scsi: ufs-qcom: don't enable interrupt aggregation
authorYaniv Gardi <ygardi@codeaurora.org>
Sun, 17 May 2015 15:54:58 +0000 (18:54 +0300)
committerJames Bottomley <JBottomley@Odin.com>
Tue, 2 Jun 2015 20:13:48 +0000 (13:13 -0700)
Current versions of UFS host controllers on QUALCOMM Technologies
have interrupt aggregation logic broken.
Interrupt aggregation may not work if both threshold count and timeout
is enabled. Hence disable interrupt aggregation by enabling
UFSHCD_QUIRK_BROKEN_INTR_AGGR quirk until its fixed in the newer
UFS host controller revisions.

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
drivers/scsi/ufs/ufs-qcom.c

index 6652a8171de60c41e07299559d3e993cb3d5163e..e8dc050543cdc3da1f628c2a349aac3e6b5dade0 100644 (file)
@@ -307,6 +307,7 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
 static unsigned long
 ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
 {
+       struct ufs_qcom_host *host = hba->priv;
        struct ufs_clk_info *clki;
        u32 core_clk_period_in_ns;
        u32 tx_clk_cycles_per_us = 0;
@@ -330,6 +331,16 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
                {UFS_HS_G2, 0x49},
        };
 
+       /*
+        * The Qunipro controller does not use following registers:
+        * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
+        * UFS_REG_PA_LINK_STARTUP_TIMER
+        * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
+        * Aggregation logic.
+       */
+       if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
+               goto out;
+
        if (gear == 0) {
                dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
                goto out_error;
@@ -696,9 +707,13 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 {
        struct ufs_qcom_host *host = hba->priv;
 
-       if (host->hw_ver.major == 0x1)
+       if (host->hw_ver.major == 0x01) {
                hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS;
 
+               if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
+                       hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
+       }
+
        if (host->hw_ver.major >= 0x2) {
                if (!ufs_qcom_cap_qunipro(host))
                        /* Legacy UniPro mode still need following quirks */