if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, device,
chunk, &tmpb) < 0) {
if (!sgbuf->pages)
- return NULL;
+ goto _failed;
if (!res_size)
goto _failed;
size = sgbuf->pages * PAGE_SIZE;
for (page = blk->first_page; page <= blk->last_page; page++, idx++) {
unsigned long ofs = idx << PAGE_SHIFT;
dma_addr_t addr;
- addr = snd_pcm_sgbuf_get_addr(substream, ofs);
+ if (ofs >= runtime->dma_bytes)
+ addr = emu->silent_page.addr;
+ else
+ addr = snd_pcm_sgbuf_get_addr(substream, ofs);
if (! is_valid_page(emu, addr)) {
printk(KERN_ERR "emu: failure page = %d\n", idx);
mutex_unlock(&hdr->block_mutex);
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
+ SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Lenovo Ideapd", ALC269_FIXUP_PCM_44K),
/* Setup AB8500 according to board-settings */
pdata = (struct ab8500_platform_data *)dev_get_platdata(dev->parent);
+
+ /* Inform SoC Core that we have our own I/O arrangements. */
+ codec->control_data = (void *)true;
+
status = ab8500_audio_setup_mics(codec, &pdata->codec->amics);
if (status < 0) {
pr_err("%s: Failed to setup mics (%d)!\n", __func__, status);
printk(KERN_INFO "AD1980 SoC Audio Codec\n");
+ codec->control_data = codec; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0) {
printk(KERN_ERR "ad1980: failed to register AC97 codec\n");
{
struct mc13783_priv *priv = snd_soc_codec_get_drvdata(codec);
+ codec->control_data = priv->mc13xxx;
+
mc13xxx_lock(priv->mc13xxx);
/* these are the reset values */
{"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
{"LO", NULL, "DAC"}, /* dac --> line_out */
+ {"LINE_IN", NULL, "VAG_POWER"},
{"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
{"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
if (ret)
goto err;
- snd_soc_dapm_new_widgets(&codec->dapm);
-
return 0;
err:
printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION);
+ codec->control_data = codec; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0)
goto codec_err;
/* VMID 2*250k */
snd_soc_update_bits(codec, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK, 0x100);
+
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
+ msleep(100);
break;
case SND_SOC_BIAS_OFF:
return -EINVAL;
}
- bclk_rate = params_rate(params) * 2;
+ bclk_rate = params_rate(params) * 4;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
bclk_rate *= 16;
int ret;
int report;
+ pm_runtime_get_sync(dev);
+
ret = regmap_read(regmap, WM8994_INTERRUPT_RAW_STATUS_2, ®);
if (ret < 0) {
dev_err(dev, "Failed to read microphone status: %d\n",
ret);
+ pm_runtime_put(dev);
return;
}
snd_soc_jack_report(priv->micdet[1].jack, report,
SND_JACK_HEADSET | SND_JACK_BTN_0);
+
+ pm_runtime_put(dev);
}
static irqreturn_t wm8994_mic_irq(int irq, void *data)
int reg;
bool present;
+ pm_runtime_get_sync(codec->dev);
+
mutex_lock(&wm8994->accdet_lock);
reg = snd_soc_read(codec, WM1811_JACKDET_CTRL);
if (reg < 0) {
dev_err(codec->dev, "Failed to read jack status: %d\n", reg);
mutex_unlock(&wm8994->accdet_lock);
+ pm_runtime_put(codec->dev);
return IRQ_NONE;
}
SND_JACK_MECHANICAL | SND_JACK_HEADSET |
wm8994->btn_mask);
+ pm_runtime_put(codec->dev);
return IRQ_HANDLED;
}
if (!(snd_soc_read(codec, WM8958_MIC_DETECT_1) & WM8958_MICD_ENA))
return IRQ_HANDLED;
+ pm_runtime_get_sync(codec->dev);
+
/* We may occasionally read a detection without an impedence
* range being provided - if that happens loop again.
*/
dev_err(codec->dev,
"Failed to read mic detect status: %d\n",
reg);
+ pm_runtime_put(codec->dev);
return IRQ_NONE;
}
dev_warn(codec->dev, "Accessory detection with no callback\n");
out:
+ pm_runtime_put(codec->dev);
return IRQ_HANDLED;
}
{
int ret = 0;
+ codec->control_data = codec; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0) {
printk(KERN_ERR "wm9712: failed to register AC97 codec\n");
if (wm9713 == NULL)
return -ENOMEM;
snd_soc_codec_set_drvdata(codec, wm9713);
+ codec->control_data = wm9713; /* we don't use regmap! */
ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
if (ret < 0)
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+ struct mxs_saif *master_saif;
u32 scr, stat;
int ret;
+ master_saif = mxs_saif_get_master(saif);
+ if (!master_saif)
+ return -EINVAL;
+
/* mclk should already be set */
if (!saif->mclk && saif->mclk_in_use) {
dev_err(cpu_dai->dev, "set mclk first\n");
return ret;
}
+ /* prepare clk in hw_param, enable in trigger */
+ clk_prepare(saif->clk);
+ if (saif != master_saif) {
+ /*
+ * Set an initial clock rate for the saif internal logic to work
+ * properly. This is important when working in EXTMASTER mode
+ * that uses the other saif's BITCLK&LRCLK but it still needs a
+ * basic clock which should be fast enough for the internal
+ * logic.
+ */
+ clk_enable(saif->clk);
+ ret = clk_set_rate(saif->clk, 24000000);
+ clk_disable(saif->clk);
+ if (ret)
+ return ret;
+
+ clk_prepare(master_saif->clk);
+ }
+
scr = __raw_readl(saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-mcbsp");
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-pcm-audio");
}
/* If the driver didn't set I/O up try regmap */
- if (!codec->control_data)
+ if (!codec->write && dev_get_regmap(codec->dev, NULL))
snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP);
if (driver->controls)
}
alc5632->gpio_hp_det = of_get_named_gpio(np, "nvidia,hp-det-gpios", 0);
- if (alc5632->gpio_hp_det == -ENODEV)
+ if (alc5632->gpio_hp_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
ret = snd_soc_of_parse_card_name(card, "nvidia,model");
} else if (np) {
pdata->gpio_spkr_en = of_get_named_gpio(np,
"nvidia,spkr-en-gpios", 0);
- if (pdata->gpio_spkr_en == -ENODEV)
+ if (pdata->gpio_spkr_en == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_hp_mute = of_get_named_gpio(np,
"nvidia,hp-mute-gpios", 0);
- if (pdata->gpio_hp_mute == -ENODEV)
+ if (pdata->gpio_hp_mute == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_hp_det = of_get_named_gpio(np,
"nvidia,hp-det-gpios", 0);
- if (pdata->gpio_hp_det == -ENODEV)
+ if (pdata->gpio_hp_det == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_int_mic_en = of_get_named_gpio(np,
"nvidia,int-mic-en-gpios", 0);
- if (pdata->gpio_int_mic_en == -ENODEV)
+ if (pdata->gpio_int_mic_en == -EPROBE_DEFER)
return -EPROBE_DEFER;
pdata->gpio_ext_mic_en = of_get_named_gpio(np,
"nvidia,ext-mic-en-gpios", 0);
- if (pdata->gpio_ext_mic_en == -ENODEV)
+ if (pdata->gpio_ext_mic_en == -EPROBE_DEFER)
return -EPROBE_DEFER;
}
#include <linux/mfd/dbx500-prcmu.h>
#include <mach/hardware.h>
-#include <mach/board-mop500-msp.h>
+#include <mach/msp.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/board-mop500-msp.h>
+#include <mach/msp.h>
#include <sound/soc.h>
#include <linux/platform_device.h>
-#include <mach/board-mop500-msp.h>
+#include <mach/msp.h>
#define MSP_INPUT_FREQ_APB 48000000