Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_IMX1_UART
+ bool "i.MX1 Debug UART"
+ depends on SOC_IMX1
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX1.
+
+ config DEBUG_IMX23_UART
+ bool "i.MX23 Debug UART"
+ depends on SOC_IMX23
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX23.
+
+ config DEBUG_IMX25_UART
+ bool "i.MX25 Debug UART"
+ depends on SOC_IMX25
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX25.
+
+ config DEBUG_IMX21_IMX27_UART
+ bool "i.MX21 and i.MX27 Debug UART"
+ depends on SOC_IMX21 || SOC_IMX27
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX21 or i.MX27.
+
+ config DEBUG_IMX28_UART
+ bool "i.MX28 Debug UART"
+ depends on SOC_IMX28
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX28.
+
+ config DEBUG_IMX31_IMX35_UART
+ bool "i.MX31 and i.MX35 Debug UART"
+ depends on SOC_IMX31 || SOC_IMX35
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX31 or i.MX35.
+
+ config DEBUG_IMX51_UART
+ bool "i.MX51 Debug UART"
+ depends on SOC_IMX51
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX51.
+
+ config DEBUG_IMX50_IMX53_UART
+ bool "i.MX50 and i.MX53 Debug UART"
+ depends on SOC_IMX50 || SOC_IMX53
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX50 or i.MX53.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
endchoice
config EARLY_PRINTK
buffer driver that will allow you to collect traces of the
kernel code.
-config DEBUG_S3C_UART
- depends on PLAT_SAMSUNG
- int "S3C UART to use for low-level debug"
- default "0"
- help
- Choice for UART for kernel low-level using S3C UARTS,
- should be between zero and two. The port must have been
- initialised by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config ARM_KPROBES_TEST
tristate "Kprobes test module"
depends on KPROBES && MODULES
* published by the Free Software Foundation.
*/
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
- defined(CONFIG_MACH_REALVIEW_PB11MP) || \
- defined(CONFIG_MACH_REALVIEW_PBA8) || \
- defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
#define DEBUG_LL_UART_OFFSET 0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
#define DEBUG_LL_UART_OFFSET 0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
#endif
#ifndef DEBUG_LL_UART_OFFSET
*/
#include <mach/hardware.h>
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
#define UART_PADDR MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
#endif