net/usb: add relative mii functions for r815x
authorhayeswang <hayeswang@realtek.com>
Mon, 8 Jul 2013 02:41:21 +0000 (10:41 +0800)
committerDavid S. Miller <davem@davemloft.net>
Fri, 12 Jul 2013 00:11:01 +0000 (17:11 -0700)
Base on cdc_ether, add the mii functions for RTL8152 and RTL8153.
The RTL8152 and RTL8153 support ECM mode which use the driver of
cdc_ether. Add the mii functions. Then, the basic PHY access is
possible.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/usb/Makefile
drivers/net/usb/cdc_ether.c
drivers/net/usb/r815x.c [new file with mode: 0644]

index 9ab5c9d4b45a508d38f57301ffa609e527ddb84e..e8171784529d5de3dff43f9ce34fafa0a3235409 100644 (file)
@@ -11,7 +11,7 @@ obj-$(CONFIG_USB_HSO)         += hso.o
 obj-$(CONFIG_USB_NET_AX8817X)  += asix.o
 asix-y := asix_devices.o asix_common.o ax88172a.o
 obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179_178a.o
-obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o
 obj-$(CONFIG_USB_NET_CDC_EEM)  += cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)   += dm9601.o
 obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
index 4393f148312629ba5b93426d4e4e55d7ddd221a0..03ad4dc293aa2a468f8a93f0a0d045623507a9a0 100644 (file)
@@ -646,13 +646,18 @@ static const struct usb_device_id products [] = {
 },
 
 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
-#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)
 {
        USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
                        USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
        .driver_info = 0,
 },
-#endif
+
+/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
+{
+       USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
+                       USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+       .driver_info = 0,
+},
 
 /*
  * WHITELIST!!!
diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c
new file mode 100644 (file)
index 0000000..6516737
--- /dev/null
@@ -0,0 +1,231 @@
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+#define RTL815x_REQT_READ      0xc0
+#define RTL815x_REQT_WRITE     0x40
+#define RTL815x_REQ_GET_REGS   0x05
+#define RTL815x_REQ_SET_REGS   0x05
+
+#define MCU_TYPE_PLA           0x0100
+#define OCP_BASE               0xe86c
+#define BASE_MII               0xa400
+
+#define BYTE_EN_DWORD          0xff
+#define BYTE_EN_WORD           0x33
+#define BYTE_EN_BYTE           0x11
+
+#define R815x_PHY_ID           32
+#define REALTEK_VENDOR_ID      0x0bda
+
+
+static int pla_read_word(struct usb_device *udev, u16 index)
+{
+       int data, ret;
+       u8 shift = index & 2;
+
+       index &= ~3;
+
+       ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+                             RTL815x_REQ_GET_REGS, RTL815x_REQT_READ,
+                             index, MCU_TYPE_PLA, &data, sizeof(data), 500);
+       if (ret < 0)
+               return ret;
+
+       data = __le32_to_cpu(data);
+       data >>= (shift * 8);
+       data &= 0xffff;
+
+       return data;
+}
+
+static int pla_write_word(struct usb_device *udev, u16 index, u32 data)
+{
+       u32 tmp, mask = 0xffff;
+       u16 byen = BYTE_EN_WORD;
+       u8 shift = index & 2;
+       int ret;
+
+       data &= mask;
+
+       if (shift) {
+               byen <<= shift;
+               mask <<= (shift * 8);
+               data <<= (shift * 8);
+               index &= ~3;
+       }
+
+       ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+                             RTL815x_REQ_GET_REGS, RTL815x_REQT_READ,
+                             index, MCU_TYPE_PLA, &tmp, sizeof(tmp), 500);
+       if (ret < 0)
+               return ret;
+
+       tmp = __le32_to_cpu(tmp) & ~mask;
+       tmp |= data;
+       tmp = __cpu_to_le32(tmp);
+
+       ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+                             RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE,
+                             index, MCU_TYPE_PLA | byen, &tmp,
+                             sizeof(tmp), 500);
+
+       return ret;
+}
+
+static int ocp_reg_read(struct usbnet *dev, u16 addr)
+{
+       u16 ocp_base, ocp_index;
+       int ret;
+
+       ocp_base = addr & 0xf000;
+       ret = pla_write_word(dev->udev, OCP_BASE, ocp_base);
+       if (ret < 0)
+               goto out;
+
+       ocp_index = (addr & 0x0fff) | 0xb000;
+       ret = pla_read_word(dev->udev, ocp_index);
+
+out:
+       return ret;
+}
+
+static int ocp_reg_write(struct usbnet *dev, u16 addr, u16 data)
+{
+       u16 ocp_base, ocp_index;
+       int ret;
+
+       ocp_base = addr & 0xf000;
+       ret = pla_write_word(dev->udev, OCP_BASE, ocp_base);
+       if (ret < 0)
+               goto out1;
+
+       ocp_index = (addr & 0x0fff) | 0xb000;
+       ret = pla_write_word(dev->udev, ocp_index, data);
+
+out1:
+       return ret;
+}
+
+static int r815x_mdio_read(struct net_device *netdev, int phy_id, int reg)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+
+       if (phy_id != R815x_PHY_ID)
+               return -EINVAL;
+
+       return ocp_reg_read(dev, BASE_MII + reg * 2);
+}
+
+static
+void r815x_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+
+       if (phy_id != R815x_PHY_ID)
+               return;
+
+       ocp_reg_write(dev, BASE_MII + reg * 2, val);
+}
+
+static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+       int status;
+
+       status = usbnet_cdc_bind(dev, intf);
+       if (status < 0)
+               return status;
+
+       dev->mii.dev = dev->net;
+       dev->mii.mdio_read = r815x_mdio_read;
+       dev->mii.mdio_write = r815x_mdio_write;
+       dev->mii.phy_id_mask = 0x3f;
+       dev->mii.reg_num_mask = 0x1f;
+       dev->mii.phy_id = R815x_PHY_ID;
+       dev->mii.supports_gmii = 1;
+
+       return 0;
+}
+
+static int r8152_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+       int status;
+
+       status = usbnet_cdc_bind(dev, intf);
+       if (status < 0)
+               return status;
+
+       dev->mii.dev = dev->net;
+       dev->mii.mdio_read = r815x_mdio_read;
+       dev->mii.mdio_write = r815x_mdio_write;
+       dev->mii.phy_id_mask = 0x3f;
+       dev->mii.reg_num_mask = 0x1f;
+       dev->mii.phy_id = R815x_PHY_ID;
+       dev->mii.supports_gmii = 0;
+
+       return 0;
+}
+
+static const struct driver_info r8152_info = {
+       .description =  "RTL8152 ECM Device",
+       .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
+       .bind =         r8152_bind,
+       .unbind =       usbnet_cdc_unbind,
+       .status =       usbnet_cdc_status,
+       .manage_power = usbnet_manage_power,
+};
+
+static const struct driver_info r8153_info = {
+       .description =  "RTL8153 ECM Device",
+       .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
+       .bind =         r8153_bind,
+       .unbind =       usbnet_cdc_unbind,
+       .status =       usbnet_cdc_status,
+       .manage_power = usbnet_manage_power,
+};
+
+static const struct usb_device_id products[] = {
+{
+       USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
+                       USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)
+       .driver_info = 0,
+#else
+       .driver_info = (unsigned long) &r8152_info,
+#endif
+},
+
+{
+       USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
+                       USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+#if defined(CONFIG_USB_RTL8153) || defined(CONFIG_USB_RTL8153_MODULE)
+       .driver_info = 0,
+#else
+       .driver_info = (unsigned long) &r8153_info,
+#endif
+},
+
+       { },            /* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver r815x_driver = {
+       .name =         "r815x",
+       .id_table =     products,
+       .probe =        usbnet_probe,
+       .disconnect =   usbnet_disconnect,
+       .suspend =      usbnet_suspend,
+       .resume =       usbnet_resume,
+       .reset_resume = usbnet_resume,
+       .supports_autosuspend = 1,
+       .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(r815x_driver);
+
+MODULE_AUTHOR("Hayes Wang");
+MODULE_DESCRIPTION("Realtek USB ECM device");
+MODULE_LICENSE("GPL");