drm/i915: Use atomic helpers for computing changed flags

Replace the drivers own logic for computing mode_changed, active_changed
and planes_changed flags with the check_modeset() atomic helper. Since
that function needs to compare the crtc's new mode with the current,
this patch also moves the set up of crtc_state->mode earlier in the call
chain.

Note that for the call to check_plane() to work properly, we need to
check new plane state against new crtc state. But since we still use the
plane update helper, which doesn't have a full atomic state, we need to
hack around that in intel_plane_atomic_check().

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
index 77462e1360bc4aa2e1c6ac6f1af0f88dba3004d4..86ba4b2c3a651e982a266a242c9a410f40e04a05 100644 (file)
--- a/drivers/gpu/drm/i915/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
@@ -111,6 +111,7 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
 {
        struct drm_crtc *crtc = state->crtc;
        struct intel_crtc *intel_crtc;
+       struct intel_crtc_state *crtc_state;
        struct intel_plane *intel_plane = to_intel_plane(plane);
        struct intel_plane_state *intel_state = to_intel_plane_state(state);
 
@@ -126,6 +127,17 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
        if (!crtc)
                return 0;
 
+       /* FIXME: temporary hack necessary while we still use the plane update
+        * helper. */
+       if (state->state) {
+               crtc_state =
+                       intel_atomic_get_crtc_state(state->state, intel_crtc);
+               if (IS_ERR(crtc_state))
+                       return PTR_ERR(crtc_state);
+       } else {
+               crtc_state = intel_crtc->config;
+       }
+
        /*
         * The original src/dest coordinates are stored in state->base, but
         * we want to keep another copy internal to our driver that we can
@@ -144,9 +156,9 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
        intel_state->clip.x1 = 0;
        intel_state->clip.y1 = 0;
        intel_state->clip.x2 =
-               intel_crtc->active ? intel_crtc->config->pipe_src_w : 0;
+               crtc_state->base.active ? crtc_state->pipe_src_w : 0;
        intel_state->clip.y2 =
-               intel_crtc->active ? intel_crtc->config->pipe_src_h : 0;
+               crtc_state->base.active ? crtc_state->pipe_src_h : 0;
 
        /*
         * Disabling a plane is always okay; we just need to update

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 44b3b5a7ad34305938a150589873a4d7364580f6..db450772b4a52f135c126a2bf5e5a466506ead41 100644 (file)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -82,7 +82,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
                                   struct intel_crtc_state *pipe_config);
 
-static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
+static int intel_set_mode(struct drm_crtc *crtc,
                          struct drm_atomic_state *state);
 static int intel_framebuffer_init(struct drm_device *dev,
                                  struct intel_framebuffer *ifb,
@@ -9892,7 +9892,9 @@ retry:
        if (ret)
                goto fail;
 
-       if (intel_set_mode(crtc, mode, state)) {
+       drm_mode_copy(&crtc_state->base.mode, mode);
+
+       if (intel_set_mode(crtc, state)) {
                DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
                if (old->release_fb)
                        old->release_fb->funcs->destroy(old->release_fb);
@@ -9966,7 +9968,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
                if (ret)
                        goto fail;
 
-               intel_set_mode(crtc, NULL, state);
+               intel_set_mode(crtc, state);
 
                drm_atomic_state_free(state);
 
@@ -11476,7 +11478,6 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
 
 static int
 intel_modeset_pipe_config(struct drm_crtc *crtc,
-                         struct drm_display_mode *mode,
                          struct drm_atomic_state *state,
                          struct intel_crtc_state *pipe_config)
 {
@@ -11499,10 +11500,6 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 
        clear_intel_crtc_state(pipe_config);
 
-       pipe_config->base.crtc = crtc;
-       drm_mode_copy(&pipe_config->base.adjusted_mode, mode);
-       drm_mode_copy(&pipe_config->base.mode, mode);
-
        pipe_config->cpu_transcoder =
                (enum transcoder) to_intel_crtc(crtc)->pipe;
        pipe_config->shared_dpll = DPLL_ID_PRIVATE;
@@ -12199,27 +12196,8 @@ static void update_scanline_offset(struct intel_crtc *crtc)
                crtc->scanline_offset = 1;
 }
 
-static void
-intel_atomic_modeset_compute_changed_flags(struct drm_atomic_state *state,
-                                          struct drm_crtc *modeset_crtc)
-{
-       struct drm_crtc_state *crtc_state;
-       struct drm_crtc *crtc;
-       int i;
-
-       for_each_crtc_in_state(state, crtc, crtc_state, i) {
-               if (crtc_state->enable != crtc->state->enable)
-                       crtc_state->mode_changed = true;
-
-               /* FIXME: Do we need to always set mode_changed for
-                * modeset_crtc if it is enabled? modeset_affect_pipes()
-                * did that. */
-       }
-}
-
 static struct intel_crtc_state *
 intel_modeset_compute_config(struct drm_crtc *crtc,
-                            struct drm_display_mode *mode,
                             struct drm_atomic_state *state)
 {
        struct intel_crtc_state *pipe_config;
@@ -12229,7 +12207,9 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
        if (ret)
                return ERR_PTR(ret);
 
-       intel_atomic_modeset_compute_changed_flags(state, crtc);
+       ret = drm_atomic_helper_check_modeset(state->dev, state);
+       if (ret)
+               return ERR_PTR(ret);
 
        /*
         * Note this needs changes when we start tracking multiple modes
@@ -12244,7 +12224,7 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
        if (!pipe_config->base.enable)
                return pipe_config;
 
-       ret = intel_modeset_pipe_config(crtc, mode, state, pipe_config);
+       ret = intel_modeset_pipe_config(crtc, state, pipe_config);
        if (ret)
                return ERR_PTR(ret);
 
@@ -12262,6 +12242,10 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
 
        intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
 
+       ret = drm_atomic_helper_check_planes(state->dev, state);
+       if (ret)
+               return ERR_PTR(ret);
+
        return pipe_config;
 }
 
@@ -12337,7 +12321,6 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 }
 
 static int __intel_set_mode(struct drm_crtc *modeset_crtc,
-                           struct drm_display_mode *mode,
                            struct intel_crtc_state *pipe_config)
 {
        struct drm_device *dev = modeset_crtc->dev;
@@ -12380,7 +12363,7 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
         * single crtc and mode.
         */
        if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
-               modeset_crtc->mode = *mode;
+               modeset_crtc->mode = pipe_config->base.mode;
                /* mode_set/enable/disable functions rely on a correct pipe
                 * config. */
                intel_crtc_set_state(to_intel_crtc(modeset_crtc), pipe_config);
@@ -12446,12 +12429,11 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
 }
 
 static int intel_set_mode_with_config(struct drm_crtc *crtc,
-                                     struct drm_display_mode *mode,
                                      struct intel_crtc_state *pipe_config)
 {
        int ret;
 
-       ret = __intel_set_mode(crtc, mode, pipe_config);
+       ret = __intel_set_mode(crtc, pipe_config);
 
        if (ret == 0)
                intel_modeset_check_state(crtc->dev);
@@ -12460,19 +12442,18 @@ static int intel_set_mode_with_config(struct drm_crtc *crtc,
 }
 
 static int intel_set_mode(struct drm_crtc *crtc,
-                         struct drm_display_mode *mode,
                          struct drm_atomic_state *state)
 {
        struct intel_crtc_state *pipe_config;
        int ret = 0;
 
-       pipe_config = intel_modeset_compute_config(crtc, mode, state);
+       pipe_config = intel_modeset_compute_config(crtc, state);
        if (IS_ERR(pipe_config)) {
                ret = PTR_ERR(pipe_config);
                goto out;
        }
 
-       ret = intel_set_mode_with_config(crtc, mode, pipe_config);
+       ret = intel_set_mode_with_config(crtc, pipe_config);
        if (ret)
                goto out;
 
@@ -12539,125 +12520,21 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
                }
 
                crtc_state->base.enable = intel_crtc->new_enabled;
+
+               if (&intel_crtc->base == crtc)
+                       drm_mode_copy(&crtc_state->base.mode, &crtc->mode);
        }
 
        intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
                                        crtc->primary->fb, crtc->x, crtc->y);
 
-       intel_set_mode(crtc, &crtc->mode, state);
+       intel_set_mode(crtc, state);
 
        drm_atomic_state_free(state);
 }
 
 #undef for_each_intel_crtc_masked
 
-static bool
-is_crtc_connector_off(struct drm_mode_set *set)
-{
-       int i;
-
-       if (set->num_connectors == 0)
-               return false;
-
-       if (WARN_ON(set->connectors == NULL))
-               return false;
-
-       for (i = 0; i < set->num_connectors; i++)
-               if (set->connectors[i]->encoder &&
-                   set->connectors[i]->encoder->crtc == set->crtc &&
-                   set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
-                       return true;
-
-       return false;
-}
-
-static void
-intel_set_config_compute_mode_changes(struct drm_mode_set *set,
-                                     struct intel_crtc_state *pipe_config)
-{
-       struct drm_atomic_state *state;
-       struct drm_connector *connector;
-       struct drm_connector_state *connector_state;
-       struct drm_crtc *crtc;
-       struct drm_crtc_state *crtc_state;
-       int i;
-
-       /* We should be able to check here if the fb has the same properties
-        * and then just flip_or_move it */
-       if (is_crtc_connector_off(set)) {
-               pipe_config->base.mode_changed = true;
-       } else if (set->crtc->primary->fb != set->fb) {
-               /*
-                * If we have no fb, we can only flip as long as the crtc is
-                * active, otherwise we need a full mode set.  The crtc may
-                * be active if we've only disabled the primary plane, or
-                * in fastboot situations.
-                */
-               if (set->crtc->primary->fb == NULL) {
-                       struct intel_crtc *intel_crtc =
-                               to_intel_crtc(set->crtc);
-
-                       if (intel_crtc->active) {
-                               DRM_DEBUG_KMS("crtc has no fb, will flip\n");
-                               pipe_config->base.planes_changed = true;
-                       } else {
-                               DRM_DEBUG_KMS("inactive crtc, full mode set\n");
-                               pipe_config->base.mode_changed = true;
-                       }
-               } else if (set->fb == NULL) {
-                       pipe_config->base.mode_changed = true;
-               } else if (set->fb->pixel_format !=
-                          set->crtc->primary->fb->pixel_format) {
-                       pipe_config->base.mode_changed = true;
-               } else {
-                       pipe_config->base.planes_changed = true;
-               }
-       }
-
-       if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
-               pipe_config->base.planes_changed = true;
-
-       if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
-               DRM_DEBUG_KMS("modes are different, full mode set\n");
-               drm_mode_debug_printmodeline(&set->crtc->mode);
-               drm_mode_debug_printmodeline(set->mode);
-               pipe_config->base.mode_changed = true;
-       }
-
-       state = pipe_config->base.state;
-
-       for_each_connector_in_state(state, connector, connector_state, i) {
-               if (connector_state->best_encoder !=
-                   connector->state->best_encoder) {
-                       DRM_DEBUG_KMS("[CONNECTOR:%d:%s] encoder changed, full mode switch\n",
-                                     connector->base.id,
-                                     connector->name);
-                       pipe_config->base.mode_changed = true;
-               }
-
-               if (connector_state->crtc != connector->state->crtc) {
-                       DRM_DEBUG_KMS("[CONNECTOR:%d:%s] crtc changed, full mode switch\n",
-                                     connector->base.id,
-                                     connector->name);
-                       pipe_config->base.mode_changed = true;
-               }
-       }
-
-       for_each_crtc_in_state(state, crtc, crtc_state, i) {
-               if (crtc_state->enable == crtc->state->enable)
-                       continue;
-
-               DRM_DEBUG_KMS("[CRTC:%d] %sabled, full mode switch\n",
-                             crtc->base.id,
-                             crtc_state->enable ? "en" : "dis");
-               pipe_config->base.mode_changed = true;
-       }
-
-       DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
-                       set->crtc->base.id, pipe_config->base.mode_changed,
-                       pipe_config->base.planes_changed);
-}
-
 static bool intel_connector_in_mode_set(struct intel_connector *connector,
                                        struct drm_mode_set *set)
 {
@@ -12774,6 +12651,21 @@ intel_modeset_stage_output_state(struct drm_device *dev,
                crtc_state->enable = drm_atomic_connectors_for_crtc(state, crtc);
        }
 
+       ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
+                                             set->fb, set->x, set->y);
+       if (ret)
+               return ret;
+
+       crtc_state = drm_atomic_get_crtc_state(state, set->crtc);
+       if (IS_ERR(crtc_state))
+               return PTR_ERR(crtc_state);
+
+       if (set->mode)
+               drm_mode_copy(&crtc_state->mode, set->mode);
+
+       if (set->num_connectors)
+               crtc_state->active = true;
+
        return 0;
 }
 
@@ -12821,30 +12713,17 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
        if (ret)
                goto out;
 
-       ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
-                                             set->fb, set->x, set->y);
-       if (ret)
-               goto out;
-
-       pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
-                                                  state);
+       pipe_config = intel_modeset_compute_config(set->crtc, state);
        if (IS_ERR(pipe_config)) {
                ret = PTR_ERR(pipe_config);
                goto out;
        }
 
-       /* Compute whether we need a full modeset, only an fb base update or no
-        * change at all. In the future we might also check whether only the
-        * mode changed, e.g. for LVDS where we only change the panel fitter in
-        * such cases. */
-       intel_set_config_compute_mode_changes(set, pipe_config);
-
        intel_update_pipe_size(to_intel_crtc(set->crtc));
 
        primary_plane_was_visible = primary_plane_visible(set->crtc);
 
-       ret = intel_set_mode_with_config(set->crtc, set->mode,
-                                        pipe_config);
+       ret = intel_set_mode_with_config(set->crtc, pipe_config);
 
        if (ret == 0 &&
            pipe_config->base.enable &&