Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt

Since now we have a separate folder for phy, move the PHY dt binding
documentation of TI to that folder.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
new file mode 100644 (file)
index 0000000..207e14c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -0,0 +1,48 @@
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
+
+OMAP USB2 PHY
+
+Required properties:
+ - compatible: Should be "ti,omap-usb2"
+ - reg : Address and length of the register set for the device.
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+
+Optional properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb2phy@4a0ad080 {
+       compatible = "ti,omap-usb2";
+       reg = <0x4a0ad080 0x58>;
+       ctrl-module = <&omap_control_usb>;
+       #phy-cells = <0>;
+};
+
+TI PIPE3 PHY
+
+Required properties:
+ - compatible: Should be "ti,phy-usb3". "ti,omap-usb3" is deprecated.
+ - reg : Address and length of the register set for the device.
+ - reg-names: The names of the register addresses corresponding to the registers
+   filled in "reg".
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+
+Optional properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb3phy@4a084400 {
+       compatible = "ti,phy-usb3";
+       reg = <0x4a084400 0x80>,
+             <0x4a084800 0x64>,
+             <0x4a084c00 0x40>;
+       reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+       ctrl-module = <&omap_control_usb>;
+       #phy-cells = <0>;
+};

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
deleted file mode 100644 (file)
index c0245c8..0000000
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-USB PHY
-
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
-
-Optional properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
-       compatible = "ti,omap-usb2";
-       reg = <0x4a0ad080 0x58>;
-       ctrl-module = <&omap_control_usb>;
-       #phy-cells = <0>;
-};
-
-OMAP USB3 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb3"
- - reg : Address and length of the register set for the device.
- - reg-names: The names of the register addresses corresponding to the registers
-   filled in "reg".
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
-
-Optional properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb3phy@4a084400 {
-       compatible = "ti,omap-usb3";
-       reg = <0x4a084400 0x80>,
-             <0x4a084800 0x64>,
-             <0x4a084c00 0x40>;
-       reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-       ctrl-module = <&omap_control_usb>;
-       #phy-cells = <0>;
-};