tty: Introduce some close helpers for ports
authorAlan Cox <alan@redhat.com>
Fri, 2 Jan 2009 13:46:50 +0000 (13:46 +0000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 2 Jan 2009 18:19:40 +0000 (10:19 -0800)
Again this is a lot of common code we can unify

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/char/isicom.c
drivers/char/istallion.c
drivers/char/mxser.c
drivers/char/riscom8.c
drivers/char/stallion.c
drivers/char/synclink.c
drivers/char/synclink_gt.c
drivers/char/synclinkmp.c
drivers/char/tty_port.c
include/linux/istallion.h
include/linux/tty.h

index bac55cf44243611945fe423110309f616178b452..24aa6e88e223d5772649182d878342224749c3c1 100644 (file)
@@ -945,76 +945,30 @@ static void isicom_flush_buffer(struct tty_struct *tty)
 
 static void isicom_close(struct tty_struct *tty, struct file *filp)
 {
-       struct isi_port *port = tty->driver_data;
+       struct isi_port *ip = tty->driver_data;
+       struct tty_port *port = &ip->port;
        struct isi_board *card;
        unsigned long flags;
 
-       if (!port)
-               return;
-       card = port->card;
-       if (isicom_paranoia_check(port, tty->name, "isicom_close"))
-               return;
-
-       pr_dbg("Close start!!!.\n");
-
-       spin_lock_irqsave(&port->port.lock, flags);
-       if (tty_hung_up_p(filp)) {
-               spin_unlock_irqrestore(&port->port.lock, flags);
-               return;
-       }
-
-       if (tty->count == 1 && port->port.count != 1) {
-               printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
-                       "count tty->count = 1 port count = %d.\n",
-                       card->base, port->port.count);
-               port->port.count = 1;
-       }
-       if (--port->port.count < 0) {
-               printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
-                       "count for channel%d = %d", card->base, port->channel,
-                       port->port.count);
-               port->port.count = 0;
-       }
+       BUG_ON(!ip);
 
-       if (port->port.count) {
-               spin_unlock_irqrestore(&port->port.lock, flags);
+       card = ip->card;
+       if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
                return;
-       }
-       port->port.flags |= ASYNC_CLOSING;
-       tty->closing = 1;
-       spin_unlock_irqrestore(&port->port.lock, flags);
 
-       if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
-               tty_wait_until_sent(tty, port->port.closing_wait);
        /* indicate to the card that no more data can be received
           on this port */
        spin_lock_irqsave(&card->card_lock, flags);
-       if (port->port.flags & ASYNC_INITIALIZED) {
-               card->port_status &= ~(1 << port->channel);
+       if (port->flags & ASYNC_INITIALIZED) {
+               card->port_status &= ~(1 << ip->channel);
                outw(card->port_status, card->base + 0x02);
        }
-       isicom_shutdown_port(port);
+       isicom_shutdown_port(ip);
        spin_unlock_irqrestore(&card->card_lock, flags);
 
        isicom_flush_buffer(tty);
-       tty_ldisc_flush(tty);
-
-       spin_lock_irqsave(&port->port.lock, flags);
-       tty->closing = 0;
-
-       if (port->port.blocked_open) {
-               spin_unlock_irqrestore(&port->port.lock, flags);
-               if (port->port.close_delay) {
-                       pr_dbg("scheduling until time out.\n");
-                       msleep_interruptible(
-                               jiffies_to_msecs(port->port.close_delay));
-               }
-               spin_lock_irqsave(&port->port.lock, flags);
-               wake_up_interruptible(&port->port.open_wait);
-       }
-       port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-       wake_up_interruptible(&port->port.close_wait);
-       spin_unlock_irqrestore(&port->port.lock, flags);
+       
+       tty_port_close_end(port, tty);
 }
 
 /* write et all */
index 4c69ab97339a05a2c58864efb2b1955ba57a6125..5c3dc6b8411c88d62ec800f082678dc6f66ec3d8 100644 (file)
@@ -767,7 +767,7 @@ static int stli_parsebrd(struct stlconf *confp, char **argp)
                        break;
        }
        if (i == ARRAY_SIZE(stli_brdstr)) {
-               printk("STALLION: unknown board name, %s?\n", argp[0]);
+               printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]);
                return 0;
        }
 
@@ -855,21 +855,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
                return;
        port = &portp->port;
 
-       spin_lock_irqsave(&port->lock, flags);
-       if (tty_hung_up_p(filp)) {
-               spin_unlock_irqrestore(&port->lock, flags);
-               return;
-       }
-       if (tty->count == 1 && port->count != 1)
-               port->count = 1;
-       if (port->count-- > 1) {
-               spin_unlock_irqrestore(&port->lock, flags);
+       if (tty_port_close_start(port, tty, filp) == 0)
                return;
-       }
-
-       port->flags |= ASYNC_CLOSING;
-       tty->closing = 1;
-       spin_unlock_irqrestore(&port->lock, flags);
 
 /*
  *     May want to wait for data to drain before closing. The BUSY flag
@@ -882,6 +869,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
                stli_flushchars(tty);
        spin_unlock_irqrestore(&stli_lock, flags);
 
+       /* We end up doing this twice for the moment. This needs looking at
+          eventually. Note we still use portp->closing_wait as a result */
        if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
                tty_wait_until_sent(tty, portp->closing_wait);
 
@@ -905,17 +894,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
        set_bit(ST_DOFLUSHRX, &portp->state);
        stli_flushbuffer(tty);
 
-       tty->closing = 0;
-       tty_port_tty_set(&portp->port, NULL);
-
-       if (port->blocked_open) {
-               if (portp->close_delay)
-                       msleep_interruptible(jiffies_to_msecs(portp->close_delay));
-               wake_up_interruptible(&port->open_wait);
-       }
-
-       port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-       wake_up_interruptible(&port->close_wait);
+       tty_port_close_end(port, tty);
+       tty_port_tty_set(port, NULL);
 }
 
 /*****************************************************************************/
@@ -1482,7 +1462,7 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s
        sio.irq = 0;
        sio.flags = portp->port.flags;
        sio.baud_base = portp->baud_base;
-       sio.close_delay = portp->close_delay;
+       sio.close_delay = portp->port.close_delay;
        sio.closing_wait = portp->closing_wait;
        sio.custom_divisor = portp->custom_divisor;
        sio.xmit_fifo_size = 0;
@@ -1514,7 +1494,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s
                return -EFAULT;
        if (!capable(CAP_SYS_ADMIN)) {
                if ((sio.baud_base != portp->baud_base) ||
-                   (sio.close_delay != portp->close_delay) ||
+                   (sio.close_delay != portp->port.close_delay) ||
                    ((sio.flags & ~ASYNC_USR_MASK) !=
                    (portp->port.flags & ~ASYNC_USR_MASK)))
                        return -EPERM;
@@ -1523,7 +1503,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s
        portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
                (sio.flags & ASYNC_USR_MASK);
        portp->baud_base = sio.baud_base;
-       portp->close_delay = sio.close_delay;
+       portp->port.close_delay = sio.close_delay;
        portp->closing_wait = sio.closing_wait;
        portp->custom_divisor = sio.custom_divisor;
 
@@ -2065,7 +2045,7 @@ static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigne
        unsigned char __iomem *bits;
 
        if (test_bit(ST_CMDING, &portp->state)) {
-               printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n",
+               printk(KERN_ERR "istallion: command already busy, cmd=%x!\n",
                                (int) cmd);
                return;
        }
@@ -2625,7 +2605,7 @@ static int stli_initports(struct stlibrd *brdp)
        for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
                portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
                if (!portp) {
-                       printk("STALLION: failed to allocate port structure\n");
+                       printk(KERN_WARNING "istallion: failed to allocate port structure\n");
                        continue;
                }
                tty_port_init(&portp->port);
@@ -2635,7 +2615,7 @@ static int stli_initports(struct stlibrd *brdp)
                portp->brdnr = brdp->brdnr;
                portp->panelnr = panelnr;
                portp->baud_base = STL_BAUDBASE;
-               portp->close_delay = STL_CLOSEDELAY;
+               portp->port.close_delay = STL_CLOSEDELAY;
                portp->closing_wait = 30 * HZ;
                init_waitqueue_head(&portp->port.open_wait);
                init_waitqueue_head(&portp->port.close_wait);
@@ -2692,7 +2672,7 @@ static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offse
        unsigned char val;
 
        if (offset > brdp->memsize) {
-               printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+               printk(KERN_ERR "istallion: shared memory pointer=%x out of "
                                "range at line=%d(%d), brd=%d\n",
                        (int) offset, line, __LINE__, brdp->brdnr);
                ptr = NULL;
@@ -2766,7 +2746,7 @@ static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long off
        unsigned char   val;
 
        if (offset > brdp->memsize) {
-               printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+               printk(KERN_ERR "istallion: shared memory pointer=%x out of "
                                "range at line=%d(%d), brd=%d\n",
                        (int) offset, line, __LINE__, brdp->brdnr);
                ptr = NULL;
@@ -2818,7 +2798,7 @@ static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long off
        unsigned char val;
 
        if (offset > brdp->memsize) {
-               printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+               printk(KERN_ERR "istallion: shared memory pointer=%x out of "
                                "range at line=%d(%d), brd=%d\n",
                        (int) offset, line, __LINE__, brdp->brdnr);
                ptr = NULL;
@@ -2863,7 +2843,7 @@ static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long of
        unsigned char   val;
 
        if (offset > brdp->memsize) {
-               printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+               printk(KERN_ERR "istallion: shared memory pointer=%x out of "
                                "range at line=%d(%d), board=%d\n",
                                (int) offset, line, __LINE__, brdp->brdnr);
                ptr = NULL;
@@ -2928,7 +2908,7 @@ static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offse
        void __iomem *ptr;
 
        if (offset > brdp->memsize) {
-               printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+               printk(KERN_ERR "istallion: shared memory pointer=%x out of "
                                "range at line=%d(%d), brd=%d\n",
                                (int) offset, line, __LINE__, brdp->brdnr);
                ptr = NULL;
@@ -2994,7 +2974,7 @@ static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offs
        unsigned char val;
 
        if (offset > brdp->memsize) {
-               printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+               printk(KERN_ERR "istallion: shared memory pointer=%x out of "
                                "range at line=%d(%d), brd=%d\n",
                        (int) offset, line, __LINE__, brdp->brdnr);
                ptr = NULL;
@@ -3433,7 +3413,7 @@ static int stli_startbrd(struct stlibrd *brdp)
 #endif
 
        if (nrdevs < (brdp->nrports + 1)) {
-               printk(KERN_ERR "STALLION: slave failed to allocate memory for "
+               printk(KERN_ERR "istallion: slave failed to allocate memory for "
                                "all devices, devices=%d\n", nrdevs);
                brdp->nrports = nrdevs - 1;
        }
@@ -3443,13 +3423,13 @@ static int stli_startbrd(struct stlibrd *brdp)
        brdp->bitsize = (nrdevs + 7) / 8;
        memoff = readl(&hdrp->memp);
        if (memoff > brdp->memsize) {
-               printk(KERN_ERR "STALLION: corrupted shared memory region?\n");
+               printk(KERN_ERR "istallion: corrupted shared memory region?\n");
                rc = -EIO;
                goto stli_donestartup;
        }
        memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
        if (readw(&memp->dtype) != TYP_ASYNCTRL) {
-               printk(KERN_ERR "STALLION: no slave control device found\n");
+               printk(KERN_ERR "istallion: no slave control device found\n");
                goto stli_donestartup;
        }
        memp++;
@@ -3534,7 +3514,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp)
                retval = stli_initonb(brdp);
                break;
        default:
-               printk(KERN_ERR "STALLION: board=%d is unknown board "
+               printk(KERN_ERR "istallion: board=%d is unknown board "
                                "type=%d\n", brdp->brdnr, brdp->brdtype);
                retval = -ENODEV;
        }
@@ -3543,7 +3523,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp)
                return retval;
 
        stli_initports(brdp);
-       printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x "
+       printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x "
                "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
                brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
                brdp->nrpanels, brdp->nrports);
@@ -3637,7 +3617,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp)
        if (! foundit) {
                brdp->memaddr = 0;
                brdp->membase = NULL;
-               printk(KERN_ERR "STALLION: failed to probe shared memory "
+               printk(KERN_ERR "istallion: failed to probe shared memory "
                                "region for %s in EISA slot=%d\n",
                        stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
                return -ENODEV;
@@ -3782,7 +3762,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev,
        mutex_lock(&stli_brdslock);
        brdnr = stli_getbrdnr();
        if (brdnr < 0) {
-               printk(KERN_INFO "STALLION: too many boards found, "
+               printk(KERN_INFO "istallion: too many boards found, "
                        "maximum supported %d\n", STL_MAXBRDS);
                mutex_unlock(&stli_brdslock);
                retval = -EIO;
@@ -3854,7 +3834,7 @@ static struct stlibrd *stli_allocbrd(void)
 
        brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
        if (!brdp) {
-               printk(KERN_ERR "STALLION: failed to allocate memory "
+               printk(KERN_ERR "istallion: failed to allocate memory "
                                "(size=%Zd)\n", sizeof(struct stlibrd));
                return NULL;
        }
@@ -4493,7 +4473,7 @@ static int __init istallion_module_init(void)
 
        stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
        if (!stli_txcookbuf) {
-               printk(KERN_ERR "STALLION: failed to allocate memory "
+               printk(KERN_ERR "istallion: failed to allocate memory "
                                "(size=%d)\n", STLI_TXBUFSIZE);
                retval = -ENOMEM;
                goto err;
@@ -4518,7 +4498,7 @@ static int __init istallion_module_init(void)
 
        retval = tty_register_driver(stli_serial);
        if (retval) {
-               printk(KERN_ERR "STALLION: failed to register serial driver\n");
+               printk(KERN_ERR "istallion: failed to register serial driver\n");
                goto err_ttyput;
        }
 
@@ -4532,7 +4512,7 @@ static int __init istallion_module_init(void)
  */
        retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
        if (retval) {
-               printk(KERN_ERR "STALLION: failed to register serial memory "
+               printk(KERN_ERR "istallion: failed to register serial memory "
                                "device\n");
                goto err_deinit;
        }
index 08ba6eb1a380850e0de2f6dd6a8a1336a67be7bc..402c9f217f83a3853f62b5a09401ab8ab0d8f3a3 100644 (file)
@@ -1080,57 +1080,26 @@ static void mxser_flush_buffer(struct tty_struct *tty)
 static void mxser_close(struct tty_struct *tty, struct file *filp)
 {
        struct mxser_port *info = tty->driver_data;
+       struct tty_port *port = &info->port;
 
        unsigned long timeout;
-       unsigned long flags;
 
        if (tty->index == MXSER_PORTS)
                return;
        if (!info)
                return;
 
-       spin_lock_irqsave(&info->port.lock, flags);
-
-       if (tty_hung_up_p(filp)) {
-               spin_unlock_irqrestore(&info->port.lock, flags);
-               return;
-       }
-       if ((tty->count == 1) && (info->port.count != 1)) {
-               /*
-                * Uh, oh.  tty->count is 1, which means that the tty
-                * structure will be freed.  Info->port.count should always
-                * be one in these conditions.  If it's greater than
-                * one, we've got real problems, since it means the
-                * serial port won't be shutdown.
-                */
-               printk(KERN_ERR "mxser_close: bad serial port count; "
-                       "tty->count is 1, info->port.count is %d\n", info->port.count);
-               info->port.count = 1;
-       }
-       if (--info->port.count < 0) {
-               printk(KERN_ERR "mxser_close: bad serial port count for "
-                       "ttys%d: %d\n", tty->index, info->port.count);
-               info->port.count = 0;
-       }
-       if (info->port.count) {
-               spin_unlock_irqrestore(&info->port.lock, flags);
+       if (tty_port_close_start(port, tty, filp) == 0)
                return;
-       }
-       info->port.flags |= ASYNC_CLOSING;
-       spin_unlock_irqrestore(&info->port.lock, flags);
+
        /*
         * Save the termios structure, since this port may have
         * separate termios for callout and dialin.
+        *
+        * FIXME: Can this go ?
         */
        if (info->port.flags & ASYNC_NORMAL_ACTIVE)
                info->normal_termios = *tty->termios;
-       /*
-        * Now we wait for the transmit buffer to clear; and we notify
-        * the line discipline to only process XON/XOFF characters.
-        */
-       tty->closing = 1;
-       if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
-               tty_wait_until_sent(tty, info->port.closing_wait);
        /*
         * At this point we stop accepting input.  To do this, we
         * disable the receive line status interrupts, and tell the
@@ -1156,19 +1125,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
                }
        }
        mxser_shutdown(tty);
-
        mxser_flush_buffer(tty);
-       tty_ldisc_flush(tty);
-
-       tty->closing = 0;
-       tty_port_tty_set(&info->port, NULL);
-       if (info->port.blocked_open) {
-               if (info->port.close_delay)
-                       schedule_timeout_interruptible(info->port.close_delay);
-               wake_up_interruptible(&info->port.open_wait);
-       }
 
-       info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+       /* Right now the tty_port set is done outside of the close_end helper
+          as we don't yet have everyone using refcounts */     
+       tty_port_close_end(port, tty);
+       tty_port_tty_set(port, NULL);
 }
 
 static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
index af34c2054a09171377b73f59a99793a184a9fa7f..9ac5febd8abdc977421860799f31facc23b2798d 100644 (file)
@@ -929,35 +929,11 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
        if (!port || rc_paranoia_check(port, tty->name, "close"))
                return;
 
-       spin_lock_irqsave(&port->port.lock, flags);
-
-       if (tty_hung_up_p(filp))
-               goto out;
-
        bp = port_Board(port);
-       if ((tty->count == 1) && (port->port.count != 1))  {
-               printk(KERN_INFO "rc%d: rc_close: bad port count;"
-                      " tty->count is 1, port count is %d\n",
-                      board_No(bp), port->port.count);
-               port->port.count = 1;
-       }
-       if (--port->port.count < 0)  {
-               printk(KERN_INFO "rc%d: rc_close: bad port count "
-                                "for tty%d: %d\n",
-                      board_No(bp), port_No(port), port->port.count);
-               port->port.count = 0;
-       }
-       if (port->port.count)
-               goto out;
-       port->port.flags |= ASYNC_CLOSING;
-       /*
-        * Now we wait for the transmit buffer to clear; and we notify
-        * the line discipline to only process XON/XOFF characters.
-        */
-       tty->closing = 1;
-       spin_unlock_irqrestore(&port->port.lock, flags);
-       if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
-               tty_wait_until_sent(tty, port->port.closing_wait);
+       
+       if (tty_port_close_start(&port->port, tty, filp) == 0)
+               return;
+       
        /*
         * At this point we stop accepting input.  To do this, we
         * disable the receive line status interrupts, and tell the
@@ -989,23 +965,8 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
        rc_shutdown_port(tty, bp, port);
        rc_flush_buffer(tty);
        spin_unlock_irqrestore(&riscom_lock, flags);
-       tty_ldisc_flush(tty);
 
-       spin_lock_irqsave(&port->port.lock, flags);
-       tty->closing = 0;
-       port->port.tty = NULL;
-       if (port->port.blocked_open) {
-               spin_unlock_irqrestore(&port->port.lock, flags);
-               if (port->port.close_delay)
-                       msleep_interruptible(jiffies_to_msecs(port->port.close_delay));
-               wake_up_interruptible(&port->port.open_wait);
-               spin_lock_irqsave(&port->port.lock, flags);
-       }
-       port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-       wake_up_interruptible(&port->port.close_wait);
-
-out:
-       spin_unlock_irqrestore(&riscom_lock, flags);
+       tty_port_close_end(&port->port, tty);
 }
 
 static int rc_write(struct tty_struct *tty,
index 77eef61c46f3aca520977877f8bcb5a8714c80d2..e1e0dd89ac9aa309e2f92c9183618948b09b6900 100644 (file)
@@ -833,40 +833,20 @@ static void stl_close(struct tty_struct *tty, struct file *filp)
        pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
 
        portp = tty->driver_data;
-       if (portp == NULL)
-               return;
+       BUG_ON(portp == NULL);
+
        port = &portp->port;
 
-       spin_lock_irqsave(&port->lock, flags);
-       if (tty_hung_up_p(filp)) {
-               spin_unlock_irqrestore(&port->lock, flags);
+       if (tty_port_close_start(port, tty, filp) == 0)
                return;
-       }
-       if (tty->count == 1 && port->count != 1)
-               port->count = 1;
-       if (port->count-- > 1) {
-               spin_unlock_irqrestore(&port->lock, flags);
-               return;
-       }
-
-       port->count = 0;
-       port->flags |= ASYNC_CLOSING;
-
 /*
  *     May want to wait for any data to drain before closing. The BUSY
  *     flag keeps track of whether we are still sending or not - it is
  *     very accurate for the cd1400, not quite so for the sc26198.
  *     (The sc26198 has no "end-of-data" interrupt only empty FIFO)
  */
-       tty->closing = 1;
-
-       spin_unlock_irqrestore(&port->lock, flags);
-
-       if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-               tty_wait_until_sent(tty, portp->closing_wait);
        stl_waituntilsent(tty, (HZ / 2));
 
-
        spin_lock_irqsave(&port->lock, flags);
        portp->port.flags &= ~ASYNC_INITIALIZED;
        spin_unlock_irqrestore(&port->lock, flags);
@@ -883,20 +863,9 @@ static void stl_close(struct tty_struct *tty, struct file *filp)
                portp->tx.head = NULL;
                portp->tx.tail = NULL;
        }
-       set_bit(TTY_IO_ERROR, &tty->flags);
-       tty_ldisc_flush(tty);
 
-       tty->closing = 0;
+       tty_port_close_end(port, tty);
        tty_port_tty_set(port, NULL);
-
-       if (port->blocked_open) {
-               if (portp->close_delay)
-                       msleep_interruptible(jiffies_to_msecs(portp->close_delay));
-               wake_up_interruptible(&portp->port.open_wait);
-       }
-
-       portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-       wake_up_interruptible(&port->close_wait);
 }
 
 /*****************************************************************************/
index 0ded4ed3da3c023c95836a15e82c70a7b2f5edf7..fbd5a5ce2e1c88bafacee994221418b103e0f9fd 100644 (file)
@@ -3104,70 +3104,18 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
        if (debug_level >= DEBUG_LEVEL_INFO)
                printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
                         __FILE__,__LINE__, info->device_name, info->port.count);
-                        
-       if (!info->port.count)
-               return;
 
-       if (tty_hung_up_p(filp))
+       if (tty_port_close_start(&info->port, tty, filp) == 0)                   
                goto cleanup;
                        
-       if ((tty->count == 1) && (info->port.count != 1)) {
-               /*
-                * tty->count is 1 and the tty structure will be freed.
-                * info->port.count should be one in this case.
-                * if it's not, correct it so that the port is shutdown.
-                */
-               printk("mgsl_close: bad refcount; tty->count is 1, "
-                      "info->port.count is %d\n", info->port.count);
-               info->port.count = 1;
-       }
-       
-       info->port.count--;
-       
-       /* if at least one open remaining, leave hardware active */
-       if (info->port.count)
-               goto cleanup;
-       
-       info->port.flags |= ASYNC_CLOSING;
-       
-       /* set tty->closing to notify line discipline to 
-        * only process XON/XOFF characters. Only the N_TTY
-        * discipline appears to use this (ppp does not).
-        */
-       tty->closing = 1;
-       
-       /* wait for transmit data to clear all layers */
-       
-       if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
-               if (debug_level >= DEBUG_LEVEL_INFO)
-                       printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n",
-                                __FILE__,__LINE__, info->device_name );
-               tty_wait_until_sent(tty, info->port.closing_wait);
-       }
-               
        if (info->port.flags & ASYNC_INITIALIZED)
                mgsl_wait_until_sent(tty, info->timeout);
-
        mgsl_flush_buffer(tty);
-
        tty_ldisc_flush(tty);
-               
        shutdown(info);
-       
-       tty->closing = 0;
+
+       tty_port_close_end(&info->port, tty);   
        info->port.tty = NULL;
-       
-       if (info->port.blocked_open) {
-               if (info->port.close_delay) {
-                       msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
-               }
-               wake_up_interruptible(&info->port.open_wait);
-       }
-       
-       info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-                        
-       wake_up_interruptible(&info->port.close_wait);
-       
 cleanup:                       
        if (debug_level >= DEBUG_LEVEL_INFO)
                printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
index 625c9bde3be846aa61adefc3d029f3b0bb58873d..53544e21f191a7d0779bbded3287040663ac209d 100644 (file)
@@ -720,44 +720,9 @@ static void close(struct tty_struct *tty, struct file *filp)
                return;
        DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
 
-       if (!info->port.count)
-               return;
-
-       if (tty_hung_up_p(filp))
+       if (tty_port_close_start(&info->port, tty, filp) == 0)
                goto cleanup;
 
-       if ((tty->count == 1) && (info->port.count != 1)) {
-               /*
-                * tty->count is 1 and the tty structure will be freed.
-                * info->port.count should be one in this case.
-                * if it's not, correct it so that the port is shutdown.
-                */
-               DBGERR(("%s close: bad refcount; tty->count=1, "
-                      "info->port.count=%d\n", info->device_name, info->port.count));
-               info->port.count = 1;
-       }
-
-       info->port.count--;
-
-       /* if at least one open remaining, leave hardware active */
-       if (info->port.count)
-               goto cleanup;
-
-       info->port.flags |= ASYNC_CLOSING;
-
-       /* set tty->closing to notify line discipline to
-        * only process XON/XOFF characters. Only the N_TTY
-        * discipline appears to use this (ppp does not).
-        */
-       tty->closing = 1;
-
-       /* wait for transmit data to clear all layers */
-
-       if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
-               DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
-               tty_wait_until_sent(tty, info->port.closing_wait);
-       }
-
        if (info->port.flags & ASYNC_INITIALIZED)
                wait_until_sent(tty, info->timeout);
        flush_buffer(tty);
@@ -765,20 +730,8 @@ static void close(struct tty_struct *tty, struct file *filp)
 
        shutdown(info);
 
-       tty->closing = 0;
+       tty_port_close_end(&info->port, tty);
        info->port.tty = NULL;
-
-       if (info->port.blocked_open) {
-               if (info->port.close_delay) {
-                       msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
-               }
-               wake_up_interruptible(&info->port.open_wait);
-       }
-
-       info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-
-       wake_up_interruptible(&info->port.close_wait);
-
 cleanup:
        DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
 }
index 1f5c21ec4b147c8f7ce900719df136507d8e69b0..2aac55bcf5fd76f142a1ba1adfb71548e03a460f 100644 (file)
@@ -810,70 +810,18 @@ static void close(struct tty_struct *tty, struct file *filp)
                printk("%s(%d):%s close() entry, count=%d\n",
                         __FILE__,__LINE__, info->device_name, info->port.count);
 
-       if (!info->port.count)
-               return;
-
-       if (tty_hung_up_p(filp))
-               goto cleanup;
-
-       if ((tty->count == 1) && (info->port.count != 1)) {
-               /*
-                * tty->count is 1 and the tty structure will be freed.
-                * info->port.count should be one in this case.
-                * if it's not, correct it so that the port is shutdown.
-                */
-               printk("%s(%d):%s close: bad refcount; tty->count is 1, "
-                      "info->port.count is %d\n",
-                        __FILE__,__LINE__, info->device_name, info->port.count);
-               info->port.count = 1;
-       }
-
-       info->port.count--;
-
-       /* if at least one open remaining, leave hardware active */
-       if (info->port.count)
+       if (tty_port_close_start(&info->port, tty, filp) == 0)
                goto cleanup;
-
-       info->port.flags |= ASYNC_CLOSING;
-
-       /* set tty->closing to notify line discipline to
-        * only process XON/XOFF characters. Only the N_TTY
-        * discipline appears to use this (ppp does not).
-        */
-       tty->closing = 1;
-
-       /* wait for transmit data to clear all layers */
-
-       if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
-               if (debug_level >= DEBUG_LEVEL_INFO)
-                       printk("%s(%d):%s close() calling tty_wait_until_sent\n",
-                                __FILE__,__LINE__, info->device_name );
-               tty_wait_until_sent(tty, info->port.closing_wait);
-       }
-
+               
        if (info->port.flags & ASYNC_INITIALIZED)
                wait_until_sent(tty, info->timeout);
 
        flush_buffer(tty);
-
        tty_ldisc_flush(tty);
-
        shutdown(info);
 
-       tty->closing = 0;
+       tty_port_close_end(&info->port, tty);
        info->port.tty = NULL;
-
-       if (info->port.blocked_open) {
-               if (info->port.close_delay) {
-                       msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
-               }
-               wake_up_interruptible(&info->port.open_wait);
-       }
-
-       info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-
-       wake_up_interruptible(&info->port.close_wait);
-
 cleanup:
        if (debug_level >= DEBUG_LEVEL_INFO)
                printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
index 0723664fe0ab5487d95be284b7c5a5c12139ddfb..b3175f54fe055f8011787d2907bee37c85acb888 100644 (file)
@@ -257,3 +257,61 @@ int tty_port_block_til_ready(struct tty_port *port,
 }
 EXPORT_SYMBOL(tty_port_block_til_ready);
 
+int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&port->lock, flags);
+       if (tty_hung_up_p(filp)) {
+               spin_unlock_irqrestore(&port->lock, flags);
+               return 0;
+       }
+
+       if( tty->count == 1 && port->count != 1) {
+               printk(KERN_WARNING
+                   "tty_port_close_start: tty->count = 1 port count = %d.\n",
+                                                               port->count);
+               port->count = 1;
+       }
+       if (--port->count < 0) {
+               printk(KERN_WARNING "tty_port_close_start: count = %d\n",
+                                                               port->count);
+               port->count = 0;
+       }
+
+       if (port->count) {
+               spin_unlock_irqrestore(&port->lock, flags);
+               return 0;
+       }
+       port->flags |= ASYNC_CLOSING;
+       tty->closing = 1;
+       spin_unlock_irqrestore(&port->lock, flags);
+       if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+               tty_wait_until_sent(tty, port->closing_wait);
+       return 1;
+}
+EXPORT_SYMBOL(tty_port_close_start);
+
+void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
+{
+       unsigned long flags;
+
+       tty_ldisc_flush(tty);
+
+       spin_lock_irqsave(&port->lock, flags);
+       tty->closing = 0;
+
+       if (port->blocked_open) {
+               spin_unlock_irqrestore(&port->lock, flags);
+               if (port->close_delay) {
+                       msleep_interruptible(
+                               jiffies_to_msecs(port->close_delay));
+               }
+               spin_lock_irqsave(&port->lock, flags);
+               wake_up_interruptible(&port->open_wait);
+       }
+       port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+       wake_up_interruptible(&port->close_wait);
+       spin_unlock_irqrestore(&port->lock, flags);
+}
+EXPORT_SYMBOL(tty_port_close_end);
index 053d5aea925ccb7b4dcb84a621b92c371e8a56f2..7faca98c7d1448885a0ecf31f2453fc908ec35e7 100644 (file)
@@ -59,7 +59,6 @@ struct stliport {
        unsigned int            devnr;
        int                     baud_base;
        int                     custom_divisor;
-       int                     close_delay;
        int                     closing_wait;
        int                     rc;
        int                     argsize;
index 61a0ab32cf11ce1efa38c559dba5e6ca1b743dff..fc39db95499fbab4142800b24faf52b182fae113 100644 (file)
@@ -441,6 +441,9 @@ extern void tty_port_raise_dtr_rts(struct tty_port *port);
 extern void tty_port_hangup(struct tty_port *port);
 extern int tty_port_block_til_ready(struct tty_port *port,
                                struct tty_struct *tty, struct file *filp);
+extern int tty_port_close_start(struct tty_port *port,
+                               struct tty_struct *tty, struct file *filp);
+extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
 
 extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
 extern int tty_unregister_ldisc(int disc);