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+ /* Configure RX control register => stop operation */
+ tmp16 = AX_RX_CTL_STOP;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+ return 0;
+}
+
+/* This function is used to enable the autodetach function. */
+/* This function is determined by offset 0x43 of EEPROM */
+static int ax88179_auto_detach(struct usbnet *dev, int in_pm)
+{
+ u16 tmp16;
+ u8 tmp8;
+ int (*fnr)(struct usbnet *, u8, u16, u16, u16, void *);
+ int (*fnw)(struct usbnet *, u8, u16, u16, u16, void *);
+
+ if (!in_pm) {
+ fnr = ax88179_read_cmd;
+ fnw = ax88179_write_cmd;
+ } else {
+ fnr = ax88179_read_cmd_nopm;
+ fnw = ax88179_write_cmd_nopm;
+ }
+
+ if (fnr(dev, AX_ACCESS_EEPROM, 0x43, 1, 2, &tmp16) < 0)
+ return 0;
+
+ if ((tmp16 == 0xFFFF) || (!(tmp16 & 0x0100)))
+ return 0;
+
+ /* Enable Auto Detach bit */
+ tmp8 = 0;
+ fnr(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+ tmp8 |= AX_CLK_SELECT_ULR;
+ fnw(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+ fnr(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+ tmp16 |= AX_PHYPWR_RSTCTL_AT;
+ fnw(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+
+ return 0;
+}
+
+static int ax88179_resume(struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ u16 tmp16;
+ u8 tmp8;
+
+ netif_carrier_off(dev->net);
+
+ /* Power up ethernet PHY */
+ tmp16 = 0;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+ 2, 2, &tmp16);
+ udelay(1000);
+
+ tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+ 2, 2, &tmp16);
+ msleep(200);
+
+ /* Ethernet PHY Auto Detach*/
+ ax88179_auto_detach(dev, 1);
+
+ /* Enable clock */
+ ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+ tmp8 |= AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+ msleep(100);
+
+ /* Configure RX control register => start operation */
+ tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+ AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+ ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+ return usbnet_resume(intf);
+}
+
+static void
+ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+ 1, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & AX_MONITOR_MODE_RWLC)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & AX_MONITOR_MODE_RWMP)
+ wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= AX_MONITOR_MODE_RWLC;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= AX_MONITOR_MODE_RWMP;
+
+ if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+ 1, 1, &opt) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ax88179_get_eeprom_len(struct net_device *net)
+{
+ return AX_EEPROM_LEN;
+}
+
+static int
+ax88179_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int i, ret;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = AX88179_EEPROM_MAGIC;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+ GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ /* ax88179/178A returns 2 bytes from eeprom on read */
+ for (i = first_word; i <= last_word; i++) {
+ ret = __ax88179_read_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
+ &eeprom_buff[i - first_word],
+ 0);
+ if (ret < 0) {
+ kfree(eeprom_buff);
+ return -EIO;
+ }
+ }
+
+ memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+ kfree(eeprom_buff);
+ return 0;
+}
+
+static int ax88179_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+ return mii_ethtool_gset(&dev->mii, cmd);
+}
+
+static int ax88179_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+ return mii_ethtool_sset(&dev->mii, cmd);
+}
+
+
+static int ax88179_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops ax88179_ethtool_ops = {
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax88179_get_wol,
+ .set_wol = ax88179_set_wol,
+ .get_eeprom_len = ax88179_get_eeprom_len,
+ .get_eeprom = ax88179_get_eeprom,
+ .get_settings = ax88179_get_settings,
+ .set_settings = ax88179_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static void ax88179_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct ax88179_data *data = (struct ax88179_data *)dev->data;
+ u8 *m_filter = ((u8 *)dev->data) + 12;
+
+ data->rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_IPE);
+
+ if (net->flags & IFF_PROMISC) {
+ data->rxctl |= AX_RX_CTL_PRO;
+ } else if (net->flags & IFF_ALLMULTI ||
+ netdev_mc_count(net) > AX_MAX_MCAST) {
+ data->rxctl |= AX_RX_CTL_AMALL;
+ } else if (netdev_mc_empty(net)) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data for our 8 byte filter buffer
+ * to avoid allocating memory that is tricky to free later
+ */
+ u32 crc_bits;
+ struct netdev_hw_addr *ha;
+
+ memset(m_filter, 0, AX_MCAST_FLTSIZE);
+
+ netdev_for_each_mc_addr(ha, net) {
+ crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+ *(m_filter + (crc_bits >> 3)) |= (1 << (crc_bits & 7));
+ }
+
+ ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_MULFLTARY,
+ AX_MCAST_FLTSIZE, AX_MCAST_FLTSIZE,
+ m_filter);
+
+ data->rxctl |= AX_RX_CTL_AM;
+ }
+
+ ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_RX_CTL,
+ 2, 2, &data->rxctl);
+}
+
+static int
+ax88179_set_features(struct net_device *net, netdev_features_t features)
+{
+ u8 tmp;
+ struct usbnet *dev = netdev_priv(net);
+ netdev_features_t changed = net->features ^ features;
+
+ if (changed & NETIF_F_IP_CSUM) {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+ tmp ^= AX_TXCOE_TCP | AX_TXCOE_UDP;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+ }
+
+ if (changed & NETIF_F_IPV6_CSUM) {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+ tmp ^= AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+ }
+
+ if (changed & NETIF_F_RXCSUM) {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+ tmp ^= AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+ AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+ }
+
+ return 0;
+}
+
+static int ax88179_change_mtu(struct net_device *net, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 tmp16;
+
+ if (new_mtu <= 0 || new_mtu > 4088)
+ return -EINVAL;
+
+ net->mtu = new_mtu;
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+
+ if (net->mtu > 1500) {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+ tmp16 |= AX_MEDIUM_JUMBO_EN;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+ } else {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+ tmp16 &= ~AX_MEDIUM_JUMBO_EN;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+ }
+
+ return 0;
+}
+
+static int ax88179_set_mac_addr(struct net_device *net, void *p)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sockaddr *addr = p;
+
+ if (netif_running(net))
+ return -EBUSY;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+ /* Set the MAC address */
+ return ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+ ETH_ALEN, net->dev_addr);
+}
+
+static const struct net_device_ops ax88179_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = ax88179_change_mtu,
+ .ndo_set_mac_address = ax88179_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = ax88179_ioctl,
+ .ndo_set_rx_mode = ax88179_set_multicast,
+ .ndo_set_features = ax88179_set_features,
+};
+
+static int ax88179_check_eeprom(struct usbnet *dev)
+{
+ u8 i, buf, eeprom[20];
+ u16 csum, delay = HZ / 10;
+ unsigned long jtimeout;
+
+ /* Read EEPROM content */
+ for (i = 0; i < 6; i++) {
+ buf = i;
+ if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+ 1, 1, &buf) < 0)
+ return -EINVAL;
+
+ buf = EEP_RD;
+ if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+ 1, 1, &buf) < 0)
+ return -EINVAL;
+
+ jtimeout = jiffies + delay;
+ do {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+ 1, 1, &buf);
+
+ if (time_after(jiffies, jtimeout))
+ return -EINVAL;
+
+ } while (buf & EEP_BUSY);
+
+ __ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+ 2, 2, &eeprom[i * 2], 0);
+
+ if ((i == 0) && (eeprom[0] == 0xFF))
+ return -EINVAL;
+ }
+
+ csum = eeprom[6] + eeprom[7] + eeprom[8] + eeprom[9];
+ csum = (csum >> 8) + (csum & 0xff);
+ if ((csum + eeprom[10]) != 0xff)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ax88179_check_efuse(struct usbnet *dev, u16 *ledmode)
+{
+ u8 i;
+ u8 efuse[64];
+ u16 csum = 0;
+
+ if (ax88179_read_cmd(dev, AX_ACCESS_EFUS, 0, 64, 64, efuse) < 0)
+ return -EINVAL;
+
+ if (*efuse == 0xFF)
+ return -EINVAL;
+
+ for (i = 0; i < 64; i++)
+ csum = csum + efuse[i];
+
+ while (csum > 255)
+ csum = (csum & 0x00FF) + ((csum >> 8) & 0x00FF);
+
+ if (csum != 0xFF)
+ return -EINVAL;
+
+ *ledmode = (efuse[51] << 8) | efuse[52];
+
+ return 0;
+}
+
+static int ax88179_convert_old_led(struct usbnet *dev, u16 *ledvalue)
+{
+ u16 led;
+
+ /* Loaded the old eFuse LED Mode */
+ if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM, 0x3C, 1, 2, &led) < 0)
+ return -EINVAL;
+
+ led >>= 8;
+ switch (led) {
+ case 0xFF:
+ led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+ LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+ LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+ break;
+ case 0xFE:
+ led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 | LED_VALID;
+ break;
+ case 0xFD:
+ led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 |
+ LED2_LINK_10 | LED_VALID;
+ break;
+ case 0xFC:
+ led = LED0_ACTIVE | LED1_ACTIVE | LED1_LINK_1000 | LED2_ACTIVE |
+ LED2_LINK_100 | LED2_LINK_10 | LED_VALID;
+ break;
+ default:
+ led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+ LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+ LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+ break;
+ }
+
+ *ledvalue = led;
+
+ return 0;
+}
+
+static int ax88179_led_setting(struct usbnet *dev)
+{
+ u8 ledfd, value = 0;
+ u16 tmp, ledact, ledlink, ledvalue = 0, delay = HZ / 10;
+ unsigned long jtimeout;
+
+ /* Check AX88179 version. UA1 or UA2*/
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, GENERAL_STATUS, 1, 1, &value);
+
+ if (!(value & AX_SECLD)) { /* UA1 */
+ value = AX_GPIO_CTRL_GPIO3EN | AX_GPIO_CTRL_GPIO2EN |
+ AX_GPIO_CTRL_GPIO1EN;
+ if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_GPIO_CTRL,
+ 1, 1, &value) < 0)
+ return -EINVAL;
+ }
+
+ /* Check EEPROM */
+ if (!ax88179_check_eeprom(dev)) {
+ value = 0x42;
+ if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+ 1, 1, &value) < 0)
+ return -EINVAL;
+
+ value = EEP_RD;
+ if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+ 1, 1, &value) < 0)
+ return -EINVAL;
+
+ jtimeout = jiffies + delay;
+ do {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+ 1, 1, &value);
+
+ if (time_after(jiffies, jtimeout))
+ return -EINVAL;
+
+ } while (value & EEP_BUSY);
+
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_HIGH,
+ 1, 1, &value);
+ ledvalue = (value << 8);
+
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+ 1, 1, &value);
+ ledvalue |= value;
+
+ /* load internal ROM for defaule setting */
+ if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+ ax88179_convert_old_led(dev, &ledvalue);
+
+ } else if (!ax88179_check_efuse(dev, &ledvalue)) {
+ if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+ ax88179_convert_old_led(dev, &ledvalue);
+ } else {
+ ax88179_convert_old_led(dev, &ledvalue);
+ }
+
+ tmp = GMII_PHY_PGSEL_EXT;
+ ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+ tmp = 0x2c;
+ ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_PHYPAGE, 2, &tmp);
+
+ ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_LED_ACT, 2, &ledact);
+
+ ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_LED_LINK, 2, &ledlink);
+
+ ledact &= GMII_LED_ACTIVE_MASK;
+ ledlink &= GMII_LED_LINK_MASK;
+
+ if (ledvalue & LED0_ACTIVE)
+ ledact |= GMII_LED0_ACTIVE;
+
+ if (ledvalue & LED1_ACTIVE)
+ ledact |= GMII_LED1_ACTIVE;
+
+ if (ledvalue & LED2_ACTIVE)
+ ledact |= GMII_LED2_ACTIVE;
+
+ if (ledvalue & LED0_LINK_10)
+ ledlink |= GMII_LED0_LINK_10;
+
+ if (ledvalue & LED1_LINK_10)
+ ledlink |= GMII_LED1_LINK_10;
+
+ if (ledvalue & LED2_LINK_10)
+ ledlink |= GMII_LED2_LINK_10;
+
+ if (ledvalue & LED0_LINK_100)
+ ledlink |= GMII_LED0_LINK_100;
+
+ if (ledvalue & LED1_LINK_100)
+ ledlink |= GMII_LED1_LINK_100;
+
+ if (ledvalue & LED2_LINK_100)
+ ledlink |= GMII_LED2_LINK_100;
+
+ if (ledvalue & LED0_LINK_1000)
+ ledlink |= GMII_LED0_LINK_1000;
+
+ if (ledvalue & LED1_LINK_1000)
+ ledlink |= GMII_LED1_LINK_1000;
+
+ if (ledvalue & LED2_LINK_1000)
+ ledlink |= GMII_LED2_LINK_1000;
+
+ tmp = ledact;
+ ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_LED_ACT, 2, &tmp);
+
+ tmp = ledlink;
+ ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_LED_LINK, 2, &tmp);
+
+ tmp = GMII_PHY_PGSEL_PAGE0;
+ ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+ /* LED full duplex setting */
+ ledfd = 0;
+ if (ledvalue & LED0_FD)
+ ledfd |= 0x01;
+ else if ((ledvalue & LED0_USB3_MASK) == 0)
+ ledfd |= 0x02;
+
+ if (ledvalue & LED1_FD)
+ ledfd |= 0x04;
+ else if ((ledvalue & LED1_USB3_MASK) == 0)
+ ledfd |= 0x08;
+
+ if (ledvalue & LED2_FD)
+ ledfd |= 0x10;
+ else if ((ledvalue & LED2_USB3_MASK) == 0)
+ ledfd |= 0x20;
+
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_LEDCTRL, 1, 1, &ledfd);
+
+ return 0;
+}
+
+static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 buf[5];
+ u16 *tmp16;
+ u8 *tmp;
+ struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+
+ usbnet_get_endpoints(dev, intf);
+
+ tmp16 = (u16 *)buf;
+ tmp = (u8 *)buf;
+
+ memset(ax179_data, 0, sizeof(*ax179_data));
+
+ /* Power up ethernet PHY */
+ *tmp16 = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+ *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+ msleep(200);
+
+ *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+ msleep(100);
+
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+ ETH_ALEN, dev->net->dev_addr);
+ memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+ /* RX bulk configuration */
+ memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+ dev->rx_urb_size = 1024 * 20;
+
+ *tmp = 0x34;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+ *tmp = 0x52;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+ 1, 1, tmp);
+
+ dev->net->netdev_ops = &ax88179_netdev_ops;
+ dev->net->ethtool_ops = &ax88179_ethtool_ops;
+ dev->net->needed_headroom = 8;
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax88179_mdio_read;
+ dev->mii.mdio_write = ax88179_mdio_write;
+ dev->mii.phy_id_mask = 0xff;
+ dev->mii.reg_num_mask = 0xff;
+ dev->mii.phy_id = 0x03;
+ dev->mii.supports_gmii = 1;
+
+ dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ /* Enable checksum offload */
+ *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+ AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+ *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+ AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+ /* Configure RX control register => start operation */
+ *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+ AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+ *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+ AX_MONITOR_MODE_RWMP;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+ /* Configure default medium type => giga */
+ *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+ AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
+ AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, tmp16);
+
+ ax88179_led_setting(dev);
+
+ /* Restart autoneg */
+ mii_nway_restart(&dev->mii);
+
+ netif_carrier_off(dev->net);
+
+ return 0;
+}
+
+static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u16 tmp16;
+
+ /* Configure RX control register => stop operation */
+ tmp16 = AX_RX_CTL_STOP;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+ tmp16 = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
+
+ /* Power down ethernet PHY */
+ tmp16 = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+}
+
+static void
+ax88179_rx_checksum(struct sk_buff *skb, u32 *pkt_hdr)
+{
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* checksum error bit is set */
+ if ((*pkt_hdr & AX_RXHDR_L3CSUM_ERR) ||
+ (*pkt_hdr & AX_RXHDR_L4CSUM_ERR))
+ return;
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_TCP) ||
+ ((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_UDP))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct sk_buff *ax_skb;
+ int pkt_cnt;
+ u32 rx_hdr;
+ u16 hdr_off;
+ u32 *pkt_hdr;
+
+ skb_trim(skb, skb->len - 4);
+ memcpy(&rx_hdr, skb_tail_pointer(skb), 4);
+ le32_to_cpus(&rx_hdr);
+
+ pkt_cnt = (u16)rx_hdr;
+ hdr_off = (u16)(rx_hdr >> 16);
+ pkt_hdr = (u32 *)(skb->data + hdr_off);
+
+ while (pkt_cnt--) {
+ u16 pkt_len;
+
+ le32_to_cpus(pkt_hdr);
+ pkt_len = (*pkt_hdr >> 16) & 0x1fff;
+
+ /* Check CRC or runt packet */
+ if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
+ (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
+ skb_pull(skb, (pkt_len + 7) & 0xFFF8);
+ pkt_hdr++;
+ continue;
+ }
+
+ if (pkt_cnt == 0) {
+ /* Skip IP alignment psudo header */
+ skb_pull(skb, 2);
+ skb->len = pkt_len;
+ skb_set_tail_pointer(skb, pkt_len);
+ skb->truesize = pkt_len + sizeof(struct sk_buff);
+ ax88179_rx_checksum(skb, pkt_hdr);
+ return 1;
+ }
+
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
+ ax_skb->len = pkt_len;
+ ax_skb->data = skb->data + 2;
+ skb_set_tail_pointer(ax_skb, pkt_len);
+ ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
+ ax88179_rx_checksum(ax_skb, pkt_hdr);
+ usbnet_skb_return(dev, ax_skb);
+ } else {
+ return 0;
+ }
+
+ skb_pull(skb, (pkt_len + 7) & 0xFFF8);
+ pkt_hdr++;
+ }
+ return 1;
+}
+
+static struct sk_buff *
+ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ u32 tx_hdr1, tx_hdr2;
+ int frame_size = dev->maxpacket;
+ int mss = skb_shinfo(skb)->gso_size;
+ int headroom;
+ int tailroom;
+
+ tx_hdr1 = skb->len;
+ tx_hdr2 = mss;
+ if (((skb->len + 8) % frame_size) == 0)
+ tx_hdr2 |= 0x80008000; /* Enable padding */
+
+ skb_linearize(skb);
+ headroom = skb_headroom(skb);
+ tailroom = skb_tailroom(skb);
+
+ if (!skb_header_cloned(skb) &&
+ !skb_cloned(skb) &&
+ (headroom + tailroom) >= 8) {
+ if (headroom < 8) {
+ skb->data = memmove(skb->head + 8, skb->data, skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ }
+ } else {
+ struct sk_buff *skb2;
+
+ skb2 = skb_copy_expand(skb, 8, 0, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ cpu_to_le32s(&tx_hdr2);
+ skb_copy_to_linear_data(skb, &tx_hdr2, 4);
+
+ skb_push(skb, 4);
+ cpu_to_le32s(&tx_hdr1);
+ skb_copy_to_linear_data(skb, &tx_hdr1, 4);
+
+ return skb;
+}
+
+static int ax88179_link_reset(struct usbnet *dev)
+{
+ struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+ u8 tmp[5], link_sts;
+ u16 mode, tmp16, delay = HZ / 10;
+ u32 tmp32 = 0x40000000;
+ unsigned long jtimeout;
+
+ jtimeout = jiffies + delay;
+ while (tmp32 & 0x40000000) {
+ mode = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &mode);
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2,
+ &ax179_data->rxctl);
+
+ /*link up, check the usb device control TX FIFO full or empty*/
+ ax88179_read_cmd(dev, 0x81, 0x8c, 0, 4, &tmp32);
+
+ if (time_after(jiffies, jtimeout))
+ return 0;
+ }
+
+ mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+ AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE;
+
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
+ 1, 1, &link_sts);
+
+ ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+ GMII_PHY_PHYSR, 2, &tmp16);
+
+ if (!(tmp16 & GMII_PHY_PHYSR_LINK)) {
+ return 0;
+ } else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+ mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ;
+ if (dev->net->mtu > 1500)
+ mode |= AX_MEDIUM_JUMBO_EN;
+
+ if (link_sts & AX_USB_SS)
+ memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+ else if (link_sts & AX_USB_HS)
+ memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
+ else
+ memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+ } else if (GMII_PHY_PHYSR_100 == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+ mode |= AX_MEDIUM_PS;
+
+ if (link_sts & (AX_USB_SS | AX_USB_HS))
+ memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
+ else
+ memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+ } else {
+ memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+ }
+
+ /* RX bulk configuration */
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+ dev->rx_urb_size = (1024 * (tmp[3] + 2));
+
+ if (tmp16 & GMII_PHY_PHYSR_FULL)
+ mode |= AX_MEDIUM_FULL_DUPLEX;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &mode);
+
+ netif_carrier_on(dev->net);
+
+ return 0;
+}
+
+static int ax88179_reset(struct usbnet *dev)
+{
+ u8 buf[5];
+ u16 *tmp16;
+ u8 *tmp;
+
+ tmp16 = (u16 *)buf;
+ tmp = (u8 *)buf;
+
+ /* Power up ethernet PHY */
+ *tmp16 = 0;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+
+ *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+ msleep(200);
+
+ *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+ msleep(100);
+
+ /* Ethernet PHY Auto Detach*/
+ ax88179_auto_detach(dev, 0);
+
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN,
+ dev->net->dev_addr);
+ memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+ /* RX bulk configuration */
+ memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+ dev->rx_urb_size = 1024 * 20;
+
+ *tmp = 0x34;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+ *tmp = 0x52;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+ 1, 1, tmp);
+
+ dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+ /* Enable checksum offload */
+ *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+ AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+ *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+ AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+ /* Configure RX control register => start operation */
+ *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+ AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+ *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+ AX_MONITOR_MODE_RWMP;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+ /* Configure default medium type => giga */
+ *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+ AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
+ AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, tmp16);
+
+ ax88179_led_setting(dev);
+
+ /* Restart autoneg */
+ mii_nway_restart(&dev->mii);
+
+ netif_carrier_off(dev->net);
+
+ return 0;
+}
+
+static int ax88179_stop(struct usbnet *dev)
+{
+ u16 tmp16;
+
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+ tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+ 2, 2, &tmp16);
+
+ return 0;
+}
+
+static const struct driver_info ax88179_info = {
+ .description = "ASIX AX88179 USB 3.0 Gigibit Ethernet",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info ax88178a_info = {
+ .description = "ASIX AX88178A USB 2.0 Gigibit Ethernet",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info sitecom_info = {
+ .description = "Sitecom USB 3.0 to Gigabit Adapter",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+{
+ /* ASIX AX88179 10/100/1000 */
+ USB_DEVICE(0x0b95, 0x1790),
+ .driver_info = (unsigned long)&ax88179_info,
+}, {
+ /* ASIX AX88178A 10/100/1000 */
+ USB_DEVICE(0x0b95, 0x178a),
+ .driver_info = (unsigned long)&ax88178a_info,
+}, {
+ /* Sitecom USB 3.0 to Gigabit Adapter */
+ USB_DEVICE(0x0df6, 0x0072),
+ .driver_info = (unsigned long) &sitecom_info,
+},
+ { },
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver ax88179_178a_driver = {
+ .name = "ax88179_178a",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = ax88179_suspend,
+ .resume = ax88179_resume,
+ .disconnect = usbnet_disconnect,
+ .supports_autosuspend = 1,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ax88179_178a_driver);
+
+MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
.driver_info = (unsigned long) &wwan_info,
},
+ /* tag Huawei devices as wwan */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x12d1,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_NCM,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+ },
+
/* Huawei NCM devices disguised as vendor specific */
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
.driver_info = (unsigned long)&wwan_info,
#define WME_MAX_BA WME_BA_BMP_SIZE
#define ATH_TID_MAX_BUFS (2 * WME_MAX_BA)
-#define ATH_RSSI_DUMMY_MARKER 0x127
+#define ATH_RSSI_DUMMY_MARKER 127
#define ATH_RSSI_LPF_LEN 10
#define RSSI_LPF_THRESHOLD -20
#define ATH_RSSI_EP_MULTIPLIER (1<<7)
#include <linux/firmware.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <net/mac80211.h>
last_rssi = priv->rx.last_rssi;
- if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
- rxbuf->rxstatus.rs_rssi = ATH_EP_RND(last_rssi,
- ATH_RSSI_EP_MULTIPLIER);
+ if (ieee80211_is_beacon(hdr->frame_control) &&
+ !is_zero_ether_addr(common->curbssid) &&
+ ether_addr_equal(hdr->addr3, common->curbssid)) {
+ s8 rssi = rxbuf->rxstatus.rs_rssi;
- if (rxbuf->rxstatus.rs_rssi < 0)
- rxbuf->rxstatus.rs_rssi = 0;
+ if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
+ rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER);
- if (ieee80211_is_beacon(fc))
- priv->ah->stats.avgbrssi = rxbuf->rxstatus.rs_rssi;
+ if (rssi < 0)
+ rssi = 0;
+
+ priv->ah->stats.avgbrssi = rssi;
+ }
rx_status->mactime = be64_to_cpu(rxbuf->rxstatus.rs_tstamp);
rx_status->band = hw->conf.channel->band;
reset_type = ATH9K_RESET_POWER_ON;
else
reset_type = ATH9K_RESET_COLD;
- }
+ } else if (ah->chip_fullsleep || REG_READ(ah, AR_Q_TXE) ||
+ (REG_READ(ah, AR_CR) & AR_CR_RXE))
+ reset_type = ATH9K_RESET_COLD;
if (!ath9k_hw_set_reset_reg(ah, reset_type))
return false;
TRACE_EVENT(iwlwifi_dev_hcmd,
TP_PROTO(const struct device *dev,
struct iwl_host_cmd *cmd, u16 total_size,
- const void *hdr, size_t hdr_len),
- TP_ARGS(dev, cmd, total_size, hdr, hdr_len),
+ struct iwl_cmd_header *hdr),
+ TP_ARGS(dev, cmd, total_size, hdr),
TP_STRUCT__entry(
DEV_ENTRY
__dynamic_array(u8, hcmd, total_size)
__field(u32, flags)
),
TP_fast_assign(
- int i, offset = hdr_len;
+ int i, offset = sizeof(*hdr);
DEV_ASSIGN;
__entry->flags = cmd->flags;
- memcpy(__get_dynamic_array(hcmd), hdr, hdr_len);
+ memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr));
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
if (!cmd->len[i])
continue;
- if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY))
- continue;
memcpy((u8 *)__get_dynamic_array(hcmd) + offset,
cmd->data[i], cmd->len[i]);
offset += cmd->len[i];
u8 data[];
} __packed;
-#define IWL_PHY_DB_STATIC_PIC cpu_to_le32(0x21436587)
-static inline void iwl_phy_db_test_pic(__le32 pic)
-{
- WARN_ON(IWL_PHY_DB_STATIC_PIC != pic);
-}
-
struct iwl_phy_db *iwl_phy_db_init(struct iwl_trans *trans)
{
struct iwl_phy_db *phy_db = kzalloc(sizeof(struct iwl_phy_db),
(size - CHANNEL_NUM_SIZE) / phy_db->channel_num;
}
- /* Test PIC */
- if (type != IWL_PHY_DB_CFG)
- iwl_phy_db_test_pic(*(((__le32 *)phy_db_notif->data) +
- (size / sizeof(__le32)) - 1));
-
IWL_DEBUG_INFO(phy_db->trans,
"%s(%d): [PHYDB]SET: Type %d , Size: %d\n",
__func__, __LINE__, type, size);
*size = entry->size;
}
- /* Test PIC */
- if (type != IWL_PHY_DB_CFG)
- iwl_phy_db_test_pic(*(((__le32 *)*data) +
- (*size / sizeof(__le32)) - 1));
-
IWL_DEBUG_INFO(phy_db->trans,
"%s(%d): [PHYDB] GET: Type %d , Size: %d\n",
__func__, __LINE__, type, *size);
*
*****************************************************************************/
+#include <linux/etherdevice.h>
#include <net/cfg80211.h>
#include <net/ipv6.h>
#include "iwl-modparams.h"
sizeof(wkc), &wkc);
data->error = ret != 0;
+ mvm->ptk_ivlen = key->iv_len;
+ mvm->ptk_icvlen = key->icv_len;
+ mvm->gtk_ivlen = key->iv_len;
+ mvm->gtk_icvlen = key->icv_len;
+
/* don't upload key again */
goto out_unlock;
}
*/
if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
key->hw_key_idx = 0;
+ mvm->ptk_ivlen = key->iv_len;
+ mvm->ptk_icvlen = key->icv_len;
} else {
data->gtk_key_idx++;
key->hw_key_idx = data->gtk_key_idx;
+ mvm->gtk_ivlen = key->iv_len;
+ mvm->gtk_icvlen = key->icv_len;
}
ret = iwl_mvm_set_sta_key(mvm, vif, sta, key, true);
/* We reprogram keys and shouldn't allocate new key indices */
memset(mvm->fw_key_table, 0, sizeof(mvm->fw_key_table));
+ mvm->ptk_ivlen = 0;
+ mvm->ptk_icvlen = 0;
+ mvm->ptk_ivlen = 0;
+ mvm->ptk_icvlen = 0;
+
/*
* The D3 firmware still hardcodes the AP station ID for the
* BSS we're associated with as 0. As a result, we have to move
struct iwl_wowlan_status *status;
u32 reasons;
int ret, len;
- bool pkt8023 = false;
struct sk_buff *pkt = NULL;
iwl_trans_read_mem_bytes(mvm->trans, base,
status = (void *)cmd.resp_pkt->data;
if (len - sizeof(struct iwl_cmd_header) !=
- sizeof(*status) + le32_to_cpu(status->wake_packet_bufsize)) {
+ sizeof(*status) +
+ ALIGN(le32_to_cpu(status->wake_packet_bufsize), 4)) {
IWL_ERR(mvm, "Invalid WoWLAN status response!\n");
goto out;
}
goto report;
}
- if (reasons & IWL_WOWLAN_WAKEUP_BY_MAGIC_PACKET) {
+ if (reasons & IWL_WOWLAN_WAKEUP_BY_MAGIC_PACKET)
wakeup.magic_pkt = true;
- pkt8023 = true;
- }
- if (reasons & IWL_WOWLAN_WAKEUP_BY_PATTERN) {
+ if (reasons & IWL_WOWLAN_WAKEUP_BY_PATTERN)
wakeup.pattern_idx =
le16_to_cpu(status->pattern_number);
- pkt8023 = true;
- }
if (reasons & (IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_MISSED_BEACON |
IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_DEAUTH))
wakeup.disconnect = true;
- if (reasons & IWL_WOWLAN_WAKEUP_BY_GTK_REKEY_FAILURE) {
+ if (reasons & IWL_WOWLAN_WAKEUP_BY_GTK_REKEY_FAILURE)
wakeup.gtk_rekey_failure = true;
- pkt8023 = true;
- }
- if (reasons & IWL_WOWLAN_WAKEUP_BY_RFKILL_DEASSERTED) {
+ if (reasons & IWL_WOWLAN_WAKEUP_BY_RFKILL_DEASSERTED)
wakeup.rfkill_release = true;
- pkt8023 = true;
- }
- if (reasons & IWL_WOWLAN_WAKEUP_BY_EAPOL_REQUEST) {
+ if (reasons & IWL_WOWLAN_WAKEUP_BY_EAPOL_REQUEST)
wakeup.eap_identity_req = true;
- pkt8023 = true;
- }
- if (reasons & IWL_WOWLAN_WAKEUP_BY_FOUR_WAY_HANDSHAKE) {
+ if (reasons & IWL_WOWLAN_WAKEUP_BY_FOUR_WAY_HANDSHAKE)
wakeup.four_way_handshake = true;
- pkt8023 = true;
- }
if (status->wake_packet_bufsize) {
- u32 pktsize = le32_to_cpu(status->wake_packet_bufsize);
- u32 pktlen = le32_to_cpu(status->wake_packet_length);
+ int pktsize = le32_to_cpu(status->wake_packet_bufsize);
+ int pktlen = le32_to_cpu(status->wake_packet_length);
+ const u8 *pktdata = status->wake_packet;
+ struct ieee80211_hdr *hdr = (void *)pktdata;
+ int truncated = pktlen - pktsize;
+
+ /* this would be a firmware bug */
+ if (WARN_ON_ONCE(truncated < 0))
+ truncated = 0;
+
+ if (ieee80211_is_data(hdr->frame_control)) {
+ int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ int ivlen = 0, icvlen = 4; /* also FCS */
- if (pkt8023) {
pkt = alloc_skb(pktsize, GFP_KERNEL);
if (!pkt)
goto report;
- memcpy(skb_put(pkt, pktsize), status->wake_packet,
- pktsize);
+
+ memcpy(skb_put(pkt, hdrlen), pktdata, hdrlen);
+ pktdata += hdrlen;
+ pktsize -= hdrlen;
+
+ if (ieee80211_has_protected(hdr->frame_control)) {
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ ivlen = mvm->gtk_ivlen;
+ icvlen += mvm->gtk_icvlen;
+ } else {
+ ivlen = mvm->ptk_ivlen;
+ icvlen += mvm->ptk_icvlen;
+ }
+ }
+
+ /* if truncated, FCS/ICV is (partially) gone */
+ if (truncated >= icvlen) {
+ icvlen = 0;
+ truncated -= icvlen;
+ } else {
+ icvlen -= truncated;
+ truncated = 0;
+ }
+
+ pktsize -= ivlen + icvlen;
+ pktdata += ivlen;
+
+ memcpy(skb_put(pkt, pktsize), pktdata, pktsize);
+
if (ieee80211_data_to_8023(pkt, vif->addr, vif->type))
goto report;
wakeup.packet = pkt->data;
wakeup.packet_present_len = pkt->len;
- wakeup.packet_len = pkt->len - (pktlen - pktsize);
+ wakeup.packet_len = pkt->len - truncated;
wakeup.packet_80211 = false;
} else {
+ int fcslen = 4;
+
+ if (truncated >= 4) {
+ truncated -= 4;
+ fcslen = 0;
+ } else {
+ fcslen -= truncated;
+ truncated = 0;
+ }
+ pktsize -= fcslen;
wakeup.packet = status->wake_packet;
wakeup.packet_present_len = pktsize;
- wakeup.packet_len = pktlen;
+ wakeup.packet_len = pktlen - truncated;
wakeup.packet_80211 = true;
}
}
return ret;
}
-static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
+static void iwl_mvm_prepare_mac_removal(struct iwl_mvm *mvm,
+ struct ieee80211_vif *vif)
{
- struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
- struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
u32 tfd_msk = 0, ac;
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
*/
flush_work(&mvm->sta_drained_wk);
}
+}
+
+static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+ struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+
+ iwl_mvm_prepare_mac_removal(mvm, vif);
mutex_lock(&mvm->mutex);
/*
* For AP/GO interface, the tear down of the resources allocated to the
- * interface should be handled as part of the bss_info_changed flow.
+ * interface is be handled as part of the stop_ap flow.
*/
if (vif->type == NL80211_IFTYPE_AP) {
iwl_mvm_dealloc_int_sta(mvm, &mvmvif->bcast_sta);
struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+ iwl_mvm_prepare_mac_removal(mvm, vif);
+
mutex_lock(&mvm->mutex);
mvmvif->ap_active = false;
struct led_classdev led;
struct ieee80211_vif *p2p_device_vif;
+
+#ifdef CONFIG_PM_SLEEP
+ int gtk_ivlen, gtk_icvlen, ptk_ivlen, ptk_icvlen;
+#endif
};
/* Extract MVM priv from op_mode and _hw */
#define TFD_TX_CMD_SLOTS 256
#define TFD_CMD_SLOTS 32
+/*
+ * The FH will write back to the first TB only, so we need
+ * to copy some data into the buffer regardless of whether
+ * it should be mapped or not. This indicates how much to
+ * copy, even for HCMDs it must be big enough to fit the
+ * DRAM scratch from the TX cmd, at least 16 bytes.
+ */
+#define IWL_HCMD_MIN_COPY_SIZE 16
+
struct iwl_pcie_txq_entry {
struct iwl_device_cmd *cmd;
struct iwl_device_cmd *copy_cmd;
void *dup_buf = NULL;
dma_addr_t phys_addr;
int idx;
- u16 copy_size, cmd_size;
+ u16 copy_size, cmd_size, dma_size;
bool had_nocopy = false;
int i;
u32 cmd_pos;
+ const u8 *cmddata[IWL_MAX_CMD_TFDS];
+ u16 cmdlen[IWL_MAX_CMD_TFDS];
copy_size = sizeof(out_cmd->hdr);
cmd_size = sizeof(out_cmd->hdr);
BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1);
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ cmddata[i] = cmd->data[i];
+ cmdlen[i] = cmd->len[i];
+
if (!cmd->len[i])
continue;
+
+ /* need at least IWL_HCMD_MIN_COPY_SIZE copied */
+ if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
+ int copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
+
+ if (copy > cmdlen[i])
+ copy = cmdlen[i];
+ cmdlen[i] -= copy;
+ cmddata[i] += copy;
+ copy_size += copy;
+ }
+
if (cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY) {
had_nocopy = true;
if (WARN_ON(cmd->dataflags[i] & IWL_HCMD_DFL_DUP)) {
goto free_dup_buf;
}
- dup_buf = kmemdup(cmd->data[i], cmd->len[i],
+ dup_buf = kmemdup(cmddata[i], cmdlen[i],
GFP_ATOMIC);
if (!dup_buf)
return -ENOMEM;
idx = -EINVAL;
goto free_dup_buf;
}
- copy_size += cmd->len[i];
+ copy_size += cmdlen[i];
}
cmd_size += cmd->len[i];
}
/* and copy the data that needs to be copied */
cmd_pos = offsetof(struct iwl_device_cmd, payload);
+ copy_size = sizeof(out_cmd->hdr);
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
- if (!cmd->len[i])
+ int copy = 0;
+
+ if (!cmd->len)
continue;
- if (cmd->dataflags[i] & (IWL_HCMD_DFL_NOCOPY |
- IWL_HCMD_DFL_DUP))
- break;
- memcpy((u8 *)out_cmd + cmd_pos, cmd->data[i], cmd->len[i]);
- cmd_pos += cmd->len[i];
+
+ /* need at least IWL_HCMD_MIN_COPY_SIZE copied */
+ if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
+ copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
+
+ if (copy > cmd->len[i])
+ copy = cmd->len[i];
+ }
+
+ /* copy everything if not nocopy/dup */
+ if (!(cmd->dataflags[i] & (IWL_HCMD_DFL_NOCOPY |
+ IWL_HCMD_DFL_DUP)))
+ copy = cmd->len[i];
+
+ if (copy) {
+ memcpy((u8 *)out_cmd + cmd_pos, cmd->data[i], copy);
+ cmd_pos += copy;
+ copy_size += copy;
+ }
}
WARN_ON_ONCE(txq->entries[idx].copy_cmd);
out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
cmd_size, q->write_ptr, idx, trans_pcie->cmd_queue);
- phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, copy_size,
+ /*
+ * If the entire command is smaller than IWL_HCMD_MIN_COPY_SIZE, we must
+ * still map at least that many bytes for the hardware to write back to.
+ * We have enough space, so that's not a problem.
+ */
+ dma_size = max_t(u16, copy_size, IWL_HCMD_MIN_COPY_SIZE);
+
+ phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, dma_size,
DMA_BIDIRECTIONAL);
if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
idx = -ENOMEM;
}
dma_unmap_addr_set(out_meta, mapping, phys_addr);
- dma_unmap_len_set(out_meta, len, copy_size);
+ dma_unmap_len_set(out_meta, len, dma_size);
iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1);
+ /* map the remaining (adjusted) nocopy/dup fragments */
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
- const void *data = cmd->data[i];
+ const void *data = cmddata[i];
- if (!cmd->len[i])
+ if (!cmdlen[i])
continue;
if (!(cmd->dataflags[i] & (IWL_HCMD_DFL_NOCOPY |
IWL_HCMD_DFL_DUP)))
if (cmd->dataflags[i] & IWL_HCMD_DFL_DUP)
data = dup_buf;
phys_addr = dma_map_single(trans->dev, (void *)data,
- cmd->len[i], DMA_BIDIRECTIONAL);
+ cmdlen[i], DMA_BIDIRECTIONAL);
if (dma_mapping_error(trans->dev, phys_addr)) {
iwl_pcie_tfd_unmap(trans, out_meta,
&txq->tfds[q->write_ptr],
goto out;
}
- iwl_pcie_txq_build_tfd(trans, txq, phys_addr, cmd->len[i], 0);
+ iwl_pcie_txq_build_tfd(trans, txq, phys_addr, cmdlen[i], 0);
}
out_meta->flags = cmd->flags;
txq->need_update = 1;
- trace_iwlwifi_dev_hcmd(trans->dev, cmd, cmd_size,
- &out_cmd->hdr, copy_size);
+ trace_iwlwifi_dev_hcmd(trans->dev, cmd, cmd_size, &out_cmd->hdr);
/* start timer if queue currently empty */
if (q->read_ptr == q->write_ptr && trans_pcie->wd_timeout)
sdio_release_host(func);
+ /* Set fw_ready before queuing any commands so that
+ * lbs_thread won't block from sending them to firmware.
+ */
+ priv->fw_ready = 1;
+
/*
* FUNC_INIT is required for SD8688 WLAN/BT multiple functions
*/
netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
}
- priv->fw_ready = 1;
wake_up(&card->pwron_waitq);
if (!card->started) {
i++;
usleep_range(10, 20);
/* 50ms max wait */
- if (i == 50000)
+ if (i == 5000)
break;
}
*/
if_limit = &rt2x00dev->if_limits_ap;
if_limit->max = rt2x00dev->ops->max_ap_intf;
- if_limit->types = BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_MESH_POINT);
+ if_limit->types = BIT(NL80211_IFTYPE_AP);
+#ifdef CONFIG_MAC80211_MESH
+ if_limit->types |= BIT(NL80211_IFTYPE_MESH_POINT);
+#endif
/*
* Build up AP interface combinations structure.
rt2x00dev->hw->wiphy->interface_modes |=
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP) |
+#ifdef CONFIG_MAC80211_MESH
BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_WDS);
rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
/* Only called from hvcs_get_pi please */
static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd)
{
- int clclength;
-
hvcsd->p_unit_address = pi->unit_address;
hvcsd->p_partition_ID = pi->partition_ID;
- clclength = strlen(&pi->location_code[0]);
- if (clclength > HVCS_CLC_LENGTH)
- clclength = HVCS_CLC_LENGTH;
/* copy the null-term char too */
- strncpy(&hvcsd->p_location_code[0],
- &pi->location_code[0], clclength + 1);
+ strlcpy(&hvcsd->p_location_code[0],
+ &pi->location_code[0], sizeof(hvcsd->p_location_code));
}
/*
To compile this file system support as a module, choose M here: the
module will be called ecryptfs.
+
+config ECRYPT_FS_MESSAGING
+ bool "Enable notifications for userspace key wrap/unwrap"
+ depends on ECRYPT_FS
+ help
+ Enables the /dev/ecryptfs entry for use by ecryptfsd. This allows
+ for userspace to wrap/unwrap file encryption keys by other
+ backends, like OpenSSL.
#
-# Makefile for the Linux 2.6 eCryptfs
+# Makefile for the Linux eCryptfs
#
obj-$(CONFIG_ECRYPT_FS) += ecryptfs.o
-ecryptfs-objs := dentry.o file.o inode.o main.o super.o mmap.o read_write.o crypto.o keystore.o messaging.o miscdev.o kthread.o debug.o
+ecryptfs-y := dentry.o file.o inode.o main.o super.o mmap.o read_write.o \
+ crypto.o keystore.o kthread.o debug.o
+
+ecryptfs-$(CONFIG_ECRYPT_FS_MESSAGING) += messaging.o miscdev.o
while (size > 0 && i < sg_size) {
pg = virt_to_page(addr);
offset = offset_in_page(addr);
- if (sg)
- sg_set_page(&sg[i], pg, 0, offset);
+ sg_set_page(&sg[i], pg, 0, offset);
remainder_of_page = PAGE_CACHE_SIZE - offset;
if (size >= remainder_of_page) {
- if (sg)
- sg[i].length = remainder_of_page;
+ sg[i].length = remainder_of_page;
addr += remainder_of_page;
size -= remainder_of_page;
} else {
- if (sg)
- sg[i].length = size;
+ sg[i].length = size;
addr += size;
size = 0;
}
static int ecryptfs_d_revalidate(struct dentry *dentry, unsigned int flags)
{
struct dentry *lower_dentry;
- struct vfsmount *lower_mnt;
int rc = 1;
if (flags & LOOKUP_RCU)
return -ECHILD;
lower_dentry = ecryptfs_dentry_to_lower(dentry);
- lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
goto out;
rc = lower_dentry->d_op->d_revalidate(lower_dentry, flags);
#define ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE 24
#define ECRYPTFS_ENCRYPTED_DENTRY_NAME_LEN (18 + 1 + 4 + 1 + 32)
+#ifdef CONFIG_ECRYPT_FS_MESSAGING
+# define ECRYPTFS_VERSIONING_MASK_MESSAGING (ECRYPTFS_VERSIONING_DEVMISC \
+ | ECRYPTFS_VERSIONING_PUBKEY)
+#else
+# define ECRYPTFS_VERSIONING_MASK_MESSAGING 0
+#endif
+
+#define ECRYPTFS_VERSIONING_MASK (ECRYPTFS_VERSIONING_PASSPHRASE \
+ | ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH \
+ | ECRYPTFS_VERSIONING_XATTR \
+ | ECRYPTFS_VERSIONING_MULTKEY \
+ | ECRYPTFS_VERSIONING_MASK_MESSAGING \
+ | ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION)
struct ecryptfs_key_sig {
struct list_head crypt_stat_list;
char keysig[ECRYPTFS_SIG_SIZE_HEX + 1];
struct hlist_node euid_chain;
};
+#ifdef CONFIG_ECRYPT_FS_MESSAGING
extern struct mutex ecryptfs_daemon_hash_mux;
+#endif
static inline size_t
ecryptfs_lower_header_size(struct ecryptfs_crypt_stat *crypt_stat)
ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value,
size_t size, int flags);
int ecryptfs_read_xattr_region(char *page_virt, struct inode *ecryptfs_inode);
+#ifdef CONFIG_ECRYPT_FS_MESSAGING
int ecryptfs_process_response(struct ecryptfs_daemon *daemon,
struct ecryptfs_message *msg, u32 seq);
int ecryptfs_send_message(char *data, int data_len,
struct ecryptfs_message **emsg);
int ecryptfs_init_messaging(void);
void ecryptfs_release_messaging(void);
+#else
+static inline int ecryptfs_init_messaging(void)
+{
+ return 0;
+}
+static inline void ecryptfs_release_messaging(void)
+{ }
+static inline int ecryptfs_send_message(char *data, int data_len,
+ struct ecryptfs_msg_ctx **msg_ctx)
+{
+ return -ENOTCONN;
+}
+static inline int ecryptfs_wait_for_response(struct ecryptfs_msg_ctx *msg_ctx,
+ struct ecryptfs_message **emsg)
+{
+ return -ENOMSG;
+}
+#endif
void
ecryptfs_write_header_metadata(char *virt,
size_t offset_in_page, size_t size,
struct inode *ecryptfs_inode);
struct page *ecryptfs_get_locked_page(struct inode *inode, loff_t index);
-int ecryptfs_exorcise_daemon(struct ecryptfs_daemon *daemon);
-int ecryptfs_find_daemon_by_euid(struct ecryptfs_daemon **daemon);
int ecryptfs_parse_packet_length(unsigned char *data, size_t *size,
size_t *length_size);
int ecryptfs_write_packet_length(char *dest, size_t size,
size_t *packet_size_length);
+#ifdef CONFIG_ECRYPT_FS_MESSAGING
int ecryptfs_init_ecryptfs_miscdev(void);
void ecryptfs_destroy_ecryptfs_miscdev(void);
int ecryptfs_send_miscdev(char *data, size_t data_size,
void ecryptfs_msg_ctx_alloc_to_free(struct ecryptfs_msg_ctx *msg_ctx);
int
ecryptfs_spawn_daemon(struct ecryptfs_daemon **daemon, struct file *file);
+int ecryptfs_exorcise_daemon(struct ecryptfs_daemon *daemon);
+int ecryptfs_find_daemon_by_euid(struct ecryptfs_daemon **daemon);
+#endif
int ecryptfs_init_kthread(void);
void ecryptfs_destroy_kthread(void);
int ecryptfs_privileged_open(struct file **lower_file,
struct dentry *ecryptfs_dentry = file->f_path.dentry;
/* Private value of ecryptfs_dentry allocated in
* ecryptfs_lookup() */
- struct dentry *lower_dentry;
struct ecryptfs_file_info *file_info;
mount_crypt_stat = &ecryptfs_superblock_to_private(
rc = -ENOMEM;
goto out;
}
- lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
crypt_stat = &ecryptfs_inode_to_private(inode)->crypt_stat;
mutex_lock(&crypt_stat->cs_mutex);
if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED)) {
return rc;
}
-int ecryptfs_getattr_link(struct vfsmount *mnt, struct dentry *dentry,
- struct kstat *stat)
+static int ecryptfs_getattr_link(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
{
struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
int rc = 0;
return rc;
}
-int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
- struct kstat *stat)
+static int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
{
struct kstat lower_stat;
int rc;
struct ecryptfs_message *msg = NULL;
char *auth_tok_sig;
char *payload;
- size_t payload_len;
+ size_t payload_len = 0;
int rc;
rc = ecryptfs_get_auth_tok_sig(&auth_tok_sig, auth_tok);
rc = ecryptfs_send_message(payload, payload_len, &msg_ctx);
if (rc) {
ecryptfs_printk(KERN_ERR, "Error sending message to "
- "ecryptfsd\n");
+ "ecryptfsd: %d\n", rc);
goto out;
}
rc = ecryptfs_wait_for_response(msg_ctx, &msg);
crypt_stat->key_size);
}
out:
- if (msg)
- kfree(msg);
+ kfree(msg);
return rc;
}
rc = ecryptfs_send_message(payload, payload_len, &msg_ctx);
if (rc) {
ecryptfs_printk(KERN_ERR, "Error sending message to "
- "ecryptfsd\n");
+ "ecryptfsd: %d\n", rc);
goto out;
}
rc = ecryptfs_wait_for_response(msg_ctx, &msg);
void ecryptfs_msg_ctx_alloc_to_free(struct ecryptfs_msg_ctx *msg_ctx)
{
list_move(&(msg_ctx->node), &ecryptfs_msg_ctx_free_list);
- if (msg_ctx->msg)
- kfree(msg_ctx->msg);
+ kfree(msg_ctx->msg);
msg_ctx->msg = NULL;
msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_FREE;
}
int rc;
rc = ecryptfs_find_daemon_by_euid(&daemon);
- if (rc || !daemon) {
+ if (rc) {
rc = -ENOTCONN;
goto out;
}
#define ECRYPTFS_VERSION_MINOR 0x04
#define ECRYPTFS_SUPPORTED_FILE_VERSION 0x03
/* These flags indicate which features are supported by the kernel
- * module; userspace tools such as the mount helper read
- * ECRYPTFS_VERSIONING_MASK from a sysfs handle in order to determine
- * how to behave. */
+ * module; userspace tools such as the mount helper read the feature
+ * bits from a sysfs handle in order to determine how to behave. */
#define ECRYPTFS_VERSIONING_PASSPHRASE 0x00000001
#define ECRYPTFS_VERSIONING_PUBKEY 0x00000002
#define ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH 0x00000004
#define ECRYPTFS_VERSIONING_HMAC 0x00000080
#define ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION 0x00000100
#define ECRYPTFS_VERSIONING_GCM 0x00000200
-#define ECRYPTFS_VERSIONING_MASK (ECRYPTFS_VERSIONING_PASSPHRASE \
- | ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH \
- | ECRYPTFS_VERSIONING_PUBKEY \
- | ECRYPTFS_VERSIONING_XATTR \
- | ECRYPTFS_VERSIONING_MULTKEY \
- | ECRYPTFS_VERSIONING_DEVMISC \
- | ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION)
#define ECRYPTFS_MAX_PASSWORD_LENGTH 64
#define ECRYPTFS_MAX_PASSPHRASE_BYTES ECRYPTFS_MAX_PASSWORD_LENGTH
#define ECRYPTFS_SALT_SIZE 8
#ifdef CONFIG_PREEMPT_COUNT
# define preemptible() (preempt_count() == 0 && !irqs_disabled())
-# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1)
#else
# define preemptible() 0
-# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET
#endif
#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
retry:
ret = 0;
htable_bits++;
+ pr_debug("attempt to resize set %s from %u to %u, t %p\n",
+ set->name, orig->htable_bits, htable_bits, orig);
if (!htable_bits) {
/* In case we have plenty of memory :-) */
pr_warning("Cannot increase the hashsize of set %s further\n",
data = ahash_tdata(n, j);
m = hbucket(t, HKEY(data, h->initval, htable_bits));
ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0,
- type_pf_data_timeout(data));
+ ip_set_timeout_get(type_pf_data_timeout(data)));
if (ret < 0) {
read_unlock_bh(&set->lock);
ahash_destroy(t);
* parked (cpu offline)
* @unpark: Optional unpark function, called when the thread is
* unparked (cpu online)
+ * @pre_unpark: Optional unpark function, called before the thread is
+ * unparked (cpu online). This is not guaranteed to be
+ * called on the target cpu of the thread. Careful!
* @selfparking: Thread is not parked by the park function.
* @thread_comm: The base name of the thread
*/
void (*cleanup)(unsigned int cpu, bool online);
void (*park)(unsigned int cpu);
void (*unpark)(unsigned int cpu);
+ void (*pre_unpark)(unsigned int cpu);
bool selfparking;
const char *thread_comm;
};
if (sysctl_tcp_low_latency || !tp->ucopy.task)
return false;
+ if (skb->len <= tcp_hdrlen(skb) &&
+ skb_queue_len(&tp->ucopy.prequeue) == 0)
+ return false;
+
__skb_queue_tail(&tp->ucopy.prequeue, skb);
tp->ucopy.memory += skb->truesize;
if (tp->ucopy.memory > sk->sk_rcvbuf) {
{
struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu);
+ if (ht->pre_unpark)
+ ht->pre_unpark(cpu);
kthread_unpark(tsk);
}
static inline void invoke_softirq(void)
{
- if (!force_irqthreads) {
-#ifdef __ARCH_IRQ_EXIT_IRQS_DISABLED
+ if (!force_irqthreads)
__do_softirq();
-#else
- do_softirq();
-#endif
- } else {
- __local_bh_disable((unsigned long)__builtin_return_address(0),
- SOFTIRQ_OFFSET);
+ else
wakeup_softirqd();
- __local_bh_enable(SOFTIRQ_OFFSET);
- }
}
/*
*/
void irq_exit(void)
{
+#ifndef __ARCH_IRQ_EXIT_IRQS_DISABLED
+ local_irq_disable();
+#else
+ WARN_ON_ONCE(!irqs_disabled());
+#endif
+
account_irq_exit_time(current);
trace_hardirq_exit();
- sub_preempt_count(IRQ_EXIT_OFFSET);
+ sub_preempt_count(HARDIRQ_OFFSET);
if (!in_interrupt() && local_softirq_pending())
invoke_softirq();
tick_nohz_irq_exit();
#endif
rcu_irq_exit();
- sched_preempt_enable_no_resched();
}
/*
.create = cpu_stop_create,
.setup = cpu_stop_unpark,
.park = cpu_stop_park,
- .unpark = cpu_stop_unpark,
+ .pre_unpark = cpu_stop_unpark,
.selfparking = true,
};
return NULL;
}
-void caif_flow_cb(struct sk_buff *skb)
+static void caif_flow_cb(struct sk_buff *skb)
{
struct caif_device_entry *caifd;
void (*dtor)(struct sk_buff *skb) = NULL;
layr->up->ctrlcmd(layr->up, ctrl, layr->id);
}
-struct cflayer *cfusbl_create(int phyid, u8 ethaddr[ETH_ALEN],
- u8 braddr[ETH_ALEN])
+static struct cflayer *cfusbl_create(int phyid, u8 ethaddr[ETH_ALEN],
+ u8 braddr[ETH_ALEN])
{
struct cfusbl *this = kmalloc(sizeof(struct cfusbl), GFP_ATOMIC);
icmp_send(skb, ICMP_DEST_UNREACH,
ICMP_PROT_UNREACH, 0);
}
- } else
+ kfree_skb(skb);
+ } else {
IP_INC_STATS_BH(net, IPSTATS_MIB_INDELIVERS);
- kfree_skb(skb);
+ consume_skb(skb);
+ }
}
}
out:
if (tcp_checksum_complete_user(sk, skb))
goto csum_error;
+ if ((int)skb->truesize > sk->sk_forward_alloc)
+ goto step5;
+
/* Predicted packet is in window by definition.
* seq == rcv_nxt and rcv_wup <= rcv_nxt.
* Hence, check seq<=rcv_wup reduces to:
tcp_rcv_rtt_measure_ts(sk, skb);
- if ((int)skb->truesize > sk->sk_forward_alloc)
- goto step5;
-
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPHPHITS);
/* Bulk data transfer: receiver */
icmpv6_send(skb, ICMPV6_PARAMPROB,
ICMPV6_UNK_NEXTHDR, nhoff);
}
- } else
+ kfree_skb(skb);
+ } else {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDELIVERS);
- kfree_skb(skb);
+ consume_skb(skb);
+ }
}
rcu_read_unlock();
return 0;
restart:
read_lock_bh(&table->tb6_lock);
for (rt = table->tb6_root.leaf; rt; rt = rt->dst.rt6_next) {
- if (rt->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) {
+ if (rt->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF) &&
+ (!rt->rt6i_idev || rt->rt6i_idev->cnf.accept_ra != 2)) {
dst_hold(&rt->dst);
read_unlock_bh(&table->tb6_lock);
ip6_del_rt(rt);
/* case CS_ISO_8859_9: */
/* case CS_UNICODE: */
default:
- IRDA_DEBUG(0, "%s(), charset %s, not supported\n",
- __func__, ias_charset_types[charset]);
+ IRDA_DEBUG(0, "%s(), charset [%d] %s, not supported\n",
+ __func__, charset,
+ charset < ARRAY_SIZE(ias_charset_types) ?
+ ias_charset_types[charset] :
+ "(unknown)");
/* Aborting, close connection! */
iriap_disconnect_request(self);
l2tp_xmit_skb(session, skb, session->hdr_len);
sock_put(ps->tunnel_sock);
+ sock_put(sk);
return error;
struct cfg80211_chan_def *chandef)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
+ struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_chanctx_conf *chanctx_conf;
int ret = -ENODATA;
rcu_read_lock();
- chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
- if (chanctx_conf) {
- *chandef = chanctx_conf->def;
+ if (local->use_chanctx) {
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (chanctx_conf) {
+ *chandef = chanctx_conf->def;
+ ret = 0;
+ }
+ } else if (local->open_count == local->monitors) {
+ *chandef = local->monitor_chandef;
ret = 0;
}
rcu_read_unlock();
lockdep_assert_held(&local->mtx);
- active = !list_empty(&local->chanctx_list);
+ active = !list_empty(&local->chanctx_list) || local->monitors;
if (!local->ops->remain_on_channel) {
list_for_each_entry(roc, &local->roc_list, list) {
if (local->queue_stop_reasons[q] ||
(!txpending && !skb_queue_empty(&local->pending[q]))) {
if (unlikely(info->flags &
- IEEE80211_TX_INTFL_OFFCHAN_TX_OK &&
- local->queue_stop_reasons[q] &
- ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL))) {
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) {
+ if (local->queue_stop_reasons[q] &
+ ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL)) {
+ /*
+ * Drop off-channel frames if queues
+ * are stopped for any reason other
+ * than off-channel operation. Never
+ * queue them.
+ */
+ spin_unlock_irqrestore(
+ &local->queue_stop_reason_lock,
+ flags);
+ ieee80211_purge_tx_queue(&local->hw,
+ skbs);
+ return true;
+ }
+ } else {
+
/*
- * Drop off-channel frames if queues are stopped
- * for any reason other than off-channel
- * operation. Never queue them.
+ * Since queue is stopped, queue up frames for
+ * later transmission from the tx-pending
+ * tasklet when the queue is woken again.
*/
- spin_unlock_irqrestore(
- &local->queue_stop_reason_lock, flags);
- ieee80211_purge_tx_queue(&local->hw, skbs);
- return true;
+ if (txpending)
+ skb_queue_splice_init(skbs,
+ &local->pending[q]);
+ else
+ skb_queue_splice_tail_init(skbs,
+ &local->pending[q]);
+
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock,
+ flags);
+ return false;
}
-
- /*
- * Since queue is stopped, queue up frames for later
- * transmission from the tx-pending tasklet when the
- * queue is woken again.
- */
- if (txpending)
- skb_queue_splice_init(skbs, &local->pending[q]);
- else
- skb_queue_splice_tail_init(skbs,
- &local->pending[q]);
-
- spin_unlock_irqrestore(&local->queue_stop_reason_lock,
- flags);
- return false;
}
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
}
if (!is_multicast_ether_addr(skb->data)) {
+ struct sta_info *next_hop;
+ bool mpp_lookup = true;
+
mpath = mesh_path_lookup(sdata, skb->data);
- if (!mpath)
+ if (mpath) {
+ mpp_lookup = false;
+ next_hop = rcu_dereference(mpath->next_hop);
+ if (!next_hop ||
+ !(mpath->flags & (MESH_PATH_ACTIVE |
+ MESH_PATH_RESOLVING)))
+ mpp_lookup = true;
+ }
+
+ if (mpp_lookup)
mppath = mpp_path_lookup(sdata, skb->data);
+
+ if (mppath && mpath)
+ mesh_path_del(mpath->sdata, mpath->dst);
}
/*
if (local->tim_in_locked_section) {
__ieee80211_beacon_add_tim(sdata, ps, skb);
} else {
- spin_lock(&local->tim_lock);
+ spin_lock_bh(&local->tim_lock);
__ieee80211_beacon_add_tim(sdata, ps, skb);
- spin_unlock(&local->tim_lock);
+ spin_unlock_bh(&local->tim_lock);
}
return 0;
if (ret == -EAGAIN)
ret = 1;
- return ret < 0 ? ret : ret > 0 ? 0 : -IPSET_ERR_EXIST;
+ return (ret < 0 && ret != -ENOTEMPTY) ? ret :
+ ret > 0 ? 0 : -IPSET_ERR_EXIST;
}
/* Get headed data of a set */
void rds_message_put(struct rds_message *rm)
{
rdsdebug("put rm %p ref %d\n", rm, atomic_read(&rm->m_refcount));
- if (atomic_read(&rm->m_refcount) == 0) {
-printk(KERN_CRIT "danger refcount zero on %p\n", rm);
-WARN_ON(1);
- }
+ WARN(!atomic_read(&rm->m_refcount), "danger refcount zero on %p\n", rm);
if (atomic_dec_and_test(&rm->m_refcount)) {
BUG_ON(!list_empty(&rm->m_sock_item));
BUG_ON(!list_empty(&rm->m_conn_item));
{
struct rds_message *rm;
+ if (extra_len > KMALLOC_MAX_SIZE - sizeof(struct rds_message))
+ return NULL;
+
rm = kzalloc(sizeof(struct rds_message) + extra_len, gfp);
if (!rm)
goto out;
/* SCTP-AUTH extensions*/
INIT_LIST_HEAD(&ep->endpoint_shared_keys);
- null_key = sctp_auth_shkey_create(0, GFP_KERNEL);
+ null_key = sctp_auth_shkey_create(0, gfp);
if (!null_key)
goto nomem;
if (len < sizeof(sctp_assoc_t))
return -EINVAL;
+ /* Allow the struct to grow and fill in as much as possible */
+ len = min_t(size_t, len, sizeof(sas));
+
if (copy_from_user(&sas, optval, len))
return -EFAULT;
/* Mark beginning of a new observation period */
asoc->stats.max_obs_rto = asoc->rto_min;
- /* Allow the struct to grow and fill in as much as possible */
- len = min_t(size_t, len, sizeof(sas));
-
if (put_user(len, optlen))
return -EFAULT;
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
-#define MAX_KMALLOC_SIZE 131072
-
static struct sctp_ssnmap *sctp_ssnmap_init(struct sctp_ssnmap *map, __u16 in,
__u16 out);
int size;
size = sctp_ssnmap_size(in, out);
- if (size <= MAX_KMALLOC_SIZE)
+ if (size <= KMALLOC_MAX_SIZE)
retval = kmalloc(size, gfp);
else
retval = (struct sctp_ssnmap *)
return retval;
fail_map:
- if (size <= MAX_KMALLOC_SIZE)
+ if (size <= KMALLOC_MAX_SIZE)
kfree(retval);
else
free_pages((unsigned long)retval, get_order(size));
int size;
size = sctp_ssnmap_size(map->in.len, map->out.len);
- if (size <= MAX_KMALLOC_SIZE)
+ if (size <= KMALLOC_MAX_SIZE)
kfree(map);
else
free_pages((unsigned long)map, get_order(size));
static void sctp_tsnmap_update(struct sctp_tsnmap *map);
static void sctp_tsnmap_find_gap_ack(unsigned long *map, __u16 off,
__u16 len, __u16 *start, __u16 *end);
-static int sctp_tsnmap_grow(struct sctp_tsnmap *map, u16 gap);
+static int sctp_tsnmap_grow(struct sctp_tsnmap *map, u16 size);
/* Initialize a block of memory as a tsnmap. */
struct sctp_tsnmap *sctp_tsnmap_init(struct sctp_tsnmap *map, __u16 len,
gap = tsn - map->base_tsn;
- if (gap >= map->len && !sctp_tsnmap_grow(map, gap))
+ if (gap >= map->len && !sctp_tsnmap_grow(map, gap + 1))
return -ENOMEM;
if (!sctp_tsnmap_has_gap(map) && gap == 0) {
return ngaps;
}
-static int sctp_tsnmap_grow(struct sctp_tsnmap *map, u16 gap)
+static int sctp_tsnmap_grow(struct sctp_tsnmap *map, u16 size)
{
unsigned long *new;
unsigned long inc;
u16 len;
- if (gap >= SCTP_TSN_MAP_SIZE)
+ if (size > SCTP_TSN_MAP_SIZE)
return 0;
- inc = ALIGN((gap - map->len),BITS_PER_LONG) + SCTP_TSN_MAP_INCREMENT;
+ inc = ALIGN((size - map->len), BITS_PER_LONG) + SCTP_TSN_MAP_INCREMENT;
len = min_t(u16, map->len + inc, SCTP_TSN_MAP_SIZE);
new = kzalloc(len>>3, GFP_ATOMIC);
if (!new)
return 0;
- bitmap_copy(new, map->tsn_map, map->max_tsn_seen - map->base_tsn);
+ bitmap_copy(new, map->tsn_map,
+ map->max_tsn_seen - map->cumulative_tsn_ack_point);
kfree(map->tsn_map);
map->tsn_map = new;
map->len = len;
{
struct sk_buff_head temp;
struct sctp_ulpevent *event;
+ int event_eor = 0;
/* Create an event from the incoming chunk. */
event = sctp_ulpevent_make_rcvmsg(chunk->asoc, chunk, gfp);
/* Send event to the ULP. 'event' is the sctp_ulpevent for
* very first SKB on the 'temp' list.
*/
- if (event)
+ if (event) {
+ event_eor = (event->msg_flags & MSG_EOR) ? 1 : 0;
sctp_ulpq_tail_event(ulpq, event);
+ }
- return 0;
+ return event_eor;
}
/* Add a new event for propagation to the ULP. */
ctsn = cevent->tsn;
switch (cevent->msg_flags & SCTP_DATA_FRAG_MASK) {
+ case SCTP_DATA_FIRST_FRAG:
+ if (!first_frag)
+ return NULL;
+ goto done;
case SCTP_DATA_MIDDLE_FRAG:
if (!first_frag) {
first_frag = pos;
next_tsn = ctsn + 1;
last_frag = pos;
- } else if (next_tsn == ctsn)
+ } else if (next_tsn == ctsn) {
next_tsn++;
- else
+ last_frag = pos;
+ } else
goto done;
break;
case SCTP_DATA_LAST_FRAG:
} else
goto done;
break;
+
+ case SCTP_DATA_LAST_FRAG:
+ if (!first_frag)
+ return NULL;
+ else
+ goto done;
+ break;
+
default:
return NULL;
}
struct sk_buff_head *list, __u16 needed)
{
__u16 freed = 0;
- __u32 tsn;
- struct sk_buff *skb;
+ __u32 tsn, last_tsn;
+ struct sk_buff *skb, *flist, *last;
struct sctp_ulpevent *event;
struct sctp_tsnmap *tsnmap;
tsnmap = &ulpq->asoc->peer.tsn_map;
- while ((skb = __skb_dequeue_tail(list)) != NULL) {
- freed += skb_headlen(skb);
+ while ((skb = skb_peek_tail(list)) != NULL) {
event = sctp_skb2event(skb);
tsn = event->tsn;
+ /* Don't renege below the Cumulative TSN ACK Point. */
+ if (TSN_lte(tsn, sctp_tsnmap_get_ctsn(tsnmap)))
+ break;
+
+ /* Events in ordering queue may have multiple fragments
+ * corresponding to additional TSNs. Sum the total
+ * freed space; find the last TSN.
+ */
+ freed += skb_headlen(skb);
+ flist = skb_shinfo(skb)->frag_list;
+ for (last = flist; flist; flist = flist->next) {
+ last = flist;
+ freed += skb_headlen(last);
+ }
+ if (last)
+ last_tsn = sctp_skb2event(last)->tsn;
+ else
+ last_tsn = tsn;
+
+ /* Unlink the event, then renege all applicable TSNs. */
+ __skb_unlink(skb, list);
sctp_ulpevent_free(event);
- sctp_tsnmap_renege(tsnmap, tsn);
+ while (TSN_lte(tsn, last_tsn)) {
+ sctp_tsnmap_renege(tsnmap, tsn);
+ tsn++;
+ }
if (freed >= needed)
return freed;
}
struct sctp_ulpevent *event;
struct sctp_association *asoc;
struct sctp_sock *sp;
+ __u32 ctsn;
+ struct sk_buff *skb;
asoc = ulpq->asoc;
sp = sctp_sk(asoc->base.sk);
/* If the association is already in Partial Delivery mode
- * we have noting to do.
+ * we have nothing to do.
*/
if (ulpq->pd_mode)
return;
+ /* Data must be at or below the Cumulative TSN ACK Point to
+ * start partial delivery.
+ */
+ skb = skb_peek(&asoc->ulpq.reasm);
+ if (skb != NULL) {
+ ctsn = sctp_skb2event(skb)->tsn;
+ if (!TSN_lte(ctsn, sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map)))
+ return;
+ }
+
/* If the user enabled fragment interleave socket option,
* multiple associations can enter partial delivery.
* Otherwise, we can only enter partial delivery if the
}
/* If able to free enough room, accept this chunk. */
if (chunk && (freed >= needed)) {
- __u32 tsn;
- tsn = ntohl(chunk->subh.data_hdr->tsn);
- sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn, chunk->transport);
- sctp_ulpq_tail_data(ulpq, chunk, gfp);
-
- sctp_ulpq_partial_delivery(ulpq, gfp);
+ int retval;
+ retval = sctp_ulpq_tail_data(ulpq, chunk, gfp);
+ /*
+ * Enter partial delivery if chunk has not been
+ * delivered; otherwise, drain the reassembly queue.
+ */
+ if (retval <= 0)
+ sctp_ulpq_partial_delivery(ulpq, gfp);
+ else if (retval == 1)
+ sctp_ulpq_reasm_drain(ulpq);
}
sk_mem_reclaim(asoc->base.sk);
if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IBSS))
goto nla_put_failure;
- if (chan->flags & IEEE80211_CHAN_RADAR) {
- u32 time = elapsed_jiffies_msecs(chan->dfs_state_entered);
- if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
- goto nla_put_failure;
- if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_STATE,
- chan->dfs_state))
- goto nla_put_failure;
- if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time))
- goto nla_put_failure;
- }
+ if ((chan->flags & IEEE80211_CHAN_RADAR) &&
+ nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
+ goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
goto nla_put_failure;
nla_put_u32(msg, NL80211_IFACE_COMB_MAXNUM,
c->max_interfaces))
goto nla_put_failure;
- if (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
- c->radar_detect_widths))
- goto nla_put_failure;
nla_nest_end(msg, nl_combi);
}
return -ENOBUFS;
}
-#ifdef CONFIG_PM
-static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev,
- struct sk_buff *msg)
-{
- const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan.tcp;
- struct nlattr *nl_tcp;
-
- if (!tcp)
- return 0;
-
- nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION);
- if (!nl_tcp)
- return -ENOBUFS;
-
- if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
- tcp->data_payload_max))
- return -ENOBUFS;
-
- if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
- tcp->data_payload_max))
- return -ENOBUFS;
-
- if (tcp->seq && nla_put_flag(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ))
- return -ENOBUFS;
-
- if (tcp->tok && nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
- sizeof(*tcp->tok), tcp->tok))
- return -ENOBUFS;
-
- if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL,
- tcp->data_interval_max))
- return -ENOBUFS;
-
- if (nla_put_u32(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
- tcp->wake_payload_max))
- return -ENOBUFS;
-
- nla_nest_end(msg, nl_tcp);
- return 0;
-}
-#endif
-
static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flags,
struct cfg80211_registered_device *dev)
{
goto nla_put_failure;
}
- if (nl80211_send_wowlan_tcp_caps(dev, msg))
- goto nla_put_failure;
-
nla_nest_end(msg, nl_wowlan);
}
#endif
projects / firefly-linux-kernel-4.4.55.git / commitdiff