jme: Added half-duplex mode and IPv6 RSS fix
authorGuo-Fu Tseng <cooldavid@cooldavid.org>
Thu, 9 Oct 2008 02:48:58 +0000 (19:48 -0700)
committerDavid S. Miller <davem@davemloft.net>
Thu, 9 Oct 2008 02:51:31 +0000 (19:51 -0700)
1. Set bit 5 of GPREG1 to 1 to enable hardware workaround for half-duplex
   mode. Which the MAC processor generates CRS/COL by itself instead of
   receive it from PHY processor.

2. Set bit 6 of GPREG1 to 1 to enable hardware workaround that masks the
   MAC processor working right while calculating IPv6 RSS in 10/100
   mode.

3. Group the workaround codes all together.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/jme.c
drivers/net/jme.h

index f292df55754468b1fbb56d8f451dd939f627ca20..635f616fd974e8141d2d698a4b4e76559574abdb 100644 (file)
@@ -190,7 +190,7 @@ jme_reset_mac_processor(struct jme_adapter *jme)
        else
                gpreg0 = GPREG0_DEFAULT;
        jwrite32(jme, JME_GPREG0, gpreg0);
-       jwrite32(jme, JME_GPREG1, 0);
+       jwrite32(jme, JME_GPREG1, GPREG1_DEFAULT);
 }
 
 static inline void
@@ -365,7 +365,7 @@ static int
 jme_check_link(struct net_device *netdev, int testonly)
 {
        struct jme_adapter *jme = netdev_priv(netdev);
-       u32 phylink, ghc, cnt = JME_SPDRSV_TIMEOUT, bmcr;
+       u32 phylink, ghc, cnt = JME_SPDRSV_TIMEOUT, bmcr, gpreg1;
        char linkmsg[64];
        int rc = 0;
 
@@ -437,37 +437,22 @@ jme_check_link(struct net_device *netdev, int testonly)
                case PHY_LINK_SPEED_10M:
                        ghc |= GHC_SPEED_10M;
                        strcat(linkmsg, "10 Mbps, ");
-                       if (is_buggy250(jme->pdev->device, jme->chiprev))
-                               jme_set_phyfifoa(jme);
                        break;
                case PHY_LINK_SPEED_100M:
                        ghc |= GHC_SPEED_100M;
                        strcat(linkmsg, "100 Mbps, ");
-                       if (is_buggy250(jme->pdev->device, jme->chiprev))
-                               jme_set_phyfifob(jme);
                        break;
                case PHY_LINK_SPEED_1000M:
                        ghc |= GHC_SPEED_1000M;
                        strcat(linkmsg, "1000 Mbps, ");
-                       if (is_buggy250(jme->pdev->device, jme->chiprev))
-                               jme_set_phyfifoa(jme);
                        break;
                default:
                        break;
                }
-               ghc |= (phylink & PHY_LINK_DUPLEX) ? GHC_DPX : 0;
-
-               strcat(linkmsg, (phylink & PHY_LINK_DUPLEX) ?
-                                       "Full-Duplex, " :
-                                       "Half-Duplex, ");
-
-               if (phylink & PHY_LINK_MDI_STAT)
-                       strcat(linkmsg, "MDI-X");
-               else
-                       strcat(linkmsg, "MDI");
 
                if (phylink & PHY_LINK_DUPLEX) {
                        jwrite32(jme, JME_TXMCS, TXMCS_DEFAULT);
+                       ghc |= GHC_DPX;
                } else {
                        jwrite32(jme, JME_TXMCS, TXMCS_DEFAULT |
                                                TXMCS_BACKOFF |
@@ -478,6 +463,36 @@ jme_check_link(struct net_device *netdev, int testonly)
                                TXTRHD_TXREN |
                                ((8 << TXTRHD_TXRL_SHIFT) & TXTRHD_TXRL));
                }
+               strcat(linkmsg, (phylink & PHY_LINK_DUPLEX) ?
+                                       "Full-Duplex, " :
+                                       "Half-Duplex, ");
+
+               if (phylink & PHY_LINK_MDI_STAT)
+                       strcat(linkmsg, "MDI-X");
+               else
+                       strcat(linkmsg, "MDI");
+
+               gpreg1 = GPREG1_DEFAULT;
+               if (is_buggy250(jme->pdev->device, jme->chiprev)) {
+                       if (!(phylink & PHY_LINK_DUPLEX))
+                               gpreg1 |= GPREG1_HALFMODEPATCH;
+                       switch (phylink & PHY_LINK_SPEED_MASK) {
+                       case PHY_LINK_SPEED_10M:
+                               jme_set_phyfifoa(jme);
+                               gpreg1 |= GPREG1_RSSPATCH;
+                               break;
+                       case PHY_LINK_SPEED_100M:
+                               jme_set_phyfifob(jme);
+                               gpreg1 |= GPREG1_RSSPATCH;
+                               break;
+                       case PHY_LINK_SPEED_1000M:
+                               jme_set_phyfifoa(jme);
+                               break;
+                       default:
+                               break;
+                       }
+               }
+               jwrite32(jme, JME_GPREG1, gpreg1);
 
                jme->reg_ghc = ghc;
                jwrite32(jme, JME_GHC, ghc);
index b29688431a6d6d85b94e4adfc9318d42371be31e..9fdf20a9a82029a4224f042f887e4ad238055207 100644 (file)
@@ -963,6 +963,36 @@ enum jme_gpreg0_vals {
                                  GPREG0_PHYADDR_1,
 };
 
+/*
+ * General Purpose REG-1
+ * Note: All theses bits defined here are for
+ *       Chip mode revision 0x11 only
+ */
+enum jme_gpreg1_masks {
+       GPREG1_INTRDELAYUNIT    = 0x00000018,
+       GPREG1_INTRDELAYENABLE  = 0x00000007,
+};
+
+enum jme_gpreg1_vals {
+       GPREG1_RSSPATCH         = 0x00000040,
+       GPREG1_HALFMODEPATCH    = 0x00000020,
+
+       GPREG1_INTDLYUNIT_16NS  = 0x00000000,
+       GPREG1_INTDLYUNIT_256NS = 0x00000008,
+       GPREG1_INTDLYUNIT_1US   = 0x00000010,
+       GPREG1_INTDLYUNIT_16US  = 0x00000018,
+
+       GPREG1_INTDLYEN_1U      = 0x00000001,
+       GPREG1_INTDLYEN_2U      = 0x00000002,
+       GPREG1_INTDLYEN_3U      = 0x00000003,
+       GPREG1_INTDLYEN_4U      = 0x00000004,
+       GPREG1_INTDLYEN_5U      = 0x00000005,
+       GPREG1_INTDLYEN_6U      = 0x00000006,
+       GPREG1_INTDLYEN_7U      = 0x00000007,
+
+       GPREG1_DEFAULT          = 0x00000000,
+};
+
 /*
  * Interrupt Status Bits
  */