iio: bmg160: Remove i2c_client from data struct
authorMarkus Pargmann <mpa@pengutronix.de>
Wed, 12 Aug 2015 14:50:05 +0000 (16:50 +0200)
committerJonathan Cameron <jic23@kernel.org>
Sun, 16 Aug 2015 09:51:22 +0000 (10:51 +0100)
i2c_client variable is not really used anymore in the core driver. It is
only used to get the device to make proper outputs.

This patch replaces all i2c_client usage through direct usage of the
device pointer.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
drivers/iio/gyro/bmg160.c

index d3c5300a38624aa202e7a1e4a643278a26bd48e2..e73f7f27692a2078373b7bd3838c2978817f0e64 100644 (file)
@@ -98,7 +98,7 @@
 #define BMG160_AUTO_SUSPEND_DELAY_MS   2000
 
 struct bmg160_data {
-       struct i2c_client *client;
+       struct device *dev;
        struct regmap *regmap;
        struct iio_trigger *dready_trig;
        struct iio_trigger *motion_trig;
@@ -148,7 +148,7 @@ static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
 
        ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n");
+               dev_err(data->dev, "Error writing reg_pmu_lpw\n");
                return ret;
        }
 
@@ -178,7 +178,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
 
        ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error writing reg_pmu_bw\n");
+               dev_err(data->dev, "Error writing reg_pmu_bw\n");
                return ret;
        }
 
@@ -194,13 +194,13 @@ static int bmg160_chip_init(struct bmg160_data *data)
 
        ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error reading reg_chip_id\n");
+               dev_err(data->dev, "Error reading reg_chip_id\n");
                return ret;
        }
 
-       dev_dbg(&data->client->dev, "Chip Id %x\n", val);
+       dev_dbg(data->dev, "Chip Id %x\n", val);
        if (val != BMG160_CHIP_ID_VAL) {
-               dev_err(&data->client->dev, "invalid chip %x\n", val);
+               dev_err(data->dev, "invalid chip %x\n", val);
                return -ENODEV;
        }
 
@@ -219,14 +219,14 @@ static int bmg160_chip_init(struct bmg160_data *data)
        /* Set Default Range */
        ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error writing reg_range\n");
+               dev_err(data->dev, "Error writing reg_range\n");
                return ret;
        }
        data->dps_range = BMG160_RANGE_500DPS;
 
        ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error reading reg_slope_thres\n");
+               dev_err(data->dev, "Error reading reg_slope_thres\n");
                return ret;
        }
        data->slope_thres = val;
@@ -235,7 +235,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
        ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
                                 BMG160_INT1_BIT_OD, 0);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error updating bits in reg_int_en_1\n");
+               dev_err(data->dev, "Error updating bits in reg_int_en_1\n");
                return ret;
        }
 
@@ -243,7 +243,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
                           BMG160_INT_MODE_LATCH_INT |
                           BMG160_INT_MODE_LATCH_RESET);
        if (ret < 0) {
-               dev_err(&data->client->dev,
+               dev_err(data->dev,
                        "Error writing reg_motion_intr\n");
                return ret;
        }
@@ -257,17 +257,17 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
        int ret;
 
        if (on)
-               ret = pm_runtime_get_sync(&data->client->dev);
+               ret = pm_runtime_get_sync(data->dev);
        else {
-               pm_runtime_mark_last_busy(&data->client->dev);
-               ret = pm_runtime_put_autosuspend(&data->client->dev);
+               pm_runtime_mark_last_busy(data->dev);
+               ret = pm_runtime_put_autosuspend(data->dev);
        }
 
        if (ret < 0) {
-               dev_err(&data->client->dev,
+               dev_err(data->dev,
                        "Failed: bmg160_set_power_state for %d\n", on);
                if (on)
-                       pm_runtime_put_noidle(&data->client->dev);
+                       pm_runtime_put_noidle(data->dev);
 
                return ret;
        }
@@ -286,7 +286,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
                                 BMG160_INT_MAP_0_BIT_ANY,
                                 (status ? BMG160_INT_MAP_0_BIT_ANY : 0));
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error updating bits reg_int_map0\n");
+               dev_err(data->dev, "Error updating bits reg_int_map0\n");
                return ret;
        }
 
@@ -296,7 +296,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
                ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
                                   data->slope_thres);
                if (ret < 0) {
-                       dev_err(&data->client->dev,
+                       dev_err(data->dev,
                                "Error writing reg_slope_thres\n");
                        return ret;
                }
@@ -305,7 +305,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
                                   BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
                                   BMG160_INT_MOTION_Z);
                if (ret < 0) {
-                       dev_err(&data->client->dev,
+                       dev_err(data->dev,
                                "Error writing reg_motion_intr\n");
                        return ret;
                }
@@ -321,7 +321,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
                                           BMG160_INT_MODE_LATCH_INT |
                                           BMG160_INT_MODE_LATCH_RESET);
                        if (ret < 0) {
-                               dev_err(&data->client->dev,
+                               dev_err(data->dev,
                                        "Error writing reg_rst_latch\n");
                                return ret;
                        }
@@ -335,7 +335,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
        }
 
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error writing reg_int_en0\n");
+               dev_err(data->dev, "Error writing reg_int_en0\n");
                return ret;
        }
 
@@ -352,7 +352,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
                                 BMG160_INT_MAP_1_BIT_NEW_DATA,
                                 (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error updating bits in reg_int_map1\n");
+               dev_err(data->dev, "Error updating bits in reg_int_map1\n");
                return ret;
        }
 
@@ -361,7 +361,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
                                   BMG160_INT_MODE_NON_LATCH_INT |
                                   BMG160_INT_MODE_LATCH_RESET);
                if (ret < 0) {
-                       dev_err(&data->client->dev,
+                       dev_err(data->dev,
                                "Error writing reg_rst_latch\n");
                                return ret;
                }
@@ -375,7 +375,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
                                   BMG160_INT_MODE_LATCH_INT |
                                   BMG160_INT_MODE_LATCH_RESET);
                if (ret < 0) {
-                       dev_err(&data->client->dev,
+                       dev_err(data->dev,
                                "Error writing reg_rst_latch\n");
                                return ret;
                }
@@ -384,7 +384,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
        }
 
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error writing reg_int_en0\n");
+               dev_err(data->dev, "Error writing reg_int_en0\n");
                return ret;
        }
 
@@ -414,7 +414,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
                        ret = regmap_write(data->regmap, BMG160_REG_RANGE,
                                           bmg160_scale_table[i].dps_range);
                        if (ret < 0) {
-                               dev_err(&data->client->dev,
+                               dev_err(data->dev,
                                        "Error writing reg_range\n");
                                return ret;
                        }
@@ -440,7 +440,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
 
        ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error reading reg_temp\n");
+               dev_err(data->dev, "Error reading reg_temp\n");
                bmg160_set_power_state(data, false);
                mutex_unlock(&data->mutex);
                return ret;
@@ -470,7 +470,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
        ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
                               2);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error reading axis %d\n", axis);
+               dev_err(data->dev, "Error reading axis %d\n", axis);
                bmg160_set_power_state(data, false);
                mutex_unlock(&data->mutex);
                return ret;
@@ -813,7 +813,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
                           BMG160_INT_MODE_LATCH_INT |
                           BMG160_INT_MODE_LATCH_RESET);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error writing reg_rst_latch\n");
+               dev_err(data->dev, "Error writing reg_rst_latch\n");
                return ret;
        }
 
@@ -879,7 +879,7 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
 
        ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
        if (ret < 0) {
-               dev_err(&data->client->dev, "Error reading reg_int_status2\n");
+               dev_err(data->dev, "Error reading reg_int_status2\n");
                goto ack_intr_status;
        }
 
@@ -916,7 +916,7 @@ ack_intr_status:
                                   BMG160_INT_MODE_LATCH_INT |
                                   BMG160_INT_MODE_LATCH_RESET);
                if (ret < 0)
-                       dev_err(&data->client->dev,
+                       dev_err(data->dev,
                                "Error writing reg_rst_latch\n");
        }
 
@@ -1021,7 +1021,7 @@ static int bmg160_probe(struct i2c_client *client,
 
        data = iio_priv(indio_dev);
        i2c_set_clientdata(client, indio_dev);
-       data->client = client;
+       data->dev = &client->dev;
 
        ret = bmg160_chip_init(data);
        if (ret < 0)
@@ -1188,7 +1188,7 @@ static int bmg160_runtime_suspend(struct device *dev)
 
        ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
        if (ret < 0) {
-               dev_err(&data->client->dev, "set mode failed\n");
+               dev_err(data->dev, "set mode failed\n");
                return -EAGAIN;
        }