/* Per channel configuration registers */
-#define PL008_Cx_STRIDE (0x20)
+#define PL080_Cx_STRIDE (0x20)
#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
#define PL080_CONTROL_PROT_MASK (0x7 << 28)
#define PL080_CONTROL_PROT_SHIFT (28)
+#define PL080_CONTROL_PROT_CACHE (1 << 30)
+#define PL080_CONTROL_PROT_BUFF (1 << 29)
#define PL080_CONTROL_PROT_SYS (1 << 28)
#define PL080_CONTROL_DST_INCR (1 << 27)
#define PL080_CONTROL_SRC_INCR (1 << 26)
help
Machine support for the A&W6410
+config MACH_REAL6410
+ bool "REAL6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_SDHCI
+ help
+ Machine support for the CoreWind REAL6410
+
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
chptr->number = chno;
chptr->dmac = dmac;
chptr->regs = regptr;
- regptr += PL008_Cx_STRIDE;
+ regptr += PL080_Cx_STRIDE;
}
/* for the moment, permanently enable the controller */
#define PHYS_OFFSET UL(0x50000000)
+#define CONSISTENT_DMA_SIZE SZ_8M
+
#endif
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-real6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/dm9000.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/map.h>
+#include <mach/s3c6410.h>
+#include <mach/regs-srom.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource real6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN1,
+ .end = S3C64XX_PA_XM0CSN1 + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN1 + 4,
+ .end = S3C64XX_PA_XM0CSN1 + 5,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = S3C_EINT(7),
+ .end = S3C_EINT(7),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct dm9000_plat_data real6410_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device real6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(real6410_dm9k_resource),
+ .resource = real6410_dm9k_resource,
+ .dev = {
+ .platform_data = &real6410_dm9k_pdata,
+ },
+};
+
+static struct platform_device *real6410_devices[] __initdata = {
+ &real6410_device_eth,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+};
+
+static void __init real6410_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+}
+
+static void __init real6410_machine_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
+}
+
+MACHINE_START(REAL6410, "REAL6410")
+ /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6410_init_irq,
+ .map_io = real6410_map_io,
+ .init_machine = real6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
+#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
.max_width = 4,
- /*.broken_card_detection = true,*/
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
},
};
+static int __init smartq_lcd_setup_gpio(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+ if (ret < 0)
+ return ret;
+
+ /* turn power off */
+ gpio_direction_output(S3C64XX_GPM(3), 0);
+
+ return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+ .sck = S3C64XX_GPM(1),
+ .mosi = S3C64XX_GPM(2),
+ .miso = S3C64XX_GPM(2),
+};
+
+static struct platform_device smartq_lcd_control_device = {
+ .name = "spi-gpio",
+ .id = 1,
+ .dev.platform_data = &smartq_lcd_control,
+};
+
static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{
gpio_direction_output(S3C64XX_GPM(3), power);
.dev.platform_data = &smartq_lcd_power_data,
};
+static struct i2c_board_info smartq_i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8987", 0x1a), },
+};
static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_hsmmc1, /* Init iNAND first, ... */
&s3c_device_timer[1],
&s3c_device_ts,
&s3c_device_usb_hsotg,
+ &s3c64xx_device_iis0,
&smartq_backlight_device,
+ &smartq_lcd_control_device,
&smartq_lcd_power_device,
&smartq_usb_otg_vbus_dev,
};
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);
-
pm_power_off = smartq_power_off;
return ret;
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ i2c_register_board_info(0, smartq_i2c_devs,
+ ARRAY_SIZE(smartq_i2c_devs));
+
+ WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_usb_otg_init());
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include "mach-smartq.h"
-static void __init smartq5_lcd_setup_gpio(void)
-{
- gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
- gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
- gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
- gpio_request(S3C64XX_GPM(3), "LCD power");
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_direction_input(S3C64XX_GPM(1));
- gpio_direction_input(S3C64XX_GPM(2));
- gpio_direction_output(S3C64XX_GPM(3), 0);
-}
-
-static struct i2c_gpio_platform_data smartq5_lcd_control = {
- .sda_pin = S3C64XX_GPM(2),
- .scl_pin = S3C64XX_GPM(1),
-};
-
-static struct platform_device smartq5_lcd_control_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &smartq5_lcd_control,
-};
-
static struct gpio_led smartq5_leds[] __initdata = {
{
.name = "smartq5:green",
static struct s3c_fb_pd_win smartq5_fb_win0 = {
.win_mode = {
- .left_margin = 40,
- .right_margin = 216,
- .upper_margin = 10,
- .lower_margin = 35,
+ .left_margin = 216,
+ .right_margin = 40,
+ .upper_margin = 35,
+ .lower_margin = 10,
.hsync_len = 1,
.vsync_len = 1,
.xres = 800,
static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device,
&smartq5_buttons_device,
- &smartq5_lcd_control_device,
};
static void __init smartq5_machine_init(void)
s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init();
- smartq5_lcd_setup_gpio();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
}
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include "mach-smartq.h"
-static void __init smartq7_lcd_setup_gpio(void)
-{
- gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
- gpio_request(S3C64XX_GPM(3), "LCD power");
- gpio_request(S3C64XX_GPM(4), "LCD power status");
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_direction_output(S3C64XX_GPM(3), 0);
- gpio_direction_input(S3C64XX_GPM(4));
-}
-
-static struct i2c_gpio_platform_data smartq7_lcd_control = {
- .sda_pin = S3C64XX_GPM(2),
- .scl_pin = S3C64XX_GPM(1),
- .sda_is_open_drain = 1,
- .scl_is_open_drain = 1,
-};
-
-static struct platform_device smartq7_lcd_control_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &smartq7_lcd_control,
-};
-
static struct gpio_led smartq7_leds[] __initdata = {
{
.name = "smartq7:red",
static struct platform_device *smartq7_devices[] __initdata = {
&smartq7_leds_device,
&smartq7_buttons_device,
- &smartq7_lcd_control_device,
};
static void __init smartq7_machine_init(void)
s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init();
- smartq7_lcd_setup_gpio();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
}
},
.max_bpp = 32,
.default_bpp = 16,
+ .virtual_y = 480 * 2,
+ .virtual_x = 800,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
config PLAT_SAMSUNG
bool
- depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
select NO_IOPORT
default y
help
projects / firefly-linux-kernel-4.4.55.git / commitdiff