#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/sched.h>
#include <asm/uaccess.h>
#include "pmcc4_sysdep.h"
#include "pmcc4_private.h"
#include "sbeproc.h"
-/* forwards */
-void sbecom_get_brdinfo (ci_t *, struct sbe_brd_info *, u_int8_t *);
+extern void sbecom_get_brdinfo(ci_t *, struct sbe_brd_info *, u_int8_t *);
extern struct s_hdw_info hdw_info[MAX_BOARDS];
-#ifdef CONFIG_PROC_FS
-
-/********************************************************************/
-/* procfs stuff */
-/********************************************************************/
-
-
-void
-sbecom_proc_brd_cleanup (ci_t * ci)
+void sbecom_proc_brd_cleanup(ci_t *ci)
{
- if (ci->dir_dev)
- {
- char dir[7 + SBE_IFACETMPL_SIZE + 1];
- snprintf(dir, sizeof(dir), "driver/%s", ci->devname);
- remove_proc_entry("info", ci->dir_dev);
- remove_proc_entry(dir, NULL);
- ci->dir_dev = NULL;
- }
+ if (ci->dir_dev) {
+ char dir[7 + SBE_IFACETMPL_SIZE + 1];
+ snprintf(dir, sizeof(dir), "driver/%s", ci->devname);
+ remove_proc_entry("info", ci->dir_dev);
+ remove_proc_entry(dir, NULL);
+ ci->dir_dev = NULL;
+ }
}
-
-static int
-sbecom_proc_get_sbe_info (char *buffer, char **start, off_t offset,
- int length, int *eof, void *priv)
+static void sbecom_proc_get_brdinfo(ci_t *ci, struct sbe_brd_info *bip)
{
- ci_t *ci = (ci_t *) priv;
- int len = 0;
- char *spd;
- struct sbe_brd_info *bip;
-
- if (!(bip = OS_kmalloc (sizeof (struct sbe_brd_info))))
- {
- return -ENOMEM;
- }
-#if 0
- /** RLD DEBUG **/
- pr_info(">> sbecom_proc_get_sbe_info: entered, offset %d. length %d.\n",
- (int) offset, (int) length);
-#endif
-
- {
- hdw_info_t *hi = &hdw_info[ci->brdno];
-
- u_int8_t *bsn = 0;
-
- switch (hi->promfmt)
- {
- case PROM_FORMAT_TYPE1:
- bsn = (u_int8_t *) hi->mfg_info.pft1.Serial;
- break;
- case PROM_FORMAT_TYPE2:
- bsn = (u_int8_t *) hi->mfg_info.pft2.Serial;
- break;
- }
-
- sbecom_get_brdinfo (ci, bip, bsn);
- }
-
-#if 0
- /** RLD DEBUG **/
- pr_info(">> sbecom_get_brdinfo: returned, first_if %p <%s> last_if %p <%s>\n",
- (char *) &bip->first_iname, (char *) &bip->first_iname,
- (char *) &bip->last_iname, (char *) &bip->last_iname);
-#endif
- len += sprintf (buffer + len, "Board Type: ");
- switch (bip->brd_id)
- {
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C1T3):
- len += sprintf (buffer + len, "wanPMC-C1T3");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPTMC_256T3_E1):
- len += sprintf (buffer + len, "wanPTMC-256T3 <E1>");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPTMC_256T3_T1):
- len += sprintf (buffer + len, "wanPTMC-256T3 <T1>");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPTMC_C24TE1):
- len += sprintf (buffer + len, "wanPTMC-C24TE1");
- break;
-
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C4T1E1):
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C4T1E1_L):
- len += sprintf (buffer + len, "wanPMC-C4T1E1");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C2T1E1):
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C2T1E1_L):
- len += sprintf (buffer + len, "wanPMC-C2T1E1");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C1T1E1):
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C1T1E1_L):
- len += sprintf (buffer + len, "wanPMC-C1T1E1");
- break;
-
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPCI_C4T1E1):
- len += sprintf (buffer + len, "wanPCI-C4T1E1");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPCI_C2T1E1):
- len += sprintf (buffer + len, "wanPCI-C2T1E1");
- break;
- case SBE_BOARD_ID (PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPCI_C1T1E1):
- len += sprintf (buffer + len, "wanPCI-C1T1E1");
- break;
-
- default:
- len += sprintf (buffer + len, "unknown");
- break;
- }
- len += sprintf (buffer + len, " [%08X]\n", bip->brd_id);
+ hdw_info_t *hi = &hdw_info[ci->brdno];
+ u_int8_t *bsn = 0;
+
+ switch (hi->promfmt)
+ {
+ case PROM_FORMAT_TYPE1:
+ bsn = (u_int8_t *) hi->mfg_info.pft1.Serial;
+ break;
+ case PROM_FORMAT_TYPE2:
+ bsn = (u_int8_t *) hi->mfg_info.pft2.Serial;
+ break;
+ }
+
+ sbecom_get_brdinfo (ci, bip, bsn);
+
+ pr_devel(">> sbecom_get_brdinfo: returned, first_if %p <%s> last_if %p <%s>\n",
+ bip->first_iname, bip->first_iname,
+ bip->last_iname, bip->last_iname);
+}
- len += sprintf (buffer + len, "Board Number: %d\n", bip->brdno);
- len += sprintf (buffer + len, "Hardware ID: 0x%02X\n", ci->hdw_bid);
- len += sprintf (buffer + len, "Board SN: %06X\n", bip->brd_sn);
- len += sprintf(buffer + len, "Board MAC: %pMF\n",
- bip->brd_mac_addr);
- len += sprintf (buffer + len, "Ports: %d\n", ci->max_port);
- len += sprintf (buffer + len, "Channels: %d\n", bip->brd_chan_cnt);
+/*
+ * Describe the driver state through /proc
+ */
+static int sbecom_proc_get_sbe_info(struct seq_file *m, void *v)
+{
+ ci_t *ci = m->private;
+ char *spd;
+ struct sbe_brd_info *bip;
+
+ if (!(bip = OS_kmalloc(sizeof(struct sbe_brd_info))))
+ return -ENOMEM;
+
+ pr_devel(">> sbecom_proc_get_sbe_info: entered\n");
+
+ sbecom_proc_get_brdinfo(ci, bip);
+
+ seq_puts(m, "Board Type: ");
+ switch (bip->brd_id) {
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C1T3):
+ seq_puts(m, "wanPMC-C1T3");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPTMC_256T3_E1):
+ seq_puts(m, "wanPTMC-256T3 <E1>");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPTMC_256T3_T1):
+ seq_puts(m, "wanPTMC-256T3 <T1>");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPTMC_C24TE1):
+ seq_puts(m, "wanPTMC-C24TE1");
+ break;
+
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C4T1E1):
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C4T1E1_L):
+ seq_puts(m, "wanPMC-C4T1E1");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C2T1E1):
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C2T1E1_L):
+ seq_puts(m, "wanPMC-C2T1E1");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C1T1E1):
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPMC_C1T1E1_L):
+ seq_puts(m, "wanPMC-C1T1E1");
+ break;
+
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPCI_C4T1E1):
+ seq_puts(m, "wanPCI-C4T1E1");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPCI_C2T1E1):
+ seq_puts(m, "wanPCI-C2T1E1");
+ break;
+ case SBE_BOARD_ID(PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_WANPCI_C1T1E1):
+ seq_puts(m, "wanPCI-C1T1E1");
+ break;
+
+ default:
+ seq_puts(m, "unknown");
+ break;
+ }
+
+ seq_printf(m, " [%08X]\n", bip->brd_id);
+
+ seq_printf(m, "Board Number: %d\n", bip->brdno);
+ seq_printf(m, "Hardware ID: 0x%02X\n", ci->hdw_bid);
+ seq_printf(m, "Board SN: %06X\n", bip->brd_sn);
+ seq_printf(m, "Board MAC: %pMF\n", bip->brd_mac_addr);
+ seq_printf(m, "Ports: %d\n", ci->max_port);
+ seq_printf(m, "Channels: %d\n", bip->brd_chan_cnt);
#if 1
- len += sprintf (buffer + len, "Interface: %s -> %s\n",
- (char *) &bip->first_iname, (char *) &bip->last_iname);
+ seq_printf(m, "Interface: %s -> %s\n",
+ bip->first_iname, bip->last_iname);
#else
- len += sprintf (buffer + len, "Interface: <not available> 1st %p lst %p\n",
- (char *) &bip->first_iname, (char *) &bip->last_iname);
+ seq_printf(m, "Interface: <not available> 1st %p lst %p\n",
+ bip->first_iname, bip->last_iname);
#endif
- switch (bip->brd_pci_speed)
- {
- case BINFO_PCI_SPEED_33:
- spd = "33Mhz";
- break;
- case BINFO_PCI_SPEED_66:
- spd = "66Mhz";
- break;
- default:
- spd = "<not available>";
- break;
- }
- len += sprintf (buffer + len, "PCI Bus Speed: %s\n", spd);
- len += sprintf (buffer + len, "Release: %s\n", ci->release);
+ switch (bip->brd_pci_speed) {
+ case BINFO_PCI_SPEED_33:
+ spd = "33Mhz";
+ break;
+ case BINFO_PCI_SPEED_66:
+ spd = "66Mhz";
+ break;
+ default:
+ spd = "<not available>";
+ break;
+ }
+ seq_printf(m, "PCI Bus Speed: %s\n", spd);
+ seq_printf(m, "Release: %s\n", ci->release);
#ifdef SBE_PMCC4_ENABLE
- {
- extern int cxt1e1_max_mru;
-#if 0
- extern int max_chans_used;
- extern int cxt1e1_max_mtu;
-#endif
- extern int max_rxdesc_used, max_txdesc_used;
-
- len += sprintf (buffer + len, "\ncxt1e1_max_mru: %d\n", cxt1e1_max_mru);
+ {
+ extern int cxt1e1_max_mru;
#if 0
- len += sprintf (buffer + len, "\nmax_chans_used: %d\n", max_chans_used);
- len += sprintf (buffer + len, "cxt1e1_max_mtu: %d\n", cxt1e1_max_mtu);
-#endif
- len += sprintf (buffer + len, "max_rxdesc_used: %d\n", max_rxdesc_used);
- len += sprintf (buffer + len, "max_txdesc_used: %d\n", max_txdesc_used);
- }
-#endif
-
- OS_kfree (bip); /* cleanup */
-
- /***
- * How to be a proc read function
- * ------------------------------
- * Prototype:
- * int f(char *buffer, char **start, off_t offset,
- * int count, int *peof, void *dat)
- *
- * Assume that the buffer is "count" bytes in size.
- *
- * If you know you have supplied all the data you
- * have, set *peof.
- *
- * You have three ways to return data:
- * 0) Leave *start = NULL. (This is the default.)
- * Put the data of the requested offset at that
- * offset within the buffer. Return the number (n)
- * of bytes there are from the beginning of the
- * buffer up to the last byte of data. If the
- * number of supplied bytes (= n - offset) is
- * greater than zero and you didn't signal eof
- * and the reader is prepared to take more data
- * you will be called again with the requested
- * offset advanced by the number of bytes
- * absorbed. This interface is useful for files
- * no larger than the buffer.
- * 1) Set *start = an unsigned long value less than
- * the buffer address but greater than zero.
- * Put the data of the requested offset at the
- * beginning of the buffer. Return the number of
- * bytes of data placed there. If this number is
- * greater than zero and you didn't signal eof
- * and the reader is prepared to take more data
- * you will be called again with the requested
- * offset advanced by *start. This interface is
- * useful when you have a large file consisting
- * of a series of blocks which you want to count
- * and return as wholes.
- * (Hack by Paul.Russell@rustcorp.com.au)
- * 2) Set *start = an address within the buffer.
- * Put the data of the requested offset at *start.
- * Return the number of bytes of data placed there.
- * If this number is greater than zero and you
- * didn't signal eof and the reader is prepared to
- * take more data you will be called again with the
- * requested offset advanced by the number of bytes
- * absorbed.
- */
-
-#if 1
- /* #4 - interpretation of above = set EOF, return len */
- *eof = 1;
+ extern int max_chans_used;
+ extern int cxt1e1_max_mtu;
#endif
+ extern int max_rxdesc_used, max_txdesc_used;
+ seq_printf(m, "\ncxt1e1_max_mru: %d\n", cxt1e1_max_mru);
#if 0
- /*
- * #1 - from net/wireless/atmel.c RLD NOTE -there's something wrong with
- * this plagarized code which results in this routine being called TWICE.
- * The second call returns ZERO, resulting in hidden failure, but at
- * least only a single message set is being displayed.
- */
- if (len <= offset + length)
- *eof = 1;
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
- if (len < 0)
- len = 0;
-#endif
-
-#if 0 /* #2 from net/tokenring/olympic.c +
- * lanstreamer.c */
- {
- off_t begin = 0;
- int size = 0;
- off_t pos = 0;
-
- size = len;
- pos = begin + size;
- if (pos < offset)
- {
- len = 0;
- begin = pos;
- }
- *start = buffer + (offset - begin); /* Start of wanted data */
- len -= (offset - begin); /* Start slop */
- if (len > length)
- len = length; /* Ending slop */
- }
+ seq_printf(m, "\nmax_chans_used: %d\n", max_chans_used);
+ seq_printf(m, "cxt1e1_max_mtu: %d\n", cxt1e1_max_mtu);
#endif
-
-#if 0 /* #3 from
- * char/ftape/lowlevel/ftape-proc.c */
- len = strlen (buffer);
- *start = NULL;
- if (offset + length >= len)
- *eof = 1;
- else
- *eof = 0;
-#endif
-
-#if 0
- pr_info(">> proc_fs: returned len = %d., start %p\n", len, start); /* RLD DEBUG */
+ seq_printf(m, "max_rxdesc_used: %d\n", max_rxdesc_used);
+ seq_printf(m, "max_txdesc_used: %d\n", max_txdesc_used);
+ }
#endif
-/***
- using NONE: returns = 314.314.314.
- using #1 : returns = 314, 0.
- using #2 : returns = 314, 0, 0.
- using #3 : returns = 314, 314.
- using #4 : returns = 314, 314.
-***/
+ kfree(bip);
- return len;
+ pr_devel(">> proc_fs: finished\n");
+ return 0;
}
-/* initialize the /proc subsystem for the specific SBE driver */
-
-int __init
-sbecom_proc_brd_init (ci_t * ci)
+/*
+ * seq_file wrappers for procfile show routines.
+ */
+static int sbecom_proc_open(struct inode *inode, struct file *file)
{
- struct proc_dir_entry *e;
- char dir[7 + SBE_IFACETMPL_SIZE + 1];
-
- /* create a directory in the root procfs */
- snprintf(dir, sizeof(dir), "driver/%s", ci->devname);
- ci->dir_dev = proc_mkdir(dir, NULL);
- if (!ci->dir_dev)
- {
- pr_err("Unable to create directory /proc/driver/%s\n", ci->devname);
- goto fail;
- }
- e = create_proc_read_entry ("info", S_IFREG | S_IRUGO,
- ci->dir_dev, sbecom_proc_get_sbe_info, ci);
- if (!e)
- {
- pr_err("Unable to create entry /proc/driver/%s/info\n", ci->devname);
- goto fail;
- }
- return 0;
-
-fail:
- sbecom_proc_brd_cleanup (ci);
- return 1;
+ return single_open(file, sbecom_proc_get_sbe_info, PDE_DATA(inode));
}
-#else /*** ! CONFIG_PROC_FS ***/
+static const struct file_operations sbecom_proc_fops = {
+ .open = sbecom_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
-/* stubbed off dummy routines */
-
-void
-sbecom_proc_brd_cleanup (ci_t * ci)
-{
-}
-
-int __init
-sbecom_proc_brd_init (ci_t * ci)
+/*
+ * Initialize the /proc subsystem for the specific SBE driver
+ */
+int __init sbecom_proc_brd_init(ci_t *ci)
{
- return 0;
-}
-
-#endif /*** CONFIG_PROC_FS ***/
+ char dir[7 + SBE_IFACETMPL_SIZE + 1];
+ snprintf(dir, sizeof(dir), "driver/%s", ci->devname);
+ ci->dir_dev = proc_mkdir(dir, NULL);
+ if (!ci->dir_dev) {
+ pr_err("Unable to create directory /proc/driver/%s\n", ci->devname);
+ goto fail;
+ }
+
+ if (!proc_create_data("info", S_IFREG | S_IRUGO, ci->dir_dev,
+ &sbecom_proc_fops, ci)) {
+ pr_err("Unable to create entry /proc/driver/%s/info\n", ci->devname);
+ goto fail;
+ }
+ return 0;
-/*** End-of-File ***/
+fail:
+ sbecom_proc_brd_cleanup(ci);
+ return 1;
+}
projects / firefly-linux-kernel-4.4.55.git / commitdiff