Merge branch 'u300' into devel
authorRussell King <rmk@dyn-67.arm.linux.org.uk>
Sun, 14 Jun 2009 10:01:44 +0000 (11:01 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sun, 14 Jun 2009 10:01:44 +0000 (11:01 +0100)
Conflicts:
arch/arm/Makefile
Updates:
arch/arm/mach-u300/core.c
arch/arm/mach-u300/timer.c

1  2 
arch/arm/Kconfig
arch/arm/Makefile
arch/arm/mach-u300/core.c
arch/arm/mach-u300/timer.c
arch/arm/mm/mmu.c

Simple merge
index 2f3cac809e3148944fdb052b4241b997c6400f17,20084c50c23c7946269a9da84064535e2976b5bb..c877d6df23d116286d17e51429058135f022de70
@@@ -152,8 -149,7 +152,9 @@@ machine-$(CONFIG_ARCH_S3C24A0)             := s3c2
  machine-$(CONFIG_ARCH_S3C64XX)                := s3c6400 s3c6410
  machine-$(CONFIG_ARCH_SA1100)         := sa1100
  machine-$(CONFIG_ARCH_SHARK)          := shark
 +machine-$(CONFIG_ARCH_STMP378X)               := stmp378x
 +machine-$(CONFIG_ARCH_STMP37XX)               := stmp37xx
+ machine-$(CONFIG_ARCH_U300)           := u300
  machine-$(CONFIG_ARCH_VERSATILE)      := versatile
  machine-$(CONFIG_ARCH_W90X900)                := w90x900
  machine-$(CONFIG_FOOTBRIDGE)          := footbridge
index 0000000000000000000000000000000000000000,1f2ed21a0ab1461a5c9cb33eae8519f9c57012b0..89b3ccf35e1bbf74740c2c856f03ad908b694fe9
mode 000000,100644..100644
--- /dev/null
@@@ -1,0 -1,649 +1,649 @@@
 -      vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0]);
 -      vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1]);
+ /*
+  *
+  * arch/arm/mach-u300/core.c
+  *
+  *
+  * Copyright (C) 2007-2009 ST-Ericsson AB
+  * License terms: GNU General Public License (GPL) version 2
+  * Core platform support, IRQ handling and device definitions.
+  * Author: Linus Walleij <linus.walleij@stericsson.com>
+  */
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/spinlock.h>
+ #include <linux/interrupt.h>
+ #include <linux/bitops.h>
+ #include <linux/device.h>
+ #include <linux/mm.h>
+ #include <linux/termios.h>
+ #include <linux/amba/bus.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
+ #include <asm/types.h>
+ #include <asm/setup.h>
+ #include <asm/memory.h>
+ #include <asm/hardware/vic.h>
+ #include <asm/mach/map.h>
+ #include <asm/mach/irq.h>
+ #include <mach/hardware.h>
+ #include <mach/syscon.h>
+ #include "clock.h"
+ #include "mmc.h"
+ /*
+  * Static I/O mappings that are needed for booting the U300 platforms. The
+  * only things we need are the areas where we find the timer, syscon and
+  * intcon, since the remaining device drivers will map their own memory
+  * physical to virtual as the need arise.
+  */
+ static struct map_desc u300_io_desc[] __initdata = {
+       {
+               .virtual        = U300_SLOW_PER_VIRT_BASE,
+               .pfn            = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+               .length         = SZ_64K,
+               .type           = MT_DEVICE,
+       },
+       {
+               .virtual        = U300_AHB_PER_VIRT_BASE,
+               .pfn            = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+               .length         = SZ_32K,
+               .type           = MT_DEVICE,
+       },
+       {
+               .virtual        = U300_FAST_PER_VIRT_BASE,
+               .pfn            = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+               .length         = SZ_32K,
+               .type           = MT_DEVICE,
+       },
+       {
+               .virtual        = 0xffff2000, /* TCM memory */
+               .pfn            = __phys_to_pfn(0xffff2000),
+               .length         = SZ_16K,
+               .type           = MT_DEVICE,
+       },
+       /*
+        * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+        * may have to be moved to 0x00000000 in order to use the ROM.
+        */
+       /*
+       {
+               .virtual        = U300_BOOTROM_VIRT_BASE,
+               .pfn            = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+               .length         = SZ_64K,
+               .type           = MT_ROM,
+       },
+       */
+ };
+ void __init u300_map_io(void)
+ {
+       iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+ }
+ /*
+  * Declaration of devices found on the U300 board and
+  * their respective memory locations.
+  */
+ static struct amba_device uart0_device = {
+       .dev = {
+               .init_name = "uart0", /* Slow device at 0x3000 offset */
+               .platform_data = NULL,
+       },
+       .res = {
+               .start = U300_UART0_BASE,
+               .end   = U300_UART0_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       .irq = { IRQ_U300_UART0, NO_IRQ },
+ };
+ /* The U335 have an additional UART1 on the APP CPU */
+ #ifdef CONFIG_MACH_U300_BS335
+ static struct amba_device uart1_device = {
+       .dev = {
+               .init_name = "uart1", /* Fast device at 0x7000 offset */
+               .platform_data = NULL,
+       },
+       .res = {
+               .start = U300_UART1_BASE,
+               .end   = U300_UART1_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       .irq = { IRQ_U300_UART1, NO_IRQ },
+ };
+ #endif
+ static struct amba_device pl172_device = {
+       .dev = {
+               .init_name = "pl172", /* AHB device at 0x4000 offset */
+               .platform_data = NULL,
+       },
+       .res = {
+               .start = U300_EMIF_CFG_BASE,
+               .end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+ };
+ /*
+  * Everything within this next ifdef deals with external devices connected to
+  * the APP SPI bus.
+  */
+ static struct amba_device pl022_device = {
+       .dev = {
+               .coherent_dma_mask = ~0,
+               .init_name = "pl022", /* Fast device at 0x6000 offset */
+       },
+       .res = {
+               .start = U300_SPI_BASE,
+               .end   = U300_SPI_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       .irq = {IRQ_U300_SPI, NO_IRQ },
+       /*
+        * This device has a DMA channel but the Linux driver does not use
+        * it currently.
+        */
+ };
+ static struct amba_device mmcsd_device = {
+       .dev = {
+               .init_name = "mmci", /* Fast device at 0x1000 offset */
+               .platform_data = NULL, /* Added later */
+       },
+       .res = {
+               .start = U300_MMCSD_BASE,
+               .end   = U300_MMCSD_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+       /*
+        * This device has a DMA channel but the Linux driver does not use
+        * it currently.
+        */
+ };
+ /*
+  * The order of device declaration may be important, since some devices
+  * have dependencies on other devices being initialized first.
+  */
+ static struct amba_device *amba_devs[] __initdata = {
+       &uart0_device,
+ #ifdef CONFIG_MACH_U300_BS335
+       &uart1_device,
+ #endif
+       &pl022_device,
+       &pl172_device,
+       &mmcsd_device,
+ };
+ /* Here follows a list of all hw resources that the platform devices
+  * allocate. Note, clock dependencies are not included
+  */
+ static struct resource gpio_resources[] = {
+       {
+               .start = U300_GPIO_BASE,
+               .end   = (U300_GPIO_BASE + SZ_4K - 1),
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .name  = "gpio0",
+               .start = IRQ_U300_GPIO_PORT0,
+               .end   = IRQ_U300_GPIO_PORT0,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "gpio1",
+               .start = IRQ_U300_GPIO_PORT1,
+               .end   = IRQ_U300_GPIO_PORT1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "gpio2",
+               .start = IRQ_U300_GPIO_PORT2,
+               .end   = IRQ_U300_GPIO_PORT2,
+               .flags = IORESOURCE_IRQ,
+       },
+ #ifdef U300_COH901571_3
+       {
+               .name  = "gpio3",
+               .start = IRQ_U300_GPIO_PORT3,
+               .end   = IRQ_U300_GPIO_PORT3,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "gpio4",
+               .start = IRQ_U300_GPIO_PORT4,
+               .end   = IRQ_U300_GPIO_PORT4,
+               .flags = IORESOURCE_IRQ,
+       },
+ #ifdef CONFIG_MACH_U300_BS335
+       {
+               .name  = "gpio5",
+               .start = IRQ_U300_GPIO_PORT5,
+               .end   = IRQ_U300_GPIO_PORT5,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "gpio6",
+               .start = IRQ_U300_GPIO_PORT6,
+               .end   = IRQ_U300_GPIO_PORT6,
+               .flags = IORESOURCE_IRQ,
+       },
+ #endif /* CONFIG_MACH_U300_BS335 */
+ #endif /* U300_COH901571_3 */
+ };
+ static struct resource keypad_resources[] = {
+       {
+               .start = U300_KEYPAD_BASE,
+               .end   = U300_KEYPAD_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .name  = "coh901461-press",
+               .start = IRQ_U300_KEYPAD_KEYBF,
+               .end   = IRQ_U300_KEYPAD_KEYBF,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "coh901461-release",
+               .start = IRQ_U300_KEYPAD_KEYBR,
+               .end   = IRQ_U300_KEYPAD_KEYBR,
+               .flags = IORESOURCE_IRQ,
+       },
+ };
+ static struct resource rtc_resources[] = {
+       {
+               .start = U300_RTC_BASE,
+               .end   = U300_RTC_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_U300_RTC,
+               .end   = IRQ_U300_RTC,
+               .flags = IORESOURCE_IRQ,
+       },
+ };
+ /*
+  * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+  * but these are not yet used by the driver.
+  */
+ static struct resource fsmc_resources[] = {
+       {
+               .start = U300_NAND_IF_PHYS_BASE,
+               .end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+ };
+ static struct resource i2c0_resources[] = {
+       {
+               .start = U300_I2C0_BASE,
+               .end   = U300_I2C0_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_U300_I2C0,
+               .end   = IRQ_U300_I2C0,
+               .flags = IORESOURCE_IRQ,
+       },
+ };
+ static struct resource i2c1_resources[] = {
+       {
+               .start = U300_I2C1_BASE,
+               .end   = U300_I2C1_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_U300_I2C1,
+               .end   = IRQ_U300_I2C1,
+               .flags = IORESOURCE_IRQ,
+       },
+ };
+ static struct resource wdog_resources[] = {
+       {
+               .start = U300_WDOG_BASE,
+               .end   = U300_WDOG_BASE + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_U300_WDOG,
+               .end   = IRQ_U300_WDOG,
+               .flags = IORESOURCE_IRQ,
+       }
+ };
+ /* TODO: These should be protected by suitable #ifdef's */
+ static struct resource ave_resources[] = {
+       {
+               .name  = "AVE3e I/O Area",
+               .start = U300_VIDEOENC_BASE,
+               .end   = U300_VIDEOENC_BASE + SZ_512K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .name  = "AVE3e IRQ0",
+               .start = IRQ_U300_VIDEO_ENC_0,
+               .end   = IRQ_U300_VIDEO_ENC_0,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "AVE3e IRQ1",
+               .start = IRQ_U300_VIDEO_ENC_1,
+               .end   = IRQ_U300_VIDEO_ENC_1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .name  = "AVE3e Physmem Area",
+               .start = 0, /* 0 will be remapped to reserved memory */
+               .end   = SZ_1M - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       /*
+        * The AVE3e requires two regions of 256MB that it considers
+        * "invisible". The hardware will not be able to access these
+        * adresses, so they should never point to system RAM.
+        */
+       {
+               .name  = "AVE3e Reserved 0",
+               .start = 0xd0000000,
+               .end   = 0xd0000000 + SZ_256M - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .name  = "AVE3e Reserved 1",
+               .start = 0xe0000000,
+               .end   = 0xe0000000 + SZ_256M - 1,
+               .flags = IORESOURCE_MEM,
+       },
+ };
+ static struct platform_device wdog_device = {
+       .name = "wdog",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(wdog_resources),
+       .resource = wdog_resources,
+ };
+ static struct platform_device i2c0_device = {
+       .name = "stddci2c",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(i2c0_resources),
+       .resource = i2c0_resources,
+ };
+ static struct platform_device i2c1_device = {
+       .name = "stddci2c",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(i2c1_resources),
+       .resource = i2c1_resources,
+ };
+ static struct platform_device gpio_device = {
+       .name = "u300-gpio",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(gpio_resources),
+       .resource = gpio_resources,
+ };
+ static struct platform_device keypad_device = {
+       .name = "keypad",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(keypad_resources),
+       .resource = keypad_resources,
+ };
+ static struct platform_device rtc_device = {
+       .name = "rtc0",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(rtc_resources),
+       .resource = rtc_resources,
+ };
+ static struct platform_device fsmc_device = {
+       .name = "nandif",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(fsmc_resources),
+       .resource = fsmc_resources,
+ };
+ static struct platform_device ave_device = {
+       .name = "video_enc",
+       .id = -1,
+       .num_resources = ARRAY_SIZE(ave_resources),
+       .resource = ave_resources,
+ };
+ /*
+  * Notice that AMBA devices are initialized before platform devices.
+  *
+  */
+ static struct platform_device *platform_devs[] __initdata = {
+       &i2c0_device,
+       &i2c1_device,
+       &keypad_device,
+       &rtc_device,
+       &gpio_device,
+       &fsmc_device,
+       &wdog_device,
+       &ave_device
+ };
+ /*
+  * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+  * together so some interrupts are connected to the first one and some
+  * to the second one.
+  */
+ void __init u300_init_irq(void)
+ {
+       u32 mask[2] = {0, 0};
+       int i;
+       for (i = 0; i < NR_IRQS; i++)
+               set_bit(i, (unsigned long *) &mask[0]);
+       u300_enable_intcon_clock();
++      vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
++      vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+ }
+ /*
+  * U300 platforms peripheral handling
+  */
+ struct db_chip {
+       u16 chipid;
+       const char *name;
+ };
+ /*
+  * This is a list of the Digital Baseband chips used in the U300 platform.
+  */
+ static struct db_chip db_chips[] __initdata = {
+       {
+               .chipid = 0xb800,
+               .name = "DB3000",
+       },
+       {
+               .chipid = 0xc000,
+               .name = "DB3100",
+       },
+       {
+               .chipid = 0xc800,
+               .name = "DB3150",
+       },
+       {
+               .chipid = 0xd800,
+               .name = "DB3200",
+       },
+       {
+               .chipid = 0xe000,
+               .name = "DB3250",
+       },
+       {
+               .chipid = 0xe800,
+               .name = "DB3210",
+       },
+       {
+               .chipid = 0xf000,
+               .name = "DB3350 P1x",
+       },
+       {
+               .chipid = 0xf100,
+               .name = "DB3350 P2x",
+       },
+       {
+               .chipid = 0x0000, /* List terminator */
+               .name = NULL,
+       }
+ };
+ static void u300_init_check_chip(void)
+ {
+       u16 val;
+       struct db_chip *chip;
+       const char *chipname;
+       const char unknown[] = "UNKNOWN";
+       /* Read out and print chip ID */
+       val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+       /* This is in funky bigendian order... */
+       val = (val & 0xFFU) << 8 | (val >> 8);
+       chip = db_chips;
+       chipname = unknown;
+       for ( ; chip->chipid; chip++) {
+               if (chip->chipid == (val & 0xFF00U)) {
+                       chipname = chip->name;
+                       break;
+               }
+       }
+       printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+              "(chip ID 0x%04x)\n", chipname, val);
+ #ifdef CONFIG_MACH_U300_BS26
+       if ((val & 0xFF00U) != 0xc800) {
+               printk(KERN_ERR "Platform configured for BS25/BS26 " \
+                      "with DB3150 but %s detected, expect problems!",
+                      chipname);
+       }
+ #endif
+ #ifdef CONFIG_MACH_U300_BS330
+       if ((val & 0xFF00U) != 0xd800) {
+               printk(KERN_ERR "Platform configured for BS330 " \
+                      "with DB3200 but %s detected, expect problems!",
+                      chipname);
+       }
+ #endif
+ #ifdef CONFIG_MACH_U300_BS335
+       if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+               printk(KERN_ERR "Platform configured for BS365 " \
+                      " with DB3350 but %s detected, expect problems!",
+                      chipname);
+       }
+ #endif
+ #ifdef CONFIG_MACH_U300_BS365
+       if ((val & 0xFF00U) != 0xe800) {
+               printk(KERN_ERR "Platform configured for BS365 " \
+                      "with DB3210 but %s detected, expect problems!",
+                      chipname);
+       }
+ #endif
+ }
+ /*
+  * Some devices and their resources require reserved physical memory from
+  * the end of the available RAM. This function traverses the list of devices
+  * and assigns actual adresses to these.
+  */
+ static void __init u300_assign_physmem(void)
+ {
+       unsigned long curr_start = __pa(high_memory);
+       int i, j;
+       for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+               for (j = 0; j < platform_devs[i]->num_resources; j++) {
+                       struct resource *const res =
+                         &platform_devs[i]->resource[j];
+                       if (IORESOURCE_MEM == res->flags &&
+                                    0 == res->start) {
+                               res->start  = curr_start;
+                               res->end   += curr_start;
+                               curr_start += (res->end - res->start + 1);
+                               printk(KERN_INFO "core.c: Mapping RAM " \
+                                      "%#x-%#x to device %s:%s\n",
+                                       res->start, res->end,
+                                      platform_devs[i]->name, res->name);
+                       }
+               }
+       }
+ }
+ void __init u300_init_devices(void)
+ {
+       int i;
+       u16 val;
+       /* Check what platform we run and print some status information */
+       u300_init_check_chip();
+       /* Set system to run at PLL208, max performance, a known state. */
+       val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+       val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+       writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+       /* Wait for the PLL208 to lock if not locked in yet */
+       while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+                U300_SYSCON_CSR_PLL208_LOCK_IND));
+       /* Register the AMBA devices in the AMBA bus abstraction layer */
+       u300_clock_primecells();
+       for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+               struct amba_device *d = amba_devs[i];
+               amba_device_register(d, &iomem_resource);
+       }
+       u300_unclock_primecells();
+       u300_assign_physmem();
+       /* Register the platform devices */
+       platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+ #ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+       /*
+        * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+        * both subsystems are requesting this mode.
+        * If we not share the Acc SDRAM, this is never the case. Therefore
+        * enable it here from the App side.
+        */
+       val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+               U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+       writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+ #endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+ }
+ static int core_module_init(void)
+ {
+       /*
+        * This needs to be initialized later: it needs the input framework
+        * to be initialized first.
+        */
+       return mmc_init(&mmcsd_device);
+ }
+ module_init(core_module_init);
index 0000000000000000000000000000000000000000,57b5351b181612018bc5ccbf7f298b374b9819c5..cce53204880e70fe8de3fece1ce8264930b60caa
mode 000000,100644..100644
--- /dev/null
@@@ -1,0 -1,422 +1,422 @@@
 -static cycle_t u300_get_cycles(void)
+ /*
+  *
+  * arch/arm/mach-u300/timer.c
+  *
+  *
+  * Copyright (C) 2007-2009 ST-Ericsson AB
+  * License terms: GNU General Public License (GPL) version 2
+  * Timer COH 901 328, runs the OS timer interrupt.
+  * Author: Linus Walleij <linus.walleij@stericsson.com>
+  */
+ #include <linux/interrupt.h>
+ #include <linux/time.h>
+ #include <linux/timex.h>
+ #include <linux/clockchips.h>
+ #include <linux/clocksource.h>
+ #include <linux/types.h>
+ #include <linux/io.h>
+ #include <mach/hardware.h>
+ /* Generic stuff */
+ #include <asm/mach/map.h>
+ #include <asm/mach/time.h>
+ #include <asm/mach/irq.h>
+ #include "clock.h"
+ /*
+  * APP side special timer registers
+  * This timer contains four timers which can fire an interrupt each.
+  * OS (operating system) timer @ 32768 Hz
+  * DD (device driver) timer @ 1 kHz
+  * GP1 (general purpose 1) timer @ 1MHz
+  * GP2 (general purpose 2) timer @ 1MHz
+  */
+ /* Reset OS Timer 32bit (-/W) */
+ #define U300_TIMER_APP_ROST                                   (0x0000)
+ #define U300_TIMER_APP_ROST_TIMER_RESET                               (0x00000000)
+ /* Enable OS Timer 32bit (-/W) */
+ #define U300_TIMER_APP_EOST                                   (0x0004)
+ #define U300_TIMER_APP_EOST_TIMER_ENABLE                      (0x00000000)
+ /* Disable OS Timer 32bit (-/W) */
+ #define U300_TIMER_APP_DOST                                   (0x0008)
+ #define U300_TIMER_APP_DOST_TIMER_DISABLE                     (0x00000000)
+ /* OS Timer Mode Register 32bit (-/W) */
+ #define U300_TIMER_APP_SOSTM                                  (0x000c)
+ #define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS                  (0x00000000)
+ #define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT                    (0x00000001)
+ /* OS Timer Status Register 32bit (R/-) */
+ #define U300_TIMER_APP_OSTS                                   (0x0010)
+ #define U300_TIMER_APP_OSTS_TIMER_STATE_MASK                  (0x0000000F)
+ #define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE                  (0x00000001)
+ #define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE                        (0x00000002)
+ #define U300_TIMER_APP_OSTS_ENABLE_IND                                (0x00000010)
+ #define U300_TIMER_APP_OSTS_MODE_MASK                         (0x00000020)
+ #define U300_TIMER_APP_OSTS_MODE_CONTINUOUS                   (0x00000000)
+ #define U300_TIMER_APP_OSTS_MODE_ONE_SHOT                     (0x00000020)
+ #define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND                   (0x00000040)
+ #define U300_TIMER_APP_OSTS_IRQ_PENDING_IND                   (0x00000080)
+ /* OS Timer Current Count Register 32bit (R/-) */
+ #define U300_TIMER_APP_OSTCC                                  (0x0014)
+ /* OS Timer Terminal Count Register 32bit (R/W) */
+ #define U300_TIMER_APP_OSTTC                                  (0x0018)
+ /* OS Timer Interrupt Enable Register 32bit (-/W) */
+ #define U300_TIMER_APP_OSTIE                                  (0x001c)
+ #define U300_TIMER_APP_OSTIE_IRQ_DISABLE                      (0x00000000)
+ #define U300_TIMER_APP_OSTIE_IRQ_ENABLE                               (0x00000001)
+ /* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+ #define U300_TIMER_APP_OSTIA                                  (0x0020)
+ #define U300_TIMER_APP_OSTIA_IRQ_ACK                          (0x00000080)
+ /* Reset DD Timer 32bit (-/W) */
+ #define U300_TIMER_APP_RDDT                                   (0x0040)
+ #define U300_TIMER_APP_RDDT_TIMER_RESET                               (0x00000000)
+ /* Enable DD Timer 32bit (-/W) */
+ #define U300_TIMER_APP_EDDT                                   (0x0044)
+ #define U300_TIMER_APP_EDDT_TIMER_ENABLE                      (0x00000000)
+ /* Disable DD Timer 32bit (-/W) */
+ #define U300_TIMER_APP_DDDT                                   (0x0048)
+ #define U300_TIMER_APP_DDDT_TIMER_DISABLE                     (0x00000000)
+ /* DD Timer Mode Register 32bit (-/W) */
+ #define U300_TIMER_APP_SDDTM                                  (0x004c)
+ #define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS                  (0x00000000)
+ #define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT                    (0x00000001)
+ /* DD Timer Status Register 32bit (R/-) */
+ #define U300_TIMER_APP_DDTS                                   (0x0050)
+ #define U300_TIMER_APP_DDTS_TIMER_STATE_MASK                  (0x0000000F)
+ #define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE                  (0x00000001)
+ #define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE                        (0x00000002)
+ #define U300_TIMER_APP_DDTS_ENABLE_IND                                (0x00000010)
+ #define U300_TIMER_APP_DDTS_MODE_MASK                         (0x00000020)
+ #define U300_TIMER_APP_DDTS_MODE_CONTINUOUS                   (0x00000000)
+ #define U300_TIMER_APP_DDTS_MODE_ONE_SHOT                     (0x00000020)
+ #define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND                   (0x00000040)
+ #define U300_TIMER_APP_DDTS_IRQ_PENDING_IND                   (0x00000080)
+ /* DD Timer Current Count Register 32bit (R/-) */
+ #define U300_TIMER_APP_DDTCC                                  (0x0054)
+ /* DD Timer Terminal Count Register 32bit (R/W) */
+ #define U300_TIMER_APP_DDTTC                                  (0x0058)
+ /* DD Timer Interrupt Enable Register 32bit (-/W) */
+ #define U300_TIMER_APP_DDTIE                                  (0x005c)
+ #define U300_TIMER_APP_DDTIE_IRQ_DISABLE                      (0x00000000)
+ #define U300_TIMER_APP_DDTIE_IRQ_ENABLE                               (0x00000001)
+ /* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+ #define U300_TIMER_APP_DDTIA                                  (0x0060)
+ #define U300_TIMER_APP_DDTIA_IRQ_ACK                          (0x00000080)
+ /* Reset GP1 Timer 32bit (-/W) */
+ #define U300_TIMER_APP_RGPT1                                  (0x0080)
+ #define U300_TIMER_APP_RGPT1_TIMER_RESET                      (0x00000000)
+ /* Enable GP1 Timer 32bit (-/W) */
+ #define U300_TIMER_APP_EGPT1                                  (0x0084)
+ #define U300_TIMER_APP_EGPT1_TIMER_ENABLE                     (0x00000000)
+ /* Disable GP1 Timer 32bit (-/W) */
+ #define U300_TIMER_APP_DGPT1                                  (0x0088)
+ #define U300_TIMER_APP_DGPT1_TIMER_DISABLE                    (0x00000000)
+ /* GP1 Timer Mode Register 32bit (-/W) */
+ #define U300_TIMER_APP_SGPT1M                                 (0x008c)
+ #define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS                 (0x00000000)
+ #define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT                   (0x00000001)
+ /* GP1 Timer Status Register 32bit (R/-) */
+ #define U300_TIMER_APP_GPT1S                                  (0x0090)
+ #define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK                 (0x0000000F)
+ #define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE                 (0x00000001)
+ #define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE                       (0x00000002)
+ #define U300_TIMER_APP_GPT1S_ENABLE_IND                               (0x00000010)
+ #define U300_TIMER_APP_GPT1S_MODE_MASK                                (0x00000020)
+ #define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS                  (0x00000000)
+ #define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT                    (0x00000020)
+ #define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND                  (0x00000040)
+ #define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND                  (0x00000080)
+ /* GP1 Timer Current Count Register 32bit (R/-) */
+ #define U300_TIMER_APP_GPT1CC                                 (0x0094)
+ /* GP1 Timer Terminal Count Register 32bit (R/W) */
+ #define U300_TIMER_APP_GPT1TC                                 (0x0098)
+ /* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+ #define U300_TIMER_APP_GPT1IE                                 (0x009c)
+ #define U300_TIMER_APP_GPT1IE_IRQ_DISABLE                     (0x00000000)
+ #define U300_TIMER_APP_GPT1IE_IRQ_ENABLE                      (0x00000001)
+ /* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+ #define U300_TIMER_APP_GPT1IA                                 (0x00a0)
+ #define U300_TIMER_APP_GPT1IA_IRQ_ACK                         (0x00000080)
+ /* Reset GP2 Timer 32bit (-/W) */
+ #define U300_TIMER_APP_RGPT2                                  (0x00c0)
+ #define U300_TIMER_APP_RGPT2_TIMER_RESET                      (0x00000000)
+ /* Enable GP2 Timer 32bit (-/W) */
+ #define U300_TIMER_APP_EGPT2                                  (0x00c4)
+ #define U300_TIMER_APP_EGPT2_TIMER_ENABLE                     (0x00000000)
+ /* Disable GP2 Timer 32bit (-/W) */
+ #define U300_TIMER_APP_DGPT2                                  (0x00c8)
+ #define U300_TIMER_APP_DGPT2_TIMER_DISABLE                    (0x00000000)
+ /* GP2 Timer Mode Register 32bit (-/W) */
+ #define U300_TIMER_APP_SGPT2M                                 (0x00cc)
+ #define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS                 (0x00000000)
+ #define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT                   (0x00000001)
+ /* GP2 Timer Status Register 32bit (R/-) */
+ #define U300_TIMER_APP_GPT2S                                  (0x00d0)
+ #define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK                 (0x0000000F)
+ #define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE                 (0x00000001)
+ #define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE                       (0x00000002)
+ #define U300_TIMER_APP_GPT2S_ENABLE_IND                               (0x00000010)
+ #define U300_TIMER_APP_GPT2S_MODE_MASK                                (0x00000020)
+ #define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS                  (0x00000000)
+ #define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT                    (0x00000020)
+ #define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND                  (0x00000040)
+ #define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND                  (0x00000080)
+ /* GP2 Timer Current Count Register 32bit (R/-) */
+ #define U300_TIMER_APP_GPT2CC                                 (0x00d4)
+ /* GP2 Timer Terminal Count Register 32bit (R/W) */
+ #define U300_TIMER_APP_GPT2TC                                 (0x00d8)
+ /* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+ #define U300_TIMER_APP_GPT2IE                                 (0x00dc)
+ #define U300_TIMER_APP_GPT2IE_IRQ_DISABLE                     (0x00000000)
+ #define U300_TIMER_APP_GPT2IE_IRQ_ENABLE                      (0x00000001)
+ /* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+ #define U300_TIMER_APP_GPT2IA                                 (0x00e0)
+ #define U300_TIMER_APP_GPT2IA_IRQ_ACK                         (0x00000080)
+ /* Clock request control register - all four timers */
+ #define U300_TIMER_APP_CRC                                    (0x100)
+ #define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE                       (0x00000001)
+ #define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+ #define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+ /*
+  * The u300_set_mode() function is always called first, if we
+  * have oneshot timer active, the oneshot scheduling function
+  * u300_set_next_event() is called immediately after.
+  */
+ static void u300_set_mode(enum clock_event_mode mode,
+                         struct clock_event_device *evt)
+ {
+       switch (mode) {
+       case CLOCK_EVT_MODE_PERIODIC:
+               /* Disable interrupts on GPT1 */
+               writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+               /* Disable GP1 while we're reprogramming it. */
+               writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+               /*
+                * Set the periodic mode to a certain number of ticks per
+                * jiffy.
+                */
+               writel(TICKS_PER_JIFFY,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+               /*
+                * Set continuous mode, so the timer keeps triggering
+                * interrupts.
+                */
+               writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+               /* Enable timer interrupts */
+               writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+               /* Then enable the OS timer again */
+               writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+               break;
+       case CLOCK_EVT_MODE_ONESHOT:
+               /* Just break; here? */
+               /*
+                * The actual event will be programmed by the next event hook,
+                * so we just set a dummy value somewhere at the end of the
+                * universe here.
+                */
+               /* Disable interrupts on GPT1 */
+               writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+               /* Disable GP1 while we're reprogramming it. */
+               writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+               /*
+                * Expire far in the future, u300_set_next_event() will be
+                * called soon...
+                */
+               writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+               /* We run one shot per tick here! */
+               writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+               /* Enable interrupts for this timer */
+               writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+               /* Enable timer */
+               writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+               break;
+       case CLOCK_EVT_MODE_UNUSED:
+       case CLOCK_EVT_MODE_SHUTDOWN:
+               /* Disable interrupts on GP1 */
+               writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+               /* Disable GP1 */
+               writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+                      U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+               break;
+       case CLOCK_EVT_MODE_RESUME:
+               /* Ignore this call */
+               break;
+       }
+ }
+ /*
+  * The app timer in one shot mode obviously has to be reprogrammed
+  * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+  * the interrupt disable + timer disable commands with a reset command,
+  * it will fail miserably. Apparently (and I found this the hard way)
+  * the timer is very sensitive to the instruction order, though you don't
+  * get that impression from the data sheet.
+  */
+ static int u300_set_next_event(unsigned long cycles,
+                              struct clock_event_device *evt)
+ {
+       /* Disable interrupts on GPT1 */
+       writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+       /* Disable GP1 while we're reprogramming it. */
+       writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+       /* Reset the General Purpose timer 1. */
+       writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+       /* IRQ in n * cycles */
+       writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+       /*
+        * We run one shot per tick here! (This is necessary to reconfigure,
+        * the timer will tilt if you don't!)
+        */
+       writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+       /* Enable timer interrupts */
+       writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+       /* Then enable the OS timer again */
+       writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+       return 0;
+ }
+ /* Use general purpose timer 1 as clock event */
+ static struct clock_event_device clockevent_u300_1mhz = {
+       .name           = "GPT1",
+       .rating         = 300, /* Reasonably fast and accurate clock event */
+       .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+       /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+       .shift          = 22,
+       .set_next_event = u300_set_next_event,
+       .set_mode       = u300_set_mode,
+ };
+ /* Clock event timer interrupt handler */
+ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+ {
+       struct clock_event_device *evt = &clockevent_u300_1mhz;
+       /* ACK/Clear timer IRQ for the APP GPT1 Timer */
+       writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+       evt->event_handler(evt);
+       return IRQ_HANDLED;
+ }
+ static struct irqaction u300_timer_irq = {
+       .name           = "U300 Timer Tick",
+       .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+       .handler        = u300_timer_interrupt,
+ };
+ /* Use general purpose timer 2 as clock source */
++static cycle_t u300_get_cycles(struct clocksource *cs)
+ {
+       return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+ }
+ static struct clocksource clocksource_u300_1mhz = {
+       .name           = "GPT2",
+       .rating         = 300, /* Reasonably fast and accurate clock source */
+       .read           = u300_get_cycles,
+       .mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
+       /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+       .shift          = 22,
+       .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+ };
+ /*
+  * This sets up the system timers, clock source and clock event.
+  */
+ static void __init u300_timer_init(void)
+ {
+       u300_enable_timer_clock();
+       /*
+        * Disable the "OS" and "DD" timers - these are designed for Symbian!
+        * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+        */
+       writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+       writel(U300_TIMER_APP_ROST_TIMER_RESET,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+       writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+       writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+       writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+       /* Reset the General Purpose timer 1. */
+       writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+       /* Set up the IRQ handler */
+       setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+       /* Reset the General Purpose timer 2 */
+       writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+       /* Set this timer to run around forever */
+       writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+       /* Set continuous mode so it wraps around */
+       writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+              U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+       /* Disable timer interrupts */
+       writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+       /* Then enable the GP2 timer to use as a free running us counter */
+       writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+               U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+       /* This is a pure microsecond clock source */
+       clocksource_u300_1mhz.mult =
+               clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+       if (clocksource_register(&clocksource_u300_1mhz))
+               printk(KERN_ERR "timer: failed to initialize clock "
+                      "source %s\n", clocksource_u300_1mhz.name);
+       clockevent_u300_1mhz.mult =
+               div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+       /* 32bit counter, so 32bits delta is max */
+       clockevent_u300_1mhz.max_delta_ns =
+               clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
+       /* This timer is slow enough to set for 1 cycle == 1 MHz */
+       clockevent_u300_1mhz.min_delta_ns =
+               clockevent_delta2ns(1, &clockevent_u300_1mhz);
+       clockevent_u300_1mhz.cpumask = cpumask_of(0);
+       clockevents_register_device(&clockevent_u300_1mhz);
+       /*
+        * TODO: init and register the rest of the timers too, they can be
+        * used by hrtimers!
+        */
+ }
+ /*
+  * Very simple system timer that only register the clock event and
+  * clock source.
+  */
+ struct sys_timer u300_timer = {
+       .init           = u300_timer_init,
+ };
Simple merge