ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy

Set the data delays to min, and clock delays to max
because the traces are equal length on pcb.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index a1e9ed765ac76a710d9fc1572374ec26fcfba382..d443eb77eae0124727a0da50363458d481414649 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -107,6 +107,18 @@
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii";
        phy-reset-gpios = <&gpio3 23 0>;
+       txen-skew-ps = <0>;
+       txc-skew-ps = <3000>;
+       rxdv-skew-ps = <0>;
+       rxc-skew-ps = <3000>;
+       rxd0-skew-ps = <0>;
+       rxd1-skew-ps = <0>;
+       rxd2-skew-ps = <0>;
+       rxd3-skew-ps = <0>;
+       txd0-skew-ps = <0>;
+       txd1-skew-ps = <0>;
+       txd2-skew-ps = <0>;
+       txd3-skew-ps = <0>;
        status = "okay";
 };