Fix Vitesse RGMII-ID support
authorAndy Fleming <afleming@freescale.com>
Wed, 11 Jul 2007 16:42:35 +0000 (11:42 -0500)
committerJeff Garzik <jeff@garzik.org>
Wed, 18 Jul 2007 22:29:37 +0000 (18:29 -0400)
The Vitesse PHY on the 8641D needs to be set up with internal delay to
work in RGMII mode.  So we add skew when it is set to RGMII_ID mode.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Haruki Dai <Dai.Haruki@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
drivers/net/phy/vitesse.c

index f39ab76e6f67d0fa81de639b5007a14347aa8179..6a53856479114c33fc8cf47e7d76ad0d814ff55e 100644 (file)
 /* Vitesse Extended Control Register 1 */
 #define MII_VSC8244_EXT_CON1           0x17
 #define MII_VSC8244_EXTCON1_INIT       0x0000
+#define MII_VSC8244_EXTCON1_TX_SKEW_MASK       0x0c00
+#define MII_VSC8244_EXTCON1_RX_SKEW_MASK       0x0300
+#define MII_VSC8244_EXTCON1_TX_SKEW    0x0800
+#define MII_VSC8244_EXTCON1_RX_SKEW    0x0200
 
 /* Vitesse Interrupt Mask Register */
 #define MII_VSC8244_IMASK              0x19
@@ -39,7 +43,7 @@
 
 /* Vitesse Auxiliary Control/Status Register */
 #define MII_VSC8244_AUX_CONSTAT                0x1c
-#define MII_VSC8244_AUXCONSTAT_INIT            0x0004
+#define MII_VSC8244_AUXCONSTAT_INIT            0x0000
 #define MII_VSC8244_AUXCONSTAT_DUPLEX          0x0020
 #define MII_VSC8244_AUXCONSTAT_SPEED           0x0018
 #define MII_VSC8244_AUXCONSTAT_GBIT            0x0010
@@ -51,6 +55,7 @@ MODULE_LICENSE("GPL");
 
 static int vsc824x_config_init(struct phy_device *phydev)
 {
+       int extcon;
        int err;
 
        err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
@@ -58,8 +63,20 @@ static int vsc824x_config_init(struct phy_device *phydev)
        if (err < 0)
                return err;
 
-       err = phy_write(phydev, MII_VSC8244_EXT_CON1,
-                       MII_VSC8244_EXTCON1_INIT);
+       extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
+
+       if (extcon < 0)
+               return err;
+
+       extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
+                       MII_VSC8244_EXTCON1_RX_SKEW_MASK);
+
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+               extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
+                               MII_VSC8244_EXTCON1_RX_SKEW);
+
+       err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
+
        return err;
 }