pinctrl: lpc18xx: add support for usb1 pinconf
authorJoachim Eastwood <manabian@gmail.com>
Tue, 14 Jul 2015 22:25:27 +0000 (00:25 +0200)
committerLinus Walleij <linus.walleij@linaro.org>
Fri, 17 Jul 2015 12:23:15 +0000 (14:23 +0200)
The dedicated USB1 pins can be configured with pull-down and
for low power mode (suspend). Add support for this in the
pinctrl driver.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/pinctrl-lpc18xx.c

index ef0b697639a71e397ec545d17f6fe9ae9cec445d..e56f9203cc872e62c7c6c5224f51f852a6d49bec 100644 (file)
@@ -37,6 +37,9 @@
 #define LPC18XX_SCU_PIN_EHD_MASK       0x300
 #define LPC18XX_SCU_PIN_EHD_POS                8
 
+#define LPC18XX_SCU_USB1_EPD           BIT(2)
+#define LPC18XX_SCU_USB1_EPWR          BIT(4)
+
 #define LPC18XX_SCU_I2C0_EFP           BIT(0)
 #define LPC18XX_SCU_I2C0_EHD           BIT(2)
 #define LPC18XX_SCU_I2C0_EZI           BIT(3)
@@ -617,8 +620,31 @@ static const struct pinctrl_pin_desc lpc18xx_pins[] = {
 
 static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg)
 {
-       /* TODO */
-       return -ENOTSUPP;
+       switch (param) {
+       case PIN_CONFIG_LOW_POWER_MODE:
+               if (reg & LPC18XX_SCU_USB1_EPWR)
+                       *arg = 0;
+               else
+                       *arg = 1;
+               break;
+
+       case PIN_CONFIG_BIAS_DISABLE:
+               if (reg & LPC18XX_SCU_USB1_EPD)
+                       return -EINVAL;
+               break;
+
+       case PIN_CONFIG_BIAS_PULL_DOWN:
+               if (reg & LPC18XX_SCU_USB1_EPD)
+                       *arg = 1;
+               else
+                       return -EINVAL;
+               break;
+
+       default:
+               return -ENOTSUPP;
+       }
+
+       return 0;
 }
 
 static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg,
@@ -782,8 +808,28 @@ static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev,
                                  enum pin_config_param param,
                                  u16 param_val, u32 *reg)
 {
-       /* TODO */
-       return -ENOTSUPP;
+       switch (param) {
+       case PIN_CONFIG_LOW_POWER_MODE:
+               if (param_val)
+                       *reg &= ~LPC18XX_SCU_USB1_EPWR;
+               else
+                       *reg |= LPC18XX_SCU_USB1_EPWR;
+               break;
+
+       case PIN_CONFIG_BIAS_DISABLE:
+               *reg &= ~LPC18XX_SCU_USB1_EPD;
+               break;
+
+       case PIN_CONFIG_BIAS_PULL_DOWN:
+               *reg |= LPC18XX_SCU_USB1_EPD;
+               break;
+
+       default:
+               dev_err(pctldev->dev, "Property not supported\n");
+               return -ENOTSUPP;
+       }
+
+       return 0;
 }
 
 static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev,