tg3: Add SGMII phy support for 5719/5718 serdes
authorMichael Chan <mchan@broadcom.com>
Tue, 9 Apr 2013 08:48:06 +0000 (08:48 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 9 Apr 2013 19:14:14 +0000 (15:14 -0400)
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/tg3.c
drivers/net/ethernet/broadcom/tg3.h

index 568dd07fc0524b6569782de92d834149765901ab..f53e3094f0ddacfbcaac35788a43319d350d429a 100644 (file)
@@ -5465,11 +5465,50 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 
 static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
 {
-       int current_link_up, err = 0;
+       int current_link_up = 0, err = 0;
        u32 bmsr, bmcr;
-       u16 current_speed;
-       u8 current_duplex;
-       u32 local_adv, remote_adv;
+       u16 current_speed = SPEED_UNKNOWN;
+       u8 current_duplex = DUPLEX_UNKNOWN;
+       u32 local_adv, remote_adv, sgsr;
+
+       if ((tg3_asic_rev(tp) == ASIC_REV_5719 ||
+            tg3_asic_rev(tp) == ASIC_REV_5720) &&
+            !tg3_readphy(tp, SERDES_TG3_1000X_STATUS, &sgsr) &&
+            (sgsr & SERDES_TG3_SGMII_MODE)) {
+
+               if (force_reset)
+                       tg3_phy_reset(tp);
+
+               tp->mac_mode &= ~MAC_MODE_PORT_MODE_MASK;
+
+               if (!(sgsr & SERDES_TG3_LINK_UP)) {
+                       tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+               } else {
+                       current_link_up = 1;
+                       if (sgsr & SERDES_TG3_SPEED_1000) {
+                               current_speed = SPEED_1000;
+                               tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+                       } else if (sgsr & SERDES_TG3_SPEED_100) {
+                               current_speed = SPEED_100;
+                               tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
+                       } else {
+                               current_speed = SPEED_10;
+                               tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
+                       }
+
+                       if (sgsr & SERDES_TG3_FULL_DUPLEX)
+                               current_duplex = DUPLEX_FULL;
+                       else
+                               current_duplex = DUPLEX_HALF;
+               }
+
+               tw32_f(MAC_MODE, tp->mac_mode);
+               udelay(40);
+
+               tg3_clear_mac_status(tp);
+
+               goto fiber_setup_done;
+       }
 
        tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
        tw32_f(MAC_MODE, tp->mac_mode);
@@ -5480,9 +5519,6 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
        if (force_reset)
                tg3_phy_reset(tp);
 
-       current_link_up = 0;
-       current_speed = SPEED_UNKNOWN;
-       current_duplex = DUPLEX_UNKNOWN;
        tp->link_config.rmt_adv = 0;
 
        err |= tg3_readphy(tp, MII_BMSR, &bmsr);
@@ -5600,6 +5636,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
                }
        }
 
+fiber_setup_done:
        if (current_link_up == 1 && current_duplex == DUPLEX_FULL)
                tg3_setup_flow_control(tp, local_adv, remote_adv);
 
index 1cdc1b641c774bbee440b03d03146f5f052d65ec..fd00a38b7ab07f2101d4e8b639187125648bc8f8 100644 (file)
 #define MII_TG3_FET_SHDW_AUXSTAT2      0x1b
 #define  MII_TG3_FET_SHDW_AUXSTAT2_APD 0x0020
 
+/* Serdes PHY Register Definitions */
+#define SERDES_TG3_1000X_STATUS                0x14
+#define  SERDES_TG3_SGMII_MODE          0x0001
+#define  SERDES_TG3_LINK_UP             0x0002
+#define  SERDES_TG3_FULL_DUPLEX                 0x0004
+#define  SERDES_TG3_SPEED_100           0x0008
+#define  SERDES_TG3_SPEED_1000          0x0010
 
 /* APE registers.  Accessible through BAR1 */
 #define TG3_APE_GPIO_MSG               0x0008