--- /dev/null
+What: /sys/class/backlight/<backlight>/<ambient light zone>_max
+What: /sys/class/backlight/<backlight>/l1_daylight_max
+What: /sys/class/backlight/<backlight>/l2_bright_max
+What: /sys/class/backlight/<backlight>/l3_office_max
+What: /sys/class/backlight/<backlight>/l4_indoor_max
+What: /sys/class/backlight/<backlight>/l5_dark_max
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the maximum brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127. This file
+ will also show the brightness level stored for this
+ <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/<ambient light zone>_dim
+What: /sys/class/backlight/<backlight>/l2_bright_dim
+What: /sys/class/backlight/<backlight>/l3_office_dim
+What: /sys/class/backlight/<backlight>/l4_indoor_dim
+What: /sys/class/backlight/<backlight>/l5_dark_dim
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the dim brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127, typically
+ set to 0. Full off when the backlight is disabled.
+ This file will also show the dim brightness level stored for
+ this <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/ambient_light_level
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get conversion value of the light sensor.
+ This value is updated every 80 ms (when the light sensor
+ is enabled). Returns integer between 0 (dark) and
+ 8000 (max ambient brightness)
+
+What: /sys/class/backlight/<backlight>/ambient_light_zone
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get/Set current ambient light zone. Reading returns
+ integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+ Writing a value between 1..5 forces the backlight controller
+ to enter the corresponding ambient light zone.
+ Writing 0 returns to normal/automatic ambient light level
+ operation. The ambient light sensing feature on these devices
+ is an extension to the API documented in
+ Documentation/ABI/stable/sysfs-class-backlight.
+ It can be enabled by writing the value stored in
+ /sys/class/backlight/<backlight>/max_brightness to
+ /sys/class/backlight/<backlight>/brightness.
\ No newline at end of file
To extract cgroup statistics a utility very similar to getdelays.c
has been developed, the sample output of the utility is shown below
-~/balbir/cgroupstats # ./getdelays -C "/cgroup/a"
+~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a"
sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays -C "/cgroup"
+~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup"
sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
- Enable group scheduling in CFQ
CONFIG_CFQ_GROUP_IOSCHED=y
-- Compile and boot into kernel and mount IO controller (blkio).
+- Compile and boot into kernel and mount IO controller (blkio); see
+ cgroups.txt, Why are cgroups needed?.
- mount -t cgroup -o blkio none /cgroup
+ mount -t tmpfs cgroup_root /sys/fs/cgroup
+ mkdir /sys/fs/cgroup/blkio
+ mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Create two cgroups
- mkdir -p /cgroup/test1/ /cgroup/test2
+ mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
- Set weights of group test1 and test2
- echo 1000 > /cgroup/test1/blkio.weight
- echo 500 > /cgroup/test2/blkio.weight
+ echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
+ echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
- Create two same size files (say 512MB each) on same disk (file1, file2) and
launch two dd threads in different cgroup to read those files.
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/sdb/zerofile1 of=/dev/null &
- echo $! > /cgroup/test1/tasks
- cat /cgroup/test1/tasks
+ echo $! > /sys/fs/cgroup/blkio/test1/tasks
+ cat /sys/fs/cgroup/blkio/test1/tasks
dd if=/mnt/sdb/zerofile2 of=/dev/null &
- echo $! > /cgroup/test2/tasks
- cat /cgroup/test2/tasks
+ echo $! > /sys/fs/cgroup/blkio/test2/tasks
+ cat /sys/fs/cgroup/blkio/test2/tasks
- At macro level, first dd should finish first. To get more precise data, keep
on looking at (with the help of script), at blkio.disk_time and
- Enable throttling in block layer
CONFIG_BLK_DEV_THROTTLING=y
-- Mount blkio controller
- mount -t cgroup -o blkio none /cgroup/blkio
+- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
+ mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Specify a bandwidth rate on particular device for root group. The format
for policy is "<major>:<minor> <byes_per_second>".
- echo "8:16 1048576" > /cgroup/blkio/blkio.read_bps_device
+ echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
Above will put a limit of 1MB/second on reads happening for root group
on device having major/minor number 8:16.
CFQ and throttling will practically treat all groups at same level.
pivot
- / | \ \
+ / / \ \
root test1 test2 test3
Down the line we can implement hierarchical accounting/control support
Following is the format.
- #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+ # echo dev_maj:dev_minor weight > blkio.weight_device
Configure weight=300 on /dev/sdb (8:16) in this cgroup
# echo 8:16 300 > blkio.weight_device
# cat blkio.weight_device
the admin can easily set up a script which receives exec notifications
and depending on who is launching the browser he can
- # echo browser_pid > /mnt/<restype>/<userclass>/tasks
+ # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
With only a single hierarchy, he now would potentially have to create
a separate cgroup for every browser launched and associate it with
-approp network and other resource class. This may lead to
+appropriate network and other resource class. This may lead to
proliferation of such cgroups.
Also lets say that the administrator would like to give enhanced network
With ability to write pids directly to resource classes, it's just a
matter of :
- # echo pid > /mnt/network/<new_class>/tasks
+ # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
(after some time)
- # echo pid > /mnt/network/<orig_class>/tasks
+ # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
Without this ability, he would have to split the cgroup into
multiple separate ones and then associate the new cgroups with the
To start a new job that is to be contained within a cgroup, using
the "cpuset" cgroup subsystem, the steps are something like:
- 1) mkdir /dev/cgroup
- 2) mount -t cgroup -ocpuset cpuset /dev/cgroup
- 3) Create the new cgroup by doing mkdir's and write's (or echo's) in
- the /dev/cgroup virtual file system.
- 4) Start a task that will be the "founding father" of the new job.
- 5) Attach that task to the new cgroup by writing its pid to the
- /dev/cgroup tasks file for that cgroup.
- 6) fork, exec or clone the job tasks from this founding father task.
+ 1) mount -t tmpfs cgroup_root /sys/fs/cgroup
+ 2) mkdir /sys/fs/cgroup/cpuset
+ 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ 4) Create the new cgroup by doing mkdir's and write's (or echo's) in
+ the /sys/fs/cgroup virtual file system.
+ 5) Start a task that will be the "founding father" of the new job.
+ 6) Attach that task to the new cgroup by writing its pid to the
+ /sys/fs/cgroup/cpuset/tasks file for that cgroup.
+ 7) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cgroup
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cgroup:
- mount -t cgroup cpuset -ocpuset /dev/cgroup
- cd /dev/cgroup
+ mount -t tmpfs cgroup_root /sys/fs/cgroup
+ mkdir /sys/fs/cgroup/cpuset
+ mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
+ cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
virtual filesystem.
To mount a cgroup hierarchy with all available subsystems, type:
-# mount -t cgroup xxx /dev/cgroup
+# mount -t cgroup xxx /sys/fs/cgroup
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
if cpusets are enabled the user will have to populate the cpus and mems files
for each new cgroup created before that group can be used.
+As explained in section `1.2 Why are cgroups needed?' you should create
+different hierarchies of cgroups for each single resource or group of
+resources you want to control. Therefore, you should mount a tmpfs on
+/sys/fs/cgroup and create directories for each cgroup resource or resource
+group.
+
+# mount -t tmpfs cgroup_root /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/rg1
+
To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
-# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
+# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
To change the set of subsystems bound to a mounted hierarchy, just
remount with different options:
-# mount -o remount,cpuset,blkio hier1 /dev/cgroup
+# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1
Now memory is removed from the hierarchy and blkio is added.
Note this will add blkio to the hierarchy but won't remove memory or
cpuset, because the new options are appended to the old ones:
-# mount -o remount,blkio /dev/cgroup
+# mount -o remount,blkio /sys/fs/cgroup/rg1
To Specify a hierarchy's release_agent:
# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
- xxx /dev/cgroup
+ xxx /sys/fs/cgroup/rg1
Note that specifying 'release_agent' more than once will return failure.
the ability to arbitrarily bind/unbind subsystems from an existing
cgroup hierarchy is intended to be implemented in the future.
-Then under /dev/cgroup you can find a tree that corresponds to the
-tree of the cgroups in the system. For instance, /dev/cgroup
+Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
+tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
is the cgroup that holds the whole system.
If you want to change the value of release_agent:
-# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
+# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
It can also be changed via remount.
-If you want to create a new cgroup under /dev/cgroup:
-# cd /dev/cgroup
+If you want to create a new cgroup under /sys/fs/cgroup/rg1:
+# cd /sys/fs/cgroup/rg1
# mkdir my_cgroup
Now you want to do something with this cgroup.
Accounting groups can be created by first mounting the cgroup filesystem.
-# mkdir /cgroups
-# mount -t cgroup -ocpuacct none /cgroups
-
-With the above step, the initial or the parent accounting group
-becomes visible at /cgroups. At bootup, this group includes all the
-tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
-/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
-this group which is essentially the CPU time obtained by all the tasks
+# mount -t cgroup -ocpuacct none /sys/fs/cgroup
+
+With the above step, the initial or the parent accounting group becomes
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
+/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
+by this group which is essentially the CPU time obtained by all the tasks
in the system.
-New accounting groups can be created under the parent group /cgroups.
+New accounting groups can be created under the parent group /sys/fs/cgroup.
-# cd /cgroups
+# cd /sys/fs/cgroup
# mkdir g1
# echo $$ > g1
The above steps create a new group g1 and move the current shell
process (bash) into it. CPU time consumed by this bash and its children
can be obtained from g1/cpuacct.usage and the same is accumulated in
-/cgroups/cpuacct.usage also.
+/sys/fs/cgroup/cpuacct.usage also.
cpuacct.stat file lists a few statistics which further divide the
CPU time obtained by the cgroup into user and system times. Currently
To start a new job that is to be contained within a cpuset, the steps are:
- 1) mkdir /dev/cpuset
- 2) mount -t cgroup -ocpuset cpuset /dev/cpuset
+ 1) mkdir /sys/fs/cgroup/cpuset
+ 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
3) Create the new cpuset by doing mkdir's and write's (or echo's) in
- the /dev/cpuset virtual file system.
+ the /sys/fs/cgroup/cpuset virtual file system.
4) Start a task that will be the "founding father" of the new job.
5) Attach that task to the new cpuset by writing its pid to the
- /dev/cpuset tasks file for that cpuset.
+ /sys/fs/cgroup/cpuset tasks file for that cpuset.
6) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cpuset
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cpuset:
- mount -t cgroup -ocpuset cpuset /dev/cpuset
- cd /dev/cpuset
+ mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
virtual filesystem.
To mount it, type:
-# mount -t cgroup -o cpuset cpuset /dev/cpuset
+# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
-Then under /dev/cpuset you can find a tree that corresponds to the
-tree of the cpusets in the system. For instance, /dev/cpuset
+Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
+tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
is the cpuset that holds the whole system.
-If you want to create a new cpuset under /dev/cpuset:
-# cd /dev/cpuset
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
+# cd /sys/fs/cgroup/cpuset
# mkdir my_cpuset
Now you want to do something with this cpuset.
The command
-mount -t cpuset X /dev/cpuset
+mount -t cpuset X /sys/fs/cgroup/cpuset
is equivalent to
-mount -t cgroup -ocpuset,noprefix X /dev/cpuset
-echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
+mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
+echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
2.2 Adding/removing cpus
------------------------
An entry is added using devices.allow, and removed using
devices.deny. For instance
- echo 'c 1:3 mr' > /cgroups/1/devices.allow
+ echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
allows cgroup 1 to read and mknod the device usually known as
/dev/null. Doing
- echo a > /cgroups/1/devices.deny
+ echo a > /sys/fs/cgroup/1/devices.deny
will remove the default 'a *:* rwm' entry. Doing
- echo a > /cgroups/1/devices.allow
+ echo a > /sys/fs/cgroup/1/devices.allow
will add the 'a *:* rwm' entry to the whitelist.
* Examples of usage :
- # mkdir /containers
- # mount -t cgroup -ofreezer freezer /containers
- # mkdir /containers/0
- # echo $some_pid > /containers/0/tasks
+ # mkdir /sys/fs/cgroup/freezer
+ # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
+ # mkdir /sys/fs/cgroup/freezer/0
+ # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
to get status of the freezer subsystem :
- # cat /containers/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
to freeze all tasks in the container :
- # echo FROZEN > /containers/0/freezer.state
- # cat /containers/0/freezer.state
+ # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
FREEZING
- # cat /containers/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
- # echo THAWED > /containers/0/freezer.state
- # cat /containers/0/freezer.state
+ # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
This is the basic mechanism which should do the right thing for user space task
Memory Resource Controller
-NOTE: The Memory Resource Controller has been generically been referred
- to as the memory controller in this document. Do not confuse memory
- controller used here with the memory controller that is used in hardware.
+NOTE: The Memory Resource Controller has generically been referred to as the
+ memory controller in this document. Do not confuse memory controller
+ used here with the memory controller that is used in hardware.
(For editors)
In this document:
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate # set/show controls of moving charges
memory.oom_control # set/show oom controls.
+ memory.numa_stat # show the number of memory usage per numa node
1. History
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
-Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
+Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
OS point of view.
* What happens when a cgroup hits memory.memsw.limit_in_bytes
-When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
in this cgroup. Then, swap-out will not be done by cgroup routine and file
caches are dropped. But as mentioned above, global LRU can do swapout memory
from it for sanity of the system's memory management state. You can't forbid
c. Enable CONFIG_CGROUP_MEM_RES_CTLR
d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
-1. Prepare the cgroups
-# mkdir -p /cgroups
-# mount -t cgroup none /cgroups -o memory
+1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
+# mount -t tmpfs none /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/memory
+# mount -t cgroup none /sys/fs/cgroup/memory -o memory
2. Make the new group and move bash into it
-# mkdir /cgroups/0
-# echo $$ > /cgroups/0/tasks
+# mkdir /sys/fs/cgroup/memory/0
+# echo $$ > /sys/fs/cgroup/memory/0/tasks
Since now we're in the 0 cgroup, we can alter the memory limit:
-# echo 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
-# cat /cgroups/0/memory.limit_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
4194304
We can check the usage:
-# cat /cgroups/0/memory.usage_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
1216512
A successful write to this file does not guarantee a successful set of
If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
value in memory.stat(see 5.2).
+5.6 numa_stat
+
+This is similar to numa_maps but operates on a per-memcg basis. This is
+useful for providing visibility into the numa locality information within
+an memcg since the pages are allowed to be allocated from any physical
+node. One of the usecases is evaluating application performance by
+combining this information with the application's cpu allocation.
+
+We export "total", "file", "anon" and "unevictable" pages per-node for
+each memcg. The ouput format of memory.numa_stat is:
+
+total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+
+And we have total = file + anon + unevictable.
+
6. Hierarchy support
The memory controller supports a deep hierarchy and hierarchical accounting.
cgroup filesystem. Consider for example, the following cgroup filesystem
hierarchy
- root
+ root
/ | \
- / | \
- a b c
- | \
- | \
- d e
+ / | \
+ a b c
+ | \
+ | \
+ d e
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),
----------------------------
-What: namespace cgroup (ns_cgroup)
-When: 2.6.38
-Why: The ns_cgroup leads to some problems:
- * cgroup creation is out-of-control
- * cgroup name can conflict when pids are looping
- * it is not possible to have a single process handling
- a lot of namespaces without falling in a exponential creation time
- * we may want to create a namespace without creating a cgroup
-
- The ns_cgroup is replaced by a compatibility flag 'clone_children',
- where a newly created cgroup will copy the parent cgroup values.
- The userspace has to manually create a cgroup and add a task to
- the 'tasks' file.
-Who: Daniel Lezcano <daniel.lezcano@free.fr>
-
-----------------------------
-
What: iwlwifi disable_hw_scan module parameters
When: 2.6.40
Why: Hareware scan is the prefer method for iwlwifi devices for
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
user-space applications.
-Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
+
+Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
+architectures.
Usage
-----
sync_min
sync_max
The two values, given as numbers of sectors, indicate a range
- withing the array where 'check'/'repair' will operate. Must be
+ within the array where 'check'/'repair' will operate. Must be
a multiple of chunk_size. When it reaches "sync_max" it will
pause, rather than complete.
You can use 'select' or 'poll' on "sync_completed" to wait for
size_t %zu or %zx
ssize_t %zd or %zx
-Raw pointer value SHOULD be printed with %p.
+Raw pointer value SHOULD be printed with %p. The kernel supports
+the following extended format specifiers for pointer types:
+
+Symbols/Function Pointers:
+
+ %pF versatile_init+0x0/0x110
+ %pf versatile_init
+ %pS versatile_init+0x0/0x110
+ %ps versatile_init
+ %pB prev_fn_of_versatile_init+0x88/0x88
+
+ For printing symbols and function pointers. The 'S' and 's' specifiers
+ result in the symbol name with ('S') or without ('s') offsets. Where
+ this is used on a kernel without KALLSYMS - the symbol address is
+ printed instead.
+
+ The 'B' specifier results in the symbol name with offsets and should be
+ used when printing stack backtraces. The specifier takes into
+ consideration the effect of compiler optimisations which may occur
+ when tail-call's are used and marked with the noreturn GCC attribute.
+
+ On ia64, ppc64 and parisc64 architectures function pointers are
+ actually function descriptors which must first be resolved. The 'F' and
+ 'f' specifiers perform this resolution and then provide the same
+ functionality as the 'S' and 's' specifiers.
+
+Kernel Pointers:
+
+ %pK 0x01234567 or 0x0123456789abcdef
+
+ For printing kernel pointers which should be hidden from unprivileged
+ users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+ Documentation/sysctl/kernel.txt for more details.
+
+Struct Resources:
+
+ %pr [mem 0x60000000-0x6fffffff flags 0x2200] or
+ [mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+ %pR [mem 0x60000000-0x6fffffff pref] or
+ [mem 0x0000000060000000-0x000000006fffffff pref]
+
+ For printing struct resources. The 'R' and 'r' specifiers result in a
+ printed resource with ('R') or without ('r') a decoded flags member.
+
+MAC/FDDI addresses:
+
+ %pM 00:01:02:03:04:05
+ %pMF 00-01-02-03-04-05
+ %pm 000102030405
+
+ For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
+ specifiers result in a printed address with ('M') or without ('m') byte
+ separators. The default byte separator is the colon (':').
+
+ Where FDDI addresses are concerned the 'F' specifier can be used after
+ the 'M' specifier to use dash ('-') separators instead of the default
+ separator.
+
+IPv4 addresses:
+
+ %pI4 1.2.3.4
+ %pi4 001.002.003.004
+ %p[Ii][hnbl]
+
+ For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
+ specifiers result in a printed address with ('i4') or without ('I4')
+ leading zeros.
+
+ The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
+ host, network, big or little endian order addresses respectively. Where
+ no specifier is provided the default network/big endian order is used.
+
+IPv6 addresses:
+
+ %pI6 0001:0002:0003:0004:0005:0006:0007:0008
+ %pi6 00010002000300040005000600070008
+ %pI6c 1:2:3:4:5:6:7:8
+
+ For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
+ specifiers result in a printed address with ('I6') or without ('i6')
+ colon-separators. Leading zeros are always used.
+
+ The additional 'c' specifier can be used with the 'I' specifier to
+ print a compressed IPv6 address as described by
+ http://tools.ietf.org/html/rfc5952
+
+UUID/GUID addresses:
+
+ %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f
+ %pUB 00010203-0405-0607-0809-0A0B0C0D0E0F
+ %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f
+ %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F
+
+ For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+ 'b' and 'B' specifiers are used to specify a little endian order in
+ lower ('l') or upper case ('L') hex characters - and big endian order
+ in lower ('b') or upper case ('B') hex characters.
+
+ Where no additional specifiers are used the default little endian
+ order with lower case hex characters will be printed.
+
+struct va_format:
+
+ %pV
+
+ For printing struct va_format structures. These contain a format string
+ and va_list as follows:
+
+ struct va_format {
+ const char *fmt;
+ va_list *va;
+ };
+
+ Do not use this feature without some mechanism to verify the
+ correctness of the format string and va_list arguments.
u64 SHOULD be printed with %llu/%llx, (unsigned long long):
Thank you for your cooperation and attention.
-By Randy Dunlap <rdunlap@xenotime.net>
+By Randy Dunlap <rdunlap@xenotime.net> and
+Andrew Murray <amurray@mpc-data.co.uk>
group created using the pseudo filesystem. See example steps below to create
task groups and modify their CPU share using the "cgroups" pseudo filesystem.
- # mkdir /dev/cpuctl
- # mount -t cgroup -ocpu none /dev/cpuctl
- # cd /dev/cpuctl
+ # mount -t tmpfs cgroup_root /sys/fs/cgroup
+ # mkdir /sys/fs/cgroup/cpu
+ # mount -t cgroup -ocpu none /sys/fs/cgroup/cpu
+ # cd /sys/fs/cgroup/cpu
# mkdir multimedia # create "multimedia" group of tasks
# mkdir browser # create "browser" group of tasks
Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
CPU bandwidth to task groups.
-This uses the /cgroup virtual file system and
-"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
-control group.
+This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
+to control the CPU time reserved for each control group.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
===============
There is work in progress to make the scheduling period for each group
-("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
+("<cgroup>/cpu.rt_period_us") configurable as well.
The constraint on the period is that a subgroup must have a smaller or
equal period to its parent. But realistically its not very useful _yet_
of the memcg.
Example:
- mkdir /cgroup/hwpoison
+ mkdir /sys/fs/cgroup/mem/hwpoison
usemem -m 100 -s 1000 &
- echo `jobs -p` > /cgroup/hwpoison/tasks
+ echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks
- memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
+ memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ')
echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
page-types -p `pidof init` --hwpoison # shall do nothing
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
-F: arch/x86/kernel/cpu/cpufreq/
F: drivers/cpufreq/
F: include/linux/cpufreq.h
F: drivers/leds/
F: include/linux/leds.h
+LEGACY EEPROM DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+S: Maintained
+F: Documentation/misc-devices/eeprom
+F: drivers/misc/eeprom/eeprom.c
+
LEGO USB Tower driver
M: Juergen Stuber <starblue@users.sourceforge.net>
L: legousb-devel@lists.sourceforge.net
F: mm/
MEMORY RESOURCE CONTROLLER
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: linux-mm@kvack.org
F: arch/*/include/asm/percpu.h
PER-TASK DELAY ACCOUNTING
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
F: Documentation/target/
TASKSTATS STATISTICS INTERFACE
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
F: Documentation/filesystems/vfat.txt
F: fs/fat/
+VIDEOBUF2 FRAMEWORK
+M: Pawel Osciak <pawel@osciak.com>
+M: Marek Szyprowski <m.szyprowski@samsung.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/video/videobuf2-*
+F: include/media/videobuf2-*
+
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
VERSION = 3
PATCHLEVEL = 0
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Sneaky Weasel
# *DOCUMENTATION*
return -EFAULT;
len = namelen;
- if (namelen > 32)
+ if (len > 32)
len = 32;
down_read(&uts_sem);
down_read(&uts_sem);
res = sysinfo_table[offset];
len = strlen(res)+1;
- if (len > count)
+ if ((unsigned long)len > (unsigned long)count)
len = count;
if (copy_to_user(buf, res, len))
err = -EFAULT;
return 1;
case GSI_GET_HWRPB:
- if (nbytes < sizeof(*hwrpb))
+ if (nbytes > sizeof(*hwrpb))
return -EINVAL;
if (copy_to_user(buffer, hwrpb, nbytes) != 0)
return -EFAULT;
{
struct rusage r;
long ret, err;
+ unsigned int status = 0;
mm_segment_t old_fs;
if (!ur)
old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
+ ret = sys_wait4(pid, (unsigned int __user *) &status, options,
+ (struct rusage __user *) &r);
set_fs (old_fs);
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
return -EFAULT;
err = 0;
+ err |= put_user(status, ustatus);
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
.word 0xff0ffff0
- b __arm926ejs_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __arm926ejs_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_SA1100=m
CONFIG_EXT2_FS=m
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SA1100=m
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_PXA=m
CONFIG_EXT2_FS=y
unsigned long dt_root;
const char *model;
+ if (!dt_phys)
+ return NULL;
+
devtree = phys_to_virt(dt_phys);
/* check device tree validity */
usr_entry
kuser_cmpxchg_check
+#ifdef CONFIG_IRQSOFF_TRACER
+ bl trace_hardirqs_off
+#endif
+
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
#endif
mov why, #0
- b ret_to_user
+ b ret_to_user_from_irq
UNWIND(.fnend )
ENDPROC(__irq_usr)
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
+ENTRY(ret_to_user_from_irq)
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
arch_ret_to_user r1, lr
restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
ENDPROC(ret_to_user)
/*
fs = get_fs();
set_fs(KERNEL_DS);
- for (i = -4; i < 1; i++) {
+ for (i = -4; i < 1 + !!thumb; i++) {
unsigned int val, bad;
if (thumb)
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- if (!pte_present(*pte) || !pte_dirty(*pte)) {
+ if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}
.resource = da850_mcasp_resources,
};
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
/*-------------------------------------------------------------------------*/
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
static void
gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+ struct davinci_gpio_regs __iomem *g;
u32 mask = 0xffff;
+ g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+
/* we only care about one bank */
if (irq & 1)
mask <<= 16;
/* set up all irqs in this bank */
irq_set_chained_handler(bank_irq, gpio_irq_handler);
- irq_set_chip_data(bank_irq, (__force void *)g);
- irq_set_handler_data(bank_irq, (void *)irq);
+ irq_set_handler_data(bank_irq, (__force void *)g);
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
irq_set_chip(irq, &gpio_irqchip);
}
};
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device ep93xx_eth_device = {
.name = "ep93xx-eth",
.id = -1,
.dev = {
- .platform_data = &ep93xx_eth_data,
+ .platform_data = &ep93xx_eth_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_eth_dma_mask,
},
.num_resources = ARRAY_SIZE(ep93xx_eth_resource),
.resource = ep93xx_eth_resource,
help
Common setup code for the camera interfaces.
+config EXYNOS4_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
# machine support
menu "EXYNOS4 Machines"
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_USB_HSPHY,
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
#ifndef __PLAT_S5P_REGS_USB_PHY_H
#define __PLAT_S5P_REGS_USB_PHY_H
-#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-usb-phy.h>
+#include <plat/cpu.h>
+#include <plat/usb-phy.h>
+
+static int exynos4_usb_phy1_init(struct platform_device *pdev)
+{
+ struct clk *otg_clk;
+ struct clk *xusbxti_clk;
+ u32 phyclk;
+ u32 rstcon;
+ int err;
+
+ otg_clk = clk_get(&pdev->dev, "otg");
+ if (IS_ERR(otg_clk)) {
+ dev_err(&pdev->dev, "Failed to get otg clock\n");
+ return PTR_ERR(otg_clk);
+ }
+
+ err = clk_enable(otg_clk);
+ if (err) {
+ clk_put(otg_clk);
+ return err;
+ }
+
+ writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
+ S5P_USBHOST_PHY_CONTROL);
+
+ /* set clock frequency for PLL */
+ phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
+
+ xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
+ if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 12 * MHZ:
+ phyclk |= CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ phyclk |= CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti_clk);
+ }
+
+ writel(phyclk, EXYNOS4_PHYCLK);
+
+ /* floating prevention logic: disable */
+ writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
+
+ /* set to normal HSIC 0 and 1 of PHY1 */
+ writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK),
+ EXYNOS4_PHYPWR);
+
+ /* set to normal standard USB of PHY1 */
+ writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR);
+
+ /* reset all ports of both PHY and Link */
+ rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK |
+ PHY1_SWRST_MASK;
+ writel(rstcon, EXYNOS4_RSTCON);
+ udelay(10);
+
+ rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
+ writel(rstcon, EXYNOS4_RSTCON);
+ udelay(50);
+
+ clk_disable(otg_clk);
+ clk_put(otg_clk);
+
+ return 0;
+}
+
+static int exynos4_usb_phy1_exit(struct platform_device *pdev)
+{
+ struct clk *otg_clk;
+ int err;
+
+ otg_clk = clk_get(&pdev->dev, "otg");
+ if (IS_ERR(otg_clk)) {
+ dev_err(&pdev->dev, "Failed to get otg clock\n");
+ return PTR_ERR(otg_clk);
+ }
+
+ err = clk_enable(otg_clk);
+ if (err) {
+ clk_put(otg_clk);
+ return err;
+ }
+
+ writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN),
+ EXYNOS4_PHYPWR);
+
+ writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE,
+ S5P_USBHOST_PHY_CONTROL);
+
+ clk_disable(otg_clk);
+ clk_put(otg_clk);
+
+ return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_HOST)
+ return exynos4_usb_phy1_init(pdev);
+
+ return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_HOST)
+ return exynos4_usb_phy1_exit(pdev);
+
+ return -EINVAL;
+}
return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
}
+#ifdef CONFIG_PM
static void exynos4_pwm4_resume(struct clocksource *cs)
{
unsigned long pclk;
exynos4_pwm_init(4, ~0);
exynos4_pwm_start(4, 1);
}
+#endif
struct clocksource pwm_clocksource = {
.name = "pwm_timer4",
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/regs-pmu.h>
-#include <mach/regs-usb-phy.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
-
-static int exynos4_usb_phy1_init(struct platform_device *pdev)
-{
- struct clk *otg_clk;
- struct clk *xusbxti_clk;
- u32 phyclk;
- u32 rstcon;
- int err;
-
- otg_clk = clk_get(&pdev->dev, "otg");
- if (IS_ERR(otg_clk)) {
- dev_err(&pdev->dev, "Failed to get otg clock\n");
- return PTR_ERR(otg_clk);
- }
-
- err = clk_enable(otg_clk);
- if (err) {
- clk_put(otg_clk);
- return err;
- }
-
- writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
- S5P_USBHOST_PHY_CONTROL);
-
- /* set clock frequency for PLL */
- phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
-
- xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
- if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
- switch (clk_get_rate(xusbxti_clk)) {
- case 12 * MHZ:
- phyclk |= CLKSEL_12M;
- break;
- case 24 * MHZ:
- phyclk |= CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- break;
- }
- clk_put(xusbxti_clk);
- }
-
- writel(phyclk, EXYNOS4_PHYCLK);
-
- /* floating prevention logic: disable */
- writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
-
- /* set to normal HSIC 0 and 1 of PHY1 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK),
- EXYNOS4_PHYPWR);
-
- /* set to normal standard USB of PHY1 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR);
-
- /* reset all ports of both PHY and Link */
- rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK |
- PHY1_SWRST_MASK;
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(10);
-
- rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(50);
-
- clk_disable(otg_clk);
- clk_put(otg_clk);
-
- return 0;
-}
-
-static int exynos4_usb_phy1_exit(struct platform_device *pdev)
-{
- struct clk *otg_clk;
- int err;
-
- otg_clk = clk_get(&pdev->dev, "otg");
- if (IS_ERR(otg_clk)) {
- dev_err(&pdev->dev, "Failed to get otg clock\n");
- return PTR_ERR(otg_clk);
- }
-
- err = clk_enable(otg_clk);
- if (err) {
- clk_put(otg_clk);
- return err;
- }
-
- writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN),
- EXYNOS4_PHYPWR);
-
- writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE,
- S5P_USBHOST_PHY_CONTROL);
-
- clk_disable(otg_clk);
- clk_put(otg_clk);
-
- return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
- if (type == S5P_USB_PHY_HOST)
- return exynos4_usb_phy1_init(pdev);
-
- return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
- if (type == S5P_USB_PHY_HOST)
- return exynos4_usb_phy1_exit(pdev);
-
- return -EINVAL;
-}
clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+ ce->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(ce);
}
#include <asm/hardware/debug-8250.S>
#else
+#include <mach/hardware.h>
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.else
mov \rp, #0
.endif
- orr \rv, \rp, #0x42000000
- orr \rp, \rp, #dc21285_high
+ orr \rv, \rp, #dc21285_high
+ orr \rp, \rp, #0x42000000
.endm
.macro senduart,rd,rx
#include <linux/err.h>
#include <linux/mutex.h>
+#include <asm/processor.h> /* for cpu_relax() */
+
#include <mach/mxs.h>
#define OCOTP_WORD_OFFSET 0x20
obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += irq.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
unsigned long tmp, tmp1;
void __iomem *reg = NULL;
- if (ch == DMC0)
+ if (ch == DMC0) {
reg = (S5P_VA_DMC0 + 0x30);
- else if (ch == DMC1)
+ } else if (ch == DMC1) {
reg = (S5P_VA_DMC1 + 0x30);
- else
+ } else {
printk(KERN_ERR "Cannot find DMC port\n");
+ return;
+ }
/* Find current DRAM frequency */
tmp = s5pv210_dram_conf[ch].freq;
}
static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_NONREMOVABLE,
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
};
* ------+--------------------+--------------------+-------
* IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
* IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
- * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low
+ * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
* IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
* IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
* IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
* But don't select both drivers in same time.
* These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
*
* Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports SHARD IRQ,
+ * This mean its register will be broken if it supports shared IRQ,
*/
/*
clk_put(hdmi_ick);
}
-/* USB1 (Host) */
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+ unsigned int usbphyaddr;
+ unsigned int usbcrcaddr;
+ struct renesas_usbhs_platform_info info;
+ struct delayed_work work;
+ struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), \
+ struct usbhs_private, info)
+
+#define usbhs_is_connected(priv) \
+ (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+ return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ /* init phy */
+ __raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+ struct usbhs_private *priv = container_of(work, struct usbhs_private,
+ work.work);
+
+ renesas_usbhs_call_notify_hotplug(priv->pdev);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ priv->pdev = pdev;
+ INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+ return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+ .usbcrcaddr = 0xe605810c, /* USBCR2 */
+ .info = {
+ .platform_callback = {
+ .hardware_init = usbhs0_hardware_init,
+ .hardware_exit = usbhs0_hardware_exit,
+ .phy_reset = usbhs_phy_reset,
+ .get_id = usbhs0_get_id,
+ .get_vbus = usbhs_get_vbus,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ },
+ },
+};
+
+static struct resource usbhs0_resources[] = {
+ [0] = {
+ .name = "USBHS0",
+ .start = 0xe6890000,
+ .end = 0xe68900e6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs0_device = {
+ .name = "renesas_usbhs",
+ .id = 0,
+ .dev = {
+ .platform_data = &usbhs0_private.info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs0_resources),
+ .resource = usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ */
+#define IRQ8 evt2irq(0x0300)
+
+/* USBHS1 USB Host support via r8a66597_hcd */
static void usb1_host_port_power(int port, int power)
{
if (!power) /* only power-on is supported for now */
static struct resource usb1_host_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.resource = usb1_host_resources,
};
-/* USB1 (Function) */
+/* USBHS1 USB Function support via renesas_usbhs */
+
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
#define USB_PHY_OFF (1 << 0)
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
-struct usbhs_private {
- unsigned int irq;
- unsigned int usbphyaddr;
- unsigned int usbcrcaddr;
- struct renesas_usbhs_platform_info info;
-};
-
-#define usbhs_get_priv(pdev) \
- container_of(renesas_usbhs_get_info(pdev), \
- struct usbhs_private, info)
-
-#define usbhs_is_connected(priv) \
- (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static int usbhs1_get_vbus(struct platform_device *pdev)
-{
- return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
static irqreturn_t usbhs1_interrupt(int irq, void *data)
{
struct platform_device *pdev = data;
struct usbhs_private *priv = usbhs_get_priv(pdev);
int ret;
- irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
-
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+ ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
dev_name(&pdev->dev), pdev);
if (ret) {
dev_err(&pdev->dev, "request_irq err\n");
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- free_irq(priv->irq, pdev);
+ free_irq(IRQ8, pdev);
}
-static void usbhs1_phy_reset(struct platform_device *pdev)
+static int usbhs1_get_id(struct platform_device *pdev)
{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* init phy */
- __raw_writew(0x8a0a, priv->usbcrcaddr);
+ return USBHS_GADGET;
}
static u32 usbhs1_pipe_cfg[] = {
};
static struct usbhs_private usbhs1_private = {
- .irq = evt2irq(0x0300), /* IRQ8 */
- .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */
- .usbcrcaddr = 0xE6058130, /* USBCR4 */
+ .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
+ .usbcrcaddr = 0xe6058130, /* USBCR4 */
.info = {
.platform_callback = {
.hardware_init = usbhs1_hardware_init,
.hardware_exit = usbhs1_hardware_exit,
- .phy_reset = usbhs1_phy_reset,
.get_id = usbhs1_get_id,
- .get_vbus = usbhs1_get_vbus,
+ .phy_reset = usbhs_phy_reset,
+ .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
static struct resource usbhs1_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.resource = usbhs1_resources,
};
-
/* LED */
static struct gpio_led mackerel_leds[] = {
{
&nor_flash_device,
&smc911x_device,
&lcdc_device,
+ &usbhs0_device,
&usb1_host_device,
&usbhs1_device,
&leds_device,
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define GPIO_PORT167CR 0xE60520A7
#define GPIO_PORT168CR 0xE60520A8
#define SRCR4 0xe61580bc
#define USCCR1 0xE6058144
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
gpio_direction_output(GPIO_PORT151, 1);
- /* USB enable */
- gpio_request(GPIO_FN_VBUS0_1, NULL);
- gpio_request(GPIO_FN_IDIN_1_18, NULL);
- gpio_request(GPIO_FN_PWEN_1_115, NULL);
- gpio_request(GPIO_FN_OVCN_1_114, NULL);
- gpio_request(GPIO_FN_EXTLP_1, NULL);
- gpio_request(GPIO_FN_OVCN2_1, NULL);
- gpio_pull_down(GPIO_PORT168CR);
-
- /* setup USB phy */
- __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */
+ /* USBHS0 */
+ gpio_request(GPIO_FN_VBUS0_0, NULL);
+ gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+
+ /* USBHS1 */
+ gpio_request(GPIO_FN_VBUS0_1, NULL);
+ gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+ gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+ /* USB phy tweak to make the r8a66597_hcd host driver work */
+ __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
return IRQ_HANDLED;
}
+static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0; /* always allow wakeup */
+}
+
void __init sh73a0_init_irq(void)
{
void __iomem *gic_dist_base = __io(0xf0001000);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc00), evt2irq(0xc00),
evt2irq(0xc00), evt2irq(0xc00) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc20), evt2irq(0xc20),
evt2irq(0xc20), evt2irq(0xc20) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc40), evt2irq(0xc40),
evt2irq(0xc40), evt2irq(0xc40) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc60), evt2irq(0xc60),
evt2irq(0xc60), evt2irq(0xc60) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd20), evt2irq(0xd20),
evt2irq(0xd20), evt2irq(0xd20) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd40), evt2irq(0xd40),
evt2irq(0xd40), evt2irq(0xd40) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFB,
.irqs = { evt2irq(0xd60), evt2irq(0xd60),
evt2irq(0xd60), evt2irq(0xd60) },
};
bool reset;
__u16 clk_val;
__s8 usecount;
- __u32 res_reg;
+ void __iomem * res_reg;
__u16 res_mask;
bool hw_ctrld;
* the defines are used for setting up the I/O memory mapping.
*/
+#ifdef __ASSEMBLER__
+#define IOMEM(a) (a)
+#else
+#define IOMEM(a) (void __iomem *) a
+#endif
+
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
#define U300_SEMI_CONFIG_BASE 0x30000000
#endif
-/*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
/*
* AHB peripherals
*/
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
* Virtual accessor macros for static devices
*/
-
#endif
/* Use general purpose timer 2 as clock source */
if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
- printk(KERN_ERR "timer: failed to initialize clock "
- "source %s\n", clocksource_u300_1mhz.name);
+ pr_err("timer: failed to initialize U300 clock source\n");
clockevents_calc_mult_shift(&clockevent_u300_1mhz,
rate, APPTIMER_MIN_RANGE);
/* No custom data yet */
};
+ if (cpu_is_u8500v2())
+ pdata.supports_sleepmode = true;
+
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
},
};
-static void __init v2m_init_early(void)
-{
- ct_desc->init_early();
- versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
-}
-
static void __init v2m_timer_init(void)
{
u32 scctrl;
},
};
+static void __init v2m_init_early(void)
+{
+ ct_desc->init_early();
+ clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+ versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+}
+
static void v2m_power_off(void)
{
if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
{
int i;
- clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
/*
* We fork()ed a process, and we need a new context for the child
- * to run in.
+ * to run in. We reserve version 0 for initial tasks so we will
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
static void flush_context(void)
{
- u32 ttb;
- /* Copy TTBR1 into TTBR0 */
- asm volatile("mrc p15, 0, %0, c2, c0, 1\n"
- "mcr p15, 0, %0, c2, c0, 0"
- : "=r" (ttb));
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
return;
smp_rmb();
- asid = cpu_last_asid + cpu;
+ asid = cpu_last_asid + cpu + 1;
flush_context();
set_mm_context(mm, asid);
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
- asid = cpu_last_asid + smp_processor_id();
+ asid = cpu_last_asid + smp_processor_id() + 1;
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
- cpu_last_asid += NR_CPUS - 1;
+ cpu_last_asid += NR_CPUS;
}
set_mm_context(mm, asid);
memblock_reserve(__pa(_stext), _end - _stext);
#endif
#ifdef CONFIG_BLK_DEV_INITRD
+ if (phys_initrd_size &&
+ !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
+ pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
+ phys_initrd_start, phys_initrd_size);
+ phys_initrd_start = phys_initrd_size = 0;
+ }
if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
" .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .text : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .data : 0x%p" " - 0x%p" " (%4d kB)\n",
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
(PAGE_SIZE)),
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
- MLK_ROUNDUP(_sdata, _edata));
+ MLK_ROUNDUP(_sdata, _edata),
+ MLK_ROUNDUP(__bss_start, __bss_stop));
#undef MLK
#undef MLM
.long 0
.long 0
.long v4_cache_fns
- .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
+ .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
.type __triscenda7_proc_info, #object
__triscenda7_proc_info:
.long 0
.long 0
.long v4_cache_fns
- .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
+ .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
.type __p2001_proc_info, #object
__p2001_proc_info:
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
- mrc p15, 0, r2, c2, c0, 1 @ load TTB 1
- mcr p15, 0, r2, c2, c0, 0 @ into TTB 0
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
+ isb
+1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
- mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
- isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)
#endif
#ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51_to1 = {
+static struct sdma_script_start_addrs addr_imx51 = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
#if defined(CONFIG_SOC_IMX51)
if (cpu_is_mx51()) {
- imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
+ int to_version = mx51_revision() >> 4;
+ imx51_imx_sdma_data.pdata.to_version = to_version;
+ imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
} else
#endif
int num_gpio;
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
};
#endif /* __ASM_PLAT_GPIO_H */
#ifdef CONFIG_PM
-static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
+static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
{
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
irqdbf("s3c2410: registered interrupt handlers\n");
}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
.num_resources = ARRAY_SIZE(s5p_onenand_resources),
.resource = s5p_onenand_resources,
};
-
-void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s5p_device_onenand.dev.platform_data = pd;
-}
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
-#define S5P_VA_USB_HSPHY S3C_ADDR(0x02900000)
+#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
.num_resources = ARRAY_SIZE(s3c_onenand_resources),
.resource = s3c_onenand_resources,
};
-
-void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s3c_device_onenand.dev.platform_data = pd;
-}
extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_spi0;
extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p6440_device_spi0;
-extern struct platform_device s5p6440_device_spi1;
-extern struct platform_device s5p6450_device_spi0;
-extern struct platform_device s5p6450_device_spi1;
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s3c_device_hwmon;
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_AT32AP700X=m
CONFIG_DMADEVICES=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
CONFIG_MODULES=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
*/
#define start_thread(regs, new_pc, new_sp) \
do { \
- set_fs(USER_DS); \
memset(regs, 0, sizeof(*regs)); \
regs->sr = MODE_USER; \
regs->pc = new_pc & ~1; \
data->regs = (void __iomem *)pdev->resource[0].start;
}
+ pdev->id = line;
pdata = pdev->dev.platform_data;
- pdata->num = portnr;
+ pdata->num = line;
at32_usarts[line] = pdev;
}
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
#define cpu_is_at91cap9() (0)
+#define cpu_is_at91cap9_revB() (0)
+#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
+#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
+#define cpu_is_at91sam9m10() (0)
+#define cpu_is_at91sam9g46() (0)
+#define cpu_is_at91sam9m11() (0)
+#define cpu_is_at91sam9x5() (0)
+#define cpu_is_at91sam9g15() (0)
+#define cpu_is_at91sam9g35() (0)
+#define cpu_is_at91sam9x35() (0)
+#define cpu_is_at91sam9g25() (0)
+#define cpu_is_at91sam9x25() (0)
#endif /* __ASM_ARCH_CPU_H */
return 0;
}
-static int intc_resume(void)
+static void intc_resume(void)
{
int i;
for (i = 0; i < 64; i++)
intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]);
-
- return 0;
}
#else
#define intc_suspend NULL
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=m
CONFIG_SDH_BFIN=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=m
CONFIG_EXT2_FS=m
# CONFIG_DNOTIFY is not set
bool
default n
+config M68000
+ bool
+ help
+ The Freescale (was Motorola) 68000 CPU is the first generation of
+ the well known M68K family of processors. The CPU core as well as
+ being available as a stand alone CPU was also used in many
+ System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+ a paging MMU.
+
+config MCPU32
+ bool
+ help
+ The Freescale (was then Motorola) CPU32 is a CPU core that is
+ based on the 68020 processor. For the most part it is used in
+ System-On-Chip parts, and does not contain a paging MMU.
+
+config COLDFIRE
+ bool
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ The Freescale ColdFire family of processors is a modern derivitive
+ of the 68000 processor family. They are mainly targeted at embedded
+ applications, and are all System-On-Chip (SOC) devices, as opposed
+ to stand alone CPUs. They implement a subset of the original 68000
+ processor instruction set.
+
config COLDFIRE_SW_A7
bool
default n
config M68328
bool "MC68328"
+ select M68000
help
Motorola 68328 processor support.
config M68EZ328
bool "MC68EZ328"
+ select M68000
help
Motorola 68EX328 processor support.
config M68VZ328
bool "MC68VZ328"
+ select M68000
help
Motorola 68VZ328 processor support.
config M68360
bool "MC68360"
+ select MCPU32
help
Motorola 68360 processor support.
config M5206
bool "MCF5206"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M5206e
bool "MCF5206e"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M520x
bool "MCF520x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help
config M523x
bool "MCF523x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
config M5249
bool "MCF5249"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M5271
bool "MCF5271"
+ select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
config M5272
bool "MCF5272"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M5275
bool "MCF5275"
+ select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
config M528x
bool "MCF528x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
config M5307
bool "MCF5307"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
config M532x
bool "MCF532x"
+ select COLDFIRE
select HAVE_CACHE_CB
help
Freescale (Motorola) ColdFire 532x processor support.
config M5407
bool "MCF5407"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
config M547x
bool "MCF547x"
+ select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
config M548x
bool "MCF548x"
+ select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
depends on (M548x || M547x)
default y
-config COLDFIRE
- bool
- depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- default y
-
config CLOCK_SET
bool "Enable setting the CPU clock frequency"
default n
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
-#if !defined(__mc68020__) && !defined(__mc68030__) && \
- !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
/*
* Simpler 68k and ColdFire parts also need a few other gcc functions.
*/
/* Kernel symbol table: Normal symbols */
. = ALIGN(4);
__start___ksymtab = .;
- *(__ksymtab)
+ *(SORT(___ksymtab+*))
__stop___ksymtab = .;
/* Kernel symbol table: GPL-only symbols */
__start___ksymtab_gpl = .;
- *(__ksymtab_gpl)
+ *(SORT(___ksymtab_gpl+*))
__stop___ksymtab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___ksymtab_unused = .;
- *(__ksymtab_unused)
+ *(SORT(___ksymtab_unused+*))
__stop___ksymtab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___ksymtab_unused_gpl = .;
- *(__ksymtab_unused_gpl)
+ *(SORT(___ksymtab_unused_gpl+*))
__stop___ksymtab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___ksymtab_gpl_future = .;
- *(__ksymtab_gpl_future)
+ *(SORT(___ksymtab_gpl_future+*))
__stop___ksymtab_gpl_future = .;
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
- *(__kcrctab)
+ *(SORT(___kcrctab+*))
__stop___kcrctab = .;
/* Kernel symbol table: GPL-only symbols */
__start___kcrctab_gpl = .;
- *(__kcrctab_gpl)
+ *(SORT(___kcrctab_gpl+*))
__stop___kcrctab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___kcrctab_unused = .;
- *(__kcrctab_unused)
+ *(SORT(___kcrctab_unused+*))
__stop___kcrctab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___kcrctab_unused_gpl = .;
- *(__kcrctab_unused_gpl)
+ *(SORT(___kcrctab_unused_gpl+*))
__stop___kcrctab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
- *(__kcrctab_gpl_future)
+ *(SORT(___kcrctab_gpl_future+*))
__stop___kcrctab_gpl_future = .;
/* Kernel symbol table: strings */
if (temp) {
long *lto = to;
const long *lfrom = from;
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+ for (; temp; temp--)
+ *lto++ = *lfrom++;
+#else
asm volatile (
" movel %2,%3\n"
" andw #7,%3\n"
" jpl 4b"
: "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1)
: "0" (lfrom), "1" (lto), "2" (temp));
-#else
- for (; temp; temp--)
- *lto++ = *lfrom++;
#endif
to = lto;
from = lfrom;
temp = count >> 2;
if (temp) {
long *ls = s;
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+ for (; temp; temp--)
+ *ls++ = c;
+#else
size_t temp1;
asm volatile (
" movel %1,%2\n"
" jpl 1b"
: "=a" (ls), "=d" (temp), "=&d" (temp1)
: "d" (c), "0" (ls), "1" (temp));
-#else
- for (; temp; temp--)
- *ls++ = c;
#endif
s = ls;
}
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
-
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("mulu%.l %3,%1:%0" \
- : "=d" ((USItype)(w0)), \
- "=d" ((USItype)(w1)) \
- : "%0" ((USItype)(u)), \
- "dmi" ((USItype)(v)))
-
-#else
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
#define SI_TYPE_SIZE 32
#define __BITS4 (SI_TYPE_SIZE / 4)
(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
} while (0)
+#else
+
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mulu%.l %3,%1:%0" \
+ : "=d" ((USItype)(w0)), \
+ "=d" ((USItype)(w1)) \
+ : "%0" ((USItype)(u)), \
+ "dmi" ((USItype)(v)))
+
#endif
#define __umulsidi3(u, v) \
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_STORAGE=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PS3=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/spi/spi.h>
.resource = usb1_common_resources,
};
+/*
+ * USBHS
+ */
+static int usbhs_get_id(struct platform_device *pdev)
+{
+ return gpio_get_value(GPIO_PTB3);
+}
+
+static struct renesas_usbhs_platform_info usbhs_info = {
+ .platform_callback = {
+ .get_id = usbhs_get_id,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ .detection_delay = 5,
+ },
+};
+
+static struct resource usbhs_resources[] = {
+ [0] = {
+ .start = 0xa4d90000,
+ .end = 0xa4d90124 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs_device = {
+ .name = "renesas_usbhs",
+ .id = 1,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbhs_info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs_resources),
+ .resource = usbhs_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_USB1,
+ },
+};
+
/* LCDC */
const static struct fb_videomode ecovec_lcd_modes[] = {
{
&sh_eth_device,
&usb0_host_device,
&usb1_common_device,
+ &usbhs_device,
&lcdc_device,
&ceu0_device,
&ceu1_device,
$(CONFIG_BOOT_LINK_OFFSET)]')
endif
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
ifeq ($(CONFIG_MCOUNT),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
-T $(obj)/../../kernel/vmlinux.lds
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+#
+# Pull in the necessary libgcc bits from the in-kernel implementation.
+#
+lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \
+ lshrsi3.S
+lib1funcs-obj := \
+ $(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
+
+lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib
+ifeq ($(BITS),64)
+ lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir))
+endif
+
+KBUILD_CFLAGS += -I$(lib1funcs-dir)
+
+$(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE
+ $(call cmd,shipped)
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(lib1funcs-obj) FORCE
$(call if_changed,ld)
@:
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_PL2303=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SH=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
" mov.l %2, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
: "=&r" (retval),
- "+r" (m)
- : "r" (val)
+ "+r" (m),
+ "+r" (val) /* inhibit r15 overloading */
+ :
: "memory", "r0", "r1");
return retval;
" mov.b %2, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
: "=&r" (retval),
- "+r" (m)
- : "r" (val)
+ "+r" (m),
+ "+r" (val) /* inhibit r15 overloading */
+ :
: "memory" , "r0", "r1");
return retval;
" nop \n\t"
" mov r15, r1 \n\t" /* r1 = saved sp */
" mov #-8, r15 \n\t" /* LOGIN */
- " mov.l @%1, %0 \n\t" /* load old value */
- " cmp/eq %0, %2 \n\t"
+ " mov.l @%3, %0 \n\t" /* load old value */
+ " cmp/eq %0, %1 \n\t"
" bf 1f \n\t" /* if not equal */
- " mov.l %3, @%1 \n\t" /* store new value */
+ " mov.l %2, @%3 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval)
- : "r" (m), "r" (old), "r" (new)
+ : "=&r" (retval),
+ "+r" (old), "+r" (new) /* old or new can be r15 */
+ : "r" (m)
: "memory" , "r0", "r1", "t");
return retval;
#define SR_USER (SR_MMU | SR_FD)
#define start_thread(_regs, new_pc, new_sp) \
- set_fs(USER_DS); \
_regs->sr = SR_USER; /* User mode. */ \
_regs->pc = new_pc - 4; /* Compensate syscall exit */ \
_regs->pc |= 1; /* Set SHmedia ! */ \
SHDMA_SLAVE_SCIF4_RX,
SHDMA_SLAVE_SCIF5_TX,
SHDMA_SLAVE_SCIF5_RX,
+ SHDMA_SLAVE_USB0D0_TX,
+ SHDMA_SLAVE_USB0D0_RX,
+ SHDMA_SLAVE_USB0D1_TX,
+ SHDMA_SLAVE_USB0D1_RX,
+ SHDMA_SLAVE_USB1D0_TX,
+ SHDMA_SLAVE_USB1D0_RX,
+ SHDMA_SLAVE_USB1D1_TX,
+ SHDMA_SLAVE_USB1D1_RX,
SHDMA_SLAVE_SDHI0_TX,
SHDMA_SLAVE_SDHI0_RX,
SHDMA_SLAVE_SDHI1_TX,
.addr = 0xa4e50024,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x36,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D0_TX,
+ .addr = 0xA4D80100,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x73,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D0_RX,
+ .addr = 0xA4D80100,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x73,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D1_TX,
+ .addr = 0xA4D80120,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x77,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D1_RX,
+ .addr = 0xA4D80120,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x77,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D0_TX,
+ .addr = 0xA4D90100,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xab,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D0_RX,
+ .addr = 0xA4D90100,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xab,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D1_TX,
+ .addr = 0xA4D90120,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xaf,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D1_RX,
+ .addr = 0xA4D90120,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xaf,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0x04ce0030,
void start_thread(struct pt_regs *regs, unsigned long new_pc,
unsigned long new_sp)
{
- set_fs(USER_DS);
-
regs->pr = 0;
regs->sr = SR_FD;
regs->pc = new_pc;
{
unsigned int cache_type = (unsigned int)file->private;
struct cache_info *cache;
- unsigned int waysize, way, cache_size;
- unsigned long ccr, base;
- static unsigned long addrstart = 0;
+ unsigned int waysize, way;
+ unsigned long ccr;
+ unsigned long addrstart = 0;
/*
* Go uncached immediately so we don't skew the results any
}
if (cache_type == CACHE_TYPE_DCACHE) {
- base = CACHE_OC_ADDRESS_ARRAY;
+ addrstart = CACHE_OC_ADDRESS_ARRAY;
cache = ¤t_cpu_data.dcache;
} else {
- base = CACHE_IC_ADDRESS_ARRAY;
+ addrstart = CACHE_IC_ADDRESS_ARRAY;
cache = ¤t_cpu_data.icache;
}
- /*
- * Due to the amount of data written out (depending on the cache size),
- * we may be iterated over multiple times. In this case, keep track of
- * the entry position in addrstart, and rewind it when we've hit the
- * end of the cache.
- *
- * Likewise, the same code is used for multiple caches, so care must
- * be taken for bouncing addrstart back and forth so the appropriate
- * cache is hit.
- */
- cache_size = cache->ways * cache->sets * cache->linesz;
- if (((addrstart & 0xff000000) != base) ||
- (addrstart & 0x00ffffff) > cache_size)
- addrstart = base;
-
waysize = cache->sets;
/*
/*
* If mask=1, the LVT entry does not generate interrupts while mask=0
- * enables the vector. See also the BKDGs.
+ * enables the vector. See also the BKDGs. Must be called with
+ * preemption disabled.
*/
int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask)
/* Direct Legacy VGA I/O traffic to designated IOH */
int uv_set_vga_state(struct pci_dev *pdev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
int domain, bus, rc;
- PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
- pdev->devfn, decode, command_bits, change_bridge);
+ PR_DEVEL("devfn %x decode %d cmd %x flags %d\n",
+ pdev->devfn, decode, command_bits, flags);
- if (!change_bridge)
+ if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
return 0;
if ((command_bits & PCI_COMMAND_IO) == 0)
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of_pci.h>
+#include <linux/initrd.h>
#include <asm/hpet.h>
#include <asm/irq_controller.h>
return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
}
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
+}
+#endif
+
void __init add_dtb(u64 data)
{
initial_dtb = data + offsetof(struct setup_data, data);
* Powermanagement idle function, if any..
*/
void (*pm_idle)(void);
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(pm_idle);
#endif
cpu_relax();
}
}
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
#endif
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
x86_platform.nmi_init();
+ /*
+ * Wait until the cpu which brought this one up marked it
+ * online before enabling interrupts. If we don't do that then
+ * we can end up waking up the softirq thread before this cpu
+ * reached the active state, which makes the scheduler unhappy
+ * and schedule the softirq thread on the wrong cpu. This is
+ * only observable with forced threaded interrupts, but in
+ * theory it could also happen w/o them. It's just way harder
+ * to achieve.
+ */
+ while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
+ cpu_relax();
+
/* enable local interrupts */
local_irq_enable();
return 0;
}
+/*
+ * This runs only on the current cpu. We try to find an LVT offset and
+ * setup the local APIC. For this we must disable preemption. On
+ * success we initialize all nodes with this offset. This updates then
+ * the offset in the IBS_CTL per-node msr. The per-core APIC setup of
+ * the IBS interrupt vector is called from op_amd_setup_ctrs()/op_-
+ * amd_cpu_shutdown() using the new offset.
+ */
static int force_ibs_eilvt_setup(void)
{
int offset;
int ret;
- /*
- * find the next free available EILVT entry, skip offset 0,
- * pin search to this cpu
- */
preempt_disable();
+ /* find the next free available EILVT entry, skip offset 0 */
for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) {
if (get_eilvt(offset))
break;
* This has the effect of treating non-periodic like periodic.
*/
if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) {
- unsigned long m, t;
+ unsigned long m, t, mc, base, k;
+ struct hpet __iomem *hpet = devp->hd_hpet;
+ struct hpets *hpetp = devp->hd_hpets;
t = devp->hd_ireqfreq;
m = read_counter(&devp->hd_timer->hpet_compare);
- write_counter(t + m, &devp->hd_timer->hpet_compare);
+ mc = read_counter(&hpet->hpet_mc);
+ /* The time for the next interrupt would logically be t + m,
+ * however, if we are very unlucky and the interrupt is delayed
+ * for longer than t then we will completely miss the next
+ * interrupt if we set t + m and an application will hang.
+ * Therefore we need to make a more complex computation assuming
+ * that there exists a k for which the following is true:
+ * k * t + base < mc + delta
+ * (k + 1) * t + base > mc + delta
+ * where t is the interval in hpet ticks for the given freq,
+ * base is the theoretical start value 0 < base < t,
+ * mc is the main counter value at the time of the interrupt,
+ * delta is the time it takes to write the a value to the
+ * comparator.
+ * k may then be computed as (mc - base + delta) / t .
+ */
+ base = mc % t;
+ k = (mc - base + hpetp->hp_delta) / t;
+ write_counter(t * (k + 1) + base,
+ &devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
cpufreq_stats_free_table(cpu);
+ cpufreq_stats_free_sysfs(cpu);
}
}
} else {
do {
for (i = chanirq_res->start; i <= chanirq_res->end; i++) {
+ if (irq_cnt >= SH_DMAC_MAX_CHANNELS) {
+ irq_cap = 1;
+ break;
+ }
+
if ((errirq_res->flags & IORESOURCE_BITS) ==
IORESOURCE_IRQ_SHAREABLE)
chan_flag[irq_cnt] = IRQF_SHARED;
"Found IRQ %d for channel %d\n",
i, irq_cnt);
chan_irq[irq_cnt++] = i;
-
- if (irq_cnt >= SH_DMAC_MAX_CHANNELS)
- break;
}
- if (irq_cnt >= SH_DMAC_MAX_CHANNELS) {
- irq_cap = 1;
+ if (irq_cnt >= SH_DMAC_MAX_CHANNELS)
break;
- }
+
chanirq_res = platform_get_resource(pdev,
IORESOURCE_IRQ, ++irqres);
} while (irq_cnt < pdata->channel_num && chanirq_res);
* Copyright (C) 2008,2009 STMicroelectronics
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
spinlock_t lock;
+ bool sleepmode;
/* Keep track of configured edges */
u32 edge_rising;
u32 edge_falling;
* @gpio: pin number
* @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
*
- * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is
- * changed to an input (with pullup/down enabled) in sleep and deep sleep. If
- * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
- * configured even when in sleep and deep sleep.
+ * This register is actually in the pinmux layer, not the GPIO block itself.
+ * The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP
+ * mode is entered (i.e. when signal IOFORCE is HIGH by the platform code).
+ * Each GPIO can be configured to be forced into GPIO mode when IOFORCE is
+ * HIGH, overriding the normal setting defined by GPIO_AFSELx registers.
+ * When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit),
+ * the GPIOs return to the normal setting defined by GPIO_AFSELx registers.
*
- * On DB8500v2 onwards, this setting loses the previous meaning and instead
- * indicates if wakeup detection is enabled on the pin. Note that
- * enable_irq_wake() will automatically enable wakeup detection.
+ * If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO
+ * mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is
+ * entered) regardless of the altfunction selected. Also wake-up detection is
+ * ENABLED.
+ *
+ * If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains
+ * controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS
+ * (for altfunction GPIO) or respective on-chip peripherals (for other
+ * altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED.
+ *
+ * Note that enable_irq_wake() will automatically enable wakeup detection.
*/
int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
{
static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
int gpio, bool on)
{
+ if (nmk_chip->sleepmode) {
+ __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base,
+ on ? NMK_GPIO_SLPM_WAKEUP_ENABLE
+ : NMK_GPIO_SLPM_WAKEUP_DISABLE);
+ }
+
__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
}
writel(chip->fwimsc & chip->real_wake,
chip->addr + NMK_GPIO_FWIMSC);
- if (cpu_is_u8500v2()) {
+ if (chip->sleepmode) {
chip->slpm = readl(chip->addr + NMK_GPIO_SLPC);
/* 0 -> wakeup enable */
writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
- if (cpu_is_u8500v2())
+ if (chip->sleepmode)
writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
}
}
nmk_chip->secondary_parent_irq = secondary_irq;
nmk_chip->get_secondary_status = pdata->get_secondary_status;
nmk_chip->set_ioforce = pdata->set_ioforce;
+ nmk_chip->sleepmode = pdata->supports_sleepmode;
spin_lock_init(&nmk_chip->lock);
chip = &nmk_chip->chip;
MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
MODULE_DESCRIPTION("Nomadik GPIO Driver");
MODULE_LICENSE("GPL");
-
-
list_for_each_entry(entry, &dev->maplist, head) {
/*
* Because the kernel-userspace ABI is fixed at a 32-bit offset
- * while PCI resources may live above that, we ignore the map
- * offset for maps of type _DRM_FRAMEBUFFER or _DRM_REGISTERS.
- * It is assumed that each driver will have only one resource of
- * each type.
+ * while PCI resources may live above that, we only compare the
+ * lower 32 bits of the map offset for maps of type
+ * _DRM_FRAMEBUFFER or _DRM_REGISTERS.
+ * It is assumed that if a driver have more than one resource
+ * of each type, the lower 32 bits are different.
*/
if (!entry->map ||
map->type != entry->map->type ||
case _DRM_SHM:
if (map->flags != _DRM_CONTAINS_LOCK)
break;
+ return entry;
case _DRM_REGISTERS:
case _DRM_FRAME_BUFFER:
- return entry;
+ if ((entry->map->offset & 0xffffffff) ==
+ (map->offset & 0xffffffff))
+ return entry;
default: /* Make gcc happy */
;
}
kfree(map);
return -EINVAL;
}
-#endif
-#ifdef __alpha__
- map->offset += dev->hose->mem_space->start;
#endif
/* Some drivers preinitialize some maps, without the X Server
* needing to be aware of it. Therefore, we just return success
if (card_res->count_fbs >= fb_count) {
copied = 0;
fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
- list_for_each_entry(fb, &file_priv->fbs, head) {
+ list_for_each_entry(fb, &file_priv->fbs, filp_head) {
if (put_user(fb->base.id, fb_id + copied)) {
ret = -EFAULT;
goto out;
static resource_size_t drm_core_get_reg_ofs(struct drm_device *dev)
{
#ifdef __alpha__
- return dev->hose->dense_mem_base - dev->hose->mem_space->start;
+ return dev->hose->dense_mem_base;
#else
return 0;
#endif
page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
GFP_HIGHUSER | __GFP_RECLAIMABLE);
- if (IS_ERR(page))
- return PTR_ERR(page);
+ if (IS_ERR(page)) {
+ ret = PTR_ERR(page);
+ goto out;
+ }
if (do_bit17_swizzling) {
slow_shmem_bit17_copy(page,
#define mga_flush_write_combine() DRM_WRITEMEMORYBARRIER()
-#if defined(__linux__) && defined(__alpha__)
-#define MGA_BASE(reg) ((unsigned long)(dev_priv->mmio->handle))
-#define MGA_ADDR(reg) (MGA_BASE(reg) + reg)
-
-#define MGA_DEREF(reg) (*(volatile u32 *)MGA_ADDR(reg))
-#define MGA_DEREF8(reg) (*(volatile u8 *)MGA_ADDR(reg))
-
-#define MGA_READ(reg) (_MGA_READ((u32 *)MGA_ADDR(reg)))
-#define MGA_READ8(reg) (_MGA_READ((u8 *)MGA_ADDR(reg)))
-#define MGA_WRITE(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF(reg) = val; } while (0)
-#define MGA_WRITE8(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8(reg) = val; } while (0)
-
-static inline u32 _MGA_READ(u32 *addr)
-{
- DRM_MEMORYBARRIER();
- return *(volatile u32 *)addr;
-}
-#else
#define MGA_READ8(reg) DRM_READ8(dev_priv->mmio, (reg))
#define MGA_READ(reg) DRM_READ32(dev_priv->mmio, (reg))
#define MGA_WRITE8(reg, val) DRM_WRITE8(dev_priv->mmio, (reg), (val))
#define MGA_WRITE(reg, val) DRM_WRITE32(dev_priv->mmio, (reg), (val))
-#endif
#define DWGREG0 0x1c00
#define DWGREG0_END 0x1dff
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
- DRM_DEBUG("IH: CP EOP\n");
+ DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;
unsigned num_arrays;
unsigned max_indx;
unsigned color_channel_mask;
- struct r100_cs_track_array arrays[11];
+ struct r100_cs_track_array arrays[16];
struct r100_cs_track_cb cb[R300_MAX_CB];
struct r100_cs_track_cb zb;
struct r100_cs_track_cb aa;
ib = p->ib->ptr;
track = (struct r100_cs_track *)p->track;
c = radeon_get_ib_value(p, idx++) & 0x1F;
+ if (c > 16) {
+ DRM_ERROR("Only 16 vertex buffers are allowed %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
track->num_arrays = c;
for (i = 0; i < (c - 1); i+=2, idx+=3) {
r = r100_cs_packet_next_reloc(p, &reloc);
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
- DRM_DEBUG("IH: CP EOP\n");
+ DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;
uint32_t default_sclk;
uint32_t default_dispclk;
uint32_t dp_extclk;
+ uint32_t max_pixel_clock;
};
/*
}
*dcpll = *p1pll;
+ rdev->clock.max_pixel_clock = le16_to_cpu(firmware_info->info.usMaxPixelClock);
+ if (rdev->clock.max_pixel_clock == 0)
+ rdev->clock.max_pixel_clock = 40000;
+
return true;
}
p1pll->reference_div = RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
if (p1pll->reference_div < 2)
p1pll->reference_div = 12;
- p2pll->reference_div = p1pll->reference_div;
+ p2pll->reference_div = p1pll->reference_div;
/* These aren't in the device-tree */
if (rdev->family >= CHIP_R420) {
p2pll->pll_out_min = 12500;
p2pll->pll_out_max = 35000;
}
+ /* not sure what the max should be in all cases */
+ rdev->clock.max_pixel_clock = 35000;
spll->reference_freq = mpll->reference_freq = p1pll->reference_freq;
spll->reference_div = mpll->reference_div =
else
rdev->clock.default_sclk =
radeon_legacy_get_engine_clock(rdev);
-
+
val = of_get_property(dp, "ATY,MCLK", NULL);
if (val && *val)
rdev->clock.default_mclk = (*val) / 10;
radeon_legacy_get_memory_clock(rdev);
DRM_INFO("Using device-tree clock info\n");
-
+
return true;
}
#else
rdev->clock.default_sclk = sclk;
rdev->clock.default_mclk = mclk;
+ if (RBIOS32(pll_info + 0x16))
+ rdev->clock.max_pixel_clock = RBIOS32(pll_info + 0x16);
+ else
+ rdev->clock.max_pixel_clock = 35000; /* might need something asic specific */
+
return true;
}
return false;
(rdev->pdev->subsystem_device == 0x4a48)) {
/* Mac X800 */
rdev->mode_info.connector_table = CT_MAC_X800;
- } else if ((rdev->pdev->device == 0x4150) &&
- (rdev->pdev->subsystem_vendor == 0x1002) &&
- (rdev->pdev->subsystem_device == 0x4150)) {
+ } else if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3")) {
/* Mac G5 9600 */
rdev->mode_info.connector_table = CT_MAC_G5_9600;
} else
static int radeon_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
/* XXX check mode bandwidth */
- /* XXX verify against max DAC output frequency */
+
+ if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
return MODE_OK;
}
} else
return MODE_CLOCK_HIGH;
}
+
+ /* check against the max pixel clock */
+ if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
return MODE_OK;
}
ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE,
_DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING,
&dev_priv->aperture);
- if (ret)
- return ret;
-
return ret;
}
sector_t block)
{
struct ide_cmd cmd;
- int uptodate = 0, nsectors;
+ int uptodate = 0;
+ unsigned int nsectors;
ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu",
rq->cmd[0], (unsigned long long)block);
_queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY,
sizeof(struct ph_info_dch) + dch->dev.nrbchan *
sizeof(struct ph_info_ch), phi, GFP_ATOMIC);
+ kfree(phi);
}
/*
+config LEDS_GPIO_REGISTER
+ bool
+ help
+ This option provides the function gpio_led_register_device.
+ As this function is used by arch code it must not be compiled as a
+ module.
+
menuconfig NEW_LEDS
bool "LED Support"
help
This is not related to standard keyboard LEDs which are controlled
via the input system.
+if NEW_LEDS
+
config LEDS_CLASS
bool "LED Class Support"
- depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-config LEDS_GPIO_REGISTER
- bool
- help
- This option provides the function gpio_led_register_device.
- As this function is used by arch code it must not be compiled as a
- module.
-
-if NEW_LEDS
-
comment "LED drivers"
config LEDS_88PM860X
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
+ depends on LEDS_CLASS
depends on MFD_ASIC3
default y
help
kunmap_atomic(sb, KM_USER0);
}
+/*
+ * bitmap_new_disk_sb
+ * @bitmap
+ *
+ * This function is somewhat the reverse of bitmap_read_sb. bitmap_read_sb
+ * reads and verifies the on-disk bitmap superblock and populates bitmap_info.
+ * This function verifies 'bitmap_info' and populates the on-disk bitmap
+ * structure, which is to be written to disk.
+ *
+ * Returns: 0 on success, -Exxx on error
+ */
+static int bitmap_new_disk_sb(struct bitmap *bitmap)
+{
+ bitmap_super_t *sb;
+ unsigned long chunksize, daemon_sleep, write_behind;
+ int err = -EINVAL;
+
+ bitmap->sb_page = alloc_page(GFP_KERNEL);
+ if (IS_ERR(bitmap->sb_page)) {
+ err = PTR_ERR(bitmap->sb_page);
+ bitmap->sb_page = NULL;
+ return err;
+ }
+ bitmap->sb_page->index = 0;
+
+ sb = kmap_atomic(bitmap->sb_page, KM_USER0);
+
+ sb->magic = cpu_to_le32(BITMAP_MAGIC);
+ sb->version = cpu_to_le32(BITMAP_MAJOR_HI);
+
+ chunksize = bitmap->mddev->bitmap_info.chunksize;
+ BUG_ON(!chunksize);
+ if (!is_power_of_2(chunksize)) {
+ kunmap_atomic(sb, KM_USER0);
+ printk(KERN_ERR "bitmap chunksize not a power of 2\n");
+ return -EINVAL;
+ }
+ sb->chunksize = cpu_to_le32(chunksize);
+
+ daemon_sleep = bitmap->mddev->bitmap_info.daemon_sleep;
+ if (!daemon_sleep ||
+ (daemon_sleep < 1) || (daemon_sleep > MAX_SCHEDULE_TIMEOUT)) {
+ printk(KERN_INFO "Choosing daemon_sleep default (5 sec)\n");
+ daemon_sleep = 5 * HZ;
+ }
+ sb->daemon_sleep = cpu_to_le32(daemon_sleep);
+ bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep;
+
+ /*
+ * FIXME: write_behind for RAID1. If not specified, what
+ * is a good choice? We choose COUNTER_MAX / 2 arbitrarily.
+ */
+ write_behind = bitmap->mddev->bitmap_info.max_write_behind;
+ if (write_behind > COUNTER_MAX)
+ write_behind = COUNTER_MAX / 2;
+ sb->write_behind = cpu_to_le32(write_behind);
+ bitmap->mddev->bitmap_info.max_write_behind = write_behind;
+
+ /* keep the array size field of the bitmap superblock up to date */
+ sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);
+
+ memcpy(sb->uuid, bitmap->mddev->uuid, 16);
+
+ bitmap->flags |= BITMAP_STALE;
+ sb->state |= cpu_to_le32(BITMAP_STALE);
+ bitmap->events_cleared = bitmap->mddev->events;
+ sb->events_cleared = cpu_to_le64(bitmap->mddev->events);
+
+ bitmap->flags |= BITMAP_HOSTENDIAN;
+ sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN);
+
+ kunmap_atomic(sb, KM_USER0);
+
+ return 0;
+}
+
/* read the superblock from the bitmap file and initialize some bitmap fields */
static int bitmap_read_sb(struct bitmap *bitmap)
{
reason = "unrecognized superblock version";
else if (chunksize < 512)
reason = "bitmap chunksize too small";
- else if ((1 << ffz(~chunksize)) != chunksize)
+ else if (!is_power_of_2(chunksize))
reason = "bitmap chunksize not a power of 2";
else if (daemon_sleep < 1 || daemon_sleep > MAX_SCHEDULE_TIMEOUT)
reason = "daemon sleep period out of range";
}
printk(KERN_INFO "%s: bitmap initialized from disk: "
- "read %lu/%lu pages, set %lu bits\n",
- bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt);
+ "read %lu/%lu pages, set %lu of %lu bits\n",
+ bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt, chunks);
return 0;
return 0;
}
- if (unlikely((*bmc & COUNTER_MAX) == COUNTER_MAX)) {
+ if (unlikely(COUNTER(*bmc) == COUNTER_MAX)) {
DEFINE_WAIT(__wait);
/* note that it is safe to do the prepare_to_wait
* after the test as long as we do it before dropping
sysfs_notify_dirent_safe(bitmap->sysfs_can_clear);
}
- if (!success && ! (*bmc & NEEDED_MASK))
+ if (!success && !NEEDED(*bmc))
*bmc |= NEEDED_MASK;
- if ((*bmc & COUNTER_MAX) == COUNTER_MAX)
+ if (COUNTER(*bmc) == COUNTER_MAX)
wake_up(&bitmap->overflow_wait);
(*bmc)--;
vfs_fsync(file, 1);
}
/* read superblock from bitmap file (this sets mddev->bitmap_info.chunksize) */
- if (!mddev->bitmap_info.external)
- err = bitmap_read_sb(bitmap);
- else {
+ if (!mddev->bitmap_info.external) {
+ /*
+ * If 'MD_ARRAY_FIRST_USE' is set, then device-mapper is
+ * instructing us to create a new on-disk bitmap instance.
+ */
+ if (test_and_clear_bit(MD_ARRAY_FIRST_USE, &mddev->flags))
+ err = bitmap_new_disk_sb(bitmap);
+ else
+ err = bitmap_read_sb(bitmap);
+ } else {
err = 0;
if (mddev->bitmap_info.chunksize == 0 ||
mddev->bitmap_info.daemon_sleep == 0)
bitmap->chunks = chunks;
bitmap->pages = pages;
bitmap->missing_pages = pages;
- bitmap->counter_bits = COUNTER_BITS;
-
- bitmap->syncchunk = ~0UL;
#ifdef INJECT_FATAL_FAULT_1
bitmap->bp = NULL;
typedef __u16 bitmap_counter_t;
#define COUNTER_BITS 16
#define COUNTER_BIT_SHIFT 4
-#define COUNTER_BYTE_RATIO (COUNTER_BITS / 8)
#define COUNTER_BYTE_SHIFT (COUNTER_BIT_SHIFT - 3)
#define NEEDED_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 1)))
mddev_t *mddev; /* the md device that the bitmap is for */
- int counter_bits; /* how many bits per block counter */
-
/* bitmap chunksize -- how much data does each bit represent? */
unsigned long chunkshift; /* chunksize = 2^chunkshift (for bitops) */
unsigned long chunks; /* total number of data chunks for the array */
- /* We hold a count on the chunk currently being synced, and drop
- * it when the last block is started. If the resync is aborted
- * midway, we need to be able to drop that count, so we remember
- * the counted chunk..
- */
- unsigned long syncchunk;
-
__u64 events_cleared;
int need_sync;
mddev->suspended = 0;
wake_up(&mddev->sb_wait);
mddev->pers->quiesce(mddev, 0);
+
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
}
EXPORT_SYMBOL_GPL(mddev_resume);
},
};
+static void sync_super(mddev_t *mddev, mdk_rdev_t *rdev)
+{
+ if (mddev->sync_super) {
+ mddev->sync_super(mddev, rdev);
+ return;
+ }
+
+ BUG_ON(mddev->major_version >= ARRAY_SIZE(super_types));
+
+ super_types[mddev->major_version].sync_super(mddev, rdev);
+}
+
static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2)
{
mdk_rdev_t *rdev, *rdev2;
if (list_empty(&mddev->disks))
return 0; /* nothing to do */
- if (blk_get_integrity(mddev->gendisk))
- return 0; /* already registered */
+ if (!mddev->gendisk || blk_get_integrity(mddev->gendisk))
+ return 0; /* shouldn't register, or already is */
list_for_each_entry(rdev, &mddev->disks, same_set) {
/* skip spares and non-functional disks */
if (test_bit(Faulty, &rdev->flags))
/* Don't update this superblock */
rdev->sb_loaded = 2;
} else {
- super_types[mddev->major_version].
- sync_super(mddev, rdev);
+ sync_super(mddev, rdev);
rdev->sb_loaded = 1;
}
}
if (rdev->raid_disk == -1)
return -EEXIST;
/* personality does all needed checks */
- if (rdev->mddev->pers->hot_add_disk == NULL)
+ if (rdev->mddev->pers->hot_remove_disk == NULL)
return -EINVAL;
err = rdev->mddev->pers->
hot_remove_disk(rdev->mddev, rdev->raid_disk);
if (mddev->flags)
md_update_sb(mddev, 0);
- md_wakeup_thread(mddev->thread);
- md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
-
md_new_event(mddev);
sysfs_notify_dirent_safe(mddev->sysfs_state);
sysfs_notify_dirent_safe(mddev->sysfs_action);
bitmap_destroy(mddev);
goto out;
}
+
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
+
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
mddev->changed = 1;
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ if (!err)
+ md_new_event(mddev);
md_wakeup_thread(mddev->thread);
return err;
}
* Tune reconstruction:
*/
window = 32*(PAGE_SIZE/512);
- printk(KERN_INFO "md: using %dk window, over a total of %llu blocks.\n",
- window/2,(unsigned long long) max_sectors/2);
+ printk(KERN_INFO "md: using %dk window, over a total of %lluk.\n",
+ window/2, (unsigned long long)max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
last_check = 0;
}
EXPORT_SYMBOL_GPL(md_do_sync);
-
static int remove_and_add_spares(mddev_t *mddev)
{
mdk_rdev_t *rdev;
*/
void md_check_recovery(mddev_t *mddev)
{
+ if (mddev->suspended)
+ return;
+
if (mddev->bitmap)
bitmap_daemon_work(mddev);
#define MD_CHANGE_DEVS 0 /* Some device status has changed */
#define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */
#define MD_CHANGE_PENDING 2 /* switch from 'clean' to 'active' in progress */
+#define MD_ARRAY_FIRST_USE 3 /* First use of array, needs initialization */
int suspended;
atomic_t active_io;
atomic_t flush_pending;
struct work_struct flush_work;
struct work_struct event_work; /* used by dm to report failure event */
+ void (*sync_super)(mddev_t *mddev, mdk_rdev_t *rdev);
};
return best_disk;
}
-static int raid1_congested(void *data, int bits)
+int md_raid1_congested(mddev_t *mddev, int bits)
{
- mddev_t *mddev = data;
conf_t *conf = mddev->private;
int i, ret = 0;
- if (mddev_congested(mddev, bits))
- return 1;
-
rcu_read_lock();
for (i = 0; i < mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags)) {
struct request_queue *q = bdev_get_queue(rdev->bdev);
+ BUG_ON(!q);
+
/* Note the '|| 1' - when read_balance prefers
* non-congested targets, it can be removed
*/
rcu_read_unlock();
return ret;
}
+EXPORT_SYMBOL_GPL(md_raid1_congested);
+static int raid1_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+
+ return mddev_congested(mddev, bits) ||
+ md_raid1_congested(mddev, bits);
+}
static void flush_pending_writes(conf_t *conf)
{
return PTR_ERR(conf);
list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (!mddev->gendisk)
+ continue;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
md_set_array_sectors(mddev, raid1_size(mddev, 0, 0));
- mddev->queue->backing_dev_info.congested_fn = raid1_congested;
- mddev->queue->backing_dev_info.congested_data = mddev;
+ if (mddev->queue) {
+ mddev->queue->backing_dev_info.congested_fn = raid1_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
+ }
return md_integrity_register(mddev);
}
*/
#define R1BIO_Returned 6
+extern int md_raid1_congested(mddev_t *mddev, int bits);
+
#endif
static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
{
- bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16);
+ bio->bi_phys_segments = raid5_bi_phys_segments(bio) | (cnt << 16);
}
/* Find first data disk in a raid6 stripe */
bi = &sh->dev[i].req;
bi->bi_rw = rw;
- if (rw == WRITE)
+ if (rw & WRITE)
bi->bi_end_io = raid5_end_write_request;
else
bi->bi_end_io = raid5_end_read_request;
bi->bi_io_vec[0].bv_offset = 0;
bi->bi_size = STRIPE_SIZE;
bi->bi_next = NULL;
- if (rw == WRITE &&
+ if ((rw & WRITE) &&
test_bit(R5_ReWrite, &sh->dev[i].flags))
atomic_add(STRIPE_SECTORS,
&rdev->corrected_errors);
generic_make_request(bi);
} else {
- if (rw == WRITE)
+ if (rw & WRITE)
set_bit(STRIPE_DEGRADED, &sh->state);
pr_debug("skip op %ld on disc %d for sector %llu\n",
bi->bi_rw, i, (unsigned long long)sh->sector);
init_async_submit(&submit, flags, tx, NULL, NULL, NULL);
bio_for_each_segment(bvl, bio, i) {
- int len = bio_iovec_idx(bio, i)->bv_len;
+ int len = bvl->bv_len;
int clen;
int b_offset = 0;
clen = len;
if (clen > 0) {
- b_offset += bio_iovec_idx(bio, i)->bv_offset;
- bio_page = bio_iovec_idx(bio, i)->bv_page;
+ b_offset += bvl->bv_offset;
+ bio_page = bvl->bv_page;
if (frombio)
tx = async_memcpy(page, bio_page, page_offset,
b_offset, clen, &submit);
printk(KERN_INFO "md/raid:%s: device %s operational as raid"
" disk %d\n",
mdname(mddev), bdevname(rdev->bdev, b), raid_disk);
- } else
+ } else if (rdev->saved_raid_disk != raid_disk)
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
return ret;
}
+#if defined(CONFIG_PM) || defined(CONFIG_PM_RUNTIME)
static int apds990x_chip_on(struct apds990x_chip *chip)
{
int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
apds990x_mode_on(chip);
return 0;
}
+#endif
static int apds990x_chip_off(struct apds990x_chip *chip)
{
timer_nr = t < max ? (int) t : -1;
} else {
/* check if the requested timer's available */
- if (test_bit(timer_nr, mfgpt->avail))
+ if (!test_bit(timer_nr, mfgpt->avail))
timer_nr = -1;
}
err_iounmap_app:
iounmap(config->va_app_base);
err_kzalloc:
- kfree(config);
+ kfree(target);
err_rel_res:
release_mem_region(res1->start, resource_size(res1));
err_rel_res0:
else if (ret != -ENOSYS)
goto err_gpio_cd;
+ /*
+ * A gpio pin that will detect cards when inserted and removed
+ * will most likely want to trigger on the edges if it is
+ * 0 when ejected and 1 when inserted (or mutatis mutandis
+ * for the inverted case) so we request triggers on both
+ * edges.
+ */
ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
- mmci_cd_irq, 0,
- DRIVER_NAME " (cd)", host);
+ mmci_cd_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ DRIVER_NAME " (cd)", host);
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
#ifdef __arm__
static void write_rreg(u_long base, u_int reg, u_int val)
{
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"str%?h %0, [%2, #-4] @ NET_RDP"
:
static inline unsigned short read_rreg(u_long base_addr, u_int reg)
{
unsigned short v;
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"ldr%?h %0, [%2, #-4] @ NET_RDP"
: "=r" (v)
static inline void write_ireg(u_long base, u_int reg, u_int val)
{
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"str%?h %0, [%2, #8] @ NET_IDP"
:
static inline unsigned short read_ireg(u_long base_addr, u_int reg)
{
u_short v;
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NAT_RAP\n\t"
"ldr%?h %0, [%2, #8] @ NET_IDP\n\t"
: "=r" (v)
#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-static inline void
+static void
am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
{
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
- __asm__ __volatile__("str%?h %2, [%0], #4"
+ asm volatile("str%?h %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
}
while (length > 8) {
- unsigned int tmp, tmp2;
- __asm__ __volatile__(
- "ldm%?ia %1!, {%2, %3}\n\t"
+ register unsigned int tmp asm("r2"), tmp2 asm("r3");
+ asm volatile(
+ "ldm%?ia %0!, {%1, %2}"
+ : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
+ length -= 8;
+ asm volatile(
+ "str%?h %1, [%0], #4\n\t"
+ "mov%? %1, %1, lsr #16\n\t"
+ "str%?h %1, [%0], #4\n\t"
"str%?h %2, [%0], #4\n\t"
"mov%? %2, %2, lsr #16\n\t"
- "str%?h %2, [%0], #4\n\t"
- "str%?h %3, [%0], #4\n\t"
- "mov%? %3, %3, lsr #16\n\t"
- "str%?h %3, [%0], #4"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2)
- : "0" (offset), "1" (buf));
- length -= 8;
+ "str%?h %2, [%0], #4"
+ : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
}
while (length > 0) {
- __asm__ __volatile__("str%?h %2, [%0], #4"
+ asm volatile("str%?h %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
}
}
-static inline void
+static void
am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
{
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
unsigned int tmp;
- __asm__ __volatile__(
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
"str%?b %2, [%1], #1\n\t"
"mov%? %2, %2, lsr #8\n\t"
length -= 2;
}
while (length > 8) {
- unsigned int tmp, tmp2, tmp3;
- __asm__ __volatile__(
+ register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
+ "ldr%?h %4, [%0], #4\n\t"
"ldr%?h %3, [%0], #4\n\t"
- "orr%? %2, %2, %3, lsl #16\n\t"
- "ldr%?h %3, [%0], #4\n\t"
+ "orr%? %2, %2, %4, lsl #16\n\t"
"ldr%?h %4, [%0], #4\n\t"
"orr%? %3, %3, %4, lsl #16\n\t"
"stm%?ia %1!, {%2, %3}"
}
while (length > 0) {
unsigned int tmp;
- __asm__ __volatile__(
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
"str%?b %2, [%1], #1\n\t"
"mov%? %2, %2, lsr #8\n\t"
return errorcount;
}
+static void am79c961_mc_hash(char *addr, u16 *hash)
+{
+ if (addr[0] & 0x01) {
+ int idx, bit;
+ u32 crc;
+
+ crc = ether_crc_le(ETH_ALEN, addr);
+
+ idx = crc >> 30;
+ bit = (crc >> 26) & 15;
+
+ hash[idx] |= 1 << bit;
+ }
+}
+
+static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
+{
+ unsigned int mode = MODE_PORT_10BT;
+
+ if (dev->flags & IFF_PROMISC) {
+ mode |= MODE_PROMISC;
+ memset(hash, 0xff, 4 * sizeof(*hash));
+ } else if (dev->flags & IFF_ALLMULTI) {
+ memset(hash, 0xff, 4 * sizeof(*hash));
+ } else {
+ struct netdev_hw_addr *ha;
+
+ memset(hash, 0, 4 * sizeof(*hash));
+
+ netdev_for_each_mc_addr(ha, dev)
+ am79c961_mc_hash(ha->addr, hash);
+ }
+
+ return mode;
+}
+
static void
am79c961_init_for_open(struct net_device *dev)
{
unsigned long flags;
unsigned char *p;
u_int hdr_addr, first_free_addr;
+ u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
int i;
/*
write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, 0);
+ write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
- i = MODE_PORT_10BT;
- if (dev->flags & IFF_PROMISC)
- i |= MODE_PROMISC;
-
- write_rreg (dev->base_addr, MODE, i);
+ write_rreg (dev->base_addr, MODE, mode);
write_rreg (dev->base_addr, POLLINT, 0);
write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
return 0;
}
-static void am79c961_mc_hash(char *addr, unsigned short *hash)
-{
- if (addr[0] & 0x01) {
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
- }
-}
-
/*
* Set or clear promiscuous/multicast mode filter for this adapter.
*/
{
struct dev_priv *priv = netdev_priv(dev);
unsigned long flags;
- unsigned short multi_hash[4], mode;
+ u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
int i, stopped;
- mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(multi_hash, 0xff, sizeof(multi_hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(multi_hash, 0x00, sizeof(multi_hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, multi_hash);
- }
-
spin_lock_irqsave(&priv->chip_lock, flags);
stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
skb = dev_alloc_skb(length + 2);
if (likely(skb != NULL)) {
+ struct ep93xx_rdesc *rxd = &ep->descs->rdesc[entry];
skb_reserve(skb, 2);
- dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr,
+ dma_sync_single_for_cpu(dev->dev.parent, rxd->buf_addr,
length, DMA_FROM_DEVICE);
skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
+ dma_sync_single_for_device(dev->dev.parent,
+ rxd->buf_addr, length,
+ DMA_FROM_DEVICE);
skb_put(skb, length);
skb->protocol = eth_type_trans(skb, dev);
static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
+ struct ep93xx_tdesc *txd;
int entry;
if (unlikely(skb->len > MAX_PKT_SIZE)) {
entry = ep->tx_pointer;
ep->tx_pointer = (ep->tx_pointer + 1) & (TX_QUEUE_ENTRIES - 1);
- ep->descs->tdesc[entry].tdesc1 =
- TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
+ txd = &ep->descs->tdesc[entry];
+
+ txd->tdesc1 = TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
+ dma_sync_single_for_cpu(dev->dev.parent, txd->buf_addr, skb->len,
+ DMA_TO_DEVICE);
skb_copy_and_csum_dev(skb, ep->tx_buf[entry]);
- dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr,
- skb->len, DMA_TO_DEVICE);
+ dma_sync_single_for_device(dev->dev.parent, txd->buf_addr, skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb(skb);
spin_lock_irq(&ep->tx_pending_lock);
static void ep93xx_free_buffers(struct ep93xx_priv *ep)
{
+ struct device *dev = ep->dev->dev.parent;
int i;
- for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) {
+ for (i = 0; i < RX_QUEUE_ENTRIES; i++) {
dma_addr_t d;
d = ep->descs->rdesc[i].buf_addr;
if (d)
- dma_unmap_single(NULL, d, PAGE_SIZE, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_FROM_DEVICE);
if (ep->rx_buf[i] != NULL)
- free_page((unsigned long)ep->rx_buf[i]);
+ kfree(ep->rx_buf[i]);
}
- for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) {
+ for (i = 0; i < TX_QUEUE_ENTRIES; i++) {
dma_addr_t d;
d = ep->descs->tdesc[i].buf_addr;
if (d)
- dma_unmap_single(NULL, d, PAGE_SIZE, DMA_TO_DEVICE);
+ dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_TO_DEVICE);
if (ep->tx_buf[i] != NULL)
- free_page((unsigned long)ep->tx_buf[i]);
+ kfree(ep->tx_buf[i]);
}
- dma_free_coherent(NULL, sizeof(struct ep93xx_descs), ep->descs,
+ dma_free_coherent(dev, sizeof(struct ep93xx_descs), ep->descs,
ep->descs_dma_addr);
}
-/*
- * The hardware enforces a sub-2K maximum packet size, so we put
- * two buffers on every hardware page.
- */
static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
{
+ struct device *dev = ep->dev->dev.parent;
int i;
- ep->descs = dma_alloc_coherent(NULL, sizeof(struct ep93xx_descs),
- &ep->descs_dma_addr, GFP_KERNEL | GFP_DMA);
+ ep->descs = dma_alloc_coherent(dev, sizeof(struct ep93xx_descs),
+ &ep->descs_dma_addr, GFP_KERNEL);
if (ep->descs == NULL)
return 1;
- for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) {
- void *page;
+ for (i = 0; i < RX_QUEUE_ENTRIES; i++) {
+ void *buf;
dma_addr_t d;
- page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
- if (page == NULL)
+ buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL);
+ if (buf == NULL)
goto err;
- d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(NULL, d)) {
- free_page((unsigned long)page);
+ d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, d)) {
+ kfree(buf);
goto err;
}
- ep->rx_buf[i] = page;
+ ep->rx_buf[i] = buf;
ep->descs->rdesc[i].buf_addr = d;
ep->descs->rdesc[i].rdesc1 = (i << 16) | PKT_BUF_SIZE;
-
- ep->rx_buf[i + 1] = page + PKT_BUF_SIZE;
- ep->descs->rdesc[i + 1].buf_addr = d + PKT_BUF_SIZE;
- ep->descs->rdesc[i + 1].rdesc1 = ((i + 1) << 16) | PKT_BUF_SIZE;
}
- for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) {
- void *page;
+ for (i = 0; i < TX_QUEUE_ENTRIES; i++) {
+ void *buf;
dma_addr_t d;
- page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
- if (page == NULL)
+ buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL);
+ if (buf == NULL)
goto err;
- d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(NULL, d)) {
- free_page((unsigned long)page);
+ d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, d)) {
+ kfree(buf);
goto err;
}
- ep->tx_buf[i] = page;
+ ep->tx_buf[i] = buf;
ep->descs->tdesc[i].buf_addr = d;
-
- ep->tx_buf[i + 1] = page + PKT_BUF_SIZE;
- ep->descs->tdesc[i + 1].buf_addr = d + PKT_BUF_SIZE;
}
return 0;
}
ep = netdev_priv(dev);
ep->dev = dev;
+ SET_NETDEV_DEV(dev, &pdev->dev);
netif_napi_add(dev, &ep->napi, ep93xx_poll, 64);
platform_set_drvdata(pdev, dev);
return next;
}
+#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
+
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
{
skb->dev = slave_dev;
skb->priority = 1;
+
+ skb->queue_mapping = bond_queue_mapping(skb);
+
if (unlikely(netpoll_tx_running(slave_dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
else
return res;
}
+
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
{
/*
*/
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
+ /*
+ * Save the original txq to restore before passing to the driver
+ */
+ bond_queue_mapping(skb) = skb->queue_mapping;
+
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
txq -= dev->real_num_tx_queues;
if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */
/* Check CRC */
crc = ~ether_crc_le (256 - 4, sromdata);
- if (psrom->crc != crc) {
+ if (psrom->crc != cpu_to_le32(crc)) {
printk (KERN_ERR "%s: EEPROM data CRC error.\n",
dev->name);
return -1;
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
* Copyright 2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
#endif
};
-unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
-unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
-
void lock_rx_qs(struct gfar_private *priv)
{
int i = 0x0;
rqfar--;
rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
- ftp_rqfpr[rqfar] = rqfpr;
- ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_NOMATCH;
- ftp_rqfpr[rqfar] = rqfpr;
- ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND;
rqfpr = class;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND;
rqfpr = class;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
return rqfar;
/* Default rule */
rqfcr = RQFCR_CMP_MATCH;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6);
/* Rest are masked rules */
rqfcr = RQFCR_CMP_NOMATCH;
for (i = 0; i < rqfar; i++) {
- ftp_rqfcr[i] = rqfcr;
- ftp_rqfpr[i] = rqfpr;
+ priv->ftp_rqfcr[i] = rqfcr;
+ priv->ftp_rqfpr[i] = rqfpr;
gfar_write_filer(priv, i, rqfcr, rqfpr);
}
}
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/* HW time stamping enabled flag */
int hwts_rx_en;
int hwts_tx_en;
+
+ /*Filer table*/
+ unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+ unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
};
-extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
-extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
static inline int gfar_has_errata(struct gfar_private *priv,
enum gfar_errata err)
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2003-2006, 2008-2009, 2011 Freescale Semiconductor, Inc.
*
* This software may be used and distributed according to
* the terms of the GNU Public License, Version 2, incorporated herein
if (ethflow & RXH_L2DA) {
fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_IP_SRC) {
fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & (RXH_IP_DST)) {
fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_L3_PROTO) {
fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_L4_B_0_1) {
fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_L4_B_2_3) {
fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
}
for (i = 0; i < MAX_FILER_IDX + 1; i++) {
- local_rqfpr[j] = ftp_rqfpr[i];
- local_rqfcr[j] = ftp_rqfcr[i];
+ local_rqfpr[j] = priv->ftp_rqfpr[i];
+ local_rqfcr[j] = priv->ftp_rqfcr[i];
j--;
- if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE |
+ if ((priv->ftp_rqfcr[i] == (RQFCR_PID_PARSE |
RQFCR_CLE |RQFCR_AND)) &&
- (ftp_rqfpr[i] == cmp_rqfpr))
+ (priv->ftp_rqfpr[i] == cmp_rqfpr))
break;
}
* if it was already programmed, we need to overwrite these rules
*/
for (l = i+1; l < MAX_FILER_IDX; l++) {
- if ((ftp_rqfcr[l] & RQFCR_CLE) &&
- !(ftp_rqfcr[l] & RQFCR_AND)) {
- ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
+ if ((priv->ftp_rqfcr[l] & RQFCR_CLE) &&
+ !(priv->ftp_rqfcr[l] & RQFCR_AND)) {
+ priv->ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
RQFCR_HASHTBL_0 | RQFCR_PID_MASK;
- ftp_rqfpr[l] = FPR_FILER_MASK;
- gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]);
+ priv->ftp_rqfpr[l] = FPR_FILER_MASK;
+ gfar_write_filer(priv, l, priv->ftp_rqfcr[l],
+ priv->ftp_rqfpr[l]);
break;
}
- if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND))
+ if (!(priv->ftp_rqfcr[l] & RQFCR_CLE) &&
+ (priv->ftp_rqfcr[l] & RQFCR_AND))
continue;
else {
- local_rqfpr[j] = ftp_rqfpr[l];
- local_rqfcr[j] = ftp_rqfcr[l];
+ local_rqfpr[j] = priv->ftp_rqfpr[l];
+ local_rqfcr[j] = priv->ftp_rqfcr[l];
j--;
}
}
/* Write back the popped out rules again */
for (k = j+1; k < MAX_FILER_IDX; k++) {
- ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
- ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
+ priv->ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
+ priv->ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
gfar_write_filer(priv, priv->cur_filer_idx,
local_rqfcr[k], local_rqfpr[k]);
if (!priv->cur_filer_idx)
}
#endif /* CONFIG_PCI_IOV */
adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+ /* i350 cannot do RSS and SR-IOV at the same time */
+ if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
+ adapter->rss_queues = 1;
/*
* if rss_queues > 4 or vfs are going to be allocated with rss_queues
for (loop = 0; loop < que->no_ops; loop++) {
QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+ addr = que->read_addr;
for (i = 0; i < cnt; i++) {
QLCNIC_RD_DUMP_REG(addr, base, &data);
*buffer++ = cpu_to_le32(data);
nf = &pbuf->frag_array[0];
pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
+ pbuf->skb = NULL;
}
static inline void
{ .compatible = "smsc,lan91c94", },
{ .compatible = "smsc,lan91c111", },
{},
-}
+};
MODULE_DEVICE_TABLE(of, smc91x_match);
+#else
+#define smc91x_match NULL
#endif
static struct dev_pm_ops smc_drv_pm_ops = {
.name = CARDNAME,
.owner = THIS_MODULE,
.pm = &smc_drv_pm_ops,
-#ifdef CONFIG_OF
.of_match_table = smc91x_match,
-#endif
},
};
module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+static int modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+
/* Module info */
MODULE_AUTHOR("Jiri Slaby");
MODULE_AUTHOR("Nick Kossifidis");
struct ath5k_hw *ah = sc->ah;
struct ath_common *common = ath5k_hw_common(ah);
int ret, ani_mode;
+ bool fast;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
ath5k_drain_tx_buffs(sc);
if (chan)
sc->curchan = chan;
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+
+ fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
+
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
/* Non fatal, can happen eg.
* on mode change */
ret = 0;
- } else
+ } else {
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+ "fast chan change successful\n");
return 0;
+ }
}
/*
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_legacy_chswitch_done(priv, false);
}
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
iwl_legacy_print_rx_config_cmd(priv, ctx);
- return 0;
+ goto set_tx_power;
}
/* If we are currently associated and the new config requires
iwl4965_init_sensitivity(priv);
+set_tx_power:
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);
return rc;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
return iwl_legacy_send_cmd_pdu(priv,
REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
EXPORT_SYMBOL(iwl_legacy_chswitch_done);
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_legacy_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_legacy_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_legacy_chswitch_done(priv, false);
- }
+ iwl_legacy_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_legacy_chswitch_done(priv, false);
}
}
EXPORT_SYMBOL(iwl_legacy_rx_csa);
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
-
+#define STATUS_CHANNEL_SWITCH_PENDING 18
static inline int iwl_legacy_is_ready(struct iwl_priv *priv)
{
#endif
};
-/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
/* 1st responses from initialize and runtime uCode images.
* _4965's initialize alive response contains some calibration data. */
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_legacy_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
* at this point, staging_rxon has the
* configuration for channel switch
*/
- if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
+ if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
return 0;
}
-static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- /*
- * MULTI-FIXME
- * See iwl_mac_channel_switch.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- struct iwl_host_cmd hcmd = {
- .id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
- .flags = CMD_SYNC,
- .data = { &cmd, },
- };
-
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ch_switch->channel->hw_value;
- IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
- ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
- return iwl_send_cmd_sync(priv, &hcmd);
-}
-
static struct iwl_lib_ops iwl2000_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
- .set_channel_switch = iwl2030_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl2000_nic_config,
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
};
static struct iwl_ht_params iwl5000_ht_params = {
.ht_greenfield_support = true,
- .use_rts_for_aggregation = true, /* use rts/cts protection */
};
#define IWL_DEVICE_5000 \
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
__le16 fc, __le32 *tx_flags)
{
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
- info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
+ info->flags & IEEE80211_TX_CTL_AMPDU)
*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
- return;
- }
-
- if (priv->cfg->ht_params &&
- priv->cfg->ht_params->use_rts_for_aggregation &&
- info->flags & IEEE80211_TX_CTL_AMPDU) {
- *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
- return;
- }
}
/* Calc max signal level (dBm) among 3 possible receivers */
return 0;
}
+ /*
+ * force CTS-to-self frames protection if RTS-CTS is not preferred
+ * one aggregation protection method
+ */
+ if (!(priv->cfg->ht_params &&
+ priv->cfg->ht_params->use_rts_for_aggregation))
+ ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_chswitch_done(priv, false);
}
}
memcpy(active, &ctx->staging, sizeof(*active));
+ /*
+ * We do not commit tx power settings while channel changing,
+ * do it now if after settings changed.
+ */
+ iwl_set_tx_power(priv, priv->tx_power_next, false);
return 0;
}
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
* at this point, staging_rxon has the
* configuration for channel switch
*/
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
#ifdef CONFIG_IWLWIFI_DEBUG
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
static inline int iwl_is_ready(struct iwl_priv *priv)
#endif
};
-/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
struct {
u32 error_event_table;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, false);
- }
+ iwl_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_chswitch_done(priv, false);
}
}
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
- if (ret)
+ if (ret || !cause)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
if (ret)
goto release;
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
else
card->rx_unit = 0;
+ /*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
/*
* Enable interrupts now that everything is set up
*/
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2x00link_reset_tuner(rt2x00dev, false);
- if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
(ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
(conf->flags & IEEE80211_CONF_PS)) {
beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, autowakeup_work.work);
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
ERROR(rt2x00dev, "Device failed to wakeup.\n");
clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
* Stop all work.
*/
cancel_work_sync(&rt2x00dev->intf_work);
+ cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
if (rt2x00_is_usb(rt2x00dev)) {
del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
&rx_status,
(u8 *) pdesc, skb);
+ new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
+ if (unlikely(!new_skb)) {
+ RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
+ DBG_DMESG,
+ ("can't alloc skb for rx\n"));
+ goto done;
+ }
+
+ pci_unmap_single(rtlpci->pdev,
+ *((dma_addr_t *) skb->cb),
+ rtlpci->rxbuffersize,
+ PCI_DMA_FROMDEVICE);
+
skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
false,
HW_DESC_RXPKT_LEN));
hdr = rtl_get_hdr(skb);
fc = rtl_get_fc(skb);
- /* try for new buffer - if allocation fails, drop
- * frame and reuse old buffer
- */
- new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
- if (unlikely(!new_skb)) {
- RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
- DBG_DMESG,
- ("can't alloc skb for rx\n"));
- goto done;
- }
- pci_unmap_single(rtlpci->pdev,
- *((dma_addr_t *) skb->cb),
- rtlpci->rxbuffersize,
- PCI_DMA_FROMDEVICE);
-
- if (!stats.crc || !stats.hwerror) {
+ if (!stats.crc && !stats.hwerror) {
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status,
sizeof(rx_status));
.notifier_call = module_load_notify,
};
+static void free_all_tasks(void)
+{
+ /* make sure we don't leak task structs */
+ process_task_mortuary();
+ process_task_mortuary();
+}
+
int sync_start(void)
{
int err;
if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
return -ENOMEM;
- mutex_lock(&buffer_mutex);
-
err = task_handoff_register(&task_free_nb);
if (err)
goto out1;
start_cpu_work();
out:
- mutex_unlock(&buffer_mutex);
return err;
out4:
profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
out2:
task_handoff_unregister(&task_free_nb);
+ free_all_tasks();
out1:
free_cpumask_var(marked_cpus);
goto out;
void sync_stop(void)
{
- /* flush buffers */
- mutex_lock(&buffer_mutex);
end_cpu_work();
unregister_module_notifier(&module_load_nb);
profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
task_handoff_unregister(&task_free_nb);
- mutex_unlock(&buffer_mutex);
- flush_cpu_work();
+ barrier(); /* do all of the above first */
- /* make sure we don't leak task structs */
- process_task_mortuary();
- process_task_mortuary();
+ flush_cpu_work();
+ free_all_tasks();
free_cpumask_var(marked_cpus);
}
}
static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
if (arch_set_vga_state)
return arch_set_vga_state(dev, decode, command_bits,
- change_bridge);
+ flags);
return 0;
}
caps.n_ext_ts = ptp->info->n_ext_ts;
caps.n_per_out = ptp->info->n_per_out;
caps.pps = ptp->info->pps;
- err = copy_to_user((void __user *)arg, &caps, sizeof(caps));
+ if (copy_to_user((void __user *)arg, &caps, sizeof(caps)))
+ err = -EFAULT;
break;
case PTP_EXTTS_REQUEST:
return -ERESTARTSYS;
}
- if (ptp->defunct)
+ if (ptp->defunct) {
+ mutex_unlock(&ptp->tsevq_mux);
return -ENODEV;
+ }
spin_lock_irqsave(&queue->lock, flags);
mutex_unlock(&ptp->tsevq_mux);
- if (copy_to_user(buf, event, cnt)) {
- mutex_unlock(&ptp->tsevq_mux);
+ if (copy_to_user(buf, event, cnt))
return -EFAULT;
- }
return cnt;
}
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
-int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
struct rtc_time tm;
long now, scheduled;
err = ops->ioctl(rtc->dev.parent, cmd, arg);
if (err == -ENOIOCTLCMD)
err = -ENOTTY;
- }
+ } else
+ err = -ENOTTY;
break;
}
struct clk *clkp;
list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->ops)) {
+ if (likely(clkp->usecount && clkp->ops)) {
unsigned long rate = clkp->rate;
if (likely(clkp->ops->set_parent))
}
if ((clk_freq.cpsdvsr < CPSDVR_MIN)
|| (clk_freq.cpsdvsr > CPSDVR_MAX)) {
+ status = -EINVAL;
dev_err(&spi->dev,
"cpsdvsr is configured incorrectly\n");
goto err_config_params;
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
- /* Additional always once-executed workarounds */
- ssb_pcicore_serdes_workaround(pc);
- /* TODO: ASPM */
- /* TODO: Clock Request Update */
+ /* Additional PCIe always once-executed workarounds */
+ if (dev->id.coreid == SSB_DEV_PCIE) {
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
+ }
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
int adis16201_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16201_scan {
ADIS16201_SCAN_SUPPLY,
ADIS16201_SCAN_ACC_X,
ADIS16201_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16201_remove_trigger(struct iio_dev *indio_dev);
int adis16201_probe_trigger(struct iio_dev *indio_dev);
int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16203_scan {
ADIS16203_SCAN_SUPPLY,
ADIS16203_SCAN_AUX_ADC,
ADIS16203_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16203_remove_trigger(struct iio_dev *indio_dev);
int adis16203_probe_trigger(struct iio_dev *indio_dev);
int fifosize, base_baud;
int port_type;
struct pch_uart_driver_data *board;
+ const char *board_name;
board = &drv_dat[id->driver_data];
port_type = board->port_type;
base_baud = 1843200; /* 1.8432MHz */
/* quirk for CM-iTC board */
- if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_name && strstr(board_name, "CM-iTC"))
base_baud = 192000000; /* 192.0MHz */
switch (port_type) {
static int aty_init(struct fb_info *info);
-#ifdef CONFIG_ATARI
-static int store_video_par(char *videopar, unsigned char m64_num);
-#endif
-
static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
return;
}
+#ifdef CONFIG_PCI
static void aty_bl_exit(struct backlight_device *bd)
{
backlight_device_unregister(bd);
printk("aty: Backlight unloaded\n");
}
+#endif /* CONFIG_PCI */
#endif /* CONFIG_FB_ATY_BACKLIGHT */
return ret;
}
-#ifdef CONFIG_ATARI
+#if defined(CONFIG_ATARI) && !defined(MODULE)
static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
char *p;
phys_vmembase[m64_num] = 0;
return -1;
}
-#endif /* CONFIG_ATARI */
+#endif /* CONFIG_ATARI && !MODULE */
/*
* Blank the display.
To compile this driver as a module, choose M here: the module will
be called adp8860_bl.
+config BACKLIGHT_ADP8870
+ tristate "Backlight Driver for ADP8870 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ If you have a LCD backlight connected to the ADP8870,
+ say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp8870_bl.
+
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
depends on MFD_88PM860X
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
--- /dev/null
+/*
+ * Backlight driver for Analog Devices ADP8870 Backlight Devices
+ *
+ * Copyright 2009-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#include <linux/i2c/adp8870.h>
+#define ADP8870_EXT_FEATURES
+#define ADP8870_USE_LEDS
+
+
+#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */
+#define ADP8870_MDCR 0x01 /* Device mode and status */
+#define ADP8870_INT_STAT 0x02 /* Interrupts status */
+#define ADP8870_INT_EN 0x03 /* Interrupts enable */
+#define ADP8870_CFGR 0x04 /* Configuration register */
+#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */
+#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */
+#define ADP8870_BLOFF 0x07 /* Backlight off timeout */
+#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */
+#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */
+#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */
+#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */
+#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */
+#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */
+#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */
+#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */
+#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */
+#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */
+#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */
+#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */
+#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */
+#define ADP8870_ISCC 0x1B /* Independent sink current control register */
+#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */
+#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */
+#define ADP8870_ISCF 0x1E /* Independent sink current fade register */
+#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */
+#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */
+#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */
+#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */
+#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */
+#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */
+#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */
+#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */
+#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */
+#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */
+#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */
+#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */
+#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */
+#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */
+#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */
+#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */
+#define ADP8870_L2TRP 0x32 /* L2 comparator reference */
+#define ADP8870_L2HYS 0x33 /* L2 hysteresis */
+#define ADP8870_L3TRP 0x34 /* L3 comparator reference */
+#define ADP8870_L3HYS 0x35 /* L3 hysteresis */
+#define ADP8870_L4TRP 0x36 /* L4 comparator reference */
+#define ADP8870_L4HYS 0x37 /* L4 hysteresis */
+#define ADP8870_L5TRP 0x38 /* L5 comparator reference */
+#define ADP8870_L5HYS 0x39 /* L5 hysteresis */
+#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */
+#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */
+#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */
+#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */
+
+#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */
+#define ADP8870_DEVID(x) ((x) & 0xF)
+#define ADP8870_MANID(x) ((x) >> 4)
+
+/* MDCR Device mode and status */
+#define D7ALSEN (1 << 7)
+#define INT_CFG (1 << 6)
+#define NSTBY (1 << 5)
+#define DIM_EN (1 << 4)
+#define GDWN_DIS (1 << 3)
+#define SIS_EN (1 << 2)
+#define CMP_AUTOEN (1 << 1)
+#define BLEN (1 << 0)
+
+/* ADP8870_ALS1_EN Main ALS comparator level enable */
+#define L5_EN (1 << 3)
+#define L4_EN (1 << 2)
+#define L3_EN (1 << 1)
+#define L2_EN (1 << 0)
+
+#define CFGR_BLV_SHIFT 3
+#define CFGR_BLV_MASK 0x7
+#define ADP8870_FLAG_LED_MASK 0xFF
+
+#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
+#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1)
+
+struct adp8870_bl {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct adp8870_led *led;
+ struct adp8870_backlight_platform_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int revid;
+ int current_brightness;
+};
+
+struct adp8870_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct i2c_client *client;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+
+static int adp8870_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret)
+ dev_err(&client->dev, "failed to write\n");
+
+ return ret;
+}
+
+static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && ((reg_val & bit_mask) == 0)) {
+ reg_val |= bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && (reg_val & bit_mask)) {
+ reg_val &= ~bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/*
+ * Independent sink / LED
+ */
+#if defined(ADP8870_USE_LEDS)
+static void adp8870_led_work(struct work_struct *work)
+{
+ struct adp8870_led *led = container_of(work, struct adp8870_led, work);
+ adp8870_write(led->client, ADP8870_ISC1 + led->id - 1,
+ led->new_brightness >> 1);
+}
+
+static void adp8870_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp8870_led *led;
+
+ led = container_of(led_cdev, struct adp8870_led, cdev);
+ led->new_brightness = value;
+ /*
+ * Use workqueue for IO since I2C operations can sleep.
+ */
+ schedule_work(&led->work);
+}
+
+static int adp8870_led_setup(struct adp8870_led *led)
+{
+ struct i2c_client *client = led->client;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1));
+ if (ret)
+ return ret;
+
+ if (led->id > 4)
+ ret = adp8870_set_bits(client, ADP8870_ISCT1,
+ (led->flags & 0x3) << ((led->id - 5) * 2));
+ else
+ ret = adp8870_set_bits(client, ADP8870_ISCT2,
+ (led->flags & 0x3) << ((led->id - 1) * 2));
+
+ return ret;
+}
+
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ struct adp8870_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+
+ led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCT1,
+ (pdata->led_on_time & 0x3) << 6);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCF,
+ FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
+ if (ret)
+ goto err_free;
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK;
+
+ if (led_dat->id > 7 || led_dat->id < 1) {
+ dev_err(&client->dev, "Invalid LED ID %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
+ dev_err(&client->dev, "LED %d used by Backlight\n",
+ led_dat->id);
+ goto err;
+ }
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp8870_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
+ led_dat->client = client;
+ led_dat->new_brightness = LED_OFF;
+ INIT_WORK(&led_dat->work, adp8870_led_work);
+
+ ret = led_classdev_register(&client->dev, &led_dat->cdev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp8870_led_setup(led_dat);
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ data->led = led;
+
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; --i) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&data->led[i].cdev);
+ cancel_work_sync(&data->led[i].work);
+ }
+
+ kfree(data->led);
+ return 0;
+}
+#else
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ return 0;
+}
+#endif
+
+static int adp8870_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ int ret = 0;
+
+ if (data->pdata->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret = adp8870_clr_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l1 sysfs brightness
+ */
+ ret = adp8870_write(client, ADP8870_BLMX1,
+ data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ }
+
+ if (data->current_brightness && brightness == 0)
+ ret = adp8870_set_bits(client,
+ ADP8870_MDCR, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret = adp8870_clr_bits(client,
+ ADP8870_MDCR, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp8870_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp8870_bl_set(bl, brightness);
+}
+
+static int adp8870_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+
+ return data->current_brightness;
+}
+
+static const struct backlight_ops adp8870_bl_ops = {
+ .update_status = adp8870_bl_update_status,
+ .get_brightness = adp8870_bl_get_brightness,
+};
+
+static int adp8870_bl_setup(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ struct adp8870_backlight_platform_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim);
+ if (ret)
+ return ret;
+
+ if (pdata->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret = adp8870_write(client, ADP8870_BLMX2,
+ pdata->l2_bright_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM2,
+ pdata->l2_bright_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX3,
+ pdata->l3_office_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM3,
+ pdata->l3_office_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX4,
+ pdata->l4_indoor_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM4,
+ pdata->l4_indor_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX5,
+ pdata->l5_dark_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM5,
+ pdata->l5_dark_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN |
+ L3_EN | L2_EN);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_CMP_CTL,
+ ALS_CMPR_CFG_VAL(pdata->abml_filt));
+ if (ret)
+ return ret;
+ }
+
+ ret = adp8870_write(client, ADP8870_CFGR,
+ BL_CFGR_VAL(pdata->bl_fade_law, 0));
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in,
+ pdata->bl_fade_out));
+ if (ret)
+ return ret;
+ /*
+ * ADP8870 Rev0 requires GDWN_DIS bit set
+ */
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY |
+ (data->revid == 0 ? GDWN_DIS : 0));
+
+ return ret;
+}
+
+static ssize_t adp8870_show(struct device *dev, char *buf, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, reg, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp8870_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp8870_write(data->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX5);
+}
+
+static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX5);
+}
+static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show,
+ adp8870_bl_l5_dark_max_store);
+
+
+static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX4);
+}
+static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show,
+ adp8870_bl_l4_indoor_max_store);
+
+
+static ssize_t adp8870_bl_l3_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX3);
+}
+
+static ssize_t adp8870_bl_l3_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX3);
+}
+
+static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show,
+ adp8870_bl_l3_office_max_store);
+
+static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX2);
+}
+
+static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX2);
+}
+static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show,
+ adp8870_bl_l2_bright_max_store);
+
+static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ return adp8870_store(dev, buf, count, ADP8870_BLMX1);
+}
+static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show,
+ adp8870_bl_l1_daylight_max_store);
+
+static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM5);
+}
+
+static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM5);
+}
+static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show,
+ adp8870_bl_l5_dark_dim_store);
+
+static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM4);
+}
+static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show,
+ adp8870_bl_l4_indoor_dim_store);
+
+
+static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM3);
+}
+
+static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM3);
+}
+static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show,
+ adp8870_bl_l3_office_dim_store);
+
+static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM2);
+}
+
+static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM2);
+}
+static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show,
+ adp8870_bl_l2_bright_dim_store);
+
+static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM1);
+}
+static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show,
+ adp8870_bl_l1_daylight_dim_store);
+
+#ifdef ADP8870_EXT_FEATURES
+static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+ uint16_t ret_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val);
+ if (error < 0) {
+ mutex_unlock(&data->lock);
+ return error;
+ }
+ ret_val = reg_val;
+ error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ /* Return 13-bit conversion value for the first light sensor */
+ ret_val += (reg_val & 0x1F) << 8;
+
+ return sprintf(buf, "%u\n", ret_val);
+}
+static DEVICE_ATTR(ambient_light_level, 0444,
+ adp8870_bl_ambient_light_level_show, NULL);
+
+static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n",
+ ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
+}
+
+static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ uint8_t reg_val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0) {
+ /* Enable automatic ambient light sensing */
+ adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+ } else if ((val > 0) && (val < 6)) {
+ /* Disable automatic ambient light sensing */
+ adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+
+ /* Set user supplied ambient light zone */
+ mutex_lock(&data->lock);
+ adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
+ reg_val |= (val - 1) << CFGR_BLV_SHIFT;
+ adp8870_write(data->client, ADP8870_CFGR, reg_val);
+ mutex_unlock(&data->lock);
+ }
+
+ return count;
+}
+static DEVICE_ATTR(ambient_light_zone, 0664,
+ adp8870_bl_ambient_light_zone_show,
+ adp8870_bl_ambient_light_zone_store);
+#endif
+
+static struct attribute *adp8870_bl_attributes[] = {
+ &dev_attr_l5_dark_max.attr,
+ &dev_attr_l5_dark_dim.attr,
+ &dev_attr_l4_indoor_max.attr,
+ &dev_attr_l4_indoor_dim.attr,
+ &dev_attr_l3_office_max.attr,
+ &dev_attr_l3_office_dim.attr,
+ &dev_attr_l2_bright_max.attr,
+ &dev_attr_l2_bright_dim.attr,
+ &dev_attr_l1_daylight_max.attr,
+ &dev_attr_l1_daylight_dim.attr,
+#ifdef ADP8870_EXT_FEATURES
+ &dev_attr_ambient_light_level.attr,
+ &dev_attr_ambient_light_zone.attr,
+#endif
+ NULL
+};
+
+static const struct attribute_group adp8870_bl_attr_group = {
+ .attrs = adp8870_bl_attributes,
+};
+
+static int __devinit adp8870_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct backlight_properties props;
+ struct backlight_device *bl;
+ struct adp8870_bl *data;
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ uint8_t reg_val;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ ret = adp8870_read(client, ADP8870_MFDVID, ®_val);
+ if (ret < 0)
+ return -EIO;
+
+ if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) {
+ dev_err(&client->dev, "failed to probe\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->revid = ADP8870_DEVID(reg_val);
+ data->client = client;
+ data->pdata = pdata;
+ data->id = id->driver_data;
+ data->current_brightness = 0;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ memset(&props, 0, sizeof(props));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS;
+ bl = backlight_device_register(dev_driver_string(&client->dev),
+ &client->dev, data, &adp8870_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto out2;
+ }
+
+ data->bl = bl;
+
+ if (pdata->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ if (ret) {
+ dev_err(&client->dev, "failed to register sysfs\n");
+ goto out1;
+ }
+
+ ret = adp8870_bl_setup(bl);
+ if (ret) {
+ ret = -EIO;
+ goto out;
+ }
+
+ backlight_update_status(bl);
+
+ dev_info(&client->dev, "Rev.%d Backlight\n", data->revid);
+
+ if (pdata->num_leds)
+ adp8870_led_probe(client);
+
+ return 0;
+
+out:
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+out1:
+ backlight_device_unregister(bl);
+out2:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit adp8870_remove(struct i2c_client *client)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ if (data->led)
+ adp8870_led_remove(client);
+
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ backlight_device_unregister(data->bl);
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+
+static int adp8870_i2c_resume(struct i2c_client *client)
+{
+ adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+#else
+#define adp8870_i2c_suspend NULL
+#define adp8870_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id adp8870_id[] = {
+ { "adp8870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp8870_id);
+
+static struct i2c_driver adp8870_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp8870_probe,
+ .remove = __devexit_p(adp8870_remove),
+ .suspend = adp8870_i2c_suspend,
+ .resume = adp8870_i2c_resume,
+ .id_table = adp8870_id,
+};
+
+static int __init adp8870_init(void)
+{
+ return i2c_add_driver(&adp8870_driver);
+}
+module_init(adp8870_init);
+
+static void __exit adp8870_exit(void)
+{
+ i2c_del_driver(&adp8870_driver);
+}
+module_exit(adp8870_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP8870 Backlight driver");
+MODULE_ALIAS("platform:adp8870-backlight");
*/
ret = platform_driver_probe(&efifb_driver, efifb_probe);
if (ret) {
- platform_device_unregister(&efifb_driver);
+ platform_device_unregister(&efifb_device);
return ret;
}
struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
- struct s3c_fb_pd_win *windata = win->windata;
struct s3c_fb *sfb = win->parent;
dev_dbg(sfb->dev, "checking parameters\n");
- var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres);
- var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres);
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) {
dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
vidosd_set_alpha(win, alpha);
vidosd_set_size(win, data);
+ /* Enable DMA channel for this window */
+ if (sfb->variant.has_shadowcon) {
+ data = readl(sfb->regs + SHADOWCON);
+ data |= SHADOWCON_CHx_ENABLE(win_no);
+ writel(data, sfb->regs + SHADOWCON);
+ }
+
data = WINCONx_ENWIN;
/* note, since we have to round up the bits-per-pixel, we end up
writel(data, regs + sfb->variant.wincon + (win_no * 4));
writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
- /* Enable DMA channel for this window */
- if (sfb->variant.has_shadowcon) {
- data = readl(sfb->regs + SHADOWCON);
- data |= SHADOWCON_CHx_ENABLE(win_no);
- writel(data, sfb->regs + SHADOWCON);
- }
-
shadow_protect_win(win, 0);
return 0;
release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
- kfree(sfb);
-
pm_runtime_put_sync(sfb->dev);
pm_runtime_disable(sfb->dev);
+ kfree(sfb);
return 0;
}
struct fb_info *info = hdmi->info;
unsigned long parent_rate = 0, hdmi_rate;
- /* A device has been plugged in */
- pm_runtime_get_sync(hdmi->dev);
-
ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate);
- if (ret < 0) {
- pm_runtime_put(hdmi->dev);
+ if (ret < 0)
goto out;
- }
hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
/* Reconfigure the clock */
ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate);
- if (ret < 0) {
- pm_runtime_put(hdmi->dev);
+ if (ret < 0)
goto out;
- }
msleep(10);
sh_hdmi_configure(hdmi);
fb_set_suspend(hdmi->info, 1);
console_unlock();
- pm_runtime_put(hdmi->dev);
}
out:
INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
/* Product and revision IDs are 0 in sh-mobile version */
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
ecodec:
free_irq(irq, hdmi);
ereqirq:
- pm_runtime_suspend(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
iounmap(hdmi->base);
emap:
free_irq(irq, hdmi);
/* Wait for already scheduled work */
cancel_delayed_work_sync(&hdmi->edid_work);
- pm_runtime_suspend(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable(hdmi->hdmi_clk);
clk_put(hdmi->hdmi_clk);
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1
+ depends on W1 && GENERIC_HARDIRQS
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
u32 nr;
u32 blocksize;
u32 nscan = 0;
+ bool map = true;
if (level != 1)
return;
nritems = btrfs_header_nritems(node);
nr = slot;
+ if (node->map_token || path->skip_locking)
+ map = false;
+
while (1) {
- if (!node->map_token) {
+ if (map && !node->map_token) {
unsigned long offset = btrfs_node_key_ptr_offset(nr);
map_private_extent_buffer(node, offset,
sizeof(struct btrfs_key_ptr),
if ((search <= target && target - search <= 65536) ||
(search > target && search - target <= 65536)) {
gen = btrfs_node_ptr_generation(node, nr);
- if (node->map_token) {
+ if (map && node->map_token) {
unmap_extent_buffer(node, node->map_token,
KM_USER1);
node->map_token = NULL;
if ((nread > 65536 || nscan > 32))
break;
}
- if (node->map_token) {
+ if (map && node->map_token) {
unmap_extent_buffer(node, node->map_token, KM_USER1);
node->map_token = NULL;
}
init_waitqueue_head(&fs_info->scrub_pause_wait);
init_rwsem(&fs_info->scrub_super_lock);
fs_info->scrub_workers_refcnt = 0;
- btrfs_init_workers(&fs_info->scrub_workers, "scrub",
- fs_info->thread_pool_size, &fs_info->generic_worker);
sb->s_blocksize = 4096;
sb->s_blocksize_bits = blksize_bits(4096);
INIT_LIST_HEAD(&splice);
- list_splice_init(&root->fs_info->delalloc_inodes, &splice);
-
spin_lock(&root->fs_info->delalloc_lock);
+ list_splice_init(&root->fs_info->delalloc_inodes, &splice);
while (!list_empty(&splice)) {
btrfs_inode = list_entry(splice.next, struct btrfs_inode,
}
goto again;
}
+
+ /*
+ * If we have less pinned bytes than we want to allocate then
+ * don't bother committing the transaction, it won't help us.
+ */
+ if (data_sinfo->bytes_pinned < bytes)
+ committed = 1;
spin_unlock(&data_sinfo->lock);
/* commit the current transaction and try again */
* LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
* again
*/
- if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
- (found_uncached_bg || empty_size || empty_cluster ||
- allowed_chunk_alloc)) {
+ if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE) {
index = 0;
if (loop == LOOP_FIND_IDEAL && found_uncached_bg) {
found_uncached_bg = false;
goto search;
}
- if (loop < LOOP_CACHING_WAIT) {
- loop++;
- goto search;
- }
+ loop++;
if (loop == LOOP_ALLOC_CHUNK) {
- empty_size = 0;
- empty_cluster = 0;
- }
+ if (allowed_chunk_alloc) {
+ ret = do_chunk_alloc(trans, root, num_bytes +
+ 2 * 1024 * 1024, data,
+ CHUNK_ALLOC_LIMITED);
+ allowed_chunk_alloc = 0;
+ if (ret == 1)
+ done_chunk_alloc = 1;
+ } else if (!done_chunk_alloc &&
+ space_info->force_alloc ==
+ CHUNK_ALLOC_NO_FORCE) {
+ space_info->force_alloc = CHUNK_ALLOC_LIMITED;
+ }
- if (allowed_chunk_alloc) {
- ret = do_chunk_alloc(trans, root, num_bytes +
- 2 * 1024 * 1024, data,
- CHUNK_ALLOC_LIMITED);
- allowed_chunk_alloc = 0;
- done_chunk_alloc = 1;
- } else if (!done_chunk_alloc &&
- space_info->force_alloc == CHUNK_ALLOC_NO_FORCE) {
- space_info->force_alloc = CHUNK_ALLOC_LIMITED;
+ /*
+ * We didn't allocate a chunk, go ahead and drop the
+ * empty size and loop again.
+ */
+ if (!done_chunk_alloc)
+ loop = LOOP_NO_EMPTY_SIZE;
}
- if (loop < LOOP_NO_EMPTY_SIZE) {
- loop++;
- goto search;
+ if (loop == LOOP_NO_EMPTY_SIZE) {
+ empty_size = 0;
+ empty_cluster = 0;
}
- ret = -ENOSPC;
+
+ goto search;
} else if (!ins->objectid) {
ret = -ENOSPC;
} else if (ins->objectid) {
unsigned long map_len;
struct page *first_page;
unsigned long bflags;
- atomic_t refs;
struct list_head leak_list;
struct rcu_head rcu_head;
+ atomic_t refs;
/* the spinlock is used to protect most operations */
spinlock_t lock;
pgoff_t index = 0;
unsigned long first_page_offset;
int num_checksums;
- int ret = 0, ret2;
+ int ret = 0;
INIT_LIST_HEAD(&bitmaps);
goto free_cache;
}
spin_lock(&ctl->tree_lock);
- ret2 = link_free_space(ctl, e);
+ ret = link_free_space(ctl, e);
ctl->total_bitmaps++;
ctl->op->recalc_thresholds(ctl);
spin_unlock(&ctl->tree_lock);
- list_add_tail(&e->list, &bitmaps);
if (ret) {
printk(KERN_ERR "Duplicate entries in "
"free space cache, dumping\n");
page_cache_release(page);
goto free_cache;
}
+ list_add_tail(&e->list, &bitmaps);
}
num_entries--;
return 0;
}
+static u64 add_bytes_to_bitmap(struct btrfs_free_space_ctl *ctl,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ u64 bytes_to_set = 0;
+ u64 end;
+
+ end = info->offset + (u64)(BITS_PER_BITMAP * ctl->unit);
+
+ bytes_to_set = min(end - offset, bytes);
+
+ bitmap_set_bits(ctl, info, offset, bytes_to_set);
+
+ return bytes_to_set;
+
+}
+
static bool use_bitmap(struct btrfs_free_space_ctl *ctl,
struct btrfs_free_space *info)
{
return true;
}
+static struct btrfs_free_space_op free_space_op = {
+ .recalc_thresholds = recalculate_thresholds,
+ .use_bitmap = use_bitmap,
+};
+
static int insert_into_bitmap(struct btrfs_free_space_ctl *ctl,
struct btrfs_free_space *info)
{
struct btrfs_free_space *bitmap_info;
+ struct btrfs_block_group_cache *block_group = NULL;
int added = 0;
- u64 bytes, offset, end;
+ u64 bytes, offset, bytes_added;
int ret;
bytes = info->bytes;
if (!ctl->op->use_bitmap(ctl, info))
return 0;
+ if (ctl->op == &free_space_op)
+ block_group = ctl->private;
again:
+ /*
+ * Since we link bitmaps right into the cluster we need to see if we
+ * have a cluster here, and if so and it has our bitmap we need to add
+ * the free space to that bitmap.
+ */
+ if (block_group && !list_empty(&block_group->cluster_list)) {
+ struct btrfs_free_cluster *cluster;
+ struct rb_node *node;
+ struct btrfs_free_space *entry;
+
+ cluster = list_entry(block_group->cluster_list.next,
+ struct btrfs_free_cluster,
+ block_group_list);
+ spin_lock(&cluster->lock);
+ node = rb_first(&cluster->root);
+ if (!node) {
+ spin_unlock(&cluster->lock);
+ goto no_cluster_bitmap;
+ }
+
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ if (!entry->bitmap) {
+ spin_unlock(&cluster->lock);
+ goto no_cluster_bitmap;
+ }
+
+ if (entry->offset == offset_to_bitmap(ctl, offset)) {
+ bytes_added = add_bytes_to_bitmap(ctl, entry,
+ offset, bytes);
+ bytes -= bytes_added;
+ offset += bytes_added;
+ }
+ spin_unlock(&cluster->lock);
+ if (!bytes) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+no_cluster_bitmap:
bitmap_info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset),
1, 0);
if (!bitmap_info) {
goto new_bitmap;
}
- end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit);
-
- if (offset >= bitmap_info->offset && offset + bytes > end) {
- bitmap_set_bits(ctl, bitmap_info, offset, end - offset);
- bytes -= end - offset;
- offset = end;
- added = 0;
- } else if (offset >= bitmap_info->offset && offset + bytes <= end) {
- bitmap_set_bits(ctl, bitmap_info, offset, bytes);
- bytes = 0;
- } else {
- BUG();
- }
+ bytes_added = add_bytes_to_bitmap(ctl, bitmap_info, offset, bytes);
+ bytes -= bytes_added;
+ offset += bytes_added;
+ added = 0;
if (!bytes) {
ret = 1;
"\n", count);
}
-static struct btrfs_free_space_op free_space_op = {
- .recalc_thresholds = recalculate_thresholds,
- .use_bitmap = use_bitmap,
-};
-
void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
/*
* This searches the block group for just extents to fill the cluster with.
*/
-static int setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group,
- struct btrfs_free_cluster *cluster,
- u64 offset, u64 bytes, u64 min_bytes)
+static noinline int
+setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ struct list_head *bitmaps, u64 offset, u64 bytes,
+ u64 min_bytes)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *first = NULL;
* extent entry.
*/
while (entry->bitmap) {
+ if (list_empty(&entry->list))
+ list_add_tail(&entry->list, bitmaps);
node = rb_next(&entry->offset_index);
if (!node)
return -ENOSPC;
return -ENOSPC;
entry = rb_entry(node, struct btrfs_free_space, offset_index);
- if (entry->bitmap)
+ if (entry->bitmap) {
+ if (list_empty(&entry->list))
+ list_add_tail(&entry->list, bitmaps);
continue;
+ }
+
/*
* we haven't filled the empty size and the window is
* very large. reset and try again
* This specifically looks for bitmaps that may work in the cluster, we assume
* that we have already failed to find extents that will work.
*/
-static int setup_cluster_bitmap(struct btrfs_block_group_cache *block_group,
- struct btrfs_free_cluster *cluster,
- u64 offset, u64 bytes, u64 min_bytes)
+static noinline int
+setup_cluster_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ struct list_head *bitmaps, u64 offset, u64 bytes,
+ u64 min_bytes)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *entry;
if (ctl->total_bitmaps == 0)
return -ENOSPC;
+ /*
+ * First check our cached list of bitmaps and see if there is an entry
+ * here that will work.
+ */
+ list_for_each_entry(entry, bitmaps, list) {
+ if (entry->bytes < min_bytes)
+ continue;
+ ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset,
+ bytes, min_bytes);
+ if (!ret)
+ return 0;
+ }
+
+ /*
+ * If we do have entries on our list and we are here then we didn't find
+ * anything, so go ahead and get the next entry after the last entry in
+ * this list and start the search from there.
+ */
+ if (!list_empty(bitmaps)) {
+ entry = list_entry(bitmaps->prev, struct btrfs_free_space,
+ list);
+ node = rb_next(&entry->offset_index);
+ if (!node)
+ return -ENOSPC;
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ goto search;
+ }
+
entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1);
if (!entry)
return -ENOSPC;
+search:
node = &entry->offset_index;
do {
entry = rb_entry(node, struct btrfs_free_space, offset_index);
u64 offset, u64 bytes, u64 empty_size)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
+ struct list_head bitmaps;
+ struct btrfs_free_space *entry, *tmp;
u64 min_bytes;
int ret;
goto out;
}
- ret = setup_cluster_no_bitmap(block_group, cluster, offset, bytes,
- min_bytes);
+ INIT_LIST_HEAD(&bitmaps);
+ ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset,
+ bytes, min_bytes);
if (ret)
- ret = setup_cluster_bitmap(block_group, cluster, offset,
- bytes, min_bytes);
+ ret = setup_cluster_bitmap(block_group, cluster, &bitmaps,
+ offset, bytes, min_bytes);
+
+ /* Clear our temporary list */
+ list_for_each_entry_safe(entry, tmp, &bitmaps, list)
+ list_del_init(&entry->list);
if (!ret) {
atomic_inc(&block_group->count);
}
if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
- return 0;
+ goto good;
if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1, NULL)) {
btrfs_i_size_write(inode, 0);
while (1) {
- trans = btrfs_start_transaction(root, 0);
+ trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
trans->block_rsv = root->orphan_block_rsv;
static long btrfs_ioctl_fs_info(struct btrfs_root *root, void __user *arg)
{
- struct btrfs_ioctl_fs_info_args fi_args;
+ struct btrfs_ioctl_fs_info_args *fi_args;
struct btrfs_device *device;
struct btrfs_device *next;
struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
+ int ret = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- fi_args.num_devices = fs_devices->num_devices;
- fi_args.max_id = 0;
- memcpy(&fi_args.fsid, root->fs_info->fsid, sizeof(fi_args.fsid));
+ fi_args = kzalloc(sizeof(*fi_args), GFP_KERNEL);
+ if (!fi_args)
+ return -ENOMEM;
+
+ fi_args->num_devices = fs_devices->num_devices;
+ memcpy(&fi_args->fsid, root->fs_info->fsid, sizeof(fi_args->fsid));
mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
- if (device->devid > fi_args.max_id)
- fi_args.max_id = device->devid;
+ if (device->devid > fi_args->max_id)
+ fi_args->max_id = device->devid;
}
mutex_unlock(&fs_devices->device_list_mutex);
- if (copy_to_user(arg, &fi_args, sizeof(fi_args)))
- return -EFAULT;
+ if (copy_to_user(arg, fi_args, sizeof(*fi_args)))
+ ret = -EFAULT;
- return 0;
+ kfree(fi_args);
+ return ret;
}
static long btrfs_ioctl_dev_info(struct btrfs_root *root, void __user *arg)
* Boston, MA 021110-1307, USA.
*/
-#include <linux/sched.h>
-#include <linux/pagemap.h>
-#include <linux/writeback.h>
#include <linux/blkdev.h>
-#include <linux/rbtree.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
#include "ctree.h"
#include "volumes.h"
#include "disk-io.h"
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
-
- l = path->nodes[0];
- slot = path->slots[0];
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid != logical) {
- ret = btrfs_previous_item(root, path, 0,
- BTRFS_EXTENT_ITEM_KEY);
- if (ret < 0)
- goto out;
- }
+ goto out_noplug;
+ /*
+ * we might miss half an extent here, but that doesn't matter,
+ * as it's only the prefetch
+ */
while (1) {
l = path->nodes[0];
slot = path->slots[0];
if (ret == 0)
continue;
if (ret < 0)
- goto out;
+ goto out_noplug;
break;
}
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
goto out;
-
- l = path->nodes[0];
- slot = path->slots[0];
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid != logical) {
+ if (ret > 0) {
ret = btrfs_previous_item(root, path, 0,
BTRFS_EXTENT_ITEM_KEY);
if (ret < 0)
goto out;
+ if (ret > 0) {
+ /* there's no smaller item, so stick with the
+ * larger one */
+ btrfs_release_path(path);
+ ret = btrfs_search_slot(NULL, root, &key,
+ path, 0, 0);
+ if (ret < 0)
+ goto out;
+ }
}
while (1) {
out:
blk_finish_plug(&plug);
+out_noplug:
btrfs_free_path(path);
return ret < 0 ? ret : 0;
}
while (1) {
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
- ret = 0;
+ break;
+ if (ret > 0) {
+ if (path->slots[0] >=
+ btrfs_header_nritems(path->nodes[0])) {
+ ret = btrfs_next_leaf(root, path);
+ if (ret)
+ break;
+ }
+ }
l = path->nodes[0];
slot = path->slots[0];
if (found_key.objectid != sdev->dev->devid)
break;
- if (btrfs_key_type(&key) != BTRFS_DEV_EXTENT_KEY)
+ if (btrfs_key_type(&found_key) != BTRFS_DEV_EXTENT_KEY)
break;
if (found_key.offset >= end)
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
if (!cache) {
ret = -ENOENT;
- goto out;
+ break;
}
ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
chunk_offset, length);
btrfs_release_path(path);
}
-out:
btrfs_free_path(path);
- return ret;
+
+ /*
+ * ret can still be 1 from search_slot or next_leaf,
+ * that's not an error
+ */
+ return ret < 0 ? ret : 0;
}
static noinline_for_stack int scrub_supers(struct scrub_dev *sdev)
struct btrfs_fs_info *fs_info = root->fs_info;
mutex_lock(&fs_info->scrub_lock);
- if (fs_info->scrub_workers_refcnt == 0)
+ if (fs_info->scrub_workers_refcnt == 0) {
+ btrfs_init_workers(&fs_info->scrub_workers, "scrub",
+ fs_info->thread_pool_size, &fs_info->generic_worker);
+ fs_info->scrub_workers.idle_thresh = 4;
btrfs_start_workers(&fs_info->scrub_workers, 1);
+ }
++fs_info->scrub_workers_refcnt;
mutex_unlock(&fs_info->scrub_lock);
list) {
if (t->in_commit) {
if (t->commit_done)
- goto out;
+ break;
cur_trans = t;
atomic_inc(&cur_trans->use_count);
break;
wait_current_trans_commit_start_and_unblock(root, cur_trans);
else
wait_current_trans_commit_start(root, cur_trans);
- put_transaction(cur_trans);
+ if (current->journal_info == trans)
+ current->journal_info = NULL;
+
+ put_transaction(cur_trans);
return 0;
}
transid = btrfs_super_generation(disk_super);
if (disk_super->label[0])
printk(KERN_INFO "device label %s ", disk_super->label);
- else {
- /* FIXME, make a readl uuid parser */
- printk(KERN_INFO "device fsid %llx-%llx ",
- *(unsigned long long *)disk_super->fsid,
- *(unsigned long long *)(disk_super->fsid + 8));
- }
+ else
+ printk(KERN_INFO "device fsid %pU ", disk_super->fsid);
printk(KERN_CONT "devid %llu transid %llu %s\n",
(unsigned long long)devid, (unsigned long long)transid, path);
ret = device_list_add(path, disk_super, devid, fs_devices_ret);
int err;
struct inode *inode = page->mapping->host;
BUG_ON(!inode);
- igrab(inode);
+ ihold(inode);
err = writepage_nounlock(page, wbc);
unlock_page(page);
iput(inode);
while (!list_empty(&mdsc->cap_dirty)) {
ci = list_first_entry(&mdsc->cap_dirty, struct ceph_inode_info,
i_dirty_item);
- inode = igrab(&ci->vfs_inode);
+ inode = &ci->vfs_inode;
+ ihold(inode);
dout("flush_dirty_caps %p\n", inode);
spin_unlock(&mdsc->cap_dirty_lock);
- if (inode) {
- ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH,
- NULL);
- iput(inode);
- }
+ ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH, NULL);
+ iput(inode);
spin_lock(&mdsc->cap_dirty_lock);
}
spin_unlock(&mdsc->cap_dirty_lock);
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_dentry = dget(filp->f_dentry);
/* hints to request -> mds selection code */
req->r_direct_mode = USE_AUTH_MDS;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
- if (err)
+ if (err) {
d_drop(dentry);
- else if (!req->r_reply_info.head->is_dentry)
- d_instantiate(dentry, igrab(old_dentry->d_inode));
+ } else if (!req->r_reply_info.head->is_dentry) {
+ ihold(old_dentry->d_inode);
+ d_instantiate(dentry, old_dentry->d_inode);
+ }
ceph_mdsc_put_request(req);
return err;
}
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode)
- igrab(inode);
+ ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(-ESTALE);
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode)
- igrab(inode);
+ ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(err ? err : -ESTALE);
err = PTR_ERR(req);
goto out;
}
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, parent_inode, req);
if (!err)
static int striped_read(struct inode *inode,
u64 off, u64 len,
struct page **pages, int num_pages,
- int *checkeof, bool align_to_pages,
+ int *checkeof, bool o_direct,
unsigned long buf_align)
{
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
io_align = off & ~PAGE_MASK;
more:
- if (align_to_pages)
+ if (o_direct)
page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
else
page_align = pos & ~PAGE_MASK;
ci->i_truncate_seq,
ci->i_truncate_size,
page_pos, pages_left, page_align);
- hit_stripe = this_len < left;
- was_short = ret >= 0 && ret < this_len;
if (ret == -ENOENT)
ret = 0;
+ hit_stripe = this_len < left;
+ was_short = ret >= 0 && ret < this_len;
dout("striped_read %llu~%u (read %u) got %d%s%s\n", pos, left, read,
ret, hit_stripe ? " HITSTRIPE" : "", was_short ? " SHORT" : "");
}
if (was_short) {
- /* was original extent fully inside i_size? */
- if (pos + left <= inode->i_size) {
- dout("zero tail\n");
- ceph_zero_page_vector_range(page_off + read, len - read,
+ /* did we bounce off eof? */
+ if (pos + left > inode->i_size)
+ *checkeof = 1;
+
+ /* zero trailing bytes (inside i_size) */
+ if (left > 0 && pos < inode->i_size) {
+ if (pos + left > inode->i_size)
+ left = inode->i_size - pos;
+
+ dout("zero tail %d\n", left);
+ ceph_zero_page_vector_range(page_off + read, left,
pages);
- read = len;
- goto out;
+ read += left;
}
-
- /* check i_size */
- *checkeof = 1;
}
-out:
if (ret >= 0)
ret = read;
dout("striped_read returns %d\n", ret);
/* hit EOF or hole? */
if (statret == 0 && *ppos < inode->i_size) {
- dout("aio_read sync_read hit hole, reading more\n");
+ dout("aio_read sync_read hit hole, ppos %lld < size %lld, reading more\n", *ppos, inode->i_size);
read += ret;
base += ret;
len -= ret;
goto done;
}
req->r_dentry = dn; /* may have spliced */
- igrab(in);
+ ihold(in);
} else if (ceph_ino(in) == vino.ino &&
ceph_snap(in) == vino.snap) {
- igrab(in);
+ ihold(in);
} else {
dout(" %p links to %p %llx.%llx, not %llx.%llx\n",
dn, in, ceph_ino(in), ceph_snap(in),
goto done;
}
req->r_dentry = dn; /* may have spliced */
- igrab(in);
+ ihold(in);
rinfo->head->is_dentry = 1; /* fool notrace handlers */
}
if (queue_work(ceph_inode_to_client(inode)->wb_wq,
&ceph_inode(inode)->i_wb_work)) {
dout("ceph_queue_writeback %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_writeback %p failed\n", inode);
}
if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
&ceph_inode(inode)->i_pg_inv_work)) {
dout("ceph_queue_invalidate %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_invalidate %p failed\n", inode);
}
if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
&ci->i_vmtruncate_work)) {
dout("ceph_queue_vmtruncate %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
inode, ci->i_truncate_pending);
__mark_inode_dirty(inode, inode_dirty_flags);
if (mask) {
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = release;
req->r_args.setattr.mask = cpu_to_le32(mask);
req->r_num_caps = 1;
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_num_caps = 1;
req->r_args.getattr.mask = cpu_to_le32(mask);
err = ceph_mdsc_do_request(mdsc, NULL, req);
USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_EXCL;
req->r_args.setlayout.layout.fl_stripe_unit =
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_args.setlayout.layout.fl_stripe_unit =
cpu_to_le32(l.stripe_unit);
req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
/* mds requires start and length rather than start and end */
if (LLONG_MAX == fl->fl_end)
length = fl->fl_end - fl->fl_start + 1;
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d", (int)lock_type,
+ "length: %llu, wait: %d, type: %d", (int)lock_type,
(int)operation, (u64)fl->fl_pid, fl->fl_start,
length, wait, fl->fl_type);
-
req->r_args.filelock_change.rule = lock_type;
req->r_args.filelock_change.type = cmd;
req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
}
ceph_mdsc_put_request(req);
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+ "length: %llu, wait: %d, type: %d, err code %d", (int)lock_type,
(int)operation, (u64)fl->fl_pid, fl->fl_start,
length, wait, fl->fl_type, err);
return err;
dout("mds locked, locking locally");
err = posix_lock_file(file, fl, NULL);
if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
- /* undo! This should only happen if the kernel detects
- * local deadlock. */
+ /* undo! This should only happen if
+ * the kernel detects local
+ * deadlock. */
ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
CEPH_LOCK_UNLOCK, 0, fl);
- dout("got %d on posix_lock_file, undid lock", err);
+ dout("got %d on posix_lock_file, undid lock",
+ err);
}
}
- } else {
- dout("mds returned error code %d", err);
+ } else if (err == -ERESTARTSYS) {
+ dout("undoing lock\n");
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ CEPH_LOCK_UNLOCK, 0, fl);
}
return err;
}
file, CEPH_LOCK_UNLOCK, 0, fl);
dout("got %d on flock_lock_file_wait, undid lock", err);
}
- } else {
- dout("mds error code %d", err);
+ } else if (err == -ERESTARTSYS) {
+ dout("undoing lock\n");
+ ceph_lock_message(CEPH_LOCK_FLOCK,
+ CEPH_MDS_OP_SETFILELOCK,
+ file, CEPH_LOCK_UNLOCK, 0, fl);
}
return err;
}
ci = list_first_entry(&mdsc->snap_flush_list,
struct ceph_inode_info, i_snap_flush_item);
inode = &ci->vfs_inode;
- igrab(inode);
+ ihold(inode);
spin_unlock(&mdsc->snap_flush_lock);
spin_lock(&inode->i_lock);
__ceph_flush_snaps(ci, &session, 0);
err = PTR_ERR(req);
goto out;
}
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
req->r_num_caps = 1;
req->r_args.setxattr.flags = cpu_to_le32(flags);
USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
req->r_num_caps = 1;
req->r_path2 = kstrdup(name, GFP_NOFS);
break;
default:
- cERROR(1, "CIFS: Unknown network family '%d'", sa->sa_family);
+ cERROR(1, "Unknown network family '%d'", sa->sa_family);
key_len = 0;
break;
}
sharename = extract_sharename(tcon->treeName);
if (IS_ERR(sharename)) {
- cFYI(1, "CIFS: couldn't extract sharename\n");
+ cFYI(1, "%s: couldn't extract sharename\n", __func__);
sharename = NULL;
return 0;
}
pagevec_init(&pvec, 0);
first = 0;
- cFYI(1, "cifs inode 0x%p now uncached", cifsi);
+ cFYI(1, "%s: cifs inode 0x%p now uncached", __func__, cifsi);
for (;;) {
nr_pages = pagevec_lookup(&pvec,
}
}
+static void
+cifs_show_security(struct seq_file *s, struct TCP_Server_Info *server)
+{
+ seq_printf(s, ",sec=");
+
+ switch (server->secType) {
+ case LANMAN:
+ seq_printf(s, "lanman");
+ break;
+ case NTLMv2:
+ seq_printf(s, "ntlmv2");
+ break;
+ case NTLM:
+ seq_printf(s, "ntlm");
+ break;
+ case Kerberos:
+ seq_printf(s, "krb5");
+ break;
+ case RawNTLMSSP:
+ seq_printf(s, "ntlmssp");
+ break;
+ default:
+ /* shouldn't ever happen */
+ seq_printf(s, "unknown");
+ break;
+ }
+
+ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ seq_printf(s, "i");
+}
+
/*
* cifs_show_options() is for displaying mount options in /proc/mounts.
* Not all settable options are displayed but most of the important
struct sockaddr *srcaddr;
srcaddr = (struct sockaddr *)&tcon->ses->server->srcaddr;
+ cifs_show_security(s, tcon->ses->server);
+
seq_printf(s, ",unc=%s", tcon->treeName);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER)
extern const struct export_operations cifs_export_ops;
#endif /* CIFS_NFSD_EXPORT */
-#define CIFS_VERSION "1.72"
+#define CIFS_VERSION "1.73"
#endif /* _CIFSFS_H */
mid_entry->callback(mid_entry);
}
- while (server->tcpStatus == CifsNeedReconnect) {
+ do {
try_to_freeze();
/* we should try only the port we connected to before */
server->tcpStatus = CifsNeedNegotiate;
spin_unlock(&GlobalMid_Lock);
}
- }
+ } while (server->tcpStatus == CifsNeedReconnect);
return rc;
}
}
static inline struct tcon_link *
-cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb);
+cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
+{
+ return cifs_sb->master_tlink;
+}
static int
compare_mount_options(struct super_block *sb, struct cifs_mnt_data *mnt_data)
return rc;
}
+/*
+ * Issue a TREE_CONNECT request. Note that for IPC$ shares, that the tcon
+ * pointer may be NULL.
+ */
int
CIFSTCon(unsigned int xid, struct cifs_ses *ses,
const char *tree, struct cifs_tcon *tcon,
pSMB->AndXCommand = 0xFF;
pSMB->Flags = cpu_to_le16(TCON_EXTENDED_SECINFO);
bcc_ptr = &pSMB->Password[0];
- if ((ses->server->sec_mode) & SECMODE_USER) {
+ if (!tcon || (ses->server->sec_mode & SECMODE_USER)) {
pSMB->PasswordLength = cpu_to_le16(1); /* minimum */
*bcc_ptr = 0; /* password is null byte */
bcc_ptr++; /* skip password */
}
if (rc == 0) {
spin_lock(&GlobalMid_Lock);
- if (server->tcpStatus != CifsExiting)
+ if (server->tcpStatus == CifsNeedNegotiate)
server->tcpStatus = CifsGood;
else
rc = -EHOSTDOWN;
return tcon;
}
-static inline struct tcon_link *
-cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
-{
- return cifs_sb->master_tlink;
-}
-
struct cifs_tcon *
cifs_sb_master_tcon(struct cifs_sb_info *cifs_sb)
{
server->fscache =
fscache_acquire_cookie(cifs_fscache_netfs.primary_index,
&cifs_fscache_server_index_def, server);
- cFYI(1, "CIFS: get client cookie (0x%p/0x%p)", server,
- server->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server,
+ server->fscache);
}
void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server)
{
- cFYI(1, "CIFS: release client cookie (0x%p/0x%p)", server,
- server->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server,
+ server->fscache);
fscache_relinquish_cookie(server->fscache, 0);
server->fscache = NULL;
}
tcon->fscache =
fscache_acquire_cookie(server->fscache,
&cifs_fscache_super_index_def, tcon);
- cFYI(1, "CIFS: get superblock cookie (0x%p/0x%p)",
- server->fscache, tcon->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server->fscache,
+ tcon->fscache);
}
void cifs_fscache_release_super_cookie(struct cifs_tcon *tcon)
{
- cFYI(1, "CIFS: releasing superblock cookie (0x%p)", tcon->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, tcon->fscache);
fscache_relinquish_cookie(tcon->fscache, 0);
tcon->fscache = NULL;
}
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
&cifs_fscache_inode_object_def, cifsi);
- cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
- cifsi->fscache);
+ cFYI(1, "%s: got FH cookie (0x%p/0x%p)", __func__,
+ tcon->fscache, cifsi->fscache);
}
}
struct cifsInodeInfo *cifsi = CIFS_I(inode);
if (cifsi->fscache) {
- cFYI(1, "CIFS releasing inode cookie (0x%p)",
- cifsi->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache);
fscache_relinquish_cookie(cifsi->fscache, 0);
cifsi->fscache = NULL;
}
struct cifsInodeInfo *cifsi = CIFS_I(inode);
if (cifsi->fscache) {
- cFYI(1, "CIFS disabling inode cookie (0x%p)",
- cifsi->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache);
fscache_relinquish_cookie(cifsi->fscache, 1);
cifsi->fscache = NULL;
}
cifs_sb_master_tcon(cifs_sb)->fscache,
&cifs_fscache_inode_object_def,
cifsi);
- cFYI(1, "CIFS: new cookie 0x%p oldcookie 0x%p",
- cifsi->fscache, old);
+ cFYI(1, "%s: new cookie 0x%p oldcookie 0x%p",
+ __func__, cifsi->fscache, old);
}
}
struct inode *inode = page->mapping->host;
struct cifsInodeInfo *cifsi = CIFS_I(inode);
- cFYI(1, "CIFS: fscache release page (0x%p/0x%p)",
- page, cifsi->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, page,
+ cifsi->fscache);
if (!fscache_maybe_release_page(cifsi->fscache, page, gfp))
return 0;
}
static void cifs_readpage_from_fscache_complete(struct page *page, void *ctx,
int error)
{
- cFYI(1, "CFS: readpage_from_fscache_complete (0x%p/%d)",
- page, error);
+ cFYI(1, "%s: (0x%p/%d)", __func__, page, error);
if (!error)
SetPageUptodate(page);
unlock_page(page);
{
int ret;
- cFYI(1, "CIFS: readpage_from_fscache(fsc:%p, p:%p, i:0x%p",
+ cFYI(1, "%s: (fsc:%p, p:%p, i:0x%p", __func__,
CIFS_I(inode)->fscache, page, inode);
ret = fscache_read_or_alloc_page(CIFS_I(inode)->fscache, page,
cifs_readpage_from_fscache_complete,
switch (ret) {
case 0: /* page found in fscache, read submitted */
- cFYI(1, "CIFS: readpage_from_fscache: submitted");
+ cFYI(1, "%s: submitted", __func__);
return ret;
case -ENOBUFS: /* page won't be cached */
case -ENODATA: /* page not in cache */
- cFYI(1, "CIFS: readpage_from_fscache %d", ret);
+ cFYI(1, "%s: %d", __func__, ret);
return 1;
default:
{
int ret;
- cFYI(1, "CIFS: __cifs_readpages_from_fscache (0x%p/%u/0x%p)",
+ cFYI(1, "%s: (0x%p/%u/0x%p)", __func__,
CIFS_I(inode)->fscache, *nr_pages, inode);
ret = fscache_read_or_alloc_pages(CIFS_I(inode)->fscache, mapping,
pages, nr_pages,
mapping_gfp_mask(mapping));
switch (ret) {
case 0: /* read submitted to the cache for all pages */
- cFYI(1, "CIFS: readpages_from_fscache: submitted");
+ cFYI(1, "%s: submitted", __func__);
return ret;
case -ENOBUFS: /* some pages are not cached and can't be */
case -ENODATA: /* some pages are not cached */
- cFYI(1, "CIFS: readpages_from_fscache: no page");
+ cFYI(1, "%s: no page", __func__);
return 1;
default:
{
int ret;
- cFYI(1, "CIFS: readpage_to_fscache(fsc: %p, p: %p, i: %p",
+ cFYI(1, "%s: (fsc: %p, p: %p, i: %p)", __func__,
CIFS_I(inode)->fscache, page, inode);
ret = fscache_write_page(CIFS_I(inode)->fscache, page, GFP_KERNEL);
if (ret != 0)
struct cifsInodeInfo *cifsi = CIFS_I(inode);
struct fscache_cookie *cookie = cifsi->fscache;
- cFYI(1, "CIFS: fscache invalidatepage (0x%p/0x%p)", page, cookie);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, page, cookie);
fscache_wait_on_page_write(cookie, page);
fscache_uncache_page(cookie, page);
}
/* FIXME: (deleted) ? */
path = d_path(&dcs->path, kbuf, PAGE_SIZE);
+ mutex_unlock(&dcookie_mutex);
+
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out_free;
out_free:
kfree(kbuf);
+ return err;
out:
mutex_unlock(&dcookie_mutex);
return err;
path[level].bp_bh = NULL;
}
+static void nilfs_btree_nop(struct nilfs_bmap *btree,
+ struct nilfs_btree_path *path,
+ int level, __u64 *keyp, __u64 *ptrp)
+{
+}
static int nilfs_btree_prepare_delete(struct nilfs_bmap *btree,
struct nilfs_btree_path *path,
struct buffer_head *bh;
struct nilfs_btree_node *node, *parent, *sib;
__u64 sibptr;
- int pindex, level, ncmin, ncmax, ncblk, ret;
+ int pindex, dindex, level, ncmin, ncmax, ncblk, ret;
ret = 0;
stats->bs_nblocks = 0;
ncmin = NILFS_BTREE_NODE_NCHILDREN_MIN(nilfs_btree_node_size(btree));
ncblk = nilfs_btree_nchildren_per_block(btree);
- for (level = NILFS_BTREE_LEVEL_NODE_MIN;
+ for (level = NILFS_BTREE_LEVEL_NODE_MIN, dindex = path[level].bp_index;
level < nilfs_btree_height(btree) - 1;
level++) {
node = nilfs_btree_get_nonroot_node(path, level);
path[level].bp_oldreq.bpr_ptr =
- nilfs_btree_node_get_ptr(node, path[level].bp_index,
- ncblk);
+ nilfs_btree_node_get_ptr(node, dindex, ncblk);
ret = nilfs_bmap_prepare_end_ptr(btree,
&path[level].bp_oldreq, dat);
if (ret < 0)
parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
pindex = path[level + 1].bp_index;
+ dindex = pindex;
if (pindex > 0) {
/* left sibling */
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_concat_right;
stats->bs_nblocks++;
+ /*
+ * When merging right sibling node
+ * into the current node, pointer to
+ * the right sibling node must be
+ * terminated instead. The adjustment
+ * below is required for that.
+ */
+ dindex = pindex + 1;
/* continue; */
}
} else {
NILFS_BTREE_ROOT_NCHILDREN_MAX) {
path[level].bp_op = nilfs_btree_shrink;
stats->bs_nblocks += 2;
+ level++;
+ path[level].bp_op = nilfs_btree_nop;
+ goto shrink_root_child;
} else {
path[level].bp_op = nilfs_btree_do_delete;
stats->bs_nblocks++;
+ goto out;
}
-
- goto out;
-
}
}
+ /* child of the root node is deleted */
+ path[level].bp_op = nilfs_btree_do_delete;
+ stats->bs_nblocks++;
+
+shrink_root_child:
node = nilfs_btree_get_root(btree);
path[level].bp_oldreq.bpr_ptr =
- nilfs_btree_node_get_ptr(node, path[level].bp_index,
+ nilfs_btree_node_get_ptr(node, dindex,
NILFS_BTREE_ROOT_NCHILDREN_MAX);
ret = nilfs_bmap_prepare_end_ptr(btree, &path[level].bp_oldreq, dat);
if (ret < 0)
goto err_out_child_node;
- /* child of the root node is deleted */
- path[level].bp_op = nilfs_btree_do_delete;
- stats->bs_nblocks++;
-
/* success */
out:
*levelp = level;
sci->sc_watermark = NILFS_SC_DEFAULT_WATERMARK;
if (nilfs->ns_interval)
- sci->sc_interval = nilfs->ns_interval;
+ sci->sc_interval = HZ * nilfs->ns_interval;
if (nilfs->ns_watermark)
sci->sc_watermark = nilfs->ns_watermark;
return sci;
pmd_t pmd = *pmdp;
pmd_clear(mm, address, pmdp);
return pmd;
-})
+}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/compiler.h>
+#include <linux/spinlock_types.h>
struct bgpio_pdata {
int base;
__u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autonet' here non-zero to have the
+ * being true) the user may set 'autoneg' here non-zero to have the
* pause parameters be auto-negotiated too. In such a case, the
* {rx,tx}_pause values below determine what capabilities are
* advertised.
* @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
* are turned on or off.
* @set_tx_csum: Deprecated in favour of generic netdev features. Turn
- * transmit checksums on or off. Returns a egative error code or zero.
+ * transmit checksums on or off. Returns a negative error code or zero.
* @get_sg: Deprecated as redundant. Report whether scatter-gather is
* enabled.
* @set_sg: Deprecated in favour of generic netdev features. Turn
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
* devices settings, these indicate the current mode and whether
- * it was foced up into this mode or autonegotiated.
+ * it was forced up into this mode or autonegotiated.
*/
/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
--- /dev/null
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8870
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8870_H
+#define __LINUX_I2C_ADP8870_H
+
+#define ID_ADP8870 8870
+
+#define ADP8870_MAX_BRIGHTNESS 0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT)
+
+#define ADP8870_LED_ONT_200ms 0
+#define ADP8870_LED_ONT_600ms 1
+#define ADP8870_LED_ONT_800ms 2
+#define ADP8870_LED_ONT_1200ms 3
+
+#define ADP8870_LED_D7 (7)
+#define ADP8870_LED_D6 (6)
+#define ADP8870_LED_D5 (5)
+#define ADP8870_LED_D4 (4)
+#define ADP8870_LED_D3 (3)
+#define ADP8870_LED_D2 (2)
+#define ADP8870_LED_D1 (1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8870_BL_D7 (1 << 6)
+#define ADP8870_BL_D6 (1 << 5)
+#define ADP8870_BL_D5 (1 << 4)
+#define ADP8870_BL_D4 (1 << 3)
+#define ADP8870_BL_D3 (1 << 2)
+#define ADP8870_BL_D2 (1 << 1)
+#define ADP8870_BL_D1 (1 << 0)
+
+#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */
+#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */
+#define ADP8870_FADE_T_600ms 2
+#define ADP8870_FADE_T_900ms 3
+#define ADP8870_FADE_T_1200ms 4
+#define ADP8870_FADE_T_1500ms 5
+#define ADP8870_FADE_T_1800ms 6
+#define ADP8870_FADE_T_2100ms 7
+#define ADP8870_FADE_T_2400ms 8
+#define ADP8870_FADE_T_2700ms 9
+#define ADP8870_FADE_T_3000ms 10
+#define ADP8870_FADE_T_3500ms 11
+#define ADP8870_FADE_T_4000ms 12
+#define ADP8870_FADE_T_4500ms 13
+#define ADP8870_FADE_T_5000ms 14
+#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */
+
+#define ADP8870_FADE_LAW_LINEAR 0
+#define ADP8870_FADE_LAW_SQUARE 1
+#define ADP8870_FADE_LAW_CUBIC1 2
+#define ADP8870_FADE_LAW_CUBIC2 3
+
+#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */
+#define ADP8870_BL_AMBL_FILT_160ms 1
+#define ADP8870_BL_AMBL_FILT_320ms 2
+#define ADP8870_BL_AMBL_FILT_640ms 3
+#define ADP8870_BL_AMBL_FILT_1280ms 4
+#define ADP8870_BL_AMBL_FILT_2560ms 5
+#define ADP8870_BL_AMBL_FILT_5120ms 6
+#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..551uA
+ */
+#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551)
+
+/*
+ * L4 comparator current 0..275uA
+ */
+#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275)
+
+/*
+ * L5 comparator current 0..138uA
+ */
+#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138)
+
+struct adp8870_backlight_platform_data {
+ u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */
+ u8 pwm_assign; /* 1 = Enables PWM mode */
+
+ u8 bl_fade_in; /* Backlight Fade-In Timer */
+ u8 bl_fade_out; /* Backlight Fade-Out Timer */
+ u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */
+
+ u8 en_ambl_sens; /* 1 = enable ambient light sensor */
+ u8 abml_filt; /* Light sensor filter time */
+
+ u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+ u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+ /**
+ * Independent Current Sinks / LEDS
+ * Sinks not assigned to the Backlight can be exposed to
+ * user space using the LEDS CLASS interface
+ */
+
+ int num_leds;
+ struct led_info *leds;
+ u8 led_fade_in; /* LED Fade-In Timer */
+ u8 led_fade_out; /* LED Fade-Out Timer */
+ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
+ u8 led_on_time;
+};
+
+#endif /* __LINUX_I2C_ADP8870_H */
__u16 tp_mac;
__u16 tp_net;
__u16 tp_vlan_tci;
+ __u16 tp_padding;
};
/* Rx ring - header status */
__u32 tp_sec;
__u32 tp_nsec;
__u16 tp_vlan_tci;
+ __u16 tp_padding;
};
#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
}
/**
- * __vlan_put_tag - regular VLAN tag inserting
+ * vlan_insert_tag - regular VLAN tag inserting
* @skb: skbuff to tag
* @vlan_tci: VLAN TCI to insert
*
*
* Following the skb_unshare() example, in case of error, the calling function
* doesn't have to worry about freeing the original skb.
+ *
+ * Does not change skb->protocol so this function can be used during receive.
*/
-static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, u16 vlan_tci)
{
struct vlan_ethhdr *veth;
/* now, the TCI */
veth->h_vlan_TCI = htons(vlan_tci);
- skb->protocol = htons(ETH_P_8021Q);
+ return skb;
+}
+/**
+ * __vlan_put_tag - regular VLAN tag inserting
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Inserts the VLAN tag into @skb as part of the payload
+ * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
+ *
+ * Following the skb_unshare() example, in case of error, the calling function
+ * doesn't have to worry about freeing the original skb.
+ */
+static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+{
+ skb = vlan_insert_tag(skb, vlan_tci);
+ if (skb)
+ skb->protocol = htons(ETH_P_8021Q);
return skb;
}
#ifdef __CHECKER__
#define BUILD_BUG_ON_NOT_POWER_OF_2(n)
-#define BUILD_BUG_ON_ZERO(e)
-#define BUILD_BUG_ON_NULL(e)
+#define BUILD_BUG_ON_ZERO(e) (0)
+#define BUILD_BUG_ON_NULL(e) ((void*)0)
#define BUILD_BUG_ON(condition)
#else /* __CHECKER__ */
#ifndef _LINUX_KMSG_DUMP_H
#define _LINUX_KMSG_DUMP_H
+#include <linux/errno.h>
#include <linux/list.h>
enum kmsg_dump_reason {
extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
+extern struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm);
static inline
int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
return NULL;
}
+static inline struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+{
+ return NULL;
+}
+
static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
{
return 1;
extern struct kobj_ns_type_operations net_ns_type_operations;
-extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
+extern const char *netdev_drivername(const struct net_device *dev);
extern void linkwatch_run_queue(void);
/* >= this indicates reply direction */
IP_CT_IS_REPLY,
+ IP_CT_ESTABLISHED_REPLY = IP_CT_ESTABLISHED + IP_CT_IS_REPLY,
+ IP_CT_RELATED_REPLY = IP_CT_RELATED + IP_CT_IS_REPLY,
+ IP_CT_NEW_REPLY = IP_CT_NEW + IP_CT_IS_REPLY,
/* Number of distinct IP_CT types (no NEW in reply dirn). */
IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1
};
* Special handling for cmpxchg_double. cmpxchg_double is passed two
* percpu variables. The first has to be aligned to a double word
* boundary and the second has to follow directly thereafter.
+ * We enforce this on all architectures even if they don't support
+ * a double cmpxchg instruction, since it's a cheap requirement, and it
+ * avoids breaking the requirement for architectures with the instruction.
*/
#define __pcpu_double_call_return_bool(stem, pcp1, pcp2, ...) \
({ \
skb->tail += len;
}
+static inline void skb_reset_mac_len(struct sk_buff *skb)
+{
+ skb->mac_len = skb->network_header - skb->mac_header;
+}
+
#ifdef NET_SKBUFF_DATA_USES_OFFSET
static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
{
extern struct mm_struct *swap_token_mm;
extern void grab_swap_token(struct mm_struct *);
extern void __put_swap_token(struct mm_struct *);
+extern void disable_swap_token(struct mem_cgroup *memcg);
static inline int has_swap_token(struct mm_struct *mm)
{
__put_swap_token(mm);
}
-static inline void disable_swap_token(void)
-{
- put_swap_token(swap_token_mm);
-}
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
extern void
mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
return 0;
}
-static inline void disable_swap_token(void)
+static inline void disable_swap_token(struct mem_cgroup *memcg)
{
}
* (in whatever arch specific measurement units returned by node_distance())
* then switch on zone reclaim on boot.
*/
-#define RECLAIM_DISTANCE 20
+#define RECLAIM_DISTANCE 30
#endif
#ifndef PENALTY_FOR_NODE_WITH_CPUS
#define PENALTY_FOR_NODE_WITH_CPUS (1)
#endif
#ifndef UTS_NODENAME
-#define UTS_NODENAME "(none)" /* set by sethostname() */
+#define UTS_NODENAME CONFIG_DEFAULT_HOSTNAME /* set by sethostname() */
#endif
#ifndef UTS_DOMAINNAME
#include <linux/types.h>
#include <linux/tracepoint.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
#include "gfpflags.h"
#define RECLAIM_WB_ANON 0x0001u
show_reclaim_flags(__entry->reclaim_flags))
);
+TRACE_EVENT(replace_swap_token,
+ TP_PROTO(struct mm_struct *old_mm,
+ struct mm_struct *new_mm),
+
+ TP_ARGS(old_mm, new_mm),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, old_mm)
+ __field(unsigned int, old_prio)
+ __field(struct mm_struct*, new_mm)
+ __field(unsigned int, new_prio)
+ ),
+
+ TP_fast_assign(
+ __entry->old_mm = old_mm;
+ __entry->old_prio = old_mm ? old_mm->token_priority : 0;
+ __entry->new_mm = new_mm;
+ __entry->new_prio = new_mm->token_priority;
+ ),
+
+ TP_printk("old_token_mm=%p old_prio=%u new_token_mm=%p new_prio=%u",
+ __entry->old_mm, __entry->old_prio,
+ __entry->new_mm, __entry->new_prio)
+);
+
+DECLARE_EVENT_CLASS(put_swap_token_template,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+
+ TP_ARGS(swap_token_mm),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, swap_token_mm)
+ ),
+
+ TP_fast_assign(
+ __entry->swap_token_mm = swap_token_mm;
+ ),
+
+ TP_printk("token_mm=%p", __entry->swap_token_mm)
+);
+
+DEFINE_EVENT(put_swap_token_template, put_swap_token,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+ TP_ARGS(swap_token_mm)
+);
+
+DEFINE_EVENT_CONDITION(put_swap_token_template, disable_swap_token,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+ TP_ARGS(swap_token_mm),
+ TP_CONDITION(swap_token_mm != NULL)
+);
+
+TRACE_EVENT_CONDITION(update_swap_token_priority,
+ TP_PROTO(struct mm_struct *mm,
+ unsigned int old_prio,
+ struct mm_struct *swap_token_mm),
+
+ TP_ARGS(mm, old_prio, swap_token_mm),
+
+ TP_CONDITION(mm->token_priority != old_prio),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, mm)
+ __field(unsigned int, old_prio)
+ __field(unsigned int, new_prio)
+ __field(struct mm_struct*, swap_token_mm)
+ __field(unsigned int, swap_token_prio)
+ ),
+
+ TP_fast_assign(
+ __entry->mm = mm;
+ __entry->old_prio = old_prio;
+ __entry->new_prio = mm->token_priority;
+ __entry->swap_token_mm = swap_token_mm;
+ __entry->swap_token_prio = swap_token_mm ? swap_token_mm->token_priority : 0;
+ ),
+
+ TP_printk("mm=%p old_prio=%u new_prio=%u swap_token_mm=%p token_prio=%u",
+ __entry->mm, __entry->old_prio, __entry->new_prio,
+ __entry->swap_token_mm, __entry->swap_token_prio)
+);
#endif /* _TRACE_VMSCAN_H */
config CONSTRUCTORS
bool
depends on !UML
- default y
config HAVE_IRQ_WORK
bool
endchoice
+config DEFAULT_HOSTNAME
+ string "Default hostname"
+ default "(none)"
+ help
+ This option determines the default system hostname before userspace
+ calls sethostname(2). The kernel traditionally uses "(none)" here,
+ but you may wish to use a different default here to make a minimal
+ system more usable with less configuration.
+
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU && BLOCK
* If the upper limit and lower limit of the timer_rate is
* >= 12.5% apart, redo calibration.
*/
- printk(KERN_DEBUG "calibrate_delay_direct() timer_rate_max=%lu "
- "timer_rate_min=%lu pre_start=%lu pre_end=%lu\n",
- timer_rate_max, timer_rate_min, pre_start, pre_end);
if (start >= post_end)
printk(KERN_NOTICE "calibrate_delay_direct() ignoring "
"timer_rate as we had a TSC wrap around"
#ifdef CONFIG_MM_OWNER
/*
- * Task p is exiting and it owned mm, lets find a new owner for it
+ * A task is exiting. If it owned this mm, find a new owner for the mm.
*/
-static inline int
-mm_need_new_owner(struct mm_struct *mm, struct task_struct *p)
-{
- /*
- * If there are other users of the mm and the owner (us) is exiting
- * we need to find a new owner to take on the responsibility.
- */
- if (atomic_read(&mm->mm_users) <= 1)
- return 0;
- if (mm->owner != p)
- return 0;
- return 1;
-}
-
void mm_update_next_owner(struct mm_struct *mm)
{
struct task_struct *c, *g, *p = current;
retry:
- if (!mm_need_new_owner(mm, p))
+ /*
+ * If the exiting or execing task is not the owner, it's
+ * someone else's problem.
+ */
+ if (mm->owner != p)
return;
+ /*
+ * The current owner is exiting/execing and there are no other
+ * candidates. Do not leave the mm pointing to a possibly
+ * freed task structure.
+ */
+ if (atomic_read(&mm->mm_users) <= 1) {
+ mm->owner = NULL;
+ return;
+ }
read_lock(&tasklist_lock);
/*
config GCOV_KERNEL
bool "Enable gcov-based kernel profiling"
- depends on DEBUG_FS && CONSTRUCTORS
+ depends on DEBUG_FS
+ select CONSTRUCTORS
default n
---help---
This option enables gcov-based code profiling (e.g. for code coverage
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
int ret = 0;
+ if (!desc)
+ return -EINVAL;
+
/* wakeup-capable irqs can be shared between drivers that
* don't need to have the same sleep mode behaviors.
*/
* to move current somewhere else, making room for our non-migratable
* task.
*/
- if (p->prio == rq->curr->prio && !need_resched())
+ if (p->prio == rq->curr->prio && !test_tsk_need_resched(rq->curr))
check_preempt_equal_prio(rq, p);
#endif
}
int this_cpu = smp_processor_id();
int cpu = task_cpu(task);
+ /* Make sure the mask is initialized first */
+ if (unlikely(!lowest_mask))
+ return -1;
+
if (task->rt.nr_cpus_allowed == 1)
return -1; /* No other targets possible */
/**
* sys_rt_sigprocmask - change the list of currently blocked signals
* @how: whether to add, remove, or set signals
- * @set: stores pending signals
+ * @nset: stores pending signals
* @oset: previous value of signal mask if non-null
* @sigsetsize: size of sigset_t type
*/
{
char *func, *command, *next = buff;
struct ftrace_func_command *p;
- int ret;
+ int ret = -EINVAL;
func = strsep(&next, ":");
{
unsigned long *p;
unsigned long addr;
+ unsigned long flags;
mutex_lock(&ftrace_lock);
p = start;
ftrace_record_ip(addr);
}
+ /*
+ * Disable interrupts to prevent interrupts from executing
+ * code that is being modified.
+ */
+ local_irq_save(flags);
ftrace_update_code(mod);
+ local_irq_restore(flags);
mutex_unlock(&ftrace_lock);
return 0;
#ifdef CONFIG_FTRACE_STARTUP_TEST
-static int kprobe_trace_selftest_target(int a1, int a2, int a3,
- int a4, int a5, int a6)
+/*
+ * The "__used" keeps gcc from removing the function symbol
+ * from the kallsyms table.
+ */
+static __used int kprobe_trace_selftest_target(int a1, int a2, int a3,
+ int a4, int a5, int a6)
{
return a1 + a2 + a3 + a4 + a5 + a6;
}
/**
* __bitmap_parselist - convert list format ASCII string to bitmap
- * @bp: read nul-terminated user string from this buffer
+ * @buf: read nul-terminated user string from this buffer
* @buflen: buffer size in bytes. If string is smaller than this
* then it must be terminated with a \0.
* @is_user: location of buffer, 0 indicates kernel space
int nr_freepages = cc->nr_freepages;
struct list_head *freelist = &cc->freepages;
+ /*
+ * Initialise the free scanner. The starting point is where we last
+ * scanned from (or the end of the zone if starting). The low point
+ * is the end of the pageblock the migration scanner is using.
+ */
pfn = cc->free_pfn;
low_pfn = cc->migrate_pfn + pageblock_nr_pages;
- high_pfn = low_pfn;
+
+ /*
+ * Take care that if the migration scanner is at the end of the zone
+ * that the free scanner does not accidentally move to the next zone
+ * in the next isolation cycle.
+ */
+ high_pfn = min(low_pfn, pfn);
/*
* Isolate free pages until enough are available to migrate the
return isolated > (inactive + active) / 2;
}
+/* possible outcome of isolate_migratepages */
+typedef enum {
+ ISOLATE_ABORT, /* Abort compaction now */
+ ISOLATE_NONE, /* No pages isolated, continue scanning */
+ ISOLATE_SUCCESS, /* Pages isolated, migrate */
+} isolate_migrate_t;
+
/*
* Isolate all pages that can be migrated from the block pointed to by
* the migrate scanner within compact_control.
*/
-static unsigned long isolate_migratepages(struct zone *zone,
+static isolate_migrate_t isolate_migratepages(struct zone *zone,
struct compact_control *cc)
{
unsigned long low_pfn, end_pfn;
/* Do not cross the free scanner or scan within a memory hole */
if (end_pfn > cc->free_pfn || !pfn_valid(low_pfn)) {
cc->migrate_pfn = end_pfn;
- return 0;
+ return ISOLATE_NONE;
}
/*
* delay for some time until fewer pages are isolated
*/
while (unlikely(too_many_isolated(zone))) {
+ /* async migration should just abort */
+ if (!cc->sync)
+ return ISOLATE_ABORT;
+
congestion_wait(BLK_RW_ASYNC, HZ/10);
if (fatal_signal_pending(current))
- return 0;
+ return ISOLATE_ABORT;
}
/* Time to isolate some pages for migration */
trace_mm_compaction_isolate_migratepages(nr_scanned, nr_isolated);
- return cc->nr_migratepages;
+ return ISOLATE_SUCCESS;
}
/*
if (cc->free_pfn <= cc->migrate_pfn)
return COMPACT_COMPLETE;
- /* Compaction run is not finished if the watermark is not met */
- watermark = low_wmark_pages(zone);
- watermark += (1 << cc->order);
-
- if (!zone_watermark_ok(zone, cc->order, watermark, 0, 0))
- return COMPACT_CONTINUE;
-
/*
* order == -1 is expected when compacting via
* /proc/sys/vm/compact_memory
if (cc->order == -1)
return COMPACT_CONTINUE;
+ /* Compaction run is not finished if the watermark is not met */
+ watermark = low_wmark_pages(zone);
+ watermark += (1 << cc->order);
+
+ if (!zone_watermark_ok(zone, cc->order, watermark, 0, 0))
+ return COMPACT_CONTINUE;
+
/* Direct compactor: Is a suitable page free? */
for (order = cc->order; order < MAX_ORDER; order++) {
/* Job done if page is free of the right migratetype */
int fragindex;
unsigned long watermark;
+ /*
+ * order == -1 is expected when compacting via
+ * /proc/sys/vm/compact_memory
+ */
+ if (order == -1)
+ return COMPACT_CONTINUE;
+
/*
* Watermarks for order-0 must be met for compaction. Note the 2UL.
* This is because during migration, copies of pages need to be
if (!zone_watermark_ok(zone, 0, watermark, 0, 0))
return COMPACT_SKIPPED;
- /*
- * order == -1 is expected when compacting via
- * /proc/sys/vm/compact_memory
- */
- if (order == -1)
- return COMPACT_CONTINUE;
-
/*
* fragmentation index determines if allocation failures are due to
* low memory or external fragmentation
*
- * index of -1 implies allocations might succeed dependingon watermarks
+ * index of -1000 implies allocations might succeed depending on
+ * watermarks
* index towards 0 implies failure is due to lack of memory
* index towards 1000 implies failure is due to fragmentation
*
if (fragindex >= 0 && fragindex <= sysctl_extfrag_threshold)
return COMPACT_SKIPPED;
- if (fragindex == -1 && zone_watermark_ok(zone, order, watermark, 0, 0))
+ if (fragindex == -1000 && zone_watermark_ok(zone, order, watermark,
+ 0, 0))
return COMPACT_PARTIAL;
return COMPACT_CONTINUE;
unsigned long nr_migrate, nr_remaining;
int err;
- if (!isolate_migratepages(zone, cc))
+ switch (isolate_migratepages(zone, cc)) {
+ case ISOLATE_ABORT:
+ ret = COMPACT_PARTIAL;
+ goto out;
+ case ISOLATE_NONE:
continue;
+ case ISOLATE_SUCCESS:
+ ;
+ }
nr_migrate = cc->nr_migratepages;
err = migrate_pages(&cc->migratepages, compaction_alloc,
}
+out:
/* Release free pages and check accounting */
cc->nr_freepages -= release_freepages(&cc->freepages);
VM_BUG_ON(cc->nr_freepages != 0);
while (likely(khugepaged_enabled())) {
#ifndef CONFIG_NUMA
hpage = khugepaged_alloc_hugepage();
- if (unlikely(!hpage)) {
- count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
+ if (unlikely(!hpage))
break;
- }
- count_vm_event(THP_COLLAPSE_ALLOC);
#else
if (IS_ERR(hpage)) {
khugepaged_alloc_sleep();
WARN_ON(page_count(page) != 1);
prep_compound_huge_page(page, h->order);
prep_new_huge_page(h, page, page_to_nid(page));
+ /*
+ * If we had gigantic hugepages allocated at boot time, we need
+ * to restore the 'stolen' pages to totalram_pages in order to
+ * fix confusing memory reports from free(1) and another
+ * side-effects, like CommitLimit going negative.
+ */
+ if (h->order > (MAX_ORDER - 1))
+ totalram_pages += 1 << h->order;
}
}
slot = list_entry(slot->mm_list.next, struct mm_slot, mm_list);
ksm_scan.mm_slot = slot;
spin_unlock(&ksm_mmlist_lock);
+ /*
+ * Although we tested list_empty() above, a racing __ksm_exit
+ * of the last mm on the list may have removed it since then.
+ */
+ if (slot == &ksm_mm_head)
+ return NULL;
next_mm:
ksm_scan.address = 0;
ksm_scan.rmap_list = &slot->rmap_list;
static void mem_cgroup_get(struct mem_cgroup *mem);
static void mem_cgroup_put(struct mem_cgroup *mem);
static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
-static void drain_all_stock_async(void);
+static void drain_all_stock_async(struct mem_cgroup *mem);
static struct mem_cgroup_per_zone *
mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
struct mem_cgroup, css);
}
-static struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
{
struct mem_cgroup *mem = NULL;
excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
/* If memsw_is_minimum==1, swap-out is of-no-use. */
- if (root_mem->memsw_is_minimum)
+ if (!check_soft && root_mem->memsw_is_minimum)
noswap = true;
while (1) {
victim = mem_cgroup_select_victim(root_mem);
if (victim == root_mem) {
loop++;
- if (loop >= 1)
- drain_all_stock_async();
+ /*
+ * We are not draining per cpu cached charges during
+ * soft limit reclaim because global reclaim doesn't
+ * care about charges. It tries to free some memory and
+ * charges will not give any.
+ */
+ if (!check_soft && loop >= 1)
+ drain_all_stock_async(root_mem);
if (loop >= 2) {
/*
* If we have not been able to reclaim
struct mem_cgroup *cached; /* this never be root cgroup */
unsigned int nr_pages;
struct work_struct work;
+ unsigned long flags;
+#define FLUSHING_CACHED_CHARGE (0)
};
static DEFINE_PER_CPU(struct memcg_stock_pcp, memcg_stock);
-static atomic_t memcg_drain_count;
+static DEFINE_MUTEX(percpu_charge_mutex);
/*
* Try to consume stocked charge on this cpu. If success, one page is consumed
{
struct memcg_stock_pcp *stock = &__get_cpu_var(memcg_stock);
drain_stock(stock);
+ clear_bit(FLUSHING_CACHED_CHARGE, &stock->flags);
}
/*
* expects some charges will be back to res_counter later but cannot wait for
* it.
*/
-static void drain_all_stock_async(void)
+static void drain_all_stock_async(struct mem_cgroup *root_mem)
{
- int cpu;
- /* This function is for scheduling "drain" in asynchronous way.
- * The result of "drain" is not directly handled by callers. Then,
- * if someone is calling drain, we don't have to call drain more.
- * Anyway, WORK_STRUCT_PENDING check in queue_work_on() will catch if
- * there is a race. We just do loose check here.
+ int cpu, curcpu;
+ /*
+ * If someone calls draining, avoid adding more kworker runs.
*/
- if (atomic_read(&memcg_drain_count))
+ if (!mutex_trylock(&percpu_charge_mutex))
return;
/* Notify other cpus that system-wide "drain" is running */
- atomic_inc(&memcg_drain_count);
get_online_cpus();
+ /*
+ * Get a hint for avoiding draining charges on the current cpu,
+ * which must be exhausted by our charging. It is not required that
+ * this be a precise check, so we use raw_smp_processor_id() instead of
+ * getcpu()/putcpu().
+ */
+ curcpu = raw_smp_processor_id();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
- schedule_work_on(cpu, &stock->work);
+ struct mem_cgroup *mem;
+
+ if (cpu == curcpu)
+ continue;
+
+ mem = stock->cached;
+ if (!mem)
+ continue;
+ if (mem != root_mem) {
+ if (!root_mem->use_hierarchy)
+ continue;
+ /* check whether "mem" is under tree of "root_mem" */
+ if (!css_is_ancestor(&mem->css, &root_mem->css))
+ continue;
+ }
+ if (!test_and_set_bit(FLUSHING_CACHED_CHARGE, &stock->flags))
+ schedule_work_on(cpu, &stock->work);
}
put_online_cpus();
- atomic_dec(&memcg_drain_count);
+ mutex_unlock(&percpu_charge_mutex);
/* We don't wait for flush_work */
}
static void drain_all_stock_sync(void)
{
/* called when force_empty is called */
- atomic_inc(&memcg_drain_count);
+ mutex_lock(&percpu_charge_mutex);
schedule_on_each_cpu(drain_local_stock);
- atomic_dec(&memcg_drain_count);
+ mutex_unlock(&percpu_charge_mutex);
}
/*
{
.name = "numa_stat",
.open = mem_control_numa_stat_open,
+ .mode = S_IRUGO,
},
#endif
};
struct cgroup *old_cont,
struct task_struct *p)
{
- struct mm_struct *mm;
+ struct mm_struct *mm = get_task_mm(p);
- if (!mc.to)
- /* no need to move charge */
- return;
-
- mm = get_task_mm(p);
if (mm) {
- mem_cgroup_move_charge(mm);
+ if (mc.to)
+ mem_cgroup_move_charge(mm);
+ put_swap_token(mm);
mmput(mm);
}
- mem_cgroup_clear_mc();
+ if (mc.to)
+ mem_cgroup_clear_mc();
}
#else /* !CONFIG_MMU */
static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
#include <linux/swapops.h>
#include <linux/hugetlb.h>
#include <linux/memory_hotplug.h>
+#include <linux/mm_inline.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
put_page(page);
if (!ret) {
LIST_HEAD(pagelist);
-
+ inc_zone_page_state(page, NR_ISOLATED_ANON +
+ page_is_file_cache(page));
list_add(&page->lru, &pagelist);
ret = migrate_pages(&pagelist, new_page, MPOL_MF_MOVE_ALL,
0, true);
int force_flush = 0;
int rss[NR_MM_COUNTERS];
spinlock_t *ptl;
+ pte_t *start_pte;
pte_t *pte;
again:
init_rss_vec(rss);
- pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ start_pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ pte = start_pte;
arch_enter_lazy_mmu_mode();
do {
pte_t ptent = *pte;
add_mm_rss_vec(mm, rss);
arch_leave_lazy_mmu_mode();
- pte_unmap_unlock(pte - 1, ptl);
+ pte_unmap_unlock(start_pte, ptl);
/*
* mmu_gather ran out of room to batch pages, we break out of
/**
* unmap_vmas - unmap a range of memory covered by a list of vma's
- * @tlbp: address of the caller's struct mmu_gather
+ * @tlb: address of the caller's struct mmu_gather
* @vma: the starting vma
* @start_addr: virtual address at which to start unmapping
* @end_addr: virtual address at which to end unmapping
/* init node's zones as empty zones, we don't have any present pages.*/
free_area_init_node(nid, zones_size, start_pfn, zholes_size);
+ /*
+ * The node we allocated has no zone fallback lists. For avoiding
+ * to access not-initialized zonelist, build here.
+ */
+ build_all_zonelists(NULL);
+
return pgdat;
}
if (anon_vma)
return anon_vma;
try_prev:
- /*
- * It is potentially slow to have to call find_vma_prev here.
- * But it's only on the first write fault on the vma, not
- * every time, and we could devise a way to avoid it later
- * (e.g. stash info in next's anon_vma_node when assigning
- * an anon_vma, or when trying vma_merge). Another time.
- */
- BUG_ON(find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma);
+ near = vma->vm_prev;
if (!near)
goto none;
return -EINVAL;
/* Find the first overlapping VMA */
- vma = find_vma_prev(mm, start, &prev);
+ vma = find_vma(mm, start);
if (!vma)
return 0;
+ prev = vma->vm_prev;
/* we have start < vma->vm_end */
/* if it doesn't overlap, we have nothing.. */
}
#endif
-static int __meminit init_section_page_cgroup(unsigned long pfn)
+static int __meminit init_section_page_cgroup(unsigned long pfn, int nid)
{
struct page_cgroup *base, *pc;
struct mem_section *section;
unsigned long table_size;
unsigned long nr;
- int nid, index;
+ int index;
nr = pfn_to_section_nr(pfn);
section = __nr_to_section(nr);
if (section->page_cgroup)
return 0;
- nid = page_to_nid(pfn_to_page(pfn));
table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
base = alloc_page_cgroup(table_size, nid);
pc = base + index;
init_page_cgroup(pc, nr);
}
-
+ /*
+ * The passed "pfn" may not be aligned to SECTION. For the calculation
+ * we need to apply a mask.
+ */
+ pfn &= PAGE_SECTION_MASK;
section->page_cgroup = base - pfn;
total_usage += table_size;
return 0;
start = start_pfn & ~(PAGES_PER_SECTION - 1);
end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION);
+ if (nid == -1) {
+ /*
+ * In this case, "nid" already exists and contains valid memory.
+ * "start_pfn" passed to us is a pfn which is an arg for
+ * online__pages(), and start_pfn should exist.
+ */
+ nid = pfn_to_nid(start_pfn);
+ VM_BUG_ON(!node_state(nid, N_ONLINE));
+ }
+
for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) {
if (!pfn_present(pfn))
continue;
- fail = init_section_page_cgroup(pfn);
+ fail = init_section_page_cgroup(pfn, nid);
}
if (!fail)
return 0;
void __init page_cgroup_init(void)
{
unsigned long pfn;
- int fail = 0;
+ int nid;
if (mem_cgroup_disabled())
return;
- for (pfn = 0; !fail && pfn < max_pfn; pfn += PAGES_PER_SECTION) {
- if (!pfn_present(pfn))
- continue;
- fail = init_section_page_cgroup(pfn);
- }
- if (fail) {
- printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
- panic("Out of memory");
- } else {
- hotplug_memory_notifier(page_cgroup_callback, 0);
+ for_each_node_state(nid, N_HIGH_MEMORY) {
+ unsigned long start_pfn, end_pfn;
+
+ start_pfn = node_start_pfn(nid);
+ end_pfn = node_end_pfn(nid);
+ /*
+ * start_pfn and end_pfn may not be aligned to SECTION and the
+ * page->flags of out of node pages are not initialized. So we
+ * scan [start_pfn, the biggest section's pfn < end_pfn) here.
+ */
+ for (pfn = start_pfn;
+ pfn < end_pfn;
+ pfn = ALIGN(pfn + 1, PAGES_PER_SECTION)) {
+
+ if (!pfn_valid(pfn))
+ continue;
+ /*
+ * Nodes's pfns can be overlapping.
+ * We know some arch can have a nodes layout such as
+ * -------------pfn-------------->
+ * N0 | N1 | N2 | N0 | N1 | N2|....
+ */
+ if (pfn_to_nid(pfn) != nid)
+ continue;
+ if (init_section_page_cgroup(pfn, nid))
+ goto oom;
+ }
}
+ hotplug_memory_notifier(page_cgroup_callback, 0);
printk(KERN_INFO "allocated %ld bytes of page_cgroup\n", total_usage);
- printk(KERN_INFO "please try 'cgroup_disable=memory' option if you don't"
- " want memory cgroups\n");
+ printk(KERN_INFO "please try 'cgroup_disable=memory' option if you "
+ "don't want memory cgroups\n");
+ return;
+oom:
+ printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
+ panic("Out of memory");
}
void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
* Release an obj back to its cache. If the obj has a constructed state, it must
* be in this state _before_ it is released. Called with disabled ints.
*/
-static inline void __cache_free(struct kmem_cache *cachep, void *objp)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp,
+ void *caller)
{
struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
kmemleak_free_recursive(objp, cachep->flags);
- objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
+ objp = cache_free_debugcheck(cachep, objp, caller);
kmemcheck_slab_free(cachep, objp, obj_size(cachep));
debug_check_no_locks_freed(objp, obj_size(cachep));
if (!(cachep->flags & SLAB_DEBUG_OBJECTS))
debug_check_no_obj_freed(objp, obj_size(cachep));
- __cache_free(cachep, objp);
+ __cache_free(cachep, objp, __builtin_return_address(0));
local_irq_restore(flags);
trace_kmem_cache_free(_RET_IP_, objp);
c = virt_to_cache(objp);
debug_check_no_locks_freed(objp, obj_size(c));
debug_check_no_obj_freed(objp, obj_size(c));
- __cache_free(c, (void *)objp);
+ __cache_free(c, (void *)objp, __builtin_return_address(0));
local_irq_restore(flags);
}
EXPORT_SYMBOL(kfree);
BUILD_BUG_ON(PERCPU_DYNAMIC_EARLY_SIZE <
SLUB_PAGE_SHIFT * sizeof(struct kmem_cache_cpu));
-#ifdef CONFIG_CMPXCHG_LOCAL
/*
- * Must align to double word boundary for the double cmpxchg instructions
- * to work.
+ * Must align to double word boundary for the double cmpxchg
+ * instructions to work; see __pcpu_double_call_return_bool().
*/
- s->cpu_slab = __alloc_percpu(sizeof(struct kmem_cache_cpu), 2 * sizeof(void *));
-#else
- /* Regular alignment is sufficient */
- s->cpu_slab = alloc_percpu(struct kmem_cache_cpu);
-#endif
+ s->cpu_slab = __alloc_percpu(sizeof(struct kmem_cache_cpu),
+ 2 * sizeof(void *));
if (!s->cpu_slab)
return 0;
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/swap.h>
+#include <linux/memcontrol.h>
+
+#include <trace/events/vmscan.h>
+
+#define TOKEN_AGING_INTERVAL (0xFF)
static DEFINE_SPINLOCK(swap_token_lock);
struct mm_struct *swap_token_mm;
+struct mem_cgroup *swap_token_memcg;
static unsigned int global_faults;
+static unsigned int last_aging;
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
+{
+ struct mem_cgroup *memcg;
+
+ memcg = try_get_mem_cgroup_from_mm(mm);
+ if (memcg)
+ css_put(mem_cgroup_css(memcg));
+
+ return memcg;
+}
+#else
+static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
+{
+ return NULL;
+}
+#endif
void grab_swap_token(struct mm_struct *mm)
{
int current_interval;
+ unsigned int old_prio = mm->token_priority;
global_faults++;
return;
/* First come first served */
- if (swap_token_mm == NULL) {
- mm->token_priority = mm->token_priority + 2;
- swap_token_mm = mm;
- goto out;
+ if (!swap_token_mm)
+ goto replace_token;
+
+ if ((global_faults - last_aging) > TOKEN_AGING_INTERVAL) {
+ swap_token_mm->token_priority /= 2;
+ last_aging = global_faults;
}
- if (mm != swap_token_mm) {
- if (current_interval < mm->last_interval)
- mm->token_priority++;
- else {
- if (likely(mm->token_priority > 0))
- mm->token_priority--;
- }
- /* Check if we deserve the token */
- if (mm->token_priority > swap_token_mm->token_priority) {
- mm->token_priority += 2;
- swap_token_mm = mm;
- }
- } else {
- /* Token holder came in again! */
+ if (mm == swap_token_mm) {
mm->token_priority += 2;
+ goto update_priority;
+ }
+
+ if (current_interval < mm->last_interval)
+ mm->token_priority++;
+ else {
+ if (likely(mm->token_priority > 0))
+ mm->token_priority--;
}
+ /* Check if we deserve the token */
+ if (mm->token_priority > swap_token_mm->token_priority)
+ goto replace_token;
+
+update_priority:
+ trace_update_swap_token_priority(mm, old_prio, swap_token_mm);
+
out:
mm->faultstamp = global_faults;
mm->last_interval = current_interval;
spin_unlock(&swap_token_lock);
+ return;
+
+replace_token:
+ mm->token_priority += 2;
+ trace_replace_swap_token(swap_token_mm, mm);
+ swap_token_mm = mm;
+ swap_token_memcg = swap_token_memcg_from_mm(mm);
+ last_aging = global_faults;
+ goto out;
}
/* Called on process exit. */
void __put_swap_token(struct mm_struct *mm)
{
spin_lock(&swap_token_lock);
- if (likely(mm == swap_token_mm))
+ if (likely(mm == swap_token_mm)) {
+ trace_put_swap_token(swap_token_mm);
swap_token_mm = NULL;
+ swap_token_memcg = NULL;
+ }
spin_unlock(&swap_token_lock);
}
+
+static bool match_memcg(struct mem_cgroup *a, struct mem_cgroup *b)
+{
+ if (!a)
+ return true;
+ if (!b)
+ return true;
+ if (a == b)
+ return true;
+ return false;
+}
+
+void disable_swap_token(struct mem_cgroup *memcg)
+{
+ /* memcg reclaim don't disable unrelated mm token. */
+ if (match_memcg(memcg, swap_token_memcg)) {
+ spin_lock(&swap_token_lock);
+ if (match_memcg(memcg, swap_token_memcg)) {
+ trace_disable_swap_token(swap_token_mm);
+ swap_token_mm = NULL;
+ swap_token_memcg = NULL;
+ }
+ spin_unlock(&swap_token_lock);
+ }
+}
nr_lumpy_dirty++;
scan++;
} else {
- /* the page is freed already. */
- if (!page_count(cursor_page))
+ /*
+ * Check if the page is freed already.
+ *
+ * We can't use page_count() as that
+ * requires compound_head and we don't
+ * have a pin on the page here. If a
+ * page is tail, we may or may not
+ * have isolated the head, so assume
+ * it's not free, it'd be tricky to
+ * track the head status without a
+ * page pin.
+ */
+ if (!PageTail(cursor_page) &&
+ !atomic_read(&cursor_page->_count))
continue;
break;
}
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
sc->nr_scanned = 0;
if (!priority)
- disable_swap_token();
+ disable_swap_token(sc->mem_cgroup);
total_scanned += shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
/* The swap token gets in the way of swapout... */
if (!priority)
- disable_swap_token();
+ disable_swap_token(NULL);
all_zones_ok = 1;
balanced = 0;
return false;
skb->dev = vlan_dev;
+ if (skb->pkt_type == PACKET_OTHERHOST) {
+ /* Our lower layer thinks this is not local, let's make sure.
+ * This allows the VLAN to have a different MAC than the
+ * underlying device, and still route correctly. */
+ if (!compare_ether_addr(eth_hdr(skb)->h_dest,
+ vlan_dev->dev_addr))
+ skb->pkt_type = PACKET_HOST;
+ }
+
+ if (!(vlan_dev_info(vlan_dev)->flags & VLAN_FLAG_REORDER_HDR)) {
+ unsigned int offset = skb->data - skb_mac_header(skb);
+
+ /*
+ * vlan_insert_tag expect skb->data pointing to mac header.
+ * So change skb->data before calling it and change back to
+ * original position later
+ */
+ skb_push(skb, offset);
+ skb = *skbp = vlan_insert_tag(skb, skb->vlan_tci);
+ if (!skb)
+ return false;
+ skb_pull(skb, offset + VLAN_HLEN);
+ skb_reset_mac_len(skb);
+ }
+
skb->priority = vlan_get_ingress_priority(vlan_dev, skb->vlan_tci);
skb->vlan_tci = 0;
u64_stats_update_begin(&rx_stats->syncp);
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
-
- switch (skb->pkt_type) {
- case PACKET_BROADCAST:
- break;
- case PACKET_MULTICAST:
+ if (skb->pkt_type == PACKET_MULTICAST)
rx_stats->rx_multicast++;
- break;
- case PACKET_OTHERHOST:
- /* Our lower layer thinks this is not local, let's make sure.
- * This allows the VLAN to have a different MAC than the
- * underlying device, and still route correctly. */
- if (!compare_ether_addr(eth_hdr(skb)->h_dest,
- vlan_dev->dev_addr))
- skb->pkt_type = PACKET_HOST;
- break;
- }
u64_stats_update_end(&rx_stats->syncp);
return true;
}
EXPORT_SYMBOL(vlan_gro_frags);
-static struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
{
- if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
- if (skb_cow(skb, skb_headroom(skb)) < 0)
- skb = NULL;
- if (skb) {
- /* Lifted from Gleb's VLAN code... */
- memmove(skb->data - ETH_HLEN,
- skb->data - VLAN_ETH_HLEN, 12);
- skb->mac_header += VLAN_HLEN;
- }
- }
+ if (skb_cow(skb, skb_headroom(skb)) < 0)
+ return NULL;
+ memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
+ skb->mac_header += VLAN_HLEN;
+ skb_reset_mac_len(skb);
return skb;
}
skb_pull_rcsum(skb, VLAN_HLEN);
vlan_set_encap_proto(skb, vhdr);
- skb = vlan_check_reorder_header(skb);
+ skb = vlan_reorder_header(skb);
if (unlikely(!skb))
goto err_free;
{
}
+static u32 *fake_cow_metrics(struct dst_entry *dst, unsigned long old)
+{
+ return NULL;
+}
+
static struct dst_ops fake_dst_ops = {
.family = AF_INET,
.protocol = cpu_to_be16(ETH_P_IP),
.update_pmtu = fake_update_pmtu,
+ .cow_metrics = fake_cow_metrics,
};
/*
round_jiffies_relative(delay));
}
+static void complete_request(struct ceph_osd_request *req)
+{
+ if (req->r_safe_callback)
+ req->r_safe_callback(req, NULL);
+ complete_all(&req->r_safe_completion); /* fsync waiter */
+}
+
/*
* handle osd op reply. either call the callback if it is specified,
* or do the completion to wake up the waiting thread.
else
complete_all(&req->r_completion);
- if (flags & CEPH_OSD_FLAG_ONDISK) {
- if (req->r_safe_callback)
- req->r_safe_callback(req, msg);
- complete_all(&req->r_safe_completion); /* fsync waiter */
- }
+ if (flags & CEPH_OSD_FLAG_ONDISK)
+ complete_request(req);
done:
dout("req=%p req->r_linger=%d\n", req, req->r_linger);
__cancel_request(req);
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
+ complete_request(req);
dout("wait_request tid %llu canceled/timed out\n", req->r_tid);
return rc;
}
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
- skb->mac_len = skb->network_header - skb->mac_header;
+ skb_reset_mac_len(skb);
pt_prev = NULL;
oldsd->output_queue = NULL;
oldsd->output_queue_tailp = &oldsd->output_queue;
}
+ /* Append NAPI poll list from offline CPU. */
+ if (!list_empty(&oldsd->poll_list)) {
+ list_splice_init(&oldsd->poll_list, &sd->poll_list);
+ raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ }
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_enable();
/**
* netdev_drivername - network driver for the device
* @dev: network device
- * @buffer: buffer for resulting name
- * @len: size of buffer
*
* Determine network driver for device.
*/
-char *netdev_drivername(const struct net_device *dev, char *buffer, int len)
+const char *netdev_drivername(const struct net_device *dev)
{
const struct device_driver *driver;
const struct device *parent;
-
- if (len <= 0 || !buffer)
- return buffer;
- buffer[0] = 0;
+ const char *empty = "";
parent = dev->dev.parent;
-
if (!parent)
- return buffer;
+ return empty;
driver = parent->driver;
if (driver && driver->name)
- strlcpy(buffer, driver->name, len);
- return buffer;
+ return driver->name;
+ return empty;
}
static int __netdev_printk(const char *level, const struct net_device *dev,
struct file *file;
struct net *net;
- net = ERR_PTR(-EINVAL);
file = proc_ns_fget(fd);
- if (!file)
- goto out;
+ if (IS_ERR(file))
+ return ERR_CAST(file);
ei = PROC_I(file->f_dentry->d_inode);
- if (ei->ns_ops != &netns_operations)
- goto out;
+ if (ei->ns_ops == &netns_operations)
+ net = get_net(ei->ns);
+ else
+ net = ERR_PTR(-EINVAL);
- net = get_net(ei->ns);
-out:
- if (file)
- fput(file);
+ fput(file);
return net;
}
return -ENODEV;
}
+ if (ndev->master) {
+ printk(KERN_ERR "%s: %s is a slave device, aborting.\n",
+ np->name, np->dev_name);
+ err = -EBUSY;
+ goto put;
+ }
+
if (!netif_running(ndev)) {
unsigned long atmost, atleast;
int csummode = CHECKSUM_NONE;
struct rtable *rt = (struct rtable *)cork->dst;
- exthdrlen = transhdrlen ? rt->dst.header_len : 0;
+ skb = skb_peek_tail(queue);
+
+ exthdrlen = !skb ? rt->dst.header_len : 0;
length += exthdrlen;
transhdrlen += exthdrlen;
mtu = cork->fragsize;
!exthdrlen)
csummode = CHECKSUM_PARTIAL;
- skb = skb_peek_tail(queue);
-
cork->length += length;
if (((length > mtu) || (skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
static inline void
__ipq_rcv_skb(struct sk_buff *skb)
{
- int status, type, pid, flags, nlmsglen, skblen;
+ int status, type, pid, flags;
+ unsigned int nlmsglen, skblen;
struct nlmsghdr *nlh;
skblen = skb->len;
* error messages (RELATED) and information requests (see below) */
if (ip_hdr(skb)->protocol == IPPROTO_ICMP &&
(ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY))
+ ctinfo == IP_CT_RELATED_REPLY))
return XT_CONTINUE;
/* ip_conntrack_icmp guarantees us that we only have ICMP_ECHO,
ct->mark = hash;
break;
case IP_CT_RELATED:
- case IP_CT_RELATED+IP_CT_IS_REPLY:
+ case IP_CT_RELATED_REPLY:
/* FIXME: we don't handle expectations at the
* moment. they can arrive on a different node than
* the master connection (e.g. FTP passive mode) */
case IP_CT_ESTABLISHED:
- case IP_CT_ESTABLISHED+IP_CT_IS_REPLY:
+ case IP_CT_ESTABLISHED_REPLY:
break;
default:
break;
nat = nfct_nat(ct);
NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+ ctinfo == IP_CT_RELATED_REPLY));
/* Source address is 0.0.0.0 - locally generated packet that is
* probably not supposed to be masqueraded.
/* This is where we call the helper: as the packet goes out. */
ct = nf_ct_get(skb, &ctinfo);
- if (!ct || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY)
+ if (!ct || ctinfo == IP_CT_RELATED_REPLY)
goto out;
help = nfct_help(ct);
/* Update skb to refer to this connection */
skb->nfct = &nf_ct_tuplehash_to_ctrack(h)->ct_general;
skb->nfctinfo = *ctinfo;
- return -NF_ACCEPT;
+ return NF_ACCEPT;
}
/* Small and modified version of icmp_rcv */
/* Must be RELATED */
NF_CT_ASSERT(skb->nfctinfo == IP_CT_RELATED ||
- skb->nfctinfo == IP_CT_RELATED+IP_CT_IS_REPLY);
+ skb->nfctinfo == IP_CT_RELATED_REPLY);
/* Redirects on non-null nats must be dropped, else they'll
start talking to each other without our translation, and be
if (skb->ip_summed != CHECKSUM_PARTIAL) {
if (!(rt->rt_flags & RTCF_LOCAL) &&
- skb->dev->features & NETIF_F_V4_CSUM) {
+ (!skb->dev || skb->dev->features & NETIF_F_V4_CSUM)) {
skb->ip_summed = CHECKSUM_PARTIAL;
skb->csum_start = skb_headroom(skb) +
skb_network_offset(skb) +
/* Connection must be valid and new. */
NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+ ctinfo == IP_CT_RELATED_REPLY));
NF_CT_ASSERT(par->out != NULL);
return nf_nat_setup_info(ct, &mr->range[0], IP_NAT_MANIP_SRC);
switch (ctinfo) {
case IP_CT_RELATED:
- case IP_CT_RELATED+IP_CT_IS_REPLY:
+ case IP_CT_RELATED_REPLY:
if (ip_hdr(skb)->protocol == IPPROTO_ICMP) {
if (!nf_nat_icmp_reply_translation(ct, ctinfo,
hooknum, skb))
default:
/* ESTABLISHED */
NF_CT_ASSERT(ctinfo == IP_CT_ESTABLISHED ||
- ctinfo == (IP_CT_ESTABLISHED+IP_CT_IS_REPLY));
+ ctinfo == IP_CT_ESTABLISHED_REPLY);
}
return nf_nat_packet(ct, ctinfo, hooknum, skb);
;
}
+static bool peer_pmtu_expired(struct inet_peer *peer)
+{
+ unsigned long orig = ACCESS_ONCE(peer->pmtu_expires);
+
+ return orig &&
+ time_after_eq(jiffies, orig) &&
+ cmpxchg(&peer->pmtu_expires, orig, 0) == orig;
+}
+
+static bool peer_pmtu_cleaned(struct inet_peer *peer)
+{
+ unsigned long orig = ACCESS_ONCE(peer->pmtu_expires);
+
+ return orig &&
+ cmpxchg(&peer->pmtu_expires, orig, 0) == orig;
+}
+
static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst)
{
struct rtable *rt = (struct rtable *)dst;
rt_genid(dev_net(dst->dev)));
rt_del(hash, rt);
ret = NULL;
- } else if (rt->peer &&
- rt->peer->pmtu_expires &&
- time_after_eq(jiffies, rt->peer->pmtu_expires)) {
- unsigned long orig = rt->peer->pmtu_expires;
-
- if (cmpxchg(&rt->peer->pmtu_expires, orig, 0) == orig)
- dst_metric_set(dst, RTAX_MTU,
- rt->peer->pmtu_orig);
+ } else if (rt->peer && peer_pmtu_expired(rt->peer)) {
+ dst_metric_set(dst, RTAX_MTU, rt->peer->pmtu_orig);
}
}
return ret;
static void check_peer_pmtu(struct dst_entry *dst, struct inet_peer *peer)
{
- unsigned long expires = peer->pmtu_expires;
+ unsigned long expires = ACCESS_ONCE(peer->pmtu_expires);
+ if (!expires)
+ return;
if (time_before(jiffies, expires)) {
u32 orig_dst_mtu = dst_mtu(dst);
if (peer->pmtu_learned < orig_dst_mtu) {
rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
if (peer) {
+ unsigned long pmtu_expires = ACCESS_ONCE(peer->pmtu_expires);
+
if (mtu < ip_rt_min_pmtu)
mtu = ip_rt_min_pmtu;
- if (!peer->pmtu_expires || mtu < peer->pmtu_learned) {
- unsigned long pmtu_expires;
+ if (!pmtu_expires || mtu < peer->pmtu_learned) {
pmtu_expires = jiffies + ip_rt_mtu_expires;
if (!pmtu_expires)
rt_bind_peer(rt, rt->rt_dst, 0);
peer = rt->peer;
- if (peer && peer->pmtu_expires)
+ if (peer) {
check_peer_pmtu(dst, peer);
- if (peer && peer->redirect_learned.a4 &&
- peer->redirect_learned.a4 != rt->rt_gateway) {
- if (check_peer_redir(dst, peer))
- return NULL;
+ if (peer->redirect_learned.a4 &&
+ peer->redirect_learned.a4 != rt->rt_gateway) {
+ if (check_peer_redir(dst, peer))
+ return NULL;
+ }
}
rt->rt_peer_genid = rt_peer_genid();
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
rt = skb_rtable(skb);
- if (rt &&
- rt->peer &&
- rt->peer->pmtu_expires) {
- unsigned long orig = rt->peer->pmtu_expires;
-
- if (cmpxchg(&rt->peer->pmtu_expires, orig, 0) == orig)
- dst_metric_set(&rt->dst, RTAX_MTU, rt->peer->pmtu_orig);
- }
+ if (rt && rt->peer && peer_pmtu_cleaned(rt->peer))
+ dst_metric_set(&rt->dst, RTAX_MTU, rt->peer->pmtu_orig);
}
static int ip_rt_bug(struct sk_buff *skb)
sizeof(u32) * RTAX_MAX);
dst_init_metrics(&rt->dst, peer->metrics, false);
- if (peer->pmtu_expires)
- check_peer_pmtu(&rt->dst, peer);
+ check_peer_pmtu(&rt->dst, peer);
if (peer->redirect_learned.a4 &&
peer->redirect_learned.a4 != rt->rt_gateway) {
rt->rt_gateway = peer->redirect_learned.a4;
struct rtable *rt = skb_rtable(skb);
struct rtmsg *r;
struct nlmsghdr *nlh;
- long expires;
+ long expires = 0;
+ const struct inet_peer *peer = rt->peer;
u32 id = 0, ts = 0, tsage = 0, error;
nlh = nlmsg_put(skb, pid, seq, event, sizeof(*r), flags);
NLA_PUT_BE32(skb, RTA_MARK, rt->rt_mark);
error = rt->dst.error;
- expires = (rt->peer && rt->peer->pmtu_expires) ?
- rt->peer->pmtu_expires - jiffies : 0;
- if (rt->peer) {
+ if (peer) {
inet_peer_refcheck(rt->peer);
- id = atomic_read(&rt->peer->ip_id_count) & 0xffff;
- if (rt->peer->tcp_ts_stamp) {
- ts = rt->peer->tcp_ts;
- tsage = get_seconds() - rt->peer->tcp_ts_stamp;
+ id = atomic_read(&peer->ip_id_count) & 0xffff;
+ if (peer->tcp_ts_stamp) {
+ ts = peer->tcp_ts;
+ tsage = get_seconds() - peer->tcp_ts_stamp;
}
+ expires = ACCESS_ONCE(peer->pmtu_expires);
+ if (expires)
+ expires -= jiffies;
}
if (rt_is_input_route(rt)) {
if (addr_len < SIN6_LEN_RFC2133)
return -EINVAL;
+
+ if (addr->sin6_family != AF_INET6)
+ return -EINVAL;
+
addr_type = ipv6_addr_type(&addr->sin6_addr);
if ((addr_type & IPV6_ADDR_MULTICAST) && sock->type == SOCK_STREAM)
return -EINVAL;
static inline void
__ipq_rcv_skb(struct sk_buff *skb)
{
- int status, type, pid, flags, nlmsglen, skblen;
+ int status, type, pid, flags;
+ unsigned int nlmsglen, skblen;
struct nlmsghdr *nlh;
skblen = skb->len;
/* This is where we call the helper: as the packet goes out. */
ct = nf_ct_get(skb, &ctinfo);
- if (!ct || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY)
+ if (!ct || ctinfo == IP_CT_RELATED_REPLY)
goto out;
help = nfct_help(ct);
/* Update skb to refer to this connection */
skb->nfct = &nf_ct_tuplehash_to_ctrack(h)->ct_general;
skb->nfctinfo = *ctinfo;
- return -NF_ACCEPT;
+ return NF_ACCEPT;
}
static int
iriap_watchdog_timer_expired);
}
+static struct lock_class_key irias_objects_key;
+
/*
* Function iriap_init (void)
*
return -ENOMEM;
}
+ lockdep_set_class_and_name(&irias_objects->hb_spinlock, &irias_objects_key,
+ "irias_objects");
+
/*
* Register some default services for IrLMP
*/
*/
pd->net = get_net_ns_by_pid(current->pid);
if (IS_ERR(pd->net)) {
- rc = -PTR_ERR(pd->net);
+ rc = PTR_ERR(pd->net);
goto err_free_pd;
}
mutex_lock(&sdata->u.ibss.mtx);
+ sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
+ memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+ sdata->u.ibss.ssid_len = 0;
+
active_ibss = ieee80211_sta_active_ibss(sdata);
if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
kfree_skb(skb);
skb_queue_purge(&sdata->skb_queue);
- memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
- sdata->u.ibss.ssid_len = 0;
del_timer_sync(&sdata->u.ibss.timer);
int tx_headroom; /* required headroom for hardware/radiotap */
- /* count for keys needing tailroom space allocation */
- int crypto_tx_tailroom_needed_cnt;
-
/* Tasklet and skb queue to process calls from IRQ mode. All frames
* added to skb_queue will be processed, but frames in
* skb_queue_unreliable may be dropped if the total length of these
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+ ret = dev_alloc_name(ndev, ndev->name);
+ if (ret < 0)
+ goto fail;
+
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
-
- if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
- (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
- key->local->crypto_tx_tailroom_needed_cnt--;
-
return 0;
}
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
-
- if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
- (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
- key->local->crypto_tx_tailroom_needed_cnt++;
}
void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
ieee80211_aes_key_free(key->u.ccmp.tfm);
if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
- if (key->local) {
+ if (key->local)
ieee80211_debugfs_key_remove(key);
- key->local->crypto_tx_tailroom_needed_cnt--;
- }
kfree(key);
}
ieee80211_debugfs_key_add(key);
- key->local->crypto_tx_tailroom_needed_cnt++;
-
ret = ieee80211_key_enable_hw_accel(key);
mutex_unlock(&sdata->local->key_mtx);
mutex_lock(&sdata->local->key_mtx);
- sdata->local->crypto_tx_tailroom_needed_cnt = 0;
-
- list_for_each_entry(key, &sdata->key_list, list) {
- sdata->local->crypto_tx_tailroom_needed_cnt++;
+ list_for_each_entry(key, &sdata->key_list, list)
ieee80211_key_enable_hw_accel(key);
- }
mutex_unlock(&sdata->local->key_mtx);
}
WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
}
- ieee80211_stop_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
-
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
rcu_read_unlock();
}
- ieee80211_wake_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
-
ht_opmode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
{
int tail_need = 0;
- if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) {
+ /*
+ * This could be optimised, devices that do full hardware
+ * crypto (including TKIP MMIC) need no tailroom... But we
+ * have no drivers for such devices currently.
+ */
+ if (may_encrypt) {
tail_need = IEEE80211_ENCRYPT_TAILROOM;
tail_need -= skb_tailroom(skb);
tail_need = max_t(int, tail_need, 0);
if (!attr[IPSET_ATTR_SETNAME]) {
for (i = 0; i < ip_set_max; i++) {
if (ip_set_list[i] != NULL && ip_set_list[i]->ref) {
- ret = IPSET_ERR_BUSY;
+ ret = -IPSET_ERR_BUSY;
goto out;
}
}
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_ipportnet4_elem data =
- { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_ipportnet4_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_ipportnet6_elem data =
- { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_ipportnet6_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_net4_elem data = { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_net4_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_net6_elem data = { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_net6_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netport4_elem data = {
- .cidr = h->nets[0].cidr || HOST_MASK };
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netport6_elem data = {
- .cidr = h->nets[0].cidr || HOST_MASK };
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 99,
+ .priority = NF_IP_PRI_NAT_SRC - 2,
},
/* After packet filtering, forward packet through VS/DR, VS/TUN,
* or VS/NAT(change destination), so that filtering rules can be
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 101,
+ .priority = NF_IP_PRI_NAT_SRC - 1,
},
/* Before ip_vs_in, change source only for VS/NAT */
{
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -99,
+ .priority = NF_IP_PRI_NAT_DST + 1,
},
/* After mangle, schedule and forward local requests */
{
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -98,
+ .priority = NF_IP_PRI_NAT_DST + 2,
},
/* After packet filtering (but before ip_vs_out_icmp), catch icmp
* destined for 0.0.0.0/0, which is for incoming IPVS connections */
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 99,
+ .priority = NF_IP6_PRI_NAT_SRC - 2,
},
/* After packet filtering, forward packet through VS/DR, VS/TUN,
* or VS/NAT(change destination), so that filtering rules can be
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 101,
+ .priority = NF_IP6_PRI_NAT_SRC - 1,
},
/* Before ip_vs_in, change source only for VS/NAT */
{
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -99,
+ .priority = NF_IP6_PRI_NAT_DST + 1,
},
/* After mangle, schedule and forward local requests */
{
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -98,
+ .priority = NF_IP6_PRI_NAT_DST + 2,
},
/* After packet filtering (but before ip_vs_out_icmp), catch icmp
* destined for 0.0.0.0/0, which is for incoming IPVS connections */
/* It exists; we have (non-exclusive) reference. */
if (NF_CT_DIRECTION(h) == IP_CT_DIR_REPLY) {
- *ctinfo = IP_CT_ESTABLISHED + IP_CT_IS_REPLY;
+ *ctinfo = IP_CT_ESTABLISHED_REPLY;
/* Please set reply bit if this packet OK */
*set_reply = 1;
} else {
ret = -ret;
goto out;
}
+ /* ICMP[v6] protocol trackers may assign one conntrack. */
+ if (skb->nfct)
+ goto out;
}
ct = resolve_normal_ct(net, tmpl, skb, dataoff, pf, protonum,
/* This ICMP is in reverse direction to the packet which caused it */
ct = nf_ct_get(skb, &ctinfo);
if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL)
- ctinfo = IP_CT_RELATED + IP_CT_IS_REPLY;
+ ctinfo = IP_CT_RELATED_REPLY;
else
ctinfo = IP_CT_RELATED;
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ ctinfo != IP_CT_ESTABLISHED_REPLY) {
pr_debug("ftp: Conntrackinfo = %u\n", ctinfo);
return NF_ACCEPT;
}
int ret;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
- }
+
pr_debug("nf_ct_h245: skblen = %u\n", skb->len);
spin_lock_bh(&nf_h323_lock);
int ret;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
- }
+
pr_debug("nf_ct_q931: skblen = %u\n", skb->len);
spin_lock_bh(&nf_h323_lock);
return NF_ACCEPT;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* Not a full tcp header? */
u_int16_t msg;
/* don't do any tracking before tcp handshake complete */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
nexthdr_off = protoff;
ct_sane_info = &nfct_help(ct)->help.ct_sane_info;
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY)
+ ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* Not a full tcp header? */
typeof(nf_nat_sip_seq_adjust_hook) nf_nat_sip_seq_adjust;
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* No Data ? */
ct = nf_ct_get(skb, &ctinfo);
if (ct && !nf_ct_is_untracked(ct) &&
((iph->protocol != IPPROTO_ICMP &&
- ctinfo == IP_CT_IS_REPLY + IP_CT_ESTABLISHED) ||
+ ctinfo == IP_CT_ESTABLISHED_REPLY) ||
(iph->protocol == IPPROTO_ICMP &&
- ctinfo == IP_CT_IS_REPLY + IP_CT_RELATED)) &&
+ ctinfo == IP_CT_RELATED_REPLY)) &&
(ct->status & IPS_SRC_NAT_DONE)) {
daddr = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
} else {
h.h2->tp_vlan_tci = 0;
}
+ h.h2->tp_padding = 0;
hdrlen = sizeof(*h.h2);
break;
default:
} else {
aux.tp_vlan_tci = 0;
}
+ aux.tp_padding = 0;
put_cmsg(msg, SOL_PACKET, PACKET_AUXDATA, sizeof(aux), &aux);
}
}
if (some_queue_timedout) {
- char drivername[64];
WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n",
- dev->name, netdev_drivername(dev, drivername, 64), i);
+ dev->name, netdev_drivername(dev), i);
dev->netdev_ops->ndo_tx_timeout(dev);
}
if (!mod_timer(&dev->watchdog_timer,
i = 0;
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
- request->ssids[i].ssid_len = nla_len(attr);
- if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) {
+ if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
+ request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr));
i++;
}
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
tmp) {
- request->ssids[i].ssid_len = nla_len(attr);
- if (request->ssids[i].ssid_len >
- IEEE80211_MAX_SSID_LEN) {
+ if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
+ request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr),
nla_len(attr));
i++;
bitnr = bitnr & 0x1F;
replay_esn->bmp[nr] |= (1U << bitnr);
} else {
- nr = replay_esn->replay_window >> 5;
+ nr = (replay_esn->replay_window - 1) >> 5;
for (i = 0; i <= nr; i++)
replay_esn->bmp[i] = 0;
bitnr = bitnr & 0x1F;
replay_esn->bmp[nr] |= (1U << bitnr);
} else {
- nr = replay_esn->replay_window >> 5;
+ nr = (replay_esn->replay_window - 1) >> 5;
for (i = 0; i <= nr; i++)
replay_esn->bmp[i] = 0;
WARN("LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr);
}
+# check for uses of printk_ratelimit
+ if ($line =~ /\bprintk_ratelimit\s*\(/) {
+ WARN("Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit\n" . $herecurr);
+ }
+
# printk should use KERN_* levels. Note that follow on printk's on the
# same line do not need a level, so we use the current block context
# to try and find and validate the current printk. In summary the current
#include <linux/audit.h>
#include <linux/uaccess.h>
#include <linux/kobject.h>
+#include <linux/ctype.h>
/* selinuxfs pseudo filesystem for exporting the security policy API.
Based on the proc code and the fs/nfsd/nfsctl.c code. */
return length;
}
+static inline int hexcode_to_int(int code) {
+ if (code == '\0' || !isxdigit(code))
+ return -1;
+ if (isdigit(code))
+ return code - '0';
+ return tolower(code) - 'a' + 10;
+}
+
static ssize_t sel_write_create(struct file *file, char *buf, size_t size)
{
char *scon = NULL, *tcon = NULL;
nargs = sscanf(buf, "%s %s %hu %s", scon, tcon, &tclass, namebuf);
if (nargs < 3 || nargs > 4)
goto out;
- if (nargs == 4)
+ if (nargs == 4) {
+ /*
+ * If and when the name of new object to be queried contains
+ * either whitespace or multibyte characters, they shall be
+ * encoded based on the percentage-encoding rule.
+ * If not encoded, the sscanf logic picks up only left-half
+ * of the supplied name; splitted by a whitespace unexpectedly.
+ */
+ char *r, *w;
+ int c1, c2;
+
+ r = w = namebuf;
+ do {
+ c1 = *r++;
+ if (c1 == '+')
+ c1 = ' ';
+ else if (c1 == '%') {
+ if ((c1 = hexcode_to_int(*r++)) < 0)
+ goto out;
+ if ((c2 = hexcode_to_int(*r++)) < 0)
+ goto out;
+ c1 = (c1 << 4) | c2;
+ }
+ *w++ = c1;
+ } while (c1 != '\0');
+
objname = namebuf;
+ }
length = security_context_to_sid(scon, strlen(scon) + 1, &ssid);
if (length)
__le32 buf[1];
int rc;
+ if (p->policyvers < POLICYDB_VERSION_FILENAME_TRANS)
+ return 0;
+
nel = 0;
rc = hashtab_map(p->filename_trans, hashtab_cnt, &nel);
if (rc)
}
if (need_dev) {
/* Get mount point or device file. */
- if (kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
+ if (!dev_name || kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
error = -ENOENT;
goto out;
}
else
return path;
}
-
-/* print file and line with a certain printk prefix */
-static int print_snd_pfx(unsigned int level, const char *path, int line,
- const char *format)
-{
- const char *file = sanity_file_name(path);
- char tmp[] = "<0>";
- const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
- int ret = 0;
-
- if (format[0] == '<' && format[2] == '>') {
- tmp[1] = format[1];
- pfx = tmp;
- ret = 1;
- }
- printk("%sALSA %s:%d: ", pfx, file, line);
- return ret;
-}
-#else
-#define print_snd_pfx(level, path, line, format) 0
#endif
#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
const char *format, ...)
{
va_list args;
-
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+ struct va_format vaf;
+ char verbose_fmt[] = KERN_DEFAULT "ALSA %s:%d %pV";
+#endif
+
#ifdef CONFIG_SND_DEBUG
if (debug < level)
return;
#endif
+
va_start(args, format);
- if (print_snd_pfx(level, path, line, format))
- format += 3; /* skip the printk level-prefix */
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+ vaf.fmt = format;
+ vaf.va = &args;
+ if (format[0] == '<' && format[2] == '>') {
+ memcpy(verbose_fmt, format, 3);
+ vaf.fmt = format + 3;
+ } else if (level)
+ memcpy(verbose_fmt, KERN_DEBUG, 3);
+ printk(verbose_fmt, sanity_file_name(path), line, &vaf);
+#else
vprintk(format, args);
+#endif
va_end(args);
}
EXPORT_SYMBOL_GPL(__snd_printk);
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO),
SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
+ SND_PCI_QUIRK(0x1b0a, 0x2092, "CyberpowerPC Gamer Xplorer N57001", CXT5066_AUTO),
{}
};
struct alc_spec *spec = codec->spec;
int on;
+ /* Control HP pins/amps depending on master_mute state;
+ * in general, HP pins/amps control should be enabled in all cases,
+ * but currently set only for master_mute, just to be safe
+ */
+ do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
+ spec->autocfg.hp_pins, spec->master_mute, true);
+
if (!spec->automute)
on = 0;
else
/* update HP, line and mono out pins according to the master switch */
static void alc260_hp_master_update(struct hda_codec *codec)
{
- struct alc_spec *spec = codec->spec;
-
- /* change HP pins */
- do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
- spec->autocfg.hp_pins, spec->master_mute, true);
update_speakers(codec);
}
* 0x1b = port replicator headphone out
*/
-#define ALC_HP_EVENT 0x37
+#define ALC_HP_EVENT ALC880_HP_EVENT
static const struct hda_verb alc262_fujitsu_unsol_verbs[] = {
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
ALC268_ACER_ASPIRE_ONE),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
+ SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO),
SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
"Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
/* almost compatible with toshiba but with optional digital outs;
if (IS_ERR(ssc))
pr_warn("Unable to parent ASoC SSC DAI on SSC: %ld\n",
PTR_ERR(ssc));
- else
+ else {
ssc_pdev->dev.parent = &(ssc->pdev->dev);
- ssc_free(ssc);
+ ssc_free(ssc);
+ }
ret = platform_device_add(ssc_pdev);
if (ret < 0)
.cpu_dai_name = "bfin-tdm.0",
.codec_dai_name = "ad1836-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad1836.0",
+ .codec_name = "spi0.4",
.ops = &bf5xx_ad1836_ops,
},
{
.cpu_dai_name = "bfin-tdm.1",
.codec_dai_name = "ad1836-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad1836.0",
+ .codec_name = "spi0.4",
.ops = &bf5xx_ad1836_ops,
},
};
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
- word_len = 3;
+ word_len = AD1836_WORD_LEN_16;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- word_len = 1;
+ word_len = AD1836_WORD_LEN_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
case SNDRV_PCM_FORMAT_S32_LE:
- word_len = 0;
+ word_len = AD1836_WORD_LEN_24;
break;
}
- snd_soc_update_bits(codec, AD1836_DAC_CTRL1,
- AD1836_DAC_WORD_LEN_MASK, word_len);
+ snd_soc_update_bits(codec, AD1836_DAC_CTRL1, AD1836_DAC_WORD_LEN_MASK,
+ word_len << AD1836_DAC_WORD_LEN_OFFSET);
- snd_soc_update_bits(codec, AD1836_ADC_CTRL2,
- AD1836_ADC_WORD_LEN_MASK, word_len);
+ snd_soc_update_bits(codec, AD1836_ADC_CTRL2, AD1836_ADC_WORD_LEN_MASK,
+ word_len << AD1836_ADC_WORD_OFFSET);
return 0;
}
#define AD1836_DAC_SERFMT_PCK256 (0x4 << 5)
#define AD1836_DAC_SERFMT_PCK128 (0x5 << 5)
#define AD1836_DAC_WORD_LEN_MASK 0x18
+#define AD1836_DAC_WORD_LEN_OFFSET 3
#define AD1836_DAC_CTRL2 1
#define AD1836_DACL1_MUTE 0
#define AD1836_ADCL2_MUTE 2
#define AD1836_ADCR2_MUTE 3
#define AD1836_ADC_WORD_LEN_MASK 0x30
+#define AD1836_ADC_WORD_OFFSET 5
#define AD1836_ADC_SERFMT_MASK (7 << 6)
#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
#define AD1836_NUM_REGS 16
+#define AD1836_WORD_LEN_24 0x0
+#define AD1836_WORD_LEN_20 0x1
+#define AD1836_WORD_LEN_16 0x2
+
#endif
#define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
+#define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
static struct snd_soc_dai_driver wm8804_dai = {
.name = "wm8804-spdif",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.ops = &wm8804_dai_ops,
int old;
/* Disable SYSCLK while we reconfigure */
- old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1);
+ old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1) & WM8915_SYSCLK_ENA;
snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1,
WM8915_SYSCLK_ENA, 0);
break;
case WM8915_FLL_MCLK2:
reg = 1;
+ break;
case WM8915_FLL_DACLRCLK1:
reg = 2;
break;
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_HPOUTL_PGA_ENA)
+ if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
reg_cache[WM8962_HPOUTL_VOLUME]);
/* ...otherwise the right. The VU is stereo. */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_HPOUTR_PGA_ENA)
+ if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
reg_cache[WM8962_HPOUTR_VOLUME]);
* should allocate a DMA buffer only for the streams that are valid.
*/
- if (dai->driver->playback.channels_min) {
+ if (pcm->streams[0].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[0].substream->dma_buffer);
}
}
- if (dai->driver->capture.channels_min) {
+ if (pcm->streams[1].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[1].substream->dma_buffer);
if (ret) {
- snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
dev_err(card->dev, "can't alloc capture dma buffer\n");
+ snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
return ret;
}
}
dma_private->ld_buf_phys = ld_buf_phys;
dma_private->dma_buf_phys = substream->dma_buffer.addr;
- ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "DMA", dma_private);
+ ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "fsldma-audio",
+ dma_private);
if (ret) {
dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
dma_private->irq, ret);
if (!i2s)
return false;
- active = readl(i2s->addr + I2SMOD);
+ active = readl(i2s->addr + I2SCON);
if (is_secondary(i2s))
active &= CON_TXSDMA_ACTIVE;
if (!i2s)
return false;
- active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE;
+ active = readl(i2s->addr + I2SCON) & CON_RXDMA_ACTIVE;
return active ? true : false;
}
static unsigned int snd_soc_get_cache_val(const void *base, unsigned int idx,
unsigned int word_size)
{
+ if (!base)
+ return -1;
+
switch (word_size) {
case 1: {
const u8 *cache = base;
}
/* create new dapm mixer control */
-static int dapm_new_mixer(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_mixer(struct snd_soc_dapm_widget *w)
{
+ struct snd_soc_dapm_context *dapm = w->dapm;
int i, ret = 0;
size_t name_len, prefix_len;
struct snd_soc_dapm_path *path;
}
/* create new dapm mux control */
-static int dapm_new_mux(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_mux(struct snd_soc_dapm_widget *w)
{
+ struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_dapm_path *path = NULL;
struct snd_kcontrol *kcontrol;
struct snd_card *card = dapm->card->snd_card;
}
/* create new dapm volume control */
-static int dapm_new_pga(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_pga(struct snd_soc_dapm_widget *w)
{
if (w->num_kcontrols)
dev_err(w->dapm->dev,
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
w->power_check = dapm_generic_check_power;
- dapm_new_mixer(dapm, w);
+ dapm_new_mixer(w);
break;
case snd_soc_dapm_mux:
case snd_soc_dapm_virt_mux:
case snd_soc_dapm_value_mux:
w->power_check = dapm_generic_check_power;
- dapm_new_mux(dapm, w);
+ dapm_new_mux(w);
break;
case snd_soc_dapm_adc:
case snd_soc_dapm_aif_out:
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
w->power_check = dapm_generic_check_power;
- dapm_new_pga(dapm, w);
+ dapm_new_pga(w);
break;
case snd_soc_dapm_input:
case snd_soc_dapm_output:
projects / firefly-linux-kernel-4.4.55.git / commitdiff